/***************************************************************************
schematic_element.cpp
-----------------------
begin : Sat Mar 3 2006
copyright : (C) 2006 by Michael Margraf
email : michael.margraf@alumni.tu-berlin.de
***************************************************************************/
/***************************************************************************
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
***************************************************************************/
#include <stdlib.h>
#include <limits.h>
#include "portsymbol.h"
#include "schematic.h"
#include <set>
/**
Given an element bounding rectangle and selection rectangle tells
whether the element should be marked as "selected".
If \c entirely param is \c false then an element is "selected"
if its bounding rectangle intersect with selection rectangle.
Otherwise the element must lie entirely within the selection
rectangle.
*/
static bool shouldBeSelected(const QRect& elementBoundingRect, const QRect& selectionRect, bool entirely)
{
// QRect.contains() and QRect.intersects() always return false
// for empty rectangles. Thus an element with zero size can't be
// selected. To overcome this, lets treat it like a point, not
// as a rectangle (empty rectangle has all its corners in one spot)
if (elementBoundingRect.isNull()) {
return selectionRect.contains(elementBoundingRect.topLeft());
}
if (entirely) {
return selectionRect.contains(elementBoundingRect);
} else {
return selectionRect.intersects(elementBoundingRect);
}
}
/* *******************************************************************
***** *****
***** Actions handling the nodes *****
***** *****
******************************************************************* */
// Inserts a port into the schematic and connects it to another node if
// the coordinates are identical. The node is returned.
Node* Schematic::insertNode(int x, int y, Element *e)
{
Node *pn;
// check if new node lies upon existing node
for(pn = a_Nodes->first(); pn != 0; pn = a_Nodes->next()) // check every node
if(pn->cx == x) if(pn->cy == y)
{
pn->connect(e);
break;
}
if(pn == 0) // create new node, if no existing one lies at this position
{
pn = new Node(x, y);
a_Nodes->append(pn);
pn->connect(e); // connect schematic node to component node
}
else return pn; // return, if node is not new
// check if the new node lies upon an existing wire
for(Wire *pw = a_Wires->first(); pw != 0; pw = a_Wires->next())
{
if(pw->x1 == x)
{
if(pw->y1 > y) continue;
if(pw->y2 < y) continue;
}
else if(pw->y1 == y)
{
if(pw->x1 > x) continue;
if(pw->x2 < x) continue;
}
else continue;
// split the wire into two wires
splitWire(pw, pn);
return pn;
}
return pn;
}
// ---------------------------------------------------
Node* Schematic::selectedNode(int x, int y)
{
for(Node *pn = a_Nodes->first(); pn != 0; pn = a_Nodes->next()) // test nodes
if(pn->getSelected(x, y))
return pn;
return 0;
}
/* *******************************************************************
***** *****
***** Actions handling the wires *****
***** *****
******************************************************************* */
// Inserts a port into the schematic and connects it to another node if the
// coordinates are identical. If 0 is returned, no new wire is inserted.
// If 2 is returned, the wire line ended.
int Schematic::insertWireNode1(Wire *w)
{
Node *pn;
// check if new node lies upon an existing node
for(pn = a_Nodes->first(); pn != 0; pn = a_Nodes->next()) // check every node
if(pn->cx == w->x1) if(pn->cy == w->y1) break;
if(pn != 0)
{
pn->connect(w);
w->Port1 = pn;
return 2; // node is not new
}
// check if the new node lies upon an existing wire
for(Wire *ptr2 = a_Wires->first(); ptr2 != 0; ptr2 = a_Wires->next())
{
if(ptr2->x1 == w->x1)
{
if(ptr2->y1 > w->y1) continue;
if(ptr2->y2 < w->y1) continue;
if(ptr2->isHorizontal() == w->isHorizontal()) // ptr2-wire is vertical
{
if(ptr2->y2 >= w->y2)
{
delete w; // new wire lies within an existing wire
return 0;
}
else
{
// one part of the wire lies within an existing wire
// the other part not
if(ptr2->Port2->conn_count() == 1)
{
w->y1 = ptr2->y1;
w->Port1 = ptr2->Port1;
if(ptr2->Label)
{
w->Label = ptr2->Label;
w->Label->pOwner = w;
}
ptr2->Port1->disconnect(ptr2); // two -> one wire
ptr2->Port1->connect(w);
a_Nodes->removeRef(ptr2->Port2);
a_Wires->removeRef(ptr2);
return 2;
}
else
{
w->y1 = ptr2->y2;
w->Port1 = ptr2->Port2;
ptr2->Port2->connect(w); // shorten new wire
return 2;
}
}
}
}
else if(ptr2->y1 == w->y1)
{
if(ptr2->x1 > w->x1) continue;
if(ptr2->x2 < w->x1) continue;
if(ptr2->isHorizontal() == w->isHorizontal()) // ptr2-wire is horizontal
{
if(ptr2->x2 >= w->x2)
{
delete w; // new wire lies within an existing wire
return 0;
}
else
{
// one part of the wire lies within an existing wire
// the other part not
if(ptr2->Port2->conn_count() == 1)
{
w->x1 = ptr2->x1;
w->Port1 = ptr2->Port1;
if(ptr2->Label)
{
w->Label = ptr2->Label;
w->Label->pOwner = w;
}
ptr2->Port1->disconnect(ptr2); // two -> one wire
ptr2->Port1->connect(w);
a_Nodes->removeRef(ptr2->Port2);
a_Wires->removeRef(ptr2);
return 2;
}
else
{
w->x1 = ptr2->x2;
w->Port1 = ptr2->Port2;
ptr2->Port2->connect(w); // shorten new wire
return 2;
}
}
}
}
else continue;
pn = new Node(w->x1, w->y1); // create new node
a_Nodes->append(pn);
pn->connect(w); // connect schematic node to the new wire
w->Port1 = pn;
// split the wire into two wires
splitWire(ptr2, pn);
return 2;
}
pn = new Node(w->x1, w->y1); // create new node
a_Nodes->append(pn);
pn->connect(w); // connect schematic node to the new wire
w->Port1 = pn;
return 1;
}
// ---------------------------------------------------
// if possible, connect two horizontal wires to one
bool Schematic::connectHWires1(Wire *w)
{
Wire *pw;
Node *n = w->Port1;
for (auto* connected : *n) {
if (connected == w || connected->Type != isWire) {
continue;
}
pw = dynamic_cast<Wire*>(connected);
if (!pw->isHorizontal()) {
continue;
}
if(pw->x1 < w->x1)
{
if(n->conn_count() != 2) continue;
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
else if(n->Label)
{
w->Label = n->Label;
w->Label->pOwner = w;
w->Label->Type = isHWireLabel;
}
w->x1 = pw->x1;
w->Port1 = pw->Port1; // new wire lengthens an existing one
a_Nodes->removeRef(n);
w->Port1->disconnect(pw);
w->Port1->connect(w);
a_Wires->removeRef(pw);
return true;
}
if(pw->x2 >= w->x2) // new wire lies within an existing one ?
{
w->Port1->disconnect(w); // second node not yet made
delete w;
return false;
}
if(pw->Port2->conn_count() < 2)
{
// existing wire lies within the new one
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
pw->Port1->disconnect(pw);
a_Nodes->removeRef(pw->Port2);
a_Wires->removeRef(pw);
return true;
}
w->x1 = pw->x2; // shorten new wire according to an existing one
w->Port1->disconnect(w);
w->Port1 = pw->Port2;
w->Port1->connect(w);
return true;
}
return true;
}
// ---------------------------------------------------
// if possible, connect two vertical wires to one
bool Schematic::connectVWires1(Wire *w)
{
Wire *pw;
Node *n = w->Port1;
for (auto* connected : *n) {
if (connected == w || connected->Type != isWire) {
continue;
}
pw = dynamic_cast<Wire*>(connected);
if (pw->isHorizontal()) {
continue;
}
if(pw->y1 < w->y1)
{
if(n->conn_count() != 2) continue;
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
else if(n->Label)
{
w->Label = n->Label;
w->Label->pOwner = w;
w->Label->Type = isVWireLabel;
}
w->y1 = pw->y1;
w->Port1 = pw->Port1; // new wire lengthens an existing one
a_Nodes->removeRef(n);
w->Port1->disconnect(pw);
w->Port1->connect(w);
a_Wires->removeRef(pw);
return true;
}
if(pw->y2 >= w->y2) // new wire lies complete within an existing one ?
{
w->Port1->disconnect(w); // second node not yet made
delete w;
return false;
}
if(pw->Port2->conn_count() < 2)
{
// existing wire lies within the new one
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
pw->Port1->disconnect(pw);
a_Nodes->removeRef(pw->Port2);
a_Wires->removeRef(pw);
return true;
}
w->y1 = pw->y2; // shorten new wire according to an existing one
w->Port1->disconnect(w);
w->Port1 = pw->Port2;
w->Port1->connect(w);
return true;
}
return true;
}
// ---------------------------------------------------
// Inserts a port into the schematic and connects it to another node if the
// coordinates are identical. If 0 is returned, no new wire is inserted.
// If 2 is returned, the wire line ended.
int Schematic::insertWireNode2(Wire *w)
{
Node *pn;
// check if new node lies upon an existing node
for(pn = a_Nodes->first(); pn != 0; pn = a_Nodes->next()) // check every node
if(pn->cx == w->x2) if(pn->cy == w->y2) break;
if(pn != 0)
{
pn->connect(w);
w->Port2 = pn;
return 2; // node is not new
}
// check if the new node lies upon an existing wire
for(Wire *ptr2 = a_Wires->first(); ptr2 != 0; ptr2 = a_Wires->next())
{
if(ptr2->x1 == w->x2)
{
if(ptr2->y1 > w->y2) continue;
if(ptr2->y2 < w->y2) continue;
// (if new wire lies within an existing wire, was already check before)
if(ptr2->isHorizontal() == w->isHorizontal()) // ptr2-wire is vertical
{
// one part of the wire lies within an existing wire
// the other part not
if(ptr2->Port1->conn_count() == 1)
{
if(ptr2->Label)
{
w->Label = ptr2->Label;
w->Label->pOwner = w;
}
w->y2 = ptr2->y2;
w->Port2 = ptr2->Port2;
ptr2->Port2->disconnect(ptr2); // two -> one wire
ptr2->Port2->connect(w);
a_Nodes->removeRef(ptr2->Port1);
a_Wires->removeRef(ptr2);
return 2;
}
else
{
w->y2 = ptr2->y1;
w->Port2 = ptr2->Port1;
ptr2->Port1->connect(w); // shorten new wire
return 2;
}
}
}
else if(ptr2->y1 == w->y2)
{
if(ptr2->x1 > w->x2) continue;
if(ptr2->x2 < w->x2) continue;
// (if new wire lies within an existing wire, was already check before)
if(ptr2->isHorizontal() == w->isHorizontal()) // ptr2-wire is horizontal
{
// one part of the wire lies within an existing wire
// the other part not
if(ptr2->Port1->conn_count() == 1)
{
if(ptr2->Label)
{
w->Label = ptr2->Label;
w->Label->pOwner = w;
}
w->x2 = ptr2->x2;
w->Port2 = ptr2->Port2;
ptr2->Port2->disconnect(ptr2); // two -> one wire
ptr2->Port2->connect(w);
a_Nodes->removeRef(ptr2->Port1);
a_Wires->removeRef(ptr2);
return 2;
}
else
{
w->x2 = ptr2->x1;
w->Port2 = ptr2->Port1;
ptr2->Port1->connect(w); // shorten new wire
return 2;
}
}
}
else continue;
pn = new Node(w->x2, w->y2); // create new node
a_Nodes->append(pn);
pn->connect(w); // connect schematic node to the new wire
w->Port2 = pn;
// split the wire into two wires
splitWire(ptr2, pn);
return 2;
}
pn = new Node(w->x2, w->y2); // create new node
a_Nodes->append(pn);
pn->connect(w); // connect schematic node to the new wire
w->Port2 = pn;
return 1;
}
// ---------------------------------------------------
// if possible, connect two horizontal wires to one
bool Schematic::connectHWires2(Wire *w)
{
Wire *pw;
Node *n = w->Port2;
for (auto* connected : *n) {
if (connected == w || connected->Type != isWire) {
continue;
}
pw = dynamic_cast<Wire*>(connected);
if (!pw->isHorizontal()) {
continue;
}
if(pw->x2 > w->x2)
{
if(n->conn_count() != 2) continue;
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
w->x2 = pw->x2;
w->Port2 = pw->Port2; // new wire lengthens an existing one
a_Nodes->removeRef(n);
w->Port2->disconnect(pw);
w->Port2->connect(w);
a_Wires->removeRef(pw);
return true;
}
// (if new wire lies complete within an existing one, was already
// checked before)
if(pw->Port1->conn_count() < 2)
{
// existing wire lies within the new one
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
pw->Port2->disconnect(pw);
a_Nodes->removeRef(pw->Port1);
a_Wires->removeRef(pw);
return true;
}
w->x2 = pw->x1; // shorten new wire according to an existing one
w->Port2->disconnect(w);
w->Port2 = pw->Port1;
w->Port2->connect(w);
return true;
}
return true;
}
// ---------------------------------------------------
// if possible, connect two vertical wires to one
bool Schematic::connectVWires2(Wire *w)
{
Wire *pw;
Node *n = w->Port2;
for (auto* connected : *n) {
if (connected == w || connected->Type != isWire) {
continue;
}
pw = dynamic_cast<Wire*>(connected);
if (pw->isHorizontal()) {
continue;
}
if(pw->y2 > w->y2)
{
if(n->conn_count() != 2) continue;
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
w->y2 = pw->y2;
w->Port2 = pw->Port2; // new wire lengthens an existing one
a_Nodes->removeRef(n);
w->Port2->disconnect(pw);
w->Port2->connect(w);
a_Wires->removeRef(pw);
return true;
}
// (if new wire lies complete within an existing one, was already
// checked before)
if(pw->Port1->conn_count() < 2)
{
// existing wire lies within the new one
if(pw->Label)
{
w->Label = pw->Label;
w->Label->pOwner = w;
}
pw->Port2->disconnect(pw);
a_Nodes->removeRef(pw->Port1);
a_Wires->removeRef(pw);
return true;
}
w->y2 = pw->y1; // shorten new wire according to an existing one
w->Port2->disconnect(w);
w->Port2 = pw->Port1;
w->Port2->connect(w);
return true;
}
return true;
}
// ---------------------------------------------------
// Inserts a vertical or horizontal wire into the schematic and connects
// the ports that hit together. Returns whether the beginning and ending
// (the ports of the wire) are connected or not.
int Schematic::insertWire(Wire *w)
{
int tmp, con = 0;
bool ok;
// change coordinates if necessary (port 1 coordinates must be less
// port 2 coordinates)
if(w->x1 > w->x2)
{
tmp = w->x1;
w->x1 = w->x2;
w->x2 = tmp;
}
else if(w->y1 > w->y2)
{
tmp = w->y1;
w->y1 = w->y2;
w->y2 = tmp;
}
else con = 0x100;
tmp = insertWireNode1(w);
if(tmp == 0) return 3; // no new wire and no open connection
if(tmp > 1) con |= 2; // insert node and remember if it remains open
if(w->isHorizontal()) ok = connectHWires1(w);
else ok = connectVWires1(w);
if(!ok) return 3;
tmp = insertWireNode2(w);
if(tmp == 0) return 3; // no new wire and no open connection
if(tmp > 1) con |= 1; // insert node and remember if it remains open
if(w->isHorizontal()) ok = connectHWires2(w);
else ok = connectVWires2(w);
if(!ok) return 3;
// change node 1 and 2
if(con > 255) con = ((con >> 1) & 1) | ((con << 1) & 2);
a_Wires->append(w); // add wire to the schematic
int n1, n2;
Wire *pw, *nw;
Node *pn, *pn2;
// ................................................................
// Check if the new line covers existing nodes.
// In order to also check new appearing wires -> use "for"-loop
for(pw = a_Wires->current(); pw != 0; pw = a_Wires->next())
for(pn = a_Nodes->first(); pn != 0; ) // check every node
{
if(pn->cx == pw->x1)
{
if(pn->cy <= pw->y1)
{
pn = a_Nodes->next();
continue;
}
if(pn->cy >= pw->y2)
{
pn = a_Nodes->next();
continue;
}
}
else if(pn->cy == pw->y1)
{
if(pn->cx <= pw->x1)
{
pn = a_Nodes->next();
continue;
}
if(pn->cx >= pw->x2)
{
pn = a_Nodes->next();
continue;
}
}
else
{
pn = a_Nodes->next();
continue;
}
n1 = 2;
n2 = 3;
pn2 = pn;
// check all connections of the current node
for(auto* pe : *pn)
{
if(pe->Type != isWire) continue;
nw = (Wire*)pe;
// wire lies within the new ?
if(pw->isHorizontal() != nw->isHorizontal()) continue;
pn = nw->Port1;
pn2 = nw->Port2;
n1 = pn->conn_count();
n2 = pn2->conn_count();
if(n1 == 1)
{
a_Nodes->removeRef(pn); // delete node 1 if open
pn2->disconnect(nw); // remove connection
pn = pn2;
}
if(n2 == 1)
{
pn->disconnect(nw); // remove connection
a_Nodes->removeRef(pn2); // delete node 2 if open
pn2 = pn;
}
if(pn == pn2)
{
if(nw->Label)
{
pw->Label = nw->Label;
pw->Label->pOwner = pw;
}
a_Wires->removeRef(nw); // delete wire
a_Wires->findRef(pw); // set back to current wire
}
break;
}
if(n1 == 1) if(n2 == 1) continue;
// split wire into two wires
if((pw->x1 != pn->cx) || (pw->y1 != pn->cy))
{
nw = new Wire(pw->x1, pw->y1, pn->cx, pn->cy, pw->Port1, pn);
pn->connect(nw);
a_Wires->append(nw);
a_Wires->findRef(pw);
pw->Port1->connect(nw);
}
pw->Port1->disconnect(pw);
pw->x1 = pn2->cx;
pw->y1 = pn2->cy;
pw->Port1 = pn2;
pn2->connect(pw);
pn = a_Nodes->next();
}
if (a_Wires->containsRef (w)) // if two wire lines with different labels ...
oneLabel(w->Port1); // ... are connected, delete one label
return con | 0x0200; // sent also end flag
}
// ---------------------------------------------------
// Follows a wire line and selects it.
void Schematic::selectWireLine(Element *pe, Node *pn, bool ctrl)
{
Node *pn_1st = pn;
while(pn->conn_count() == 2)
{
pe = pn->other_than(pe);
if(pe->Type != isWire) break;
if(ctrl) pe->isSelected ^= ctrl;
else pe->isSelected = true;
if(((Wire*)pe)->Port1 == pn) pn = ((Wire*)pe)->Port2;
else pn = ((Wire*)pe)->Port1;
if(pn == pn_1st) break; // avoid endless loop in wire loops
}
}
// ---------------------------------------------------
Wire* Schematic::selectedWire(int x, int y)
{
for(Wire *pw = a_Wires->first(); pw != 0; pw = a_Wires->next())
if(pw->getSelected(x, y))
return pw;
return 0;
}
// ---------------------------------------------------
// Splits the wire "*pw" into two pieces by the node "*pn".
Wire* Schematic::splitWire(Wire *pw, Node *pn)
{
Wire *newWire = new Wire(pn->cx, pn->cy, pw->x2, pw->y2, pn, pw->Port2);
newWire->isSelected = pw->isSelected;
pw->x2 = pn->cx;
pw->y2 = pn->cy;
pw->Port2 = pn;
newWire->Port2->connect(newWire);
pn->connect(pw);
pn->connect(newWire);
newWire->Port2->disconnect(pw);
a_Wires->append(newWire);
if(pw->Label)
if((pw->Label->cx > pn->cx) || (pw->Label->cy > pn->cy))
{
newWire->Label = pw->Label; // label goes to the new wire
pw->Label = 0;
newWire->Label->pOwner = newWire;
}
return newWire;
}
// ---------------------------------------------------
// If possible, make one wire out of two wires.
bool Schematic::oneTwoWires(Node *n)
{
Wire *e3;
Wire *e1 = (Wire*)n->any(); // two wires -> one wire
Wire *e2 = (Wire*)n->other_than(e1);
if(e1->Type == isWire) if(e2->Type == isWire)
if(e1->isHorizontal() == e2->isHorizontal())
{
if(e1->x1 == e2->x2) if(e1->y1 == e2->y2)
{
e3 = e1;
e1 = e2;
e2 = e3; // e1 must have lesser coordinates
}
if(e2->Label) // take over the node name label ?
{
e1->Label = e2->Label;
e1->Label->pOwner = e1;
}
else if(n->Label)
{
e1->Label = n->Label;
e1->Label->pOwner = e1;
if(e1->isHorizontal())
e1->Label->Type = isHWireLabel;
else
e1->Label->Type = isVWireLabel;
}
e1->x2 = e2->x2;
e1->y2 = e2->y2;
e1->Port2 = e2->Port2;
a_Nodes->removeRef(n); // delete node (is auto delete)
e1->Port2->disconnect(e2);
e1->Port2->connect(e1);
a_Wires->removeRef(e2);
return true;
}
return false;
}
// ---------------------------------------------------
// Deletes the wire 'w'.
void Schematic::deleteWire(Wire *w)
{
if(w->Port1->conn_count() == 1)
{
if(w->Port1->Label) delete w->Port1->Label;
a_Nodes->removeRef(w->Port1); // delete node 1 if open
}
else
{
w->Port1->disconnect(w); // remove connection
if(w->Port1->conn_count() == 2)
oneTwoWires(w->Port1); // two wires -> one wire
}
if(w->Port2->conn_count() == 1)
{
if(w->Port2->Label) delete w->Port2->Label;
a_Nodes->removeRef(w->Port2); // delete node 2 if open
}
else
{
w->Port2->disconnect(w); // remove connection
if(w->Port2->conn_count() == 2)
oneTwoWires(w->Port2); // two wires -> one wire
}
if(w->Label)
{
delete w->Label;
w->Label = 0;
}
a_Wires->removeRef(w);
}
// ---------------------------------------------------
int Schematic::copyWires(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
int count=0;
Node *pn;
Wire *pw;
WireLabel *pl;
for(pw = a_Wires->first(); pw != 0; ) // find bounds of all selected wires
if(pw->isSelected)
{
if(pw->x1 < x1) x1 = pw->x1;
if(pw->x2 > x2) x2 = pw->x2;
if(pw->y1 < y1) y1 = pw->y1;
if(pw->y2 > y2) y2 = pw->y2;
count++;
ElementCache->append(pw);
// rescue non-selected node labels
pn = pw->Port1;
if(pn->Label)
if(pn->conn_count() < 2)
{
ElementCache->append(pn->Label);
// Don't set pn->Label->pOwner=0 , so text position stays unchanged.
// But remember its wire.
pn->Label->pOwner = (Node*)pw;
pn->Label = 0;
}
pn = pw->Port2;
if(pn->Label)
if(pn->conn_count() < 2)
{
ElementCache->append(pn->Label);
// Don't set pn->Label->pOwner=0 , so text position stays unchanged.
// But remember its wire.
pn->Label->pOwner = (Node*)pw;
pn->Label = 0;
}
pl = pw->Label;
pw->Label = 0;
deleteWire(pw);
pw->Label = pl; // restore wire label
pw = a_Wires->current();
}
else pw = a_Wires->next();
return count;
}
/* *******************************************************************
***** *****
***** Actions with markers *****
***** *****
******************************************************************* */
Marker* Schematic::setMarker(int x, int y)
{
// only diagrams ...
for(Diagram *pd = a_Diagrams->last(); pd != 0; pd = a_Diagrams->prev()){
if(Marker* m=pd->setMarker(x,y)){
setChanged(true, true);
return m;
}
}
return NULL;
}
// ---------------------------------------------------
// Moves the marker pointer left/right on the graph.
void Schematic::markerLeftRight(bool left, QList<Element*> *Elements)
{
bool acted = false;
for (auto* e : *Elements) {
if (auto* pm = dynamic_cast<Marker*>(e)) {
if (pm->moveLeftRight(left))
acted = true;
}
}
if(acted) setChanged(true, true, 'm');
}
// ---------------------------------------------------
// Moves the marker pointer up/down on the more-dimensional graph.
void Schematic::markerUpDown(bool up, QList<Element*> *Elements)
{
bool acted = false;
for (auto* e : *Elements) {
if (auto* pm = dynamic_cast<Marker*>(e)) {
if (pm->moveUpDown(up))
acted = true;
}
}
if(acted) setChanged(true, true, 'm');
}
/* *******************************************************************
***** *****
***** Actions with all elements *****
***** *****
******************************************************************* */
/* Selects the element that contains the coordinates x/y.
Returns the pointer to the element.
If 'flag' is true, the element can be deselected. If
'flag' is false the element cannot be deselected. The
purpose of this is to prevent deselection in cases such
as right-clicking on a selected element to get a context
menu.
*/
Element* Schematic::selectElement(float fX, float fY, bool flag, int *index)
{
int n, x = int(fX), y = int(fY);
Element *pe_1st = 0;
Element *pe_sel = 0;
WireLabel *pl = 0;
// test all nodes and their labels
for(Node *pn = a_Nodes->last(); pn != 0; pn = a_Nodes->prev())
{
if(!flag)
{
// The element cannot be deselected
if(index)
{
// 'index' is only true if called from MouseActions::MPressSelect()
if(pn->getSelected(x, y))
{
// Return the node pointer, as the selection cannot change
return pn;
}
}
}
pl = pn->Label; // Get any wire label associated with the Node
if(pl)
{
if(pl->getSelected(x, y))
{
if(flag)
{
// The element can be deselected, so toggle its isSelected member
// TODO: I don't see a need for the xor here, a simple ! on the current value
// would be clearer and have the same effect?
pl->isSelected ^= flag;
return pl;
}
if(pe_sel)
{
// There is another currently
pe_sel->isSelected = false;
return pl;
}
if(pe_1st == 0)
{
// give access to elements lying beneath by storing this label.
// If no label pointer (or other element) has previously been
// stored, the current label pointer is stored here.
// pe_1st is returned if no other selected element
pe_1st = pl;
}
if(pl->isSelected)
{
// if current label is already selected, store a pointer to it.
// This can be used to cycle through
pe_sel = pl;
}
}
}
}
// test all wires and wire labels
for(Wire *pw = a_Wires->last(); pw != 0; pw = a_Wires->prev())
{
if(pw->getSelected(x, y))
{
if(flag)
{
// The element can be deselected
pw->isSelected ^= flag;
return pw;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pw;
}
if(pe_1st == 0)
{
pe_1st = pw; // give access to elements lying beneath
}
if(pw->isSelected)
{
pe_sel = pw;
}
}
pl = pw->Label; // test any label associated with the wire
if(pl)
{
if(pl->getSelected(x, y))
{
if(flag)
{
// The element can be deselected
pl->isSelected ^= flag;
return pl;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pl;
}
if(pe_1st == 0)
{
// give access to elements lying beneath
pe_1st = pl;
}
if(pl->isSelected)
{
pe_sel = pl;
}
}
}
}
// test all components
for(Component *pc = a_Components->last(); pc != 0; pc = a_Components->prev())
{
if(pc->getSelected(x, y))
{
if(flag)
{
// The element can be deselected
pc->isSelected ^= flag;
return pc;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pc;
}
if(pe_1st == 0)
{
pe_1st = pc;
} // give access to elements lying beneath
if(pc->isSelected)
{
pe_sel = pc;
}
}
else
{
n = pc->getTextSelected(x, y);
if(n >= 0) // was property text clicked ?
{
pc->Type = isComponentText;
if(index) *index = n;
return pc;
}
}
}
const double Corr = 5.0 / a_Scale; // size of line select and area for resizing
// test all diagrams
for(Diagram *pd = a_Diagrams->last(); pd != 0; pd = a_Diagrams->prev())
{
for (Graph *pg : pd->Graphs)
{
// test markers of graphs
for (Marker *pm : pg->Markers)
{
if(pm->getSelected(x-pd->cx, y-pd->cy))
{
if(flag)
{
// The element can be deselected
pm->isSelected ^= flag;
return pm;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pm;
}
if(pe_1st == 0)
{
pe_1st = pm; // give access to elements beneath
}
if(pm->isSelected)
{
pe_sel = pm;
}
}
}
}
// resize area clicked ?
if(pd->isSelected)
{
if(pd->resizeTouched(fX, fY, Corr))
{
if(pe_1st == 0)
{
pd->Type = isDiagramResize;
return pd;
}
}
}
if(pd->getSelected(x, y))
{
if(pd->Name[0] == 'T') // tabular, timing diagram or truth table ?
{
if(pd->Name[1] == 'i')
{
if(y > pd->cy)
{
if(x < pd->cx+pd->xAxis.numGraphs) continue;
pd->Type = isDiagramHScroll;
return pd;
}
}
else
{
if(x < pd->cx) // clicked on scroll bar ?
{
pd->Type = isDiagramVScroll;
return pd;
}
}
}
// test graphs of diagram
for (Graph *pg : pd->Graphs)
{
if(pg->getSelected(x-pd->cx, pd->cy-y) >= 0)
{
if(flag)
{
// The element can be deselected
pg->isSelected ^= flag;
return pg;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pg;
}
if(pe_1st == 0)
{
pe_1st = pg; // access to elements lying beneath
}
if(pg->isSelected)
{
pe_sel = pg;
}
}
}
if(flag)
{
// The element can be deselected
pd->isSelected ^= flag;
return pd;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pd;
}
if(pe_1st == 0)
{
pe_1st = pd; // give access to elements lying beneath
}
if(pd->isSelected)
{
pe_sel = pd;
}
}
}
// test all paintings
for(Painting *pp = a_Paintings->last(); pp != 0; pp = a_Paintings->prev())
{
if(pp->isSelected)
{
if(pp->resizeTouched(fX, fY, Corr))
{
if(pe_1st == 0)
{
pp->Type = isPaintingResize;
return pp;
}
}
}
if(pp->getSelected(fX, fY, Corr))
{
if(flag)
{
// The element can be deselected
pp->isSelected ^= flag;
return pp;
}
if(pe_sel)
{
pe_sel->isSelected = false;
return pp;
}
if(pe_1st == 0)
{
pe_1st = pp; // give access to elements lying beneath
}
if(pp->isSelected)
{
pe_sel = pp;
}
}
}
return pe_1st;
}
void Schematic::highlightWireLabels ()
{
WireLabel *pltestinner = 0;
WireLabel *pltestouter = 0;
// First set highlighting for all wire and nodes labels to false
for(Wire *pwouter = a_Wires->last(); pwouter != 0; pwouter = a_Wires->prev())
{
pltestouter = pwouter->Label; // test any label associated with the wire
if (pltestouter)
{
pltestouter->setHighlighted (false);
}
}
for(Node *pnouter = a_Nodes->last(); pnouter != 0; pnouter = a_Nodes->prev())
{
pltestouter = pnouter->Label; // test any label associated with the node
if (pltestouter)
{
pltestouter->setHighlighted (false);
}
}
// Then test every wire's label to see if we need to highlight it
// and matching labels on wires and nodes
Q3PtrListIterator<Wire> itwouter(*a_Wires);
Wire *pwouter;
while ((pwouter = itwouter.current()) != 0)
{
++itwouter;
// get any label associated with the wire
pltestouter = pwouter->Label;
if (pltestouter)
{
if (pltestouter->isSelected)
{
bool hiLightOuter = false;
// Search for matching labels on wires
Q3PtrListIterator<Wire> itwinner(*a_Wires);
Wire *pwinner;
while ((pwinner = itwinner.current()) != 0)
{
++itwinner;
pltestinner = pwinner->Label; // test any label associated with the wire
if (pltestinner)
{
// Highlight the label if it has the same name as the selected label
// if only one wire has this label, do not highlight it
if (pltestinner != pltestouter)
{
if (pltestouter->Name == pltestinner->Name)
{
pltestinner->setHighlighted (true);
hiLightOuter = true;
}
}
}
}
// Search for matching labels on nodes
Q3PtrListIterator<Node> itninner(*a_Nodes);
Node *pninner;
while ((pninner = itninner.current()) != 0)
{
++itninner;
pltestinner = pninner->Label; // test any label associated with the node
if (pltestinner)
{
if (pltestouter->Name == pltestinner->Name)
{
// node label matches wire label
pltestinner->setHighlighted (true);
hiLightOuter = true;
}
}
}
// highlight if at least two different wires/nodes with the same label found
pltestouter->setHighlighted (hiLightOuter);
}
}
}
// Same as above but for nodes labels:
// test every node label to see if we need to highlight it
// and matching labels on wires and nodes
Q3PtrListIterator<Node> itnouter(*a_Nodes);
Node *pnouter;
while ((pnouter = itnouter.current()) != 0)
{
++itnouter;
// get any label associated with the node
pltestouter = pnouter->Label;
if (pltestouter)
{
if (pltestouter->isSelected)
{
bool hiLightOuter = false;
// Search for matching labels on wires
Q3PtrListIterator<Wire> itwinner(*a_Wires);
Wire *pwinner;
while ((pwinner = itwinner.current()) != 0)
{
++itwinner;
pltestinner = pwinner->Label; // test any label associated with the wire
if (pltestinner)
{
if (pltestouter->Name == pltestinner->Name)
{
// wire label matches node label
pltestinner->setHighlighted (true);
hiLightOuter = true;
}
}
}
// Search for matching labels on nodes
Q3PtrListIterator<Node> itninner(*a_Nodes);
Node *pninner;
while ((pninner = itninner.current()) != 0)
{
++itninner;
pltestinner = pninner->Label; // test any label associated with the node
if (pltestinner)
{
// Highlight the label if it has the same name as the selected label
// if only one node has this label, do not highlight it
if (pltestinner != pltestouter)
{
if (pltestouter->Name == pltestinner->Name)
{
pltestinner->setHighlighted (true);
hiLightOuter = true;
}
}
}
}
// highlight if at least two different wires/nodes with the same label found
pltestouter->setHighlighted (hiLightOuter);
}
}
}
}
// ---------------------------------------------------
// Deselects all elements except 'e'.
void Schematic::deselectElements(Element *e) const
{
Selection selection = currentSelection();
auto deselector = [e](auto* elem) { elem->isSelected = elem == e; };
std::for_each(selection.components.begin(), selection.components.end(), deselector);
std::for_each(selection.wires.begin(), selection.wires.end(), deselector);
std::for_each(selection.paintings.begin(), selection.paintings.end(), deselector);
std::for_each(selection.diagrams.begin(), selection.diagrams.end(), deselector);
std::for_each(selection.labels.begin(), selection.labels.end(), deselector);
std::for_each(selection.markers.begin(), selection.markers.end(), deselector);
for(auto* pd : *a_Diagrams) {
std::for_each(pd->Graphs.begin(), pd->Graphs.end(), deselector);
}
}
// Selects elements that lie within or intersect with the rectangle selectionRect
int Schematic::selectElements(const QRect& selection_rect, bool append, bool entirely) const {
int selected_count = 0;
int left, top, right, bottom;
auto select_element = [=](Element* e, const QRect& ebr) {
// If an element lies within selection rect, it must be selected regardless of any
// conditions
if (shouldBeSelected(ebr, selection_rect, entirely)) {
e->isSelected = true;
}
// If an element is not within selection rectangle, but it is already selected and we're
// not appending to a list of selected items, then the element must be deselected.
else if (e->isSelected && !append) {
e->isSelected = false;
}
return e->isSelected;
};
for (Component *component : *a_Components) {
component->Bounding(left, top, right, bottom);
if (select_element(component, QRect{left, top, right - left, bottom - top})) {
selected_count++;
}
}
for (Wire* wire : *a_Wires)
{
if (select_element(wire, QRect{wire->x1, wire->y1, wire->x2 - wire->x1, wire->y2 - wire->y1})) {
selected_count++;
}
}
WireLabel *label = nullptr;
for (Wire* wire : *a_Wires) {
if (wire->Label) {
label = wire->Label;
label->getLabelBounding(left,top,right,bottom);
if (select_element(label, QRect{left, top, right - left, bottom - top})) {
selected_count++;
}
}
}
for (Node *node : *a_Nodes) {
label = node->Label;
if (label) {
label->getLabelBounding(left,top,right,bottom);
if (select_element(label, QRect{left, top, right - left, bottom - top})) {
selected_count++;
}
}
}
for (Diagram *diagram : *a_Diagrams) {
for (Graph *graph: diagram->Graphs) {
if (graph->isSelected &= append) {
selected_count++;
}
for (Marker *marker: graph->Markers) {
marker->Bounding(left, top, right, bottom);
if (select_element(marker, QRect{left, top, right - left, bottom - top})) {
selected_count++;
}
}
}
diagram->Bounding(left, top, right, bottom);
if (select_element(diagram, QRect{left, top, right - left, bottom - top})) {
selected_count++;
}
}
for (Painting *painting : *a_Paintings) {
painting->Bounding(left, top, right, bottom);
if (select_element(painting, QRect{left, top, right - left, bottom - top})) {
selected_count++;
}
}
return selected_count;
}
// ---------------------------------------------------
// Selects all markers.
void Schematic::selectMarkers() const
{
for(Diagram *pd = a_Diagrams->first(); pd != 0; pd = a_Diagrams->next())
for (Graph *pg : pd->Graphs)
for (Marker *pm : pg->Markers)
pm->isSelected = true;
}
// ---------------------------------------------------
// For moving elements: If the moving element is connected to a not
// moving element, insert two wires. If the connected element is already
// a wire, use this wire. Otherwise create new wire.
void Schematic::newMovingWires(Q3PtrList<Element> *p, Node *pn, int pos) const
{
Element *pe;
if(pn->State & 8) // Were new wires already inserted ?
return;
pn->State |= 8;
for (;;)
{
if(pn->State & 16) // node was already worked on
break;
if (pn->conn_count() == 0) {
return;
}
if(pn->conn_count() > 1) {
break;
}
pe = pn->any();
if(pe->Type != isWire) // is it connected to exactly one wire ?
break;
// .................................................
long mask = 1, invMask = 3;
Wire *pw2=nullptr, *pw = (Wire*)pe;
Node *pn2 = pw->Port1;
if(pn2 == pn) pn2 = pw->Port2;
if(pn2->conn_count() == 2) // two existing wires connected ?
if((pn2->State & (8+4)) == 0)
{
Element *pe2 = pn2->other_than(pe);
// connected wire connected to exactly one wire ?
if(pe2->Type == isWire)
pw2 = (Wire*)pe2;
}
// .................................................
// reuse one wire
p->insert(pos, pw);
pw->Port1->disconnect(pw); // remove connection 1
pw->Port1->State |= 16+4;
pw->Port2->disconnect(pw); // remove connection 2
pw->Port2->State |= 16+4;
a_Wires->take(a_Wires->findRef(pw));
if(pw->isHorizontal()) mask = 2;
if(pw2 == nullptr) // place new wire between component and old wire
{
pn = pn2;
mask ^= 3;
invMask = 0;
}
if(pw->Port1 != pn)
{
pw->Port1->State |= mask;
pw->Port1 = (Node*)(uintptr_t)mask;
pw->Port2->State |= invMask;
pw->Port2 = (Node*)(uintptr_t)invMask; // move port 2 completely
}
else
{
pw->Port1->State |= invMask;
pw->Port1 = (Node*)(uintptr_t)invMask;
pw->Port2->State |= mask;
pw->Port2 = (Node*)(uintptr_t)mask;
}
invMask ^= 3;
// .................................................
// create new wire ?
if(pw2 == nullptr)
{
if(pw->Port1 != (Node*)(uintptr_t)mask)
p->insert(pos,
new Wire(pw->x2, pw->y2, pw->x2, pw->y2, (Node*)(uintptr_t)mask, (Node*)(uintptr_t)invMask));
else
p->insert(pos,
new Wire(pw->x1, pw->y1, pw->x1, pw->y1, (Node*)(uintptr_t)mask, (Node*)(uintptr_t)invMask));
return;
}
// .................................................
// reuse a second wire
p->insert(pos, pw2);
pw2->Port1->disconnect(pw2); // remove connection 1
pw2->Port1->State |= 16+4;
pw2->Port2->disconnect(pw2); // remove connection 2
pw2->Port2->State |= 16+4;
a_Wires->take(a_Wires->findRef(pw2));
if(pw2->Port1 != pn2)
{
pw2->Port1 = (Node*)nullptr;
pw2->Port2->State |= mask;
pw2->Port2 = (Node*)(uintptr_t)mask;
}
else
{
pw2->Port1->State |= mask;
pw2->Port1 = (Node*)(uintptr_t)mask;
pw2->Port2 = (Node*)nullptr;
}
return;
}
// only x2 moving
p->insert(pos, new Wire(pn->cx, pn->cy, pn->cx, pn->cy, (Node*)0, (Node*)1));
// x1, x2, y2 moving
p->insert(pos, new Wire(pn->cx, pn->cy, pn->cx, pn->cy, (Node*)1, (Node*)3));
}
// ---------------------------------------------------
// For moving of elements: Copies all selected elements into the
// list 'p' and deletes them from the document.
// BUG: does not (only) copy, as the name suggests.
// cannot be used to make copies.
// returns the number of "copied" _Markers_ only
int Schematic::copySelectedElements(Q3PtrList<Element> *p)
{
int i, count = 0;
Component *pc;
Wire *pw;
Diagram *pd;
Element *pe;
Node *pn;
// test all components *********************************
// Insert components before wires in order to prevent short-cut removal.
for(pc = a_Components->first(); pc != nullptr; )
if(pc->isSelected)
{
p->append(pc);
count++;
// delete all port connections
for (Port *pp : pc->Ports)
{
pp->Connection->disconnect((Element*)pc);
pp->Connection->State = 4;
}
a_Components->take(); // take component out of the document
pc = a_Components->current();
}
else pc = a_Components->next();
// test all wires and wire labels ***********************
for(pw = a_Wires->first(); pw != nullptr; )
{
if(pw->Label) if(pw->Label->isSelected)
p->append(pw->Label);
if(pw->isSelected)
{
p->append(pw);
pw->Port1->disconnect(pw); // remove connection 1
pw->Port1->State = 4;
pw->Port2->disconnect(pw); // remove connection 2
pw->Port2->State = 4;
a_Wires->take();
pw = a_Wires->current();
}
else pw = a_Wires->next();
}
// ..............................................
// Inserts wires, if a connection to a not moving element is found.
// The order of the "for"-loops is important to guarantee a stable
// operation: components, new wires, old wires
pc = (Component*)p->first();
for(i=0; i<count; i++)
{
for (Port *pp : pc->Ports)
newMovingWires(p, pp->Connection, count);
p->findRef(pc); // back to the real current pointer
pc = (Component*)p->next();
}
for(pe = (Element*)pc; pe != nullptr; pe = p->next()) // new wires
if(pe->isSelected)
break;
for(pw = (Wire*)pe; pw != nullptr; pw = (Wire*)p->next())
if(pw->Type == isWire) // not working on labels
{
newMovingWires(p, pw->Port1, count);
newMovingWires(p, pw->Port2, count);
p->findRef(pw); // back to the real current pointer
}
// ..............................................
// delete the unused nodes
for(pn = a_Nodes->first(); pn!=0; )
{
if(pn->State & 8)
if(pn->conn_count() == 2)
if(oneTwoWires(pn)) // if possible, connect two wires to one
{
pn = a_Nodes->current();
continue;
}
if(pn->conn_count() == 0)
{
if(pn->Label)
{
pn->Label->Type = isMovingLabel;
if(pn->State & 1)
{
if(!(pn->State & 2)) pn->Label->Type = isHMovingLabel;
}
else if(pn->State & 2) pn->Label->Type = isVMovingLabel;
p->append(pn->Label); // do not forget the node labels
}
a_Nodes->remove();
pn = a_Nodes->current();
continue;
}
pn->State = 0;
pn = a_Nodes->next();
}
// test all node labels
// do this last to avoid double copying
for(pn = a_Nodes->first(); pn != 0; pn = a_Nodes->next())
if(pn->Label) if(pn->Label->isSelected)
p->append(pn->Label);
// test all paintings **********************************
for(Painting *ppa = a_Paintings->first(); ppa != 0; )
if(ppa->isSelected)
{
p->append(ppa);
a_Paintings->take();
ppa = a_Paintings->current();
}
else ppa = a_Paintings->next();
count = 0; // count markers now
// test all diagrams **********************************
for(pd = a_Diagrams->first(); pd != 0; )
if(pd->isSelected)
{
p->append(pd);
a_Diagrams->take();
pd = a_Diagrams->current();
}
else
{
for (Graph *pg : pd->Graphs)
{
QMutableListIterator<Marker *> im(pg->Markers);
Marker *pm;
while (im.hasNext())
{
pm = im.next();
if(pm->isSelected)
{
count++;
p->append(pm);
}
}
}
pd = a_Diagrams->next();
}
return count;
}
// ---------------------------------------------------
bool Schematic::copyComps2WiresPaints(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
x1=INT_MAX;
y1=INT_MAX;
x2=INT_MIN;
y2=INT_MIN;
copyLabels(x1, y1, x2, y2, ElementCache); // must be first of all !
copyComponents2(x1, y1, x2, y2, ElementCache);
copyWires(x1, y1, x2, y2, ElementCache);
copyPaintings(x1, y1, x2, y2, ElementCache);
if(y1 == INT_MAX) return false; // no element selected
return true;
}
// ---------------------------------------------------
// Used in "aligning()", "distributeHorizontal()", "distributeVertical()".
int Schematic::copyElements(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
int bx1, by1, bx2, by2;
a_Wires->setAutoDelete(false);
a_Components->setAutoDelete(false);
x1=INT_MAX;
y1=INT_MAX;
x2=INT_MIN;
y2=INT_MIN;
// take components and wires out of list, check their boundings
int number = copyComponents(x1, y1, x2, y2, ElementCache);
number += copyWires(x1, y1, x2, y2, ElementCache);
a_Wires->setAutoDelete(true);
a_Components->setAutoDelete(true);
// find upper most selected diagram
for(Diagram *pd = a_Diagrams->last(); pd != 0; pd = a_Diagrams->prev())
if(pd->isSelected)
{
pd->Bounding(bx1, by1, bx2, by2);
if(bx1 < x1) x1 = bx1;
if(bx2 > x2) x2 = bx2;
if(by1 < y1) y1 = by1;
if(by2 > y2) y2 = by2;
ElementCache->append(pd);
number++;
}
// find upper most selected painting
for(Painting *pp = a_Paintings->last(); pp != 0; pp = a_Paintings->prev())
if(pp->isSelected)
{
pp->Bounding(bx1, by1, bx2, by2);
if(bx1 < x1) x1 = bx1;
if(bx2 > x2) x2 = bx2;
if(by1 < y1) y1 = by1;
if(by2 > y2) y2 = by2;
ElementCache->append(pp);
number++;
}
return number;
}
// ---------------------------------------------------
// Deletes all selected elements.
bool Schematic::deleteElements()
{
bool sel = false;
auto selection = currentSelection();
for (auto* pc : selection.components) { // all selected component
deleteComp(pc);
sel = true;
}
for (auto* l : selection.labels) {
l->pOwner->Label = nullptr;
delete l;
}
// selection.wires cannot be used for traversing,
// because each removal of a wire or a component may change
// wire set. Consider example:
//
// o
// w1 | R1
// o-[==]-o
// w2 |
// o
//
// Two wires and a component. If component is removed first,
// then wires w1 and w2 are merged into one wire. If they
// both were selected, then selection.wires becomes no longer
// valid.
for (auto* pw = a_Wires->first(); pw != nullptr; )
{
if (pw->isSelected) {
deleteWire(pw);
// Call to deleteWire removes one item from the list
// and everything shifts one position down.
pw = a_Wires->current();
sel = true;
} else {
pw = a_Wires->next();
}
}
Diagram *pd = a_Diagrams->first();
while(pd != 0) // test all diagrams
if(pd->isSelected)
{
a_Diagrams->remove();
pd = a_Diagrams->current();
sel = true;
}
else
{
bool wasGraphDeleted = false;
// all graphs of diagram
QMutableListIterator<Graph *> ig(pd->Graphs);
Graph *pg;
while (ig.hasNext())
{
pg = ig.next();
// all markers of diagram
QMutableListIterator<Marker *> im(pg->Markers);
Marker *pm;
while (im.hasNext())
{
pm = im.next();
if(pm->isSelected)
{
im.remove();
sel = true;
}
}
if(pg->isSelected)
{
ig.remove();
sel = wasGraphDeleted = true;
}
}
if(wasGraphDeleted)
pd->recalcGraphData(); // update diagram (resize etc.)
pd = a_Diagrams->next();
} //else
for (auto* pp : selection.paintings) // test all paintings
{
// Allow removing of manually inserted port symbols when in symbol
// editing mode. If port symbol is inserted manually i.e. doesn't
// have a corresponding port in schematic, its nameStr is empty.
// If it's not empty, then invocation of Schematic::adjustPortNumbers
// must have found a pairing port in schematic.
if (pp->Name.trimmed() == ".PortSym" && a_isSymbolOnly) {
sel = true;
a_Paintings->remove(pp);
continue;
}
if(pp->Name.at(0) != '.') // do not delete "PortSym", "ID_text"
{
sel = true;
a_Paintings->remove(pp);
continue;
}
}
if(sel)
{
updateAllBoundingRect(); // set new document size
setChanged(sel, true);
}
return sel;
}
// ---------------------------------------------------
/*!
* \brief Schematic::aligning align selected elements.
* \param Mode: top, bottom, left, right, center vertical, center horizontal
* \return True if aligned
*/
bool Schematic::aligning(int Mode)
{
int x1, y1, x2, y2;
int bx1, by1, bx2, by2, *bx=0, *by=0, *ax=0, *ay=0;
QList<Element *> ElementCache;
int count = copyElements(x1, y1, x2, y2, &ElementCache);
if(count < 1) return false;
ax = ay = &x2; // = 0
switch(Mode)
{
case 0: // align top
bx = &x1;
by = &by1;
y2 = 1;
break;
case 1: // align bottom
bx = &x1;
y1 = y2;
by = &by2;
y2 = 1;
break;
case 2: // align left
by = &y1;
bx = &bx1;
y2 = 1;
break;
case 3: // align right
by = &y1;
x1 = x2;
bx = &bx2;
y2 = 1;
break;
case 4: // center horizontally
x1 = (x2+x1) / 2;
by = &x2; // = 0
ax = &bx1;
bx = &bx2;
y1 = 0;
y2 = 2;
break;
case 5: // center vertically
y1 = (y2+y1) / 2;
bx = &x2; // = 0
ay = &by1;
by = &by2;
x1 = 0;
y2 = 2;
break;
}
x2 = 0;
Wire *pw;
Component *pc;
Element *pe;
// re-insert elements
// Go backwards in order to insert node labels before its component.
QListIterator<Element *> elementCacheIter(ElementCache);
elementCacheIter.toBack();
while (elementCacheIter.hasPrevious()) {
pe = elementCacheIter.previous();
switch(pe->Type)
{
case isComponent:
case isAnalogComponent:
case isDigitalComponent:
pc = (Component*)pe;
pc->Bounding(bx1, by1, bx2, by2);
pc->setCenter(x1-((*bx)+(*ax))/y2, y1-((*by)+(*ay))/y2, true);
insertRawComponent(pc);
break;
case isWire:
pw = (Wire*)pe;
bx1 = pw->x1;
by1 = pw->y1;
bx2 = pw->x2;
by2 = pw->y2;
pw->setCenter(x1-((*bx)+(*ax))/y2, y1-((*by)+(*ay))/y2, true);
// if(pw->Label) { }
insertWire(pw);
break;
case isDiagram:
// Should the axis label be counted for ? I guess everyone
// has a different opinion.
// ((Diagram*)pe)->Bounding(bx1, by1, bx2, by2);
// Take size without axis label.
bx1 = ((Diagram*)pe)->cx;
by2 = ((Diagram*)pe)->cy;
bx2 = bx1 + ((Diagram*)pe)->x2;
by1 = by2 - ((Diagram*)pe)->y2;
((Diagram*)pe)->setCenter(x1-((*bx)+(*ax))/y2, y1-((*by)+(*ay))/y2, true);
break;
case isPainting:
((Painting*)pe)->Bounding(bx1, by1, bx2, by2);
((Painting*)pe)->setCenter(x1-((*bx)+(*ax))/y2, y1-((*by)+(*ay))/y2, true);
break;
case isNodeLabel:
if(((Element*)(((WireLabel*)pe)->pOwner))->Type & isComponent)
{
pc = (Component*)(((WireLabel*)pe)->pOwner);
pc->Bounding(bx1, by1, bx2, by2);
}
else
{
pw = (Wire*)(((WireLabel*)pe)->pOwner);
bx1 = pw->x1;
by1 = pw->y1;
bx2 = pw->x2;
by2 = pw->y2;
}
((WireLabel*)pe)->cx += x1-((*bx)+(*ax))/y2;
((WireLabel*)pe)->cy += y1-((*by)+(*ay))/y2;
insertNodeLabel((WireLabel*)pe);
break;
default:
;
}
}
ElementCache.clear();
if(count < 2) return false;
setChanged(true, true);
return true;
}
/*!
* \brief Schematic::distributeHorizontal sort selection horizontally
* \return True if sorted
*/
bool Schematic::distributeHorizontal()
{
int x1, y1, x2, y2;
int bx1, by1, bx2, by2;
QList<Element *> ElementCache;
int count = copyElements(x1, y1, x2, y2, &ElementCache);
if(count < 1) return false;
Element *pe;
WireLabel *pl;
// Node labels are not counted for, so put them to the end.
/* for(pe = ElementCache.last(); pe != 0; pe = ElementCache.prev())
if(pe->Type == isNodeLabel) {
ElementCache.append(pe);
ElementCache.removeRef(pe);
}*/
// using bubble sort to get elements x ordered
QListIterator<Element *> elementCacheIter(ElementCache);
if(count > 1)
for(int i = count-1; i>0; i--)
{
pe = ElementCache.first();
for(int j=0; j<i; j++)
{
pe->getCenter(bx1, by1);
pe=elementCacheIter.peekNext();
pe->getCenter(bx2, by2);
if(bx1 > bx2) // change two elements ?
{
ElementCache.replace(j+1, elementCacheIter.peekPrevious());
ElementCache.replace(j, pe);
pe = elementCacheIter.next();
}
}
}
ElementCache.last()->getCenter(x2, y2);
ElementCache.first()->getCenter(x1, y1);
Wire *pw;
int x = x2;
int dx=0;
if(count > 1) dx = (x2-x1)/(count-1);
// re-insert elements and put them at right position
// Go backwards in order to insert node labels before its component.
elementCacheIter.toBack();
while (elementCacheIter.hasPrevious())
{
pe = elementCacheIter.previous();
switch(pe->Type)
{
case isComponent:
case isAnalogComponent:
case isDigitalComponent:
pe->cx = x;
insertRawComponent((Component*)pe);
break;
case isWire:
pw = (Wire*)pe;
if(pw->isHorizontal())
{
x1 = pw->x2 - pw->x1;
pw->x1 = x - (x1 >> 1);
pw->x2 = pw->x1 + x1;
}
else pw->x1 = pw->x2 = x;
// if(pw->Label) { }
insertWire(pw);
break;
case isDiagram:
pe->cx = x - (pe->x2 >> 1);
break;
case isPainting:
pe->getCenter(bx1, by1);
pe->setCenter(x, by1, false);
break;
case isNodeLabel:
pl = (WireLabel*)pe;
if(((Element*)(pl->pOwner))->Type & isComponent)
pe->cx += x - ((Component*)(pl->pOwner))->cx;
else
{
pw = (Wire*)(pl->pOwner);
if(pw->isHorizontal())
{
x1 = pw->x2 - pw->x1;
pe->cx += x - (x1 >> 1) - pw->x1;
}
else pe->cx += x - pw->x1;
}
insertNodeLabel(pl);
x += dx;
break;
default:
;
}
x -= dx;
}
ElementCache.clear();
if(count < 2) return false;
setChanged(true, true);
return true;
}
/*!
* \brief Schematic::distributeVertical sort selection vertically.
* \return True if sorted
*/
bool Schematic::distributeVertical()
{
int x1, y1, x2, y2;
int bx1, by1, bx2, by2;
QList<Element *> ElementCache;
int count = copyElements(x1, y1, x2, y2, &ElementCache);
if(count < 1) return false;
// using bubble sort to get elements y ordered
QListIterator<Element *> elementCacheIter(ElementCache);
Element *pe;
if(count > 1)
for(int i = count-1; i>0; i--)
{
pe = ElementCache.first();
for(int j=0; j<i; j++)
{
pe->getCenter(bx1, by1);
pe = elementCacheIter.peekNext();
pe->getCenter(bx2, by2);
if(by1 > by2) // change two elements ?
{
ElementCache.replace(j+1, elementCacheIter.peekPrevious());
ElementCache.replace(j, pe);
pe = elementCacheIter.next();
}
}
}
ElementCache.last()->getCenter(x2, y2);
ElementCache.first()->getCenter(x1, y1);
Wire *pw;
int y = y2;
int dy=0;
if(count > 1) dy = (y2-y1)/(count-1);
// re-insert elements and put them at right position
// Go backwards in order to insert node labels before its component.
elementCacheIter.toBack();
while (elementCacheIter.hasPrevious())
{
pe = elementCacheIter.previous();
switch(pe->Type)
{
case isComponent:
case isAnalogComponent:
case isDigitalComponent:
pe->cy = y;
insertRawComponent((Component*)pe);
break;
case isWire:
pw = (Wire*)pe;
if(pw->isHorizontal()) pw->y1 = pw->y2 = y;
else
{
y1 = pw->y2 - pw->y1;
pw->y1 = y - (y1 >> 1);
pw->y2 = pe->y1 + y1;
}
// if(pw->Label) { }
insertWire(pw);
break;
case isDiagram:
pe->cy = y + (pe->y2 >> 1);
break;
case isPainting:
pe->getCenter(bx1, by1);
pe->setCenter(bx1, y, false);
break;
case isNodeLabel:
if(((Element*)(((WireLabel*)pe)->pOwner))->Type & isComponent)
pe->cy += y - ((Component*)(((WireLabel*)pe)->pOwner))->cy;
else
{
pw = (Wire*)(((WireLabel*)pe)->pOwner);
if(!pw->isHorizontal())
{
y1 = pw->y2 - pw->y1;
pe->cy += y - (y1 >> 1) - pw->y1;
}
else pe->cy += y - pw->y1;
}
insertNodeLabel((WireLabel*)pe);
y += dy;
break;
default:
;
}
y -= dy;
}
ElementCache.clear();
if(count < 2) return false;
setChanged(true, true);
return true;
}
/* *******************************************************************
***** *****
***** Actions with components *****
***** *****
******************************************************************* */
// Finds the correct number for power sources, subcircuit ports and
// digital sources and sets them accordingly.
void Schematic::setComponentNumber(Component* component)
{
if (component->Props.isEmpty()) return;
auto* component_number_property = component->Props.front();
if (component_number_property == nullptr || component_number_property->Name != "Num") return;
// Collect all numbers that are already in use
std::set<int> used_numbers;
for (auto* other_component : *a_Components){
if (other_component->Model != component->Model) continue;
used_numbers.insert(other_component->Props.front()->Value.toInt());
}
// If current component number cannot be found among used component numbers
// then everything is ok, we're free to leave now
if (used_numbers.find(component_number_property->Value.toInt()) == used_numbers.end()) return;
// Otherwise look for the first free number
for (int n = 1; ; n++) {
if (used_numbers.find(n) != used_numbers.end()) continue;
component_number_property->Value = QString::number(n);
return;
}
}
void Schematic::insertComponentNodes(Component *component, bool noOptimize)
{
// simulation components do not have ports
if (component->Ports.empty()) return;
// connect every node of the component to corresponding schematic node
for (Port *pp : component->Ports)
pp->Connection = insertNode(pp->x+component->cx, pp->y+component->cy, component);
if(noOptimize) return;
// if component over wire then delete this wire
QListIterator<Port *> iport(component->Ports);
// omit the first element
Port *component_port = iport.next();
std::vector<Wire*> dead_wires;
while (iport.hasNext()) {
component_port = iport.next();
// At first iterate over all port's connections to find wires
// connecting this port to another port of the same component.
for (auto* connected : *component_port->Connection) {
if (connected->Type != isWire) {
continue;
}
auto wire = static_cast<Wire*>(connected);
if (wire->Port1->is_connected(component) && wire->Port2->is_connected(component)) {
dead_wires.push_back(wire);
}
}
// Disconnect and remove the wires that have been found earlier.
//
// It must be done while not iterating over the node's connections
// because invocation of disconnect() invalidates the iterator over
// node's connections. In short: calling disconnect() while iterating
// over connections leads to segmentation fault.
for (auto w : dead_wires) {
deleteWire(w);
}
dead_wires.clear();
}
}
// ---------------------------------------------------
// Used for example in moving components.
void Schematic::insertRawComponent(Component *c, bool noOptimize)
{
// connect every node of component to corresponding schematic node
insertComponentNodes(c, noOptimize);
a_Components->append(c);
// a ground symbol erases an existing label on the wire line
if(c->Model == "GND")
{
c->Model = "x"; // prevent that this ground is found as label
Element *pe = getWireLabel(c->Ports.first()->Connection);
if(pe) if((pe->Type & isComponent) == 0)
{
delete ((Conductor*)pe)->Label;
((Conductor*)pe)->Label = 0;
}
c->Model = "GND"; // rebuild component model
}
}
// ---------------------------------------------------
void Schematic::recreateComponent(Component *Comp)
{
WireLabel **plMem=0, **pl;
int PortCount = Comp->Ports.count();
if(PortCount > 0)
{
// Save the labels whose node is not connected to somewhere else.
// Otherwise the label would be deleted.
pl = plMem = (WireLabel**)malloc(PortCount * sizeof(WireLabel*));
for (Port *pp : Comp->Ports)
if(pp->Connection->conn_count() < 2)
{
*(pl++) = pp->Connection->Label;
pp->Connection->Label = 0;
}
else *(pl++) = 0;
}
int x = Comp->tx, y = Comp->ty;
int x1 = Comp->x1, x2 = Comp->x2, y1 = Comp->y1, y2 = Comp->y2;
QString tmp = Comp->Name; // is sometimes changed by "recreate"
Comp->recreate(this); // to apply changes to the schematic symbol
Comp->Name = tmp;
if(x < x1)
x += Comp->x1 - x1;
else if(x > x2)
x += Comp->x2 - x2;
if(y < y1)
y += Comp->y1 - y1;
else if(y > y2)
y += Comp->y2 - y2;
Comp->tx = x;
Comp->ty = y;
if(PortCount > 0)
{
// restore node labels
pl = plMem;
for (Port *pp : Comp->Ports)
{
if(*pl != 0)
{
(*pl)->cx = pp->Connection->cx;
(*pl)->cy = pp->Connection->cy;
placeNodeLabel(*pl);
}
pl++;
if((--PortCount) < 1) break;
}
for( ; PortCount > 0; PortCount--)
{
delete (*pl); // delete not needed labels
pl++;
}
free(plMem);
}
}
// ---------------------------------------------------
void Schematic::insertComponent(Component *c)
{
// connect every node of component to corresponding schematic node
insertComponentNodes(c, false);
bool ok;
QString s;
int max=1, len = c->Name.length(), z;
if(c->Name.isEmpty())
{
// a ground symbol erases an existing label on the wire line
if(c->Model == "GND")
{
c->Model = "x"; // prevent that this ground is found as label
Element *pe = getWireLabel(c->Ports.first()->Connection);
if(pe) if((pe->Type & isComponent) == 0)
{
delete ((Conductor*)pe)->Label;
((Conductor*)pe)->Label = 0;
}
c->Model = "GND"; // rebuild component model
}
}
else
{
// determines the name by looking for names with the same
// prefix and increment the number
for(Component *pc = a_Components->first(); pc != 0; pc = a_Components->next())
if(pc->Name.left(len) == c->Name)
{
s = pc->Name.right(pc->Name.length()-len);
z = s.toInt(&ok);
if(ok) if(z >= max) max = z + 1;
}
c->Name += QString::number(max); // create name with new number
}
setComponentNumber(c); // important for power sources and subcircuit ports
a_Components->append(c);
}
// ---------------------------------------------------
void Schematic::activateCompsWithinRect(int x1, int y1, int x2, int y2)
{
bool changed = false;
int cx1, cy1, cx2, cy2, a;
// exchange rectangle coordinates to obtain x1 < x2 and y1 < y2
cx1 = (x1 < x2) ? x1 : x2;
cx2 = (x1 > x2) ? x1 : x2;
cy1 = (y1 < y2) ? y1 : y2;
cy2 = (y1 > y2) ? y1 : y2;
x1 = cx1;
x2 = cx2;
y1 = cy1;
y2 = cy2;
for(Component *pc = a_Components->first(); pc != 0; pc = a_Components->next())
{
pc->Bounding(cx1, cy1, cx2, cy2);
if(cx1 >= x1) if(cx2 <= x2) if(cy1 >= y1) if(cy2 <= y2)
{
a = pc->isActive - 1;
if(pc->Ports.count() > 1)
{
if(a < 0) a = 2;
pc->isActive = a; // change "active status"
}
else
{
a &= 1;
pc->isActive = a; // change "active status"
if(a == COMP_IS_ACTIVE) // only for active (not shorten)
if(pc->Model == "GND") // if existing, delete label on wire line
oneLabel(pc->Ports.first()->Connection);
}
changed = true;
}
}
if(changed) setChanged(true, true);
}
// ---------------------------------------------------
bool Schematic::activateSpecifiedComponent(int x, int y)
{
int x1, y1, x2, y2, a;
for(Component *pc = a_Components->first(); pc != 0; pc = a_Components->next())
{
pc->Bounding(x1, y1, x2, y2);
if(x >= x1) if(x <= x2) if(y >= y1) if(y <= y2)
{
a = pc->isActive - 1;
if(pc->Ports.count() > 1)
{
if(a < 0) a = 2;
pc->isActive = a; // change "active status"
}
else
{
a &= 1;
pc->isActive = a; // change "active status"
if(a == COMP_IS_ACTIVE) // only for active (not shorten)
if(pc->Model == "GND") // if existing, delete label on wire line
oneLabel(pc->Ports.first()->Connection);
}
setChanged(true, true);
return true;
}
}
return false;
}
// ---------------------------------------------------
bool Schematic::activateSelectedComponents()
{
int a;
bool sel = false;
for (auto* pc : currentSelection().components) {
a = pc->isActive - 1;
if(pc->Ports.count() > 1)
{
if(a < 0) a = 2;
pc->isActive = a; // change "active status"
}
else
{
a &= 1;
pc->isActive = a; // change "active status"
if(a == COMP_IS_ACTIVE) // only for active (not shorten)
if(pc->Model == "GND") // if existing, delete label on wire line
oneLabel(pc->Ports.first()->Connection);
}
sel = true;
}
if(sel) setChanged(true, true);
return sel;
}
// ---------------------------------------------------
// Sets the component ports anew. Used after rotate, mirror etc.
void Schematic::setCompPorts(Component *pc)
{
WireLabel *pl;
Q3PtrList<WireLabel> LabelCache;
for (Port *pp : pc->Ports)
{
pp->Connection->disconnect((Element*)pc);// delete connections
switch(pp->Connection->conn_count())
{
case 0:
pl = pp->Connection->Label;
if(pl)
{
LabelCache.append(pl);
pl->cx = pp->x + pc->cx;
pl->cy = pp->y + pc->cy;
}
a_Nodes->removeRef(pp->Connection);
break;
case 2:
oneTwoWires(pp->Connection); // try to connect two wires to one
default:
;
}
}
// Re-connect component node to schematic node. This must be done completely
// after the first loop in order to avoid problems with node labels.
for (Port *pp : pc->Ports)
pp->Connection = insertNode(pp->x+pc->cx, pp->y+pc->cy, pc);
for(pl = LabelCache.first(); pl != 0; pl = LabelCache.next())
insertNodeLabel(pl);
}
// ---------------------------------------------------
// Returns a pointer of the component on whose text x/y points.
Component* Schematic::selectCompText(int x_, int y_, int& w, int& h) const
{
int a, b, dx, dy;
for(Component *pc = a_Components->first(); pc != 0; pc = a_Components->next())
{
a = pc->cx + pc->tx;
if(x_ < a) continue;
b = pc->cy + pc->ty;
if(y_ < b) continue;
pc->textSize(dx, dy);
if(x_ > a+dx) continue;
if(y_ > b+dy) continue;
w = dx;
h = dy;
return pc;
}
return 0;
}
// ---------------------------------------------------
Component* Schematic::searchSelSubcircuit()
{
Component *sub=0;
for(auto* pc : currentSelection().components)
{
if(pc->Model != "Sub")
if(pc->Model != "VHDL")
if(pc->Model != "Verilog") continue;
if(sub != 0) return 0; // more than one subcircuit selected
sub = pc;
}
return sub;
}
// ---------------------------------------------------
Component* Schematic::selectedComponent(int x, int y)
{
// test all components
for(Component *pc = a_Components->first(); pc != 0; pc = a_Components->next())
if(pc->getSelected(x, y))
return pc;
return 0;
}
// ---------------------------------------------------
// Deletes the component 'c'.
void Schematic::deleteComp(Component *c)
{
// delete all port connections
for (Port *pn : c->Ports)
switch(pn->Connection->conn_count())
{
case 1 :
delete pn->Connection->Label;
a_Nodes->removeRef(pn->Connection); // delete open nodes
pn->Connection = 0; // (auto-delete)
break;
case 3 :
pn->Connection->disconnect(c);// delete connection
oneTwoWires(pn->Connection); // two wires -> one wire
break;
default :
pn->Connection->disconnect(c);// remove connection
break;
}
emit signalComponentDeleted(c);
a_Components->removeRef(c); // delete component
}
Component *Schematic::getComponentByName(const QString& compname) const
{
for(Component *pc = a_Components->first(); pc != nullptr; pc = a_Components->next()) {
if (pc->Name.toLower() == compname.toLower()) {
return pc;
}
}
return nullptr;
}
// ---------------------------------------------------
int Schematic::copyComponents(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
int bx1, by1, bx2, by2, count=0;
// find bounds of all selected components
for (auto* pc : currentSelection().components)
{
pc->Bounding(bx1, by1, bx2, by2); // is needed because of "distribute
if(bx1 < x1) x1 = bx1; // uniformly"
if(bx2 > x2) x2 = bx2;
if(by1 < y1) y1 = by1;
if(by2 > y2) y2 = by2;
count++;
ElementCache->append(pc);
// rescue non-selected node labels
for (Port *pp : pc->Ports)
if(pp->Connection->Label)
if(pp->Connection->conn_count() < 2)
{
ElementCache->append(pp->Connection->Label);
// Don't set pp->Connection->Label->pOwner=0,
// so text position stays unchanged, but
// remember component for align/distribute.
pp->Connection->Label->pOwner = (Node*)pc;
pp->Connection->Label = 0;
}
deleteComp(pc);
}
return count;
}
// ---------------------------------------------------
void Schematic::copyComponents2(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
// find bounds of all selected components
for (auto* pc : currentSelection().components)
{
// is better for unsymmetrical components
if(pc->cx < x1) x1 = pc->cx;
if(pc->cx > x2) x2 = pc->cx;
if(pc->cy < y1) y1 = pc->cy;
if(pc->cy > y2) y2 = pc->cy;
ElementCache->append(pc);
// rescue non-selected node labels
for (Port *pp : pc->Ports)
if(pp->Connection->Label)
if(pp->Connection->conn_count() < 2)
{
ElementCache->append(pp->Connection->Label);
pp->Connection->Label = 0;
// Don't set pp->Connection->Label->pOwner=0,
// so text position stays unchanged.
}
deleteComp(pc);
}
}
/* *******************************************************************
***** *****
***** Actions with labels *****
***** *****
******************************************************************* */
// Test, if wire connects wire line with more than one label and delete
// all further labels. Also delete all labels if wire line is grounded.
void Schematic::oneLabel(Node *n1)
{
Wire *pw;
Node *pn, *pNode;
WireLabel *pl = 0;
bool named=false; // wire line already named ?
Q3PtrList<Node> Cons;
for(pn = a_Nodes->first(); pn!=0; pn = a_Nodes->next())
pn->y1 = 0; // mark all nodes as not checked
Cons.append(n1);
n1->y1 = 1; // mark Node as already checked
for(pn = Cons.first(); pn!=0; pn = Cons.next())
{
if(pn->Label)
{
if(named)
{
delete pn->Label;
pn->Label = 0; // erase double names
}
else
{
named = true;
pl = pn->Label;
}
}
for(auto* pe : *pn)
{
if(pe->Type != isWire)
{
if(((Component*)pe)->isActive == COMP_IS_ACTIVE)
if(((Component*)pe)->Model == "GND")
{
named = true;
if(pl)
{
pl->pOwner->Label = 0;
delete pl;
}
pl = 0;
}
continue;
}
pw = (Wire*)pe;
if(pn != pw->Port1) pNode = pw->Port1;
else pNode = pw->Port2;
if(pNode->y1) continue;
pNode->y1 = 1; // mark Node as already checked
Cons.append(pNode);
Cons.findRef(pn);
if(pw->Label)
{
if(named)
{
delete pw->Label;
pw->Label = 0; // erase double names
}
else
{
named = true;
pl = pw->Label;
}
}
}
}
}
// ---------------------------------------------------
int Schematic::placeNodeLabel(WireLabel *pl)
{
Node *pn;
int x = pl->cx;
int y = pl->cy;
// check if new node lies upon an existing node
for(pn = a_Nodes->first(); pn != 0; pn = a_Nodes->next())
if(pn->cx == x) if(pn->cy == y) break;
if(!pn) return -1;
Element *pe = getWireLabel(pn);
if(pe) // name found ?
{
if(pe->Type & isComponent)
{
delete pl;
return -2; // ground potential
}
delete ((Conductor*)pe)->Label;
((Conductor*)pe)->Label = 0;
}
pn->Label = pl; // insert node label
pl->Type = isNodeLabel;
pl->pOwner = pn;
return 0;
}
// ---------------------------------------------------
// Test, if wire line is already labeled and returns a pointer to the
// labeled element.
Element* Schematic::getWireLabel(Node *pn_)
{
Wire *pw;
Node *pn, *pNode;
Q3PtrList<Node> Cons;
for(pn = a_Nodes->first(); pn!=0; pn = a_Nodes->next())
pn->y1 = 0; // mark all nodes as not checked
Cons.append(pn_);
pn_->y1 = 1; // mark Node as already checked
for(pn = Cons.first(); pn!=0; pn = Cons.next())
if(pn->Label) return pn;
else
for(auto* pe : *pn)
{
if(pe->Type != isWire)
{
if(((Component*)pe)->isActive == COMP_IS_ACTIVE)
if(((Component*)pe)->Model == "GND") return pe;
continue;
}
pw = (Wire*)pe;
if(pw->Label) return pw;
if(pn != pw->Port1) pNode = pw->Port1;
else pNode = pw->Port2;
if(pNode->y1) continue;
pNode->y1 = 1; // mark Node as already checked
Cons.append(pNode);
Cons.findRef(pn);
}
return 0; // no wire label found
}
// ---------------------------------------------------
// Inserts a node label.
void Schematic::insertNodeLabel(WireLabel *pl)
{
if(placeNodeLabel(pl) != -1)
return;
// Go on, if label don't lie on existing node.
Wire *pw = selectedWire(pl->cx, pl->cy);
if(pw) // lies label on existing wire ?
{
if(getWireLabel(pw->Port1) == 0) // wire not yet labeled ?
pw->setName(pl->Name, pl->initValue, 0, pl->cx, pl->cy);
delete pl;
return;
}
Node *pn = new Node(pl->cx, pl->cy);
a_Nodes->append(pn);
pn->Label = pl;
pl->Type = isNodeLabel;
pl->pOwner = pn;
}
// ---------------------------------------------------
void Schematic::copyLabels(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
// find bounds of all selected labels
for (auto* pl : currentSelection().labels)
{
if(pl->x1 < x1) x1 = pl->x1;
if(pl->y1-pl->y2 < y1) y1 = pl->y1-pl->y2;
if(pl->x1+pl->x2 > x2) x2 = pl->x1+pl->x2;
if(pl->y1 > y2) y2 = pl->y1;
ElementCache->append(pl);
}
}
/* *******************************************************************
***** *****
***** Actions with paintings *****
***** *****
******************************************************************* */
Painting* Schematic::selectedPainting(float fX, float fY)
{
float Corr = 5.0 / a_Scale; // size of line select
for(Painting *pp = a_Paintings->first(); pp != 0; pp = a_Paintings->next())
if(pp->getSelected(fX, fY, Corr))
return pp;
return 0;
}
// ---------------------------------------------------
void Schematic::copyPaintings(int& x1, int& y1, int& x2, int& y2,
QList<Element *> *ElementCache)
{
int bx1, by1, bx2, by2;
// find boundings of all selected paintings
for (auto* pp : currentSelection().paintings)
{
pp->Bounding(bx1, by1, bx2, by2);
if(bx1 < x1) x1 = bx1;
if(bx2 > x2) x2 = bx2;
if(by1 < y1) y1 = by1;
if(by2 > y2) y2 = by2;
ElementCache->append(pp);
a_Paintings->take(a_Paintings->find(pp));
}
}
std::pair<bool,Node*> Schematic::connectWithWire(const QPoint& a, const QPoint& b) noexcept {
auto points = a_wirePlanner.plan(a, b);
int resultFlags = 0;
// Take points by pairs
for (std::size_t i = 1; i < points.size(); i++) {
auto m = points[i-1];
auto n = points[i];
resultFlags = resultFlags | insertWire(new Wire(m.x(), m.y(), n.x(), n.y()));
}
const auto lastPoint = points.back();
for (auto* node : *a_Nodes) {
if (node->cx == lastPoint.x() && node->cy == lastPoint.y()) {
return {resultFlags, node};
}
}
// If we've got there, then the point at which the wire ended
// was optimized away. For example if there was a wire AB…
//
// A B
// o--------o
//
// And a new wire was drawn from point M to point A:
//
// M A B
// o------o--------o
//
// then two wires wouild be merged and point A would be removed:
//
// M B
// o---------------o
return {resultFlags, nullptr};
}
void Schematic::showEphemeralWire(const QPoint& a, const QPoint& b) noexcept {
auto points = a_wirePlanner.plan(a, b);
// Take points by pairs
for (std::size_t i = 1; i < points.size(); i++) {
auto m = points[i-1];
auto n = points[i];
PostPaintEvent(_Line, m.x(), m.y(), n.x(), n.y(), 3);
}
}
// vim:ts=8:sw=2:noet