| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
[lldb] Use std::make_shared where possible (NFC) (#150714) This is a continuation of 68fd102, which did the same thing but only for StopInfo. Using make_shared is both safer and more efficient: - With make_shared, the object and the control block are allocated together, which is more efficient. - With make_shared, the enable_shared_from_this base class is properly linked to the control block before the constructor finishes, so shared_from_this() will be safe to use (though still not recommended during construction). | 1 年前 | |
[LLDB] Add a StackFrameRecognizer for the Darwin specific abort_with_payload… (#101365) This is used by various system routines (the capabilities checker and dyld to name a few) to add extra color to an abort. This patch adds a frame recognizer so people can easily see the details, and also adds the information to the ExtendedCrashInformation dictionary. I also had to rework how the dictionary is held; previously it was created on demand, but that was inconvenient since it meant all the entries had to be produced at that same time. That didn't work for the recognizer. | 1 年前 | |
[lldb] Turn lldb_private::Status into a value type. (#106163) This patch removes all of the Set.* methods from Status. This cleanup is part of a series of patches that make it harder use the anti-pattern of keeping a long-lives Status object around and updating it while dropping any errors it contains on the floor. This patch is largely NFC, the more interesting next steps this enables is to: 1. remove Status.Clear() 2. assert that Status::operator=() never overwrites an error 3. remove Status::operator=() Note that step (2) will bring 90% of the benefits for users, and step (3) will dramatically clean up the error handling code in various places. In the end my goal is to convert all APIs that are of the form ResultTy DoFoo(Status& error) to llvm::Expected<ResultTy> DoFoo() How to read this patch? The interesting changes are in Status.h and Status.cpp, all other changes are mostly perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git grep -l SetErrorString lldb/source) plus the occasional manual cleanup. | 1 年前 | |
[lldb] Replace default bodies of special member functions with = default; Replace default bodies of special member functions with = default; $ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-equals-default' -fix , https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-equals-default.html Differential revision: https://reviews.llvm.org/D104041 | 5 年前 | |
[lldb] Turn lldb_private::Status into a value type. (#106163) This patch removes all of the Set.* methods from Status. This cleanup is part of a series of patches that make it harder use the anti-pattern of keeping a long-lives Status object around and updating it while dropping any errors it contains on the floor. This patch is largely NFC, the more interesting next steps this enables is to: 1. remove Status.Clear() 2. assert that Status::operator=() never overwrites an error 3. remove Status::operator=() Note that step (2) will bring 90% of the benefits for users, and step (3) will dramatically clean up the error handling code in various places. In the end my goal is to convert all APIs that are of the form ResultTy DoFoo(Status& error) to llvm::Expected<ResultTy> DoFoo() How to read this patch? The interesting changes are in Status.h and Status.cpp, all other changes are mostly perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git grep -l SetErrorString lldb/source) plus the occasional manual cleanup. | 1 年前 | |
[lldb] Replace default bodies of special member functions with = default; Replace default bodies of special member functions with = default; $ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-equals-default' -fix , https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-equals-default.html Differential revision: https://reviews.llvm.org/D104041 | 5 年前 | |
[lldb] Turn lldb_private::Status into a value type. (#106163) This patch removes all of the Set.* methods from Status. This cleanup is part of a series of patches that make it harder use the anti-pattern of keeping a long-lives Status object around and updating it while dropping any errors it contains on the floor. This patch is largely NFC, the more interesting next steps this enables is to: 1. remove Status.Clear() 2. assert that Status::operator=() never overwrites an error 3. remove Status::operator=() Note that step (2) will bring 90% of the benefits for users, and step (3) will dramatically clean up the error handling code in various places. In the end my goal is to convert all APIs that are of the form ResultTy DoFoo(Status& error) to llvm::Expected<ResultTy> DoFoo() How to read this patch? The interesting changes are in Status.h and Status.cpp, all other changes are mostly perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git grep -l SetErrorString lldb/source) plus the occasional manual cleanup. | 1 年前 | |
[lldb] Replace default bodies of special member functions with = default; Replace default bodies of special member functions with = default; $ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-equals-default' -fix , https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-equals-default.html Differential revision: https://reviews.llvm.org/D104041 | 5 年前 | |
[lldb] Turn lldb_private::Status into a value type. (#106163) This patch removes all of the Set.* methods from Status. This cleanup is part of a series of patches that make it harder use the anti-pattern of keeping a long-lives Status object around and updating it while dropping any errors it contains on the floor. This patch is largely NFC, the more interesting next steps this enables is to: 1. remove Status.Clear() 2. assert that Status::operator=() never overwrites an error 3. remove Status::operator=() Note that step (2) will bring 90% of the benefits for users, and step (3) will dramatically clean up the error handling code in various places. In the end my goal is to convert all APIs that are of the form ResultTy DoFoo(Status& error) to llvm::Expected<ResultTy> DoFoo() How to read this patch? The interesting changes are in Status.h and Status.cpp, all other changes are mostly perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git grep -l SetErrorString lldb/source) plus the occasional manual cleanup. | 1 年前 | |
[lldb] Replace default bodies of special member functions with = default; Replace default bodies of special member functions with = default; $ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-equals-default' -fix , https://clang.llvm.org/extra/clang-tidy/checks/modernize-use-equals-default.html Differential revision: https://reviews.llvm.org/D104041 | 5 年前 | |
[lldb] Move ValueObject into its own library (NFC) (#113393) ValueObject is part of lldbCore for historical reasons, but conceptually it deserves to be its own library. This does introduce a (link-time) circular dependency between lldbCore and lldbValueObject, which is unfortunate but probably unavoidable because so many things in LLDB rely on ValueObject. We already have cycles and these libraries are never built as dylibs so while this doesn't improve the situation, it also doesn't make things worse. The header includes were updated with the following command: find . -type f -exec sed -i.bak "s%include \"lldb/Core/ValueObject%include \"lldb/ValueObject/ValueObject%" '{}' \; | 1 年前 | |
[lldb] Fix source line annotations for libsanitizers traces (#154247) When providing allocation and deallocation traces, the ASan compiler-rt runtime already provides call addresses ( TracePCType::Calls). On Darwin, system sanitizers (libsanitizers) provides return address. It also discards a few non-user frames at the top of the stack, because these internal libmalloc/libsanitizers stack frames do not provide any value when diagnosing memory errors. Introduce and add handling for TracePCType::ReturnsNoZerothFrame to cover this case and enable libsanitizers traces line-level testing. rdar://157596927 --- Commit 1 is a mechanical refactoring to introduce and adopt TracePCType enum to replace pcs_are_call_addresses bool. It preserve the current behavior: pcs_are_call_addresses: false -> TracePCType::Returns (default) true -> TracePCType::Calls Best reviewed commit by commit. | 11 个月前 | |
[LLDB][NFC][Reliability] Fix uninitialized variables from Coverity scan Improve LLDB reliability by fixing the following "uninitialized variables" static code inspection warnings from scan.coverity.com: 1094796 1095721 1095728 1095737 1095741 1095756 1095779 1095789 1095805 1214552 1229457 1232475 1274006 1274010 1293427 1364800 1364802 1364804 1364812 1364816 1374902 1374909 1384975 1399312 1420451 1431704 1454230 1454554 1454615 1454579 1454594 1454832 1457759 1458696 1461909 1467658 1487814 1487830 1487845 Differential Revision: https://reviews.llvm.org/D130098 | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 1 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 11 个月前 | ||
| 3 年前 |