Zzhongxuan2bpftool: Extend net dump with netkit progs
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
bpftool: Add SPDX tags to RST documentation files Most files in the kernel repository have a SPDX tags. The files that don't have such a tag (or another license boilerplate) tend to fall under the GPL-2.0 license. In the past, bpftool's Makefile (for example) has been marked as GPL-2.0 for that reason, when in fact all bpftool is dual-licensed. To prevent a similar confusion from happening with the RST documentation files for bpftool, let's explicitly mark all files as dual-licensed. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-2-quentin@isovalent.com | 4 年前 | |
bpftool: Update doc (use susbtitutions) and test_bpftool_synctypes.py test_bpftool_synctypes.py helps detecting inconsistencies in bpftool between the different list of types and options scattered in the sources, the documentation, and the bash completion. For options that apply to all bpftool commands, the script had a hardcoded list of values, and would use them to check whether the man pages are up-to-date. When writing the script, it felt acceptable to have this list in order to avoid to open and parse bpftool's main.h every time, and because the list of global options in bpftool doesn't change so often. However, this is prone to omissions, and we recently added a new -l|--legacy option which was described in common_options.rst, but not listed in the options summary of each manual page. The script did not complain, because it keeps comparing the hardcoded list to the (now) outdated list in the header file. To address the issue, this commit brings the following changes: - Options that are common to all bpftool commands (--json, --pretty, and --debug) are moved to a dedicated file, and used in the definition of a RST substitution. This substitution is used in the sources of all the man pages. - This list of common options is updated, with the addition of the new -l|--legacy option. - The script test_bpftool_synctypes.py is updated to compare: - Options specific to a command, found in C files, for the interactive help messages, with the same specific options from the relevant man page for that command. - Common options, checked just once: the list in main.h is compared with the new list in substitutions.rst. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com | 4 年前 | |
bpftool: Use libbpf_bpf_attach_type_str This change switches bpftool over to using the recently introduced libbpf_bpf_attach_type_str function instead of maintaining its own string representation for the bpf_attach_type enum. Note that contrary to other enum types, the variant names that bpftool maps bpf_attach_type to do not adhere a simple to follow rule. With bpf_prog_type, for example, the textual representation can easily be inferred by stripping the BPF_PROG_TYPE_ prefix and lowercasing the remaining string. bpf_attach_type violates this rule for various variants. We decided to fix up this deficiency with this change, meaning that bpftool uses the same textual representations as libbpf. Supporting tests, completion scripts, and man pages have been adjusted accordingly. However, we did add support for accepting (the now undocumented) original attach type names when they are provided by users. For the test (test_bpftool_synctypes.py), I have removed the enum representation checks, because we no longer mirror the various enum variant names in bpftool source code. For the man page, help text, and completion script checks we are now using enum definitions from uapi/linux/bpf.h as the source of truth directly. Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220523230428.3077108-10-deso@posteo.net | 4 年前 | |
bpftool: Rename "bpftool feature list" into "... feature list_builtins" To make it more explicit that the features listed with "bpftool feature list" are known to bpftool, but not necessary available on the system (as opposed to the probed features), rename the "feature list" command into "feature list_builtins". Note that "bpftool feature list" still works as before given that we recognise arguments from their prefixes; but the real name of the subcommand, in particular as displayed in the man page or the interactive help, will now include "_builtins". Since we update the bash completion accordingly, let's also take this chance to redirect error output to /dev/null in the completion script, to avoid displaying unexpected error messages when users attempt to tab-complete. Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20220701093805.16920-1-quentin@isovalent.com | 3 年前 | |
bpftool: Add an example for struct_ops map and shadow type. mainline inclusion from mainline-v6.9-rc1 commit f2e81192e07e87897ff1296c96775eceea8f582a category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8335 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f2e81192e07e87897ff1296c96775eceea8f582a ---------------------------------------------------------------------- The example in bpftool-gen.8 explains how to use the pointer of the shadow type to change the value of a field of a struct_ops map. Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20240229064523.2091270-5-thinker.li@gmail.com Signed-off-by: Luo Gengkun <luogengkun2@huawei.com> | 3 个月前 | |
bpftool: Update doc (use susbtitutions) and test_bpftool_synctypes.py test_bpftool_synctypes.py helps detecting inconsistencies in bpftool between the different list of types and options scattered in the sources, the documentation, and the bash completion. For options that apply to all bpftool commands, the script had a hardcoded list of values, and would use them to check whether the man pages are up-to-date. When writing the script, it felt acceptable to have this list in order to avoid to open and parse bpftool's main.h every time, and because the list of global options in bpftool doesn't change so often. However, this is prone to omissions, and we recently added a new -l|--legacy option which was described in common_options.rst, but not listed in the options summary of each manual page. The script did not complain, because it keeps comparing the hardcoded list to the (now) outdated list in the header file. To address the issue, this commit brings the following changes: - Options that are common to all bpftool commands (--json, --pretty, and --debug) are moved to a dedicated file, and used in the definition of a RST substitution. This substitution is used in the sources of all the man pages. - This list of common options is updated, with the addition of the new -l|--legacy option. - The script test_bpftool_synctypes.py is updated to compare: - Options specific to a command, found in C files, for the interactive help messages, with the same specific options from the relevant man page for that command. - Common options, checked just once: the list in main.h is compared with the new list in substitutions.rst. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com | 4 年前 | |
bpftool: Update doc (use susbtitutions) and test_bpftool_synctypes.py test_bpftool_synctypes.py helps detecting inconsistencies in bpftool between the different list of types and options scattered in the sources, the documentation, and the bash completion. For options that apply to all bpftool commands, the script had a hardcoded list of values, and would use them to check whether the man pages are up-to-date. When writing the script, it felt acceptable to have this list in order to avoid to open and parse bpftool's main.h every time, and because the list of global options in bpftool doesn't change so often. However, this is prone to omissions, and we recently added a new -l|--legacy option which was described in common_options.rst, but not listed in the options summary of each manual page. The script did not complain, because it keeps comparing the hardcoded list to the (now) outdated list in the header file. To address the issue, this commit brings the following changes: - Options that are common to all bpftool commands (--json, --pretty, and --debug) are moved to a dedicated file, and used in the definition of a RST substitution. This substitution is used in the sources of all the man pages. - This list of common options is updated, with the addition of the new -l|--legacy option. - The script test_bpftool_synctypes.py is updated to compare: - Options specific to a command, found in C files, for the interactive help messages, with the same specific options from the relevant man page for that command. - Common options, checked just once: the list in main.h is compared with the new list in substitutions.rst. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com | 4 年前 | |
bpftool: Specify XDP Hints ifname when loading program Add ability to specify a network interface used to resolve XDP hints kfuncs when loading program through bpftool. Usage: bpftool prog load [...] xdpmeta_dev <ifname> Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable mistake that results in not very descriptive errors, so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated, followed by 'bpftool map create [...] dev <ifname>' for consistency. Now, to offload program, execute: bpftool prog load [...] offload_dev <ifname> To offload map: bpftool map create [...] offload_dev <ifname> 'dev <ifname>' still performs offloading in the commands above, but now triggers a warning and is excluded from bash completion. 'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because 'xdpmeta_dev' basically makes a program device-bound without loading it onto the said device. For now, offloaded programs cannot use XDP hints [0], but if this changes, using 'offload_dev <ifname>' should cover this case. [0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com | 3 年前 | |
bpftool: Extend net dump with netkit progs stable inclusion from stable-v6.6.131 commit bec981a4add6dd6a63065e54e2b2e67c2af6c3fa category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/9042 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bec981a4add6dd6a63065e54e2b2e67c2af6c3fa -------------------------------- commit bec981a4add6dd6a63065e54e2b2e67c2af6c3fa upstream. Add support to dump BPF programs on netkit via bpftool. This includes both the BPF link and attach ops programs. Dumped information contain the attach location, function entry name, program ID and link ID when applicable. Example with tc BPF link: # ./bpftool net xdp: tc: nk1(22) netkit/peer tc1 prog_id 43 link_id 12 [...] Example with json dump: # ./bpftool net --json | jq [ { "xdp": [], "tc": [ { "devname": "nk1", "ifindex": 18, "kind": "netkit/primary", "name": "tc1", "prog_id": 29, "prog_flags": [], "link_id": 8, "link_flags": [] } ], "flow_dissector": [], "netfilter": [] } ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://lore.kernel.org/r/20231024214904.29825-6-daniel@iogearbox.net Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Xuan Zhong <zhongzuan2@h-partners.com> | 1 个月前 | |
bpftool: Update doc (use susbtitutions) and test_bpftool_synctypes.py test_bpftool_synctypes.py helps detecting inconsistencies in bpftool between the different list of types and options scattered in the sources, the documentation, and the bash completion. For options that apply to all bpftool commands, the script had a hardcoded list of values, and would use them to check whether the man pages are up-to-date. When writing the script, it felt acceptable to have this list in order to avoid to open and parse bpftool's main.h every time, and because the list of global options in bpftool doesn't change so often. However, this is prone to omissions, and we recently added a new -l|--legacy option which was described in common_options.rst, but not listed in the options summary of each manual page. The script did not complain, because it keeps comparing the hardcoded list to the (now) outdated list in the header file. To address the issue, this commit brings the following changes: - Options that are common to all bpftool commands (--json, --pretty, and --debug) are moved to a dedicated file, and used in the definition of a RST substitution. This substitution is used in the sources of all the man pages. - This list of common options is updated, with the addition of the new -l|--legacy option. - The script test_bpftool_synctypes.py is updated to compare: - Options specific to a command, found in C files, for the interactive help messages, with the same specific options from the relevant man page for that command. - Common options, checked just once: the list in main.h is compared with the new list in substitutions.rst. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20211115225844.33943-3-quentin@isovalent.com | 4 年前 | |
bpftool: Specify XDP Hints ifname when loading program Add ability to specify a network interface used to resolve XDP hints kfuncs when loading program through bpftool. Usage: bpftool prog load [...] xdpmeta_dev <ifname> Writing just 'dev <ifname>' instead of 'xdpmeta_dev' is a very probable mistake that results in not very descriptive errors, so 'bpftool prog load [...] dev <ifname>' syntax becomes deprecated, followed by 'bpftool map create [...] dev <ifname>' for consistency. Now, to offload program, execute: bpftool prog load [...] offload_dev <ifname> To offload map: bpftool map create [...] offload_dev <ifname> 'dev <ifname>' still performs offloading in the commands above, but now triggers a warning and is excluded from bash completion. 'xdpmeta_dev' and 'offload_dev' are mutually exclusive options, because 'xdpmeta_dev' basically makes a program device-bound without loading it onto the said device. For now, offloaded programs cannot use XDP hints [0], but if this changes, using 'offload_dev <ifname>' should cover this case. [0] https://lore.kernel.org/bpf/a5a636cc-5b03-686f-4be0-000383b05cfc@linux.dev Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20230517160103.1088185-1-larysa.zaremba@intel.com | 3 年前 | |
bpftool: Update doc to explain struct_ops register subcommand. The "struct_ops register" subcommand now allows for an optional *LINK_DIR* to be included. This specifies the directory path where bpftool will pin struct_ops links with the same name as their corresponding map names. Signed-off-by: Kui-Feng Lee <kuifeng@meta.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20230420002822.345222-2-kuifeng@meta.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> | 3 年前 | |
bpftool: man: Add missing top level docs The top-level (bpftool.8) man page was missing docs for a few subcommands and their respective sub-sub-commands. This commit brings the top level man page up to date. Note that I've kept the ordering of the subcommands the same as in bpftool help. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/3049ef5dc509c0d1832f0a8b2dba2ccaad0af688.1647213551.git.dxu@dxuuu.xyz | 4 年前 | |
bpftool: remove support of --legacy option for bpftool Following: commit bd054102a8c7 ("libbpf: enforce strict libbpf 1.0 behaviors") commit 93b8952d223a ("libbpf: deprecate legacy BPF map definitions") The --legacy option is no longer relevant as libbpf no longer supports it. libbpf_set_strict_mode() is a no-op operation. Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20221120112515.38165-2-sahid.ferdjaoui@industrialdiscipline.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> | 3 年前 | |
bpftool: remove support of --legacy option for bpftool Following: commit bd054102a8c7 ("libbpf: enforce strict libbpf 1.0 behaviors") commit 93b8952d223a ("libbpf: deprecate legacy BPF map definitions") The --legacy option is no longer relevant as libbpf no longer supports it. libbpf_set_strict_mode() is a no-op operation. Signed-off-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@industrialdiscipline.com> Acked-by: Yonghong Song <yhs@fb.com> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/r/20221120112515.38165-2-sahid.ferdjaoui@industrialdiscipline.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> | 3 年前 |