| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag This implements the known parts of the Realtek 4 byte tag protocol version 0xA, as found in the RTL8366RB DSA switch. It is designated as protocol version 0xA as a different Realtek 4 byte tag format with protocol version 0x9 is known to exist in the Realtek RTL8306 chips. The tag and switch chip lacks public documentation, so the tag format has been reverse-engineered from packet dumps. As only ingress traffic has been available for analysis an egress tag has not been possible to develop (even using educated guesses about bit fields) so this is as far as it gets. It is not known if the switch even supports egress tagging. Excessive attempts to figure out the egress tag format was made. When nothing else worked, I just tried all bit combinations with 0xannp where a is protocol and p is port. I looped through all values several times trying to get a response from ping, without any positive result. Using just these ingress tags however, the switch functionality is vastly improved and the packets find their way into the destination port without any tricky VLAN configuration. On the D-Link DIR-685 the LAN ports now come up and respond to ping without any command line configuration so this is a real improvement for users. Egress packets need to be restricted to the proper target ports using VLAN, which the RTL8366RB DSA switch driver already sets up. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag This implements the known parts of the Realtek 4 byte tag protocol version 0xA, as found in the RTL8366RB DSA switch. It is designated as protocol version 0xA as a different Realtek 4 byte tag format with protocol version 0x9 is known to exist in the Realtek RTL8306 chips. The tag and switch chip lacks public documentation, so the tag format has been reverse-engineered from packet dumps. As only ingress traffic has been available for analysis an egress tag has not been possible to develop (even using educated guesses about bit fields) so this is as far as it gets. It is not known if the switch even supports egress tagging. Excessive attempts to figure out the egress tag format was made. When nothing else worked, I just tried all bit combinations with 0xannp where a is protocol and p is port. I looped through all values several times trying to get a response from ping, without any positive result. Using just these ingress tags however, the switch functionality is vastly improved and the packets find their way into the destination port without any tricky VLAN configuration. On the D-Link DIR-685 the LAN ports now come up and respond to ping without any command line configuration so this is a real improvement for users. Egress packets need to be restricted to the proper target ports using VLAN, which the RTL8366RB DSA switch driver already sets up. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
net: dsa: Add devlink port regions support to DSA Allow DSA drivers to make use of devlink port regions, via simple wrappers. Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
net: dsa: free routing table on probe failure mainline inclusion from mainline-v6.15-rc3 commit 8bf108d7161ffc6880ad13a0cc109de3cf631727 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC5BMY CVE: CVE-2025-37786 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=8bf108d7161ffc6880ad13a0cc109de3cf631727 -------------------------------- If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory. Fixes: c5f51765a1f6 ("net: dsa: list DSA links in the fabric") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250414213001.2957964-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Conflicts: net/dsa/dsa.c net/dsa/dsa2.c [conflicts due to not merge 47d2ce03dcfb ("net: dsa: rename dsa2.c back into dsa.c and create its header")] Signed-off-by: Wang Liang <wangliang74@huawei.com> | 6 个月前 | |
net: dsa: Utilize __vlan_find_dev_deep_rcu() Now that we are guaranteed that dsa_untag_bridge_pvid() is called after eth_type_trans() we can utilize __vlan_find_dev_deep_rcu() which will take care of finding an 802.1Q upper on top of a bridge master. A common use case, prior to 12a1526d067 ("net: dsa: untag the bridge pvid from rx skbs") was to configure a bridge 802.1Q upper like this: ip link add name br0 type bridge vlan_filtering 0 ip link add link br0 name br0.1 type vlan id 1 in order to pop the default_pvid VLAN tag. With this change we restore that behavior while still allowing the DSA receive path to automatically pop the VLAN tag. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
net: dsa: fix a crash if ->get_sset_count() fails stable inclusion from stable-5.10.42 commit caff86f85512b8e0d9830e8b8b0dfe13c68ce5b6 bugzilla: 55093 CVE: NA -------------------------------- commit a269333fa5c0c8e53c92b5a28a6076a28cde3e83 upstream. If ds->ops->get_sset_count() fails then it "count" is a negative error code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative error code is type promoted to a very high value and the loop will corrupt memory until the system crashes. Fix this by checking for error codes and changing the type of "i" to just int. Fixes: badf3ada60ab ("net: dsa: Provide CPU port statistics to master netdev") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
net: dsa: Add missing of_node_put() in dsa_port_link_register_of stable inclusion from stable-v5.10.114 commit 72ae15d5ce5fd37f3c36fd0a5a3de3cf266c11e8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5IY1V Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=72ae15d5ce5fd37f3c36fd0a5a3de3cf266c11e8 -------------------------------- [ Upstream commit fc06b2867f4cea543505acfb194c2be4ebf0c7d3 ] The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. of_node_put() will check for NULL value. Fixes: a20f997010c4 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Acked-by: Xie XiuQi <xiexiuqi@huawei.com> | 3 年前 | |
net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup stable inclusion from stable-5.10.68 commit cf6f29bb2c18be0aaa54d85b5d58f6a9759bcbf1 bugzilla: 182671 https://gitee.com/openeuler/kernel/issues/I4EWUH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=cf6f29bb2c18be0aaa54d85b5d58f6a9759bcbf1 -------------------------------- commit 6a52e73368038f47f6618623d75061dc263b26ae upstream. DSA supports connecting to a phy-handle, and has a fallback to a non-OF based method of connecting to an internal PHY on the switch's own MDIO bus, if no phy-handle and no fixed-link nodes were present. The -ENODEV error code from the first attempt (phylink_of_phy_connect) is what triggers the second attempt (phylink_connect_phy). However, when the first attempt returns a different error code than -ENODEV, this results in an unbalance of calls to phylink_create and phylink_destroy by the time we exit the function. The phylink instance has leaked. There are many other error codes that can be returned by phylink_of_phy_connect. For example, phylink_validate returns -EINVAL. So this is a practical issue too. Fixes: aab9c4067d23 ("net: dsa: Plug in PHYLINK support") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20210914134331.2303380-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
net: dsa: Avoid cross-chip syncing of VLAN filtering mainline inclusion from mainline-v5.18-rc1 commit 108dc8741c203e9d6ce4e973367f1bac20c7192b category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBP4I5 CVE: CVE-2022-49234 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=108dc8741c203e9d6ce4e973367f1bac20c7192b -------------------------------- Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx. Fixes: d371b7c92d19 ("net: dsa: Unset vlan_filtering when ports leave the bridge") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Conflicts: net/dsa/switch.c [381a730182f1, 58adf9dcb15b not merged.] Signed-off-by: Yuan Can <yuancan@huawei.com> | 8 个月前 | |
net: dsa: tag_8021q: fix the VLAN IDs used for encoding sub-VLANs stable inclusion from stable-5.10.43 commit 09fdb6747b7ed3bc4da720301de52ac7b159214a bugzilla: 109284 CVE: NA -------------------------------- [ Upstream commit 4ef8d857b5f494e62bce9085031563fda35f9563 ] When using sub-VLANs in the range of 1-7, the resulting value from: rx_vid = dsa_8021q_rx_vid_subvlan(ds, port, subvlan); is wrong according to the description from tag_8021q.c: | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +-----------+-----+-----------------+-----------+-----------------------+ | DIR | SVL | SWITCH_ID | SUBVLAN | PORT | +-----------+-----+-----------------+-----------+-----------------------+ For example, when ds->index == 0, port == 3 and subvlan == 1, dsa_8021q_rx_vid_subvlan() returns 1027, same as it returns for subvlan == 0, but it should have returned 1043. This is because the low portion of the subvlan bits are not masked properly when writing into the 12-bit VLAN value. They are masked into bits 4:3, but they should be masked into bits 5:4. Fixes: 3eaae1d05f2b ("net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
net: dsa: tag_ar9331: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit 409af8946619cb041d1f031d92dc578fcade5d02 bugzilla: 51348 -------------------------------- [ Upstream commit 86c4ad9a7876777c12fd5a7010152e4141fcb94d ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Cc: Per Forlin <per.forlin@axis.com> Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_brcm: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit 9ad635b75e421a62a300453780e1e3d65dc6014f bugzilla: 51348 -------------------------------- [ Upstream commit 2f0d030c5ffec6660f79a32b4f522155f75a9d71 ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_dsa: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit 9bb1bec952adfe4bac97e073a474dcd80bcde65a bugzilla: 51348 -------------------------------- [ Upstream commit 952a06345015867e3bd37f8d9045fc1429637d43 ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Similar to the EtherType DSA tagger, the old Marvell tagger can transform an 802.1Q header if present into a DSA tag, so there is no headroom required in that case. But we are ensuring that it exists, regardless (practically speaking, the headroom must be 4 bytes larger than it needs to be). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_edsa: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit 67fd35c21a608021e8e8e36ea31176e7d001c24f bugzilla: 51348 -------------------------------- [ Upstream commit c6c4e1237dfe731644e79fa06d073625f28cd945 ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Note that the VLAN code path needs a smaller extra headroom than the regular EtherType DSA path. That isn't a problem, because this tagger declares the larger tag length (8 bytes vs 4) as the protocol overhead, so we are covered in both cases. Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_gswip: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit a2fd181b4b7a81d541dbeec492e676f66584bf87 bugzilla: 51348 -------------------------------- [ Upstream commit 9b9826ae117f211bcbdc75db844d5fd8b159fc59 ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. This one is interesting, the DSA tag is 8 bytes on RX and 4 bytes on TX. Because DSA is unaware of asymmetrical tag lengths, the overhead/needed headroom is declared as 8 bytes and therefore 4 bytes larger than it needs to be. If this becomes a problem, and the GSWIP driver can't be converted to a uniform header length, we might need to make DSA aware of separate RX/TX overhead values. Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: ksz: Check return value stable inclusion from stable-v5.10.159 commit bccda3ad0748958473eb730e29c0487007a98832 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7NTXH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=bccda3ad0748958473eb730e29c0487007a98832 -------------------------------- [ Upstream commit 3d8fdcbf1f42e2bb9ae8b8c0b6f202278c788a22 ] Return NULL if we got unexpected value from skb_trim_rcsum() in ksz_common_rcv() Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bafe9ba7d908 ("net: dsa: ksz: Factor out common tag code") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: sanglipeng <sanglipeng1@jd.com> | 2 年前 | |
net: dsa: tag_lan9303: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit 6702dd45534ade8408aa540ff936f9e4c227c29d bugzilla: 51348 -------------------------------- [ Upstream commit 6ed94135f58372cdec34cafb60f7596893b0b371 ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_mtk: fix 802.1ad VLAN egress stable inclusion from stable-5.10.24 commit 606cfdeebd3d0f79b0acb2b7da5556318097698a bugzilla: 51348 -------------------------------- [ Upstream commit 9200f515c41f4cbaeffd8fdd1d8b6373a18b1b67 ] A different TPID bit is used for 802.1ad VLAN frames. Reported-by: Ilario Gelmetti <iochesonome@gmail.com> Fixes: f0af34317f4b ("net: dsa: mediatek: combine MediaTek tag with VLAN tag") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_ocelot: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit 54787024c8fbc1805adce37d79a0ad6a6119899b bugzilla: 51348 -------------------------------- [ Upstream commit 9c5c3bd00557e57c1049f7861f11e5e39f0fb42d ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_qca: let DSA core deal with TX reallocation stable inclusion from stable-5.10.24 commit cf5c6682e27478f78fe237c90a5c5cd28558df3e bugzilla: 51348 -------------------------------- [ Upstream commit 9bbda29ae1044bc4c1c01a5b7c44688c4765785f ] Now that we have a central TX reallocation procedure that accounts for the tagger's needed headroom in a generic way, we can remove the skb_cow_head call. Cc: John Crispin <john@phrozen.org> Cc: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 | |
net: dsa: tag_rtl4_a: Fix egress tags stable inclusion from stable-5.10.68 commit 5711ced58eb4ad37b3b71409294505abe572e26b bugzilla: 182671 https://gitee.com/openeuler/kernel/issues/I4EWUH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=5711ced58eb4ad37b3b71409294505abe572e26b -------------------------------- [ Upstream commit 0e90dfa7a8d817db755c7b5d89d77b9c485e4180 ] I noticed that only port 0 worked on the RTL8366RB since we started to use custom tags. It turns out that the format of egress custom tags is actually different from ingress custom tags. While the lower bits just contain the port number in ingress tags, egress tags need to indicate destination port by setting the bit for the corresponding port. It was working on port 0 because port 0 added 0x00 as port number in the lower bits, and if you do this the packet appears at all ports, including the intended port. Ooops. Fix this and all ports work again. Use the define for shifting the "type A" into place while we're at it. Tested on the D-Link DIR-685 by sending traffic to each of the ports in turn. It works. Fixes: 86dd9868b878 ("net: dsa: tag_rtl4_a: Support also egress tags") Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
net: dsa: tag_sja1105: fix MAC DA patching from meta frames stable inclusion from stable-v5.10.188 commit 9f5548e4214d260ed0c9ec0394d7b4bae4015029 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8KYFP Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=9f5548e4214d260ed0c9ec0394d7b4bae4015029 -------------------------------- [ Upstream commit 1dcf6efd5f0c1f4496b3ef7ec5a7db104a53b38c ] The SJA1105 manual says that at offset 4 into the meta frame payload we have "MAC destination byte 2" and at offset 5 we have "MAC destination byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2] aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3]. The sja1105_meta_unpack() function decodes these the other way around, so a frame with MAC DA 01:80:c2:11:22:33 is received by the network stack as having 01:80:c2:22:11:33. Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: sanglipeng <sanglipeng1@jd.com> | 2 年前 | |
net: dsa: trailer: don't allocate additional memory for padding/tagging stable inclusion from stable-5.10.24 commit 8f17133cc3ae085e84a9ced7f71ba04911424ddc bugzilla: 51348 -------------------------------- [ Upstream commit ef3f72fee286bd270453ce2344feb7295a798508 ] The caller (dsa_slave_xmit) guarantees that the frame length is at least ETH_ZLEN and that enough memory for tail tagging is available. Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 5 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 6 个月前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 8 个月前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 5 年前 |