| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
kconfig: lxdialog: fix 'space' to (de)select options [ Upstream commit 694174f94ebeeb5ec5cc0e9de9b40c82057e1d95 ] In case a menu has comment without letters/numbers (eg. characters matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *), hitting space will cycle through those comments, rather than selecting/deselecting the currently-highlighted option. This is the behaviour of hitting any letter/digit: jump to the next option which prompt starts with that letter. The only letters that do not behave as such are 'y' 'm' and 'n'. Prompts that start with one of those three letters are instead matched on the first letter that is not 'y', 'm' or 'n'. Fix that by treating 'space' as we treat y/m/n, ie. as an action key, not as shortcut to jump to prompt. Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr> Signed-off-by: Peter Korsgaard <peter@korsgaard.com> Signed-off-by: Cherniaev Andrei <dungeonlords789@naver.com> [masahiro: took from Buildroot, adjusted the commit subject] Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 9da4d5c3ea6b90717f427efc6ad6ae8d73d192a3) | 10 个月前 | |
kconfig: change "modules" from sub-option to first-level attribute Now "modules" is the only member of the "option" property. Remove "option", and move "modules" to the top level property. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 5 年前 | |
kconfig: Update all declared targets Currently qconf-cfg.sh is the only script that touches the "-bin" target, even though all of the conf_cfg rules declare that they do. Make the recipe unconditionally touch all declared targets to avoid incompatibilities with upcoming versions of GNU make: https://lists.gnu.org/archive/html/info-gnu/2022-10/msg00008.html e.g. scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/nconf-bin'. scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/mconf-bin'. scripts/kconfig/Makefile:215: warning: pattern recipe did not update peer target 'scripts/kconfig/gconf-bin'. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 3 年前 | |
kbuild: Show marked Kconfig fragments in "help" Currently the Kconfig fragments in kernel/configs and arch/*/configs that aren't used internally aren't discoverable through "make help", which consists of hard-coded lists of config fragments. Instead, list all the fragment targets that have a "# Help: " comment prefix so the targets can be generated dynamically. Add logic to the Makefile to search for and display the fragment and comment. Add comments to fragments that are intended to be direct targets. Signed-off-by: Kees Cook <keescook@chromium.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 2 年前 | |
kconfig: fix potential NULL pointer dereference in conf_askvalue [ Upstream commit b9d21c32dca2167a614e66c9e27999b9e1c33d55 ] In conf_askvalue(), the 'def' argument (retrieved via sym_get_string_value) can be NULL. While current call sites ensure that 'def' is valid, calling printf("%s\n", def) is technically undefined behavior and could lead to a segmentation fault on certain libc implementations if the function were called with a NULL pointer in the future. Improve the robustness of conf_askvalue() by providing an empty string as a fallback. Additionally, remove the redundant re-initialization of the 'line' buffer inside the !sym_is_changeable(sym) block, as it is already properly initialized at the function entry. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xingjing Deng <micro6947@gmail.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://patch.msgid.link/20260306021709.27068-1-micro6947@gmail.com Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 3e135495c1657af7ca8e72b0b1ea792318c6b98d) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 7 天前 | |
kconfig: WERROR unmet symbol dependency [ Upstream commit 15d3f7664d2776c086f813f1efbfe2ae20a85e89 ] When KCONFIG_WERROR env variable is set treat unmet direct symbol dependency as a terminal condition (error). Suggested-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Stable-dep-of: a409fc1463d6 ("kconfig: fix memory leak in sym_warn_unmet_dep()") Signed-off-by: Sasha Levin <sashal@kernel.org> | 1 年前 | |
kconfig: remove wrong expr_trans_bool() [ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ] expr_trans_bool() performs an incorrect transformation. [Test Code] config MODULES def_bool y modules config A def_bool y select C if B != n config B def_tristate m config C tristate [Result] CONFIG_MODULES=y CONFIG_A=y CONFIG_B=m CONFIG_C=m This output is incorrect because CONFIG_C=y is expected. Documentation/kbuild/kconfig-language.rst clearly explains the function of the '!=' operator: If the values of both symbols are equal, it returns 'n', otherwise 'y'. Therefore, the statement: select C if B != n should be equivalent to: select C if y Or, more simply: select C Hence, the symbol C should be selected by the value of A, which is 'y'. However, expr_trans_bool() wrongly transforms it to: select C if B Therefore, the symbol C is selected by (A && B), which is 'm'. The comment block of expr_trans_bool() correctly explains its intention: * bool FOO!=n => FOO ^^^^ If FOO is bool, FOO!=n can be simplified into FOO. This is correct. However, the actual code performs this transformation when FOO is tristate: if (e->left.sym->type == S_TRISTATE) { ^^^^^^^^^^ While it can be fixed to S_BOOLEAN, there is no point in doing so because expr_tranform() already transforms FOO!=n to FOO when FOO is bool. (see the "case E_UNEQUAL" part) expr_trans_bool() is wrong and unnecessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit d9be8eeab03ef6f452d0606c98e32375d2891aa4) | 1 年前 | |
kconfig: remove wrong expr_trans_bool() [ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ] expr_trans_bool() performs an incorrect transformation. [Test Code] config MODULES def_bool y modules config A def_bool y select C if B != n config B def_tristate m config C tristate [Result] CONFIG_MODULES=y CONFIG_A=y CONFIG_B=m CONFIG_C=m This output is incorrect because CONFIG_C=y is expected. Documentation/kbuild/kconfig-language.rst clearly explains the function of the '!=' operator: If the values of both symbols are equal, it returns 'n', otherwise 'y'. Therefore, the statement: select C if B != n should be equivalent to: select C if y Or, more simply: select C Hence, the symbol C should be selected by the value of A, which is 'y'. However, expr_trans_bool() wrongly transforms it to: select C if B Therefore, the symbol C is selected by (A && B), which is 'm'. The comment block of expr_trans_bool() correctly explains its intention: * bool FOO!=n => FOO ^^^^ If FOO is bool, FOO!=n can be simplified into FOO. This is correct. However, the actual code performs this transformation when FOO is tristate: if (e->left.sym->type == S_TRISTATE) { ^^^^^^^^^^ While it can be fixed to S_BOOLEAN, there is no point in doing so because expr_tranform() already transforms FOO!=n to FOO when FOO is bool. (see the "case E_UNEQUAL" part) expr_trans_bool() is wrong and unnecessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit d9be8eeab03ef6f452d0606c98e32375d2891aa4) | 1 年前 | |
kconfig: refactor Makefile to reduce process forks Refactor Makefile and use read-file macro. For Make >= 4.2, it can read out a file by using the built-in function. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> | 3 年前 | |
kconfig: gconf: fix potential memory leak in renderer_edited() [ Upstream commit f72ed4c6a375e52a3f4b75615e4a89d29d8acea7 ] If gtk_tree_model_get_iter() fails, gtk_tree_path_free() is not called. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 44337363300fa0cbc3c0db96e40d60440022b1e6) | 10 个月前 | |
scripts/kconfig/gconf.glade Update broken web addresses. As discussed, remove the DOCTYPE declaration since libglade validates the file against itself.. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz> | 15 年前 | |
kconfig: constify XPM data Constify arrays as well as strings. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 5 年前 | |
kconfig: constify XPM data Constify arrays as well as strings. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 5 年前 | |
kconfig: split menu.c out of parser.y Compile menu.c as an independent compilation unit. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 5 年前 | |
kconfig: fix infinite loop when expanding a macro at the end of file [ Upstream commit af8bbce92044dc58e4cc039ab94ee5d470a621f5 ] A macro placed at the end of a file with no newline causes an infinite loop. [Test Kconfig] $(info,hello) \ No newline at end of file I realized that flex-provided input() returns 0 instead of EOF when it reaches the end of a file. Fixes: 104daea149c4 ("kconfig: reference environment variables directly and remove 'option env='") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> | 2 年前 | |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
kconfig: menuconfig: simplify global jump key assignment Commit 95ac9b3b585d ("menuconfig: Assign jump keys per-page instead of globally") injected a lot of hacks to the bottom of the textbox infrastructure. I reverted many of them without changing the behavior. (almost) Now, the key markers are inserted when constructing the search result instead of updating the text buffer on-the-fly. The buffer passed to the textbox got back to a constant string. The ugly casts from (const char *) to (char *) went away. A disadvantage is that the same key numbers might be displayed multiple times in the dialog if you use a huge window (but I believe it is unlikely to happen). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Jesse Taube <Mr.Bossman075@gmail.com> | 2 年前 | |
kconfig: WERROR unmet symbol dependency [ Upstream commit 15d3f7664d2776c086f813f1efbfe2ae20a85e89 ] When KCONFIG_WERROR env variable is set treat unmet direct symbol dependency as a terminal condition (error). Suggested-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Stable-dep-of: a409fc1463d6 ("kconfig: fix memory leak in sym_warn_unmet_dep()") Signed-off-by: Sasha Levin <sashal@kernel.org> | 1 年前 | |
kconfig: refactor Makefile to reduce process forks Refactor Makefile and use read-file macro. For Make >= 4.2, it can read out a file by using the built-in function. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> | 3 年前 | |
kconfig/mconf: Initialize the default locale at startup [ Upstream commit 3927c4a1084c48ef97f11281a0a43ecb2cb4d6f1 ] Fix bug where make menuconfig doesn't initialize the default locale, which causes ncurses menu borders to be displayed incorrectly (lqqqqk) in UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY. Signed-off-by: Jakub Horký <jakub.git@horky.net> Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net [nathan: Alphabetize locale.h include] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit be46fa4de9dad39a84f38a37d0b134146ec175a2) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 7 个月前 | |
kconfig: remove wrong expr_trans_bool() [ Upstream commit 77a92660d8fe8d29503fae768d9f5eb529c88b36 ] expr_trans_bool() performs an incorrect transformation. [Test Code] config MODULES def_bool y modules config A def_bool y select C if B != n config B def_tristate m config C tristate [Result] CONFIG_MODULES=y CONFIG_A=y CONFIG_B=m CONFIG_C=m This output is incorrect because CONFIG_C=y is expected. Documentation/kbuild/kconfig-language.rst clearly explains the function of the '!=' operator: If the values of both symbols are equal, it returns 'n', otherwise 'y'. Therefore, the statement: select C if B != n should be equivalent to: select C if y Or, more simply: select C Hence, the symbol C should be selected by the value of A, which is 'y'. However, expr_trans_bool() wrongly transforms it to: select C if B Therefore, the symbol C is selected by (A && B), which is 'm'. The comment block of expr_trans_bool() correctly explains its intention: * bool FOO!=n => FOO ^^^^ If FOO is bool, FOO!=n can be simplified into FOO. This is correct. However, the actual code performs this transformation when FOO is tristate: if (e->left.sym->type == S_TRISTATE) { ^^^^^^^^^^ While it can be fixed to S_BOOLEAN, there is no point in doing so because expr_tranform() already transforms FOO!=n to FOO when FOO is bool. (see the "case E_UNEQUAL" part) expr_trans_bool() is wrong and unnecessary. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit d9be8eeab03ef6f452d0606c98e32375d2891aa4) | 1 年前 | |
kconfig: merge_config: use an empty file as initfile [ Upstream commit a26fe287eed112b4e21e854f173c8918a6a8596d ] The scripts/kconfig/merge_config.sh script requires an existing $INITFILE (or the $1 argument) as a base file for merging Kconfig fragments. However, an empty $INITFILE can serve as an initial starting point, later referenced by the KCONFIG_ALLCONFIG Makefile variable if -m is not used. This variable can point to any configuration file containing preset config symbols (the merged output) as stated in Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will contain just the merge output requiring the user to run make (i.e. KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make olddefconfig). Instead of failing when $INITFILE is missing, create an empty file and use it as the starting point for merges. Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit a6f24a41ef5272ef9af33f6bf31fc1c0d5428957) | 1 年前 | |
kconfig: fix static linking of nconf [ Upstream commit baaecfcac559bcac73206df447eb5c385fa22f2a ] When running make nconfig with a static linking host toolchain, the libraries are linked in an incorrect order, resulting in errors similar to the following: $ MAKEFLAGS='HOSTCC=cc\ -static' make nconfig /usr/bin/ld: /usr/lib64/gcc/x86_64-unknown-linux-gnu/14.2.1/../../../../lib64/libpanel.a(p_new.o): in function new_panel': (.text+0x13): undefined reference to _nc_panelhook_sp' /usr/bin/ld: (.text+0x6c): undefined reference to `_nc_panelhook_sp' Fixes: 1c5af5cf9308 ("kconfig: refactor ncurses package checks for building mconf and nconf") Signed-off-by: Arusekk <floss@arusekk.pl> Link: https://patch.msgid.link/20260110114808.22595-1-floss@arusekk.pl [nsc: Added comment about library order] Signed-off-by: Nicolas Schier <nsc@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 1b47e6d3bc026105d22f9aef7b24061e09318c4c) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 5 个月前 | |
kconfig/nconf: Initialize the default locale at startup [ Upstream commit 43c2931a95e6b295bfe9e3b90dbe0f7596933e91 ] Fix bug where make nconfig doesn't initialize the default locale, which causes ncurses menu borders to be displayed incorrectly (lqqqqk) in UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY. Signed-off-by: Jakub Horký <jakub.git@horky.net> Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net [nathan: Alphabetize locale.h include] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit d0141cf6ab1fa80fa3b3928c12369a44ea784332) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 7 个月前 | |
kconfig: nconf: Ensure null termination where strncpy is used [ Upstream commit f468992936894c9ce3b1659cf38c230d33b77a16 ] strncpy() does not guarantee null-termination if the source string is longer than the destination buffer. Ensure the buffer is explicitly null-terminated to prevent potential string overflows or undefined behavior. Signed-off-by: Shankari Anand <shankari.ak0208@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Nicolas Schier <n.schier@avm.de> Acked-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 28d64271510e41adb0ab4b9cdfba1b1d16c4b153) | 10 个月前 | |
kconfig: nconf: Add search jump feature Menuconfig has a feature where you can "press the key in the (#) prefix to jump directly to that location. You will be returned to the current search results after exiting this new menu." This commit adds this feature to nconfig, with almost identical code. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 2 年前 | |
kconfig: split menu.c out of parser.y Compile menu.c as an independent compilation unit. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 5 年前 | |
kconfig: fix possible buffer overflow Buffer 'new_argv' is accessed without bound check after accessing with bound check via 'new_argc' index. Fixes: e298f3b49def ("kconfig: add built-in function support") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 2 年前 | |
kconfig: port qconf to work with Qt6 in addition to Qt5 Tested with Qt5 5.15 and Qt6 6.4. Note that earlier versions of Qt5 are no longer guaranteed to work. Signed-off-by: Boris Kolpackov <boris@codesynthesis.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 2 年前 | |
kconfig: qconf: fix ConfigList::updateListAllforAll() [ Upstream commit 721bfe583c52ba1ea74b3736a31a9dcfe6dd6d95 ] ConfigList::updateListForAll() and ConfigList::updateListAllforAll() are identical. Commit f9b918fae678 ("kconfig: qconf: move ConfigView::updateList(All) to ConfigList class") was a misconversion. Fixes: f9b918fae678 ("kconfig: qconf: move ConfigView::updateList(All) to ConfigList class") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 9ea1cc8b0e9525cfc5a5e04336ed3012713bcce5) | 10 个月前 | |
kconfig: qconf: remove Y, M, N columns There are so many ways to toggle bool / tristate options. I do not know how useful these columns are. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 5 年前 | |
streamline_config.pl: handle also ${CONFIG_FOO} streamline_config.pl currently searches for CONFIG options in Kconfig files as $(CONFIG_FOO). But some Kconfigs (e.g. thunderbolt) use ${CONFIG_FOO}. So fix up the regex to accept both. This fixes: $ make LSMOD= pwd//lsmod localmodconfig using config: '.config' thunderbolt config not found!! Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 3 年前 | |
kconfig: fix memory leak in sym_warn_unmet_dep() [ Upstream commit a409fc1463d664002ea9bf700ae4674df03de111 ] The string allocated in sym_warn_unmet_dep() is never freed, leading to a memory leak when an unmet dependency is detected. Fixes: f8f69dc0b4e0 ("kconfig: make unmet dependency warnings readable") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org> | 1 年前 | |
kconfig: remove const qualifier from str_get() update_text() apparently edits the buffer returned by str_get(). (and there is no reason why it shouldn't) Remove 'const' quailifier and casting. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 10 个月前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 7 天前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 10 个月前 | ||
| 15 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 8 年前 | ||
| 2 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 7 个月前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 5 个月前 | ||
| 7 个月前 | ||
| 10 个月前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 10 个月前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 3 年前 |