/***************************************************************************
                               qucs_init.cpp
                              ---------------
    begin                : Sat May 1 2004
    copyright            : (C) 2004 by Michael Margraf
    email                : michael.margraf@alumni.tu-berlin.de
 ***************************************************************************/

/***************************************************************************
 *                                                                         *
 *   This program is free software; you can redistribute it and/or modify  *
 *   it under the terms of the GNU General Public License as published by  *
 *   the Free Software Foundation; either version 2 of the License, or     *
 *   (at your option) any later version.                                   *
 *                                                                         *
 ***************************************************************************/

#ifdef HAVE_CONFIG_H
# include <config.h>
#endif

#include "main.h"
#include "misc.h"
#include "qucs.h"
#include "extsimkernels/spicecompat.h"
#include "octave_window.h"

#include <QAction>
#include <QShortcut>
#include <QMenu>
#include <QMenuBar>
#include <QToolBar>
#include <QLabel>
#include <QTimer>
#include <QStatusBar>
#include <QDockWidget>
#include <QMessageBox>
#include <QApplication>

/**
 * @brief QucsApp::initActions Initializes all QActions of the application
 */
void QucsApp::initActions()
{
  activeAction = nullptr;   // no active action

  // note: first argument of QAction() for backward compatibility Qt < 3.2

  fileNew = new QAction(QIcon((":/bitmaps/svg/filenew.svg")), tr("&New"), this);
  fileNew->setShortcut(QKeySequence::New);
  fileNew->setStatusTip(tr("Creates a new document"));
  fileNew->setWhatsThis(
	        tr("New\n\nCreates a new schematic or data display document"));
  connect(fileNew, SIGNAL(triggered()), SLOT(slotFileNew()));

  textNew = new QAction(QIcon((":/bitmaps/svg/textnew.svg")), tr("New &Text"), this);
  textNew->setShortcut(tr("Ctrl+Shift+V"));
  textNew->setStatusTip(tr("Creates a new text document"));
  textNew->setWhatsThis(tr("New Text\n\nCreates a new text document"));
  connect(textNew, SIGNAL(triggered()), SLOT(slotTextNew()));

  symNew = new QAction(QIcon((":/bitmaps/svg/symnew.svg")), tr("New symbol"), this);
  symNew->setStatusTip(tr("Creates a new symbol"));
  symNew->setWhatsThis(tr("New\n\nCreates a new schematic symbol document"));
  connect(symNew, SIGNAL(triggered()), SLOT(slotSymbolNew()));


  fileOpen = new QAction(QIcon((":/bitmaps/fileopen.png")),	tr("&Open..."), this);
  fileOpen->setShortcut(QKeySequence::Open);
  fileOpen->setStatusTip(tr("Opens an existing document"));
  fileOpen->setWhatsThis(tr("Open File\n\nOpens an existing document"));
  connect(fileOpen, SIGNAL(triggered()), SLOT(slotFileOpen()));

  fileSave = new QAction(QIcon((":/bitmaps/svg/filesave.svg")),	tr("&Save"), this);
  fileSave->setShortcut(QKeySequence::Save);
  fileSave->setStatusTip(tr("Saves the current document"));
  fileSave->setWhatsThis(tr("Save File\n\nSaves the current document"));
  connect(fileSave, SIGNAL(triggered()), SLOT(slotFileSave()));

  fileSaveAs = new QAction(tr("Save as..."), this);
  //fileSaveAs->setShortcut(QKeySequence::SaveAs);
  fileSaveAs->setStatusTip(	tr("Saves the current document under a new filename"));
  fileSaveAs->setWhatsThis(	tr("Save As\n\nSaves the current document under a new filename"));
  connect(fileSaveAs, SIGNAL(triggered()), SLOT(slotFileSaveAs()));

  fileSaveAll = new QAction(QIcon((":/bitmaps/svg/filesaveall.svg")),	tr("Save &All"), this);
  fileSaveAll->setShortcut(tr("Ctrl+Shift+S"));
  fileSaveAll->setStatusTip(tr("Saves all open documents"));
  fileSaveAll->setWhatsThis(tr("Save All Files\n\nSaves all open documents"));
  connect(fileSaveAll, SIGNAL(triggered()), SLOT(slotFileSaveAll()));

  fileClose = new QAction(QIcon((":/bitmaps/svg/fileclose.svg")), tr("&Close"), this);
  fileClose->setShortcut(Qt::CTRL|Qt::Key_E);
  fileClose->setStatusTip(tr("Closes the current document"));
  fileClose->setWhatsThis(tr("Close File\n\nCloses the current document"));
  connect(fileClose, SIGNAL(triggered()), SLOT(slotFileClose()));

  for (auto & i : fileRecentAction) {
    i = new QAction(this);
    i->setVisible(false);
    connect(i, SIGNAL(triggered()), SLOT(slotOpenRecent()));
  }

  fileClearRecent = new QAction(tr("Clear Recent"), this);
  connect(fileClearRecent, SIGNAL(triggered()), SLOT(slotClearRecentFiles()));

  fileExamples = new QAction(tr("&Examples"), this);
  fileExamples->setStatusTip(tr("Starts file chooser dialog to open one of example schematics"));
  fileExamples->setWhatsThis(
	        tr("Examples\n\nStart file chooser dialog and open one of example schematics"));
  connect(fileExamples, SIGNAL(triggered()), SLOT(slotFileExamples()));


  symEdit = new QAction(tr("&Edit Circuit Symbol"), this);
  symEdit->setShortcut(Qt::Key_F9);
  symEdit->setStatusTip(tr("Edits the symbol for this schematic"));
  symEdit->setWhatsThis(
	tr("Edit Circuit Symbol\n\nEdits the symbol for this schematic"));
  connect(symEdit, SIGNAL(triggered()), SLOT(slotSymbolEdit()));

  fileSettings = new QAction(tr("&Document Settings..."), this);
  fileSettings->setShortcut(tr("Ctrl+."));
  fileSettings->setStatusTip(tr("Document Settings"));
  fileSettings->setWhatsThis(tr("Settings\n\nSets properties of the file"));
  connect(fileSettings, SIGNAL(triggered()), SLOT(slotFileSettings()));

  filePrint = new QAction(QIcon((":/bitmaps/svg/fileprint.svg")), tr("&Print..."), this);
  filePrint->setShortcut(QKeySequence::Print);
  filePrint->setStatusTip(tr("Prints the current document"));
  filePrint->setWhatsThis(tr("Print File\n\nPrints the current document"));
  connect(filePrint, SIGNAL(triggered()), SLOT(slotFilePrint()));

  filePrintFit = new QAction(tr("Print Fit to Page..."), this);
  filePrintFit->setShortcut(tr("Ctrl+Shift+P"));
  filePrintFit->setStatusTip(tr("Print Fit to Page"));
  filePrintFit->setWhatsThis(
	tr("Print Fit to Page\n\n"
	   "Print and fit content to the page size"));
  connect(filePrintFit, SIGNAL(triggered()), SLOT(slotFilePrintFit()));

  fileQuit = new QAction(tr("E&xit"), this);
  fileQuit->setShortcut(QKeySequence::Quit);
  fileQuit->setStatusTip(tr("Quits the application"));
  fileQuit->setWhatsThis(tr("Exit\n\nQuits the application"));
  connect(fileQuit, SIGNAL(triggered()), SLOT(slotFileQuit()));

  applSettings = new QAction(tr("Application Settings..."), this);
  applSettings->setShortcut(tr("Ctrl+,"));
  applSettings->setStatusTip(tr("Application Settings"));
  applSettings->setWhatsThis(
	tr("Qucs Settings\n\nSets properties of the application"));
  connect(applSettings, SIGNAL(triggered()), SLOT(slotApplSettings()));

  refreshSchPath = new QAction(tr("Refresh Search Path..."), this);
  //refreshSchPath->setShortcut(Qt::CTRL+Qt::Key_Comma);
  refreshSchPath->setStatusTip(tr("Refresh Search Path"));
  refreshSchPath->setWhatsThis(
    tr("Refresh Path\n\nRechecks the list of paths for subcircuit files."));
  connect(refreshSchPath, SIGNAL(triggered()), SLOT(slotRefreshSchPath()));

  alignTop = new QAction(tr("Align top"), this);
  alignTop->setShortcut(tr("Ctrl+T"));
  alignTop->setStatusTip(tr("Align top selected elements"));
  alignTop->setWhatsThis(
	tr("Align top\n\nAlign selected elements to their upper edge"));
  connect(alignTop, SIGNAL(triggered()), SLOT(slotAlignTop()));

  alignBottom = new QAction(tr("Align bottom"), this);
  alignBottom->setStatusTip(tr("Align bottom selected elements"));
  alignBottom->setWhatsThis(tr("Align bottom\n\nAlign selected elements to their lower edge"));
  connect(alignBottom, SIGNAL(triggered()), SLOT(slotAlignBottom()));

  alignLeft = new QAction(tr("Align left"), this);
  alignLeft->setStatusTip(tr("Align left selected elements"));
  alignLeft->setWhatsThis(tr("Align left\n\nAlign selected elements to their left edge"));
  connect(alignLeft, SIGNAL(triggered()), SLOT(slotAlignLeft()));

  alignRight = new QAction(tr("Align right"), this);
  alignRight->setStatusTip(tr("Align right selected elements"));
  alignRight->setWhatsThis(tr("Align right\n\n"
                              "Align selected elements to their right edge"));
  connect(alignRight, SIGNAL(triggered()), SLOT(slotAlignRight()));

  distrHor = new QAction(tr("Distribute horizontally"), this);
  distrHor->setStatusTip(tr("Distribute equally horizontally"));
  distrHor->setWhatsThis(tr("Distribute horizontally\n\n"
                            "Distribute horizontally selected elements"));
  connect(distrHor, SIGNAL(triggered()), SLOT(slotDistribHoriz()));

  distrVert = new QAction(tr("Distribute vertically"), this);
  distrVert->setStatusTip(tr("Distribute equally vertically"));
  distrVert->setWhatsThis(tr("Distribute vertically\n\n"
                             "Distribute vertically selected elements"));
  connect(distrVert, SIGNAL(triggered()), SLOT(slotDistribVert()));

  centerHor = new QAction(tr("Center horizontally"), this);
  centerHor->setStatusTip(tr("Center horizontally selected elements"));
  centerHor->setWhatsThis(tr("Center horizontally\n\n"
                             "Center horizontally selected elements"));
  connect(centerHor, SIGNAL(triggered()), SLOT(slotCenterHorizontal()));

  centerVert = new QAction(tr("Center vertically"), this);
  centerVert->setStatusTip(tr("Center vertically selected elements"));
  centerVert->setWhatsThis(	tr("Center vertically\n\n"
                                  "Center vertically selected elements"));
  connect(centerVert, SIGNAL(triggered()), SLOT(slotCenterVertical()));

  onGrid = new QAction(tr("Set on Grid"), this);
  onGrid->setShortcut(tr("Ctrl+U"));
  onGrid->setStatusTip(tr("Sets selected elements on grid"));
  onGrid->setWhatsThis(tr("Set on Grid\n\nSets selected elements on grid"));
  onGrid->setCheckable(true);
  connect(onGrid, SIGNAL(toggled(bool)), SLOT(slotOnGrid(bool)));

  moveText = new QAction(tr("Move Component Text"), this);
  moveText->setShortcut(tr("Ctrl+K"));
  moveText->setStatusTip(tr("Moves the property text of components"));
  moveText->setWhatsThis(
	tr("Move Component Text\n\nMoves the property text of components"));
  moveText->setCheckable(true);
  connect(moveText, SIGNAL(toggled(bool)), SLOT(slotMoveText(bool)));

  changeProps = new QAction(tr("Replace..."), this);
  changeProps->setShortcut(Qt::Key_F7);
  changeProps->setStatusTip(tr("Replace component properties or VHDL code"));
  changeProps->setWhatsThis(
	tr("Replace\n\nChange component properties\nor\ntext in VHDL code"));
  connect(changeProps, SIGNAL(triggered()), SLOT(slotChangeProps()));

  editCut = new QAction(QIcon((":/bitmaps/svg/editcut.svg")),	tr("Cu&t"), this);
  editCut->setShortcut(tr("Ctrl+X"));
  editCut->setStatusTip(tr("Cuts out the selection and puts it into the clipboard"));
  editCut->setWhatsThis(tr("Cut\n\nCuts out the selection and puts it into the clipboard"));
  connect(editCut, SIGNAL(triggered()), SLOT(slotEditCut()));

  editCopy = new QAction(QIcon((":/bitmaps/svg/editcopy.svg")), tr("&Copy"), this);
  editCopy->setShortcut(QKeySequence::Copy);
  editCopy->setStatusTip(tr("Copies the selection into the clipboard"));
  editCopy->setWhatsThis(tr("Copy\n\nCopies the selection into the clipboard"));
  connect(editCopy, SIGNAL(triggered()), SLOT(slotEditCopy()));

  editPaste = new QAction(QIcon((":/bitmaps/svg/editpaste.svg")), tr("&Paste"), this);
  editPaste->setShortcut(QKeySequence::Paste);
  editPaste->setStatusTip(tr("Pastes the clipboard contents to the cursor position"));
  editPaste->setWhatsThis(tr("Paste\n\nPastes the clipboard contents to the cursor position"));
  editPaste->setCheckable(true);
  connect(editPaste, SIGNAL(toggled(bool)), SLOT(slotEditPaste(bool)));

  editDelete = new QAction(QIcon((":/bitmaps/svg/editdelete.svg")), tr("&Delete"), this);
#ifdef __APPLE__
  editDelete->setShortcuts({QKeySequence(Qt::Key_Backspace), QKeySequence(Qt::Key_Delete)});
#else
  editDelete->setShortcut(QKeySequence::Delete);
#endif  
  editDelete->setStatusTip(tr("Deletes the selected components"));
  editDelete->setWhatsThis(tr("Delete\n\nDeletes the selected components"));
  editDelete->setCheckable(true);
  connect(editDelete, SIGNAL(toggled(bool)), SLOT(slotEditDelete(bool)));

  editFind = new QAction(tr("Find..."), this);
  editFind->setShortcut(QKeySequence::Find);
  editFind->setStatusTip(tr("Find a piece of text"));
  editFind->setWhatsThis(tr("Find\n\nSearches for a piece of text"));
  connect(editFind, SIGNAL(triggered()), SLOT(slotEditFind()));

  // to ease usage with notebooks, backspace can also be used to delete
  // currently not supported
  //mainAccel->connectItem(mainAccel->insertItem(Qt::Key_Backspace),
  //                       editDelete, SLOT(toggle()) );

  exportAsImage = new QAction(tr("Export as image..."),this);
  connect(exportAsImage,SIGNAL(triggered()),SLOT(slotSaveSchematicToGraphicsFile()));
  exportAsImage->setStatusTip(tr("Exports the current document to an image file"));
  exportAsImage->setWhatsThis(tr("Export as image\n\nExports the current document to an image file"));

  // cursor left/right/up/down to move marker on a graph
  cursorLeft = new QShortcut(QKeySequence(Qt::Key_Left), this);
  connect(cursorLeft, SIGNAL(activated()), SLOT(slotCursorLeft()));

  cursorRight = new QShortcut(QKeySequence(Qt::Key_Right), this);
  connect(cursorRight, SIGNAL(activated()), SLOT(slotCursorRight()));

  cursorUp = new QShortcut(QKeySequence(Qt::Key_Up), this);
  connect(cursorUp, SIGNAL(activated()), SLOT(slotCursorUp()));

  cursorDown = new QShortcut(QKeySequence(Qt::Key_Down), this);
  connect(cursorDown, SIGNAL(activated()), SLOT(slotCursorDown()));

  undo = new QAction(QIcon((":/bitmaps/svg/editundo.svg")), tr("&Undo"), this);
  undo->setShortcut(QKeySequence::Undo);
  undo->setStatusTip(tr("Undoes the last command"));
  undo->setWhatsThis(tr("Undo\n\nMakes the last action undone"));
  connect(undo, SIGNAL(triggered()), SLOT(slotEditUndo()));

  redo = new QAction(QIcon((":/bitmaps/svg/editredo.svg")), tr("&Redo"), this);
  redo->setShortcut(QKeySequence::Redo);
  redo->setStatusTip(tr("Redoes the last command"));
  redo->setWhatsThis(tr("Redo\n\nRepeats the last action once more"));
  connect(redo, SIGNAL(triggered()), SLOT(slotEditRedo()));

  projNew = new QAction(tr("&New Project..."), this);
  projNew->setShortcut(tr("Ctrl+Shift+N"));
  projNew->setStatusTip(tr("Creates a new project"));
  projNew->setWhatsThis(tr("New Project\n\nCreates a new project"));
  connect(projNew, SIGNAL(triggered()), SLOT(slotButtonProjNew()));

  projOpen = new QAction(tr("&Open Project..."), this);
	projOpen->setShortcut(tr("Ctrl+Shift+O"));
  projOpen->setStatusTip(tr("Opens an existing project"));
  projOpen->setWhatsThis(tr("Open Project\n\nOpens an existing project"));
  connect(projOpen, SIGNAL(triggered()), SLOT(slotMenuProjOpen()));

  projDel = new QAction(tr("&Delete Project..."), this);
  projDel->setShortcut(tr("Ctrl+Shift+D"));
  projDel->setStatusTip(tr("Deletes an existing project"));
  projDel->setWhatsThis(tr("Delete Project\n\nDeletes an existing project"));
  connect(projDel, SIGNAL(triggered()), SLOT(slotMenuProjDel()));

  projClose = new QAction(tr("&Close Project"), this);
  projClose->setShortcut(tr("Ctrl+Shift+W"));
  projClose->setStatusTip(tr("Closes the current project"));
  projClose->setWhatsThis(tr("Close Project\n\nCloses the current project"));
  connect(projClose, SIGNAL(triggered()), SLOT(slotMenuProjClose()));

  addToProj = new QAction(tr("&Add Files to Project..."), this);
  addToProj->setShortcut(tr("Ctrl+Shift+A"));
  addToProj->setStatusTip(tr("Copies files to project directory"));
  addToProj->setWhatsThis(tr("Add Files to Project\n\nCopies files to project directory"));
  connect(addToProj, SIGNAL(triggered()), SLOT(slotAddToProject()));

  createLib = new QAction(tr("Create &Library..."), this);
  createLib->setShortcut(tr("Ctrl+Shift+L"));
  createLib->setStatusTip(tr("Create Library from Subcircuits"));
  createLib->setWhatsThis(
	tr("Create Library\n\nCreate Library from Subcircuits"));
  connect(createLib, SIGNAL(triggered()), SLOT(slotCreateLib()));

  graph2csv = new QAction(tr("Export to &CSV..."), this);
  graph2csv->setShortcut(tr("Ctrl+Shift+C"));
  graph2csv->setStatusTip(tr("Convert graph data to CSV file"));
  graph2csv->setWhatsThis(tr("Export to CSV\n\nConvert graph data to CSV file"));
  connect(graph2csv, SIGNAL(triggered()), SLOT(slotExportGraphAsCsv()));

  buildModule = new QAction(tr("Build Verilog-A module..."), this);
  buildModule->setStatusTip(tr("Run admsXml and C++ compiler"));
  buildModule->setWhatsThis(tr("Build Verilog-A module\nRuns amdsXml and C++ compiler"));
  connect(buildModule, SIGNAL(triggered()), SLOT(slotBuildModule()));

  loadModule = new QAction(tr("Load Verilog-A module..."), this);
  loadModule->setStatusTip(tr("Select Verilog-A symbols to be loaded"));
  loadModule->setWhatsThis(tr("Load Verilog-A module\nLet the user select and load symbols"));
  connect(loadModule, SIGNAL(triggered()), SLOT(slotLoadModule()));

  magAll = new QAction(QIcon((":/bitmaps/svg/viewmagfit.svg")), tr("View All"), this);
  magAll->setShortcut(Qt::Key_0);
  magAll->setStatusTip(tr("Show the whole page"));
  magAll->setWhatsThis(tr("View All\n\nShows the whole page content"));
  connect(magAll, SIGNAL(triggered()), SLOT(slotShowAll()));

  magSel = new QAction(QIcon((":/bitmaps/svg/viewmagsel.svg")), tr("Zoom to selection"), this);
  magSel->setShortcut(tr("Z"));
  magSel->setStatusTip(tr("Zoom to selected components"));
  magSel->setWhatsThis(tr("Zoom to selection\n\nZoom to selected components"));
  connect(magSel, SIGNAL(triggered()), SLOT(slotZoomToSelection()));

  magOne = new QAction(QIcon((":/bitmaps/svg/viewmag1.svg")), tr("View 1:1"), this);
  magOne->setShortcut(Qt::Key_1);
  magOne->setStatusTip(tr("Views without magnification"));
  magOne->setWhatsThis(tr("View 1:1\n\nShows the page content without magnification"));
  connect(magOne, SIGNAL(triggered()), SLOT(slotShowOne()));

  magPlus = new QAction(QIcon((":/bitmaps/svg/viewmag+.svg")),	tr("Zoom in"), this);
  magPlus->setShortcut(QKeySequence::ZoomIn);
  magPlus->setStatusTip(tr("Zooms into the current view"));
  magPlus->setWhatsThis(tr("Zoom in\n\nZooms the current view"));
  magPlus->setCheckable(true);
  connect(magPlus, SIGNAL(toggled(bool)), SLOT(slotZoomIn(bool)));

  magMinus = new QAction(QIcon((":/bitmaps/svg/viewmag-.svg")), tr("Zoom out"), this);
  magMinus->setShortcut(QKeySequence::ZoomOut);
  magMinus->setStatusTip(tr("Zooms out the current view"));
  magMinus->setWhatsThis(tr("Zoom out\n\nZooms out the current view"));
  connect(magMinus, SIGNAL(triggered()), SLOT(slotZoomOut()));

  QAction *escape = new QAction(this);
  escape->setShortcut(Qt::Key_Escape);
  connect(escape, SIGNAL(triggered()), SLOT(slotEscape()));
  this->addAction(escape);

  select = new QAction(QIcon((":/bitmaps/svg/pointer.svg")), tr("Select"), this);
  select->setStatusTip(tr("Activate select mode"));
  select->setWhatsThis(tr("Select\n\nActivates select mode"));
  select->setCheckable(true);
  connect(select, SIGNAL(toggled(bool)), SLOT(slotSelect(bool)));

  selectAll = new QAction(tr("Select All"), this);
  selectAll->setShortcut(tr("Ctrl+A"));
  selectAll->setStatusTip(tr("Selects all elements"));
  selectAll->setWhatsThis(tr("Select All\n\nSelects all elements of the document"));
  connect(selectAll, SIGNAL(triggered()), SLOT(slotSelectAll()));

  selectMarker = new QAction(tr("Select Markers"), this);
  selectMarker->setShortcut(tr("Ctrl+Shift+M"));
  selectMarker->setStatusTip(tr("Selects all markers"));
  selectMarker->setWhatsThis(tr("Select Markers\n\nSelects all diagram markers of the document"));
  connect(selectMarker, SIGNAL(triggered()), SLOT(slotSelectMarker()));

  editRotate = new QAction(QIcon(":/bitmaps/svg/rotate_ccw.svg"), tr("Rotate"), this);
  editRotate->setShortcut(tr("Ctrl+R"));
  editRotate->setStatusTip(tr("Rotates the selected component by 90\x00B0"));
  editRotate->setWhatsThis(tr("Rotate\n\nRotates the selected component by 90\x00B0 counter-clockwise"));
  editRotate->setCheckable(true);
  connect(editRotate, SIGNAL(toggled(bool)), SLOT(slotEditRotate(bool)));

  editMirror = new QAction(QIcon(":/bitmaps/svg/mirror.svg"), tr("Mirror about X Axis"), this);
  editMirror->setShortcut(tr("Ctrl+J"));
  editMirror->setStatusTip(tr("Mirrors the selected item about X Axis"));
  editMirror->setWhatsThis(tr("Mirror about X Axis\n\nMirrors the selected item about X Axis"));
  editMirror->setCheckable(true);
  connect(editMirror, SIGNAL(toggled(bool)), SLOT(slotEditMirrorX(bool)));

  editMirrorY = new QAction(QIcon(":/bitmaps/svg/mirrory.svg"), tr("Mirror about Y Axis"), this);
  editMirrorY->setShortcut(tr("Ctrl+M"));
  editMirrorY->setStatusTip(tr("Mirrors the selected item about Y Axis"));
  editMirrorY->setWhatsThis(tr("Mirror about Y Axis\n\nMirrors the selected item about Y Axis"));
  editMirrorY->setCheckable(true);
  connect(editMirrorY, SIGNAL(toggled(bool)), SLOT(slotEditMirrorY(bool)));

  intoH = new QAction(QIcon((":/bitmaps/svg/bottom.svg")), tr("Go into Subcircuit"), this);
  intoH->setShortcut(tr("Ctrl+I"));
  intoH->setStatusTip(tr("Goes inside the selected subcircuit"));
  intoH->setWhatsThis(
	tr("Go into Subcircuit\n\nGoes inside the selected subcircuit"));
  connect(intoH, SIGNAL(triggered()), SLOT(slotIntoHierarchy()));

  popH = new QAction(QIcon((":/bitmaps/svg/top.svg")), tr("Pop out"), this);
  popH->setShortcut(tr("Ctrl+H"));
  popH->setStatusTip(tr("Pop outside subcircuit"));
  popH->setWhatsThis(tr("Pop out\n\nGoes up one hierarchy level, i.e. leaves subcircuit"));
  connect(popH, SIGNAL(triggered()), SLOT(slotPopHierarchy()));
  popH->setEnabled(false);  // only enabled if useful !!!!

  editActivate = new QAction(QIcon(":bitmaps/svg/deactiv.svg"),	tr("Deactivate/Activate"), this);
  editActivate->setShortcut(tr("Ctrl+D"));
  editActivate->setStatusTip(tr("Deactivate/Activate selected components"));
  editActivate->setWhatsThis(tr("Deactivate/Activate\n\nDeactivate/Activate the selected components"));
  editActivate->setCheckable(true);
  connect(editActivate, SIGNAL(toggled(bool)), SLOT(slotEditActivate(bool)));

  insEquation = new QAction(QIcon(":bitmaps/svg/equation.svg"),	tr("Insert Equation"), this);
  insEquation->setShortcut(tr("Ctrl+<"));
  insEquation->setStatusTip(tr("Inserts an equation"));
  insEquation->setWhatsThis(tr("Insert Equation\n\nInserts a user defined equation"));
  insEquation->setCheckable(true);
  connect(insEquation, SIGNAL(toggled(bool)), SLOT(slotInsertEquation(bool)));

  insGround = new QAction(QIcon(":/bitmaps/svg/ground.svg"), tr("Insert Ground"), this);
  insGround->setShortcut(tr("Ctrl+G"));
  insGround->setStatusTip(tr("Inserts a ground symbol"));
  insGround->setWhatsThis(tr("Insert Ground\n\nInserts a ground symbol"));
  insGround->setCheckable(true);
  connect(insGround, SIGNAL(toggled(bool)), SLOT(slotInsertGround(bool)));

  insPort = new QAction(QIcon(":/bitmaps/svg/port.svg"),	tr("Insert Port"), this);
  insPort->setStatusTip(tr("Inserts a port symbol"));
  insPort->setWhatsThis(tr("Insert Port\n\nInserts a port symbol"));
  insPort->setCheckable(true);
  connect(insPort, SIGNAL(toggled(bool)), SLOT(slotInsertPort(bool)));

  insWire = new QAction(QIcon(":bitmaps/svg/wire.svg"),	tr("Wire"), this);
  insWire->setShortcut(tr("Ctrl+W"));
  insWire->setStatusTip(tr("Inserts a wire"));
  insWire->setWhatsThis(tr("Wire\n\nInserts a wire"));
  insWire->setCheckable(true);
  connect(insWire, SIGNAL(toggled(bool)), SLOT(slotSetWire(bool)));

  insLabel = new QAction(QIcon(":/bitmaps/svg/nodename.svg"), tr("Wire Label"), this);
  insLabel->setShortcut(tr("Ctrl+L"));
  insLabel->setStatusTip(tr("Inserts a wire or pin label"));
  insLabel->setWhatsThis(tr("Wire Label\n\nInserts a wire or pin label"));
  insLabel->setCheckable(true);
  connect(insLabel, SIGNAL(toggled(bool)), SLOT(slotInsertLabel(bool)));

  insEntity = new QAction(tr("VHDL entity"), this);
  insEntity->setShortcut(tr("Ctrl+Space"));
  insEntity->setStatusTip(tr("Inserts skeleton of VHDL entity"));
  insEntity->setWhatsThis(
	tr("VHDL entity\n\nInserts the skeleton of a VHDL entity"));
  connect(insEntity, SIGNAL(triggered()), SLOT(slotInsertEntity()));

  callEditor = new QAction(tr("Text Editor"), this);
  callEditor->setShortcut(tr("Ctrl+1"));
  callEditor->setStatusTip(tr("Starts the Qucs text editor"));
  callEditor->setWhatsThis(tr("Text editor\n\nStarts the Qucs text editor"));
  connect(callEditor, SIGNAL(triggered()), SLOT(slotCallEditor()));

  callFilter = new QAction(tr("Filter synthesis"), this);
  callFilter->setShortcut(tr("Ctrl+2"));
  callFilter->setStatusTip(tr("Starts QucsFilter"));
  callFilter->setWhatsThis(tr("Filter synthesis\n\nStarts QucsFilter"));
  connect(callFilter, SIGNAL(triggered()), SLOT(slotCallFilter()));

  callActiveFilter = new QAction(tr("Active filter synthesis"),this);
  callActiveFilter->setShortcut(tr("Ctrl+3"));
  callActiveFilter->setStatusTip(tr("Starts QucsActiveFilter"));
  callActiveFilter->setWhatsThis(tr("Active filter synthesis\n\nStarts QucsActiveFilter"));
  connect(callActiveFilter, SIGNAL(triggered()), SLOT(slotCallActiveFilter()));

  callLine = new QAction(tr("Line calculation"), this);
  callLine->setShortcut(tr("Ctrl+4"));
  callLine->setStatusTip(tr("Starts QucsTrans"));
  callLine->setWhatsThis(tr("Line calculation\n\nStarts transmission line calculator"));
  connect(callLine, SIGNAL(triggered()), SLOT(slotCallLine()));

  callMatch = new QAction(tr("Matching Circuit"), this);
  callMatch->setShortcut(tr("Ctrl+5"));
  callMatch->setStatusTip(tr("Creates Matching Circuit"));
  callMatch->setWhatsThis(tr("Matching Circuit\n\nDialog for Creating Matching Circuit"));
  connect(callMatch, SIGNAL(triggered()), SLOT(slotCallMatch()));

  callAtt = new QAction(tr("Attenuator synthesis"), this);
  callAtt->setShortcut(tr("Ctrl+6"));
  callAtt->setStatusTip(tr("Starts QucsAttenuator"));
  callAtt->setWhatsThis(tr("Attenuator synthesis\n\nStarts attenuator calculation program"));
  connect(callAtt, SIGNAL(triggered()), SLOT(slotCallAtt()));

  callPwrComb = new QAction(tr("Power combining"), this);
  callPwrComb->setShortcut(tr("Ctrl+7"));
  callPwrComb->setStatusTip(tr("Starts QucsPowerCombining"));
  callPwrComb->setWhatsThis(tr("Power combining\n\nStarts power combining calculation program"));
  connect(callPwrComb, SIGNAL(triggered()), SLOT(slotCallPwrComb()));

  callSPAR_Viewer = new QAction(tr("S-parameter Viewer"), this);
  callSPAR_Viewer->setStatusTip(tr("Starts S-parameter viewer"));
  callSPAR_Viewer->setWhatsThis(tr("S-parameter Viewer\n\nStarts S-parameter viewer"));
  connect(callSPAR_Viewer, SIGNAL(triggered()), SLOT(slotCallSPAR_Viewer()));

  callConverter = new QAction(tr("Data files converter"), this);
  callConverter->setShortcut(tr("Ctrl+8"));
  callConverter->setStatusTip(tr("Convert data file"));
  callConverter->setWhatsThis(tr("Import/Export Data\n\nConvert data file to various file formats"));
  connect(callConverter, SIGNAL(triggered()), SLOT(slotImportData()));

  callRFLayout = new QAction(tr("RF Layout"), this);
  callRFLayout->setShortcut(tr("Ctrl+9"));
  callRFLayout->setStatusTip(tr("Starts Qucs-RFLayout"));
  callRFLayout->setWhatsThis(tr("Power combining\n\nStarts power combining calculation program"));
  connect(callRFLayout, SIGNAL(triggered()), SLOT(slotCallRFLayout()));

  simulate = new QAction(QIcon((":/bitmaps/svg/gear.svg")), tr("Simulate"), this);
  simulate->setShortcut(Qt::Key_F2);
  simulate->setStatusTip(tr("Simulates the current schematic"));
  simulate->setWhatsThis(tr("Simulate\n\nSimulates the current schematic"));
  connect(simulate, SIGNAL(triggered()), SLOT(slotSimulate()));

  tune = new QAction(QIcon((":/bitmaps/svg/tune.svg")),tr("Tune"), this);
  tune->setShortcut(Qt::Key_F3);
  tune->setStatusTip(tr("Tuner"));
  tune->setWhatsThis(tr("Allows to live tune variables and show the result in the dataview"));
  tune->setCheckable(true);
  connect(tune, SIGNAL(toggled(bool)), SLOT(slotTune(bool)));

  dpl_sch = new QAction(QIcon((":/bitmaps/svg/rebuild.svg")), tr("View Data Display/Schematic"), this);
  dpl_sch->setShortcut(Qt::Key_F4);
  dpl_sch->setStatusTip(tr("Changes to data display or schematic page"));
  dpl_sch->setWhatsThis(tr("View Data Display/Schematic\n\nChanges to data display or schematic page"));
  connect(dpl_sch, SIGNAL(triggered()), SLOT(slotToPage()));

  dcbias = new QAction(tr("Calculate DC bias"), this);
  dcbias->setShortcut(Qt::Key_F8);
  dcbias->setStatusTip(tr("Calculates DC bias and shows it"));
  dcbias->setWhatsThis(tr("Calculate DC bias\n\nCalculates DC bias and shows it"));
  connect(dcbias, SIGNAL(triggered()), SLOT(slotDCbias()));

  save_netlist = new QAction(tr("Save netlist"), this);
  save_netlist->setStatusTip(tr("Save netlist"));
  save_netlist->setWhatsThis(tr(QString::fromUtf8("Save netlist to %1").arg(a_netlist2Console ? "console" : "file").toLatin1().constData()));
  connect(save_netlist, SIGNAL(triggered()), SLOT(slotSaveNetlist()));

  saveCdlNetlist = new QAction(tr("Save CDL netlist"), this);
  saveCdlNetlist->setStatusTip(tr("Save CDL netlist"));
  saveCdlNetlist->setWhatsThis(tr(QString::fromUtf8("Save CDL netlist to %1").arg(a_netlist2Console ? "console" : "file").toLatin1().constData()));
  connect(saveCdlNetlist, SIGNAL(triggered()), SLOT(slotSaveCdlNetlist()));

  setMarker = new QAction(QIcon((":/bitmaps/svg/marker.svg")),	tr("Set Marker on Graph"), this);
  setMarker->setShortcut(Qt::CTRL|Qt::Key_B);
  setMarker->setStatusTip(tr("Sets a marker on a diagram's graph"));
  setMarker->setWhatsThis(tr("Set Marker\n\nSets a marker on a diagram's graph"));
  setMarker->setCheckable(true);
  connect(setMarker, SIGNAL(toggled(bool)), SLOT(slotSetMarker(bool)));

  setDiagramLimits = new QAction(QIcon((":/bitmaps/svg/viewwave.svg")),	tr("Set Diagram Limits"), this);
  //setDiagramLimits->setShortcut(tr("Ctrl+E"));
  setDiagramLimits->setStatusTip(tr("Pick the diagram limits using the mouse. Right click for default."));
  setDiagramLimits->setWhatsThis(tr("Set Diagram Limits\n\nPick the diagram limits using the mouse. Right click for default."));
  setDiagramLimits->setCheckable(true);
  connect(setDiagramLimits, SIGNAL(toggled(bool)), SLOT(slotSetDiagramLimits(bool)));

  resetDiagramLimits = new QAction(tr("Reset Diagram Limits"), this);
  resetDiagramLimits->setShortcut(tr("Ctrl+Shift+E"));
  resetDiagramLimits->setStatusTip(tr("Resets the limits for all axis to auto."));
  resetDiagramLimits->setWhatsThis(tr("Reset Diagram Limits\n\nResets the limits for all axis to auto."));
  connect(resetDiagramLimits, SIGNAL(triggered()), SLOT(slotResetDiagramLimits()));

  showGrid = new QAction(tr("Show Grid (current document)"), this);
  showGrid->setCheckable(true);
  showGrid->setShortcut(tr("Alt+G"));
  showGrid->setStatusTip(tr("Show or hide the grid for the current document."));
  showGrid->setWhatsThis(tr("Show / Hide Grid\n\nShow or hide the grid for the current document."));
  connect(showGrid, SIGNAL(triggered()), SLOT(slotShowGrid()));

  showMsg = new QAction(tr("Show Last Messages"), this);
  showMsg->setShortcut(Qt::Key_F5);
  showMsg->setStatusTip(tr("Shows last simulation messages"));
  showMsg->setWhatsThis(tr("Show Last Messages\n\nShows the messages of the last simulation"));
  connect(showMsg, SIGNAL(triggered()), SLOT(slotShowLastMsg()));

  showNet = new QAction(tr("Show Last Netlist"), this);
  showNet->setShortcut(Qt::Key_F6);
  showNet->setStatusTip(tr("Shows last simulation netlist"));
  showNet->setWhatsThis(tr("Show Last Netlist\n\nShows the netlist of the last simulation"));
  connect(showNet, SIGNAL(triggered()), SLOT(slotShowLastNetlist()));

  simSettings = new QAction(tr("Simulators Settings..."),this);
  connect(simSettings,SIGNAL(triggered()),SLOT(slotSimSettings()));
  buildVAModule = new QAction(tr("Build Verilog-A module from subcircuit"),this);
  connect(buildVAModule,SIGNAL(triggered()),SLOT(slotBuildVAModule()));
  //buildIFS = new QAction(tr("Build XSPICE IFS file from subcircuit"),this);
  //connect(buildIFS,SIGNAL(triggered()),SLOT(slotBuildXSPICEIfs()));

  viewBrowseDock = new QAction(tr("&Dock Window"), this);
  viewBrowseDock->setCheckable(true);
  viewBrowseDock->setStatusTip(tr("Enables/disables the browse dock window"));
  viewBrowseDock->setWhatsThis(tr("Browse Window\n\nEnables/disables the browse dock window"));
  connect(viewBrowseDock, SIGNAL(toggled(bool)), SLOT(slotViewBrowseDock(bool)));

  viewOctaveDock = new QAction(tr("&Octave Window"), this);
  viewOctaveDock->setCheckable(true);
  viewOctaveDock->setStatusTip(tr("Shows/hides the Octave dock window"));
  viewOctaveDock->setWhatsThis(tr("Octave Window\n\nShows/hides the Octave dock window"));
  connect(viewOctaveDock, SIGNAL(toggled(bool)), SLOT(slotViewOctaveDock(bool)));

  helpIndex = new QAction(tr("Help Index..."), this);
  helpIndex->setShortcut(Qt::Key_F1);
  helpIndex->setStatusTip(tr("Index of Qucs Help"));
  helpIndex->setWhatsThis(tr("Help Index\n\nIndex of intern Qucs help"));
  connect(helpIndex, SIGNAL(triggered()), SLOT(slotHelpIndex()));

  /*helpQucsIndex = new QAction(tr("Help Index (basic Qucs version)"), this);
  helpQucsIndex->setStatusTip(tr("Index of basic Qucs Help"));
  helpQucsIndex->setWhatsThis(tr("Help Index\n\nIndex of basic Qucs help"));
  connect(helpQucsIndex, SIGNAL(triggered()), SLOT(slotHelpQucsIndex()));*/

  helpGetStart = new QAction(tr("Getting Started..."), this);
  helpGetStart->setStatusTip(tr("Getting Started with Qucs"));
  helpGetStart->setWhatsThis(tr("Getting Started\n\nShort introduction into Qucs"));
  connect(helpGetStart, SIGNAL(triggered()), SLOT(slotGettingStarted()));

  helpAboutApp = new QAction(tr("&About Qucs-S"), this);
  helpAboutApp->setStatusTip(tr("About the application"));
  helpAboutApp->setWhatsThis(tr("About\n\nAbout the application"));
  connect(helpAboutApp, SIGNAL(triggered()),this, SLOT(slotHelpAbout()));

  helpAboutQt = new QAction(tr("&About Qt"), this);
  helpAboutQt->setStatusTip(tr("About Qt"));
  helpAboutQt->setWhatsThis(tr("About Qt\n\nAbout Qt by Trolltech"));
  connect(helpAboutQt, SIGNAL(triggered()), qApp, SLOT(aboutQt()));
}

// ----------------------------------------------------------
void QucsApp::initMenuBar()
{
  fileMenu = new QMenu(tr("&File"));  // menuBar entry fileMenu
  fileMenu->addAction(fileNew);
  fileMenu->addAction(textNew);
  fileMenu->addAction(symNew);
  fileMenu->addAction(fileOpen);
  fileMenu->addAction(fileClose);

  recentFilesMenu = new QMenu(tr("Open Recent"),fileMenu);
  fileMenu->addMenu(recentFilesMenu);
  for (auto & i : fileRecentAction) {
    recentFilesMenu->addAction(i);
  }
  recentFilesMenu->addSeparator();
  recentFilesMenu->addAction(fileClearRecent);

  fileMenu->addSeparator();
  fileMenu->addAction(fileSave);
  fileMenu->addAction(fileSaveAll);
  fileMenu->addAction(fileSaveAs);
  fileMenu->addAction(exportAsImage);
  fileMenu->addAction(filePrint);
  fileMenu->addAction(filePrintFit);
  fileMenu->addSeparator();
  fileMenu->addAction(fileExamples);
  fileMenu->addSeparator();
  fileMenu->addAction(fileSettings);
  fileMenu->addAction(symEdit);
  fileMenu->addSeparator();
  fileMenu->addAction(applSettings);
  fileMenu->addAction(refreshSchPath);
  fileMenu->addSeparator();
  fileMenu->addAction(fileQuit);

  editMenu = new QMenu(tr("&Edit"));  // menuBar entry editMenu
  editMenu->addAction(undo);
  editMenu->addAction(redo);
  editMenu->addSeparator();
  editMenu->addAction(editCut);
  editMenu->addAction(editCopy);
  editMenu->addAction(editPaste);
  editMenu->addAction(editDelete);
  editMenu->addSeparator();
  editMenu->addAction(select);
  editMenu->addAction(selectAll);
  editMenu->addAction(selectMarker);
  editMenu->addAction(editFind);
  editMenu->addAction(changeProps);
  editMenu->addAction(editRotate);
  editMenu->addAction(editMirror);
  editMenu->addAction(editMirrorY);
  editMenu->addAction(editActivate);
  editMenu->addSeparator();
  editMenu->addAction(intoH);
  editMenu->addAction(popH);



  alignMenu = new QMenu(tr("P&ositioning"));  // menuBar entry alignMenu
  alignMenu->addAction(moveText);
  alignMenu->addAction(onGrid);
  alignMenu->addSeparator();
  alignMenu->addAction(centerHor);
  alignMenu->addAction(centerVert);
  alignMenu->addSeparator();
  alignMenu->addAction(alignTop);
  alignMenu->addAction(alignBottom);
  alignMenu->addAction(alignLeft);
  alignMenu->addAction(alignRight);
  alignMenu->addSeparator();
  alignMenu->addAction(distrHor);
  alignMenu->addAction(distrVert);



  insMenu = new QMenu(tr("&Insert"));  // menuBar entry insMenu
  insMenu->addAction(insWire);
  insMenu->addAction(insLabel);
  insMenu->addAction(insEquation);
  insMenu->addAction(insGround);
  insMenu->addAction(insPort);
  insMenu->addAction(setMarker);
  insMenu->addAction(insEntity);


  projMenu = new QMenu(tr("&Project"));  // menuBar entry projMenu
  projMenu->addAction(projNew);
  projMenu->addAction(projOpen);
  projMenu->addAction(addToProj);
  projMenu->addAction(projClose);
  projMenu->addAction(projDel);
  projMenu->addSeparator();
  projMenu->addAction(createLib);
  projMenu->addSeparator();
  projMenu->addAction(graph2csv);
  // TODO only enable if document is VA file
  if (QucsSettings.DefaultSimulator == spicecompat::simQucsator ||
      QucsSettings.DefaultSimulator == spicecompat::simNgspice) {
      // There is no VA-modules builder available for Ngspice etc.
      projMenu->addSeparator();
      projMenu->addAction(buildModule);
      projMenu->addAction(loadModule);
  }

  toolMenu = new QMenu(tr("&Tools"));  // menuBar entry toolMenu
  toolMenu->addAction(callEditor);
  toolMenu->addAction(callFilter);
  toolMenu->addAction(callActiveFilter);
  toolMenu->addAction(callLine);
  toolMenu->addAction(callMatch);
  toolMenu->addAction(callAtt);
  toolMenu->addAction(callPwrComb);
  toolMenu->addAction(callConverter);
  toolMenu->addAction(callRFLayout);
  toolMenu->addAction(callSPAR_Viewer);
  toolMenu->addSeparator();

  cmMenu = new QMenu(tr("Compact modelling"));
  cmMenu->addAction(buildVAModule);
  //cmMenu->addAction(buildIFS);
  toolMenu->addMenu(cmMenu);



  simMenu = new QMenu(tr("&Simulation"));  // menuBar entry simMenu
  simMenu->addAction(simulate);
  simMenu->addAction(tune);
  simMenu->addAction(dpl_sch);
  simMenu->addAction(dcbias);
  simMenu->addAction(showMsg);
  simMenu->addAction(showNet);
  simMenu->addAction(save_netlist);
  simMenu->addAction(saveCdlNetlist);
  simMenu->addAction(simSettings);


  viewMenu = new QMenu(tr("&View"));  // menuBar entry viewMenu
  viewMenu->addAction(magAll);
  viewMenu->addAction(magSel);
  viewMenu->addAction(magOne);
  viewMenu->addAction(magPlus);
  viewMenu->addAction(magMinus);
  viewMenu->addAction(setDiagramLimits);
  viewMenu->addSeparator();
  viewMenu->addAction(showGrid);
  viewMenu->addSeparator();
    //viewMenu->setCheckable(true);
  viewMenu->addAction(viewBrowseDock);
  viewMenu->addAction(viewOctaveDock);


  helpMenu = new QMenu(tr("&Help"));  // menuBar entry helpMenu
  helpMenu->addAction(helpIndex);
  //helpMenu->addAction(helpQucsIndex);
  helpMenu->addAction(helpGetStart);
  helpMenu->addSeparator();



  //Fill submenu's with filenames of PDF documents
  QDir TechnicalDir = QDir(QucsSettings.DocDir.replace('\\','/'));

  if(TechnicalDir.cd("technical"))
  {
    helpTechnical = new QMenu(tr("&Technical Papers"));
    helpMenu->addMenu(helpTechnical);
    TechnicalDir.setFilter(QDir::Files);
    QStringList entries = TechnicalDir.entryList();
    for(int i=0;i<entries.size();i++)
    {
      QAction* helpTechnicalActions = new QAction(entries[i], this);
      helpTechnicalActions->setObjectName ( entries[i] );
      helpTechnicalActions->setStatusTip(tr("Open ")+entries[i]);
      helpTechnicalActions->setWhatsThis(entries[i]+tr("\n\nOpen ")+entries[i]);
      connect(helpTechnicalActions, SIGNAL(triggered()), SLOT(slotHelpTechnical()));
      helpTechnical->addAction(helpTechnicalActions);
    }

  }

//Fill submenu's with filenames of PDF documents
  QDir ReportDir = QDir(QucsSettings.DocDir.replace('\\','/'));
  if(ReportDir.cd("report"))
  {
    helpReport = new QMenu(tr("Technical &Reports"));
    helpMenu->addMenu(helpReport);
    ReportDir.setFilter(QDir::Files);
    QStringList entries = ReportDir.entryList();
    for(int i=0;i<entries.size();i++)
    {
      QAction* helpReportActions = new QAction(entries[i], this);
      helpReportActions->setObjectName ( entries[i] );
      helpReportActions->setStatusTip(tr("Open ")+entries[i]);
      helpReportActions->setWhatsThis(entries[i]+tr("\n\nOpen ")+entries[i]);
      connect(helpReportActions, SIGNAL(triggered()), SLOT(slotHelpReport()));
      helpReport->addAction(helpReportActions);
    }
  }

//Fill submenu's with filenames of PDF documents
  QDir TutorialDir = QDir(QucsSettings.DocDir.replace('\\','/'));
  if(TutorialDir.cd("tutorial"))
  {
    helpTutorial = new QMenu(tr("T&utorials"));
    helpMenu->addMenu(helpTutorial);
    TutorialDir.setFilter(QDir::Files);
    QStringList entries = TutorialDir.entryList();
    for(int i=0;i<entries.size();i++)
    {
      QAction* helpTutorialActions = new QAction(entries[i], this);
      helpTutorialActions->setObjectName ( entries[i] );
      helpTutorialActions->setStatusTip(tr("Open ")+entries[i]);
      helpTutorialActions->setWhatsThis(entries[i]+tr("\n\nOpen ")+entries[i]);
      connect(helpTutorialActions, SIGNAL(triggered()), SLOT(slotHelpTutorial()));
      helpTutorial->addAction(helpTutorialActions);
    }
  }


  helpMenu->addSeparator();
  helpMenu->addAction(helpAboutApp);
  helpMenu->addAction(helpAboutQt);


  menuBar()->addMenu(fileMenu);
  menuBar()->addMenu(editMenu);
  menuBar()->addMenu(alignMenu);
  menuBar()->addMenu(insMenu);
  menuBar()->addMenu(projMenu);
  menuBar()->addMenu(toolMenu);
  menuBar()->addMenu(simMenu);
  menuBar()->addMenu(viewMenu);
  menuBar()->addSeparator();
  menuBar()->addMenu(helpMenu);

}

// ----------------------------------------------------------
void QucsApp::initToolBar()
{
  fileToolbar = new QToolBar(tr("File"));
  this->addToolBar(fileToolbar);
  fileToolbar->addAction(fileNew);
  fileToolbar->addAction(textNew);
  fileToolbar->addAction(symNew);
  fileToolbar->addAction(fileOpen);
  fileToolbar->addAction(fileSave);
  fileToolbar->addAction(fileSaveAll);
  fileToolbar->addAction(fileClose);
  fileToolbar->addAction(filePrint);



  editToolbar = new QToolBar(tr("Edit"));
  this->addToolBar(editToolbar);
  editToolbar->addAction(editCut);
  editToolbar->addAction(editCopy);
  editToolbar->addAction(editPaste);
  editToolbar->addAction(editDelete);
  editToolbar->addAction(undo);
  editToolbar->addAction(redo);



  viewToolbar = new QToolBar(tr("View"));
  this->addToolBar(viewToolbar);
  viewToolbar->addAction(magAll);
  viewToolbar->addAction(magSel);
  viewToolbar->addAction(magOne);
  viewToolbar->addAction(magPlus);
  viewToolbar->addAction(magMinus);


  workToolbar = new QToolBar(tr("Work"));
  this->addToolBar(workToolbar);
  workToolbar->addAction(select);
  workToolbar->addAction(editActivate);
  workToolbar->addAction(editMirror);
  workToolbar->addAction(editMirrorY);
  workToolbar->addAction(editRotate);
  workToolbar->addAction(intoH);
  workToolbar->addAction(popH);
  workToolbar->addAction(insWire);
  workToolbar->addAction(insLabel);
  workToolbar->addAction(insEquation);
  workToolbar->addAction(insGround);
  workToolbar->addAction(insPort);
  //workToolbar->addSeparator();    // <<<=======================

  simulateToolbar = new QToolBar(tr("Simulate"));
  this->addToolBar(simulateToolbar);
  simulateToolbar->addWidget(reinterpret_cast<QWidget *>(simulatorsCombobox));
  simulateToolbar->addAction(simulate);
  simulateToolbar->addAction(tune);
  simulateToolbar->addAction(dpl_sch);
  simulateToolbar->addAction(setMarker);
  simulateToolbar->addAction(setDiagramLimits);
}

// ----------------------------------------------------------
void QucsApp::initStatusBar()
{
    DiagramValuesLabel = new QLabel("", statusBar());
    statusBar()->addPermanentWidget(DiagramValuesLabel, 0);

  // To reserve enough space, insert the longest text and rewrite it afterwards.
  //SimulatorLabel = new QLabel(spicecompat::getDefaultSimulatorName(QucsSettings.DefaultSimulator));
  //statusBar()->addPermanentWidget(SimulatorLabel, 0);

  WarningLabel = new QLabel(tr("no warnings"), statusBar());
  statusBar()->addWidget(WarningLabel, 0);

  PositionLabel = new QLabel("0 : 0", statusBar());
#ifndef __APPLE__
  PositionLabel->setAlignment(Qt::AlignRight);
#endif
  statusBar()->addPermanentWidget(PositionLabel, 0);

  statusBar()->showMessage(tr("Ready."), 2000);
}

// ----------------------------------------------------------
void QucsApp::slotShowWarnings()
{
  static int ResultState = 0;

  if(ResultState == 0) {
    QFont f = WarningLabel->font();
    f.setWeight(QFont::DemiBold);
    WarningLabel->setFont(f);
    WarningLabel->setText(tr("Warnings in last simulation! Press F5"));
  }

  ResultState++;
  if(ResultState & 1)
    misc::setWidgetForegroundColor(WarningLabel,Qt::red);
  else
    misc::setWidgetForegroundColor(WarningLabel,Qt::black);

  if(ResultState < 9)
    QTimer::singleShot(500, this, SLOT(slotShowWarnings()));
  else
    ResultState = 0;
}

// ----------------------------------------------------------
void QucsApp::slotResetWarnings()
{
  QFont f = WarningLabel->font();   // reset warning label
  f.setWeight(QFont::Normal);
  WarningLabel->setFont(f);
  misc::setWidgetForegroundColor(WarningLabel,Qt::black);
  WarningLabel->setText(tr("no warnings"));
}

// ----------------------------------------------------------
void QucsApp::printCursorPosition(int x, int y, QString text)
{
  PositionLabel->setText(QString::number(x)+" : "+QString::number(y));
  PositionLabel->setMinimumWidth(PositionLabel->width());

  DiagramValuesLabel->setText(text);
}

// --------------------------------------------------------------
// called by document, update undo state
void QucsApp::slotUpdateUndo(bool isEnabled)
{
  undo->setEnabled(isEnabled);
}

// --------------------------------------------------------------
// called by document, update redo state
void QucsApp::slotUpdateRedo(bool isEnabled)
{
  redo->setEnabled(isEnabled);
}

// ----------------------------------------------------------
// turn Browse Dock Window on or off
void QucsApp::slotViewBrowseDock(bool toggle)
{
  dock->setVisible(toggle);
}

// ----------------------------------------------------------
void QucsApp::slotToggleDock(bool on)
{
  viewBrowseDock->blockSignals(true);
  viewBrowseDock->setChecked(on);
  viewBrowseDock->blockSignals(false);
}

// ----------------------------------------------------------
// turn Octave Dock Window on or off
void QucsApp::slotViewOctaveDock(bool toggle)
{
  octDock->setVisible(toggle);
  if (toggle) {
    octave->startOctave();
  }
}

// ----------------------------------------------------------
void QucsApp::slotToggleOctave(bool on)
{
  viewOctaveDock->blockSignals(true);
  viewOctaveDock->setChecked(on);
  viewOctaveDock->blockSignals(false);
}