| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
.gitignore: add SPDX License Identifier Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 6 年前 | |
tools: fix cross-compile var clobbering Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 8 年前 | |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
blkcg: add tools/cgroup/iocost_coef_gen.py Add a script which can be used to generate device-specific iocost linear model coefficients. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 6 年前 | |
iocost_monitor: improve it by adding iocg wait_ms The iocg can have three throttled metrics: wait, debt, delay. This patch add missing wait_ms to IocgStat to show the latest wait_ms of iocg. As we are here, group iocg usage percents "inflt%" and "usage%" together, and group iocg throttled metrics "wait", "debt" and "delay" together. Effect after changes: nvme0n1 RUN per=50.0ms cur_per=177105.713:v1053528.587 busy= +0 vrate=135.00%:270.00% params=ssd_dfl(CQ) active weight hweight% inflt% usage% wait debt delay InterfererGroup0 * 100/ 100 54.28/ 9.09 0.34 24.07 0.00 0.00 0.00 interfered * 84/ 1000 45.72/ 90.91 0.48 41.09 0.00 0.00 0.00 Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230804065039.8885-3-chengming.zhou@linux.dev Signed-off-by: Jens Axboe <axboe@kernel.dk> | 2 年前 | |
tools:cgroup:memcg_shrinker remove redundant import Remove redundant import of the sys module. Also use the sort function instead of sorted. It sorts the direct array without create the new one in memory. Link: https://lkml.kernel.org/r/20230108105023.4289-1-apantykhin@gmail.com Signed-off-by: Alexander Pantyukhin <apantykhin@gmail.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
tools/cgroup/slabinfo: update to work with struct slab After the introduction of the dedicated struct slab to describe slab pages by commit d122019bf061 ("mm: Split slab into its own type") and the following removal of the corresponding struct page's fields by commit 07f910f9b729 ("mm: Remove slab from struct page") the memcg_slabinfo tool broke. An attempt to run it produces a trace like this: Traceback (most recent call last): File "/usr/bin/drgn", line 33, in <module> sys.exit(load_entry_point('drgn==0.0.16', 'console_scripts', 'drgn')()) File "/usr/lib64/python3.9/site-packages/drgn/internal/cli.py", line 133, in main runpy.run_path(args.script[0], init_globals=init_globals, run_name="__main__") File "/usr/lib64/python3.9/runpy.py", line 268, in run_path return _run_module_code(code, init_globals, run_name, File "/usr/lib64/python3.9/runpy.py", line 97, in _run_module_code _run_code(code, mod_globals, init_globals, File "/usr/lib64/python3.9/runpy.py", line 87, in _run_code exec(code, run_globals) File "memcg_slabinfo.py", line 226, in <module> main() File "memcg_slabinfo.py", line 199, in main cache = page.slab_cache AttributeError: 'struct page' has no member 'slab_cache' The problem can be fixed by explicitly casting struct page * to struct slab * for slab pages. The tools works as expected with this fix, e.g.: cred_jar 776 776 192 21 1 : tunables 0 0 0 : slabdata 547 547 0 kmalloc-cg-32 6 6 32 128 1 : tunables 0 0 0 : slabdata 9 9 0 files_cache 3 3 832 39 8 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-cg-512 1 1 512 32 4 : tunables 0 0 0 : slabdata 10 10 0 task_struct 10 10 6720 4 8 : tunables 0 0 0 : slabdata 63 63 0 mm_struct 3 3 1664 19 8 : tunables 0 0 0 : slabdata 9 9 0 kmalloc-cg-16 1 1 16 256 1 : tunables 0 0 0 : slabdata 8 8 0 pde_opener 1 1 40 102 1 : tunables 0 0 0 : slabdata 8 8 0 anon_vma_chain 375 375 64 64 1 : tunables 0 0 0 : slabdata 81 81 0 radix_tree_node 3 3 584 28 4 : tunables 0 0 0 : slabdata 419 419 0 dentry 98 98 312 26 2 : tunables 0 0 0 : slabdata 1420 1420 0 btrfs_inode 3 3 2368 13 8 : tunables 0 0 0 : slabdata 730 730 0 signal_cache 3 3 1600 20 8 : tunables 0 0 0 : slabdata 17 17 0 sighand_cache 3 3 2240 14 8 : tunables 0 0 0 : slabdata 20 20 0 filp 90 90 512 32 4 : tunables 0 0 0 : slabdata 95 95 0 anon_vma 214 214 200 20 1 : tunables 0 0 0 : slabdata 162 162 0 kmalloc-cg-1k 1 1 1024 32 8 : tunables 0 0 0 : slabdata 22 22 0 pid 10 10 256 32 2 : tunables 0 0 0 : slabdata 14 14 0 kmalloc-cg-64 2 2 64 64 1 : tunables 0 0 0 : slabdata 8 8 0 kmalloc-cg-96 3 3 96 42 1 : tunables 0 0 0 : slabdata 8 8 0 sock_inode_cache 5 5 1408 23 8 : tunables 0 0 0 : slabdata 29 29 0 UNIX 7 7 1920 17 8 : tunables 0 0 0 : slabdata 21 21 0 inode_cache 36 36 1152 28 8 : tunables 0 0 0 : slabdata 680 680 0 proc_inode_cache 26 26 1224 26 8 : tunables 0 0 0 : slabdata 64 64 0 kmalloc-cg-2k 2 2 2048 16 8 : tunables 0 0 0 : slabdata 9 9 0 v2: change naming and count_partial()/count_free()/for_each_slab() signatures to work with slabs, suggested by Matthew Wilcox Fixes: 07f910f9b729 ("mm: Remove slab from struct page") Reported-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Roman Gushchin <guro@fb.com> Tested-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/linux-patches/Yg2cKKnIboNu7j+p@carbon.DHCP.thefacebook.com/ | 4 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 6 年前 | ||
| 8 年前 | ||
| 8 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 4 年前 |