# Copyright (C) 2001-2024 Artifex Software, Inc.
# All Rights Reserved.
#
# This software is provided AS-IS with no warranty, either express or
# implied.
#
# This software is distributed under license and may not be copied,
# modified or distributed except as expressly authorized under the terms
# of the license contained in the file LICENSE in this distribution.
#
# Refer to licensing information at http://www.artifex.com or contact
# Artifex Software, Inc., 39 Mesa Street, Suite 108A, San Francisco,
# CA 94129, USA, for further information.
#
#
# $Id: msvc32.mak 12087 2011-02-01 11:57:26Z robin $
# makefile for 32-bit Microsoft Visual C++, Windows NT or Windows 95 platform.
#
# All configurable options are surrounded by !ifndef/!endif to allow
# preconfiguration from within another makefile.
#
# Optimization /O2 seems OK with MSVC++ 4.1, but not with 5.0.
# Created 1997-01-24 by Russell Lang from MSVC++ 2.0 makefile.
# Enhanced 97-05-15 by JD
# Common code factored out 1997-05-22 by L. Peter Deutsch.
# Made pre-configurable by JD 6/4/98
# Revised to use subdirectories 1998-11-13 by lpd.
# Note: If you are planning to make self-extracting executables,
# see winint.mak to find out about third-party software you will need.
# If we are building MEMENTO=1, then adjust default debug flags
!if "$(MEMENTO)"=="1"
!ifndef DEBUG
DEBUG=1
!endif
!ifndef TDEBUG
TDEBUG=1
!endif
!ifndef DEBUGSYM
DEBUGSYM=1
!endif
!endif
# If we are building PROFILE=1, then adjust default debug flags
!if "$(PROFILE)"=="1"
!ifndef DEBUG
DEBUG=0
!endif
!ifndef TDEBUG
TDEBUG=0
!endif
!ifndef DEBUGSYM
DEBUGSYM=1
!endif
!endif
# Pick the target architecture file
!if "$(TARGET_ARCH_FILE)"==""
!ifdef WIN64
TARGET_ARCH_FILE=$(GLSRCDIR)\..\arch\windows-x64-msvc.h
!else
!ifdef ARM
TARGET_ARCH_FILE=$(GLSRCDIR)\..\arch\windows-arm-msvc.h
!else
TARGET_ARCH_FILE=$(GLSRCDIR)\..\arch\windows-x86-msvc.h
!endif
!endif
!endif
# ------------------------------- Options ------------------------------- #
###### This section is the only part of the file you should need to edit.
# ------ Generic options ------ #
# Define the directory for the final executable, and the
# source, generated intermediate file, and object directories
# for the graphics library (GL) and the PostScript/PDF interpreter (PS).
!if "$(MEMENTO)"=="1"
DEFAULT_OBJ_DIR=.\$(PRODUCT_PREFIX)memobj
!else
!if "$(PROFILE)"=="1"
DEFAULT_OBJ_DIR=.\$(PRODUCT_PREFIX)profobj
!else
!if "$(DEBUG)"=="1"
DEFAULT_OBJ_DIR=.\$(PRODUCT_PREFIX)debugobj
!else
!if "$(SANITIZE)"=="1"
DEFAULT_OBJ_DIR=.\$(PRODUCT_PREFIX)sanobj
!else
DEFAULT_OBJ_DIR=.\$(PRODUCT_PREFIX)obj
!endif
!endif
!endif
!endif
!ifdef METRO
DEFAULT_OBJ_DIR=$(DEFAULT_OBJ_DIR)rt
!endif
!ifdef WIN64
DEFAULT_OBJ_DIR=$(DEFAULT_OBJ_DIR)64
!endif
!ifdef XP
DEFAULT_OBJ_DIR=$(DEFAULT_OBJ_DIR)xp
!endif
!ifndef AUXDIR
AUXDIR=$(DEFAULT_OBJ_DIR)\aux_
!endif
# Note that 32-bit and 64-bit binaries reside in a common directory
# since the names are unique
!ifndef BINDIR
!if "$(MEMENTO)"=="1"
BINDIR=.\membin
!else
!if "$(DEBUG)"=="1"
BINDIR=.\debugbin
!else
!if "$(SANITIZE)"=="1"
BINDIR=.\sanbin
!else
!if "$(DEBUGSYM)"=="1"
BINDIR=.\profbin
!else
BINDIR=.\bin
!endif
!endif
!endif
!endif
!ifdef XP
BINDIR=$(BINDIR)xp
!endif
!endif
!ifndef GLSRCDIR
GLSRCDIR=.\base
!endif
!ifndef GLGENDIR
GLGENDIR=$(DEFAULT_OBJ_DIR)
!endif
!ifndef DEVSRCDIR
DEVSRCDIR=.\devices
!endif
!ifndef GLOBJDIR
GLOBJDIR=$(GLGENDIR)
!endif
!ifndef DEVGENDIR
DEVGENDIR=$(GLGENDIR)
!endif
!ifndef DEVOBJDIR
DEVOBJDIR=$(GLOBJDIR)
!endif
!ifndef PSSRCDIR
PSSRCDIR=.\psi
!endif
!ifndef PSLIBDIR
PSLIBDIR=.\lib
!endif
!ifndef PSRESDIR
PSRESDIR=.\Resource
!endif
!ifndef PSGENDIR
PSGENDIR=$(GLGENDIR)
!endif
!ifndef PSOBJDIR
PSOBJDIR=$(GLOBJDIR)
!endif
!ifndef SBRDIR
SBRDIR=$(GLOBJDIR)
!endif
!ifndef EXPATGENDIR
EXPATGENDIR=$(GLGENDIR)
!endif
!ifndef EXPATOBJDIR
EXPATOBJDIR=$(GLOBJDIR)
!endif
!ifndef JPEGXR_GENDIR
JPEGXR_GENDIR=$(GLGENDIR)
!endif
!ifndef JPEGXR_OBJDIR
JPEGXR_OBJDIR=$(GLOBJDIR)
!endif
!ifndef PCL5SRCDIR
PCL5SRCDIR=.\pcl\pcl
!endif
!ifndef PCL5GENDIR
PCL5GENDIR=$(GLGENDIR)
!endif
!ifndef PCL5OBJDIR
PCL5OBJDIR=$(GLOBJDIR)
!endif
!ifndef PXLSRCDIR
PXLSRCDIR=.\pcl\pxl
!endif
!ifndef PXLGENDIR
PXLGENDIR=$(GLGENDIR)
!endif
!ifndef PXLOBJDIR
PXLOBJDIR=$(GLOBJDIR)
!endif
!ifndef PLSRCDIR
PLSRCDIR=.\pcl\pl
!endif
!ifndef PLGENDIR
PLGENDIR=$(GLGENDIR)
!endif
!ifndef PLOBJDIR
PLOBJDIR=$(GLOBJDIR)
!endif
!ifndef XPSSRCDIR
XPSSRCDIR=.\xps
!endif
!ifndef XPSGENDIR
XPSGENDIR=$(GLGENDIR)
!endif
!ifndef XPSOBJDIR
XPSOBJDIR=$(GLOBJDIR)
!endif
!ifndef PDFSRCDIR
PDFSRCDIR=.\pdf
!endif
!ifndef PDFGENDIR
PDFGENDIR=$(GLGENDIR)
!endif
!ifndef PDFOBJDIR
PDFOBJDIR=$(GLOBJDIR)
!endif
!ifndef GPDLSRCDIR
GPDLSRCDIR=.\gpdl
!endif
!ifndef GPDLGENDIR
GPDLGENDIR=$(GLGENDIR)
!endif
!ifndef GPDLOBJDIR
GPDLOBJDIR=$(GLOBJDIR)
!endif
!ifndef URFSRCDIR
URFSRCDIR=.\urf
!endif
!ifndef URFGENDIR
URFGENDIR=$(GLGENDIR)
!endif
!ifndef URFOBJDIR
URFOBJDIR=$(GLOBJDIR)
!endif
!ifndef IMGSRCDIR
IMGSRCDIR=.\gpdl\img
!endif
!ifndef IMGGENDIR
IMGGENDIR=$(GLGENDIR)
!endif
!ifndef IMGOBJDIR
IMGOBJDIR=$(GLOBJDIR)
!endif
# CAL detects the presence of SSE/AVX2 at runtime. We assume
# modern windows compilers can build for both, and they will
# just be disabled automatically if not present. If the compiler
# can't cope with this, then define CAL_CFLAGS to be empty
# in the makefile invocation.
!ifndef CAL_CFLAGS
CAL_CFLAGS=/DHAVE_SSE4_2 /DHAVE_AVX2
!endif
CONTRIBDIR=.\contrib
# Can we build PCL and XPS and PDF
!ifndef BUILD_PCL
BUILD_PCL=0
!if exist ("$(PLSRCDIR)\pl.mak")
BUILD_PCL=1
!endif
!endif
!ifndef BUILD_XPS
BUILD_XPS=0
!if exist ("$(XPSSRCDIR)\xps.mak")
BUILD_XPS=1
!endif
!endif
!ifndef BUILD_PDF
BUILD_PDF=0
GPDF_DEV=
!if exist ("$(PDFSRCDIR)\pdf.mak")
BUILD_PDF=1
GPDF_DEV=$(PDFOBJDIR)\pdfi.dev
!endif
!endif
!ifndef BUILD_GPDL
BUILD_GPDL=0
!if exist ("$(GPDLSRCDIR)\gpdl.mak")
BUILD_GPDL=1
!endif
!endif
PCL_TARGET=
XPS_TARGET=
PDF_TARGET=
!if $(BUILD_PCL)
PCL_TARGET=gpcl6
!endif
!if $(BUILD_XPS)
XPS_TARGET=gxps
!endif
!if $(BUILD_PDF)
!if exist ("$(PLSRCDIR)\pl.mak")
PDF_TARGET=gpdf
!endif
!endif
!if $(BUILD_GPDL)
GPDL_TARGET=gpdl
!endif
PCL_XPS_PDL_TARGETS=$(PCL_TARGET) $(XPS_TARGET) $(GPDL_TARGET) $(PDF_TARGET)
# Define the root directory for Ghostscript installation.
!ifndef AROOTDIR
AROOTDIR=c:/gs
!endif
!ifndef GSROOTDIR
GSROOTDIR=$(AROOTDIR)/gs$(GS_DOT_VERSION)
!endif
# Define the directory to look in for tesseract data.
!ifndef TESSDATA
TESSDATA=$(GSROOTDIR)/tessdata
!endif
# Define the directory that will hold documentation at runtime.
!ifndef GS_DOCDIR
GS_DOCDIR=$(GSROOTDIR)/doc
!endif
# Define the default directory/ies for the runtime initialization, resource and
# font files. Separate multiple directories with ';'.
# Use / to indicate directories, not \.
# MSVC will not allow \'s here because it sees '\;' CPP-style as an
# illegal escape.
!ifndef GS_LIB_DEFAULT
GS_LIB_DEFAULT=$(GSROOTDIR)/Resource/Init;$(GSROOTDIR)/lib;$(GSROOTDIR)/Resource/Font;$(AROOTDIR)/fonts
!endif
# Define whether or not searching for initialization files should always
# look in the current directory first. This leads to well-known security
# and confusion problems, but may be convenient sometimes.
!ifndef SEARCH_HERE_FIRST
SEARCH_HERE_FIRST=0
!endif
# Define the name of the interpreter initialization file.
# (There is no reason to change this.)
!ifndef GS_INIT
GS_INIT=gs_init.ps
!endif
# Choose generic configuration options.
# Setting DEBUG=1 includes debugging features in the build:
# 1. It defines the C preprocessor symbol DEBUG. The latter includes
# tracing and self-validation code fragments into compilation.
# Particularly it enables the -Z and -T switches in Ghostscript.
# 2. It compiles code fragments for C stack overflow checks.
# Code produced with this option is somewhat larger and runs
# somewhat slower.
!ifndef DEBUG
DEBUG=0
!endif
# Setting TDEBUG=1 disables code optimization in the C compiler and
# includes symbol table information for the debugger.
# Code is substantially larger and slower.
# NOTE: The MSVC++ 5.0 compiler produces incorrect output code with TDEBUG=0.
# Also MSVC 6 must be service pack >= 3 to prevent INTERNAL COMPILER ERROR
# Default to 0 anyway since the execution times are so much better.
!ifndef TDEBUG
TDEBUG=0
!endif
# Setting DEBUGSYM=1 is only useful with TDEBUG=0.
# This option is for advanced developers. It includes symbol table
# information for the debugger in an optimized (release) build.
# NOTE: The debugging information generated for the optimized code may be
# significantly misleading. For general MSVC users we recommend TDEBUG=1.
!ifndef DEBUGSYM
DEBUGSYM=0
!endif
# We can compile for a 32-bit or 64-bit target
# WIN32 and WIN64 are mutually exclusive. WIN32 is the default.
!if !defined(WIN32) && (!defined(Win64) || !defined(WIN64))
WIN32=0
!endif
!if "$(SANITIZE)"=="1" && defined(WIN64)
!error 64bit Sanitize builds not supported by MSVC yet!
!endif
# We can build either 32-bit or 64-bit target on a 64-bit platform
# but the location of the binaries differs. Would be nice if the
# detection of the platform could be automatic.
!ifndef BUILD_SYSTEM
!if "$(PROCESSOR_ARCHITEW6432)"=="AMD64" || "$(PROCESSOR_ARCHITECTURE)"=="AMD64"
BUILD_SYSTEM=64
PGMFILES=$(SYSTEMDRIVE)\Program Files
PGMFILESx86=$(SYSTEMDRIVE)\Program Files (x86)
!else
BUILD_SYSTEM=32
PGMFILES=$(SYSTEMDRIVE)\Program Files
PGMFILESx86=$(SYSTEMDRIVE)\Program Files
!endif
!endif
!ifndef MSWINSDKPATH
!if exist ("$(PGMFILESx86)\Microsoft SDKs\Windows")
!if exist ("$(PGMFILESx86)\Microsoft SDKs\Windows\v7.1A")
MSWINSDKPATH=$(PGMFILESx86)\Microsoft SDKs\Windows\v7.1A
!else
!if exist ("$(PGMFILESx86)\Microsoft SDKs\Windows\v7.1")
MSWINSDKPATH=$(PGMFILESx86)\Microsoft SDKs\Windows\v7.1
!else
!if exist ("$(PGMFILESx86)\Microsoft SDKs\Windows\v7.0A")
MSWINSDKPATH=$(PGMFILESx86)\Microsoft SDKs\Windows\v7.0A
!else
!if exist ("$(PGMFILESx86)\Microsoft SDKs\Windows\v7.0")
MSWINSDKPATH=$(PGMFILESx86)\Microsoft SDKs\Windows\v7.0
!endif
!endif
!endif
!endif
!else
!if exist ("$(PGMFILES)\Microsoft SDKs\Windows")
!if exist ("$(PGMFILES)\Microsoft SDKs\Windows\v7.1A")
MSWINSDKPATH=$(PGMFILES)\Microsoft SDKs\Windows\v7.1A
!else
!if exist ("$(PGMFILES)\Microsoft SDKs\Windows\v7.1")
MSWINSDKPATH=$(PGMFILES)\Microsoft SDKs\Windows\v7.1
!else
!if exist ("$(PGMFILES)\Microsoft SDKs\Windows\v7.0A")
MSWINSDKPATH=$(PGMFILES)\Microsoft SDKs\Windows\v7.0A
!else
!if exist ("$(PGMFILES)\Microsoft SDKs\Windows\v7.0")
MSWINSDKPATH=$(PGMFILES)\Microsoft SDKs\Windows\v7.0
!endif
!endif
!endif
!endif
!endif
!endif
!endif
XPSPRINTCFLAGS=
XPSPRINT=0
!ifdef MSWINSDKPATH
!if exist ("$(MSWINSDKPATH)\Include\XpsPrint.h")
XPSPRINTCFLAGS=/DXPSPRINT=1 /I"$(MSWINSDKPATH)\Include"
XPSPRINT=1
!endif
!endif
# Define the name of the executable file.
!ifndef GS
!ifdef WIN64
GS=gswin64
PCL=gpcl6win64
XPS=gxpswin64
GPDL=gpdlwin64
PDF=gpdfwin64
!else
!ifdef ARM
GS=gswinARM
PCL=gpcl6winARM
XPS=gxpswinARM
GPDL=gpdlwinARM
PDF=gpdfwinARM
!else
GS=gswin32
PCL=gpcl6win32
XPS=gxpswin32
GPDL=gpdlwin32
PDF=gpdfwin32
!endif
!endif
!endif
!ifndef GSCONSOLE
GSCONSOLE=$(GS)c
!endif
!ifndef GSDLL
!ifdef METRO
!ifdef WIN64
GSDLL=gsdll64metro
!else
!ifdef ARM
GSDLL=gsdllARM32metro
!else
GSDLL=gsdll32metro
!endif
!endif
!else
!ifdef WIN64
GSDLL=gsdll64
!else
GSDLL=gsdll32
!endif
!endif
!endif
!ifndef GPCL6DLL
!ifdef METRO
!ifdef WIN64
GPCL6DLL=gpcl6dll64metro
!else
!ifdef ARM
GPCL6DLL=gpcl6dllARM32metro
!else
GPCL6DLL=gpcl6dll32metro
!endif
!endif
!else
!ifdef WIN64
GPCL6DLL=gpcl6dll64
!else
GPCL6DLL=gpcl6dll32
!endif
!endif
!endif
!ifndef GXPSDLL
!ifdef METRO
!ifdef WIN64
GXPSDLL=gxpsdll64metro
!else
!ifdef ARM
GXPSDLL=gxpsdllARM32metro
!else
GXPSDLL=gxpsdll32metro
!endif
!endif
!else
!ifdef WIN64
GXPSDLL=gxpsdll64
!else
GXPSDLL=gxpsdll32
!endif
!endif
!endif
!ifndef GPDFDLL
!ifdef METRO
!ifdef WIN64
GPDFDLL=gpdfdll64metro
!else
!ifdef ARM
GPDFDLL=gpfddllARM32metro
!else
GPDFDLL=gpdfdll32metro
!endif
!endif
!else
!ifdef WIN64
GPDFDLL=gpdfdll64
!else
GPDFDLL=gpdfdll32
!endif
!endif
!endif
!ifndef GPDLDLL
!ifdef METRO
!ifdef WIN64
GPDLDLL=gpdldll64metro
!else
!ifdef ARM
GPDLDLL=gpdldllARM32metro
!else
GPDLDLL=gpdldll32metro
!endif
!endif
!else
!ifdef WIN64
GPDLDLL=gpdldll64
!else
GPDLDLL=gpdldll32
!endif
!endif
!endif
# To build two small executables and a large DLL use MAKEDLL=1
# To build two large executables use MAKEDLL=0
!ifndef MAKEDLL
!if "$(PROFILE)"=="1"
MAKEDLL=0
!else
MAKEDLL=1
!endif
!endif
# Should we build in the cups device....
!ifdef WITH_CUPS
!if "$(WITH_CUPS)"!="0"
WITH_CUPS=1
!else
WITH_CUPS=0
!endif
!else
WITH_CUPS=0
!endif
# Should we build URF...
!ifdef WITH_URF
!if "$(WITH_URF)"!="0"
WITH_URF=1
!else
WITH_URF=0
!endif
!else
!if exist ("$(URFSRCDIR)")
WITH_URF=1
!else
WITH_URF=0
!endif
!endif
!if "$(WITH_URF)"=="1"
ENABLE_URF=$(D_)URF_INCLUDED$(_D)
GPDL_URF_TOP_OBJ=$(GPDLOBJ)/$(GPDL_URF_TOP_OBJ_FILE)
URF_INCLUDE=$(I_)$(URFSRCDIR)$(_I)
URF_DEV=$(GLD)urfd.dev
SURFX_H=$(URFSRCDIR)$(D)surfx.h
!endif
# Should we build using CAL....
CALSRCDIR=cal
!ifdef WITH_CAL
!if "$(WITH_CAL)"!="0"
WITH_CAL=1
!else
WITH_CAL=0
!endif
!else
!if exist ("$(CALSRCDIR)")
WITH_CAL=1
!else
WITH_CAL=0
!endif
!endif
# Should we build using SO...
SOSRCDIR=so
!ifdef WITH_SO
!if "$(WITH_SO)"!="0"
WITH_SO=1
!else
WITH_SO=0
!endif
!else
!if exist ("$(SOSRCDIR)")
WITH_SO=1
!else
WITH_SO=0
!endif
!endif
!if "$(WITH_SO)"=="1"
ENABLE_SO=$(D_)SO_INCLUDED$(_D)
GPDL_SO_TOP_OBJ=$(GPDLOBJ)/$(GPDL_SO_TOP_OBJ_FILE)
SO_INCLUDE=$(I_)$(SOSRCDIR)$(_I)
!ifdef WIN64
SO_PDFEXPORT_LIB=$(SOSRCDIR)/lib/win/x64/smart-office-lib.lib winmm.lib
!else
SO_PDFEXPORT_LIB=$(SOSRCDIR)/lib/win/x86/smart-office-lib.lib winmm.lib
!endif
!else
SO_PDFEXPORT_LIB=
!endif
# We can't build cups libraries in a Metro friendly way,
# so if building for Metro, disable cups regardless of the
# request
!ifdef METRO
WITH_CUPS=0
!endif
# Define the directory where the FreeType2 library sources are stored.
# See freetype.mak for more information.
# Note that FT_BRIDGE=1 is now the only support configuration for anything
# other than testing purposes (even when UFST_BRIDGE=1 - we require Freetype
# for embedded/downloaded fonts.
!ifndef FT_BRIDGE
FT_BRIDGE=1
!endif
!ifndef FTSRCDIR
FTSRCDIR=freetype
!endif
!ifndef FT_CFLAGS
FT_CFLAGS=-I$(FTSRCDIR)\include
!endif
!ifdef BITSTREAM_BRIDGE
FT_BRIDGE=0
!endif
# Define the directory where the IJG JPEG library sources are stored,
# and the major version of the library that is stored there.
# You may need to change this if the IJG library version changes.
# See jpeg.mak for more information.
!ifndef JSRCDIR
JSRCDIR=jpeg
!endif
# Define the directory where the PNG library sources are stored,
# and the version of the library that is stored there.
# You may need to change this if the libpng version changes.
# See png.mak for more information.
!ifndef PNGSRCDIR
PNGSRCDIR=libpng
!endif
!ifndef TIFFSRCDIR
TIFFSRCDIR=tiff$(D)
TIFFCONFDIR=$(TIFFSRCDIR)
TIFFCONFIG_SUFFIX=.vc
TIFFPLATFORM=win32
TIFF_CFLAGS=-DJPEG_SUPPORT -DOJPEG_SUPPORT -DJPEG_LIB_MK1_OR_12BIT=0 -DTIFF_DISABLE_DEPRECATED
ENABLE_TIFF=$(D_)TIFF_INCLUDED$(_D)
!endif
# Define the directory where the zlib sources are stored.
# See zlib.mak for more information.
!ifndef ZSRCDIR
ZSRCDIR=.\zlib
!endif
!if exist("leptonica")
LEPTONICADIR=leptonica
# /wd4244 = Suppress casting warnings on initialisation
LEPTSUPPRESS=/wd4244
!endif
!if exist("tesseract")
TESSERACTDIR=tesseract
# /wd4244 = Suppress casting warnings on initialisation
# /wd4305 = Suppress double->float truncation warnings
TESSCXXFLAGS=-DHAVE_AVX -DHAVE_AVX2 -DHAVE_SSE4_1 -DHAVE_FMA -D__AVX__ -D__AVX2__ -D__FMA__ -D__SSE4_1__ /EHsc /std:c++17 /utf-8 /wd4244 /wd4305
!endif
!if defined(TESSERACTDIR) && defined(LEPTONICADIR)
OCR_VERSION=1
!else
OCR_VERSION=0
!endif
OCR_SHARED=0
!ifndef JBIG2_LIB
JBIG2_LIB=jbig2dec
!endif
# Use jbig2dec by default. See jbig2.mak for more information.
!ifndef JBIG2SRCDIR
# location of included jbig2dec library source
JBIG2SRCDIR=jbig2dec
!endif
# Alternatively, you can build a separate DLL
# and define SHARE_JBIG2=1 in src/winlib.mak
!ifndef JPX_LIB
JPX_LIB=openjpeg
!endif
# If $EXTRACT_DIR is unset, and the 'extract' directory exists,
# default it to that.
!if "$(EXTRACT_DIR)" == ""
! if exist("extract")
EXTRACT_DIR=extract
! endif
!endif
# If $EXTRACT_DIR is set, build with Extract library.
#
!if "$(EXTRACT_DIR)" != ""
! if !exist($(EXTRACT_DIR))
! error Cannot find extract directory: $(EXTRACT_DIR)
! endif
EXTRACT_DEVS=$(DD)docxwrite.dev
!endif
# Alternatively, you can build a separate DLL
# and define SHARE_JPX=1 in src/winlib.mak
# Define the directory where the lcms2mt source is stored.
# See lcms2mt.mak for more information
SHARE_LCMS=0
!ifndef LCMS2MTSRCDIR
LCMS2MTSRCDIR=lcms2mt
!endif
# Define the directory where the lcms2 source is stored.
# See lcms2.mak for more information
!ifndef LCMS2SRCDIR
LCMS2SRCDIR=lcms2
!endif
# Define the directory where the ijs source is stored,
# and the process forking method to use for the server.
# See ijs.mak for more information.
!ifndef IJSSRCDIR
SHARE_IJS=0
IJS_NAME=
IJSSRCDIR=ijs
IJSEXECTYPE=win
!endif
# Define the directory where the CUPS library sources are stored,
!ifndef LCUPSSRCDIR
SHARE_LCUPS=0
LCUPS_NAME=
LCUPSSRCDIR=cups
LCUPSBUILDTYPE=win
CUPS_CC=$(CC) $(CFLAGS) -DWIN32
!endif
!ifndef LIBCUPSSRCDIR
LIBCUPSSRCDIR=cups
!endif
!ifndef LCUPSISRCDIR
SHARE_LCUPSI=0
LCUPSI_NAME=
LCUPSISRCDIR=cups
CUPS_CC=$(CC) $(CFLAGS) -DWIN32 -DHAVE_BOOLEAN
!endif
!ifndef JPEGXR_SRCDIR
JPEGXR_SRCDIR=.\jpegxr
!endif
!ifndef SHARE_JPEGXR
SHARE_JPEGXR=0
!endif
!ifndef JPEGXR_CFLAGS
JPEGXR_CFLAGS=/TP /DNDEBUG
!endif
!ifndef EXPATSRCDIR
EXPATSRCDIR=.\expat
!endif
!ifndef SHARE_EXPAT
SHARE_EXPAT=0
!endif
!ifndef EXPAT_CFLAGS
EXPAT_CFLAGS=/DWIN32
!endif
# Define any other compilation flags.
# support XCFLAGS for parity with the unix makefiles
!ifndef XCFLAGS
XCFLAGS=
!endif
!ifndef CFLAGS
!if !defined(DEBUG) || "$(DEBUG)"=="0"
CFLAGS=/DNDEBUG
!else
CFLAGS=
!endif
!endif
!ifdef DEVSTUDIO
CFLAGS=$(CFLAGS) /FC
!endif
!ifdef XP
CFLAGS=$(CFLAGS) /D_USING_V110_SDK71_
SUBSUBSYS=,"5.01"
!endif
!ifdef CLUSTER
CFLAGS=$(CFLAGS) -DCLUSTER
!endif
!if "$(MEMENTO)"=="1"
CFLAGS=$(CFLAGS) -DMEMENTO
!endif
!ifdef METRO
# Ideally the TIF_PLATFORM_CONSOLE define should only be for libtiff,
# but we aren't set up to do that easily
CFLAGS=$(CFLAGS) -DMETRO -DWINAPI_FAMILY=WINAPI_PARTITION_APP -DTIF_PLATFORM_CONSOLE
# WinRT doesn't allow ExitProcess() so we have to suborn it here.
# it shouldn't matter since we actually rely on setjmp()/longjmp() for error handling in libtiff
PNG_CFLAGS=/DExitProcess=exit
!endif
!if $(BUILD_PDF)
CFLAGS=/DBUILD_PDF=1 /I$(PDFSRCDIR) /I$(ZSRCDIR) $(CFLAGS)
!endif
CFLAGS=$(CFLAGS) $(XCFLAGS)
# 1 --> Use 64 bits for gx_color_index. This is required only for
# non standard devices or DeviceN process color model devices.
USE_LARGE_COLOR_INDEX=0
!if $(USE_LARGE_COLOR_INDEX) == 1
# Definitions to force gx_color_index to 64 bits
LARGEST_UINTEGER_TYPE=unsigned __int64
GX_COLOR_INDEX_TYPE=$(LARGEST_UINTEGER_TYPE)
CFLAGS=$(CFLAGS) /DGX_COLOR_INDEX_TYPE="$(GX_COLOR_INDEX_TYPE)"
!endif
# -W3 generates too much noise.
!ifndef WARNOPT
WARNOPT=-W2
!endif
#
# Do not edit the next group of lines.
#!include $(COMMONDIR)\msvcdefs.mak
#!include $(COMMONDIR)\pcdefs.mak
#!include $(COMMONDIR)\generic.mak
!include $(GLSRCDIR)\version.mak
# The following is a hack to get around the special treatment of \ at
# the end of a line.
NUL=
D_=-D
DD=$(GLGENDIR)\$(NUL)
GLD=$(GLGENDIR)\$(NUL)
PSD=$(PSGENDIR)\$(NUL)
!ifdef SBR
SBRFLAGS=/FR$(SBRDIR)\$(NUL)
!endif
# ------ Platform-specific options ------ #
!include $(GLSRCDIR)\msvcver.mak
# ------ Devices and features ------ #
# Choose the language feature(s) to include. See gs.mak for details.
!ifndef FEATURE_DEVS
# Choose the language feature(s) to include. See gs.mak for details.
# if it's included, $(PSD)gs_pdfwr.dev should always be one of the last in the list
PSI_FEATURE_DEVS=$(PSD)psl3.dev $(PSD)pdf.dev $(GPDF_DEV) $(PSD)epsf.dev $(PSD)ttfont.dev \
$(PSD)jbig2.dev $(PSD)jpx.dev $(PSD)fapi_ps.dev $(GLD)winutf8.dev $(PSD)gs_pdfwr.dev
PCL_FEATURE_DEVS=$(PLOBJDIR)/pl.dev $(PLOBJDIR)/pjl.dev $(PXLOBJDIR)/pxl.dev $(PCL5OBJDIR)/pcl5c.dev \
$(PCL5OBJDIR)/hpgl2c.dev
XPS_FEATURE_DEVS=$(XPSOBJDIR)/pl.dev $(XPSOBJDIR)/xps.dev
PDF_FEATURE_DEVS=$(PDFOBJDIR)/pl.dev $(PDFOBJDIR)/gpdf.dev
FEATURE_DEVS=$(GLD)pipe.dev $(GLD)gsnogc.dev $(GLD)htxlib.dev $(GLD)psl3lib.dev $(GLD)psl2lib.dev \
$(GLD)dps2lib.dev $(GLD)path1lib.dev $(GLD)patlib.dev $(GLD)psl2cs.dev $(GLD)rld.dev $(GLD)gxfapiu$(UFST_BRIDGE).dev\
$(GLD)ttflib.dev $(GLD)cielib.dev $(GLD)sdct.dev $(GLD)libpng.dev\
$(GLD)seprlib.dev $(GLD)translib.dev $(GLD)cidlib.dev $(GLD)psf0lib.dev $(GLD)psf1lib.dev\
$(GLD)psf2lib.dev $(GLD)lzwd.dev $(GLD)sicclib.dev $(GLD)mshandle.dev $(GLD)mspoll.dev \
$(GLD)ramfs.dev $(GLD)sjpx.dev $(GLD)sjbig2.dev \
$(GLD)pwgd.dev $(GLD)siscale.dev $(URF_DEV)
!ifndef METRO
FEATURE_DEVS=$(FEATURE_DEVS) $(PSD)msprinter.dev $(GLD)pipe.dev
!endif
!endif
# Choose whether to compile the .ps initialization files into the executable.
# See gs.mak for details.
!ifndef COMPILE_INITS
COMPILE_INITS=1
!endif
# Choose whether to store band lists on files or in memory.
# The choices are 'file' or 'memory'.
!ifndef BAND_LIST_STORAGE
BAND_LIST_STORAGE=file
!endif
# Choose which compression method to use when storing band lists in memory.
# The choices are 'lzw' or 'zlib'.
!ifndef BAND_LIST_COMPRESSOR
BAND_LIST_COMPRESSOR=zlib
!endif
# Choose the implementation of file I/O: 'stdio', 'fd', or 'both'.
# See gs.mak and sfxfd.c for more details.
!ifndef FILE_IMPLEMENTATION
FILE_IMPLEMENTATION=stdio
!endif
# Choose the device(s) to include. See devs.mak for details,
# devs.mak and contrib.mak for the list of available devices.
!ifndef DEVICE_DEVS
!ifdef METRO
DEVICE_DEVS=
!else
DEVICE_DEVS=$(DD)display.dev $(DD)mswinpr2.dev $(DD)ijs.dev
!endif
DEVICE_DEVS2=$(DD)epson.dev $(DD)eps9high.dev $(DD)eps9mid.dev $(DD)epsonc.dev $(DD)ibmpro.dev
DEVICE_DEVS3=$(DD)deskjet.dev $(DD)djet500.dev $(DD)laserjet.dev $(DD)ljetplus.dev $(DD)ljet2p.dev $(DD)fs600.dev
DEVICE_DEVS4=$(DD)cdeskjet.dev $(DD)cdjcolor.dev $(DD)cdjmono.dev $(DD)cdj500.dev $(DD)cdj550.dev $(DD)lj4dith.dev $(DD)lj4dithp.dev $(DD)lj5gray.dev $(DD)dj505j.dev $(DD)picty180.dev
DEVICE_DEVS5=$(DD)uniprint.dev $(DD)djet500c.dev $(DD)dnj650c.dev $(DD)cljet5.dev $(DD)cljet5pr.dev $(DD)cljet5c.dev $(DD)declj250.dev $(DD)lj250.dev
DEVICE_DEVS6=$(DD)st800.dev $(DD)stcolor.dev $(DD)bj10e.dev $(DD)bj200.dev
DEVICE_DEVS7=$(DD)t4693d2.dev $(DD)t4693d4.dev $(DD)t4693d8.dev $(DD)tek4696.dev
DEVICE_DEVS8=$(DD)pcxmono.dev $(DD)pcxgray.dev $(DD)pcx16.dev $(DD)pcx256.dev $(DD)pcx24b.dev $(DD)pcxcmyk.dev
DEVICE_DEVS9=$(DD)pbm.dev $(DD)pbmraw.dev $(DD)pgm.dev $(DD)pgmraw.dev $(DD)pgnm.dev $(DD)pgnmraw.dev $(DD)pkmraw.dev
DEVICE_DEVS10=$(DD)tiffcrle.dev $(DD)tiffg3.dev $(DD)tiffg32d.dev $(DD)tiffg4.dev $(DD)tifflzw.dev $(DD)tiffpack.dev
DEVICE_DEVS11=$(DD)bmpmono.dev $(DD)bmpgray.dev $(DD)bmp16.dev $(DD)bmp256.dev $(DD)bmp16m.dev $(DD)tiff12nc.dev $(DD)tiff24nc.dev $(DD)tiff48nc.dev $(DD)tiffgray.dev $(DD)tiff32nc.dev $(DD)tiff64nc.dev $(DD)tiffsep.dev $(DD)tiffsep1.dev $(DD)tiffscaled.dev $(DD)tiffscaled8.dev $(DD)tiffscaled24.dev $(DD)tiffscaled32.dev $(DD)tiffscaled4.dev
DEVICE_DEVS12=$(DD)bit.dev $(DD)bitrgb.dev $(DD)bitcmyk.dev $(DD)bitrgbtags.dev $(DD)chameleon.dev
DEVICE_DEVS13=$(DD)pngmono.dev $(DD)pngmonod.dev $(DD)pnggray.dev $(DD)png16.dev $(DD)png256.dev $(DD)png48.dev $(DD)png16m.dev $(DD)pngalpha.dev $(DD)png16malpha.dev $(DD)fpng.dev $(DD)pppm.dev $(DD)psdcmykog.dev
DEVICE_DEVS14=$(DD)jpeg.dev $(DD)jpeggray.dev $(DD)jpegcmyk.dev $(DD)pdfimage8.dev $(DD)pdfimage24.dev $(DD)pdfimage32.dev $(DD)PCLm.dev $(DD)PCLm8.dev $(DD)imagen.dev
DEVICE_DEVS15=$(DD)pdfwrite.dev $(DD)ps2write.dev $(DD)eps2write.dev $(DD)txtwrite.dev $(DD)pxlmono.dev $(DD)pxlcolor.dev $(DD)xpswrite.dev $(DD)inkcov.dev $(DD)ink_cov.dev $(EXTRACT_DEVS)
DEVICE_DEVS16=$(DD)bbox.dev $(DD)plib.dev $(DD)plibg.dev $(DD)plibm.dev $(DD)plibc.dev $(DD)plibk.dev $(DD)plan.dev $(DD)plang.dev $(DD)planm.dev $(DD)planc.dev $(DD)plank.dev $(DD)planr.dev
!if "$(WITH_CUPS)" == "1"
DEVICE_DEVS16=$(DEVICE_DEVS16) $(DD)cups.dev
!endif
DEVICE_DEVS16=$(DEVICE_DEVS16) $(DD)urfgray.dev $(DD)urfrgb.dev $(DD)urfcmyk.dev
!if "$(OCR_VERSION)" == "0"
!else
DEVICE_DEVS16=$(DEVICE_DEVS16) $(DD)ocr.dev $(DD)hocr.dev $(DD)pdfocr8.dev $(DD)pdfocr24.dev $(DD)pdfocr32.dev
!endif
# Overflow for DEVS3,4,5,6,9
DEVICE_DEVS17=$(DD)ljet3.dev $(DD)ljet3d.dev $(DD)ljet4pjl.dev $(DD)ljet4.dev $(DD)ljet4d.dev $(DD)lp2563.dev $(DD)paintjet.dev $(DD)pjetxl.dev $(DD)lj3100sw.dev $(DD)oce9050.dev $(DD)r4081.dev $(DD)sj48.dev
DEVICE_DEVS18=$(DD)pj.dev $(DD)pjxl.dev $(DD)pjxl300.dev $(DD)jetp3852.dev $(DD)r4081.dev
DEVICE_DEVS19=$(DD)lbp8.dev $(DD)m8510.dev $(DD)necp6.dev $(DD)bjc600.dev $(DD)bjc800.dev
DEVICE_DEVS20=$(DD)pnm.dev $(DD)pnmraw.dev $(DD)ppm.dev $(DD)ppmraw.dev $(DD)pamcmyk32.dev $(DD)pamcmyk4.dev $(DD)pnmcmyk.dev $(DD)pam.dev
DEVICE_DEVS21=$(DD)spotcmyk.dev $(DD)devicen.dev $(DD)bmpsep1.dev $(DD)bmpsep8.dev $(DD)bmp16m.dev $(DD)bmp32b.dev $(DD)psdcmyk.dev $(DD)psdrgb.dev $(DD)psdcmyk16.dev $(DD)psdrgb16.dev $(DD)psdrgbtags.dev $(DD)psdcmyktags.dev $(DD)psdcmyktags16.dev
!endif
CONTRIB_DEVS=$(DD)pcl3.dev $(DD)hpdjplus.dev $(DD)hpdjportable.dev $(DD)hpdj310.dev $(DD)hpdj320.dev $(DD)hpdj340.dev $(DD)hpdj400.dev $(DD)hpdj500.dev $(DD)hpdj500c.dev $(DD)hpdj510.dev $(DD)hpdj520.dev $(DD)hpdj540.dev $(DD)hpdj550c.dev $(DD)hpdj560c.dev $(DD)hpdj600.dev $(DD)hpdj660c.dev $(DD)hpdj670c.dev $(DD)hpdj680c.dev $(DD)hpdj690c.dev $(DD)hpdj850c.dev $(DD)hpdj855c.dev $(DD)hpdj870c.dev $(DD)hpdj890c.dev $(DD)hpdj1120c.dev $(DD)cdj670.dev $(DD)cdj850.dev $(DD)cdj880.dev $(DD)cdj890.dev $(DD)cdj970.dev $(DD)cdj1600.dev $(DD)cdnj500.dev $(DD)chp2200.dev $(DD)lips3.dev $(DD)lxm5700m.dev $(DD)lxm3200.dev $(DD)lex2050.dev $(DD)lxm3200.dev $(DD)lex5700.dev $(DD)lex7000.dev $(DD)okiibm.dev $(DD)oki182.dev $(DD)oki4w.dev $(DD)gdi.dev $(DD)samsunggdi.dev $(DD)dl2100.dev $(DD)la50.dev $(DD)la70.dev $(DD)la75.dev $(DD)la75plus.dev $(DD)ln03.dev $(DD)xes.dev $(DD)md2k.dev $(DD)md5k.dev $(DD)lips4.dev $(DD)lips4v.dev $(DD)bj10v.dev $(DD)bj10vh.dev $(DD)md50Mono.dev $(DD)md50Eco.dev $(DD)md1xMono.dev $(DD)lp2000.dev $(DD)escpage.dev $(DD)ap3250.dev $(DD)npdl.dev $(DD)rpdl.dev $(DD)fmpr.dev $(DD)fmlbp.dev $(DD)ml600.dev $(DD)jj100.dev $(DD)lbp310.dev $(DD)lbp320.dev $(DD)mj700v2c.dev $(DD)mj500c.dev $(DD)mj6000c.dev $(DD)mj8000c.dev $(DD)pr201.dev $(DD)pr150.dev $(DD)pr1000.dev $(DD)pr1000_4.dev $(DD)lips2p.dev $(DD)bjc880j.dev $(DD)bjcmono.dev $(DD)bjcgray.dev $(DD)bjccmyk.dev $(DD)bjccolor.dev $(DD)escp.dev $(DD)lp8000.dev $(DD)lq850.dev $(DD)photoex.dev $(DD)st800.dev $(DD)stcolor.dev $(DD)alc1900.dev $(DD)alc2000.dev $(DD)alc4000.dev $(DD)alc4100.dev $(DD)alc8500.dev $(DD)alc8600.dev $(DD)alc9100.dev $(DD)lp3000c.dev $(DD)lp8000c.dev $(DD)lp8200c.dev $(DD)lp8300c.dev $(DD)lp8500c.dev $(DD)lp8800c.dev $(DD)lp9000c.dev $(DD)lp9200c.dev $(DD)lp9500c.dev $(DD)lp9800c.dev $(DD)lps6500.dev $(DD)epl2050.dev $(DD)epl2050p.dev $(DD)epl2120.dev $(DD)epl2500.dev $(DD)epl2750.dev $(DD)epl5800.dev $(DD)epl5900.dev $(DD)epl6100.dev $(DD)epl6200.dev $(DD)lp1800.dev $(DD)lp1900.dev $(DD)lp2200.dev $(DD)lp2400.dev $(DD)lp2500.dev $(DD)lp7500.dev $(DD)lp7700.dev $(DD)lp7900.dev $(DD)lp8100.dev $(DD)lp8300f.dev $(DD)lp8400f.dev $(DD)lp8600.dev $(DD)lp8600f.dev $(DD)lp8700.dev $(DD)lp8900.dev $(DD)lp9000b.dev $(DD)lp9100.dev $(DD)lp9200b.dev $(DD)lp9300.dev $(DD)lp9400.dev $(DD)lp9600.dev $(DD)lp9600s.dev $(DD)lps4500.dev $(DD)eplcolor.dev $(DD)eplmono.dev $(DD)hl7x0.dev $(DD)hl1240.dev $(DD)hl1250.dev $(DD)appledmp.dev $(DD)iwhi.dev $(DD)iwlo.dev $(DD)iwlq.dev $(DD)atx23.dev $(DD)atx24.dev $(DD)atx38.dev $(DD)itk24i.dev $(DD)itk38.dev $(DD)coslw2p.dev $(DD)coslwxl.dev $(DD)ccr.dev $(DD)cif.dev $(DD)inferno.dev $(DD)mgr4.dev $(DD)mgr8.dev $(DD)mgrgray2.dev $(DD)mgrgray4.dev $(DD)mgrgray8.dev $(DD)mgrmono.dev $(DD)miff24.dev $(DD)plan9bm.dev $(DD)xcf.dev
!if "$(WITH_CONTRIB)" == "1"
DEVICE_DEVS16=$(DEVICE_DEVS16) $(CONTRIB_DEVS)
!endif
# FAPI compilation options :
UFST_CFLAGS=-DMSVC
BITSTREAM_CFLAGS=
# ---------------------------- End of options ---------------------------- #
# Define the name of the makefile -- used in dependencies.
MAKEFILE=$(PSSRCDIR)\msvc.mak
TOP_MAKEFILES=$(MAKEFILE) $(GLSRCDIR)\msvccmd.mak $(GLSRCDIR)\msvctail.mak $(GLSRCDIR)\winlib.mak $(PSSRCDIR)\winint.mak
# Define the files to be removed by `make clean'.
# nmake expands macros when encountered, not when used,
# so this must precede the !include statements.
BEGINFILES2=$(GLGENDIR)\lib.rsp\
$(GLOBJDIR)\*.exp $(GLOBJDIR)\*.ilk $(GLOBJDIR)\*.pdb $(GLOBJDIR)\*.lib\
$(BINDIR)\*.exp $(BINDIR)\*.ilk $(BINDIR)\*.pdb $(BINDIR)\*.lib obj.pdb\
obj.idb $(GLOBJDIR)\gs.pch $(SBRDIR)\*.sbr $(GLOBJDIR)\cups\*.h
!ifdef BSCFILE
BEGINFILES2=$(BEGINFILES2) $(BSCFILE)
!endif
!include $(GLSRCDIR)\msvccmd.mak
# *romfs.mak must precede lib.mak
!include $(PSSRCDIR)\psromfs.mak
!if $(BUILD_PCL)
!include $(PLSRCDIR)\plromfs.mak
!endif
!if $(BUILD_XPS)
!include $(XPSSRCDIR)\xpsromfs.mak
!endif
!if $(BUILD_PDF)
!include $(PDFSRCDIR)\pdfromfs.mak
!endif
!include $(GLSRCDIR)\winlib.mak
!if $(BUILD_PCL)
!include $(PLSRCDIR)\pl.mak
!include $(PCL5SRCDIR)\pcl.mak
!include $(PCL5SRCDIR)\pcl_top.mak
!include $(PXLSRCDIR)\pxl.mak
!endif
!if $(BUILD_XPS)
!include $(XPSSRCDIR)\xps.mak
!endif
!if $(BUILD_PDF)
!include $(PDFSRCDIR)\pdf.mak
!endif
!if $(BUILD_GPDL)
!include $(GPDLSRCDIR)\gpdl.mak
!endif
!include $(GLSRCDIR)\msvctail.mak
!include $(PSSRCDIR)\winint.mak
# ----------------------------- Main program ------------------------------ #
GSCONSOLE_XE=$(BINDIR)\$(GSCONSOLE).exe
GSDLL_DLL=$(BINDIR)\$(GSDLL).dll
GSDLL_OBJS=$(PSOBJ)gsdll.$(OBJ) $(GLOBJ)gp_msdll.$(OBJ)
GPCL6DLL_DLL=$(BINDIR)\$(GPCL6DLL).dll
GXPSDLL_DLL=$(BINDIR)\$(GXPSDLL).dll
GPDFDLL_DLL=$(BINDIR)\$(GPDFDLL).dll
GPDLDLL_DLL=$(BINDIR)\$(GPDLDLL).dll
INT_ARCHIVE_SOME=$(GLOBJ)gconfig.$(OBJ) $(GLOBJ)gscdefs.$(OBJ)
INT_ARCHIVE_ALL=$(PSOBJ)imainarg.$(OBJ) $(PSOBJ)imain.$(OBJ) $(GLOBJ)iconfig.$(OBJ) \
$(INT_ARCHIVE_SOME)
!if $(TDEBUG) != 0
WIN_LIBS=
!ifdef METRO
WIN_LIBS=$(WIN_LIBS) kernel32.lib runtimeobject.lib rpcrt4.lib
!endif
!else
WIN_LIBS=
!ifdef METRO
WIN_LIBS=$(WIN_LIBS) kernel32.lib runtimeobject.lib rpcrt4.lib
!endif
!endif
$(PSGEN)lib.rsp: $(TOP_MAKEFILES)
echo "$(WIN_LIBS)" > $(PSGEN)lib.rsp
$(PCLGEN)pcllib.rsp: $(TOP_MAKEFILES)
echo "$(WIN_LIBS)" > $(PCLGEN)pcllib.rsp
$(XPSGEN)xpslib.rsp: $(TOP_MAKEFILES)
echo "$(WIN_LIBS)" > $(XPSGEN)xpslib.rsp
$(PDFGEN)pdflib.rsp: $(TOP_MAKEFILES)
echo "$(WIN_LIBS)" > $(PDFGEN)pdflib.rsp
$(GPDLGEN)gpdllib.rsp: $(TOP_MAKEFILES)
echo "$(WIN_LIBS)" > $(GPDLGEN)gpdllib.rsp
!if $(MAKEDLL)
# The graphical small EXE loader
!ifdef METRO
# For METRO build only the dll
$(GS_XE): $(GSDLL_DLL)
!else
$(GS_XE): $(GSDLL_DLL) $(DWOBJ) $(GSCONSOLE_XE) $(GLOBJ)gp_utf8.$(OBJ) $(TOP_MAKEFILES)
echo /SUBSYSTEM:WINDOWS$(SUBSUBSYS) > $(PSGEN)gswin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(PSGEN)gswin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(PSGEN)gswin.rsp
!endif
!ifdef WIN64
echo /DEF:$(PSSRCDIR)\dwmain64.def /OUT:$(GS_XE) >> $(PSGEN)gswin.rsp
!else
echo /DEF:$(PSSRCDIR)\dwmain32.def /OUT:$(GS_XE) >> $(PSGEN)gswin.rsp
!endif
$(LINK) $(LCT) @$(PSGEN)gswin.rsp $(DWOBJ) $(LINKLIBPATH) @$(LIBCTR) $(GS_OBJ).res $(GLOBJ)gp_utf8.$(OBJ)
del $(PSGEN)gswin.rsp
!endif
# The console mode small EXE loader
$(GSCONSOLE_XE): $(OBJC) $(GS_OBJ).res $(PSSRCDIR)\dw64c.def $(PSSRCDIR)\dw32c.def $(GLOBJ)gp_utf8.$(OBJ) $(TOP_MAKEFILES)
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(PSGEN)gswin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(PSGEN)gswin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(PSGEN)gswin.rsp
!endif
!ifdef WIN64
echo /DEF:$(PSSRCDIR)\dw64c.def /OUT:$(GSCONSOLE_XE) >> $(PSGEN)gswin.rsp
!else
echo /DEF:$(PSSRCDIR)\dw32c.def /OUT:$(GSCONSOLE_XE) >> $(PSGEN)gswin.rsp
!endif
$(LINK) $(LCT) @$(PSGEN)gswin.rsp $(OBJC) $(LINKLIBPATH) @$(LIBCTR) $(GS_OBJ).res $(GLOBJ)gp_utf8.$(OBJ)
# The big DLL
$(GSDLL_DLL): $(ECHOGS_XE) $(gs_tr) $(GS_ALL) $(DEVS_ALL) $(GSDLL_OBJS) $(GSDLL_OBJ).res $(PSGEN)lib.rsp \
$(PSOBJ)gsromfs$(COMPILE_INITS).$(OBJ) $(TOP_MAKEFILES)
echo Linking $(GSDLL) $(GSDLL_DLL) $(METRO)
echo /DLL /DEF:$(PSSRCDIR)\$(GSDLL).def /OUT:$(GSDLL_DLL) > $(PSGEN)gswin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan_dll_thunk-i386.lib >> $(PSGEN)gswin.rsp
!endif
$(LINK) $(LCT) @$(PSGEN)gswin.rsp $(GSDLL_OBJS) @$(gsld_tr) $(PSOBJ)gsromfs$(COMPILE_INITS).$(OBJ) @$(PSGEN)lib.rsp $(LINKLIBPATH) @$(LIBCTR) $(GSDLL_OBJ).res
del $(PSGEN)gswin.rsp
$(GPCL6DLL_DLL): $(ECHOGS_XE) $(GSDLL_OBJ).res $(LIBCTR) $(LIB_ALL) $(PCL_DEVS_ALL) $(PCLGEN)pcllib.rsp \
$(PCLOBJ)pclromfs$(COMPILE_INITS).$(OBJ) $(ld_tr) $(pcl_tr) $(MAIN_OBJ) $(TOP_OBJ) \
$(XOBJS) $(INT_ARCHIVE_SOME) $(TOP_MAKEFILES)
echo Linking $(GPCL6DLL) $(GPCL6DLL_DLL) $(METRO)
copy $(pclld_tr) $(PCLGEN)gpclwin.tr
echo $(MAIN_OBJ) $(TOP_OBJ) $(INT_ARCHIVE_SOME) $(XOBJS) >> $(PCLGEN)gpclwin.tr
echo $(PCLOBJ)pclromfs$(COMPILE_INITS).$(OBJ) >> $(PCLGEN)gpclwin.tr
echo /DLL /DEF:$(PLSRCDIR)\$(GPCL6DLL).def /OUT:$(GPCL6DLL_DLL) > $(PCLGEN)gpclwin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gpclwin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan_dll_thunk-i386.lib >> $(PSGEN)gpclwin.rsp
!endif
$(LINK) $(LCT) @$(PCLGEN)gpclwin.rsp $(GPCL6DLL_OBJS) @$(PCLGEN)gpclwin.tr @$(PSGEN)pcllib.rsp $(LINKLIBPATH) @$(LIBCTR) $(GSDLL_OBJ).res
del $(PCLGEN)gpclwin.rsp
$(GPCL_XE): $(GPCL6DLL_DLL) $(DWMAINOBJS) $(GS_OBJ).res $(TOP_MAKEFILES)
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(PCLGEN)gpclwin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PCLGEN)gpclwin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(PCLGEN)gpclwin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(PCLGEN)gpclwin.rsp
!endif
!ifdef WIN64
echo /OUT:$(GPCL_XE) >> $(PCLGEN)gpclwin.rsp
!else
echo /OUT:$(GPCL_XE) >> $(PCLGEN)gpclwin.rsp
!endif
$(LINK) $(LCT) @$(PCLGEN)gpclwin.rsp $(DWMAINOBJS) $(BINDIR)\$(GPCL6DLL).lib $(LINKLIBPATH) @$(LIBCTR) $(GS_OBJ).res
del $(PXLGEN)gpclwin.rsp
$(GXPSDLL_DLL): $(ECHOGS_XE) $(GSDLL_OBJ).res $(LIBCTR) $(LIB_ALL) $(XPS_DEVS_ALL) $(XPSGEN)xpslib.rsp \
$(XPSOBJ)xpsromfs$(COMPILE_INITS).$(OBJ) $(ld_tr) $(xps_tr) $(MAIN_OBJ) $(XPS_TOP_OBJS) \
$(XOBJS) $(INT_ARCHIVE_SOME) $(TOP_MAKEFILES)
echo Linking $(GXPSDLL) $(GXPSDLL_DLL) $(METRO)
copy $(xpsld_tr) $(XPSGEN)gxpswin.tr
echo $(MAIN_OBJ) $(XPS_TOP_OBJS) $(INT_ARCHIVE_SOME) $(XOBJS) >> $(XPSGEN)gxpswin.tr
echo $(PCLOBJ)xpsromfs$(COMPILE_INITS).$(OBJ) >> $(XPSGEN)gxpswin.tr
echo /DLL /DEF:$(PLSRCDIR)\$(GXPSDLL).def /OUT:$(GXPSDLL_DLL) > $(XPSGEN)gxpswin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(XPSGEN)gxpswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan_dll_thunk-i386.lib >> $(PSGEN)gxpswin.rsp
!endif
$(LINK) $(LCT) @$(XPSGEN)gxpswin.rsp $(GXPSDLL_OBJS) @$(XPSGEN)gxpswin.tr @$(XPSGEN)xpslib.rsp $(LINKLIBPATH) @$(LIBCTR) $(GSDLL_OBJ).res
del $(PCLGEN)gxpswin.rsp
$(GXPS_XE): $(GXPSDLL_DLL) $(DWMAINOBJS) $(GS_OBJ).res $(TOP_MAKEFILES)
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(XPSGEN)gxpswin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(XPSGEN)gxpswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(XPSGEN)gxpswin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(XPSGEN)gxpswin.rsp
!endif
!ifdef WIN64
echo /OUT:$(GXPS_XE) >> $(XPSGEN)gxpswin.rsp
!else
echo /OUT:$(GXPS_XE) >> $(XPSGEN)gxpswin.rsp
!endif
$(LINK) $(LCT) @$(XPSGEN)gxpswin.rsp $(DWMAINOBJS) $(BINDIR)\$(GXPSDLL).lib $(LINKLIBPATH) @$(LIBCTR) $(GS_OBJ).res
del $(XPSGEN)gxpswin.rsp
$(GPDFDLL_DLL): $(ECHOGS_XE) $(GSDLL_OBJ).res $(LIBCTR) $(LIB_ALL) $(PDF_DEVS_ALL) $(PDFGEN)pdflib.rsp \
$(PDFOBJ)pdfromfs$(COMPILE_INITS).$(OBJ) $(ld_tr) $(pdf_tr) $(MAIN_OBJ) $(PDF_TOP_OBJS) \
$(XOBJS) $(INT_ARCHIVE_SOME) $(TOP_MAKEFILES)
echo Linking $(GPDFDLL) $(GPDFDLL_DLL) $(METRO)
copy $(pdfld_tr) $(PDFGEN)gpdfwin.tr
echo $(MAIN_OBJ) $(PDF_TOP_OBJS) $(INT_ARCHIVE_SOME) $(XOBJS) >> $(PDFGEN)gpdfwin.tr
echo $(PCLOBJ)pdfromfs$(COMPILE_INITS).$(OBJ) >> $(PDFGEN)gpdfwin.tr
echo /DLL /DEF:$(PLSRCDIR)\$(GPDFDLL).def /OUT:$(GPDFDLL_DLL) > $(PDFGEN)gpdfwin.rsp
!if "$(PROFILE)"=="1"
echo /PROFILE >> $(PDFGEN)gpdfwin.rsp
!endif
$(LINK) $(LCT) @$(PDFGEN)gpdfwin.rsp $(GPDFDLL_OBJS) @$(PDFGEN)gpdfwin.tr @$(PDFGEN)pdflib.rsp $(LINKLIBPATH) @$(LIBCTR) $(GSDLL_OBJ).res
del $(PCLGEN)gpdfwin.rsp
$(GPDF_XE): $(GPDFDLL_DLL) $(DWMAINOBJS) $(GS_OBJ).res $(TOP_MAKEFILES)
echo /SUBSYSTEM:CONSOLE > $(PDFGEN)gpdfwin.rsp
!if "$(PROFILE)"=="1"
echo /PROFILE >> $(PDFGEN)gpdfwin.rsp
!endif
!ifdef WIN64
echo /OUT:$(GPDF_XE) >> $(PDFGEN)gpdfwin.rsp
!else
echo /OUT:$(GPDF_XE) >> $(PDFGEN)gpdfwin.rsp
!endif
$(LINK) $(LCT) @$(PDFGEN)gpdfwin.rsp $(DWMAINOBJS) $(BINDIR)\$(GPDFDLL).lib $(LINKLIBPATH) @$(LIBCTR) $(GS_OBJ).res
del $(PDFGEN)gpdfwin.rsp
$(GPDLDLL_DLL): $(ECHOGS_XE) $(GSDLL_OBJ).res $(LIBCTR) $(LIB_ALL) $(PCL_DEVS_ALL) $(XPS_DEVS_ALL) $(PDF_DEVS_ALL) \
$(GS_ALL) \
$(GPDLGEN)gpdllib.rsp \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS).$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c0.$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c1.$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c2.$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c3.$(OBJ) \
$(ld_tr) $(gpdl_tr) $(MAIN_OBJ) $(XPS_TOP_OBJS) \
$(GPDL_PSI_TOP_OBJS) $(PCL_PXL_TOP_OBJS) $(PSI_TOP_OBJ) $(XPS_TOP_OBJ) $(PDF_TOP_OBJ) \
$(REALMAIN_OBJ) $(MAIN_OBJ) $(XOBJS) $(INT_ARCHIVE_SOME) $(TOP_MAKEFILES)
echo Linking $(GPDLDLL) $(GPDLDLL_DLL) $(METRO)
copy $(gpdlld_tr) $(GPDLGEN)gpdlwin.tr
echo $(MAIN_OBJ) $(GPDL_PSI_TOP_OBJS) $(PCL_PXL_TOP_OBJS) $(PSI_TOP_OBJ) $(XPS_TOP_OBJ) $(PDF_TOP_OBJ) $(XOBJS) >> $(GPDLGEN)gpdlwin.tr
!if "$(SO_PDFEXPORT_LIB)"!=""
echo $(SO_PDFEXPORT_LIB) >> $(GPDLGEN)gpdlwin.tr
!endif
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS).$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c0.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c1.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c2.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c3.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo /DLL /DEF:$(PLSRCDIR)\$(GPDLDLL).def /OUT:$(GPDLDLL_DLL) > $(GPDLGEN)gpdlwin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(GPDLGEN)gpdlwin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan_dll_thunk-i386.lib >> $(PSGEN)gpdlwin.rsp
!endif
$(LINK) $(LCT) @$(GPDLGEN)gpdlwin.rsp $(GPDLDLL_OBJS) @$(GPDLGEN)gpdlwin.tr @$(GPDLGEN)gpdllib.rsp $(LINKLIBPATH) @$(LIBCTR) $(GSDLL_OBJ).res
del $(GPDLGEN)gpdlwin.rsp
$(GPDL_XE): $(GPDLDLL_DLL) $(DWMAINOBJS) $(GS_OBJ).res $(TOP_MAKEFILES)
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(GPDLGEN)gpdlwin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(GPDLGEN)gpdlwin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(GPDLGEN)gpdlwin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(GPDLGEN)gpdlwin.rsp
!endif
echo /OUT:$(GPDL_XE) >> $(GPDLGEN)gpdlwin.rsp
$(LINK) $(LCT) @$(GPDLGEN)gpdlwin.rsp $(DWMAINOBJS) $(BINDIR)\$(GPDLDLL).lib $(SO_PDFEXPORT_LIB) $(LINKLIBPATH) @$(LIBCTR) $(GS_OBJ).res
del $(GPDLGEN)gpdlwin.rsp
!else
# The big graphical EXE
$(GS_XE): $(GSCONSOLE_XE) $(GS_ALL) $(DEVS_ALL) $(GSDLL_OBJS) $(DWOBJNO) $(GSDLL_OBJ).res $(PSSRCDIR)\dwmain32.def\
$(ld_tr) $(gs_tr) $(PSSRCDIR)\dwmain64.def $(PSGEN)lib.rsp $(PSOBJ)gsromfs$(COMPILE_INITS).$(OBJ) \
$(TOP_MAKEFILES)
copy $(gsld_tr) $(PSGEN)gswin.tr
echo $(PSOBJ)gsromfs$(COMPILE_INITS).$(OBJ) >> $(PSGEN)gswin.tr
echo $(PSOBJ)dwnodll.obj >> $(PSGEN)gswin.tr
echo $(GLOBJ)dwimg.obj >> $(PSGEN)gswin.tr
echo $(PSOBJ)dwmain.obj >> $(PSGEN)gswin.tr
echo $(GLOBJ)dwtext.obj >> $(PSGEN)gswin.tr
echo $(GLOBJ)dwreg.obj >> $(PSGEN)gswin.tr
!ifdef WIN64
echo /DEF:$(PSSRCDIR)\dwmain64.def /OUT:$(GS_XE) > $(PSGEN)gswin.rsp
!else
echo /DEF:$(PSSRCDIR)\dwmain32.def /OUT:$(GS_XE) > $(PSGEN)gswin.rsp
!endif
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(PSGEN)gswin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(PSGEN)gswin.rsp
!endif
$(LINK) $(LCT) @$(PSGEN)gswin.rsp $(GLOBJ)gsdll @$(PSGEN)gswin.tr $(LINKLIBPATH) @$(LIBCTR) @$(PSGEN)lib.rsp $(GSDLL_OBJ).res $(DWTRACE)
del $(PSGEN)gswin.tr
del $(PSGEN)gswin.rsp
# The big console mode EXE
$(GSCONSOLE_XE): $(ECHOGS_XE) $(gs_tr) $(GS_ALL) $(DEVS_ALL) $(GSDLL_OBJS) $(OBJCNO) $(GS_OBJ).res $(PSSRCDIR)\dw64c.def $(PSSRCDIR)\dw32c.def \
$(PSGEN)lib.rsp $(PSOBJ)gsromfs$(COMPILE_INITS).$(OBJ) $(TOP_MAKEFILES)
copy $(gsld_tr) $(PSGEN)gswin.tr
echo $(PSOBJ)gsromfs$(COMPILE_INITS).$(OBJ) >> $(PSGEN)gswin.tr
echo $(PSOBJ)dwnodllc.obj >> $(PSGEN)gswin.tr
echo $(GLOBJ)dwimg.obj >> $(PSGEN)gswin.tr
echo $(PSOBJ)dwmainc.obj >> $(PSGEN)gswin.tr
echo $(PSOBJ)dwreg.obj >> $(PSGEN)gswin.tr
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(PSGEN)gswin.rsp
!ifdef WIN64
echo /DEF:$(PSSRCDIR)\dw64c.def /OUT:$(GSCONSOLE_XE) >> $(PSGEN)gswin.rsp
!else
echo /DEF:$(PSSRCDIR)\dw32c.def /OUT:$(GSCONSOLE_XE) >> $(PSGEN)gswin.rsp
!endif
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(PSGEN)gswin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(PSGEN)gswin.rsp
!endif
$(LINK) $(LCT) @$(PSGEN)gswin.rsp $(GLOBJ)gsdll @$(PSGEN)gswin.tr $(LINKLIBPATH) @$(LIBCTR) @$(PSGEN)lib.rsp $(GS_OBJ).res $(DWTRACE)
del $(PSGEN)gswin.rsp
del $(PSGEN)gswin.tr
$(GPCL_XE): $(ECHOGS_XE) $(LIBCTR) $(LIB_ALL) $(WINMAINOBJS) $(PCL_DEVS_ALL) $(PCLGEN)pcllib.rsp \
$(PCLOBJ)pclromfs$(COMPILE_INITS).$(OBJ) \
$(ld_tr) $(pcl_tr) $(MAIN_OBJ) $(TOP_OBJ) $(XOBJS) $(INT_ARCHIVE_SOME) \
$(TOP_MAKEFILES)
copy $(pclld_tr) $(PCLGEN)gpclwin.tr
echo $(WINMAINOBJS) $(MAIN_OBJ) $(TOP_OBJ) $(INT_ARCHIVE_SOME) $(XOBJS) >> $(PCLGEN)gpclwin.tr
echo $(PCLOBJ)pclromfs$(COMPILE_INITS).$(OBJ) >> $(PCLGEN)gpclwin.tr
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(PCLGEN)pclwin.rsp
echo /OUT:$(GPCL_XE) >> $(PCLGEN)pclwin.rsp
$(LINK) $(LCT) @$(PCLGEN)pclwin.rsp @$(PCLGEN)gpclwin.tr $(LINKLIBPATH) @$(LIBCTR) @$(PCLGEN)pcllib.rsp
del $(PCLGEN)pclwin.rsp
del $(PCLGEN)gpclwin.tr
$(GXPS_XE): $(ECHOGS_XE) $(LIBCTR) $(LIB_ALL) $(WINMAINOBJS) $(XPS_DEVS_ALL) $(XPSGEN)xpslib.rsp \
$(XPS_TOP_OBJS) $(XPSOBJ)xpsromfs$(COMPILE_INITS).$(OBJ) \
$(ld_tr) $(xps_tr) $(MAIN_OBJ) $(XOBJS) $(INT_ARCHIVE_SOME) \
$(TOP_MAKEFILES)
copy $(xpsld_tr) $(XPSGEN)gxpswin.tr
echo $(WINMAINOBJS) $(MAIN_OBJ) $(XPS_TOP_OBJS) $(INT_ARCHIVE_SOME) $(XOBJS) >> $(XPSGEN)gxpswin.tr
echo $(PCLOBJ)xpsromfs$(COMPILE_INITS).$(OBJ) >> $(XPSGEN)gxpswin.tr
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(XPSGEN)xpswin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)xpswin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(XPSGEN)xpswin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(XPSGEN)xpswin.rsp
!endif
echo /OUT:$(GXPS_XE) >> $(XPSGEN)xpswin.rsp
$(LINK) $(LCT) @$(XPSGEN)xpswin.rsp @$(XPSGEN)gxpswin.tr $(LINKLIBPATH) @$(LIBCTR) @$(XPSGEN)xpslib.rsp
del $(XPSGEN)xpswin.rsp
del $(XPSGEN)gxpswin.tr
$(GPDF_XE): $(ECHOGS_XE) $(LIBCTR) $(LIB_ALL) $(WINMAINOBJS) $(PDF_DEVS_ALL) $(PDFGEN)pdflib.rsp \
$(PDF_TOP_OBJS) $(PDFOBJ)pdfromfs$(COMPILE_INITS).$(OBJ) \
$(ld_tr) $(pdf_tr) $(MAIN_OBJ) $(XOBJS) $(INT_ARCHIVE_SOME) \
$(TOP_MAKEFILES)
copy $(pdfld_tr) $(PDFGEN)gpdfwin.tr
echo $(WINMAINOBJS) $(MAIN_OBJ) $(PDF_TOP_OBJS) $(INT_ARCHIVE_SOME) $(XOBJS) >> $(PDFGEN)gpdfwin.tr
echo $(GPDLOBJ)pdfromfs$(COMPILE_INITS).$(OBJ) >> $(PDFGEN)gpdfwin.tr
echo /SUBSYSTEM:CONSOLE > $(PDFGEN)pdfwin.rsp
echo /OUT:$(GPDF_XE) >> $(XPSGEN)pdfwin.rsp
$(LINK) $(LCT) @$(PDFGEN)pdfwin.rsp @$(PDFGEN)gpdfwin.tr $(LINKLIBPATH) @$(LIBCTR) @$(PDFGEN)pdflib.rsp
del $(XPSGEN)pdfwin.rsp
del $(XPSGEN)gpdfwin.tr
$(GPDL_XE): $(ECHOGS_XE) $(ld_tr) $(gpdl_tr) $(LIBCTR) $(LIB_ALL) $(WINMAINOBJS) $(XPS_DEVS_ALL) $(PCL_DEVS_ALL) $(PDF_DEVS_ALL) \
$(GS_ALL) \
$(GPDLGEN)gpdllib.rsp \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS).$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c0.$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c1.$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c2.$(OBJ) \
$(GPDLOBJ)pdlromfs$(COMPILE_INITS)c3.$(OBJ) \
$(GPDL_PSI_TOP_OBJS) $(PCL_PXL_TOP_OBJS) $(PSI_TOP_OBJ) $(XPS_TOP_OBJ) $(PDF_TOP_OBJ) \
$(MAIN_OBJ) $(XOBJS) $(INT_ARCHIVE_SOME) \
$(TOP_MAKEFILES)
copy $(gpdlld_tr) $(GPDLGEN)gpdlwin.tr
echo $(WINMAINOBJS) $(MAIN_OBJ) $(GPDL_PSI_TOP_OBJS) $(PCL_PXL_TOP_OBJS) $(PSI_TOP_OBJ) $(XPS_TOP_OBJ) $(PDF_TOP_OBJ) $(XOBJS) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS).$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c0.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c1.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c2.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
echo $(GPDLOBJ)pdlromfs$(COMPILE_INITS)c3.$(OBJ) >> $(GPDLGEN)gpdlwin.tr
!if "$(SO_PDFEXPORT_LIB)"!=""
echo $(SO_PDFEXPORT_LIB) >> $(GPDLGEN)gpdlwin.tr
!endif
echo /SUBSYSTEM:CONSOLE$(SUBSUBSYS) > $(GPDLGEN)gpdlwin.rsp
!if "$(PROFILE)"=="1"
echo /Profile >> $(PSGEN)gpdlwin.rsp
!endif
!if "$(SANITIZE)"=="1"
echo /wholearchive:clang_rt.asan-i386.lib >> $(GPDLGEN)gpdlwin.rsp
echo /wholearchive:clang_rt.asan_cxx-i386.lib >> $(GPDLGEN)gpdlwin.rsp
!endif
echo /OUT:$(GPDL_XE) >> $(GPDLGEN)gpdlwin.rsp
$(LINK) $(LCT) @$(GPDLGEN)gpdlwin.rsp @$(GPDLGEN)gpdlwin.tr $(LINKLIBPATH) @$(LIBCTR) @$(GPDLGEN)gpdllib.rsp
del $(GPDLGEN)gpdlwin.rsp
del $(GPDLGEN)gpdlwin.tr
!endif
# ---------------------- Debug targets ---------------------- #
# Simply set some definitions and call ourselves back #
!ifdef WIN64
WINDEFS=WIN64= BUILD_SYSTEM="$(BUILD_SYSTEM)" PGMFILES="$(PGMFILES)" PGMFILESx86="$(PGMFILESx86)"
!else
WINDEFS=BUILD_SYSTEM="$(BUILD_SYSTEM)" PGMFILES="$(PGMFILES)" PGMFILESx86="$(PGMFILESx86)"
!endif
RECURSIVEDEFS=$(WINDEFS)
!ifdef XP
RECURSIVEDEFS=XP=$(XP) $(RECURSIVEDEFS)
!endif
!ifdef DEVSTUDIO
RECURSIVEDEFS=DEVSTUDIO="$(DEVSTUDIO)" $(RECURSIVEDEFS)
!endif
DEBUGDEFS=DEBUG=1 TDEBUG=1 $(RECURSIVEDEFS)
RECURSIVEMAKE=nmake
debug:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE)
gsdebug:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE) gs
gpcl6debug:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE) gpcl6
gxpsdebug:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE) gxps
gpdfdebug:
$(RECURSIVEMAKE) -f $(MAKEFILE) DEVSTUDIO="$(DEVSTUDIO)" FT_BRIDGE=$(FT_BRIDGE) $(DEBUGDEFS) $(WINDEFS) gpdf
gpdldebug:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE) gpdl
debugclean:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE) clean
debugbsc:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(DEBUGDEFS) FT_BRIDGE=$(FT_BRIDGE) bsc
# --------------------- Memento targets --------------------- #
# Simply set some definitions and call ourselves back #
MEMENTODEFS=$(DEBUGDEFS) MEMENTO=1
memento-target:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE)
gsmemento:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE) gs
gpcl6memento:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE) gpcl6
gxpsmemento:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE) gxps
gpdfmemento:
$(RECURSIVEMAKE) -f $(MAKEFILE) DEVSTUDIO="$(DEVSTUDIO)" FT_BRIDGE=$(FT_BRIDGE) $(MEMENTODEFS) $(WINDEFS) gpdf
gpdlmemento:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE) gpdl
mementoclean:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE) clean
mementobsc:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(MEMENTODEFS) FT_BRIDGE=$(FT_BRIDGE) bsc
# --------------------- Profile targets --------------------- #
# Simply set some definitions and call ourselves back #
PROFILEDEFS=$(RECURSIVEDEFS) PROFILE=1
profile:
profile-target:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE)
gsprofile:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE) gs
gpcl6profile:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE) gpcl6
gxpsprofile:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE) gxps
gpdfprofile:
$(RECURSIVEMAKE) -f $(MAKEFILE) DEVSTUDIO="$(DEVSTUDIO)" FT_BRIDGE=$(FT_BRIDGE) $(PROFILEDEFS) $(WINDEFS) gpdf
gpdlprofile:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE) gpdl
profileclean:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE) clean
profilebsc:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(PROFILEDEFS) FT_BRIDGE=$(FT_BRIDGE) bsc
# -------------------- Sanitize targets --------------------- #
# Simply set some definitions and call ourselves back #
SANITIZEDEFS=SANITIZE=1 $(RECURSIVEDEFS)
sanitize:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE)
gssanitize:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE) gs
gpcl6sanitze:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE) gpcl6
gxpssanitize:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE) gxps
gpdlsanitize:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE) gpdl
sanitizeclean:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE) clean
sanitizebsc:
$(RECURSIVEMAKE) -f $(MAKEFILE) $(SANITIZEDEFS) FT_BRIDGE=$(FT_BRIDGE) bsc
# ---------------------- UFST targets ---------------------- #
# Simply set some definitions and call ourselves back #
!ifndef UFST_ROOT
UFST_ROOT=.\ufst
!endif
UFST_ROMFS_ARGS=-b \
-P $(UFST_ROOT)/fontdata/mtfonts/pcl45/mt3/ -d fontdata/mtfonts/pcl45/mt3/ pcl___xj.fco plug__xi.fco wd____xh.fco \
-P $(UFST_ROOT)/fontdata/mtfonts/pclps2/mt3/ -d fontdata/mtfonts/pclps2/mt3/ pclp2_xj.fco \
-c -P $(PSSRCDIR)/../lib/ -d Resource/Init/ FAPIconfig-FCO
UFSTROMFONTDIR=\\\"%%%%%rom%%%%%fontdata/\\\"
UFSTDISCFONTDIR="$(UFST_ROOT)/fontdata"
UFSTBASEDEFS=UFST_BRIDGE=1 FT_BRIDGE=1 UFST_ROOT="$(UFST_ROOT)" UFST_ROMFS_ARGS="$(UFST_ROMFS_ARGS)" UFSTFONTDIR="$(UFSTFONTDIR)" UFSTROMFONTDIR="$(UFSTROMFONTDIR)"
!ifdef WIN64
UFSTDEBUGDEFS=BINDIR=.\ufstdebugbin GLGENDIR=.\ufstdebugobj64 GLOBJDIR=.\ufstdebugobj64 DEBUG=1 TDEBUG=1
UFSTDEFS=BINDIR=.\ufstbin GLGENDIR=.\ufstobj64 GLOBJDIR=.\ufstobj64
!else
UFSTDEBUGDEFS=BINDIR=.\ufstdebugbin GLGENDIR=.\ufstdebugobj DEBUG=1 TDEBUG=1
UFSTDEFS=BINDIR=.\ufstbin GLGENDIR=.\ufstobj GLOBJDIR=.\ufstobj
!endif
ufst-lib:
# Could make this call a makefile in the ufst code?
# cd $(UFST_ROOT)\rts\lib
# $(RECURSIVEMAKE) -f makefile.artifex fco_lib.a if_lib.a psi_lib.a tt_lib.a
ufst-debug: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEBUGDEFS) UFST_CFLAGS="$(UFST_CFLAGS)"
ufst-debug-pcl: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEBUGDEFS) UFST_CFLAGS="$(UFST_CFLAGS)" pcl
ufst-debugclean: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEBUGDEFS) UFST_CFLAGS="$(UFST_CFLAGS)" clean
ufst-debugbsc: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEBUGDEFS) UFST_CFLAGS="$(UFST_CFLAGS)" bsc
ufst: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEFS) UFST_CFLAGS="$(UFST_CFLAGS)"
ufst-pcl: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEFS) UFST_CFLAGS="$(UFST_CFLAGS)" pcl
ufst-clean: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEFS) UFST_CFLAGS="$(UFST_CFLAGS)" clean
ufst-bsc: ufst-lib
$(RECURSIVEMAKE) -f $(MAKEFILE) $(RECURSIVEDEFS) $(UFSTBASEDEFS) $(UFSTDEFS) UFST_CFLAGS="$(UFST_CFLAGS)" bsc
#----------------------- Individual Product Targets --------------------#
gs:$(GS_XE) $(GSCONSOLE_XE)
$(NO_OP)
gpcl6:$(GPCL_XE)
$(NO_OP)
gxps:$(GXPS_XE)
$(NO_OP)
gpdf:$(GPDF_XE)
$(NO_OP)
gpdl:$(GPDL_XE)
$(NO_OP)
# ---------------------- Browse information step ---------------------- #
bsc:
bscmake /o $(SBRDIR)\ghostscript.bsc /v $(GLOBJDIR)\*.sbr
# end of makefile