/*
* tuya.cpp
*
* Implementation of Tuya cluster.
*
*/
#include "de_web_plugin.h"
#include "de_web_plugin_private.h"
#include "tuya.h"
#include "product_match.h"
//***********************************************************************************
// Value for dp_type
// ------------------
// 0x00 DP_TYPE_RAW ?
// 0x01 DP_TYPE_BOOL ?
// 0x02 DP_TYPE_VALUE 4 byte unsigned integer
// 0x03 DP_TYPE_STRING variable length string
// 0x04 DP_TYPE_ENUM 1 byte enum
// 0x05 DP_TYPE_FAULT 1 byte bitmap (didn't test yet)
// Value for dp_identifier (it s device dependent)
//
// Value For Various sensor
// -------------------------
// 0x03 Presence detection (with 0x04)
// 0x65 Water leak (with 0x01)
// List of tuya command
// ---------------------
// Cmd ID Description
// 0x01 Product Information Inquiry / Reporting
// 0x02 Device Status Query / Report
// 0x03 Zigbee Device Reset
// 0x04 Order Issuance
// 0x05 Status Report
// 0x06 Status Search
// 0x07 reserved
// 0x08 Zigbee Device Functional Test
// 0x09 Query key information (only scene switch devices are valid)
// 0x0A Scene wakeup command (only scene switch device is valid)
// 0x0A-0x23 reserved
// 0x24 Time synchronization
//******************************************************************************************
/*! Helper to generate a new task with new task and req id based on a reference */
static void copyTaskReq(TaskItem &a, TaskItem &b)
{
b.req.dstAddress() = a.req.dstAddress();
b.req.setDstAddressMode(a.req.dstAddressMode());
b.req.setSrcEndpoint(a.req.srcEndpoint());
b.req.setDstEndpoint(a.req.dstEndpoint());
b.req.setRadius(a.req.radius());
b.req.setTxOptions(a.req.txOptions());
b.req.setSendDelay(a.req.sendDelay());
b.zclFrame.payload().clear();
}
bool UseTuyaCluster(const QString &manufacturer)
{
// https://docs.tuya.com/en/iot/device-development/module/zigbee-module/zigbeetyzs11module?id=K989rik5nkhez
//_TZ3000 don't use tuya cluster
//_TYZB01 don't use tuya cluster
//_TYZB02 don't use tuya cluster
//_TZ3400 don't use tuya cluster
if (manufacturer.startsWith(QLatin1String("_TZE200_")) || // Tuya clutster visible
manufacturer.startsWith(QLatin1String("Tuya_C_")) || // Used by fake device
manufacturer.startsWith(QLatin1String("_TYST11_"))) // Tuya cluster invisible
{
return true;
}
return false;
}
// Time sync command
// https://developer.tuya.com/en/docs/iot/device-development/embedded-software-development/mcu-development-access/zigbee-general-solution/tuya-zigbee-module-uart-communication-protocol
static void handleTuyaTimeSyncRequest(const deCONZ::ApsDataIndication &ind, deCONZ::ZclFrame &zclFrame)
{
DBG_Printf(DBG_INFO, "Tuya Time sync request: 0x%016llx\n", ind.srcAddress().ext());
quint16 seqno;
{
QDataStream stream(zclFrame.payload());
stream.setByteOrder(QDataStream::BigEndian);
stream >> seqno;
}
// This is disabled for the moment, need investigations
// It seem some device send a UnknowHeader = 0x0000
// it s always 0x0000 for device > gateway
// And always 0x0008 for gateway > device (0x0008 is the payload size)
//
//if (unknowHeader == 0x0000)
//{
//}
quint32 timeNow = 0xFFFFFFFF; // id 0x0000 Time
qint32 timeZone = 0xFFFFFFFF; // id 0x0002 TimeZone
quint32 timeDstStart = 0xFFFFFFFF; // id 0x0003 DstStart
quint32 timeDstEnd = 0xFFFFFFFF; // id 0x0004 DstEnd
qint32 timeDstShift = 0xFFFFFFFF; // id 0x0005 DstShift
quint32 timeStdTime = 0xFFFFFFFF; // id 0x0006 StandardTime
quint32 timeLocalTime = 0xFFFFFFFF; // id 0x0007 LocalTime
getTime(&timeNow, &timeZone, &timeDstStart, &timeDstEnd, &timeDstShift, &timeStdTime, &timeLocalTime, UNIX_EPOCH);
QByteArray data;
QDataStream stream(&data, QIODevice::WriteOnly);
stream.setByteOrder(QDataStream::BigEndian);
stream << seqno;
stream << timeNow; // UTC time
stream << timeLocalTime; // local time
plugin->sendTuyaCommand(ind, TUYA_TIME_SYNCHRONISATION, data);
}
/*! Handle packets related to Tuya 0xEF00 cluster.
\param ind the APS level data indication containing the ZCL packet
\param zclFrame the actual ZCL frame which holds the scene cluster reponse
Taken from https://medium.com/@dzegarra/zigbee2mqtt-how-to-add-support-for-a-new-tuya-based-device-part-2-5492707e882d
*/
void DeRestPluginPrivate::handleTuyaClusterIndication(const deCONZ::ApsDataIndication &ind, deCONZ::ZclFrame &zclFrame, Device *device)
{
if (zclFrame.isDefaultResponse())
{
return;
}
if (zclFrame.commandId() == TUYA_TIME_SYNCHRONISATION)
{
handleTuyaTimeSyncRequest(ind, zclFrame);
return;
}
// Note(mpi) DDF devices that are using {"parse": "fn": "tuya"} are expected
// to not use this function other than for time sync.
if (device && device->managed())
{
// clumsy workaround to not interfere with DDF handlers
for (const Resource *r : device->subDevices())
{
for (int i = 0; i < r->itemCount(); i++)
{
if (r->itemForIndex(size_t(i))->parseFunction() == parseTuyaData)
{
return;
}
}
}
}
bool update = false;
LightNode *lightNode = getLightNodeForAddress(ind.srcAddress(), ind.srcEndpoint());
Sensor *sensorNode = getSensorNodeForAddressAndEndpoint(ind.srcAddress(), ind.srcEndpoint());
if (!sensorNode && !lightNode)
{
return;
}
QString productId;
if (lightNode)
{
productId = R_GetProductId(lightNode);
}
else
{
productId = R_GetProductId(sensorNode);
}
DBG_Printf(DBG_INFO_L2, "Tuya debug Request : Address 0x%016llX, Endpoint 0x%02X, Command 0x%02X, Payload %s\n", ind.srcAddress().ext(), ind.srcEndpoint(), zclFrame.commandId(), qPrintable(zclFrame.payload().toHex()));
if (zclFrame.commandId() == TUYA_REQUEST)
{
// 0x00 : TUYA_REQUEST > Used to send command, so not used here
}
else if (zclFrame.commandId() == TUYA_REPORTING || zclFrame.commandId() == TUYA_QUERY || zclFrame.commandId() == TUYA_STATUS_SEARCH)
{
// 0x01 : TUYA_REPORTING > Used to inform of changes in its state.
// 0x02 : TUYA_QUERY > Send after receiving a 0x00 command.
// 0x06 : TUYA_STATUS_SEARCH > kind of reporting.
if (zclFrame.payload().size() < 7)
{
DBG_Printf(DBG_INFO, "Tuya : Payload too short\n");
return;
}
QDataStream stream(zclFrame.payload());
stream.setByteOrder(QDataStream::LittleEndian);
// "dp" field describes the action/message of a command frame and was composed by a type and an identifier
// Composed by a type (dp_type) and an identifier (dp_identifier), the identifier is device dependant.
// "transid" is just a "counter", a response will have the same transif than the command.
// "Status" and "fn" are always 0
// More explanations at top of file
quint8 status;
quint8 transid;
quint16 dp;
quint8 fn;
quint8 length = 0;
qint32 data = 0;
quint8 dp_type;
quint8 dp_identifier;
quint8 dummy = 0;
stream >> status;
stream >> transid;
stream >> dp;
stream >> fn;
//Convertion octet string to decimal value
stream >> length;
//security, it seem 4 is the maximum
if (length > 4)
{
DBG_Printf(DBG_INFO, "Tuya : Schedule command\n");
}
else
{
for (; length > 0; length--)
{
stream >> dummy;
data = data << 8;
data = data + dummy;
}
}
//To be more precise
dp_identifier = (dp & 0xFF);
dp_type = ((dp >> 8) & 0xFF);
DBG_Printf(DBG_INFO, "Tuya debug 4 : Address 0x%016llX Payload %s\n", ind.srcAddress().ext(), qPrintable(zclFrame.payload().toHex()));
DBG_Printf(DBG_INFO, "Tuya debug 5 : Status: %u Transid: %u Dp: %u (0x%02X,0x%02X) Fn: %u Data %d\n", status, transid, dp, dp_type, dp_identifier, fn, data);
if (length > 4) //schedule command
{
// Monday = 64, Tuesday = 32, Wednesday = 16, Thursday = 8, Friday = 4, Saturday = 2, Sunday = 1
// If you want your schedule to run only on workdays, the value would be W124. (64+32+16+8+4 = 124)
// The API specifies 3 numbers, so a schedule that runs on Monday would be W064.
//
// Workday = W124
// Not working day = W003
// Saturday = W002
// Sunday = W001
// All days = W127
QString transitions;
quint8 Scheduledatalength = zclFrame.payload().size() - 6;
quint8 blocklength = 0;
quint8 values_to_read = 0;
quint8 hour;
quint8 minut;
quint8 heatSetpoint;
quint16 minut16;
quint16 heatSetpoint16;
quint8 part = 0;
QList<int> listday;
switch (dp)
{
case 0x0070: //work days (6)
{
part = 1;
listday << 124;
values_to_read = 3;
blocklength = length / values_to_read;
}
break;
case 0x0071: // holiday = Not working day (6)
{
part = 1;
listday << 3;
values_to_read = 3;
blocklength = length / values_to_read;
}
break;
case 0x0065: // Moe thermostat W124 (4) + W002 (4) + W001 (4)
{
part = length / 3;
listday << 124 << 2 << 1;
values_to_read = 3;
blocklength = length / values_to_read;
}
break;
// Daily schedule (mode 8)(minut 16)(temperature 16)(minut 16)(temperature 16)(minut 16)(temperature 16)(minut 16)(temperature 16)
case 0x007B: // Sunday
case 0x007C: // Monday
case 0x007D: // Thuesday
case 0x007E: // Wednesday
case 0x007F: // Thursday
case 0x0080: // Friday
case 0x0081: // Saturday
{
const std::array<int, 7> t = {1,64,32,46,8,4,2};
part = 1;
if (dp < 0x007B || (dp - 0x007B) >= static_cast<int>(t.size()))
{
DBG_Printf(DBG_INFO, "Tuya unsupported daily schedule dp value: 0x%04X\n", dp);
return; // bail out early
}
listday << t[dp - 0x007B];
values_to_read = 2;
blocklength = (length - 1) / values_to_read;
quint8 mode;
stream >> mode; // First octet is the mode
Scheduledatalength-=1;
break;
}
default:
{
DBG_Printf(DBG_INFO, "Tuya : Unknow Schedule mode\n");
}
break;
}
//Sanitary check
if (Scheduledatalength < (part * blocklength * values_to_read))
{
DBG_Printf(DBG_INFO, "Tuya : Schedule data error\n");
return;
}
for (; part > 0; part--)
{
for (; blocklength > 0; blocklength--)
{
if (dp >= 0x007B && dp <= 0x0081)
{
stream >> minut16;
stream >> heatSetpoint16;
hour = static_cast<quint8>((minut16 / 60) & 0xff);
minut = static_cast<quint8>((minut16 - 60 * hour) & 0xff);
heatSetpoint = static_cast<quint8>((heatSetpoint16 / 10) & 0xff);
}
else
{
stream >> hour;
stream >> minut;
stream >> heatSetpoint;
}
transitions += QString("T%1:%2|%3")
.arg(hour, 2, 10, QChar('0'))
.arg(minut, 2, 10, QChar('0'))
.arg(heatSetpoint);
if (part > 0 && listday.size() >= static_cast<int>(part))
{
updateThermostatSchedule(sensorNode, listday.at(part - 1), transitions);
}
}
}
return;
}
// Sensor and light use same cluster, so need to make a choice for device that have both
// Some device have sensornode AND lightnode, so need to use the good one.
if (sensorNode && lightNode)
{
if (dp == 0x0215) // battery
{
lightNode = nullptr;
}
if (sensorNode->type() == QLatin1String("ZHAThermostat"))
{
lightNode = nullptr;
}
if (productId == QLatin1String("NAS-AB02B0 Siren"))
{
if (dp == 0x0168) // Siren alarm
{
sensorNode = nullptr;
}
else
{
lightNode = nullptr;
}
}
}
//Some device are more than 1 sensors for the same endpoint, so trying to take the good one
if (sensorNode && productId == QLatin1String("NAS-AB02B0 Siren"))
{
switch (dp)
{
//temperature
case 0x0269:
{
sensorNode = getSensorNodeForAddressAndEndpoint(ind.srcAddress(), ind.srcEndpoint(), QLatin1String("ZHATemperature"));
}
break;
//Humidity
case 0x026A:
{
sensorNode = getSensorNodeForAddressAndEndpoint(ind.srcAddress(), ind.srcEndpoint(), QLatin1String("ZHAHumidity"));
}
break;
default:
// All other are for the alarm sensor
{
sensorNode = getSensorNodeForAddressAndEndpoint(ind.srcAddress(), ind.srcEndpoint(), QLatin1String("ZHAAlarm"));
}
break;
}
}
//Some device have sensor created on other endpoint and other cluster but are using the endpoint 0x01 and the cluster 0xEF00
if (sensorNode && R_GetProductId(sensorNode) == QLatin1String("Tuya_SEN Multi-sensor"))
{
switch (dp)
{
//temperature
case 0x026B:
{
sensorNode = getSensorNodeForAddressAndEndpoint(ind.srcAddress(), 0x02, QLatin1String("ZHATemperature"));
}
break;
//Humidity
case 0x026C:
{
sensorNode = getSensorNodeForAddressAndEndpoint(ind.srcAddress(), 0x02, QLatin1String("ZHAHumidity"));
}
break;
default:
break;
}
}
if (lightNode)
{
//Window covering ?
if (productId.startsWith(QLatin1String("Tuya_COVD")))
{
// This device don't use same command, so I m using this hack to keep an uniform code
if (productId == QLatin1String("Tuya_COVD AM43-0.45/40-ES-EZ(TY)"))
{
if (dp == 0x0401)
{
if (data == 0x01) { data = 0x00; }
else if (data == 0x00) { data = 0x01; }
}
}
switch (dp)
{
// 0x0407 > starting moving
// 0x0105 > configuration done
case 0x0401:
{
if (data == 0x02) //open
{
lightNode->setValue(RStateOpen, true);
lightNode->setValue(RStateOn, false);
}
else if (data == 0x00) //close
{
lightNode->setValue(RStateOpen, false);
lightNode->setValue(RStateOn, true);
}
else if (data == 0x01) //stop
{
}
}
break;
case 0x0202: // going to position
case 0x0203: // position reached (more usefull I think)
{
quint8 lift = static_cast<quint8>(data);
// Need reverse
if (productId.startsWith(QLatin1String("Tuya_COVD YS-MT750")) ||
productId.startsWith(QLatin1String("Tuya_COVD AM43-0.45/40-ES-EZ(TY)")) ||
productId.startsWith(QLatin1String("Tuya_COVD DS82")))
{
lift = 100 - lift;
}
bool open = lift < 100;
lightNode->setValue(RStateLift, lift);
lightNode->setValue(RStateOpen, open);
quint8 level = lift * 254 / 100;
bool on = level > 0;
lightNode->setValue(RStateBri, level);
lightNode->setValue(RStateOn, on);
}
break;
case 0x0405: // rotation direction
{
DBG_Printf(DBG_INFO, "Tuya debug 3 : Covering motor direction %d\n", data);
}
break;
//other
default:
break;
}
}
//siren
else if (productId == QLatin1String("NAS-AB02B0 Siren"))
{
if (dp == 0x0168)
{
if (data == 0x00)
{
lightNode->setValue(RStateAlert, QString("none"));
}
else
{
lightNode->setValue(RStateAlert, QString("lselect"));
}
update = true;
}
}
else
{
// Switch device 1/2/3 gangs or dimmer
switch (dp)
{
// State
case 0x0101:
case 0x0102:
case 0x0103:
{
bool onoff = (data == 0) ? false : true;
{
uint ep = 0x01;
if (dp == 0x0102) { ep = 0x02; }
if (dp == 0x0103) { ep = 0x03; }
LightNode *lightNode2 = lightNode;
lightNode = getLightNodeForAddress(ind.srcAddress(), ep);
if (!lightNode)
{
return;
}
//Find model id if missing (modelId().isEmpty ?) and complete it
if (lightNode->modelId().isNull() || lightNode->manufacturer().isNull())
{
DBG_Printf(DBG_INFO, "Tuya debug 10 : Updating model ID\n");
if (!lightNode2->modelId().isNull())
{
lightNode->setModelId(lightNode2->modelId());
}
if (lightNode2->manufacturer().startsWith(QLatin1String("_T")))
{
lightNode->setManufacturerName(lightNode2->manufacturer());
}
}
ResourceItem *item = lightNode->item(RStateOn);
if (item && item->toBool() != onoff)
{
item->setValue(onoff);
Event e(RLights, RStateOn, lightNode->id(), item);
enqueueEvent(e);
update = true;
}
}
}
break;
// Dimmer level for mode 1
case 0x0202:
{
if (productId == QLatin1String("Tuya_DIMSWITCH Earda Dimmer") ||
productId == QLatin1String("Tuya_DIMSWITCH MS-105Z") ||
productId == QLatin1String("Tuya_DIMSWITCH EDM-1ZAA-EU"))
{
const qint64 bri = data * 254 / 1000; // 0 to 1000 value
ResourceItem *item = lightNode->item(RStateBri);
if (item && item->toNumber() != bri)
{
item->setValue(bri);
Event e(RLights, RStateBri, lightNode->id(), item);
enqueueEvent(e);
update = true;
}
}
}
break;
// Dimmer level for mode 2
case 0x0203:
{
if (productId == QLatin1String("Tuya_DIMSWITCH Not model found yet"))
{
const qint64 bri = data * 254 / 1000; // 0 to 1000 value
ResourceItem *item = lightNode->item(RStateBri);
if (item && item->toNumber() != bri)
{
item->setValue(bri);
Event e(RLights, RStateBri, lightNode->id(), item);
enqueueEvent(e);
update = true;
}
}
}
break;
//other
default:
break;
}
}
}
else if (sensorNode)
{
//Special part just for siren
if (productId == QLatin1String("NAS-AB02B0 Siren")) //siren
{
switch (dp)
{
case 0x0171: // Alarm siren temperature
{
ResourceItem *item = sensorNode->item(RConfigPreset);
if (item)
{
QString mode;
if (data == 0)
{
if (item->toString() == "both")
{
mode = QLatin1String("humidity");
}
else
{
mode = QLatin1String("off");
}
}
else if (data == 1)
{
if (item->toString() == "humidity")
{
mode = QLatin1String("both");
}
else
{
mode = QLatin1String("temperature");
}
}
else
{
return;
}
if (item->toString() != mode)
{
update = true;
item->setValue(mode);
Event e(RSensors, RConfigPreset, sensorNode->id(), item);
enqueueEvent(e);
}
}
}
break;
case 0x0172: // Alarm siren humidity
{
ResourceItem *item = sensorNode->item(RConfigPreset);
if (item)
{
QString mode;
if (data == 0)
{
if (item->toString() == "both")
{
mode = QLatin1String("temperature");
}
else
{
mode = QLatin1String("off");
}
}
else if (data == 1)
{
if (item->toString() == "temperature")
{
mode = QLatin1String("both");
}
else
{
mode = QLatin1String("humidity");
}
}
else
{
return;
}
if (item->toString() != mode)
{
update = true;
item->setValue(mode);
Event e(RSensors, RConfigPreset, sensorNode->id(), item);
enqueueEvent(e);
}
}
}
break;
case 0x0269: // siren temperature
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10 + 200;
ResourceItem *item = sensorNode->item(RStateTemperature);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RStateTemperature, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x026A : // Siren Humidity
{
qint16 Hum = static_cast<qint16>(data & 0xFFFF) * 100;
ResourceItem *item = sensorNode->item(RStateHumidity);
if (item && item->toNumber() != Hum)
{
item->setValue(Hum);
Event e(RSensors, RStateHumidity, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x026B : // min alarm temperature threshold
{
qint8 min = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RConfigTempMinThreshold);
if (item && item->toNumber() != min)
{
item->setValue(min);
Event e(RSensors, RConfigTempMinThreshold, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x026C : // max alarm temperature threshold
{
qint8 max = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RConfigTempMaxThreshold);
if (item && item->toNumber() != max)
{
item->setValue(max);
Event e(RSensors, RConfigTempMaxThreshold, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x026D : // min alarm humidity threshold
{
qint8 min = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RConfigHumiMinThreshold);
if (item && item->toNumber() != min)
{
item->setValue(min);
Event e(RSensors, RConfigHumiMinThreshold, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x026E : // max alarm humidity threshold
{
qint8 max = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RConfigHumiMaxThreshold);
if (item && item->toNumber() != max)
{
item->setValue(max);
Event e(RSensors, RConfigHumiMaxThreshold, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x0466 : // melody
{
quint8 melody = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RConfigMelody);
if (item && item->toNumber() != melody)
{
item->setValue(melody);
enqueueEvent(Event(RSensors, RConfigMelody, sensorNode->id(), item));
update = true;
}
}
break;
case 0x0474 : // volume
{
quint8 volume = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RConfigVolume);
if (item && item->toNumber() != volume)
{
item->setValue(volume);
enqueueEvent(Event(RSensors, RConfigVolume, sensorNode->id(), item));
update = true;
}
}
break;
default:
break;
}
}
else
{
// Generic part
switch (dp)
{
case 0x0068: // window open information
{
}
break;
case 0x0101: // off / running for Moe, or state for other
{
QString mode;
if (data == 0) { mode = QLatin1String("off"); }
else if (data == 1) { mode = QLatin1String("heat"); }
else
{
return;
}
ResourceItem *item = sensorNode->item(RConfigMode);
if (item && item->toString() != mode)
{
item->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item));
}
}
break;
case 0x0104: // Boost on Moes
{
if (productId == "Tuya_THD BRT-100")
{
QString preset;
if (data == 0) { preset = QLatin1String("manual"); } //stop boosting
else { preset = QLatin1String("boost"); } //start boosting
ResourceItem *item = sensorNode->item(RConfigPreset);
if (item && item->toString() != preset && preset == QLatin1String("boost"))
{
// only change preset if it's not boosting or was boosting before
if (preset == QLatin1String("boost") || item->toString() == QLatin1String("boost"))
{
item->setValue(preset);
enqueueEvent(Event(RSensors, RConfigPreset, sensorNode->id(), item));
}
}
}
}
break;
case 0x0107 : // Childlock status
{
bool locked = (data == 0) ? false : true;
ResourceItem *item = sensorNode->item(RConfigLocked);
if (item && item->toBool() != locked)
{
item->setValue(locked);
Event e(RSensors, RConfigLocked, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x0108 : // Woox test alarm
{
bool fire = (data == 0) ? false : true;
ResourceItem *item = sensorNode->item(RStateFire);
if (item && item->toBool() != fire)
{
item->setValue(fire);
Event e(RSensors, RStateFire, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x010D : // Childlock status for BRT-100
{
bool locked = (data == 0) ? false : true;
ResourceItem *item = sensorNode->item(RConfigLocked);
if (item && item->toBool() != locked)
{
item->setValue(locked);
Event e(RSensors, RConfigLocked, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x010E : // Woox Low Battery
{
bool lowbat = (data == 0) ? false : true;
ResourceItem *item = sensorNode->item(RStateLowBattery);
if (item && item->toBool() != lowbat)
{
item->setValue(lowbat);
Event e(RSensors, RStateLowBattery, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x0112 : // Window open status
{
bool winopen = (data == 0) ? false : true;
ResourceItem *item = sensorNode->item(RConfigWindowOpen);
if (item && item->toBool() != winopen)
{
item->setValue(winopen);
Event e(RSensors, RConfigWindowOpen, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x0114: // Valve state report : on / off
{
bool onoff = false;
if (data == 1) { onoff = true; }
ResourceItem *item = sensorNode->item(RConfigSetValve);
if (item && item->toBool() != onoff)
{
item->setValue(onoff);
Event e(RSensors, RConfigSetValve, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x011E :
case 0x0128 : // Childlock status for moe
{
bool locked = (data == 0) ? false : true;
ResourceItem *item = sensorNode->item(RConfigLocked);
if (item && item->toBool() != locked)
{
item->setValue(locked);
Event e(RSensors, RConfigLocked, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x0165: // off / on > [off = off, on = heat] for Saswell devices
{
QString mode;
if (data == 0) { mode = QLatin1String("off"); }
else if (data == 1) { mode = QLatin1String("auto"); }
else
{
return;
}
ResourceItem *item = sensorNode->item(RConfigMode);
if (item && item->toString() != mode &&
(mode == QLatin1String("off") || item->toString() == QLatin1String("off"))) // Only change if the state is off or become off
{
item->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item));
update = true;
}
}
break;
case 0x016A: // Away mode for Saswell
{
//bool away = false;
//if (data == 1) { away = true; }
}
break;
case 0x016c: // manual / auto : Schedule mode for Saswell devices
{
ResourceItem *item = sensorNode->item(RConfigMode);
if (item)
{
QString mode;
if (data == 0) { mode = QLatin1String("heat"); } // can be "off" or "heat"
else if (data == 1) { mode = QLatin1String("auto"); } // "auto" for sure
else
{
return;
}
if (item->toString() != mode &&
(mode == QLatin1String("auto") || item->toString() == QLatin1String("auto"))) // Only change if the state is auto or become auto
{
item->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item));
update = true;
}
}
}
break;
case 0x016E: // Low battery
{
bool bat = false;
if (data == 1) { bat = true; }
ResourceItem *item = sensorNode->item(RStateLowBattery);
if (item && item->toBool() != bat)
{
item->setValue(bat);
Event e(RSensors, RStateLowBattery, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x0170: // Reporting
{
DBG_Printf(DBG_INFO, "Tuya device 0x%016llX reporting status state : %d\n", ind.srcAddress().ext(), data);
}
break;
case 0x0202: // Thermostat heatsetpoint
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
if (productId == "Tuya_THD BRT-100")
{
temp = temp * 10;
//change the mode too ? only if temp <5°C change it to off
ResourceItem *item = sensorNode->item(RConfigMode);
if (temp <= 500) {
QString mode = QLatin1String("off");
if (item && item->toString() != mode)
{
item->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item));
}
}
}
ResourceItem *item = sensorNode->item(RConfigHeatSetpoint);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
enqueueEvent(Event(RSensors, RConfigHeatSetpoint, sensorNode->id(), item));
update = true;
}
}
break;
case 0x0203: // Thermostat current temperature
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
ResourceItem *item = sensorNode->item(RStateTemperature);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RStateTemperature, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x0210: // Thermostat heatsetpoint for moe
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 100;
if (productId == "Tuya_THD MOES TRV")
{
temp = static_cast<qint16>(data & 0xFFFF) * 100 / 2;
}
ResourceItem *item = sensorNode->item(RConfigHeatSetpoint);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RConfigHeatSetpoint, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x020E: // battery
case 0x0215: // battery
{
quint8 bat = static_cast<qint8>(data & 0xFF);
if (bat > 100) { bat = 100; }
ResourceItem *item = sensorNode->item(RConfigBattery);
if (!item && bat > 0) // valid value: create resource item
{
item = sensorNode->addItem(DataTypeUInt8, RConfigBattery);
}
if (item && item->toNumber() != bat)
{
item->setValue(bat);
Event e(RSensors, RConfigBattery, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x0218: // Thermostat current temperature for moe
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
ResourceItem *item = sensorNode->item(RStateTemperature);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RStateTemperature, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x021B : // temperature calibration (offset in degree) for Moes and Saswell
{
qint16 temp = static_cast<qint16>(data & 0xFFFF);
if (productId == "Tuya_THD BTH-002 Thermostat") // Only Moes
{
if (temp > 2048)
{
temp = temp - 4096;
}
}
temp = temp * 100;
ResourceItem *item = sensorNode->item(RConfigOffset);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RConfigOffset, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x022c : // temperature calibration (offset in degree)
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
ResourceItem *item = sensorNode->item(RConfigOffset);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RConfigOffset, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
case 0x0266: // min temperature limit
{
//Can be Temperature for some device
if (productId == "Tuya_THD SEA801-ZIGBEE TRV" ||
productId == "Tuya_THD Smart radiator TRV" ||
productId == "Tuya_THD WZB-TRVL TRV")
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
ResourceItem *item = sensorNode->item(RStateTemperature);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RStateTemperature, sensorNode->id(), item);
enqueueEvent(e);
}
}
}
break;
case 0x0267: // max temperature limit
{
//can be setpoint for some device
if (productId == "Tuya_THD SEA801-ZIGBEE TRV" ||
productId == "Tuya_THD Smart radiator TRV" ||
productId == "Tuya_THD WZB-TRVL TRV")
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
ResourceItem *item = sensorNode->item(RConfigHeatSetpoint);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RConfigHeatSetpoint, sensorNode->id(), item);
enqueueEvent(e);
}
}
}
break;
case 0x0268 : // Valve position in % for Moe
{
quint8 valve = static_cast<qint8>(data & 0xFF);
ResourceItem *item = sensorNode->item(RStateValve);
if (item && item->toNumber() != valve)
{
item->setValue(valve);
enqueueEvent(Event(RSensors, RStateValve, sensorNode->id(), item));
}
}
break;
case 0x0269: // Boost time in second or Heatpoint
{
if (productId == "Tuya_THD MOES TRV")
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 100 / 2;
ResourceItem *item = sensorNode->item(RConfigHeatSetpoint);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RConfigHeatSetpoint, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
}
break;
case 0x026B: // Temperature for Multi sensor
{
if (productId == "Tuya_SEN Multi-sensor")
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 10;
ResourceItem *item = sensorNode->item(RStateTemperature);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RStateTemperature, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
}
break;
case 0x026C: // Humidity
{
qint16 temp = static_cast<qint16>(data & 0xFFFF) * 100;
ResourceItem *item = sensorNode->item(RStateHumidity);
if (item && item->toNumber() != temp)
{
item->setValue(temp);
Event e(RSensors, RStateHumidity, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x026D : // Valve position in %
{
quint8 valve = static_cast<qint8>(data & 0xFF);
bool on = valve > 3;
ResourceItem *item = sensorNode->item(RStateOn);
if (item)
{
if (item->toBool() != on)
{
item->setValue(on);
enqueueEvent(Event(RSensors, RStateOn, sensorNode->id(), item));
}
}
item = sensorNode->item(RStateValve);
if (item && item->toNumber() != valve)
{
item->setValue(valve);
enqueueEvent(Event(RSensors, RStateValve, sensorNode->id(), item));
}
}
break;
case 0x0401: // Preset for Moes or Alamr for Woox
if (productId == "Tuya_OTH R7049 Smoke Alarm")
{
bool fire = (data == 0) ? true : false;
ResourceItem *item = sensorNode->item(RStateFire);
if (item && item->toBool() != fire)
{
item->setValue(fire);
Event e(RSensors, RStateFire, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
else if (productId == "Tuya_THD BRT-100")
{
QString mode;
QString preset;
if (data == 0) { //programming
mode = QLatin1String("auto");
preset = QLatin1String("auto");
}
else if (data == 1) { //manual
mode = QLatin1String("heat");
preset = QLatin1String("manual");
}
else if (data == 2) { //temporary_manual
mode = QLatin1String("heat");
preset = QLatin1String("manual");
}
//temporary_manual
else if (data == 3) { //holiday
mode = QLatin1String("auto");
preset = QLatin1String("holiday");
}
else
{
return;
}
ResourceItem *item_mode = sensorNode->item(RConfigMode);
if (item_mode && item_mode->toString() != mode)
{
item_mode->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item_mode));
}
ResourceItem *item_preset = sensorNode->item(RConfigPreset);
if (item_preset && item_preset->toString() != preset)
{
item_preset->setValue(preset);
enqueueEvent(Event(RSensors, RConfigPreset, sensorNode->id(), item_preset));
}
}
break;
case 0x0402 : // preset for moe or mode
case 0x0403 : // preset for moe
{
if (productId == "Tuya_THD MOES TRV")
{
QString mode;
if (data == 0) { mode = QLatin1String("auto"); } //schedule
else if (data == 1) { mode = QLatin1String("heat"); } //manual
else if (data == 2) { mode = QLatin1String("off"); } //away
else
{
return;
}
ResourceItem *item = sensorNode->item(RConfigMode);
if (item && item->toString() != mode)
{
item->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item));
}
}
else
{
QString preset;
if (dp == 0x0402) { preset = QLatin1String("auto"); }
else if (dp == 0x0403) { preset = QLatin1String("program"); }
else
{
return;
}
ResourceItem *item = sensorNode->item(RConfigPreset);
if (item && item->toString() != preset)
{
item->setValue(preset);
enqueueEvent(Event(RSensors, RConfigPreset, sensorNode->id(), item));
}
}
}
break;
case 0x0404 : // preset
{
QString preset;
if (data == 0) { preset = QLatin1String("holiday"); }
else if (data == 1) { preset = QLatin1String("auto"); }
else if (data == 2) { preset = QLatin1String("manual"); }
else if (data == 3) { preset = QLatin1String("comfort"); }
else if (data == 4) { preset = QLatin1String("eco"); }
else if (data == 5) { preset = QLatin1String("boost"); }
else if (data == 6) { preset = QLatin1String("complex"); }
else
{
return;
}
ResourceItem *item = sensorNode->item(RConfigPreset);
if (item && item->toString() != preset)
{
item->setValue(preset);
enqueueEvent(Event(RSensors, RConfigPreset, sensorNode->id(), item));
}
}
break;
case 0x0407 : // valve open / closed for Moes
{
bool on = data < 0x01; // 0x01 = off, 0x00 = on
ResourceItem *item = sensorNode->item(RStateOn);
if (item)
{
if (item->toBool() != on)
{
item->setValue(on);
enqueueEvent(Event(RSensors, RStateOn, sensorNode->id(), item));
}
}
}
break;
case 0x040E: // Low battery
{
// 2 above 2,8v
// 1 above 2.6v
// 0 at 2.6v and below (beeps ocassionally)
bool lowbat = true;
if (data == 2) { lowbat = false; }
ResourceItem *item = sensorNode->item(RStateLowBattery);
if (item && item->toBool() != lowbat)
{
item->setValue(lowbat);
Event e(RSensors, RStateLowBattery, sensorNode->id(), item);
enqueueEvent(e);
update = true;
}
}
break;
case 0x046a : // Force mode : normal/open/close
{
QString mode;
if (data == 0) { mode = QLatin1String("auto"); }
else if (data == 1) { mode = QLatin1String("heat"); }
else if (data == 2) { mode = QLatin1String("off"); }
else
{
return;
}
ResourceItem *item = sensorNode->item(RConfigMode);
if (item && item->toString() != mode)
{
item->setValue(mode);
enqueueEvent(Event(RSensors, RConfigMode, sensorNode->id(), item));
}
}
break;
case 0x0569 : // Low battery
{
bool bat = false;
if (data == 1) { bat = true; }
ResourceItem *item = sensorNode->item(RStateLowBattery);
if (item && item->toBool() != bat)
{
item->setValue(bat);
Event e(RSensors, RStateLowBattery, sensorNode->id(), item);
enqueueEvent(e);
}
}
break;
default:
break;
}
}
}
else
{
DBG_Printf(DBG_INFO, "Tuya debug 6 : No device found\n");
}
}
else
{
return;
}
if (update)
{
if (lightNode)
{
// Update Node light
updateLightEtag(&*lightNode);
lightNode->setNeedSaveDatabase(true);
saveDatabaseItems |= DB_LIGHTS;
}
if (sensorNode)
{
updateSensorEtag(&*sensorNode);
sensorNode->updateStateTimestamp();
enqueueEvent(Event(RSensors, RStateLastUpdated, sensorNode->id()));
sensorNode->setNeedSaveDatabase(true);
}
}
}
bool DeRestPluginPrivate::sendTuyaRequestThermostatSetWeeklySchedule(TaskItem &taskRef, quint8 weekdays, const QString &transitions, qint8 Dp_identifier)
{
QByteArray data;
const QStringList list = transitions.split("T", SKIP_EMPTY_PARTS);
quint8 hh;
quint8 mm;
quint8 heatSetpoint;
if (Dp_identifier == DP_IDENTIFIER_THERMOSTAT_SCHEDULE_1)
{
//To finish
}
else if (Dp_identifier == DP_IDENTIFIER_THERMOSTAT_SCHEDULE_4)
{
//To finish
}
else
{
if (weekdays == 3)
{
Dp_identifier = DP_IDENTIFIER_THERMOSTAT_SCHEDULE_3;
}
if (list.size() != 6)
{
DBG_Printf(DBG_INFO, "Tuya : Schedule command error, need to have 6 values\n");
}
}
for (const QString &entry : list)
{
QStringList attributes = entry.split("|");
if (attributes.size() != 2)
{
return false;
}
hh = attributes.at(0).mid(0, 2).toUInt();
mm = attributes.at(0).mid(3, 2).toUInt();
heatSetpoint = attributes.at(1).toInt();
data.append(QByteArray::number(hh, 16));
data.append(QByteArray::number(mm, 16));
data.append(QByteArray::number(heatSetpoint, 16));
}
return sendTuyaRequest(taskRef, TaskThermostat, DP_TYPE_RAW, Dp_identifier, data);
}
bool DeRestPluginPrivate::sendTuyaRequest(deCONZ::Address srcAddress, quint8 srcEndpoint, qint8 Dp_type, qint8 Dp_identifier, const QByteArray &data)
{
TaskItem task;
task.req.dstAddress() = srcAddress;
task.req.setTxOptions(deCONZ::ApsTxAcknowledgedTransmission);
task.req.setDstAddressMode(deCONZ::ApsExtAddress);
task.req.setDstEndpoint(srcEndpoint);
task.req.setSrcEndpoint(endpoint());
return sendTuyaRequest(task, TaskTuyaRequest, Dp_type, Dp_identifier, data);
}
//
// Tuya Devices
//
bool DeRestPluginPrivate::sendTuyaRequest(TaskItem &taskRef, TaskType taskType, qint8 Dp_type, qint8 Dp_identifier, const QByteArray &data)
{
DBG_Printf(DBG_INFO, "Send Tuya request 0x%016llX : Dp_type: 0x%02X, Dp_identifier 0x%02X, data: %s\n", taskRef.req.dstAddress().ext(), Dp_type, Dp_identifier, qPrintable(data.toHex()));
const quint8 seq = zclSeq++;
TaskItem task;
copyTaskReq(taskRef, task);
//Tuya task
task.taskType = taskType;
task.req.setClusterId(TUYA_CLUSTER_ID);
task.req.setProfileId(HA_PROFILE_ID);
task.zclFrame.payload().clear();
task.zclFrame.setSequenceNumber(seq);
task.zclFrame.setCommandId(0x00); // Command 0x00
task.zclFrame.setFrameControl(deCONZ::ZclFCClusterCommand | deCONZ::ZclFCDirectionClientToServer | deCONZ::ZclFCDisableDefaultResponse);
// payload
QDataStream stream(&task.zclFrame.payload(), QIODevice::WriteOnly);
stream.setByteOrder(QDataStream::LittleEndian); // TODO(mpi): should be big endian for Tuya
stream << static_cast<qint8>(0x00); // Status always 0x00
stream << static_cast<qint8>(seq); // TransID, use seq
stream << static_cast<qint8>(Dp_identifier); // Dp_indentifier
stream << static_cast<qint8>(Dp_type); // Dp_type
// TODO(mpi): there is no Fn field, length is 16-bit and big endian, that's why the first byte is always 0x00
stream << static_cast<qint8>(0x00); // Fn, always 0
// Data
// TODO(mpi): we should replace QByteArray data with int and write data and length according Dp_type
stream << static_cast<qint8>(data.length()); // length (can be 0 for Dp_identifier = enums)
for (int i = 0; i < data.length(); i++)
{
stream << static_cast<quint8>(data[i]);
}
{ // ZCL frame
task.req.asdu().clear(); // cleanup old request data if there is any
QDataStream stream(&task.req.asdu(), QIODevice::WriteOnly);
stream.setByteOrder(QDataStream::LittleEndian);
task.zclFrame.writeToStream(stream);
}
if (!addTask(task))
{
return false;
}
processTasks();
return true;
}
bool DeRestPluginPrivate::sendTuyaCommand(const deCONZ::ApsDataIndication &ind, qint8 commandId, const QByteArray &data)
{
DBG_Printf(DBG_INFO, "Send Tuya command 0x%02X, data: %s\n", commandId, qPrintable(data.toHex()));
TaskItem task;
//Tuya task
task.taskType = TaskTuyaRequest;
task.req.dstAddress() = ind.srcAddress();
task.req.setDstAddressMode(deCONZ::ApsExtAddress);
task.req.setDstEndpoint(ind.srcEndpoint());
task.req.setSrcEndpoint(endpoint());
task.req.setClusterId(TUYA_CLUSTER_ID);
task.req.setProfileId(HA_PROFILE_ID);
task.zclFrame.payload().clear();
task.zclFrame.setSequenceNumber(zclSeq++);
task.zclFrame.setCommandId(commandId); // Command
task.zclFrame.setFrameControl(deCONZ::ZclFCClusterCommand |
deCONZ::ZclFCDirectionClientToServer |
deCONZ::ZclFCDisableDefaultResponse);
// payload
QDataStream stream(&task.zclFrame.payload(), QIODevice::WriteOnly);
stream.setByteOrder(QDataStream::LittleEndian);
// Data
for (int i = 0; i < data.length(); i++)
{
stream << static_cast<quint8>(data[i]);
}
{ // ZCL frame
task.req.asdu().clear(); // cleanup old request data if there is any
QDataStream stream(&task.req.asdu(), QIODevice::WriteOnly);
stream.setByteOrder(QDataStream::LittleEndian);
task.zclFrame.writeToStream(stream);
}
if (!addTask(task))
{
DBG_Printf(DBG_INFO, "Failed to send Tuya command 0x%02X, data: %s\n", commandId, qPrintable(data.toHex()));
return false;
}
processTasks();
return true;
}