| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
rockchip: add support for Graperain G3568 v2 The Graperain G3568 v2 is an RK3568-based development board, just like the RK3568-EVB. It always uses soldered connections between the GR3568CV2 core board and the RK3568BV2/GR3568BV2 I/O board. The G3568 board has multiple hardware revisions, and we currently support v2 (I/O board). Specification: - SoC: RockChip RK3568 ARM64 (4 cores) - eMMC: 16-128 GB - RAM: 2-16 GB - Power: DC 12V 2A - Ethernet: 2x RTL8211F RGMII (10/100/1000 Mbps) - Wireless radio: 802.11b/g/n/ac dual-band - LED: Power: AlwaysOn User: GPIO - Button: ESC: SARADC/0 <1100k µV> MENU: SARADC/0 <1400k µV> VOL-: SARADC/0 <430k µV> VOL+: SARADC/0 <50k µV> Power/Reset: PMIC RK809 - CAN CAN/1: 4-pin (PH 2.0) - PWM PWM/4: Backlight PWM/5: Backlight PWM/7: IR Receiver - UART: UART/2: Debug TTL - 1500000 8N1 (1.25mm) UART/3: TTL (PH 2.0) UART/4: TTL (PH 2.0) UART/8: AP6356S Bluetooth UART/9: TTL (PH 2.0) - I2C: I2C/0: PMIC RK809 I2C/1: Touchscreen I2C/4: Camera I2C/5: RTC@51 PCF8563 - I2S: I2S/0: HDMI Sound I2S/1: RK809 Audio Codec I2S/3: AP6356S Bluetooth Sound - SDMMC: SDMMC/0: microSD (TF) slot SDMMC/2: AP6356S SDIO WiFi card - Camera: 1x CSI - Video: HDMI / DSI0 (MIPI/LVDS) / DSI1 (MIPI/EDP) - Audio: HDMI / MIC / Speaker / SPDIF / 3.5mm Headphones / AP6356S Bluetooth - USB: USB 2.0 HOST x2 USB 2.0 OTG x1 (shared with USB 3.0 OTG/HOST) USB 3.0 HOST x1 USB 3.0 OTG/HOST x1 - SATA: 1x SATA 3.0 with Power/4-pin - PCIe: 1x PCIe 3.0 x2 (x4 connecter) Link: - https://image.chukouplus.com/upload/C_153/product_file/20211022/6daddec9e400458816dd4c57ba807fc3.pdf - https://blog.gov.cooking/archives/research-graperain-g3568-v2-and-flash.html Signed-off-by: Coia Prant <coiaprant@gmail.com> | 2 个月前 | |
khadas-vim3: bump mainline u-boot to v2026.04, move boot-order patch Move BOOTBRANCH_BOARD/BOOTPATCHDIR from v2025.04 to v2026.04 (the tag other meson64 boards — odroidn2, nanopik2-s905 — already build on). The board's 'SD -> USB -> NVMe -> eMMC' boot-order patch (meson64-boot-usb-nvme-scsi-first) moves with it into patch/u-boot/v2026.04/board_khadas-vim3/; verified it still applies cleanly (the BOOT_TARGET_DEVICES block in meson64.h is unchanged at v2026.04). v2025.04 patch dir stays for sakurapi-rk3308b. Signed-off-by: Igor Pecovnik <igor@armbian.com> | 2 个月前 | |
mekotronics-r58s2: Make recovery key enter rockusb mode | 1 个月前 | |
mkspi: add missing u-boot dtsi (cherry picked from commit 0e626dc0bde81dac0ea83a869cb7c11cf539eb2b) | 2 个月前 | |
nanopi-m5: migrate to mainline U-Boot v2026.04 Switches from the u-boot-radxa-rk35xx legacy fork to mainline v2026.04 with BOOT_SCENARIO=vendor-spl-blobs. Adds SD/SPI/UFS install helpers, rewrites BOOT_TARGETS to 'mmc0 scsi nvme pxe dhcp', and expands KERNEL_TARGET to current,edge,vendor. | 4 个月前 | |
nanopi-r3s-lts: bump uboot to v2026.04 | 4 个月前 | |
nanopi-r76s: bump mainline u-boot to v2026.04 and drop vendor-branch gates (#9869) * nanopi-r76s: bump mainline u-boot to v2026.04 and drop vendor-branch gates Drop the BRANCH==vendor early-returns in both post_family_config__nanopi_r76s_use_mainline_uboot and pre_config_uboot_target__nanopi_r76s_patch_rockchip_common_boot_order so mainline u-boot is taken on every kernel branch, and bump BOOTBRANCH/BOOTPATCHDIR from v2026.01 to v2026.04. The R76S board support patch is still carried locally since the board is not yet in u-boot upstream. Signed-off-by: SuperKali <hello@superkali.me> * nanopi-r76s: refresh u-boot v2026.04 patch and flip boot order Reformat board support patch with proper format-patch headers, set mmc1 (SD) before mmc0 (eMMC) to match upstream Linux DTS aliases. --------- Signed-off-by: SuperKali <hello@superkali.me> | 3 个月前 | |
replace patch From: headers across the framework with something meaningful | 26 天前 | |
rockchip64: bump some boards u-boot to v2026.04 (#9662) * rockchip64: bump some boards u-boot to v2026.04 * OrangePi4 LTS * Radxa Rockpi-E * Dusun DSOM 010R * rk3318-box tv box series * get rid of disabled u-boot patch * rockchip64: fix minor mistakes in CSC boards defconfig/dts | 4 个月前 | |
Add support for Photonicat2 board with USB hub watchdog - Introduced a USB hub watchdog service to fix USB quirk for photonicat2 - Updated U-Boot version to v2026.04 for photonicat2 - Add maintainer information for photonicat2 | 4 个月前 | |
rockchip: upgrade u-boot to v2026.04 (#9663) | 4 个月前 | |
rockchip64: bump some boards u-boot to v2026.04 (#9662) * rockchip64: bump some boards u-boot to v2026.04 * OrangePi4 LTS * Radxa Rockpi-E * Dusun DSOM 010R * rk3318-box tv box series * get rid of disabled u-boot patch * rockchip64: fix minor mistakes in CSC boards defconfig/dts | 4 个月前 | |
rock-5-itx: link upstream kernel commit in pcie3 refclk u-boot patch (#9861) Add a reference to Heiko's Linux mainline commit e684f02492f9 that introduced the pcie30_port{0,1}_refclk gated-fixed-clock on this board, so reviewers of the U-Boot dtsi override can see the kernel-side rationale. Suggested by @rpardini on PR #9848. Signed-off-by: SuperKali <hello@superkali.me> | 3 个月前 | |
rockchip: upgrade u-boot to v2026.04 (#9663) | 4 个月前 | |
rockchip: migrate xt-q8l-v10 uboot patches | 4 个月前 | |
youyeetoo-r1-v3: bump mainline u-boot to v2026.04 Move the board off the local v2025.10 patch chain to v2026.04. The two staging patches (defconfig + upstream dts) apply unchanged on the new base; the v2025.10 board patch dir is dropped. Signed-off-by: SuperKali <hello@superkali.me> | 1 个月前 | |
u-boot/rockchip-rk3588: add Youyeetoo YY3588 mainline v2026.04 support Carry the board DTS as merged in the rockchip dts64 tree, which is not yet in any kernel release nor in U-Boot's OF_UPSTREAM sync, plus a defconfig on the generic EVB target and a u-boot.dtsi shim dropping the gated-fixed-clock PCIe3 refclk U-Boot has no driver for. Signed-off-by: SuperKali <hello@superkali.me> | 2 个月前 | |
mekotronics-r58s2: Make recovery key enter rockusb mode | 1 个月前 | |
mixtile-blade3: edge: u-boot: bump to 2026.07 + update DT - edge: u-boot: switch to mainline ATF (for working HDMI-RX) - update DT from FUSB302+etc enabled one from rk64-7.1 - this still uses the rock-5b board.c file for FUSB302 fail -> ok fixup - fix for working UMS (using the data-usb-c port) - fixes for building bleedingedge (also with mainline uboot) - re-enable edge BRANCH for this board, it's half decent now | 1 个月前 | |
mekotronics-r58s2: Make recovery key enter rockusb mode | 1 个月前 | |
u-boot: v2026.04: prepare patching dir for v2026.04 - fileenv patch (same as v2026.01) - fdt_fixup_ethernet logging patch (same as v2026.01) - 0000.patching_config.yaml: defconfig/dt_upstream_rockchip/dt_uboot - notable in v2026.04: - dt-rebasing bumped up to v6.18 (which has NPU nodes) - this allows us to share complete DTs between kernel and u-boot via symlinks - Kwiboo had a go at LWIP which should be usable now; Kwiboo rocks. | 6 个月前 | |
u-boot: 2026.04: drop #warnings in fdt_fixup_ethernet logging patch - those were added to ensure that code was actually being compiled - we're pretty sure now, so avoid spurious warnings during compilation Signed-off-by: Ricardo Pardini <ricardo@pardini.net> | 4 个月前 | |
orangepi5: rewrite uboot patches against v2026.04-rc3 | 6 个月前 | |
rockchip: upgrade u-boot to v2026.04 (#9663) | 4 个月前 | |
u-boot: v2026.04: backport btrfs zstd short-extent decompression fix Backport the short-extent handling from the v2026.07 pool copy (commit 70c5d7458) into the v2026.04 pool, as that commit asked. The v2026.04 decompress_zstd() rejected any zstd frame that decompressed to fewer bytes than ram_bytes ("ret < dlen -> return -1"), but the caller btrfs_read_extent_reg() deliberately zero-fills a short tail ("if (ret < dsize) memset(...)"). A file whose final compressed extent is not sector-aligned (compressible tail, size % 4096 != 0) therefore failed to read: "BTRFS: An error occurred while reading file" and autoboot falls back to TFTP. Observed on ODROID-N2 (meson) reading a zstd-compressed kernel from btrfs; a byte-identical file on rockchip read fine only because its independent btrfs compression produced no short extent. Update both copies applied from this pool: the shared general-fix-btrfs-zstd-decompression.patch and the board_helios64/ copy (helios64 pins BOOTPATCHDIR=v2026.04/board_helios64 and applies only that directory, so it needs its own updated copy). Match decompress_zlib()/decompress_lzo(): return the actual decompressed length (capped at dlen), error only on a real zstd error, and let the read path zero-fill the remainder. Fixes zstd-btrfs boot reads for the v2026.04 pool boards (odroidn2, odroidhc4, nanopi-m5, helios64, ...). Assisted-by: Claude:claude-opus-4.8 | 1 个月前 | |
u-boot v2026.04: add UFS support for RK3576 Y. Charkov's UFS v5 series (Kwiboo/u-boot ufs-v5, not yet upstream), a Linux mainline DT cherry-pick, and a controller hard-reset workaround. Moved up from board_radxa-rock-4d/ since the SPL gap is SoC-wide. | 4 个月前 | |
uboot v2026.04: rewrite patches | 5 个月前 | |
u-boot/rockchip-rk3588: raise CPU clocks through SCMI on mainline Mainline U-Boot leaves the CPU clusters on the 24 MHz oscillator until kernel cpufreq init, a 23 MiB initramfs unpack took 64 seconds on a big core. Raise them to 1008 MHz via SCMI, general since every rk3588 board on v2026.04 is affected. Signed-off-by: SuperKali <hello@superkali.me> | 2 个月前 | |
u-boot v2026.04: add UFS support for RK3576 Y. Charkov's UFS v5 series (Kwiboo/u-boot ufs-v5, not yet upstream), a Linux mainline DT cherry-pick, and a controller hard-reset workaround. Moved up from board_radxa-rock-4d/ since the SPL gap is SoC-wide. | 4 个月前 | |
u-boot v2026.04: add UFS support for RK3576 Y. Charkov's UFS v5 series (Kwiboo/u-boot ufs-v5, not yet upstream), a Linux mainline DT cherry-pick, and a controller hard-reset workaround. Moved up from board_radxa-rock-4d/ since the SPL gap is SoC-wide. | 4 个月前 | |
u-boot v2026.04: add UFS support for RK3576 Y. Charkov's UFS v5 series (Kwiboo/u-boot ufs-v5, not yet upstream), a Linux mainline DT cherry-pick, and a controller hard-reset workaround. Moved up from board_radxa-rock-4d/ since the SPL gap is SoC-wide. | 4 个月前 | |
rockchip: upgrade u-boot to v2026.04 (#9663) | 4 个月前 | |
u-boot v2026.04: add UFS support for RK3576 Y. Charkov's UFS v5 series (Kwiboo/u-boot ufs-v5, not yet upstream), a Linux mainline DT cherry-pick, and a controller hard-reset workaround. Moved up from board_radxa-rock-4d/ since the SPL gap is SoC-wide. | 4 个月前 | |
u-boot v2026.04: add UFS support for RK3576 Y. Charkov's UFS v5 series (Kwiboo/u-boot ufs-v5, not yet upstream), a Linux mainline DT cherry-pick, and a controller hard-reset workaround. Moved up from board_radxa-rock-4d/ since the SPL gap is SoC-wide. | 4 个月前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 2 个月前 | ||
| 2 个月前 | ||
| 1 个月前 | ||
| 2 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 3 个月前 | ||
| 26 天前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 3 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 1 个月前 | ||
| 2 个月前 | ||
| 1 个月前 | ||
| 1 个月前 | ||
| 1 个月前 | ||
| 6 个月前 | ||
| 4 个月前 | ||
| 6 个月前 | ||
| 4 个月前 | ||
| 1 个月前 | ||
| 4 个月前 | ||
| 5 个月前 | ||
| 2 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 |