Closed
【问题】GetVRegSize在部分产品上接口获取失败返回0导致算子计算失败 #548
wuxueningAdd on  25 days agoClosed at  21 days ago
wuxueningCollaborators
25 days ago Create

问题背景

PR !1031 将 host 侧 GetVRegSize 由硬编码 256B 改为经 PlatformAscendC::GetVecRegLen() 接口动态获取后,部分产品上该接口获取不到向量寄存器宽度(返回 0),算子以 0 作除数(如 elePerVreg = vRegSize / sizeof(T))导致 tiling 计算失败。

问题内容

include/op_common/op_host/util/platform_util.h 中 GetVRegSize 直接透传 GetVecRegLen() 返回值,部分产品上该接口返回 0,下游以 0 做除数导致算子计算失败。

修复方案

对 GetVecRegLen() 返回值增加判零兜底:返回 0 时回落默认值 256U(OP_LOGD 记录便于定位)。接口可正常获取的产品行为不变(950=256B、5162A=32B)。

同步更新 GetVRegSize.md 返回值说明。

验收标准

  • 接口可正常获取的产品行为不变;
  • 接口获取失败的产品上 GetVRegSize 返回 256(不再返回 0),算子 tiling 正常;
  • 下游算子仓(math/nn/cv/transformer)5162A 编包不受影响。
likedislike
WwuxueningCollaborators
25 days ago Associated pull request
WwuxueningCollaborators
25 days ago Modify description of issue
CANN-robotCANN-robotCollaborators
25 days ago Close issue
CANN-robotCANN-robotCollaborators
25 days ago Added label: resolved
ren-botaoCollaborators
21 days ago Comments:

/assign @wuxuening

likedislike
CANN-robotCANN-robotCollaborators
21 days ago Assign wuxuening as responsible person
WwuxueningCollaborators
21 days ago changed custom category from 任务 to 缺陷
WwuxueningCollaborators
21 days ago Reopen issue
wuxueningCollaborators
21 days ago Comments:

问题定位

  • 接口位置:include/op_common/op_host/util/platform_util.h host 侧 GetVRegSize(const T *context)
  • 引入来源:PR !1031 将该接口由硬编码 256U 改为透传 PlatformAscendC::GetVecRegLen() 返回值
  • 失败表现:部分产品上 GetVecRegLen() 返回 0,GetVRegSize 透传 0 → 下游 tiling 以 0 作除数(如 elePerVreg = vRegSize / sizeof(T)、repeatTimes = CeilDiv(totalLen, oneRepeat))→ tiling 计算失败,算子执行报错
  • 影响面:host 侧公共接口的全部下游调用方(ops-math/ops-nn/ops-cv/ops-transformer 各仓经 tiling 使用 vRegSize 的算子);kernel 侧 op_kernel/platform_util.h 为编译期宏实现(__CCE_AICORE__ == 310/920 取 AscendC::VECTOR_REG_WIDTH,其余 256U),不受本问题影响

根因分析

  1. GetVecRegLen() 的取值来源是 tiling context 携带的平台信息(platform info)中的向量寄存器宽度属性,该属性按产品填充,并非全产品覆盖;
  2. 平台信息未携带该属性的产品上,接口以 0 作为"不可用"的隐式返回值,无错误信号;
  3. PR !1031 假设返回值恒有效、未做判零防御,将"接口能力的产品差异"引入为"运行时除零"缺陷。

本质是接口契约缺陷(失败以 0 隐式表达)与调用侧无防御(无判零兜底)叠加所致。

处理方案(两阶段,均已合入 master)

阶段一:判零兜底(!1056,commit 2c92ec2)

GetVecRegLen() 返回 0 时回落默认值 256U(OP_LOGD 记录便于定位),接口可正常获取的产品行为不变。同步更新 GetVRegSize.md 返回值说明("平台信息或接口获取失败时默认返回256bytes")。

阶段二:按架构隔离取值(!1059,commit aed23b2,最终方案)

不再依赖 GetVecRegLen() 返回值,按 GetCurNpuArch() 架构直接取值:

auto ascendcPlatform = platform_ascendc::PlatformAscendC(platformInfoPtr);
if (ascendcPlatform.GetCurNpuArch() == Ops::Base::DAV_5162) {
    return 32U;   // Ascend5162A:VL = 32B
}
return 256U;      // 其余平台:256B

向量寄存器宽度本质上是按架构确定的静态属性,按架构取值从根上消除"接口返回 0"这一失败模式。

验证情况

  • 双平台取值符合预期(950=256B、5162A=32B);
  • 下游仓 5162A 编包验证通过(ops-cv resize 类算子 --soc=ascend5162a 编译零 error,tiling 链路使用该接口);
  • 建议 issue 关闭前确认下游各仓(math/nn/cv/transformer)已同步至含 !1059 的 opbase 基线。
likedislike
Rren-botaoCollaborators
21 days ago changed custom state from 待办的 to 已解决
Rren-botaoCollaborators
21 days ago Close issue
WwuxueningCollaborators
21 days ago changed custom state from 已解决 to 待办的
WwuxueningCollaborators
21 days ago Reopen issue
WwuxueningCollaborators
21 days ago changed custom state from 待办的 to 已解决
WwuxueningCollaborators
21 days ago Close issue