| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
perf stat: Enable iostat mode for x86 platforms mainline inclusion from mainline-v5.13-rc1 commit f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 ---------------------------------------------------------------------- This functionality is based on recently introduced sysfs attributes for Intel® Xeon® Scalable processor family (code name Skylake-SP): Commit bb42b3d39781d7fc ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping") Mode is intended to provide four I/O performance metrics in MB per each PCIe root port: - Inbound Read: I/O devices below root port read from the host memory - Inbound Write: I/O devices below root port write to the host memory - Outbound Read: CPU reads from I/O devices below root port - Outbound Write: CPU writes to I/O devices below root port Each metric requiries only one uncore event which increments at every 4B transfer in corresponding direction. The formulas to compute metrics are generic: #EventCount * 4B / (1024 * 1024) Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *' mainline inclusion from mainline-v5.15-rc4 commit 4da8b121884d84476f3d50d46a471471af1aa9df category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4da8b121884d84476f3d50d46a471471af1aa9df ---------------------------------------------------------------------- If the 'perf iostat' user specifies two or more iio_root_ports and also specifies the cpu(s) by -C which is not *connected to all* the above iio ports, the iostat_print_metric() will run into trouble: For example: $ perf iostat list S0-uncore_iio_0<0000:16> S1-uncore_iio_0<0000:97> # <--- CPU 1 is located in the socket S0 $ perf iostat 0000:16,0000:97 -C 1 -- ls port Inbound Read(MB) Inbound Write(MB) Outbound Read(MB) Outbound Write(MB) ../perf-iostat: line 12: 104418 Segmentation fault (core dumped) perf stat --iostat$DELIMITER$* The core-dump stack says, in the above corner case, the returned (struct perf_counts_values *) count will be NULL, and the caller iostat_print_metric() apparently doesn't not handle this case. 433 struct perf_counts_values *count = perf_counts(evsel->counts, die, 0); 434 435 if (count->run && count->ena) { (gdb) p count $1 = (struct perf_counts_values *) 0x0 The deeper reason is that there are actually no statistics from the user specified pair "iostat 0000:X, -C (disconnected) Y ", but let's fix it with minimum cost by adding a NULL check in the user space. Fixes: f9ed693e8bc0e7de ("perf stat: Enable iostat mode for x86 platforms") Signed-off-by: Like Xu <likexu@tencent.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210927081115.39568-2-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' stable inclusion from stable-v6.10.0 commit 7f02ce62a6cfc0feb164bb7eb36c6647c00b43c8 category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/8351 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7f02ce62a6cfc0feb164bb7eb36c6647c00b43c8 -------------------------------- This is to get the changes from: 68674f94ffc9dddc ("x86: don't use REP_GOOD or ERMS for small memory copies") 20f3337d350c4e1b ("x86: don't use REP_GOOD or ERMS for small memory clearing") This also make the 'perf bench mem' files stop referring to the erms versions that gone away with the above patches. That addresses these perf tools build warning: Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S' diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S' diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: shiguangyin <shiguangyin@inspur.com> | 5 个月前 | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ... | 6 年前 | |
perf bpf: Remove bpf/ subdir from bpf.h headers used to build bpf events The bpf.h file needed gets installed in /usr/lib/include/perf/bpf/bpf.h, and /usr/lib/include/perf/ is added to the include path passed to clang to build the eBPF bytecode, so just remove "bpf/", its directly in the path passed already. This was working by accident, fix it. I.e. now this is back working: # cat /home/acme/git/perf/tools/perf/examples/bpf/hello.c #include <stdio.h> int syscall_enter(openat)(void *args) { puts("Hello, world\n"); return 0; } license(GPL); # perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/hello.c 0.000 pickup/21493 __bpf_stdout__(Hello, world) 56.462 sh/13539 __bpf_stdout__(Hello, world) 56.536 sh/13539 __bpf_stdout__(Hello, world) 56.673 sh/13539 __bpf_stdout__(Hello, world) 56.781 sh/13539 __bpf_stdout__(Hello, world) 56.707 perf/13182 __bpf_stdout__(Hello, world) 56.849 perf/13182 __bpf_stdout__(Hello, world) ^C # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-d9myswhgo8gfi3vmehdqpxa7@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
perf jvmti: Remove redundant jitdump line table entries For each PC/BCI pair in the JVMTI compiler inlining record table, the jitdump plugin emits debug line table entries for every source line in the method preceding that BCI. Instead only emit one source line per PC/BCI pair. Reported by Ian Rogers. This reduces the .dump size for SPECjbb from ~230MB to ~40MB. Signed-off-by: Nick Gasson <nick.gasson@arm.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200528054049.13662-1-nick.gasson@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf vendor events: Add Clearwaterforest events mainline inclusion from mainline-v6.15-rc1 commit e415c1493fa1e93afaec697385b8952d932c41bc category: feature bugzilla: https://gitee.com/src-openeuler/kernel/issues/ID2L3S CVE: N/A Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e415c1493fa1e93afaec697385b8952d932c41bc ------------------------------------- Intel-SIG: commit e415c1493fa1 ("perf vendor events: Add Clearwaterforest events") ------------------------------------- perf vendor events: Add Clearwaterforest events Add events v1.00. Bring in the events from: https://github.com/intel/perfmon/tree/main/CWF/events Co-developed-by: Caleb Biggers <caleb.biggers@intel.com> Signed-off-by: Caleb Biggers <caleb.biggers@intel.com> Acked-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Falcon <thomas.falcon@intel.com> Link: https://lore.kernel.org/r/20250211213031.114209-9-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Quanxian Wang <quanxian.wang@intel.com> | 8 个月前 | |
tweewide: Fix most Shebang lines stable inclusion from stable-5.10.39 commit 6ae514b8a8eb675df9d746693726a72d46f2391d bugzilla: 51881 CVE: NA -------------------------------- commit c25ce589dca10d64dde139ae093abc258a32869c upstream. Change every shebang which does not need an argument to use /usr/bin/env. This is needed as not every distro has everything under /usr/bin, sometimes not even bash. Signed-off-by: Finn Behrens <me@kloenk.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf scripts python: exported-sql-viewer.py: Fix warning display stable inclusion from stable-5.10.42 commit 03b777ce8d7030f7b9d69c77eb706cf6b134655c bugzilla: 55093 CVE: NA -------------------------------- commit f56299a9c998e0bfbd4ab07cafe9eb8444512448 upstream. Deprecation warnings are useful only for the developer, not an end user. Display warnings only when requested using the python -W option. This stops the display of warnings like: tools/perf/scripts/python/exported-sql-viewer.py:5102: DeprecationWarning: an integer is required (got type PySide2.QtCore.Qt.AlignmentFlag). Implicit conversion to integers using __int__ is deprecated, and may be removed in a future version of Python. err = app.exec_() Since the warning can be fixed only in PySide2, we must wait for it to be finally fixed there. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v5.3+ Link: http://lore.kernel.org/lkml/20210521092053.25683-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf test bpf: Address error about non-null argument for epoll_pwait 2nd arg mainline inclusion from mainline-v6.6-rc1 commit ed847e30f001b207013b6136c264454d7560557f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ID44PJ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ed847e30f001b207013b6136c264454d7560557f -------------------------------- First noticed on Fedora Rawhide: tests/bpf.c: In function ‘epoll_pwait_loop’: tests/bpf.c:36:17: error: argument 2 null where non-null expected [-Werror=nonnull] 36 | epoll_pwait(-(i + 1), NULL, 0, 0, NULL); | ^~~~~~~~~~~ In file included from tests/bpf.c:5: /usr/include/sys/epoll.h:134:12: note: in a call to function ‘epoll_pwait’ declared ‘nonnull’ 134 | extern int epoll_pwait (int __epfd, struct epoll_event *__events, | ^~~~~~~~~~~ [perfbuilder@27cfe44d67ed perf-6.5.0-rc2]$ gcc -v Using built-in specs. COLLECT_GCC=gcc COLLECT_LTO_WRAPPER=/usr/libexec/gcc/x86_64-redhat-linux/13/lto-wrapper OFFLOAD_TARGET_NAMES=nvptx-none OFFLOAD_TARGET_DEFAULT=1 Target: x86_64-redhat-linux Configured with: ../configure --enable-bootstrap --enable-languages=c,c++,fortran,objc,obj-c++,ada,go,d,m2,lto --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=http://bugzilla.redhat.com/bugzilla --enable-shared --enable-threads=posix --enable-checking=release --enable-multilib --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-gnu-unique-object --enable-linker-build-id --with-gcc-major-version-only --enable-libstdcxx-backtrace --with-libstdcxx-zoneinfo=/usr/share/zoneinfo --with-linker-hash-style=gnu --enable-plugin --enable-initfini-array --with-isl=/builddir/build/BUILD/gcc-13.2.1-20230728/obj-x86_64-redhat-linux/isl-install --enable-offload-targets=nvptx-none --without-cuda-driver --enable-offload-defaulted --enable-gnu-indirect-function --enable-cet --with-tune=generic --with-arch_32=i686 --build=x86_64-redhat-linux --with-build-config=bootstrap-lto --enable-link-serialization=1 Thread model: posix Supported LTO compression algorithms: zlib zstd gcc version 13.2.1 20230728 (Red Hat 13.2.1-1) (GCC) [perfbuilder@27cfe44d67ed perf-6.5.0-rc2]$ Just add that argument to address this compiler warning. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/ZMj8+bvN86D0ZKiB@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Tengda Wu <wutengda2@huawei.com> | 7 个月前 | |
tools arch x86: Sync the msr-index.h copy with the kernel sources mainline inclusion from mainline-v5.11-rc1 commit fde668244d1d8d490b5b9daf53fe4f92a6751773 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7RQ67 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=fde668244d1d8d490b5b9daf53fe4f92a6751773 -------------------------------- To pick up the changes in: Fixes: 69372cf01290b958 ("x86/cpu: Add VM page flush MSR availablility as a CPUID feature") That cause these changes in tooling: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2020-12-21 09:09:05.593005003 -0300 +++ after 2020-12-21 09:12:48.436994802 -0300 @@ -21,7 +21,7 @@ [0x0000004f] = "PPIN", [0x00000060] = "LBR_CORE_TO", [0x00000079] = "IA32_UCODE_WRITE", - [0x0000008b] = "IA32_UCODE_REV", + [0x0000008b] = "AMD64_PATCH_LEVEL", [0x0000008C] = "IA32_SGXLEPUBKEYHASH0", [0x0000008D] = "IA32_SGXLEPUBKEYHASH1", [0x0000008E] = "IA32_SGXLEPUBKEYHASH2", @@ -286,6 +286,7 @@ [0xc0010114 - x86_AMD_V_KVM_MSRs_offset] = "VM_CR", [0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE", [0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA", + [0xc001011e - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VM_PAGE_FLUSH", [0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL", [0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB", [0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV", $ The new MSR has a pattern that wasn't matched to avoid a clash with IA32_UCODE_REV, change the regex to prefer the more relevant AMD_ prefixed ones to catch this new AMD64_VM_PAGE_FLUSH MSR. Which causes these parts of tools/perf/ to be rebuilt: CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o LD /tmp/build/perf/trace/beauty/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf This addresses this perf tools build warning: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jialin Zhang <zhangjialin11@huawei.com> | 2 年前 | |
perf hists browser: Fix the number of entries for 'e' key stable inclusion from stable-v5.10.195 commit c6dc2a2e11c28f98ce9a0a4de67a7a47f5cab9ac category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I95JOC Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=c6dc2a2e11c28f98ce9a0a4de67a7a47f5cab9ac -------------------------------- commit f6b8436bede3e80226e8b2100279c4450c73806a upstream. The 'e' key is to toggle expand/collapse the selected entry only. But the current code has a bug that it only increases the number of entries by 1 in the hierarchy mode so users cannot move under the current entry after the key stroke. This is due to a wrong assumption in the hist_entry__set_folding(). The commit b33f922651011eff ("perf hists browser: Put hist_entry folding logic into single function") factored out the code, but actually it should be handled separately. The hist_browser__set_folding() is to update fold state for each entry so it needs to traverse all (child) entries regardless of the current fold state. So it increases the number of entries by 1. But the hist_entry__set_folding() only cares the currently selected entry and its all children. So it should count all unfolded child entries. This code is implemented in hist_browser__toggle_fold() already so we can just call it. Fixes: b33f922651011eff ("perf hists browser: Put hist_entry folding logic into single function") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230731094934.1616495-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: sanglipeng <sanglipeng1@jd.com> | 2 年前 | |
perf arm_spe: Correct memory level for remote access mainline inclusion from mainline-v6.18-rc1 commit cb300e3515057fb555983ce47e8acc86a5c69c3c category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cb300e3515057fb555983ce47e8acc86a5c69c3c ---------------------------------------------------------------------- For remote accesses, the data source packet does not contain information about the memory level. To avoid misinformation, set the memory level to NA (Not Available). Fixes: 4e6430cbb1a9f1dc ("perf arm-spe: Use SPE data source for neoverse cores") Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Leo Yan <leo.yan@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ali Saidi <alisaidi@amazon.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf: Update .gitignore file mainline inclusion from mainline-v5.13-rc2 commit 537f1e38f31a2d2b9941f16d6e2a9ab24cdab086 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=537f1e38f31a2d2b9941f16d6e2a9ab24cdab086 ---------------------------------------------------------------------- After a "make -C tools/perf", git reports the following untracked file: perf-iostat Add this generated file to perf's .gitignore file. Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-5-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf tools: Rename build libperf to perf Rename build libperf to perf, because it's used to build perf. The libperf build object name will be used for libperf library. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190213123246.4015-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 7 年前 | |
perf_counter tools: Add CREDITS file for Git contributors Much of perf's libraries comes from the Git project. I noticed that the files (in tools/perf/util/*.[ch] and elsewhere) are quite spartan wrt. credits, so lets add a CREDITS file that includes an (incomplete!) list of main contributors. Thanks guys, these libraries are really useful. Special thanks go to Johannes Schindelin and Junio C Hamano for coming up with this list. List-Composed-By: Johannes Schindelin <Johannes.Schindelin@gmx.de> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 16 年前 | |
libperf: Move to tools/lib/perf Move libperf from its current location under tools/perf to a separate directory under tools/lib/. Also change various paths (mainly includes) to reflect the libperf move to a separate directory and add a new directory under MANIFEST. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191206210612.8676-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
tools: Let O= makes handle a relative path with -C option When I tried to compile tools/perf from the top directory with the -C option, the O= option didn't work correctly if I passed a relative path: $ make O=BUILD -C tools/perf/ make: Entering directory '/home/mhiramat/ksrc/linux/tools/perf' BUILD: Doing 'make -j8' parallel build ../scripts/Makefile.include:4: *** O=/home/mhiramat/ksrc/linux/tools/perf/BUILD does not exist. Stop. make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/mhiramat/ksrc/linux/tools/perf' The O= directory existence check failed because the check script ran in the build target directory instead of the directory where I ran the make command. To fix that, once change directory to $(PWD) and check O= directory, since the PWD is set to where the make command runs. Fixes: c883122acc0d ("perf tools: Let O= makes handle relative paths") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158351957799.3363.15269768530697526765.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
perf: Always feature test reallocarray mainline inclusion from mainline-v6.15 commit 4c4c0724d6521a8092b7c16f8f210c5869d95b17 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICTUCR Reference: https://github.com/torvalds/linux/commit/4c4c0724d6521a8092b7c16f8f210c5869d95b17 -------------------------------- This is also used in util/comm.c now, so instead of selectively doing the feature test, always do it. If it's ever used anywhere else it's less likely to cause another build failure. This doesn't remove the need to manually include libc_compat.h, and missing that will still cause an error for glibc < 2.26. There isn't a way to fix that without poisoning reallocarray like libbpf did, but that has other downsides like making memory debugging tools less useful. So for Perf keep it like this and we'll have to fix up any missed includes. Resolve the following build error: util/comm.c:152:31: error: implicit declaration of function 'reallocarray' [-Wimplicit-function-declaration] 152 | tmp = reallocarray(comm_strs->strs, | ^~~~~~~~~~~~ Fixes: 13ca628716c6 ("perf comm: Add reference count checking to 'struct comm_str'") Reported-by: Ali Utku Selen <ali.utku.selen@arm.com> Link: https://lore.kernel.org/r/20250129154405.777533-1-james.clark@linaro.org Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: langfei <langfei@huawei.com> | 8 个月前 | |
perf stat: Enable iostat mode for x86 platforms mainline inclusion from mainline-v5.13-rc1 commit f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 ---------------------------------------------------------------------- This functionality is based on recently introduced sysfs attributes for Intel® Xeon® Scalable processor family (code name Skylake-SP): Commit bb42b3d39781d7fc ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping") Mode is intended to provide four I/O performance metrics in MB per each PCIe root port: - Inbound Read: I/O devices below root port read from the host memory - Inbound Write: I/O devices below root port write to the host memory - Outbound Read: CPU reads from I/O devices below root port - Outbound Write: CPU writes to I/O devices below root port Each metric requiries only one uncore event which increments at every 4B transfer in corresponding direction. The formulas to compute metrics are generic: #EventCount * 4B / (1024 * 1024) Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf annotate: Add itrace options support mainline inclusion from mainline-v5.14-rc1 commit 4bcbe438b3baaeb532dd50a5f002aed56c197e2a category: feature bugzilla: 182229 https://gitee.com/openeuler/kernel/issues/I4DDEL Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=4bcbe438b3baaeb532dd50a5f002aed56c197e2a ------------------------------------------------- The "auxtrace_info" and "auxtrace" functions are not set in "tool" member of "annotate". As a result, perf annotate does not support parsing itrace data. Before: # perf record -e arm_spe_0/branch_filter=1/ -a sleep 1 [ perf record: Woken up 9 times to write data ] [ perf record: Captured and wrote 20.874 MB perf.data ] # perf annotate --stdio Error: The perf.data data has no samples! Solution: 1. Add itrace options in help, 2. Set hook functions of "id_index", "auxtrace_info" and "auxtrace" in perf_tool. After: # perf record --all-user -e arm_spe_0/branch_filter=1/ ls Couldn't synthesize bpf events. perf.data [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.010 MB perf.data ] # perf annotate --stdio Percent | Source code & Disassembly of libc-2.28.so for branch-miss (1 samples, percent: local period) ------------------------------------------------------------------------------------------------------------ : : : : Disassembly of section .text: : : 0000000000066180 <__getdelim@@GLIBC_2.17>: 0.00 : 66180: stp x29, x30, [sp, #-96]! 0.00 : 66184: cmp x0, #0x0 0.00 : 66188: ccmp x1, #0x0, #0x4, ne // ne = any 0.00 : 6618c: mov x29, sp 0.00 : 66190: stp x24, x25, [sp, #56] 0.00 : 66194: stp x26, x27, [sp, #72] 0.00 : 66198: str x28, [sp, #88] 0.00 : 6619c: b.eq 66450 <__getdelim@@GLIBC_2.17+0x2d0> // b.none 0.00 : 661a0: stp x22, x23, [x29, #40] 0.00 : 661a4: mov x22, x1 0.00 : 661a8: ldr w1, [x3] 0.00 : 661ac: mov w23, w2 0.00 : 661b0: stp x20, x21, [x29, #24] 0.00 : 661b4: mov x20, x3 0.00 : 661b8: mov x21, x0 0.00 : 661bc: tbnz w1, #15, 66360 <__getdelim@@GLIBC_2.17+0x1e0> 0.00 : 661c0: ldr x0, [x3, #136] 0.00 : 661c4: ldr x2, [x0, #8] 0.00 : 661c8: str x19, [x29, #16] 0.00 : 661cc: mrs x19, tpidr_el0 0.00 : 661d0: sub x19, x19, #0x700 0.00 : 661d4: cmp x2, x19 0.00 : 661d8: b.eq 663f0 <__getdelim@@GLIBC_2.17+0x270> // b.none 0.00 : 661dc: mov w1, #0x1 // #1 0.00 : 661e0: ldaxr w2, [x0] 0.00 : 661e4: cmp w2, #0x0 0.00 : 661e8: b.ne 661f4 <__getdelim@@GLIBC_2.17+0x74> // b.any 0.00 : 661ec: stxr w3, w1, [x0] 0.00 : 661f0: cbnz w3, 661e0 <__getdelim@@GLIBC_2.17+0x60> 0.00 : 661f4: b.ne 66448 <__getdelim@@GLIBC_2.17+0x2c8> // b.any 0.00 : 661f8: ldr x0, [x20, #136] 0.00 : 661fc: ldr w1, [x20] 0.00 : 66200: ldr w2, [x0, #4] 0.00 : 66204: str x19, [x0, #8] 0.00 : 66208: add w2, w2, #0x1 0.00 : 6620c: str w2, [x0, #4] 0.00 : 66210: tbnz w1, #5, 66388 <__getdelim@@GLIBC_2.17+0x208> 0.00 : 66214: ldr x19, [x29, #16] 0.00 : 66218: ldr x0, [x21] 0.00 : 6621c: cbz x0, 66228 <__getdelim@@GLIBC_2.17+0xa8> 0.00 : 66220: ldr x0, [x22] 0.00 : 66224: cbnz x0, 6623c <__getdelim@@GLIBC_2.17+0xbc> 0.00 : 66228: mov x0, #0x78 // #120 0.00 : 6622c: str x0, [x22] 0.00 : 66230: bl 20710 <malloc@plt> 0.00 : 66234: str x0, [x21] 0.00 : 66238: cbz x0, 66428 <__getdelim@@GLIBC_2.17+0x2a8> 0.00 : 6623c: ldr x27, [x20, #8] 0.00 : 66240: str x19, [x29, #16] 0.00 : 66244: ldr x19, [x20, #16] 0.00 : 66248: sub x19, x19, x27 0.00 : 6624c: cmp x19, #0x0 0.00 : 66250: b.le 66398 <__getdelim@@GLIBC_2.17+0x218> 0.00 : 66254: mov x25, #0x0 // #0 0.00 : 66258: b 662d8 <__getdelim@@GLIBC_2.17+0x158> 0.00 : 6625c: nop 0.00 : 66260: add x24, x19, x25 0.00 : 66264: ldr x3, [x22] 0.00 : 66268: add x26, x24, #0x1 0.00 : 6626c: ldr x0, [x21] 0.00 : 66270: cmp x3, x26 0.00 : 66274: b.cs 6629c <__getdelim@@GLIBC_2.17+0x11c> // b.hs, b.nlast 0.00 : 66278: lsl x3, x3, #1 0.00 : 6627c: cmp x3, x26 0.00 : 66280: csel x26, x3, x26, cs // cs = hs, nlast 0.00 : 66284: mov x1, x26 0.00 : 66288: bl 206f0 <realloc@plt> 0.00 : 6628c: cbz x0, 66438 <__getdelim@@GLIBC_2.17+0x2b8> 0.00 : 66290: str x0, [x21] 0.00 : 66294: ldr x27, [x20, #8] 0.00 : 66298: str x26, [x22] 0.00 : 6629c: mov x2, x19 0.00 : 662a0: mov x1, x27 0.00 : 662a4: add x0, x0, x25 0.00 : 662a8: bl 87390 <explicit_bzero@@GLIBC_2.25+0x50> 0.00 : 662ac: ldr x0, [x20, #8] 0.00 : 662b0: add x19, x0, x19 0.00 : 662b4: str x19, [x20, #8] 0.00 : 662b8: cbnz x28, 66410 <__getdelim@@GLIBC_2.17+0x290> 0.00 : 662bc: mov x0, x20 0.00 : 662c0: bl 73b80 <__underflow@@GLIBC_2.17> 0.00 : 662c4: cmn w0, #0x1 0.00 : 662c8: b.eq 66410 <__getdelim@@GLIBC_2.17+0x290> // b.none 0.00 : 662cc: ldp x27, x19, [x20, #8] 0.00 : 662d0: mov x25, x24 0.00 : 662d4: sub x19, x19, x27 0.00 : 662d8: mov x2, x19 0.00 : 662dc: mov w1, w23 0.00 : 662e0: mov x0, x27 0.00 : 662e4: bl 807b0 <memchr@@GLIBC_2.17> 0.00 : 662e8: cmp x0, #0x0 0.00 : 662ec: mov x28, x0 0.00 : 662f0: sub x0, x0, x27 0.00 : 662f4: csinc x19, x19, x0, eq // eq = none 0.00 : 662f8: mov x0, #0x7fffffffffffffff // #9223372036854775807 0.00 : 662fc: sub x0, x0, x25 0.00 : 66300: cmp x19, x0 0.00 : 66304: b.lt 66260 <__getdelim@@GLIBC_2.17+0xe0> // b.tstop 0.00 : 66308: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320> 0.00 : 6630c: ldr x0, [x0, #3624] 0.00 : 66310: mrs x2, tpidr_el0 0.00 : 66314: ldr x19, [x29, #16] 0.00 : 66318: mov w3, #0x4b // #75 0.00 : 6631c: ldr w1, [x20] 0.00 : 66320: mov x24, #0xffffffffffffffff // #-1 0.00 : 66324: str w3, [x2, x0] 0.00 : 66328: tbnz w1, #15, 66340 <__getdelim@@GLIBC_2.17+0x1c0> 0.00 : 6632c: ldr x0, [x20, #136] 0.00 : 66330: ldr w1, [x0, #4] 0.00 : 66334: sub w1, w1, #0x1 0.00 : 66338: str w1, [x0, #4] 0.00 : 6633c: cbz w1, 663b8 <__getdelim@@GLIBC_2.17+0x238> 0.00 : 66340: mov x0, x24 0.00 : 66344: ldr x28, [sp, #88] 0.00 : 66348: ldp x20, x21, [x29, #24] 0.00 : 6634c: ldp x22, x23, [x29, #40] 0.00 : 66350: ldp x24, x25, [sp, #56] 0.00 : 66354: ldp x26, x27, [sp, #72] 0.00 : 66358: ldp x29, x30, [sp], #96 0.00 : 6635c: ret 100.00 : 66360: tbz w1, #5, 66218 <__getdelim@@GLIBC_2.17+0x98> 0.00 : 66364: ldp x20, x21, [x29, #24] 0.00 : 66368: mov x24, #0xffffffffffffffff // #-1 0.00 : 6636c: ldp x22, x23, [x29, #40] 0.00 : 66370: mov x0, x24 0.00 : 66374: ldp x24, x25, [sp, #56] 0.00 : 66378: ldp x26, x27, [sp, #72] 0.00 : 6637c: ldr x28, [sp, #88] 0.00 : 66380: ldp x29, x30, [sp], #96 0.00 : 66384: ret 0.00 : 66388: mov x24, #0xffffffffffffffff // #-1 0.00 : 6638c: ldr x19, [x29, #16] 0.00 : 66390: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66394: nop 0.00 : 66398: mov x0, x20 0.00 : 6639c: bl 73b80 <__underflow@@GLIBC_2.17> 0.00 : 663a0: cmn w0, #0x1 0.00 : 663a4: b.eq 66438 <__getdelim@@GLIBC_2.17+0x2b8> // b.none 0.00 : 663a8: ldp x27, x19, [x20, #8] 0.00 : 663ac: sub x19, x19, x27 0.00 : 663b0: b 66254 <__getdelim@@GLIBC_2.17+0xd4> 0.00 : 663b4: nop 0.00 : 663b8: str xzr, [x0, #8] 0.00 : 663bc: ldxr w2, [x0] 0.00 : 663c0: stlxr w3, w1, [x0] 0.00 : 663c4: cbnz w3, 663bc <__getdelim@@GLIBC_2.17+0x23c> 0.00 : 663c8: cmp w2, #0x1 0.00 : 663cc: b.le 66340 <__getdelim@@GLIBC_2.17+0x1c0> 0.00 : 663d0: mov x1, #0x81 // #129 0.00 : 663d4: mov x2, #0x1 // #1 0.00 : 663d8: mov x3, #0x0 // #0 0.00 : 663dc: mov x8, #0x62 // #98 0.00 : 663e0: svc #0x0 0.00 : 663e4: ldp x20, x21, [x29, #24] 0.00 : 663e8: ldp x22, x23, [x29, #40] 0.00 : 663ec: b 66370 <__getdelim@@GLIBC_2.17+0x1f0> 0.00 : 663f0: ldr w2, [x0, #4] 0.00 : 663f4: add w2, w2, #0x1 0.00 : 663f8: str w2, [x0, #4] 0.00 : 663fc: tbz w1, #5, 66214 <__getdelim@@GLIBC_2.17+0x94> 0.00 : 66400: mov x24, #0xffffffffffffffff // #-1 0.00 : 66404: ldr x19, [x29, #16] 0.00 : 66408: b 66330 <__getdelim@@GLIBC_2.17+0x1b0> 0.00 : 6640c: nop 0.00 : 66410: ldr x0, [x21] 0.00 : 66414: strb wzr, [x0, x24] 0.00 : 66418: ldr w1, [x20] 0.00 : 6641c: ldr x19, [x29, #16] 0.00 : 66420: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66424: nop 0.00 : 66428: mov x24, #0xffffffffffffffff // #-1 0.00 : 6642c: ldr w1, [x20] 0.00 : 66430: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66434: nop 0.00 : 66438: mov x24, #0xffffffffffffffff // #-1 0.00 : 6643c: ldr w1, [x20] 0.00 : 66440: ldr x19, [x29, #16] 0.00 : 66444: b 66328 <__getdelim@@GLIBC_2.17+0x1a8> 0.00 : 66448: bl e3ba0 <pthread_setcanceltype@@GLIBC_2.17+0x30> 0.00 : 6644c: b 661f8 <__getdelim@@GLIBC_2.17+0x78> 0.00 : 66450: adrp x0, 17f000 <sys_sigabbrev@@GLIBC_2.17+0x320> 0.00 : 66454: ldr x0, [x0, #3624] 0.00 : 66458: mrs x1, tpidr_el0 0.00 : 6645c: mov w2, #0x16 // #22 0.00 : 66460: mov x24, #0xffffffffffffffff // #-1 0.00 : 66464: str w2, [x1, x0] 0.00 : 66468: b 66370 <__getdelim@@GLIBC_2.17+0x1f0> 0.00 : 6646c: ldr w1, [x20] 0.00 : 66470: mov x4, x0 0.00 : 66474: tbnz w1, #15, 6648c <__getdelim@@GLIBC_2.17+0x30c> 0.00 : 66478: ldr x0, [x20, #136] 0.00 : 6647c: ldr w1, [x0, #4] 0.00 : 66480: sub w1, w1, #0x1 0.00 : 66484: str w1, [x0, #4] 0.00 : 66488: cbz w1, 66494 <__getdelim@@GLIBC_2.17+0x314> 0.00 : 6648c: mov x0, x4 0.00 : 66490: bl 20e40 <gnu_get_libc_version@@GLIBC_2.17+0x130> 0.00 : 66494: str xzr, [x0, #8] 0.00 : 66498: ldxr w2, [x0] 0.00 : 6649c: stlxr w3, w1, [x0] 0.00 : 664a0: cbnz w3, 66498 <__getdelim@@GLIBC_2.17+0x318> 0.00 : 664a4: cmp w2, #0x1 0.00 : 664a8: b.le 6648c <__getdelim@@GLIBC_2.17+0x30c> 0.00 : 664ac: mov x1, #0x81 // #129 0.00 : 664b0: mov x2, #0x1 // #1 0.00 : 664b4: mov x3, #0x0 // #0 0.00 : 664b8: mov x8, #0x62 // #98 0.00 : 664bc: svc #0x0 0.00 : 664c0: b 6648c <__getdelim@@GLIBC_2.17+0x30c> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Tested-by: Leo Yan <leo.yan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210615091704.259202-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf bench: Add missing setlocale() call to allow usage of %'d style formatting stable inclusion from stable-v5.10.188 commit 4b63caf86edacd79bec6bfb09f9aaae0433566d3 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8KYFP Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=4b63caf86edacd79bec6bfb09f9aaae0433566d3 -------------------------------- [ Upstream commit 16203e9cd01896b4244100a8e3fb9f6e612ab2b1 ] Without this we were not getting the thousands separator for big numbers. Noticed while developing 'perf bench uprobe', but the use of %' predates that, for instance 'perf bench syscall' uses it. Before: # perf bench uprobe all # Running uprobe/baseline benchmark... # Executed 1000 usleep(1000) calls Total time: 1054082243ns 1054082.243000 nsecs/op # After: # perf bench uprobe all # Running uprobe/baseline benchmark... # Executed 1,000 usleep(1000) calls Total time: 1,053,715,144ns 1,053,715.144000 nsecs/op # Fixes: c2a08203052f8975 ("perf bench: Add basic syscall benchmark") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andre Fredette <anfredet@redhat.com> Cc: Clark Williams <williams@redhat.com> Cc: Dave Tucker <datucker@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Derek Barbosa <debarbos@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tiezhu Yang <yangtiezhu@loongson.cn> Link: https://lore.kernel.org/lkml/ZH3lcepZ4tBYr1jv@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: sanglipeng <sanglipeng1@jd.com> | 2 年前 | |
perf tools: Pass build_id object to build_id__sprintf() Passing build_id object to build_id__sprintf function, so it can operate with the proper size of build id. This will create proper md5 build id readable names, like following: a50e350e97c43b4708d09bcd85ebfff7 instead of: a50e350e97c43b4708d09bcd85ebfff700000000 Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20201013192441.1299447-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
perf cpumap: Wrapper for CPU map indices driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IAQFZR CVE: NA ---------------------------------------------------------------------- Linux mainline changed the type of perf CPU map into struct perf_cpu to avoid confuses of CPU maps from cpu. The change affects a lot of infrastructures of Perf tool which this patchset depends on to fix perf undesirably scrutinizing events on offline CPUs issue[1]. This patch, with the purpose of adapting of following patches from Linux mainline to openeuler, is a mere copy of the patch [2] which changes the type of perf CPU map with careful refaction of affected code. [1] https://lore.kernel.org/lkml/20240603092812.46616-1-yangyicong@huawei.com/ [2] https://lore.kernel.org/r/20220105061351.120843-49-irogers@google.com Signed-off-by: Yushan Wang <wangyushan12@huawei.com> | 1 年前 | |
perf tools: Remove util.h from where it is not needed Check that it is not needed and remove, fixing up some fallout for places where it was only serving to get something else. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-9h6dg6lsqe2usyqjh5rrues4@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
perf data: Add support to store time of day in CTF data conversion Adad support to convert and store time of day in CTF data conversion for 'perf data convert' subcommand. The perf.data used for conversion needs to have clock data information - must be recorded with -k/--clockid option). New --tod option is added to 'perf data convert' subcommand to convert data with timestamps converted to wall clock time. Record data with clockid set: # perf record -k CLOCK_MONOTONIC kill kill: not enough arguments [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.033 MB perf.data (8 samples) ] Convert data with TOD timestamps: # perf data convert --tod --to-ctf ./ctf [ perf data convert: Converted 'perf.data' into CTF data './ctf' ] [ perf data convert: Converted and wrote 0.000 MB (8 samples) ] Display data in perf script: # perf script -F+tod --ns perf 262150 2020-07-13 18:38:50.097678523 153633.958246159: 1 cycles: ... perf 262150 2020-07-13 18:38:50.097682941 153633.958250577: 1 cycles: ... perf 262150 2020-07-13 18:38:50.097684997 153633.958252633: 7 cycles: ... ... Display data in babeltrace: # babeltrace --clock-date ./ctf [2020-07-13 18:38:50.097678523] (+?.?????????) cycles: { cpu_id = 0 }, { perf_ip = 0xFFF ... [2020-07-13 18:38:50.097682941] (+0.000004418) cycles: { cpu_id = 0 }, { perf_ip = 0xFFF ... [2020-07-13 18:38:50.097684997] (+0.000002056) cycles: { cpu_id = 0 }, { perf_ip = 0xFFF ... ... It's available only for recording with clockid specified, because it's the only case where we can get reference time to wallclock time. It's can't do that with perf clock yet. Error is display if you want to use --tod on data without clockid specified: # perf data convert --tod --to-ctf ./ctf Can't provide --tod time, missing clock data. Please record with -k/--clockid option. Failed to setup CTF writer. Error during conversion setup. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Geneviève Bastien <gbastien@versatic.net> Cc: Ian Rogers <irogers@google.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lore.kernel.org/lkml/20200805093444.314999-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf diff: Fix error return value in __cmd_diff() An appropriate return value should be set on the failed path. Fixes: 2a09a84c720b436a ("perf diff: Support hot streams comparison") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201124103652.438-1-thunder.leizhen@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf evsel: Rename perf_evsel__fprintf() to evsel__fprintf() As it is a 'struct evsel' method, not part of tools/lib/perf/, aka libperf, to whom the perf_ prefix belongs. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf ftrace: Fix access to pid in array when setting a pid filter stable inclusion from stable-5.10.35 commit a7c37332afa8916ac55509e3df6a4cfdbb570a4e bugzilla: 51866 CVE: NA -------------------------------- [ Upstream commit 671b60cb6a897a5b3832fe57657152f2c3995e25 ] Command 'perf ftrace -v -- ls' fails in s390 (at least 5.12.0rc6). The root cause is a missing pointer dereference which causes an array element address to be used as PID. Fix this by extracting the PID. Output before: # ./perf ftrace -v -- ls function_graph tracer is used write '-263732416' to tracing/set_ftrace_pid failed: Invalid argument failed to set ftrace pid # Output after: ./perf ftrace -v -- ls function_graph tracer is used # tracer: function_graph # # CPU DURATION FUNCTION CALLS # | | | | | | | 4) | rcu_read_lock_sched_held() { 4) 0.552 us | rcu_lockdep_current_cpu_online(); 4) 6.124 us | } Reported-by: Alexander Schmidt <alexschm@de.ibm.com> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20210421120400.2126433-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Chen Jun <chenjun102@huawei.com> Acked-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf debug: Remove needless include directives from debug.h All we need there is a forward declaration for 'union perf_event', so remove it from there and add missing header directives in places using things from this indirect include. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-7ftk0ztstqub1tirjj8o8xbl@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
perf header: Record non-CPU PMU capabilities mainline inclusion from mainline-v6.0-rc1 commit 2139f7424819818afc25fbfd0effda4babe235f6 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IAU6ZD Reference: https://github.com/torvalds/linux/commit/2139f7424819818afc25fbfd0effda4babe235f6 -------------------------------- commit 2139f7424819818afc25fbfd0effda4babe235f6 upstream PMUs advertise their capabilities via sysfs attribute files but the perf tool currently parses only core(CPU) or hybrid core PMU capabilities. Add support of recording non-core PMU capabilities int perf.data header. Note that a newly proposed HEADER_PMU_CAPS is replacing existing HEADER_HYBRID_CPU_PMU_CAPS. Special care is taken for hybrid core PMUs by writing their capabilities first in the perf.data header to make sure new perf.data file being read by old perf tool does not break. Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@amd.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rrichter@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: like.xu.linux@gmail.com Cc: x86@kernel.org Link: https://lore.kernel.org/r/20220604044519.594-6-ravi.bangoria@amd.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: TauqirAzam <mdtauqir.azamkausar@amd.com> Signed-off-by: PvsNarasimha <PVS.NarasimhaRao@amd.com> | 1 年前 | |
perf dsos: Move the dsos struct and its methods to separate source files So that we can reduce the header dependency tree further, in the process noticed that lots of places were getting even things like build-id routines and 'struct perf_tool' definition indirectly, so fix all those too. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
mm: Introduce memory reliable hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4PM01 CVE: NA -------------------------------- Introduction ============ Memory reliable feature is a memory tiering mechanism. It is based on kernel mirror feature, which splits memory into two sperate regions, mirrored(reliable) region and non-mirrored (non-reliable) region. for kernel mirror feature: - allocate kernel memory from mirrored region by default - allocate user memory from non-mirrored region by default non-mirrored region will be arranged into ZONE_MOVABLE. for kernel reliable feature, it has additional features below: - normal user tasks never alloc memory from mirrored region with userspace apis(malloc, mmap, etc.) - special user tasks will allocate memory from mirrored region by default - tmpfs/pagecache allocate memory from mirrored region by default - upper limit of mirrored region allcated for user tasks, tmpfs and pagecache Support Reliable fallback mechanism which allows special user tasks, tmpfs and pagecache can fallback to alloc non-mirrored region, it's the default setting. In order to fulfil the goal - ___GFP_RELIABLE flag added for alloc memory from mirrored region. - the high_zoneidx for special user tasks/tmpfs/pagecache is set to ZONE_NORMAL. - normal user tasks could only alloc from ZONE_MOVABLE. This patch is just the main framework, memory reliable support for special user tasks, pagecache and tmpfs has own patches. To enable this function, mirrored(reliable) memory is needed and "kernelcore=reliable" should be added to kernel parameters. Signed-off-by: Ma Wupeng <mawupeng1@huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf evlist: Use the right prefix for 'struct evlist' sample parsing methods mainline inclusion from mainline-v5.11-rc1 commit 2a6599cd5e093b3c607a39288f14a618c03a0e24 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IAU6ZD Reference: https://github.com/torvalds/linux/commit/2a6599cd5e093b3c607a39288f14a618c03a0e24 -------------------------------- commit 2a6599cd5e093b3c607a39288f14a618c03a0e24 upstream perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: PvsNarasimha <PVS.NarasimhaRao@amd.com> | 1 年前 | |
perf list: Remove dead code in argument check The sep is already checked being not NULL. The code seems to be a leftover from some refactoring. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200909055849.469612-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf lock: Don't free "lock_seq_stat" if read_count isn't zero When execute command "perf lock report", it hits failure and outputs log as follows: perf: builtin-lock.c:623: report_lock_release_event: Assertion `!(seq->read_count < 0)' failed. Aborted This is an imbalance issue. The locking sequence structure "lock_seq_stat" contains the reader counter and it is used to check if the locking sequence is balance or not between acquiring and releasing. If the tool wrongly frees "lock_seq_stat" when "read_count" isn't zero, the "read_count" will be reset to zero when allocate a new structure at the next time; thus it causes the wrong counting for reader and finally results in imbalance issue. To fix this issue, if detects "read_count" is not zero (means still have read user in the locking sequence), goto the "end" tag to skip freeing structure "lock_seq_stat". Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201104094229.17509-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf mem: Support AUX trace mainline inclusion from mainline-v5.11-rc1 commit 13e5df1e3f1b category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4NGPV CVE: NA ------------------------------------------------- The 'perf mem' tool doesn't support AUX trace data so it cannot receive the hardware tracing data. On arm64, although it doesn't support PMU events for memory load and store, ARM SPE is a good candidate for memory profiling, the hardware tracer can record memory accessing operations with affiliated information (e.g. physical address and virtual address for accessing, cache levels, TLB walking, latency, etc). To allow "perf mem" tool to support AUX trace, this patch adds the AUX callbacks for session structure; make itrace memory event as default for "perf mem", this tells the AUX trace decoder to synthesize memory samples. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201106094853.21082-8-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Wei Li <liwei391@huawei.com> Reviewed-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf probe: Do not show the skipped events When a probe point is expanded to several places (like inlined) and if some of them are skipped because of blacklisted or __init function, those trace_events has no event name. It must be skipped while showing results. Without this fix, you can see "(null):(null)" on the list, # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: (null):(null) (on request_resource) probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # With this fix, it is ignored: # ./perf probe request_resource reserve_setup is out of .text, skip it. Added new events: probe:request_resource (on request_resource) You can now use it in all perf tools, such as: perf record -e probe:request_resource -aR sleep 1 # Fixes: 5a51fcd1f30c ("perf probe: Skip kernel symbols which is out of .text") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/158763968263.30755.12800484151476026340.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf record: Add support for PERF_SAMPLE_CODE_PAGE_SIZE mainline inclusion from mainline-v5.12-rc1-dontuse commit c1de7f3d84ca324c7cda85c3ce27b11741af2124 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IAU6ZD Reference: https://github.com/torvalds/linux/commit/c1de7f3d84ca324c7cda85c3ce27b11741af2124 -------------------------------- commit c1de7f3d84ca324c7cda85c3ce27b11741af2124 upstream Adds the infrastructure to sample the code address page size. Introduce a new --code-page-size option for perf record. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Originally-by: Stephane Eranian <eranian@google.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210105195752.43489-4-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> (cherry picked from commit c1de7f3d84ca324c7cda85c3ce27b11741af2124) | 1 年前 | |
perf report: Set PERF_SAMPLE_DATA_SRC bit for Arm SPE event stable inclusion from stable-v5.10.113 commit 19590bbc691d81f03d2a24a3ec30c399ebe071e0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5ISAH Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=19590bbc691d81f03d2a24a3ec30c399ebe071e0 -------------------------------- [ Upstream commit ccb17caecfbd542f49a2a79ae088136ba8bfb794 ] Since commit bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") "perf mem report" and "perf report --mem-mode" don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample type. The commit ffab487052054162 ("perf: arm-spe: Fix perf report --mem-mode") partially fixes the issue. It adds PERF_SAMPLE_DATA_SRC bit for Arm SPE event, this allows the perf data file generated by kernel v5.18-rc1 or later version can be reported properly. On the other hand, perf tool still fails to be backward compatibility for a data file recorded by an older version's perf which contains Arm SPE trace data. This patch is a workaround in reporting phase, when detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will force to set the bit in the sample type and give a warning info. Fixes: bb30acae4c4dacfa ("perf report: Bail out --mem-mode if mem info is not available") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Acked-by: Xie XiuQi <xiexiuqi@huawei.com> | 3 年前 | |
perf sched: Cast PTHREAD_STACK_MIN to int as it may turn into sysconf(__SC_THREAD_STACK_MIN_VALUE) mainline inclusion from mainline-v5.14-rc2 commit d08c84e01afa7a7eee6badab25d5420fa847f783 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4Y3D0 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d08c84e01afa7a7eee6badab25d5420fa847f783 ---------------------------- In fedora rawhide the PTHREAD_STACK_MIN define may end up expanded to a sysconf() call, and that will return 'long int', breaking the build: 45 fedora:rawhide : FAIL gcc version 11.1.1 20210623 (Red Hat 11.1.1-6) (GCC) builtin-sched.c: In function 'create_tasks': /git/perf-5.14.0-rc1/tools/include/linux/kernel.h:43:24: error: comparison of distinct pointer types lacks a cast [-Werror] 43 | (void) (&_max1 == &_max2); \ | ^~ builtin-sched.c:673:34: note: in expansion of macro 'max' 673 | (size_t) max(16 * 1024, PTHREAD_STACK_MIN)); | ^~~ cc1: all warnings being treated as errors $ grep __sysconf /usr/include/*/*.h /usr/include/bits/pthread_stack_min-dynamic.h:extern long int __sysconf (int __name) __THROW; /usr/include/bits/pthread_stack_min-dynamic.h:# define PTHREAD_STACK_MIN __sysconf (__SC_THREAD_STACK_MIN_VALUE) /usr/include/bits/time.h:extern long int __sysconf (int); /usr/include/bits/time.h:# define CLK_TCK ((__clock_t) __sysconf (2)) /* 2 is _SC_CLK_TCK */ $ So cast it to int to cope with that. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Reviewed-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 4 年前 | |
perf script: Fix PERF_SAMPLE_WEIGHT_STRUCT support mainline inclusion from mainline-v5.15 commit 27730c8cd60d1574d8337276e7a9d7d2ca92e0d1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAU6ZD Reference: https://github.com/torvalds/linux/commit/27730c8cd60d1574d8337276e7a9d7d2ca92e0d1 -------------------------------- commit 27730c8cd60d1574d8337276e7a9d7d2ca92e0d1 upstream -F weight in perf script is broken. # ./perf mem record # ./perf script -F weight Samples for 'dummy:HG' event do not have WEIGHT attribute set. Cannot print 'weight' field. The sample type, PERF_SAMPLE_WEIGHT_STRUCT, is an alternative of the PERF_SAMPLE_WEIGHT sample type. They share the same space, weight. The lower 32 bits are exactly the same for both sample type. The higher 32 bits may be different for different architecture. For a new kernel on x86, the PERF_SAMPLE_WEIGHT_STRUCT is used. For an old kernel or other ARCHs, the PERF_SAMPLE_WEIGHT is used. With -F weight, current perf script will only check the input string "weight" with the PERF_SAMPLE_WEIGHT sample type. Because the commit ea8d0ed6eae3 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") didn't update the PERF_SAMPLE_WEIGHT_STRUCT sample type for perf script. For a new kernel on x86, the check fails. Use PERF_SAMPLE_WEIGHT_TYPE, which supports both sample types, to replace PERF_SAMPLE_WEIGHT Fixes: ea8d0ed6eae37b01 ("perf tools: Support PERF_SAMPLE_WEIGHT_STRUCT") Reported-by: Joe Mario <jmario@redhat.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Joe Mario <jmario@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Joe Mario <jmario@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/1632929894-102778-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: PvsNarasimha <PVS.NarasimhaRao@amd.com> | 1 年前 | |
perf iostat: Use system-wide mode if the target cpu_list is unspecified mainline inclusion from mainline-v5.15-rc4 commit e4fe5d7349e0b1c0d3da5b6b3e1efce591e85bd2 category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e4fe5d7349e0b1c0d3da5b6b3e1efce591e85bd2 ---------------------------------------------------------------------- An iostate use case like "perf iostat 0000:16,0000:97 -- ls" should be implemented to work in system-wide mode to ensure that the output from print_header() is consistent with the user documentation perf-iostat.txt, rather than incorrectly assuming that the kernel does not support it: Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) \ for event (uncore_iio_0/event=0x83,umask=0x04,ch_mask=0xF,fc_mask=0x07/). /bin/dmesg | grep -i perf may provide additional information. This error is easily fixed by assigning system-wide mode by default for IOSTAT_RUN only when the target cpu_list is unspecified. Fixes: f07952b179697771 ("perf stat: Basic support for iostat in perf") Signed-off-by: Like Xu <likexu@tencent.com> Cc: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210927081115.39568-1-likexu@tencent.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf tools: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Gustavo A. R. Silva <gustavo@embeddedor.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200515172926.GA31976@embeddedor Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf evlist: Use the right prefix for 'struct evlist' sample id lookup methods mainline inclusion from mainline-v5.11-rc1 commit 3ccf8a7b66b6bff69a7be62f2d5a2a61328ebe91 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IAU6ZD Reference: https://github.com/torvalds/linux/commit/3ccf8a7b66b6bff69a7be62f2d5a2a61328ebe91 -------------------------------- commit 3ccf8a7b66b6bff69a7be62f2d5a2a61328ebe91 upstream perf_evlist__ is for 'struct perf_evlist' methods, in tools/lib/perf/, go on completing this split. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: PvsNarasimha <PVS.NarasimhaRao@amd.com> | 1 年前 | |
perf build: Properly guard libbpf includes mainline inclusion from mainline-v6.2-rc4 commit d891f2b724b39a2a41e3ad7b57110193993242ff category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/ICDP8O Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d891f2b724b39a2a41e3ad7b57110193993242ff -------------------------------- Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT. In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL. Fixes: d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h") Reported-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Xiaomeng Zhang <zhangxiaomeng13@huawei.com> | 1 年前 | |
perf tools: Make GTK2 support opt-in This is bitrotting, nobody is stepping up to work on it, and since we treat warnings as errors, feature detection is failing in its main, faster test (tools/build/feature/test-all.c) because of the GTK+2 infobar check. So make this opt-in, at some point ditch this if nobody volunteers to take care of this. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
perf tools: Remove needless util.h include from builtin.h And fix up places where util.h is needed but was obtained indirectly via builtin.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-a01ig3c4t76ye5wkqmtgk9qn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
tools arm64: Import cputype.h mainline inclusion from mainline-v5.18-rc1 commit 1314376d495f2d79cc58753ff3034ccc503c43c9 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=1314376d495f2d79cc58753ff3034ccc503c43c9 ---------------------------------------------------------------------- Bring-in the kernel's arch/arm64/include/asm/cputype.h into tools/ for arm64 to make use of all the core-type definitions in perf. Replace sysreg.h with the version already imported into tools/. Committer notes: Added an entry to tools/perf/check-headers.sh, so that we get notified when the original file in the kernel sources gets modified. Tester notes: LGTM. I did the testing on both my x86 and Arm64 platforms, thanks for the fixing up. Signed-off-by: Ali Saidi <alisaidi@amazon.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Kilroy <andrew.kilroy@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nick.Forrington@arm.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220324183323.31414-2-alisaidi@amazon.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 5 个月前 | |
perf stat: Enable iostat mode for x86 platforms mainline inclusion from mainline-v5.13-rc1 commit f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 ---------------------------------------------------------------------- This functionality is based on recently introduced sysfs attributes for Intel® Xeon® Scalable processor family (code name Skylake-SP): Commit bb42b3d39781d7fc ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping") Mode is intended to provide four I/O performance metrics in MB per each PCIe root port: - Inbound Read: I/O devices below root port read from the host memory - Inbound Write: I/O devices below root port write to the host memory - Outbound Read: CPU reads from I/O devices below root port - Outbound Write: CPU writes to I/O devices below root port Each metric requiries only one uncore event which increments at every 4B transfer in corresponding direction. The formulas to compute metrics are generic: #EventCount * 4B / (1024 * 1024) Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf tools: Support CAP_PERFMON capability Extend error messages to mention CAP_PERFMON capability as an option to substitute CAP_SYS_ADMIN capability for secure system performance monitoring and observability operations. Make perf_event_paranoid_check() and __cmd_ftrace() to be aware of CAP_PERFMON capability. CAP_PERFMON implements the principle of least privilege for performance monitoring and observability operations (POSIX IEEE 1003.1e 2.2.2.39 principle of least privilege: A security design principle that states that a process or program be granted only those privileges (e.g., capabilities) necessary to accomplish its legitimate function, and only for the time that such privileges are actually required) For backward compatibility reasons access to perf_events subsystem remains open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN usage for secure perf_events monitoring is discouraged with respect to CAP_PERFMON capability. Committer testing: Using a libcap with this patch: diff --git a/libcap/include/uapi/linux/capability.h b/libcap/include/uapi/linux/capability.h index 78b2fd4c8a95..89b5b0279b60 100644 --- a/libcap/include/uapi/linux/capability.h +++ b/libcap/include/uapi/linux/capability.h @@ -366,8 +366,9 @@ struct vfs_ns_cap_data { #define CAP_AUDIT_READ 37 +#define CAP_PERFMON 38 -#define CAP_LAST_CAP CAP_AUDIT_READ +#define CAP_LAST_CAP CAP_PERFMON #define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP) Note that using '38' in place of 'cap_perfmon' works to some degree with an old libcap, its only when cap_get_flag() is called that libcap performs an error check based on the maximum value known for capabilities that it will fail. This makes determining the default of perf_event_attr.exclude_kernel to fail, as it can't determine if CAP_PERFMON is in place. Using 'perf top -e cycles' avoids the default check and sets perf_event_attr.exclude_kernel to 1. As root, with a libcap supporting CAP_PERFMON: # groupadd perf_users # adduser perf -g perf_users # mkdir ~perf/bin # cp ~acme/bin/perf ~perf/bin/ # chgrp perf_users ~perf/bin/perf # setcap "cap_perfmon,cap_sys_ptrace,cap_syslog=ep" ~perf/bin/perf # getcap ~perf/bin/perf /home/perf/bin/perf = cap_sys_ptrace,cap_syslog,cap_perfmon+ep # ls -la ~perf/bin/perf -rwxr-xr-x. 1 root perf_users 16968552 Apr 9 13:10 /home/perf/bin/perf As the 'perf' user in the 'perf_users' group: $ perf top -a --stdio Error: Failed to mmap with 1 (Operation not permitted) $ Either add the cap_ipc_lock capability to the perf binary or reduce the ring buffer size to some smaller value: $ perf top -m10 -a --stdio rounding mmap pages size to 64K (16 pages) Error: Failed to mmap with 1 (Operation not permitted) $ perf top -m4 -a --stdio Error: Failed to mmap with 1 (Operation not permitted) $ perf top -m2 -a --stdio PerfTop: 762 irqs/sec kernel:49.7% exact: 100.0% lost: 0/0 drop: 0/0 [4000Hz cycles], (all, 4 CPUs) ------------------------------------------------------------------------------------------------------ 9.83% perf [.] __symbols__insert 8.58% perf [.] rb_next 5.91% [kernel] [k] module_get_kallsym 5.66% [kernel] [k] kallsyms_expand_symbol.constprop.0 3.98% libc-2.29.so [.] __GI_____strtoull_l_internal 3.66% perf [.] rb_insert_color 2.34% [kernel] [k] vsnprintf 2.30% [kernel] [k] string_nocheck 2.16% libc-2.29.so [.] _IO_getdelim 2.15% [kernel] [k] number 2.13% [kernel] [k] format_decode 1.58% libc-2.29.so [.] _IO_feof 1.52% libc-2.29.so [.] __strcmp_avx2 1.50% perf [.] rb_set_parent_color 1.47% libc-2.29.so [.] __libc_calloc 1.24% [kernel] [k] do_syscall_64 1.17% [kernel] [k] __x86_indirect_thunk_rax $ perf record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.552 MB perf.data (74 samples) ] $ perf evlist cycles $ perf evlist -v cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CPU|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 $ perf report | head -20 # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 74 of event 'cycles' # Event count (approx.): 15694834 # # Overhead Command Shared Object Symbol # ........ ............... .......................... ...................................... # 19.62% perf [kernel.vmlinux] [k] strnlen_user 13.88% swapper [kernel.vmlinux] [k] intel_idle 13.83% ksoftirqd/0 [kernel.vmlinux] [k] pfifo_fast_dequeue 13.51% swapper [kernel.vmlinux] [k] kmem_cache_free 6.31% gnome-shell [kernel.vmlinux] [k] kmem_cache_free 5.66% kworker/u8:3+ix [kernel.vmlinux] [k] delay_tsc 4.42% perf [kernel.vmlinux] [k] __set_cpus_allowed_ptr 3.45% kworker/2:1-eve [kernel.vmlinux] [k] shmem_truncate_range 2.29% gnome-shell libgobject-2.0.so.0.6000.7 [.] g_closure_ref $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: intel-gfx@lists.freedesktop.org Cc: linux-doc@vger.kernel.org Cc: linux-man@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: selinux@vger.kernel.org Link: http://lore.kernel.org/lkml/a66d5648-2b8e-577e-e1f2-1d56c017ab5e@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 | |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
perf tools: Fix auto-complete on aarch64 stable inclusion from stable-v5.10.173 commit 93925ab9dd74dc65e1c63b829c0bee8467be29d0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7X0QU Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=93925ab9dd74dc65e1c63b829c0bee8467be29d0 -------------------------------- [ Upstream commit ffd1240e8f0814262ceb957dbe961f6e0aef1e7a ] On aarch64 CPU related events are not under event_source/devices/cpu/events, they're under event_source/devices/armv8_pmuv3_0/events on my machine. Using current auto-complete script will generate below error: [root@localhost bin]# perf stat -e ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory Fix this by not testing /sys/bus/event_source/devices/cpu/events on aarch64 machine. Fixes: 74cd5815d9af6e6c ("perf tool: Improve bash command line auto-complete for multiple events with comma") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Cc: prime.zeng@hisilicon.com Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: sanglipeng <sanglipeng1@jd.com> | 2 年前 | |
perf stat: Enable iostat mode for x86 platforms mainline inclusion from mainline-v5.13-rc1 commit f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8318 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f9ed693e8bc0e7de9eb766a3c7178590e8bb6cd5 ---------------------------------------------------------------------- This functionality is based on recently introduced sysfs attributes for Intel® Xeon® Scalable processor family (code name Skylake-SP): Commit bb42b3d39781d7fc ("perf/x86/intel/uncore: Expose an Uncore unit to IIO PMON mapping") Mode is intended to provide four I/O performance metrics in MB per each PCIe root port: - Inbound Read: I/O devices below root port read from the host memory - Inbound Write: I/O devices below root port write to the host memory - Outbound Read: CPU reads from I/O devices below root port - Outbound Write: CPU writes to I/O devices below root port Each metric requiries only one uncore event which increments at every 4B transfer in corresponding direction. The formulas to compute metrics are generic: #EventCount * 4B / (1024 * 1024) Acked-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey V Bayduraev <alexey.v.bayduraev@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20210419094147.15909-4-alexander.antonov@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: huwentao <huwentao19@h-partners.com> | 4 个月前 | |
perf tools: Make find_vdso_map() more modular In preparation for checking that the vectors page on the ARM architecture, refactor the find_vdso_map() function to accept finding an arbitrary string and create a dedicated helper function for that under util/find-map.c and update the filename to find-map.c and all references to it: perf-read-vdso.c and util/vdso.c. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lkml.kernel.org/r/20181221034337.26663-2-f.fainelli@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 7 年前 | |
perf tests: Call test_attr__open() directly There's no longer need to call test_attr__open() from sys_perf_event_open(), because both 'perf record' and 'perf stat' call evsel__open_cpu(), so we can call it directly from there and not polute the perf-sys.h header. Committer testing: Before and after: # perf test attr 17: Setup struct perf_event_attr : Ok 49: Synthesize attr update : Ok # perf test -v attr 17: Setup struct perf_event_attr : --- start --- test child forked, pid 2170868 running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_ret' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_ret' running '/home/acme/libexec/perf-core/tests/attr/test-record-C0' running '/home/acme/libexec/perf-core/tests/attr/test-record-graph-fp' running '/home/acme/libexec/perf-core/tests/attr/test-record-period' running '/home/acme/libexec/perf-core/tests/attr/test-record-group-sampling' running '/home/acme/libexec/perf-core/tests/attr/test-record-freq' running '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-3' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-k' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-k' running '/home/acme/libexec/perf-core/tests/attr/test-stat-group1' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-u' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-u' running '/home/acme/libexec/perf-core/tests/attr/test-stat-basic' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_call' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any_call' running '/home/acme/libexec/perf-core/tests/attr/test-stat-default' running '/home/acme/libexec/perf-core/tests/attr/test-record-graph-dwarf' running '/home/acme/libexec/perf-core/tests/attr/test-record-no-buffering' running '/home/acme/libexec/perf-core/tests/attr/test-record-raw' running '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-2' running '/home/acme/libexec/perf-core/tests/attr/test-record-count' running '/home/acme/libexec/perf-core/tests/attr/test-record-data' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-any' running '/home/acme/libexec/perf-core/tests/attr/test-stat-group' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-any' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-any' running '/home/acme/libexec/perf-core/tests/attr/test-record-graph-default' running '/home/acme/libexec/perf-core/tests/attr/test-record-no-samples' running '/home/acme/libexec/perf-core/tests/attr/test-stat-C0' running '/home/acme/libexec/perf-core/tests/attr/test-record-no-inherit' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-ind_call' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-ind_call' running '/home/acme/libexec/perf-core/tests/attr/test-record-basic' running '/home/acme/libexec/perf-core/tests/attr/test-record-group1' running '/home/acme/libexec/perf-core/tests/attr/test-record-pfm-period' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-pfm-period' running '/home/acme/libexec/perf-core/tests/attr/test-stat-detailed-1' running '/home/acme/libexec/perf-core/tests/attr/test-stat-no-inherit' running '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-hv' unsupp '/home/acme/libexec/perf-core/tests/attr/test-record-branch-filter-hv' running '/home/acme/libexec/perf-core/tests/attr/test-record-group' test child finished with 0 ---- end ---- Setup struct perf_event_attr: Ok 49: Synthesize attr update : --- start --- test child forked, pid 2171004 test child finished with 0 ---- end ---- Synthesize attr update: Ok # Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200827193201.GB127372@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 5 年前 | |
Merge branch 'x86/cpu' into perf/core, to pick up dependent changes Signed-off-by: Ingo Molnar <mingo@kernel.org> | 6 年前 | |
perf tools: Fix perf's libperf_print callback stable inclusion from stable-v5.10.111 commit 362ced37690d2069dc8f5b556a19599c9fb0686c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5GL1Z Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=362ced37690d2069dc8f5b556a19599c9fb0686c -------------------------------- [ Upstream commit aeee9dc53ce405d2161f9915f553114e94e5b677 ] eprintf() does not expect va_list as the type of the 4th parameter. Use veprintf() because it does. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 428dab813a56ce94 ("libperf: Merge libperf_set_print() into libperf_init()") Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Reviewed-by: Wei Li <liwei391@huawei.com> | 3 年前 | |
perf time-utils: Adopt rdclock() from perf.h Seems to be a better place for this function to live, further shrinking the hodge-podge that perf.h was. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-0zzt1u9rpyjukdy1ccr2u5r9@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> | 6 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 4 个月前 | ||
| 4 个月前 | ||
| 5 个月前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 5 年前 | ||
| 8 个月前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 7 个月前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 4 个月前 | ||
| 4 个月前 | ||
| 7 年前 | ||
| 16 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 8 个月前 | ||
| 4 个月前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 6 年前 | ||
| 1 年前 | ||
| 6 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 1 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 1 年前 | ||
| 4 个月前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 6 年前 | ||
| 5 个月前 | ||
| 4 个月前 | ||
| 6 年前 | ||
| 8 年前 | ||
| 2 年前 | ||
| 4 个月前 | ||
| 7 年前 | ||
| 5 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 6 年前 |