#ifndef myoptions_h
#define myoptions_h
/*******************************************************
Copy this file in the project root directory (next to the yoRadio.ino file)
Uncomment the lines you need, to override the default value and set the values according to the connected equipment.
The connection tables are located here https://github.com/e2002/yoradio#connection-tables
********************************************************/
//#define LED_BUILTIN 255 /* Onboard LED Pin (turn OFF by default) */
//#define LED_INVERT false /* Invert Onboard LED? */
#define L10N_LANGUAGE EN /* Language (EN, RU). More info in yoRadio/locale/displayL10n_(en|ru).h */
/* DSP_MODEL. See description/available values in https://github.com/e2002/yoradio/wiki/Available-display-models */
/* This option is required. Use DSP_DUMMY if no display is connected */
#define DSP_MODEL DSP_DUMMY
/*
* !!! Important !!!
* if you use colored TFT displays with the esp32 wroom, due to lack of memory, you must modify the file Arduino/libraries/AsyncTCP/src/AsyncTCP.cpp
* replace the line 221
* xTaskCreateUniversal(_async_service_task, "async_tcp", 8192 * 2, NULL, 3, &_async_service_task_handle, CONFIG_ASYNC_TCP_RUNNING_CORE);
* with
* xTaskCreateUniversal(_async_service_task, "async_tcp", 8192 / 2, NULL, 3, &_async_service_task_handle, CONFIG_ASYNC_TCP_RUNNING_CORE);
*/
/******************************************/
/* VSPI PINS. SCL(SCK, CLK) must be connected to pin 18
SDA(MOSI, DIN, SDI) must be connected to pin 23
for ESP32-S3 see ESP32-S3 Pin Reference http://wiki.fluidnc.com/en/hardware/ESP32-S3_Pin_Reference*/
//#define TFT_CS 5 /* SPI CS pin */
//#define TFT_RST 15 /* SPI RST pin. set to -1 and connect to Esp EN pin */
//#define TFT_DC 4 /* SPI DC/RS pin */
/* HSPI PINS. SCL(SCK, CLK) must be connected to pin 14
SDA(MOSI, DIN, SDI) must be connected to pin 13 */
//#define DSP_HSPI false /* Use HSPI for display */
/******************************************/
/* NEXTION */
//#define NEXTION_RX 255 /* Nextion RX pin */
//#define NEXTION_TX 255 /* Nextion TX pin */
/* I2C PINS */
//#define I2C_SDA 21 /* I2C SDA pin. It is best to connect to pin 21. */
//#define I2C_SCL 22 /* I2C SCL pin. It is best to connect to pin 22. */
//#define I2C_RST -1 /* I2C RST pin. Set to -1 if not used */
/* I2S DAC */
//#define I2S_DOUT 27 /* DIN connection. Should be set to 255 if the board is not used */
//#define I2S_BCLK 26 /* BCLK Bit clock */
//#define I2S_LRC 25 /* WSEL Left Right Clock */
/******************************************/
/* VS1053 VSPI PINS. VS1053 SCK must be connected to pin 18
VS1053 MISO must be connected to pin 19
VS1053 MOSI must be connected to pin 23 */
//#define VS1053_CS 255 /* XCS pin. Should be set to 255 if the board is not used */
//#define VS1053_DCS 25 /* XDCS pin. */
//#define VS1053_DREQ 26 /* DREQ pin. */
//#define VS1053_RST -1 /* XRESET pin. Set to -1 if connected to Esp EN pin */
/* VS1053 HSPI PINS. VS1053 SCK must be connected to pin 14
VS1053 MISO must be connected to pin 12
VS1053 MOSI must be connected to pin 13 */
//#define VS_HSPI false /* Use HSPI for VS */
/******************************************/
/* ENCODER */
//#define ENC_BTNL 255 /* Left rotation */
//#define ENC_BTNB 255 /* Encoder button */
//#define ENC_BTNR 255 /* Right rotation */
//#define ENC_INTERNALPULLUP true /* Enable the weak pull up resistors */
//#define ENC_HALFQUARD true /* Experiment with it */
/******************************************/
/* SDCARD */
/* MISO is the same as D0, MOSI is the same as D1 */
/* SD VSPI PINS. SD SCK must be connected to pin 18
SD MISO must be connected to pin 19
SD MOSI must be connected to pin 23 */
/* SD HSPI PINS. SD SCK must be connected to pin 14
SD MISO must be connected to pin 12
SD MOSI must be connected to pin 13 */
//#define SDC_CS 255 /* SDCARD CS pin */
//#define SD_HSPI false /* use HSPI for SD (miso=12, mosi=13, clk=14) instead of VSPI (by default) */
/* RTC */
//#define RTC_MODULE RTC_MODULE_UNDEFINED /* one of DS3231, DS1307, RTC_MODULE_UNDEFINED(default) */
//#define RTC_SDA 255 /* RTC_SDA */
//#define RTC_SCL 255 /* RTC_SCL */
/* ENCODER2 */
//#define ENC2_BTNL 255 /* Left rotation */
//#define ENC2_BTNB 255 /* Encoder button */
//#define ENC2_BTNR 255 /* Right rotation */
//#define ENC2_INTERNALPULLUP true /* Enable the weak pull up resistors */
//#define ENC2_HALFQUARD false /* (true, false, 255) Experiment with it */
/******************************************/
/* BUTTONS */
//#define BTN_LEFT 255 /* VolDown, Prev */
//#define BTN_CENTER 255 /* Play, Stop, Show playlist */
//#define BTN_RIGHT 255 /* VolUp, Next */
//#define BTN_UP 255 /* Prev, Move Up */
//#define BTN_DOWN 255 /* Next, Move Down */
//#define BTN_INTERNALPULLUP true /* Enable the weak pull up resistors */
//#define BTN_LONGPRESS_LOOP_DELAY 200 /* Delay between calling DuringLongPress event */
//#define BTN_CLICK_TICKS 300 /* Event Timing https://github.com/mathertel/OneButton#event-timing */
//#define BTN_PRESS_TICKS 500 /* Event Timing https://github.com/mathertel/OneButton#event-timing */
//#define BTN_MODE 255 /* MODE switcher */
/******************************************/
/* LCD DISPLAY 1602 */
//#define LCD_RS 255 /* RS Pin */
//#define LCD_E 255 /* E Pin */
//#define LCD_D4 255 /* D4 Pin */
//#define LCD_D5 255 /* D5 Pin */
//#define LCD_D6 255 /* D6 Pin */
//#define LCD_D7 255 /* D7 Pin */
/******************************************/
/* TOUCHSCREEN */
//#define TS_MODEL TS_MODEL_UNDEFINED /* See description/available values in yoRadio/src/core/options.h */
/* Resistive SPI touch screen */
/* TS VSPI PINS. CLK must be connected to pin 18
DIN must be connected to pin 23
DO must be connected to pin 19
IRQ - not connected */
//#define TS_CS 255 /* Touch screen CS pin */
/* TS HSPI PINS. CLK must be connected to pin 14
DIN must be connected to pin 13
DO must be connected to pin 12
IRQ - not connected */
//#define TS_HSPI false /* Use HSPI for Touch screen */
/* Capacitive I2C touch screen */
//#define TS_SDA 33
//#define TS_SCL 32
//#define TS_INT 21
//#define TS_RST 25
/******************************************/
/* Other settings. */
//#define DTYPE INITR_BLACKTAB /* ST7735 display submodel */
/* Could be one of: */
/* INITR_BLACKTAB 1.8' https://aliexpress.com/item/1005002822797745.html */
/* (See this note If INITR_BLACKTAB have a noisy line on one side of the screen https://github.com/e2002/yoradio#note-if-initr_blacktab-dsp-have-a-noisy-line-on-one-side-of-the-screen-then-in-adafruit_st7735cpp ) */
/* INITR_144GREENTAB // 1.44' https://aliexpress.com/item/1005002822797745.html */
/* INITR_MINI160x80 // 0.96' 160x80 ST7735S https://???? */
/* INITR_GREENTAB */
/* INITR_REDTAB */
//#define MUTE_PIN 255 /* MUTE Pin */
//#define MUTE_VAL HIGH /* Write this to MUTE_PIN when player is stopped */
//#define BRIGHTNESS_PIN 255 /* Pin for adjusting the brightness of the display (output 0 - 3v3) */
//#define PLAYER_FORCE_MONO false /* mono option on boot - false stereo, true mono */
//#define I2S_INTERNAL false /* If true - use esp32 internal DAC */
//#define ROTATE_90 false /* Optional 90 degree rotation for square displays */
//#define WAKE_PIN 255 /* Wake Pin (for manual wakeup from sleep mode. can match with BTN_XXXX, ENC_BTNB, ENC2_BTNB. must be one of: 0,2,4,12,13,14,15,25,26,27,32,33,34,35,36,39) */
/* For sample #define ENC_BTNB 36 - next line - #define WAKE_PIN ENC_BTNB */
//#define LIGHT_SENSOR 255 /* Light sensor */
//#define AUTOBACKLIGHT(x) *function* /* Autobacklight function. See options.h for example */
//#define DSP_INVERT_TITLE true /* Invert title colors for OLED displays ? */
/******************************************/
/* IR control */
//#define IR_PIN 255
//#define IR_TIMEOUT 80 /* see kTimeout description in IRremoteESP8266 example https://github.com/crankyoldgit/IRremoteESP8266/blob/master/examples/IRrecvDumpV2/IRrecvDumpV2.ino */
/******************************************/
#endif