{
"Scanner": {
"path": "/bmc/kepler/Scanner/:Id",
"interfaces": {
"bmc.kepler.Scanner": {
"properties": {
"Value": {
"usage": [
"CSR"
]
},
"Status": {}
}
},
"bmc.kepler.Scanner.Aggregate": {
"properties": {
"AggregateOffset": {
"usage": [
"CSR"
]
},
"AggregateStatus": {}
}
},
"bmc.kepler.Release.Scanner": {
"methods": {
"TraceDebounce": {
"cmdName": "tracedebounce",
"req": {
"Action": {
"baseType": "String",
"enum":[
"start",
"stop"
],
"displayDescription": "debounce trace action.start: start tracing debounce value,expressions and result. stop: stop tracing debounce value,expressions and result"
}
},
"displayDescription": "trace debounce value,expressions and result."
}
}
}
},
"properties": {
"ScanEnabled": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 1,
"enum": [
0,
1
],
"description": "Scanner使能状态, 0:Scanner未使能, 1:Scanner有效, 同步语法进行关联, 可以单点值、表达式、或从其他Scanner同步值, 但不能依赖成环"
},
"NominalValue": {
"usage": [
"CSR"
],
"baseType": "U64",
"description": "只有Scan Disabled时才使用, 扫描无效(初次扫描, 扫描失败, 禁用扫描)之后的默认值, 注意此值不能产生告警"
},
"Chip": {
"usage": [
"CSR"
],
"baseType": "String",
"description": "Scanner关联的器件对象"
},
"Size": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "读取数据的长度, 单位为Byte"
},
"Offset": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "1、对于简单器件, 偏移为实际的硬件器件偏移, 用于计算硬件的偏移地址, 读取硬件下不同地址的数据 2、对于SMC, 偏移为SMC命令字"
},
"Mask": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "从硬件读取的数据长度为Byte, 为了准确获取其中的某些bit, 读值需要与Mask按位与, 此操作需要器件支持;位读时掩码有效, 块读时掩码无效, 可置0"
},
"Period": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "Scanner扫描周期, 单位ms"
},
"Type": {
"usage": [
"CSR"
],
"baseType": "U8",
"enum": [
0,
1
],
"description": "读取方式, 0: 位读 1: 块读, 需要器件支持"
},
"Debounce": {
"usage": [
"CSR"
],
"baseType": "String",
"description": "引用的防抖对象"
},
"FailureDebounceCount": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 10,
"description": "Scanner扫描获取失败时Status的防抖次数, 失败超过防抖次数时将Status置为1, 参考V2防抖配置要求默认值为10次"
},
"SuccessDebounceCount": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 10,
"description": "Scanner扫描获取失败时Status的防抖次数, 失败状态下成功次数超过防抖次数时将Status置为0, 参考V2防抖配置要求默认值为10次"
}
}
},
"Accessor": {
"path": "/bmc/kepler/Accessor/:Id",
"interfaces": {
"bmc.kepler.Accessor": {
"properties": {
"Value": {
"usage": [
"CSR"
]
},
"Status": {},
"PrintableValue": {}
}
}
},
"properties": {
"Chip": {
"usage": [
"CSR"
],
"baseType": "String",
"description": "Accessor关联的器件对象"
},
"Size": {
"usage": [
"CSR"
],
"baseType": "U8",
"maximum": 64,
"description": "读取数据的长度, 单位为Byte"
},
"Offset": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "1、对于简单器件, 偏移为实际的硬件器件偏移, 用于计算硬件的偏移地址, 读取硬件下不同地址的数据 2、对于SMC, 偏移为SMC命令字"
},
"WriteOffset": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 4294967295,
"description": "器件写偏移。存在配置时,设置Accessor属性时使用该偏移。1、对于简单器件, 偏移为实际的硬件器件偏移, 用于计算硬件的偏移地址, 读取硬件下不同地址的数据 2、对于SMC, 偏移为SMC命令字"
},
"Mask": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "从硬件读取的数据长度为Byte, 为了准确获取其中的某些bit, 读值需要与Mask按位与, 此操作需要器件支持;位读时掩码有效, 块读时掩码无效, 可置0"
},
"Type": {
"usage": [
"CSR"
],
"baseType": "U8",
"enum": [
0,
1
],
"description": "读取方式, 0: 位读 1: 块读, 需要器件支持;仅块读场景更新PrintableValue"
},
"FailureDebounceCount": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 10,
"description": "Scanner扫描获取失败时Status的防抖次数, 失败超过防抖次数时将Status置为1, 参考V2防抖配置要求默认值为10次"
},
"SuccessDebounceCount": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 10,
"description": "Scanner扫描获取失败时Status的防抖次数, 失败状态下成功次数超过防抖次数时将Status置为0, 参考V2防抖配置要求默认值为10次"
}
}
},
"InnerBus": {
"path": "/bmc/kepler/Bus/InnerBus/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {
"AccessEnabled": {
"baseType": "U8",
"readOnly": true
},
"Timeout": {
"baseType": "U8",
"readOnly": true,
"default": 0
}
},
"methods": {
"SetAccessibility": {
"req": {
"Status": {
"baseType": "Boolean"
},
"DisableDuration": {
"baseType": "U16"
}
}
}
}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8"
}
}
},
"I2c": {
"path": "/bmc/kepler/Bus/I2c/:Id",
"interfaces": {
"bmc.kepler.Bus": {},
"bmc.kepler.Bus.BlockIO": {}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c通道号, 有效范围0~15"
},
"Speed": {
"usage": [
"CSR"
],
"baseType": "U16",
"enum": [
100,
400,
3400
],
"default": 100,
"description": "I2c速率, 单位K, 有效取值100,400"
},
"Mode": {
"usage": [
"CSR"
],
"baseType": "U8",
"enum": [
0,
1
],
"default": 0,
"description": "I2c主从模式, 0代表主, 1代表从"
},
"SlaveAddr": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "从模式地址"
},
"UseSmbus": {
"usage": [
"CSR"
],
"baseType": "U8",
"enum": [
0,
1
],
"default": 0,
"description": "使能Smbus协议, 0代表不使能, 1代表使能"
},
"MultiIO": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "管脚复用配置, 配置为255的时候为无效值"
}
}
},
"I3cOverLocalBus": {
"path": "/bmc/kepler/Bus/I3cOverLocalBus/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {
"AccessEnabled": {
"baseType": "U8",
"readOnly": true
},
"Timeout": {
"baseType": "U8",
"readOnly": true,
"default": 0
}
},
"methods": {
"SetAccessibility": {
"req": {
"Status": {
"baseType": "Boolean"
},
"DisableDuration": {
"baseType": "U16"
}
}
}
}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I3c控制器Id, 有效取值0~7"
},
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c/I3c通道号, 有效取值0~7"
},
"BaseAddr": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "I3c控制器基地址, 最大值不能超过0xFE"
},
"ChipSelect": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 1,
"description": "I3c控制器片选, 有效取值0~3"
}
}
},
"I2cOverLocalBus": {
"path": "/bmc/kepler/Bus/I2cOverLocalBus/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {
"AccessEnabled": {
"baseType": "U8",
"readOnly": true
},
"Timeout": {
"baseType": "U8",
"readOnly": true,
"default": 0
}
},
"methods": {
"SetAccessibility": {
"req": {
"Status": {
"baseType": "Boolean"
},
"DisableDuration": {
"baseType": "U16"
}
}
}
}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c控制器Id, 有效取值0~7"
},
"BusId": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c总线Id, 有效取值0~15"
},
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c/I3c通道号"
},
"BaseAddr": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "I2c控制器基地址"
},
"PreScale": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c时钟预设分频值"
},
"ChipSelect": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 1,
"description": "localbus片选,有效取值0~3,对应片选0~3"
},
"Enable16BitDataLength": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "数据长度是否启用16bit,0:不使用(默认值); 1:使用"
},
"Enable8BitWriteReadWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "数据读写位宽是否启用8bit,0:不使用,启用16bit位宽读写(默认值); 1:使用,启用8bit位宽读写"
}
}
},
"Hisport": {
"path": "/bmc/kepler/Bus/Hisport/:Id",
"interfaces": {
"bmc.kepler.Bus": {}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "Hisport的通道号, 有效范围0~127"
}
}
},
"LocalBus": {
"path": "/bmc/kepler/Bus/LocalBus/:Id",
"interfaces": {
"bmc.kepler.Bus": {}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "localbus片选,0:片选1 1:片选2 2:片选3 3:片选0"
},
"Width": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "localbus数据位宽, 0:8bit 1:16bit"
},
"AddrOffset": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "localbus地址偏移, 0:不偏移 1:偏移1bit"
},
"Acs": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "从地址有效到片选有效的时间。取值范围0~31,对应1~32个时钟周期"
},
"Csrp": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 65535,
"description": "读操作时的片选有效时间。取值范围0~511个时钟周期,至少为2个时钟周期"
},
"Aoe": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "地址有效到读使能有效的时间。取值范围0~31,对应1~32个时钟周期"
},
"OenPreCsn": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "读使能先于片选无效。取值范围0~1,0表示读使能后于片选无效,1表示读使能先于片选无效或同时无效"
},
"Coen": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "当OenPreCsn为0,表示片选无效到读使能无效的时间,当OenPreCsn为1,表示读使能无效到片选无效的时间。取值范围0~60个时钟周期,另外Coen的值小于等于Cl的值减去3"
},
"Cl": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "在复用情况下,表示从片选无效到Lale有效的时间,在非复用情况下,表示从片选无效到地址有效的时间。取值范围0~63个时钟周期,至少为3个时钟周期"
},
"Lale": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "在复用情况下,表示地址锁存的指示信号的有效时间。取值范围0~31个时钟周期,至少为3个时钟周期。另外当Lale为高电平是地址有效,当Lale为低电平时数据有效。"
},
"Cswp": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 65535,
"description": "写操作时的片选有效时间。取值范围0~511个时钟周期,至少为2个时钟周期"
},
"Awe": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "地址有效到写使能有效的时间。取值范围0~31,对应1~32个时钟周期"
},
"WenPreCsn": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "写使能先于片选无效。取值范围0~1,0表示写使能后于片选无效,1表示写使能先于片选无效或同时无效"
},
"Cwen": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "当WenPreCsn为0,表示片选无效到写使能无效的时间,当WenPreCsn为1,表示写使能无效到片选无效的时间。取值范围0~31个时钟周期,另外Cwen的值小于等于Cl的值减去3"
},
"Cdn": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "从片选无效到写数据无效的时间,写数据只能与片选同时无效或者在片选后无效。取值范围0~31个时钟周期,另外Cdn的值小于等于Cl的值减去3"
},
"Addr2DataNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "固定时序模式写时,Ale无效到数据有效的时间,如无单板约束则无需配置。取值范围0~7个时钟周期,至少为1个时钟周期,注意配置值不要超过Acs"
},
"LgtaSamp": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "从片选有效到开始采样外部ready(LGTA)的时间,如果从片选有效开始采,则设置此值为1。取值范围0~63个时钟周期,至少为1个时钟周期"
},
"Al": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "从地址有效到读写合一信号(lbctl)有效(如:默认为写,假设为高,则低有效)的时间。取值范围0~31,对应1~32个时钟周期"
},
"LnPreCsn": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "lbctl无效(lbctl无效值恢复到默认值,默认为写)。取值范围0~1,0表示lbctl后于Csn无效,1表示lbctl先于Csn无效或同时无效"
},
"Ln": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "当LnPreCsn为0,表示片选无效到lbctl无效的时间,当LnPreCsn为1,表示lbctl无效到片选无效的时间。取值范围0~60个时钟周期,另外Ln的值小于等于Cl的值减去3"
},
"Prc": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "page读时,非第一次读的时间。取值范围0~31个时钟周期,至少为1个时钟周期"
},
"Csn": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "在有外部ready的情况下,外部ready有效后的第三拍到片选无效的时间。取值范围0~63个时钟周期"
}
}
},
"Jtag": {
"path": "/bmc/kepler/Bus/Jtag/:Id",
"interfaces": {
"bmc.kepler.Bus": {},
"bmc.kepler.Bus.Jtag": {
"properties": {
"JlcTckRate": {
"usage": [
"CSR"
]
}
}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "jtag的通道号, 只支持0和1"
},
"ValidateTime": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 100,
"minimum": 100,
"maximum": 5000,
"description": "单位毫秒, 只有在cpld升级接口配置成RST_MODE才有效"
},
"TargetResetGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "用于CPLD复位的管脚"
},
"SecModeType": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "安全模式类型, 0:不启用 1:安全GPIO控制"
}
}
},
"JtagOverLocalBus": {
"path": "/bmc/kepler/Bus/JtagOverLocalBus/:Id",
"interfaces": {
"bmc.kepler.Bus": {}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "jtag的通道号, 只支持0和1"
},
"ValidateTime": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 100,
"minimum": 100,
"maximum": 5000,
"description": "单位毫秒, 只有在cpld升级接口配置成RST_MODE才有效"
},
"TargetResetGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "用于CPLD复位的管脚"
},
"LocalBusOffset": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "使用的localbus寄存器地址偏移"
},
"TckBit": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tck信号所在的bit位"
},
"TmsBit": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tms信号所在的bit位"
},
"TdoBit": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tdo信号所在的bit位"
},
"TdiBit": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tdi信号所在的bit位"
},
"SecModeType": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "安全模式类型, 0:不启用 1:安全GPIO控制"
}
}
},
"JtagOverGpio": {
"path": "/bmc/kepler/Bus/JtagOverGpio/:Id",
"interfaces": {
"bmc.kepler.Bus": {}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "jtag的通道号, 只支持0和1"
},
"ValidateTime": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 100,
"minimum": 100,
"maximum": 5000,
"description": "单位毫秒, 只有在cpld升级接口配置成RST_MODE才有效"
},
"TargetResetGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "用于CPLD复位的管脚"
},
"TckGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tck信号所在的管脚号"
},
"TmsGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tms信号所在的管脚号"
},
"TdoGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tdo信号所在的管脚号"
},
"TdiGpio": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "tdi信号所在的管脚号"
}
}
},
"Gpio": {
"path": "/bmc/kepler/Bus/Gpio/:Id",
"interfaces": {
"bmc.kepler.Bus": {}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚"
},
"Direction": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "极化方向"
},
"ReverseBit": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "0: 不变 1: 比特反转"
},
"InitialLevel": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "GPIO管脚初始输出电平,0:低 1:高;255:未配置(无效默认值);仅Direction为输出且单管脚模式(Id!=255)时生效;不配置则不改变管脚电平"
},
"Bit0GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit1GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit2GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit3GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit4GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit5GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit6GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
},
"Bit7GpioNum": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "gpio管脚, 只有在Id为255时有效, 单个配置为255时代表无效, 通过读接口时会获取到gpio管脚的电平状态"
}
}
},
"Eeprom": {
"path": "/bmc/kepler/Chip/Eeprom/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.EepromData": {},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"RwBlockSize": {
"usage": [
"CSR"
],
"baseType": "U16",
"description": "Eeprom单页的字byte数"
},
"WriteInterval": {
"usage": [
"CSR"
],
"baseType": "U16",
"description": "Eeprom单页写入后等待的时间, 单位ms"
}
}
},
"Smc": {
"path": "/bmc/kepler/Chip/Smc/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Smc器件实现Smc命令字长度, 单位Byte"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"DrvWriteDelay": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "在I2c总线下时单次写操作后等待的时间, 单位ms"
}
}
},
"Pca9545": {
"path": "/bmc/kepler/Chip/Pca9545/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ChipReset": {
"usage": [
"CSR"
],
"baseType": "String",
"description": "芯片复位关联的Accessor对象名"
}
}
},
"Pca9544": {
"path": "/bmc/kepler/Chip/Pca9544/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ChipReset": {
"usage": [
"CSR"
],
"baseType": "String",
"description": "芯片复位关联的Accessor对象名"
}
}
},
"Pca9555": {
"path": "/bmc/kepler/Chip/Pca9555/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
}
}
},
"Lm75": {
"path": "/bmc/kepler/Chip/Lm75/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"HighTempLimitation": {
"usage": [
"CSR"
],
"baseType": "U16",
"default": 65535,
"description": "高温门限值, 启动时软件自动写入0x03寄存器, 默认值0xffff表示不配置"
},
"LowTempLimitation": {
"usage": [
"CSR"
],
"baseType": "U16",
"default": 65535,
"description": "低温门限值, 启动时软件自动写入0x02寄存器, 默认值0xffff表示不配置"
}
}
},
"Chip": {
"path": "/bmc/kepler/Chip/Complex/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
},
"ChipType": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Chip.Aggregate": {
"properties": {
"Supported": {
"usage": [
"CSR"
]
},
"BaseOffset": {
"usage": [
"CSR"
]
},
"Length": {
"usage": [
"CSR"
]
},
"Period": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"WriteRetryTimes": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "写重试次数, 0代表不重试"
},
"ReadRetryTimes": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "读重试次数, 0代表不重试"
},
"DrvWriteDelay": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "在I2c/Hisport总线下时单次写操作后等待的时间, 单位ms"
},
"BusType": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "0:自动选择 1:I2c协议 2:I3c协议"
},
"SwitchSupported": {
"usage": [
"CSR"
],
"baseType": "Boolean",
"default": false,
"description": "器件连通性支持动态控制"
},
"RegisterConfig": {
"usage": [
"CSR"
],
"baseType": "Array",
"items": {
"$ref": "types.json#/defs/RegisterInfo"
},
"readOnly": true,
"description": "寄存器配置信息,用于初始化寄存器配置"
}
}
},
"CpldChip": {
"path": "/bmc/kepler/Chip/CpldChip/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Smc器件实现Smc命令字长度, 单位Byte"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"WriteRetryTimes": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "写重试次数, 0代表不重试"
},
"ReadRetryTimes": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "读重试次数, 0代表不重试"
},
"DrvWriteDelay": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "在I2c/Hisport总线下时单次写操作后等待的时间, 单位ms"
}
}
},
"SPIFlash": {
"path": "/bmc/kepler/Chip/SPIFlash/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
},
"bmc.kepler.Chip.FlashIO": {
"properties": {},
"methods": {
"Read": {
"privilege": [
"BasicSetting"
]
},
"Write": {
"privilege": [
"BasicSetting"
]
},
"Erase": {
"privilege": [
"BasicSetting"
]
},
"RawRead": {
"privilege": [
"BasicSetting"
]
},
"RawWrite": {
"privilege": [
"BasicSetting"
]
}
}
}
},
"properties": {
"ChipSelect": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "SPI片选"
},
"BytesPerPage": {
"usage": [
"CSR"
],
"default": 256,
"baseType": "U32",
"description": "Flash器件单页的byte数, 默认256"
},
"CommandSet": {
"usage": [
"CSR"
],
"baseType": "Dictionary",
"$ref": "types.json#/defs/SPIFlashCommandSet",
"description": "Flash器件通讯手册命令字"
}
}
},
"Vrd": {
"path": "/bmc/kepler/Chip/Vrd/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadWriteInterval": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "Vrd器件切页成功后等待的时间, 单位us"
}
}
},
"Ads78": {
"path": "/bmc/kepler/Chip/Ads78/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
}
}
},
"CpldRegister": {
"path": "/bmc/kepler/Chip/CpldRegister/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "器件地址, 十进制"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
}
}
},
"Cpld": {
"path": "/bmc/kepler/Chip/Cpld/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Chip.JtagTarget": {
"methods": {
"Upgrade": {
"privilege": [
"BasicSetting"
]
},
"Collect": {
"privilege": [
"BasicSetting"
]
},
"Verify": {
"privilege": [
"BasicSetting"
]
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
}
},
"I2cMux": {
"path": "/bmc/kepler/Mux/I2cMux/:Id",
"interfaces": {
"bmc.kepler.Mux.I2cMux": {
"properties": {}
}
},
"properties": {
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8"
}
}
},
"JtagSwitch": {
"properties": {
"Accessor": {
"usage": [
"CSR"
],
"baseType": "String"
},
"Delay": {
"usage": [
"CSR"
],
"baseType": "U32"
}
}
},
"JtagMux": {
"properties": {
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8"
}
}
},
"UartBus": {
"properties": {
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8"
},
"BaudRate": {
"usage": [
"CSR"
],
"baseType": "U32"
}
}
},
"Adc": {
"path": "/bmc/kepler/Bus/Adc/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {}
}
},
"properties": {
"ScanRate": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "ADC采样频率",
"default": 32768
},
"VoltRefSrc": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "参考电压类型: 0 外部参考电压 1 内部参考电压",
"maximum": 1,
"default": 1
},
"VoltRefVal": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "参考电压值, 单位毫伏",
"default": 2400
}
}
},
"Can": {
"path": "/bmc/kepler/Bus/Can/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "使用的can控制器, 有效取值范围0~1"
},
"MultiIO": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 255,
"description": "管脚复用配置, 配置为255的时候为无效值"
}
}
},
"I2cOverHisport": {
"path": "/bmc/kepler/Bus/I2cOverHisport/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "Hisport控制器Id, 有效取值范围0~1"
},
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "I2c通道Id"
}
}
},
"SPIOverHisport": {
"path": "/bmc/kepler/Bus/SPIOverHisport/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "Hisport控制器Id, 有效取值范围0~1"
},
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "SPI通道Id"
}
}
},
"JtagOverHisport": {
"path": "/bmc/kepler/Bus/JtagOverHisport/:Id",
"interfaces": {
"bmc.kepler.Bus": {
"properties": {}
}
},
"properties": {
"Id": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "Hisport控制器Id, 有效取值范围0~1"
},
"ChannelId": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "Jtag通道Id, 有效取值范围0~1"
}
}
},
"CanbusChip": {
"path": "/bmc/kepler/Chip/CanbusChip/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "7bit地址, CANID的组成部分"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 该参数实际无使用,无需配置"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "CAN报文发送超时时间, 单位秒"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "CAN报文接收超时时间, 单位秒"
},
"Speed": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "CAN总线仲裁段和数据段的波特率, 单位K, 波特率1M则配置1000"
},
"Protocol": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "6bit协议号, CANID的组成部分"
},
"CanIdMask": {
"usage":[
"CSR"
],
"baseType": "U32",
"default": 8388480,
"description": "CAN报文接收掩码"
}
}
},
"Rtc": {
"path": "/bmc/kepler/Chip/Rtc/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 该参数实际无使用,无需配置"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"WriteRetryTimes": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "写重试次数, 0代表不重试"
},
"ReadRetryTimes": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "读重试次数, 0代表不重试"
},
"DrvWriteDelay": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 0,
"description": "在I2c/Hisport总线下时单次写操作后等待的时间, 单位ms"
}
}
},
"Ina": {
"path": "/bmc/kepler/Chip/PowerMeter/Ina/:Id",
"interfaces": {
"bmc.kepler.Chip": {
"properties": {
"HealthStatus": {
"usage": [
"CSR"
]
},
"PowerStatus": {
"usage": [
"CSR"
]
},
"SelfTestResult": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Chip.BlockIO": {},
"bmc.kepler.Chip.BitIO": {},
"bmc.kepler.Chip.PowerMeter.Ina": {
"properties": {
"PowerMultiplier": {
"usage": [
"CSR"
]
},
"PowerDivisor": {
"usage": [
"CSR"
]
},
"ChipModel": {
"usage": [
"CSR"
]
}
}
},
"bmc.kepler.Release.TraceChip": {
"properties": {},
"methods": {
"TraceChip": {
"privilege": [
"DiagnoseMgmt"
],
"cmdName": "tracechip"
}
}
},
"bmc.kepler.Release.Chip": {
"methods": {
"Read": {
"cmdName": "read",
"req": {
"Offset": {
"displayDescription": "The byte offset of the register relative to the device base address"
},
"Length": {
"displayDescription": "The length of data to be read."
}
},
"displayDescription": "Read the specified length of content from the offset position of the chip by byte."
}
}
}
},
"properties": {
"Address": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "器件地址, 该参数实际无使用,无需配置"
},
"AddrWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "地址宽度, 单位Byte, 该参数实际无使用,无需配置"
},
"OffsetWidth": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "偏移宽度, 代表Offset字段占用的byte数, 该参数实际无使用,无需配置"
},
"WriteTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "写入寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadTmout": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取寄存器的超时时间, 该参数实际无使用,无需配置"
},
"ReadWriteInterval": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "该参数实际无使用,无需配置"
},
"ConfigurationRegister": {
"usage": [
"CSR"
],
"baseType": "U16",
"description": "配置寄存器, 必选参数,"
},
"CalibrationRegister": {
"usage": [
"CSR"
],
"baseType": "U16",
"description": "校准寄存器, 必选参数,"
}
}
},
"MidAvg": {
"properties": {
"WindowSize": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"DefaultValue": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"IsSigned": {
"usage": [
"CSR"
],
"baseType": "Boolean"
}
}
},
"Median": {
"properties": {
"WindowSize": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"DefaultValue": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"IsSigned": {
"usage": [
"CSR"
],
"baseType": "Boolean"
}
}
},
"Cont": {
"properties": {
"Num": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"DefaultValue": {
"usage": [
"CSR"
],
"baseType": "U32"
}
}
},
"ContBin": {
"properties": {
"NumH": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"NumL": {
"usage": [
"CSR"
],
"baseType": "U32"
},
"DefaultValue": {
"usage": [
"CSR"
],
"baseType": "U32"
}
}
},
"None": {
"properties": {
"DefaultValue": {
"usage": [
"CSR"
],
"baseType": "U32"
}
}
},
"DftPca9545": {
"path": "/bmc/kepler/Manufacture/SelfTest/DftPca9545/${Id}",
"interfaces": {
"bmc.kepler.Manufacture": {
"properties": {
"Type": {
"usage": [
"CSR"
]
},
"Id": {
"usage": [
"CSR"
]
},
"Slot": {
"usage": [
"CSR"
]
},
"Param": {},
"DeviceNum": {
"usage": [
"CSR"
]
},
"ItemName": {
"usage": [
"CSR"
]
},
"PrompteReady": {
"usage": [
"CSR"
]
},
"PrompteFinish": {
"usage": [
"CSR"
]
},
"ProcessPeriod": {
"usage": [
"CSR"
]
},
"Status": {}
}
}
},
"properties": {
"RefChip": {
"baseType": "String",
"usage": [
"CSR"
]
}
}
},
"DftPca9555": {
"path": "/bmc/kepler/Manufacture/SelfTest/DftPca9555/${Id}",
"interfaces": {
"bmc.kepler.Manufacture": {
"properties": {
"Type": {
"usage": [
"CSR"
]
},
"Id": {
"usage": [
"CSR"
]
},
"Slot": {
"usage": [
"CSR"
]
},
"Param": {},
"DeviceNum": {
"usage": [
"CSR"
]
},
"ItemName": {
"usage": [
"CSR"
]
},
"PrompteReady": {
"usage": [
"CSR"
]
},
"PrompteFinish": {
"usage": [
"CSR"
]
},
"ProcessPeriod": {
"usage": [
"CSR"
]
},
"Status": {}
}
}
},
"properties": {
"RefChip": {
"baseType": "String",
"usage": [
"CSR"
]
}
}
},
"DftLm75": {
"path": "/bmc/kepler/Manufacture/SelfTest/DftLm75/${Id}",
"interfaces": {
"bmc.kepler.Manufacture": {
"properties": {
"Type": {
"usage": [
"CSR"
]
},
"Id": {
"usage": [
"CSR"
]
},
"Slot": {
"usage": [
"CSR"
]
},
"Param": {},
"DeviceNum": {
"usage": [
"CSR"
]
},
"ItemName": {
"usage": [
"CSR"
]
},
"PrompteReady": {
"usage": [
"CSR"
]
},
"PrompteFinish": {
"usage": [
"CSR"
]
},
"ProcessPeriod": {
"usage": [
"CSR"
]
},
"Status": {}
}
}
},
"properties": {
"RefChip": {
"baseType": "String",
"usage": [
"CSR"
]
}
}
},
"DftI2c": {
"path": "/bmc/kepler/Manufacture/SelfTest/DftI2c/${Id}",
"interfaces": {
"bmc.kepler.Manufacture": {
"properties": {
"Type": {
"usage": [
"CSR"
]
},
"Id": {
"usage": [
"CSR"
]
},
"Slot": {
"usage": [
"CSR"
]
},
"Param": {},
"DeviceNum": {
"usage": [
"CSR"
]
},
"ItemName": {
"usage": [
"CSR"
]
},
"PrompteReady": {
"usage": [
"CSR"
]
},
"PrompteFinish": {
"usage": [
"CSR"
]
},
"ProcessPeriod": {
"usage": [
"CSR"
]
},
"Status": {}
}
}
},
"properties": {
"RefChip": {
"baseType": "String",
"usage": [
"CSR"
]
},
"Offset": {
"usage": [
"CSR"
],
"baseType": "U32",
"default": 0
},
"Size": {
"usage": [
"CSR"
],
"baseType": "U8",
"default": 1
}
}
},
"DftCan": {
"path": "/bmc/kepler/Manufacture/SelfTest/DftCan/${Id}",
"interfaces": {
"bmc.kepler.Manufacture": {
"properties": {
"Type": {
"usage": [
"CSR"
]
},
"Id": {
"usage": [
"CSR"
]
},
"Slot": {
"usage": [
"CSR"
]
},
"Param": {},
"DeviceNum": {
"usage": [
"CSR"
]
},
"ItemName": {
"usage": [
"CSR"
]
},
"PrompteReady": {
"usage": [
"CSR"
]
},
"PrompteFinish": {
"usage": [
"CSR"
]
},
"ProcessPeriod": {
"usage": [
"CSR"
]
},
"Status": {}
}
}
},
"properties": {
"RefChip": {
"baseType": "String",
"usage": [
"CSR"
]
}
}
},
"Mock": {
"path": "/bmc/kepler/Debug/Mock",
"interfaces": {
"bmc.kepler.Debug.Mock": {}
}
},
"SmcDfxInfo": {
"properties": {
"Chip": {
"usage": [
"CSR"
],
"baseType": "String",
"description": "引用的Smc Chip对象"
},
"Offset": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "偏移地址(opcode)"
},
"Size": {
"usage": [
"CSR"
],
"baseType": "U8",
"description": "SmcDfxInfo的长度"
},
"Period": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "读取周期, 单位ms"
},
"SmcVersion": {
"usage": [
"CSR"
],
"baseType": "U32",
"description": "支持的Smc最低版本, 用于版本检测"
},
"Config": {
"baseType": "Dictionary",
"usage": [
"CSR"
],
"$ref": "types.json#/defs/DfxConfigDict",
"description": "SmcDfxInfo中每个byte与对应硬件信号的对应关系, 可通过mask按照单byte或者bit位进行对应"
},
"Mapping": {
"baseType": "Dictionary",
"usage": [
"CSR"
],
"$ref": "types.json#/defs/MappingDict",
"description": "Scanner与硬件信号的对应关系, 通过配置表达式获取值, 硬件信号名称为Config中的名称"
},
"Context": {
"baseType": "Dictionary",
"usage": [
"CSR"
],
"$ref": "types.json#/defs/ContextDict",
"description": "预留扩展字段"
},
"CriticalByteIndexes": {
"usage": [
"CSR"
],
"baseType": "U8[]"
}
}
}
}