* drivers/wireless/spirit/lib/spirit_timer.c
*
* SPDX-License-Identifier: BSD-3-Clause
* SPDX-FileCopyrightText: Copyright(c) 2015 STMicroelectronics
* SPDX-FileContributor: Author: VMA division - AMS
* Version 3.2.2 08-July-2015
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
* Included Files
******************************************************************************/
#include <assert.h>
#include "spirit_config.h"
#include "spirit_timer.h"
#include "spirit_radio.h"
#include "spirit_spi.h"
* Pre-processor Definitions
******************************************************************************/
#define S_ABS(a) ((a) > 0 ? (a) : -(a))
* Public Functions
******************************************************************************/
* Name: spirit_timer_enable_ldcrmode
*
* Description:
* Enables or Disables the LDCR mode.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for LDCR mode.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_enable_ldcrmode(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval;
int ret;
ret = spirit_reg_read(spirit, PROTOCOL2_BASE, ®val, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= PROTOCOL2_LDC_MODE_MASK;
}
else
{
regval &= ~PROTOCOL2_LDC_MODE_MASK;
}
ret = spirit_reg_write(spirit, PROTOCOL2_BASE, ®val, 1);
}
return ret;
}
* Name: spirit_timer_enable_autoreload
*
* Description:
* Enables or Disables the LDCR timer reloading with the value stored in the
* LDCR_RELOAD registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* newstate - New state for LDCR reloading.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_enable_autoreload(FAR struct spirit_library_s *spirit,
enum spirit_functional_state_e newstate)
{
uint8_t regval;
int ret;
ret = spirit_reg_read(spirit, PROTOCOL1_BASE, ®val, 1);
if (ret >= 0)
{
if (newstate == S_ENABLE)
{
regval |= PROTOCOL1_LDC_RELOAD_ON_SYNC_MASK;
}
else
{
regval &= ~PROTOCOL1_LDC_RELOAD_ON_SYNC_MASK;
}
ret = spirit_reg_write(spirit, PROTOCOL1_BASE, ®val, 1);
}
return ret;
}
* Name: spirit_timer_get_autoreload
*
* Description:
* Returns the LDCR timer reload bit.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Value of the reload bit.
*
******************************************************************************/
enum spirit_functional_state_e
spirit_timer_get_autoreload(FAR struct spirit_library_s *spirit)
{
uint8_t regval;
spirit_reg_read(spirit, PROTOCOL1_BASE, ®val, 1);
return (enum spirit_functional_state_e)(regval & 0x80);
}
* Name: spirit_timer_setup_rxtimeout
*
* Description:
* Sets the RX timeout timer initialization registers with the values of
* COUNTER and PRESCALER according to the formula: Trx=PRESCALER*COUNTER*Tck.
* Remember that it is possible to have infinite RX_Timeout writing 0 in the
* RX_Timeout_Counter and/or RX_Timeout_Prescaler registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* counter - Value for the timer counter.
* prescaler - Value for the timer prescaler.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_setup_rxtimeout(FAR struct spirit_library_s *spirit,
uint8_t counter, uint8_t prescaler)
{
uint8_t regval[2] =
{
prescaler, counter
};
* register.
*/
return spirit_reg_write(spirit,
TIMERS5_RX_TIMEOUT_PRESCALER_BASE, regval, 2);
}
* Name: spirit_timer_set_rxtimeout
*
* Description:
* Sets the RX timeout timer counter and prescaler from the desired value in
* ms. it is possible to fix the RX_Timeout to a minimum value of 50.417us
* to a maximum value of about 3.28 s.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* desired - Desired timer value.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_rxtimeout(FAR struct spirit_library_s *spirit,
float desired)
{
uint8_t regval[2];
spirit_timer_calc_rxtimeout_values(spirit, desired, ®val[1], ®val[0]);
* register.
*/
return spirit_reg_write(spirit,
TIMERS5_RX_TIMEOUT_PRESCALER_BASE, regval, 2);
}
* Name: spirit_timer_set_rxtimeout_counter
*
* Description:
* Sets the RX timeout timer counter. If 'counter' is equal to 0 the
* timeout is disabled.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* counter - value for the timer counter.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_rxtimeout_counter(FAR struct spirit_library_s *spirit,
uint8_t counter)
{
return spirit_reg_write(spirit,
TIMERS4_RX_TIMEOUT_COUNTER_BASE, &counter, 1);
}
* Name: spirit_timer_set_rxtimeout_prescaler
*
* Description:
* Sets the RX timeout timer prescaler. If it is equal to 0 the timeout is
* infinite.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* prescaler - Value for the timer prescaler.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_rxtimeout_prescaler(FAR struct spirit_library_s *spirit,
uint8_t prescaler)
{
return spirit_reg_write(spirit,
TIMERS5_RX_TIMEOUT_PRESCALER_BASE, &prescaler, 1);
}
* Name: spirit_timer_get_rxtimeout_setup
*
* Description:
* Returns the RX timeout timer.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* mstimeout - Pointer to the variable in which the timeout expressed in
* milliseconds has to be stored. If the returned value is 0,
* it means that the RX_Timeout is infinite.
* counter - Pointer to the variable in which the timer counter has to
* be stored.
* prescaler - Pointer to the variable in which the timer prescaler has to
* be stored.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_get_rxtimeout_setup(FAR struct spirit_library_s *spirit,
FAR float *mstimeout,
FAR uint8_t *counter,
FAR uint8_t *prescaler)
{
float xtal_frequency;
uint8_t regval[2];
int ret;
ret = spirit_reg_read(spirit, TIMERS5_RX_TIMEOUT_PRESCALER_BASE, regval, 2);
if (ret >= 0)
{
*prescaler = regval[0];
*counter = regval[1];
xtal_frequency = (float)spirit->xtal_frequency;
if (xtal_frequency > DOUBLE_XTAL_THR)
{
xtal_frequency /= 2.0;
}
xtal_frequency /= 1000.0;
*mstimeout = (float)((regval[0] + 1) *
regval[1] * (1210.0 / xtal_frequency));
}
return ret;
}
* Name: spirit_timer_setup_wakeuptimer
*
* Description:
* Sets the LDCR wake up timer initialization registers with the values of
* COUNTER and PRESCALER according to the formula:
*
* Twu=(PRESCALER + 1) * (COUNTER +1 ) * Tck,
*
* where Tck = 28.818 us. The minimum vale of the wakeup timeout is 28.818us
* (PRESCALER and COUNTER equals to 0) and the maximum value is about 1.89 s
* (PRESCALER anc COUNTER equals to 255).
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* counter - Value for the timer counter.
* prescaler - Value for the timer prescaler.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_setup_wakeuptimer(FAR struct spirit_library_s *spirit,
uint8_t counter, uint8_t prescaler)
{
uint8_t regval[2] =
{
prescaler, counter
};
* corresponding register.
*/
return spirit_reg_write(spirit, TIMERS3_LDC_PRESCALER_BASE, regval, 2);
}
* Name: spirit_timer_set_wakeuptimer
*
* Description:
* Sets the LDCR wake up timer counter and prescaler from the desired value
* in ms, according to the formula: Twu=(PRESCALER +1)*(COUNTER+1)*Tck,
* where Tck = 28.818 us. The minimum vale of the wakeup timeout is
* 28.818us (PRESCALER and COUNTER equals to 0) and the maximum value is
* about 1.89 s (PRESCALER anc COUNTER equals to 255).
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* desired - Desired timer value.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_wakeuptimer(FAR struct spirit_library_s *spirit,
float desired)
{
uint8_t regval[2];
spirit_timer_calc_wakeup_values(spirit, desired, ®val[1], ®val[0]);
* corresponding register.
*/
return spirit_reg_write(spirit, TIMERS3_LDC_PRESCALER_BASE, regval, 2);
}
* Name: spirit_timer_set_wakeuptimer_counter
*
* Description:
* Sets the LDCR wake up timer counter. Remember that this value is
* increased by one in the Twu calculation.
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck, where Tck = 28.818 us
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* counter - Value for the timer counter.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_wakeuptimer_counter(FAR struct spirit_library_s *spirit,
uint8_t counter)
{
return spirit_reg_write(spirit, TIMERS2_LDC_COUNTER_BASE, &counter, 1);
}
* Name: spirit_timer_set_wakeuptimer_prescaler
*
* Description:
* Sets the LDCR wake up timer prescaler. Remember that this value is
* increased by one in the Twu calculation.
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck, where Tck = 28.818 us
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* prescaler - Value for the timer prescaler.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_wakeuptimer_prescaler(FAR struct spirit_library_s *spirit,
uint8_t prescaler)
{
* register .
*/
return spirit_reg_write(spirit, TIMERS3_LDC_PRESCALER_BASE, &prescaler, 1);
}
* Name: spirit_timer_get_wakeuptimer_setup
*
* Description:
* Returns the LDCR wake up timer, according to the formula:
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck, where Tck = 28.818 us.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* wakeupmsec - Pointer to the variable in which the wake-up time expressed
* in milliseconds has to be stored.
* counter - Pointer to the variable in which the timer counter has to
* be stored.
* prescaler - Pointer to the variable in which the timer prescaler has to
* be stored.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_get_wakeuptimer_setup(FAR struct spirit_library_s *spirit,
FAR float *wakeupmsec,
FAR uint8_t *counter,
FAR uint8_t *prescaler)
{
uint8_t regval[2];
float rco_freq;
int ret;
rco_freq = (float)spirit_timer_get_rcofrequency(spirit);
ret = spirit_reg_read(spirit, TIMERS3_LDC_PRESCALER_BASE, regval, 2);
if (ret >= 0)
{
*prescaler = regval[0];
*counter = regval[1];
*wakeupmsec = (float)((((*prescaler) + 1) * ((*counter) + 1) *
(1000.0 / rco_freq)));
}
return ret;
}
* Name: spirit_timer_setup_wakeuptimer_reload
*
* Description:
* Sets the LDCR wake up timer reloading registers with the values of
* COUNTER and PRESCALER according to the formula:
*
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck
*
* where Tck = 28.818 us. The minimum vale of the wakeup timeout is
* 28.818us (PRESCALER and COUNTER equals to 0) and the maximum value is
* about 1.89 s (PRESCALER anc COUNTER equals to 255).
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* counter - Reload value for the timer counter.
* prescaler - Reload value for the timer prescaler.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_setup_wakeuptimer_reload(FAR struct spirit_library_s *spirit,
uint8_t counter, uint8_t prescaler)
{
uint8_t regval[2] =
{
prescaler, counter
};
* corresponding register
*/
return spirit_reg_write(spirit,
TIMERS1_LDC_RELOAD_PRESCALER_BASE, regval, 2);
}
* Name: spirit_timer_wakeuptimer_reload
*
* Description:
* Sets the LDCR wake up reload timer counter and prescaler from the desired
* value in ms, according to the formula:
*
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck
*
* where Tck = 28.818 us. The minimum vale of the wakeup timeout is 28.818us
* (PRESCALER and COUNTER equals to 0) and the maximum value is about 1.89 s
* (PRESCALER anc COUNTER equals to 255).
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* desired - Desired timer value.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_wakeuptimer_reload(FAR struct spirit_library_s *spirit,
float desired)
{
uint8_t regval[2];
spirit_timer_calc_wakeup_values(spirit, desired, ®val[1], ®val[0]);
* corresponding register.
*/
return spirit_reg_write(spirit,
TIMERS1_LDC_RELOAD_PRESCALER_BASE, regval, 2);
}
* Name: spirit_timer_set_wakeuptimer_reloadcounter
*
* Description:
* Sets the LDCR wake up timer reload counter. Remember that this value is
* increased by one in the Twu calculation.
*
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck
*
* where Tck = 28.818 us.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* counter - Value for the timer counter.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_wakeuptimer_reloadcounter(
FAR struct spirit_library_s *spirit,
uint8_t counter)
{
* register.
*/
return spirit_reg_write(spirit,
TIMERS0_LDC_RELOAD_COUNTER_BASE, &counter, 1);
}
* Name: spirit_timer_set_wakeuptimer_reloadprescaler
*
* Description:
* Sets the LDCR wake up timer reload prescaler. Remember that this value
* is increasedd by one in the Twu calculation.
*
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck
*
* where Tck = 28.818 us.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* prescaler - Value for the timer prescaler.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_wakeuptimer_reloadprescaler(
FAR struct spirit_library_s *spirit,
uint8_t prescaler)
{
* register.
*/
return spirit_reg_write(spirit,
TIMERS1_LDC_RELOAD_PRESCALER_BASE, &prescaler, 1);
}
* Name: spirit_timer_get_wakeuptimer_reload_setup
*
* Description:
* Returns the LDCR wake up reload timer, according to the formula:
*
* Twu=(PRESCALER +1)*(COUNTER+1)*Tck
*
* where Tck = 28.818 us.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* reload - Pointer to the variable in which the wake-up reload time
* expressed in milliseconds has to be stored.
* counter - Pointer to the variable in which the timer counter has to be
* stored.
* prescaler - Pointer to the variable in which the timer prescaler has to
* be stored.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_get_wakeuptimer_reload_setup(
FAR struct spirit_library_s *spirit,
FAR float *reload,
FAR uint8_t *counter,
FAR uint8_t *prescaler)
{
uint8_t regval[2];
float rco_freq;
int ret;
rco_freq = (float)spirit_timer_get_rcofrequency(spirit);
ret = spirit_reg_read(spirit,
TIMERS1_LDC_RELOAD_PRESCALER_BASE, regval, 2);
if (ret >= 0)
{
*prescaler = regval[0];
*counter = regval[1];
*reload = (float)((((*prescaler) + 1) * ((*counter) + 1) *
(1000.0 / rco_freq)));
}
return ret;
}
* Name: spirit_timer_get_rcofrequency
*
* Description:
* Computes and returns the RCO frequency. This frequency depends on the
* xtal frequency and the XTAL bit in register 0x01.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* RCO frequency in Hz.
*
******************************************************************************/
uint16_t spirit_timer_get_rcofrequency(FAR struct spirit_library_s *spirit)
{
uint32_t xtal_frequency = spirit->xtal_frequency;
uint16_t rco_freq = 34700;
uint8_t xtal_flag;
if (xtal_frequency > 30000000)
{
xtal_frequency /= 2;
}
if (xtal_frequency == 25000000)
{
spirit_reg_read(spirit, 0x01, &xtal_flag, 1);
xtal_flag = (xtal_flag & 0x40);
if (xtal_flag == 0)
{
rco_freq = 36100;
}
else
{
rco_freq = 33300;
}
}
return rco_freq;
}
* Name: spirit_timer_calc_wakeup_values
*
* Description:
* Computes the values of the wakeup timer counter and prescaler from the
* user time expressed in millisecond. The prescaler and the counter values
* are computed maintaining the prescaler value as small as possible in
* order to obtain the best resolution, and in the meantime minimizing the
* error.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* desired - Desired wakeup timeout in millisecs. Since the counter and
* prescaler are 8 bit registers the maximum reachable value is
* maxTime = fTclk x 256 x 256.
* counter - Pointer to the variable in which the value for the wakeup
* timer counter has to be stored.
* prescaler - Pointer to the variable in which the value for the wakeup
* timer prescaler has to be stored.
*
* Returned Value:
* None
*
******************************************************************************/
void spirit_timer_calc_wakeup_values(FAR struct spirit_library_s *spirit,
float desired, FAR uint8_t *counter,
FAR uint8_t *prescaler)
{
float rco_freq;
float err;
uint32_t n;
rco_freq = ((float)spirit_timer_get_rcofrequency(spirit)) / 1000;
* frequency - divide times 1000 more because we have an input in ms
* (variable rco_freq is already this frequency divided by 1000).
*/
n = (uint32_t)(desired * rco_freq);
* of spirit1.
*/
if (n / 0xff > 0xfd)
{
*counter = 0xff;
*prescaler = 0xff;
return;
}
*prescaler = (n / 0xff) + 2;
*counter = n / (*prescaler);
err = S_ABS((float)(*counter) * (*prescaler) / rco_freq - desired);
if ((*counter) <= 254)
{
if (S_ABS((float)((*counter) + 1) *
(*prescaler) / rco_freq - desired) < err)
{
(*counter)++;
}
}
* spirit1.
*/
(*prescaler)--;
if (*counter > 1)
{
(*counter)--;
}
else
{
*counter = 1;
}
}
* Name: spirit_timer_calc_rxtimeout_values
*
* Description:
* Computes the values of the rx_timeout timer counter and prescaler from
* the user time expressed in millisecond. The prescaler and the counter
* values are computed maintaining the prescaler value as small as possible
* in order to obtain the best resolution, and in the meantime minimizing
* the error.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* desired - Desired rx_timeout in millisecs. Since the counter and
* prescaler are 8 bit registers the maximum reachable value
* is maxTime = fTclk x 255 x 255.
* counter - Pointer to the variable in which the value for the rx_timeout
* counter has to be stored.
* prescaler - Pointer to the variable in which the value for the rx_timeout
* prescaler has to be stored.
*
* Returned Value:
* None
*
******************************************************************************/
void spirit_timer_calc_rxtimeout_values(FAR struct spirit_library_s *spirit,
float desired, FAR uint8_t *counter,
FAR uint8_t *prescaler)
{
uint32_t xtal_frequency = spirit->xtal_frequency;
uint32_t n;
float err;
if (xtal_frequency > DOUBLE_XTAL_THR)
{
xtal_frequency >>= 1;
}
* - divide times 1000 more because we have an input in ms.
*/
n = (uint32_t)(desired * xtal_frequency / 1210000);
* spirit1.
*/
if (n / 0xff > 0xfd)
{
*counter = 0xff;
*prescaler = 0xff;
return;
}
*prescaler = (n / 0xff) + 2;
*counter = n / (*prescaler);
err = S_ABS((float)(*counter) * (*prescaler) * 1210000 /
xtal_frequency - desired);
if ((*counter) <= 254)
{
if (S_ABS((float)((*counter) + 1) * (*prescaler) * 1210000 /
xtal_frequency - desired) < err)
{
(*counter)++;
}
}
* spirit1.
*/
(*prescaler)--;
if ((*counter) > 1)
{
(*counter)--;
}
else
{
*counter = 1;
}
}
* Name: spirit_timer_set_rxtimeout_stopcondition
*
* Description:
* Sets the RX timeout stop conditions.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
* stopcondition - New stop condition.
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_set_rxtimeout_stopcondition(
FAR struct spirit_library_s *spirit,
enum spirit_rxtimeout_stopcondition_e
stopcondition)
{
uint8_t regval[2];
int ret;
DEBUGASSERT(IS_RX_TIMEOUT_STOP_CONDITION(stopcondition));
ret = spirit_reg_read(spirit, PCKT_FLT_OPTIONS_BASE, regval, 2);
if (ret >= 0)
{
regval[0] &= 0xbf;
regval[0] |= ((stopcondition & 0x08) << 3);
regval[1] &= 0x1f;
regval[1] |= (stopcondition << 5);
ret = spirit_reg_write(spirit, PCKT_FLT_OPTIONS_BASE, regval, 2);
}
return ret;
}
* Name: spirit_timer_cmd_reload
*
* Description:
* Sends the LDC_RELOAD command to SPIRIT. Reload the LDC timer with the
* value stored in the LDC_PRESCALER / COUNTER registers.
*
* Input Parameters:
* spirit - Reference to a Spirit library state structure instance
*
* Returned Value:
* Zero (OK) on success; a negated errno value on failure.
*
******************************************************************************/
int spirit_timer_cmd_reload(FAR struct spirit_library_s *spirit)
{
return spirit_command(spirit, COMMAND_LDC_RELOAD);
}