| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
feat: major architecture overhaul — context management, smart truncation, agent discipline Phase 1: Tool result externalization - ToolResultRef + ToolResultStore: large tool outputs cached to disk - Hot zone inflated from disk, cold zone uses summaries Phase 2: Turn-aware context windowing - TurnTracker: tracks conversation turns (user message → completion) - Budgeted windowing operates at turn granularity - Cold turns: only user question + assistant conclusion retained - Synthesized outcomes for turns without assistant text Phase 3: Smart per-tool truncation - bash: preserve error lines, skip verbose build logs - read_file: threshold raised to 2000 lines (prevents multi-read cycles) - First read of any file forces full content (ignores offset/limit) - edit_file returns compact diff + file outline after edit Agent discipline: - Sleep loop detection (warn at 2, block at 3+) - Repeated command detection (normalized, warn at 2, block at 3+) - Same-file multi-edit blocking (threshold 4) - Re-read soft reminder (not blocking) - Over-verification detection (3+ consecutive check commands) - HTTP 200 detection → stop verifying - 429 rate limit retry with exponential backoff (up to 5 retries) - Loop detection allows retry after edit (fix-then-retry is not a loop) - Intercepted/blocked calls don't count toward step limit - Bash pipe/cat detection with redirect to proper tools System prompt: - Restored v1.3.1 proven rules + new additions - ACT DON'T INSTRUCT / BE CONCISE / ONE SIGNAL IS ENOUGH - COMMAND DISCIPLINE / ERROR HANDLING sections - Glob wildcard guidance - Tech-stack neutral (zero specific tool/language names) Project context: - Added pom.xml, build.gradle, requirements.txt, composer.json, CMakeLists.txt to descriptors - Cross-session context: previous session turns injected into system prompt - Conversation history loaded on startup (not fresh each session) - Active services detection: port scanning on startup + URL extraction from bash output - Frontend hot-reload hint when dev server detected UX improvements: - TTFT per LLM call (not cumulative), removed from status bar - Spinner shows last tool name: "After read_file, thinking..." - Tool call streaming: shows file_path/command as args stream in - Turn completion summary: "✻ Completed in N steps, Xs" - Streaming markdown: trim incomplete backtick/bold tokens - Pangu spacing (CJK-ASCII) - Code block styling refresh - Append input during streaming (Enter sends additional context) - UTF-8 safe string truncation (char boundary check) Tooling: - edit_file: atomic_write retry on rename failure (dev server file locks) - edit_file: suggested fix on old_string mismatch - glob: rewritten pattern parser (handles absolute paths, **/ splits) - LLM request logging to ~/.atomcode/logs/ - Datalog analyzer script (scripts/analyze_datalogs.py) with --deep mode (Claude Code) Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> | 6 个月前 | |
feat(tuix): higher-res welcome mascot (13×6) + overflow-safe two-column layout Redraw the welcome cat from the reference art at CELLS_WIDE=13 (was 9): at 9 cells the two eyes merged into one central blob and the ears were flat; 13×6 (≈13×12 px, near-square in cells) resolves two pointed ears + two eyes with highlights. The reference had a solid background, so it was pre-processed by flood-filling the border background to transparency (enclosed eyes survive) before running scripts/gen_mascot.py (CELLS_WIDE bumped to 13, preprocessing documented). Layout: the welcome compose math is already parameterised on MASCOT_WIDTH, so wider/taller scales cleanly — EXCEPT the two-column tips threshold used a hardcoded min_right=24 that underestimated the widest tip, so two-column engaged before the tips fit and the emulator hard-wrapped them (worse with the wider mascot, but pre-existing). Derive min_right from the ACTUAL widest tip row so two-column only engages when the tips fit; below that, stack. Adds welcome_rows_never_exceed_width (no composed row exceeds the width, 50–120 cols). Refactor: extract the (top,bottom)→Cell half-block choice into a free mascot_cell() fn and test its four branches directly (transparent-top→▄ etc.), instead of relying on the current art happening to contain each pixel kind. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Provider-URL: https://gitcode.com/atomgit_atomcode/atomcode | 3 个月前 | |
chore: revert install scripts default version to v5.0.2 | 2 个月前 | |
chore: revert install scripts default version to v5.0.2 | 2 个月前 | |
build: 发布管线集成 webui 前端构建（npm 缺失时回退已提交的 dist） Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> | 4 个月前 | |
build: 发布管线集成 webui 前端构建（npm 缺失时回退已提交的 dist） Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> | 4 个月前 | |
build: 发布管线集成 webui 前端构建（npm 缺失时回退已提交的 dist） Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> | 4 个月前 | |
build: 发布管线集成 webui 前端构建（npm 缺失时回退已提交的 dist） Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> | 4 个月前 | |
build: 发布管线集成 webui 前端构建（npm 缺失时回退已提交的 dist） Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> | 4 个月前 | |
chore: add one-click dev environment setup script scripts/setup.sh 支持 macOS / Linux，自动安装系统依赖、rustup 工具链、 rustfmt/clippy，可选 --release 构建验证和 --cross 交叉编译 target。 Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> | 6 个月前 | |
build: add macOS codesign + notarize for atomcode release binary New scripts/sign-macos.sh: - codesign with Developer ID (hardened runtime + RFC 3161 timestamp) - ditto-zip + notarytool submit --wait - skips atomcode-daemon per project decision (user-facing launcher only) - preflight checks: identity in keychain, notarytool profile valid - env overrides for identity, profile, and skip-notarize release.sh now calls sign-macos.sh on \$DIST before tar.gz packaging, so the released .tar.gz contains a signed + notarized atomcode binary. Skip via ATOMCODE_SKIP_SIGN=1. One-time setup required (per-machine): xcrun notarytool store-credentials atomcode-notary \\ --apple-id <email> --team-id T949H383MF \\ --password <app-specific-password> Limitations: tar.gz can't carry a stapled ticket, so Gatekeeper queries Apple online on first run. For offline-valid tickets, package into .dmg or .pkg and staple (future work). Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> | 6 个月前 | |
fix(scripts): test-all.sh 构建失败文案分流 + 删冗余判定 + smoke 补部分失败场景 跟进 !787 code-review 的三个低优项: #1 文案分流:cargo 退出非 0 且 FAILED==0 时,旧文案一律写"no tests counted", 但 --workspace 下常见"crate A 测试全过、crate B 编译失败"——此时 PASSED>0, 报告里 "Passed: N" 与 "no tests counted" 自相矛盾。改为按 PASSED 分流:==0 才说 no tests counted;>0 说"N test(s) passed but the build/run did not fully complete"。 退出码两种都仍是 1(判定本就正确,只修误导文案)。 #2 删冗余:第二个 guard 的 || [ "$cargo_status" -ne 0 ] 是死条件——能走到这里且 cargo!=0 必然 FAILED>0(FAILED==0 的非 0 已被上一 guard 拦截),恒被 FAILED>0 覆盖。 收成 if [ "$FAILED" -gt 0 ],消掉"改上面 guard 就静默改行为"的隐患。 #6 smoke 补第 4 场景 partial_failure:fake cargo 先出 crate-a 的 test result: ok + "... ok" 行、再出 crate-b 的 error[...]、退出 101,断言退出码 1 且报告写 "build did not fully complete"——锁死 #1 的分流行为。 bash -n 语法过;smoke 4 场景全绿(compile/test/all-pass/partial)。 Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Provider-URL: https://gitcode.com/atomgit_atomcode/atomcode | 3 个月前 | |
fix(scripts): test-all.sh 构建失败文案分流 + 删冗余判定 + smoke 补部分失败场景 跟进 !787 code-review 的三个低优项: #1 文案分流:cargo 退出非 0 且 FAILED==0 时,旧文案一律写"no tests counted", 但 --workspace 下常见"crate A 测试全过、crate B 编译失败"——此时 PASSED>0, 报告里 "Passed: N" 与 "no tests counted" 自相矛盾。改为按 PASSED 分流:==0 才说 no tests counted;>0 说"N test(s) passed but the build/run did not fully complete"。 退出码两种都仍是 1(判定本就正确,只修误导文案)。 #2 删冗余:第二个 guard 的 || [ "$cargo_status" -ne 0 ] 是死条件——能走到这里且 cargo!=0 必然 FAILED>0(FAILED==0 的非 0 已被上一 guard 拦截),恒被 FAILED>0 覆盖。 收成 if [ "$FAILED" -gt 0 ],消掉"改上面 guard 就静默改行为"的隐患。 #6 smoke 补第 4 场景 partial_failure:fake cargo 先出 crate-a 的 test result: ok + "... ok" 行、再出 crate-b 的 error[...]、退出 101,断言退出码 1 且报告写 "build did not fully complete"——锁死 #1 的分流行为。 bash -n 语法过;smoke 4 场景全绿(compile/test/all-pass/partial)。 Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Provider-URL: https://gitcode.com/atomgit_atomcode/atomcode | 3 个月前 | |
feat(headless): 默认静默 + -v / --verbose — Claude Code -p style 干净输出 用户反馈：Claude Code 的 -p 模式输出只有最终回复，干净。AtomCode 之前虽然 把工具日志/tokens 摘要从 stdout 移到了 stderr，但终端默认会同时显示 stdout+stderr，视觉上仍然夹杂 [tool→ ...]、[tokens] ...、[done] ... 噪音。 新默认： | Event | 默认 | -v | |------------------------|-------|------| | TextDelta | stdout| stdout | | ToolCallStarted/Result | 静默 | stderr | | TokenUsage | 静默 | stderr | | TurnComplete 摘要 | 静默* | stderr | | WorkingDirChanged | 静默 | stderr | | SubAgentProgress | 静默 | stderr | | PhaseChange | 静默 | 静默 | | ApprovalNeeded | stderr| stderr | ← 安全信号必须可见 | Error | stderr| stderr | | TurnCancelled | stderr| stderr | (*) TurnComplete 在默认模式下仍补 stdout 末尾换行，只是省略 [done] 摘要 为何 -v 是 opt-in：用户常态使用 -p 都要"干净答案"，verbose 是少数 debug 场景。把多数路径设为默认更符合最少惊讶原则。 改动： - crates/atomcode-cli/src/main.rs：Cli.verbose 字段；run_headless 增加 verbose 参数；6 处 eprintln 改 if verbose - scripts/test-headless.sh：T3 加 -v；新增 T3b 验证默认 stderr 全空 - docs/headless-pipe-plan.md：追加 §7 verbose addendum Live verify (--release，real provider)： - atomcode -p "用一句话介绍这个项目" → exit 0, stdout: 314 字节最终回复, stderr: 0 字节 ✓ - atomcode -v -p "..." → exit 0, stdout: 同上, stderr: 7 行（tool× 4 + tokens + done）✓ 回归： - cargo test -p atomcode --bin atomcode 5/5 PASS - ./scripts/test-headless.sh T5/T5b PASS, T1/T2/T3/T3b/T4 SKIP（无 provider） - cargo build 0 warning / 0 error Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com> | 6 个月前 | |
refactor: 统一 ATOMCODE_HOME 语义，废弃 ATOMCODE_HOME_OVERRIDE 此前 ATOMCODE_HOME 在工程内存在两套互不兼容的语义： - 语义 A（Config::config_dir）：直接把 ATOMCODE_HOME 当 config 根， 即 ATOMCODE_HOME=/X 等价于 ~/.atomcode/；config.toml、history、 memory.md 等都按此路径解析。 - 语义 B（skill/plugin/setup/event_loop）：把 ATOMCODE_HOME 当 $HOME 替身，再追加 .atomcode/，即 ATOMCODE_HOME=/X 解析为 /X/.atomcode/。 后果是设了 ATOMCODE_HOME=/X 的用户数据目录会被劈成两半（/X 和 /X/.atomcode 各放一部分），且 uninstall 走另一套独立的 ATOMCODE_HOME_OVERRIDE 变量，自定义过路径的用户运行 uninstall 找不到自己的数据。 本次统一到语义 A，所有目录解析都走 Config::config_dir()： - crates/atomcode-core/src/skill.rs: SkillRegistry::reload 不再 手动拼 .atomcode 子目录 - crates/atomcode-core/src/plugin/paths.rs: plugins_root() 同上 - crates/atomcode-core/src/setup/mod.rs: install_directory_skills_from_seeds 删除双分支逻辑 - crates/atomcode-tuix/src/event_loop/mod.rs: should_auto_show_setup 同上，顺手清理一处多余的重复闭合括号 - crates/atomcode-core/src/uninstall/paths.rs: atomcode_dir() 切到 Config::config_dir()，废弃独立的 ATOMCODE_HOME_OVERRIDE - scripts/uninstall.sh / uninstall.ps1: 同步从 ATOMCODE_HOME_OVERRIDE 改读 ATOMCODE_HOME 测试同步更新：uninstall_integration 把 env 从 ATOMCODE_HOME_OVERRIDE 换成 ATOMCODE_HOME 并去掉 .atomcode 子目录；skill 测试里两处期望路径 从 tmp/.atomcode/plugins 改为 tmp/plugins。 验证： - cargo check -p atomcode-core -p atomcode -p atomcode-tuix 通过 - 6 个 uninstall::paths + plugin::paths 单测通过 - 24 个 skill 单测全过 - plugin_integration 端到端测试通过（ATOMCODE_HOME=tmp 后能正确 扫到 tmp/plugins/.../skills/sk） - uninstall_integration 3 个测试通过 | 5 个月前 | |
refactor: retire atomcode-core crate Provider-URL: https://gitcode.com/atomgit_atomcode/atomcode | 2 个月前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 6 个月前 | ||
| 3 个月前 | ||
| 2 个月前 | ||
| 2 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 6 个月前 | ||
| 6 个月前 | ||
| 3 个月前 | ||
| 3 个月前 | ||
| 6 个月前 | ||
| 5 个月前 | ||
| 2 个月前 |