/****************************************************************************
 * arch/arm/src/mx8mp/mx8mp_start.c
 *
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.  The
 * ASF licenses this file to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance with the
 * License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
 * License for the specific language governing permissions and limitations
 * under the License.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <stdint.h>
#include <assert.h>
#include <debug.h>

#include <nuttx/init.h>
#include <arch/board/board.h>

#include "mx8mp_mpuinit.h"
#include "mx8mp_lowputc.h"
#include "mx8mp_userspace.h"
#include "mx8mp_clockconfig.h"
#include "mx8mp_start.h"

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/****************************************************************************
 * Private Data
 ****************************************************************************/

/****************************************************************************
 * Public Data
 ****************************************************************************/

/****************************************************************************
 * Private Functions
 ****************************************************************************/

#ifdef CONFIG_DEBUG_FEATURES
#  define showprogress(c) arm_lowputc(c)
#else
#  define showprogress(c)
#endif

#ifdef CONFIG_ARMV7M_STACKCHECK
/* we need to get r10 set before we can allow instrumentation calls */

void __start(void) noinstrument_function;
#endif

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: __start
 *
 * Description:
 *   This is the reset entry point.
 *
 ****************************************************************************/

void __start(void)
{
  const uint32_t *src;
  uint32_t *dest;

#ifdef CONFIG_ARMV7M_STACKCHECK
  /* Set the stack limit before we attempt to call any functions */

  __asm__ volatile ("sub r10, sp, %0" : : "r"
                    (CONFIG_IDLETHREAD_STACKSIZE - 64) :);
#endif

  /* Clear .bss.  We'll do this inline (vs. calling memset) just to be
   * certain that there are no issues with the state of global variables.
   */

  for (dest = (uint32_t *)_sbss; dest < (uint32_t *)_ebss; )
    {
      *dest++ = 0;
    }

  /* Move the initialized data section from his temporary holding spot in
   * FLASH into the correct place in SRAM.  The correct place in SRAM is
   * give by _sdata and _edata.  The temporary location is in FLASH at the
   * end of all of the other read-only data (.text, .rodata) at _eronly.
   */

  for (src = (const uint32_t *)_eronly,
       dest = (uint32_t *)_sdata; dest < (uint32_t *)_edata;
      )
    {
      *dest++ = *src++;
    }

  /* Copy any necessary code sections from FLASH to RAM.  The correct
   * destination in SRAM is given by _sramfuncs and _eramfuncs.  The
   * temporary location is in flash after the data initialization code
   * at _framfuncs
   */

#ifdef CONFIG_ARCH_RAMFUNCS
  for (src = (const uint32_t *)_framfuncs,
       dest = (uint32_t *)_sramfuncs; dest < (uint32_t *)_eramfuncs;
      )
    {
      *dest++ = *src++;
    }
#endif

  /* Initialize the FPU (if configured) */

  arm_fpuconfig();

  /* Initialize the MPU to handle caching accesses */

  mx8mp_mpu_initialize();

  /* Enable I cache and D cache now that MPU is initialized */

  up_enable_icache();
  up_enable_dcache();

  /* Perform clock initialization */

  mx8mp_clockconfig();

  /* Configure the uart and perform early serial initialization so that we
   * can get debug output as soon as possible (This depends on clock
   * configuration).
   */

  mx8mp_lowsetup();
  showprogress('A');

#ifdef USE_EARLYSERIALINIT
  /* Perform early serial initialization */

  arm_earlyserialinit();
  showprogress('B');
#endif

#ifdef CONFIG_BUILD_PROTECTED
  /* For the case of the separate user-/kernel-space build, perform whatever
   * platform specific initialization of the user memory is required.
   * Normally this just means initializing the user space .data and .bss
   * segments.
   */

  mx8mp_userspace();
  showprogress('C');
#endif

  /* Initialize other on-board resources */

  mx8mp_board_initialize();
  showprogress('D');

  /* Then start NuttX */

  nx_start();

  /* Shouldn't get here */

  for (; ; );
}