nuttx/arch/arm/src/lpc2378/chip.h-代码预览-nuttx:基于 POSIX/ANSI 标准的实时操作系统项目 - AtomGit

Oopenvela-robotMerge remote-tracking branch 'mirtos/master' into dev-upmerge-nuttx-10.1-0507
/****************************************************************************
 * arch/arm/src/lpc2378/chip.h
 *
 *   Copyright (C) 2010 Rommel Marcelo. All rights reserved.
 *   Author: Rommel Marcelo
 *
 * This file is part of the NuttX RTOS and based on the lpc2148 port:
 *
 *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *  notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *  notice, this list of conditions and the following disclaimer in
 *  the documentation and/or other materials provided with the
 *  distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *  used to endorse or promote products derived from this software
 *  without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#ifndef __ARCH_ARM_SRC_LPC2378_CHIP_H
#define __ARCH_ARM_SRC_LPC2378_CHIP_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <sys/types.h>

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* Memory Map ***************************************************************/

#define LPC23XX_FLASH_BASE          0x00000000
#define LPC23XX_FIO_BASE            0x3fffc000
#define LPC23XX_ONCHIP_RAM_BASE     0x40000000
#define LPC23XX_USBDMA_RAM_BASE     0x7fd00000
#define LPC23XX_ETHERNET_RAM_BASE   0x7fe00000
#define LPC23XX_BOOT_BLOCK          0x7fffd000
#define LPC23XX_EXTMEM_BASE         0x80000000
#define LPC23XX_APB_BASE            0xe0000000
#define LPC23XX_AHB_BASE            0xf0000000

/* Peripheral Registers *****************************************************/

/* APB Register block base addresses */

#define LPC23XX_WD_BASE             0xe0000000  /* Watchdog base address */
#define LPC23XX_TMR0_BASE           0xE0004000  /* Timer 0 base address*/
#define LPC23XX_TMR1_BASE           0xe0008000  /* Timer 1 base address */
#define LPC23XX_UART0_BASE          0xe000c000  /* UART0 base address */
#define LPC23XX_UART1_BASE          0xe0010000  /* UART1 base address */
#define LPC23XX_PWM_BASE            0xe0018000  /* Pulse width modulator (PWM) base address */
#define LPC23XX_I2C0_BASE           0xe001c000  /* I2C0 base address */
#define LPC23XX_SPI0_BASE           0xe0020000  /* Serial Peripheral Interface 0 (SPI0) base */
#define LPC23XX_RTC_BASE            0xe0024000  /* Real Time Clock (RTC) base address */
#define LPC23XX_GPIO0_BASE          0xe0028000  /* General Purpose I/O (GPIO) 0 base address */
#define LPC23XX_GPIO1_BASE          0xe0028010  /* General Purpose I/O (GPIO) 1 base address */
#define LPC23XX_PINSEL_BASE         0xe002c000  /* Pin function select registers */
#define LPC23XX_SSP1_BASE           0xe0030000  /* Synchronous Serial Port 1 base address */
#define LPC23XX_AD0_BASE            0xe0034000  /* Analog to Digital Converter 0 base address*/

/* #define LPC23XX_CAN_ACCEPT_RAM_BASE 0xe0038000
 * CAN Acceptance Filter RAM base address
 */
#define LPC23XX_CAN_ACCEPT_BASE     0xE003C000  /* CAN Acceptance Filter Register base address*/
#define LPC23XX_CAN_COMMON_BASE     0xe0040000  /* CAN Common Register base address*/
#define LPC23XX_CAN1_BASE           0xe0044000  /* CAN 1 Controller base address*/
#define LPC23XX_CAN2_BASE           0xe0048000  /* CAN 2 Controller base address*/
#define LPC23XX_I2C1_BASE           0xe005c000  /* I2C1 base address */
#define LPC23XX_SSP0_BASE           0xE0068000  /* Synchronous Serial Port 0 base address */
#define LPC23XX_DAC_BASE            0xE006C000  /* DAC base address */
#define LPC23XX_TMR2_BASE           0xE0070000  /* Timer 2 base address */
#define LPC23XX_TMR3_BASE           0xE0074000  /* Timer 3 base address */
#define LPC23XX_UART2_BASE          0xE0078000  /* UART2 base address */
#define LPC23XX_UART3_BASE          0xE007C000  /* UART3 base address */
#define LPC23XX_I2C2_BASE           0xE0080000  /* I2C2 base address */
#define LPC23XX_BATT_RAM_BASE       0xE0084000  /* Battery RAM base address */
#define LPC23XX_I2S_BASE            0xE0088000  /* I2S base address */
#define LPC23XX_MCI_BASE            0xE008C000  /* SD/MMC Card Interface base address */

/* #define LPC23XX_SPI1_BASE       0xe0068000
 * Serial Peripheral Interface 1 (SPI1) base
 */
#define LPC23XX_EMAC_BASE           0xFFE00000  /* Ethernet MAC base address */
#define LPC23XX_USB_BASE            0xFFE0C200  /* USB base address */
#define LPC23XX_SCB_BASE            0xE01FC000  /* System Control Block (SBC) base address */
#define LPC23XX_EXT_BASE            0xe01fc140  /* External Interrupt base address */

/* AHB Register block base addresses */

#define LPC23XX_EMC_BASE            0xFFE08000  /* External Memory Controller (EMC) base address */
#define LPC23XX_VIC_BASE            0xFFFFF000  /* Vectored Interrupt Controller (VIC) Base */
#define LPC23XX_GPDMA_BASE          0xFFE04000  /* General Purpose DMA */

/* Watchdog Register Offsets */
#define WD_MOD_OFFSET               0x00  /* Watchdog Mode Register */
#define WD_TC_OFFSET                0x04  /* Watchdog Time Constant Register */
#define WD_FEED_OFFSET              0x08  /* Watchdog Feed Register */
#define WD_TV_OFFSET                0x0C  /* Watchdog Time Value Register */

/* Timers Base Addresses */
#define TMR0_BASE_ADDR              0xE0004000
#define TMR1_BASE_ADDR              0xE0008000
#define TMR2_BASE_ADDR              0xE0070000
#define TMR3_BASE_ADDR              0xE0074000

/* Timer 0/1/2/3 register offsets */

#define TMR_IR_OFFSET               0x00  /* RW:Interrupt Register */
#define TMR_TCR_OFFSET              0x04  /* RW: Timer Control Register */
#define TMR_TC_OFFSET               0x08  /* RW: Timer Counter */
#define TMR_PR_OFFSET               0x0c  /* RW: Prescale Register */
#define TMR_PC_OFFSET               0x10  /* RW: Prescale Counter Register */
#define TMR_MCR_OFFSET              0x14  /* RW: Match Control Register */
#define TMR_MR0_OFFSET              0x18  /* RW: Match Register 0 */
#define TMR_MR1_OFFSET              0x1c  /* RW: Match Register 1 */
#define TMR_MR2_OFFSET              0x20  /* RW: Match Register 2 */
#define TMR_MR3_OFFSET              0x24  /* RW: Match Register 3 */
#define TMR_CCR_OFFSET              0x28  /* RW: Capture Control Register */
#define TMR_CR0_OFFSET              0x2c  /* R: Capture Register 0 */
#define TMR_CR1_OFFSET              0x30  /* R: Capture Register 1 */
#define TMR_CR2_OFFSET              0x34  /* R: Capture Register 2 */
#define TMR_CR3_OFFSET              0x38  /* RW: Capture Register 3 */
#define TMR_EMR_OFFSET              0x3c  /* RW: External Match Register */
#define TMR_CTCR_OFFSET             0x70  /* RW: Count Control Register */

/* Universal Asynchronous Receiver Transmitter Base Addresses */

#define UART0_BASE_ADDR             0xE000C000
#define UART1_BASE_ADDR             0xE0010000
#define UART2_BASE_ADDR             0xE0078000
#define UART3_BASE_ADDR             0xE007C000

/* UART 0/1/2/3 Register Offsets */

#define UART_RBR_OFFSET             0x00  /* R: Receive Buffer Register (DLAB=0) */
#define UART_THR_OFFSET             0x00  /* W: Transmit Holding Register (DLAB=0) */
#define UART_DLL_OFFSET             0x00  /* W: Divisor Latch Register (LSB, DLAB=1) */
#define UART_IER_OFFSET             0x04  /* W: Interrupt Enable Register (DLAB=0) */
#define UART_DLM_OFFSET             0x04  /* RW: Divisor Latch Register (MSB, DLAB=1) */
#define UART_IIR_OFFSET             0x08  /* R: Interrupt ID Register */
#define UART_FCR_OFFSET             0x08  /* W: FIFO Control Register */
#define UART_LCR_OFFSET             0x0c  /* RW: Line Control Register */
#define UART_MCR_OFFSET             0x10  /* RW: Modem Control REgister (2146/6/8 UART1 Only) */
#define UART_LSR_OFFSET             0x14  /* R: Scratch Pad Register */
#define UART_MSR_OFFSET             0x18  /* RW: MODEM Status Register (2146/6/8 UART1 Only) */
#define UART_SCR_OFFSET             0x1c  /* RW: Line Status Register */
#define UART_ACR_OFFSET             0x20  /* RW: Autobaud Control Register */
#define UART_FDR_OFFSET             0x28  /* RW: Fractional Divider Register */
#define UART_TER_OFFSET             0x30  /* RW: Transmit Enable Register */

/* Pulse Width Modulation Base Address */

#define PWM1_BASE_ADDR              0xE0018000

/* PWM register offsets */

#define PWM_IR_OFFSET               0x00  /* Interrupt Register */
#define PWM_TCR_OFFSET              0x04  /* Timer Control Register */
#define PWM_TC_OFFSET               0x08  /* Timer Counter */
#define PWM_PR_OFFSET               0x0c  /* Prescale Register */
#define PWM_PC_OFFSET               0x10  /* Prescale Counter Register */
#define PWM_MCR_OFFSET              0x14  /* Match Control Register */
#define PWM_MR0_OFFSET              0x18  /* Match Register 0 */
#define PWM_MR1_OFFSET              0x1c  /* Match Register 1 */
#define PWM_MR2_OFFSET              0x20  /* Match Register 2 */
#define PWM_MR3_OFFSET              0x24  /* Match Register 3 */
#define PWM_CCR_OFFSET              0x28  /* Capture Control Register*/
#define PWM_CCR0_OFFSET             0x2C  /* Capture Register 0 */
#define PWM_CCR1_OFFSET             0x30  /* Capture Register 1 */
#define PWM_CCR2_OFFSET             0x34  /* Capture Register 2 */
#define PWM_CCR3_OFFSET             0x38  /* Capture Register 3 */
#define PWM_EMR_OFFSET              0x3C  /* */
#define PWM_MR4_OFFSET              0x40  /* Match Register 4 */
#define PWM_MR5_OFFSET              0x44  /* Match Register 5 */
#define PWM_MR6_OFFSET              0x48  /* Match Register 6 */
#define PWM_PCR_OFFSET              0x4c  /* Control Register */
#define PWM_LER_OFFSET              0x50  /* Latch Enable Register */
#define PWM_CTCR_OFFSET             0x70

/* I2C Base Addresses */

#define I2C0_BASE_ADDR              0xE001C000
#define I2C1_BASE_ADDR              0xE005C000
#define I2C2_BASE_ADDR              0xE0080000

/* I2C 0/1/2 register offsets */

#define I2C_CONSET_OFFSET           0x00  /* Control Set Register */
#define I2C_STAT_OFFSET             0x04  /* Status Register */
#define I2C_DAT_OFFSET              0x08  /* Data Register */
#define I2C_ADR_OFFSET              0x0c  /* Slave Address Register */
#define I2C_SCLH_OFFSET             0x10  /* SCL Duty Cycle Register (high half word) */
#define I2C_SCLL_OFFSET             0x14  /* SCL Duty Cycle Register (low half word) */
#define I2C_CONCLR_OFFSET           0x18  /* Control Clear Register */

/* Pin function select register offsets */

#define PINSEL0_OFFSET              0x00  /* Pin function select register 0 */
#define PINSEL1_OFFSET              0x04  /* Pin function select register 1 */
#define PINSEL2_OFFSET              0x08  /* Pin function select register 2 */
#define PINSEL3_OFFSET              0x0C  /* Pin function select register 3 */
#define PINSEL4_OFFSET              0x10  /* Pin function select register 4 */
#define PINSEL5_OFFSET              0x14  /* Pin function select register 5 */
#define PINSEL6_OFFSET              0x18  /* Pin function select register 6 */
#define PINSEL7_OFFSET              0x1C  /* Pin function select register 7 */
#define PINSEL8_OFFSET              0x20  /* Pin function select register 8 */
#define PINSEL9_OFFSET              0x24  /* Pin function select register 9 */
#define PINSEL10_OFFSET             0x28  /* Pin function select register 10 */

/* Analog to Digital (AD) Base Address */

#define ADC0_BASE_ADDR              0xE0034000

/* Analog to Digital (AD) Converter register offsets */

#define AD_ADCR_OFFSET              0x00  /* A/D Control Register */
#define AD_ADGDR_OFFSET             0x04  /* A/D Global Data Register (only one common register!) */

/* #define AD_ADGSR_OFFSET         0x08      A/D Global Start Register */
#define AD_ADINTEN_OFFSET           0x0c  /* A/D Interrupt Enable Register */
#define AD_ADDR0_OFFSET             0x10  /* A/D Channel 0 Data Register */
#define AD_ADDR1_OFFSET             0x14  /* A/D Channel 0 Data Register */
#define AD_ADDR2_OFFSET             0x18  /* A/D Channel 0 Data Register */
#define AD_ADDR3_OFFSET             0x1c  /* A/D Channel 0 Data Register */
#define AD_ADDR4_OFFSET             0x20  /* A/D Channel 0 Data Register */
#define AD_ADDR5_OFFSET             0x24  /* A/D Channel 0 Data Register */
#define AD_ADDR6_OFFSET             0x28  /* A/D Channel 0 Data Register */
#define AD_ADDR7_OFFSET             0x2c  /* A/D Channel 0 Data Register */
#define AD_ADSTAT_OFFSET            0x30  /* A/D Status Register */

/* Digital to Analog (DAC) Base Address */

#define DAC_BASE_ADDR               0xE006C000

/* Digital to Analog  (DAC) register offset */

/* #define DACR_OFFSET               0x00 */

/* SPI0 register offsets */

#define SPI0_BASE_ADDR              0xE0020000

#define SPI0_CR_OFFSET              0x00  /* Control Register */
#define SPI0_SR_OFFSET              0x04  /* Status Register */
#define SPI0_DR_OFFSET              0x08  /* Data Register */
#define SPI0_CCR_OFFSET             0x0c  /* Clock Counter Register */
#define SPI0_INTF_OFFSET            0x1c  /* Interrupt Flag Register */

/* SPI1 register offsets */

/* #define SPI1_CR0_OFFSET         0x00   Control Register 0 */

/* #define SPI1_CR1_OFFSET         0x04   Control Register 1 */

/* #define SPI1_DR_OFFSET          0x08   Data Register */

/* #define SPI1_SR_OFFSET          0x0c   Status Register */

/* #define SPI1_CPSR_OFFSET        0x10   Clock Pre-Scale Regisrer */

/* #define SPI1_IMSC_OFFSET        0x14   Interrupt Mask Set and Clear
 *                                        Register
 */

/* #define SPI1_RIS_OFFSET         0x18   Raw Interrupt Status Register */

/* #define SPI1_MIS_OFFSET         0x1c   Masked Interrupt Status Register */

/* #define SPI1_ICR_OFFSET         0x20   Interrupt Clear Register */

/* SSP Base Addresses */

#define SSP0_BASE_ADDR              0xE0068000
#define SSP1_BASE_ADDR              0xE0030000

/* SSP 0/1 register offsets */

#define SSP_CR0_OFFSET              0x00  /* Control Register 0 */
#define SSP_CR1_OFFSET              0x04  /* Control Register 1 */
#define SSP_DR_OFFSET               0x08  /* Data Register */
#define SSP_SR_OFFSET               0x0C  /* Status Register*/
#define SSP_CPSR_OFFSET             0x10  /* Clock Prescale Register */
#define SSP_IMSC_OFFSET             0x14  /* Interrupt Mask Set/Clear Register */
#define SSP_RIS_OFFSET              0x18  /* Raw Interrupt Register */
#define SSP_MIS_OFFSET              0x1C  /* Masked Interrupt Status Register */
#define SSP_ICR_OFFSET              0x20  /* Interrupt Clear Register */
#define SSP_DMACR_OFFSET            0x24  /* DMA Control Register */

/* Real Time Clock Base Address */

#define RTC_BASE_ADDR               0xE0024000

/* RTC register offsets */

#define RTC_ILR_OFFSET              0x00  /* Interrupt Location Register */
#define RTC_CTC_OFFSET              0x04  /* Clock Tick Counter */
#define RTC_CCR_OFFSET              0x08  /* Clock Control Register */
#define RTC_CIIR_OFFSET             0x0c  /* Counter Increment Interrupt Register */
#define RTC_AMR_OFFSET              0x10  /* Alarm Mask Register */
#define RTC_CTIME0_OFFSET           0x14  /* Consolidated Time Register 0 */
#define RTC_CTIME1_OFFSET           0x18  /* Consolidated Time Register 1 */
#define RTC_CTIME2_OFFSET           0x1c  /* Consolidated Time Register 2 */
#define RTC_SEC_OFFSET              0x20  /* Seconds Register */
#define RTC_MIN_OFFSET              0x24  /* Minutes Register */
#define RTC_HOUR_OFFSET             0x28  /* Hours Register */
#define RTC_DOM_OFFSET              0x2c  /* Day Of Month Register */
#define RTC_DOW_OFFSET              0x30  /* Day Of Week Register */
#define RTC_DOY_OFFSET              0x34  /* Day Of Year Register */
#define RTC_MONTH_OFFSET            0x38  /* Months Register */
#define RTC_YEAR_OFFSET             0x3c  /* Years Register */

#define RTC_ALSEC_OFFSET            0x60  /* Alarm Seconds Register */
#define RTC_ALMIN_OFFSET            0x64  /* Alarm Minutes Register */
#define RTC_ALHOUR_OFFSET           0x68  /* Alarm Hours Register */
#define RTC_ALDOM_OFFSET            0x6c  /* Alarm Day Of Month Register */
#define RTC_ALDOW_OFFSET            0x70  /* Alarm Day Of Week Register */
#define RTC_ALDOY_OFFSET            0x74  /* Alarm Day Of Year Register */
#define RTC_ALMON_OFFSET            0x78  /* Alarm Months Register */
#define RTC_ALYEAR_OFFSET           0x7c  /* Alarm Years Register */
#define RTC_PREINT_OFFSET           0x80  /* Prescale Value Register (integer) */
#define RTC_PREFRAC_OFFSET          0x84  /* Prescale Value Register (fraction) */

/* Watchdog */

/* WDG_BASE_ADDR                   0xE0000000 */
#define WDMOD_OFFSET                0x00
#define WDTC_OFFSET                 0x04
#define WDFEED_OFFSET               0x08
#define WDTV_OFFSET                 0x0C
#define WDCLKSEL_OFFSET             0x10

/* CAN CONTROLLERS AND ACCEPTANCE FILTER */

/* CAN_ACCEPT_BASE_ADDR            0xE003C000 */
#define CAN_AFMR_OFFSET             0x00
#define CAN_SFF_SA_OFFSET           0x04
#define CAN_SFF_GRP_SA_OFFSET       0x08
#define CAN_EFF_SA_OFFSET           0x0C
#define CAN_EFF_GRP_SA_OFFSET       0x10
#define CAN_EOT_OFFSET              0x14
#define CAN_LUT_ERR_ADR_OFFSET      0x18
#define CAN_LUT_ERR_OFFSET          0x1C

/* CAN_COMMON_BASE_ADDR            0xE0040000 */
#define CAN_TX_SR_OFFSET            0x00
#define CAN_RX_SR_OFFSET            0x04
#define CAN_MSR_OFFSET              0x08

/* CAN1_BASE_ADDR                  0xE0044000 */
#define CAN1MOD_OFFSET              0x00
#define CAN1CMR_OFFSET              0x04
#define CAN1GSR_OFFSET              0x08
#define CAN1ICR_OFFSET              0x0C
#define CAN1IER_OFFSET              0x10
#define CAN1BTR_OFFSET              0x14
#define CAN1EWL_OFFSET              0x18
#define CAN1SR_OFFSET               0x1C
#define CAN1RFS_OFFSET              0x20
#define CAN1RID_OFFSET              0x24
#define CAN1RDA_OFFSET              0x28
#define CAN1RDB_OFFSET              0x2C

#define CAN1TFI1_OFFSET             0x30
#define CAN1TID1_OFFSET             0x34
#define CAN1TDA1_OFFSET             0x38
#define CAN1TDB1_OFFSET             0x3C
#define CAN1TFI2_OFFSET             0x40
#define CAN1TID2_OFFSET             0x44
#define CAN1TDA2_OFFSET             0x48
#define CAN1TDB2_OFFSET             0x4C
#define CAN1TFI3_OFFSET             0x50
#define CAN1TID3_OFFSET             0x54
#define CAN1TDA3_OFFSET             0x58
#define CAN1TDB3_OFFSET             0x5C

/* CAN2_BASE_ADDR                  0xE0048000 */
#define CAN2MOD_OFFSET              0x00
#define CAN2CMR_OFFSET              0x04
#define CAN2GSR_OFFSET              0x08
#define CAN2ICR_OFFSET              0x0C
#define CAN2IER_OFFSET              0x10
#define CAN2BTR_OFFSET              0x14
#define CAN2EWL_OFFSET              0x18
#define CAN2SR_OFFSET               0x1C
#define CAN2RFS_OFFSET              0x20
#define CAN2RID_OFFSET              0x24
#define CAN2RDA_OFFSET              0x28
#define CAN2RDB_OFFSET              0x2C

#define CAN2TFI1_OFFSET             0x30
#define CAN2TID1_OFFSET             0x34
#define CAN2TDA1_OFFSET             0x38
#define CAN2TDB1_OFFSET             0x3C
#define CAN2TFI2_OFFSET             0x40
#define CAN2TID2_OFFSET             0x44
#define CAN2TDA2_OFFSET             0x48
#define CAN2TDB2_OFFSET             0x4C
#define CAN2TFI3_OFFSET             0x50
#define CAN2TID3_OFFSET             0x54
#define CAN2TDA3_OFFSET             0x58
#define CAN2TDB3_OFFSET             0x5C

/* MultiMedia Card Interface(MCI) ontroller */

/* MCI_BASE_ADDR                   0xE008C000 */
#define MCI_POWER_OFFSET            0x00
#define MCI_CLOCK_OFFSET            0x04
#define MCI_ARGUMENT_OFFSET         0x08
#define MCI_COMMAND_OFFSET          0x0C
#define MCI_RESP_CMD_OFFSET         0x10
#define MCI_RESP0_OFFSET            0x14
#define MCI_RESP1_OFFSET            0x18
#define MCI_RESP2_OFFSET            0x1C
#define MCI_RESP3_OFFSET            0x20
#define MCI_DATA_TMR_OFFSET         0x24
#define MCI_DATA_LEN_OFFSET         0x28
#define MCI_DATA_CTRL_OFFSET        0x2C
#define MCI_DATA_CNT_OFFSET         0x30
#define MCI_STATUS_OFFSET           0x34
#define MCI_CLEAR_OFFSET            0x38
#define MCI_MASK0_OFFSET            0x3C
#define MCI_MASK1_OFFSET            0x40
#define MCI_FIFO_CNT_OFFSET         0x48
#define MCI_FIFO_OFFSET             0x80

/* I2S Interface Controller (I2S) */

/* I2S_BASE_ADDR                   0xE0088000 */
#define I2S_DAO_OFFSET              0x00
#define I2S_DAI_OFFSET              0x04
#define I2S_TX_FIFO_OFFSET          0x08
#define I2S_RX_FIFO_OFFSET          0x0C
#define I2S_STATE_OFFSET            0x10
#define I2S_DMA1_OFFSET             0x14
#define I2S_DMA2_OFFSET             0x18
#define I2S_IRQ_OFFSET              0x1C
#define I2S_TXRATE_OFFSET           0x20
#define I2S_RXRATE_OFFSET           0x24

/* General-purpose DMA Controller */

/* DMA_BASE_ADDR                    0xFFE04000 */
#define GPDMA_INT_STAT_OFFSET           0x4000
#define GPDMA_INT_TCSTAT_OFFSET         0x4004
#define GPDMA_INT_TCCLR_OFFSET          0x4008
#define GPDMA_INT_ERR_STAT_OFFSET       0x400C
#define GPDMA_INT_ERR_CLR_OFFSET        0x4010
#define GPDMA_RAW_INT_TCSTAT_OFFSET     0x4014
#define GPDMA_RAW_INT_ERR_STAT_OFFSET   0x4018
#define GPDMA_ENABLED_CHNS_OFFSET       0x401C
#define GPDMA_SOFT_BREQ_OFFSET          0x4020
#define GPDMA_SOFT_SREQ_OFFSET          0x4024
#define GPDMA_SOFT_LBREQ_OFFSET         0x4028
#define GPDMA_SOFT_LSREQ_OFFSET         0x402C
#define GPDMA_CONFIG_OFFSET             0x4030
#define GPDMA_SYNC_OFFSET               0x0x4034

/* DMA channel 0 registers */

#define GPDMA_CH0_SRC_OFFSET        0x4100
#define GPDMA_CH0_DEST_OFFSET       0x4104
#define GPDMA_CH0_LLI_OFFSET        0x4108
#define GPDMA_CH0_CTRL_OFFSET       0x410C
#define GPDMA_CH0_CFG_OFFSET        0x4110

/* DMA channel 1 registers */

#define GPDMA_CH1_SRC_OFFSET        0x4120
#define GPDMA_CH1_DEST_OFFSET       0x4124
#define GPDMA_CH1_LLI_OFFSET        0x4128
#define GPDMA_CH1_CTRL_OFFSET       0x412C
#define GPDMA_CH1_CFG_OFFSET        0x4130

/* USB Controller */

#define USB_INT_BASE_ADDR           0xE01FC1C0
#define USB_BASE_ADDR               0xFFE0C200  /* USB Base Address */

/* USB Device Interrupt Registers */

#define USB_INT_STAT_OFFSET         0x00
#define USB_INT_EN_OFFSET           0x04
#define USB_INT_CLR_OFFSET          0x08
#define USB_INT_SET_OFFSET          0x0C
#define USB_INT_PRIO_OFFSET         0x2C

/* USB Device Endpoint Interrupt Registers */
#define USB_EP_INT_STAT_OFFSET      0x30
#define USB_EP_INT_EN_OFFSET        0x34
#define USB_EP_INT_CLR_OFFSET       0x38
#define USB_EP_INT_SET_OFFSET       0x3C
#define USB_EP_INT_PRIO_OFFSET      0x40

/* USB Device Endpoint Realization Registers */

#define USB_REALIZE_EP_OFFSET       0x44
#define USB_EP_INDEX_OFFSET         0x48
#define USB_MAXPACKET_SIZE_OFFSET   0x4C

/* USB Device Command Reagisters */

#define USB_CMD_CODE_OFFSET         0x10
#define USB_CMD_DATA_OFFSET         0x14

/* USB Device Data Transfer Registers */

#define USB_RX_DATA_OFFSET          0x18
#define USB_TX_DATA_OFFSET          0x1C
#define USB_RX_PLENGTH_OFFSET       0x20
#define USB_TX_PLENGTH_OFFSET       0x24
#define USB_USB_CTRL_OFFSET         0x28

/* USB Device DMA Registers */

#define USB_DMA_REQ_STAT_OFFSET     0x50
#define USB_DMA_REQ_CLR_OFFSET      0x54
#define USB_DMA_REQ_SET_OFFSET      0x58
#define USB_UDCA_HEAD_OFFSET        0x80
#define USB_EP_DMA_STAT_OFFSET      0x84
#define USB_EP_DMA_EN_OFFSET        0x88
#define USB_EP_DMA_DIS_OFFSET       0x8C
#define USB_DMA_INT_STAT_OFFSET     0x90
#define USB_DMA_INT_EN_OFFSET       0x94
#define USB_EOT_INT_STAT_OFFSET     0xA0
#define USB_EOT_INT_CLR_OFFSET      0xA4
#define USB_EOT_INT_SET_OFFSET      0xA8
#define USB_NDD_REQ_INT_STAT_OFFSET 0xAC
#define USB_NDD_REQ_INT_CLR_OFFSET  0xB0
#define USB_NDD_REQ_INT_SET_OFFSET  0xB4
#define USB_SYS_ERR_INT_STAT_OFFSET 0xB8
#define USB_SYS_ERR_INT_CLR_OFFSET  0xBC
#define USB_SYS_ERR_INT_SET_OFFSET  0xC0

/* System Control Block(SCB) modules include Memory Accelerator Module,
 * Phase Locked Loop, VPB divider, Power Control, External Interrupt,
 * Reset, and Code Security/Debugging
 */

#define SCB_BASE_ADDR               0xE01FC000

/* Memory Accelerator Module (MAM) Register */

#define SCB_MAMCR                   (*(volatile uint32_t*)(0xE01FC000))
#define SCB_MAMTIM                  (*(volatile uint32_t*)(0xE01FC004))
#define SCB_MEMMAP                  (*(volatile uint32_t*)(0xE01FC040))

/* Phase Locked Loop (PLL) Register */

#define SCB_PLLCON                  (*(volatile uint32_t*)(0xE01FC080))
#define SCB_PLLCFG                  (*(volatile uint32_t*)(0xE01FC084))
#define SCB_PLLSTAT                 (*(volatile uint32_t*)(0xE01FC088))
#define SCB_PLLFEED                 (*(volatile uint32_t*)(0xE01FC08C))

/* Power Control register */

#define SCB_PCON                    (*(volatile uint32_t*)(0xE01FC0C0))
#define SCB_PCONP                   (*(volatile uint32_t*)(0xE01FC0C4))
#define SCB_PCONP_OFFSET            0x0C4

/* Clock Divider Register */

#define SCB_CCLKCFG                 (*(volatile uint32_t*)(0xE01FC104))
#define SCB_USBCLKCFG               (*(volatile uint32_t*)(0xE01FC108))
#define SCB_CLKSRCSEL               (*(volatile uint32_t*)(0xE01FC10C))
#define SCB_PCLKSEL0                (*(volatile uint32_t*)(0xE01FC1A8))
#define SCB_PCLKSEL1                (*(volatile uint32_t*)(0xE01FC1AC))
#define SCB_PCLKSEL0_OFFSET         (0x1A8)
#define SCB_PCLKSEL1_OFFSET         (0x1AC)

/* External Interrupt register */

#define SCB_EXTINT                  (*(volatile uint32_t*)(0xE01FC140))
#define SCB_INTWAKE                 (*(volatile uint32_t*)(0xE01FC144))
#define SCB_EXTMODE                 (*(volatile uint32_t*)(0xE01FC148))
#define SCB_EXTPOLAR                (*(volatile uint32_t*)(0xE01FC14C))

/* Reser Source Identification register */

#define SCB_RSIR                    (*(volatile uint32_t*)(0xE01FC180))

/* RSID, code security protection */

#define SCB_CSPR                    (*(volatile uint32_t*)(0xE01FC184))

#define SCB_AHBCFG1                 (*(volatile uint32_t*)(0xE01FC188))
#define SCB_AHBCFG2                 (*(volatile uint32_t*)(0xE01FC18C))

/* System Controls and Status Register */

#define SCB_SCS                     (*(volatile uint32_t*)(0xE01FC1A0))

/* External Memory Controller (EMC) definitions */

/* MPMC(EMC) registers, note:
 * all the external memory controller(EMC) registers
 * are for LPC24xx only.
 */

#define STATIC_MEM0_BASE            0x80000000
#define STATIC_MEM1_BASE            0x81000000
#define STATIC_MEM2_BASE            0x82000000
#define STATIC_MEM3_BASE            0x83000000

#define DYNAMIC_MEM0_BASE           0xA0000000
#define DYNAMIC_MEM1_BASE           0xB0000000
#define DYNAMIC_MEM2_BASE           0xC0000000
#define DYNAMIC_MEM3_BASE           0xD0000000

/* External Memory Controller (EMC) */

/* #define EMC_BASE_ADDR           0xFFE08000 */

#define EMC_CTRL_OFFSET             0x000
#define EMC_STAT_OFFSET             0x004
#define EMC_CONFIG_OFFSET           0x008

/* Dynamic RAM access registers */
#define EMC_DYN_CTRL_OFFSET         0x020
#define EMC_DYN_RFSH_OFFSET         0x024
#define EMC_DYN_RD_CFG_OFFSET       0x028
#define EMC_DYN_RP_OFFSET           0x030
#define EMC_DYN_RAS_OFFSET          0x034
#define EMC_DYN_SREX_OFFSET         0x038
#define EMC_DYN_APR_OFFSET          0x03C
#define EMC_DYN_DAL_OFFSET          0x040
#define EMC_DYN_WR_OFFSET           0x044
#define EMC_DYN_RC_OFFSET           0x048
#define EMC_DYN_RFC_OFFSET          0x04C
#define EMC_DYN_XSR_OFFSET          0x050
#define EMC_DYN_RRD_OFFSET          0x054
#define EMC_DYN_MRD_OFFSET          0x058

#define EMC_DYN_CFG0_OFFSET         0x100
#define EMC_DYN_RASCAS0_OFFSET      0x104
#define EMC_DYN_CFG1_OFFSET         0x140
#define EMC_DYN_RASCAS1_OFFSET      0x144
#define EMC_DYN_CFG2_OFFSET         0x160
#define EMC_DYN_RASCAS2_OFFSET      0x164
#define EMC_DYN_CFG3_OFFSET         0x180
#define EMC_DYN_RASCAS3_OFFSET      0x184

/* static RAM access registers */

#define EMC_STA_CFG0_OFFSET         0x200
#define EMC_STA_WAITWEN0_OFFSET     0x204
#define EMC_STA_WAITOEN0_OFFSET     0x208
#define EMC_STA_WAITRD0_OFFSET      0x20C
#define EMC_STA_WAITPAGE0_OFFSET    0x210
#define EMC_STA_WAITWR0_OFFSET      0x214
#define EMC_STA_WAITTURN0_OFFSET    0x218

#define EMC_STA_CFG1_OFFSET         0x220
#define EMC_STA_WAITWEN1_OFFSET     0x224
#define EMC_STA_WAITOEN1_OFFSET     0x228
#define EMC_STA_WAITRD1_OFFSET      0x22C
#define EMC_STA_WAITPAGE1_OFFSET    0x230
#define EMC_STA_WAITWR1_OFFSET      0x234
#define EMC_STA_WAITTURN1_OFFSET    0x238

#define EMC_STA_CFG2_OFFSET         0x240
#define EMC_STA_WAITWEN2_OFFSET     0x244
#define EMC_STA_WAITOEN2_OFFSET     0x248
#define EMC_STA_WAITRD2_OFFSET      0x24C
#define EMC_STA_WAITPAGE2_OFFSET    0x250
#define EMC_STA_WAITWR2_OFFSET      0x254
#define EMC_STA_WAITTURN2_OFFSET    0x258

#define EMC_STA_CFG3_OFFSET         0x260
#define EMC_STA_WAITWEN3_OFFSET     0x264
#define EMC_STA_WAITOEN3_OFFSET     0x268
#define EMC_STA_WAITRD3_OFFSET      0x26C
#define EMC_STA_WAITPAGE3_OFFSET    0x270
#define EMC_STA_WAITWR3_OFFSET      0x274
#define EMC_STA_WAITTURN3_OFFSET    0x278

#define EMC_STA_EXT_WAIT_OFFSET     0x880

/* GPIO register offsets WORD access */

#define GPIO0_PIN_OFFSET            0x00  /* Pin Value Register */
#define GPIO0_SET_OFFSET            0x04  /* Pin Output Set Register */
#define GPIO0_DIR_OFFSET            0x08  /* Pin Direction Register */
#define GPIO0_CLR_OFFSET            0x0c  /* Pin Output Clear Register */
#define GPIO1_PIN_OFFSET            0x10  /* Pin Value Register */
#define GPIO1_SET_OFFSET            0x14  /* Pin Output Set Register */
#define GPIO1_DIR_OFFSET            0x18  /* Pin Direction Register */
#define GPIO1_CLR_OFFSET            0x1c  /* Pin Output Clear Register */

/* Fast I0 Base Address */

#define FIO_BASE_ADDR               0x3FFFC000

/* FIO register offsets WORD access */

#define FIO0_DIR_OFFSET             0x00  /* Fast GPIO Port Direction Register */
#define FIO0_MASK_OFFSET            0x10  /* Fast GPIO Mask Register */
#define FIO0_PIN_OFFSET             0x14  /* Fast GPIO Pin Value Register */
#define FIO0_SET_OFFSET             0x18  /* Fast GPIO Port Output Set Register */
#define FIO0_CLR_OFFSET             0x1c  /* Fast GPIO Port Output Clear Register */

#define FIO1_DIR_OFFSET             0x20  /* Fast GPIO Port Direction Register */
#define FIO1_MASK_OFFSET            0x30  /* Fast GPIO Mask Register */
#define FIO1_PIN_OFFSET             0x34  /* Fast GPIO Pin Value Register */
#define FIO1_SET_OFFSET             0x38  /* Fast GPIO Port Output Set Register */
#define FIO1_CLR_OFFSET             0x3c  /* Fast GPIO Port Output Clear Register */

#define FIO2_DIR_OFFSET             0x40  /* Fast GPIO Port Direction Register */
#define FIO2_MASK_OFFSET            0x50  /* Fast GPIO Mask Register */
#define FIO2_PIN_OFFSET             0x54  /* Fast GPIO Pin Value Register */
#define FIO2_SET_OFFSET             0x58  /* Fast GPIO Port Output Set Register */
#define FIO2_CLR_OFFSET             0x5c  /* Fast GPIO Port Output Clear Register */

#define FIO3_DIR_OFFSET             0x60  /* Fast GPIO Port Direction Register */
#define FIO3_MASK_OFFSET            0x70  /* Fast GPIO Mask Register */
#define FIO3_PIN_OFFSET             0x74  /* Fast GPIO Pin Value Register */
#define FIO3_SET_OFFSET             0x78  /* Fast GPIO Port Output Set Register */
#define FIO3_CLR_OFFSET             0x7c  /* Fast GPIO Port Output Clear Register */

#define FIO4_DIR_OFFSET             0x80  /* Fast GPIO Port Direction Register */
#define FIO4_MASK_OFFSET            0x90  /* Fast GPIO Mask Register */
#define FIO4_PIN_OFFSET             0x94  /* Fast GPIO Pin Value Register */
#define FIO4_SET_OFFSET             0x98  /* Fast GPIO Port Output Set Register */
#define FIO4_CLR_OFFSET             0x9c  /* Fast GPIO Port Output Clear Register */

/* FIO register offsets HALF-WORD access */

#define FIO0MASKL_OFFSET            0x10 /* Fast IO Mask Lower HALF-WORD */
#define FIO1MASKL_OFFSET            0x30
#define FIO2MASKL_OFFSET            0x50
#define FIO3MASKL_OFFSET            0x70
#define FIO4MASKL_OFFSET            0x90

#define FIO0MASKU_OFFSET            0x12 /* Fast IO Mask Upper HALF-WORD */
#define FIO1MASKU_OFFSET            0x32
#define FIO2MASKU_OFFSET            0x52
#define FIO3MASKU_OFFSET            0x72
#define FIO4MASKU_OFFSET            0x92

#define FIO0PINL_OFFSET             0x14 /* Fast IOPIN Lower HALF-WORD */
#define FIO1PINL_OFFSET             0x34
#define FIO2PINL_OFFSET             0x54
#define FIO3PINL_OFFSET             0x74
#define FIO4PINL_OFFSET             0x94

#define FIO0PINU_OFFSET             0x16 /* Fast IOPIN Upper HALF-WORD */
#define FIO1PINU_OFFSET             0x36
#define FIO2PINU_OFFSET             0x56
#define FIO3PINU_OFFSET             0x76
#define FIO4PINU_OFFSET             0x96

#define FIO0SETL_OFFSET             0x18 /* Fast IOSET Lower HALF-WORD */
#define FIO1SETL_OFFSET             0x38
#define FIO2SETL_OFFSET             0x58
#define FIO3SETL_OFFSET             0x78
#define FIO4SETL_OFFSET             0x98

#define FIO0SETU_OFFSET             0x1A /* Fast IOSET Upper HALF-WORD */
#define FIO1SETU_OFFSET             0x3A
#define FIO2SETU_OFFSET             0x5A
#define FIO3SETU_OFFSET             0x7A
#define FIO4SETU_OFFSET             0x9A

#define FIO0CLRL_OFFSET             0x1C /* Fast IOCLR Lower HALF-WORD */
#define FIO1CLRL_OFFSET             0x3C
#define FIO2CLRL_OFFSET             0x5C
#define FIO3CLRL_OFFSET             0x7C
#define FIO4CLRL_OFFSET             0x9C

#define FIO0CLRU_OFFSET             0x1E /* Fast IOCLR Upper HALF-WORD */
#define FIO1CLRU_OFFSET             0x3E
#define FIO2CLRU_OFFSET             0x5E
#define FIO3CLRU_OFFSET             0x7E
#define FIO4CLRU_OFFSET             0x9E

#define FIO0DIRL_OFFSET             0x00 /* Fast IODIR Lower HALF-WORD */
#define FIO1DIRL_OFFSET             0x20
#define FIO2DIRL_OFFSET             0x40
#define FIO3DIRL_OFFSET             0x60
#define FIO4DIRL_OFFSET             0x80

#define FIO0DIRU_OFFSET             0x02 /* Fast IODIR Upper HALF-WORD */
#define FIO1DIRU_OFFSET             0x22
#define FIO2DIRU_OFFSET             0x42
#define FIO3DIRU_OFFSET             0x62
#define FIO4DIRU_OFFSET             0x82

/* FIO register offsets BYTE access */

#define FIO0DIR0_OFFSET             0x00
#define FIO1DIR0_OFFSET             0x20
#define FIO2DIR0_OFFSET             0x40
#define FIO3DIR0_OFFSET             0x60
#define FIO4DIR0_OFFSET             0x80

#define FIO0DIR1_OFFSET             0x01
#define FIO1DIR1_OFFSET             0x21
#define FIO2DIR1_OFFSET             0x41
#define FIO3DIR1_OFFSET             0x61
#define FIO4DIR1_OFFSET             0x81

#define FIO0DIR2_OFFSET             0x02
#define FIO1DIR2_OFFSET             0x22
#define FIO2DIR2_OFFSET             0x42
#define FIO3DIR2_OFFSET             0x62
#define FIO4DIR2_OFFSET             0x82

#define FIO0DIR3_OFFSET             0x03
#define FIO1DIR3_OFFSET             0x23
#define FIO2DIR3_OFFSET             0x43
#define FIO3DIR3_OFFSET             0x63
#define FIO4DIR3_OFFSET             0x83

#define FIO0MASK0_OFFSET            0x10
#define FIO1MASK0_OFFSET            0x30
#define FIO2MASK0_OFFSET            0x50
#define FIO3MASK0_OFFSET            0x70
#define FIO4MASK0_OFFSET            0x90

#define FIO0MASK1_OFFSET            0x11
#define FIO1MASK1_OFFSET            0x21
#define FIO2MASK1_OFFSET            0x51
#define FIO3MASK1_OFFSET            0x71
#define FIO4MASK1_OFFSET            0x91

#define FIO0MASK2_OFFSET            0x12
#define FIO1MASK2_OFFSET            0x32
#define FIO2MASK2_OFFSET            0x52
#define FIO3MASK2_OFFSET            0x72
#define FIO4MASK2_OFFSET            0x92

#define FIO0MASK3_OFFSET            0x13
#define FIO1MASK3_OFFSET            0x33
#define FIO2MASK3_OFFSET            0x53
#define FIO3MASK3_OFFSET            0x73
#define FIO4MASK3_OFFSET            0x93

#define FIO0PIN0_OFFSET             0x14
#define FIO1PIN0_OFFSET             0x34
#define FIO2PIN0_OFFSET             0x54
#define FIO3PIN0_OFFSET             0x74
#define FIO4PIN0_OFFSET             0x94

#define FIO0PIN1_OFFSET             0x15
#define FIO1PIN1_OFFSET             0x25
#define FIO2PIN1_OFFSET             0x55
#define FIO3PIN1_OFFSET             0x75
#define FIO4PIN1_OFFSET             0x95

#define FIO0PIN2_OFFSET             0x16
#define FIO1PIN2_OFFSET             0x36
#define FIO2PIN2_OFFSET             0x56
#define FIO3PIN2_OFFSET             0x76
#define FIO4PIN2_OFFSET             0x96

#define FIO0PIN3_OFFSET             0x17
#define FIO1PIN3_OFFSET             0x37
#define FIO2PIN3_OFFSET             0x57
#define FIO3PIN3_OFFSET             0x77
#define FIO4PIN3_OFFSET             0x97

#define FIO0SET0_OFFSET             0x18
#define FIO1SET0_OFFSET             0x38
#define FIO2SET0_OFFSET             0x58
#define FIO3SET0_OFFSET             0x78
#define FIO4SET0_OFFSET             0x98

#define FIO0SET1_OFFSET             0x19
#define FIO1SET1_OFFSET             0x29
#define FIO2SET1_OFFSET             0x59
#define FIO3SET1_OFFSET             0x79
#define FIO4SET1_OFFSET             0x99

#define FIO0SET2_OFFSET             0x1A
#define FIO1SET2_OFFSET             0x3A
#define FIO2SET2_OFFSET             0x5A
#define FIO3SET2_OFFSET             0x7A
#define FIO4SET2_OFFSET             0x9A

#define FIO0SET3_OFFSET             0x1B
#define FIO1SET3_OFFSET             0x3B
#define FIO2SET3_OFFSET             0x5B
#define FIO3SET3_OFFSET             0x7B
#define FIO4SET3_OFFSET             0x9B

#define FIO0CLR0_OFFSET             0x1C
#define FIO1CLR0_OFFSET             0x3C
#define FIO2CLR0_OFFSET             0x5C
#define FIO3CLR0_OFFSET             0x7C
#define FIO4CLR0_OFFSET             0x9C

#define FIO0CLR1_OFFSET             0x1D
#define FIO1CLR1_OFFSET             0x2D
#define FIO2CLR1_OFFSET             0x5D
#define FIO3CLR1_OFFSET             0x7D
#define FIO4CLR1_OFFSET             0x9D

#define FIO0CLR2_OFFSET             0x1E
#define FIO1CLR2_OFFSET             0x3E
#define FIO2CLR2_OFFSET             0x5E
#define FIO3CLR2_OFFSET             0x7E
#define FIO4CLR2_OFFSET             0x9E

#define FIO0CLR3_OFFSET             0x1F
#define FIO1CLR3_OFFSET             0x3F
#define FIO2CLR3_OFFSET             0x5F
#define FIO3CLR3_OFFSET             0x7F
#define FIO4CLR3_OFFSET             0x9F

/* Vectored Interrupt Controller (VIC) register offsets */

#define VIC_IRQSTATUS_OFFSET        0x000  /* R: IRQ Status Register */
#define VIC_FIQSTATUS_OFFSET        0x004  /* R: FIQ Status Register */
#define VIC_RAWINTR_OFFSET          0x008  /* R: Raw Interrupt Status Register */
#define VIC_INTSELECT_OFFSET        0x00c  /* RW: Interrupt Select Register */
#define VIC_INTENABLE_OFFSET        0x010  /* RW: Interrupt Enable Register */
#define VIC_INTENCLEAR_OFFSET       0x014  /* W: Interrupt Enable Clear Register */
#define VIC_SOFTINT_OFFSET          0x018  /* RW: Software Interrupt Register */
#define VIC_SOFTINTCLEAR_OFFSET     0x01c  /* W: Software Interrupt Clear Register */
#define VIC_PROTECTION_OFFSET       0x020  /* Protection Enable Register */
#define VIC_PRIORITY_MASK_OFFSET    0x024  /* Priority Mask Register */

/* #define LPC23XX_VIC_BASE        0xfffff000
 * Vectored Interrupt Controller (VIC) Base
 */

#define VIC_ADDRESS_OFFSET          0xF00  /* RW: Vector Address Register */

#define VIC_VECTADDR0_OFFSET        0x100  /* RW: Vector Address 0 Register */
#define VIC_VECTADDR1_OFFSET        0x104  /* RW: Vector Address 1 Register */
#define VIC_VECTADDR2_OFFSET        0x108  /* RW: Vector Address 2 Register */
#define VIC_VECTADDR3_OFFSET        0x10c  /* RW: Vector Address 3 Register */
#define VIC_VECTADDR4_OFFSET        0x110  /* RW: Vector Address 4 Register */
#define VIC_VECTADDR5_OFFSET        0x114  /* RW: Vector Address 5 Register */
#define VIC_VECTADDR6_OFFSET        0x118  /* RW: Vector Address 6 Register */
#define VIC_VECTADDR7_OFFSET        0x11c  /* RW: Vector Address 7 Register */
#define VIC_VECTADDR8_OFFSET        0x120  /* RW: Vector Address 8 Register */
#define VIC_VECTADDR9_OFFSET        0x124  /* RW: Vector Address 9 Register */
#define VIC_VECTADDR10_OFFSET       0x128  /* RW: Vector Address 10 Register */
#define VIC_VECTADDR11_OFFSET       0x12c  /* RW: Vector Address 11 Register */
#define VIC_VECTADDR12_OFFSET       0x130  /* RW: Vector Address 12 Register */
#define VIC_VECTADDR13_OFFSET       0x134  /* RW: Vector Address 13 Register */
#define VIC_VECTADDR14_OFFSET       0x138  /* RW: Vector Address 14 Register */
#define VIC_VECTADDR15_OFFSET       0x13c  /* RW: Vector Address 15 Register */
#define VIC_VECTADDR16_OFFSET       0x140  /* RW: Vector Address 16 Register */
#define VIC_VECTADDR17_OFFSET       0x144  /* RW: Vector Address 17 Register */
#define VIC_VECTADDR18_OFFSET       0x148  /* RW: Vector Address 18 Register */
#define VIC_VECTADDR19_OFFSET       0x14c  /* RW: Vector Address 19 Register */
#define VIC_VECTADDR20_OFFSET       0x150  /* RW: Vector Address 20 Register */
#define VIC_VECTADDR21_OFFSET       0x154  /* RW: Vector Address 21 Register */
#define VIC_VECTADDR22_OFFSET       0x158  /* RW: Vector Address 22 Register */
#define VIC_VECTADDR23_OFFSET       0x15c  /* RW: Vector Address 23 Register */
#define VIC_VECTADDR24_OFFSET       0x160  /* RW: Vector Address 24 Register */
#define VIC_VECTADDR25_OFFSET       0x164  /* RW: Vector Address 25 Register */
#define VIC_VECTADDR26_OFFSET       0x168  /* RW: Vector Address 26 Register */
#define VIC_VECTADDR27_OFFSET       0x16c  /* RW: Vector Address 27 Register */
#define VIC_VECTADDR28_OFFSET       0x170  /* RW: Vector Address 28 Register */
#define VIC_VECTADDR29_OFFSET       0x174  /* RW: Vector Address 29 Register */
#define VIC_VECTADDR30_OFFSET       0x178  /* RW: Vector Address 30 Register */
#define VIC_VECTADDR31_OFFSET       0x17c  /* RW: Vector Address 31 Register */

/* VICVectPriority */

#define VIC_VECTPRIORITY0_OFFSET    0x200  /* RW: Vector Control 0 Register */
#define VIC_VECTPRIORITY1_OFFSET    0x204  /* RW: Vector Control 1 Register */
#define VIC_VECTPRIORITY2_OFFSET    0x208  /* RW: Vector Control 2 Register */
#define VIC_VECTPRIORITY3_OFFSET    0x20c  /* RW: Vector Control 3 Register */
#define VIC_VECTPRIORITY4_OFFSET    0x210  /* RW: Vector Control 4 Register */
#define VIC_VECTPRIORITY5_OFFSET    0x214  /* RW: Vector Control 5 Register */
#define VIC_VECTPRIORITY6_OFFSET    0x218  /* RW: Vector Control 6 Register */
#define VIC_VECTPRIORITY7_OFFSET    0x21c  /* RW: Vector Control 7 Register */
#define VIC_VECTPRIORITY8_OFFSET    0x220  /* RW: Vector Control 8 Register */
#define VIC_VECTPRIORITY9_OFFSET    0x224  /* RW: Vector Control 9 Register */
#define VIC_VECTPRIORITY10_OFFSET   0x228  /* RW: Vector Control 10 Register */
#define VIC_VECTPRIORITY11_OFFSET   0x22c  /* RW: Vector Control 11 Register */
#define VIC_VECTPRIORITY12_OFFSET   0x230  /* RW: Vector Control 12 Register */
#define VIC_VECTPRIORITY13_OFFSET   0x234  /* RW: Vector Control 13 Register */
#define VIC_VECTPRIORITY14_OFFSET   0x238  /* RW: Vector Control 14 Register */
#define VIC_VECTPRIORITY15_OFFSET   0x23c  /* RW: Vector Control 15 Register */
#define VIC_VECTPRIORITY16_OFFSET   0x240  /* RW: Vector Control 16 Register */
#define VIC_VECTPRIORITY17_OFFSET   0x244  /* RW: Vector Control 17 Register */
#define VIC_VECTPRIORITY18_OFFSET   0x248  /* RW: Vector Control 18 Register */
#define VIC_VECTPRIORITY19_OFFSET   0x24c  /* RW: Vector Control 19 Register */
#define VIC_VECTPRIORITY20_OFFSET   0x250  /* RW: Vector Control 20 Register */
#define VIC_VECTPRIORITY21_OFFSET   0x254  /* RW: Vector Control 21 Register */
#define VIC_VECTPRIORITY22_OFFSET   0x258  /* RW: Vector Control 22 Register */
#define VIC_VECTPRIORITY23_OFFSET   0x25c  /* RW: Vector Control 23 Register */
#define VIC_VECTPRIORITY24_OFFSET   0x260  /* RW: Vector Control 24 Register */
#define VIC_VECTPRIORITY25_OFFSET   0x264  /* RW: Vector Control 25 Register */
#define VIC_VECTPRIORITY26_OFFSET   0x268  /* RW: Vector Control 26 Register */
#define VIC_VECTPRIORITY27_OFFSET   0x26c  /* RW: Vector Control 27 Register */
#define VIC_VECTPRIORITY28_OFFSET   0x270  /* RW: Vector Control 28 Register */
#define VIC_VECTPRIORITY29_OFFSET   0x274  /* RW: Vector Control 29 Register */
#define VIC_VECTPRIORITY30_OFFSET   0x278  /* RW: Vector Control 30 Register */
#define VIC_VECTPRIORITY31_OFFSET   0x27c  /* RW: Vector Control 31 Register */

/****************************************************************************
 * Inline Functions
 ****************************************************************************/

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

#endif /* __ARCH_ARM_SRC_LPC2378_CHIP_H */