# -*-makefile-*-
# src/Makefile.global.in
#------------------------------------------------------------------------------
# All PostgreSQL makefiles include this file and use the variables it sets,
# which in turn are put here by the configure script. There is no need for
# users to edit this file -- if it turns out to be necessary then that's a
# bug.
#
# A makefile that includes this file needs to set the variable `subdir' to
# the relative path from the top to itself and `top_builddir' to the relative
# path from itself to the top before including this file. (The "top" is the
# parent directory of the directory this file is in.)
#------------------------------------------------------------------------------
##########################################################################
#
# Meta configuration
standard_targets = all install installdirs uninstall distprep clean distclean maintainer-clean coverage check installcheck maintainer-check 2pccheck init-po update-po
# these targets should recurse even into subdirectories not being built:
standard_always_targets = distprep clean distclean maintainer-clean
.PHONY: $(standard_targets) install-strip html man installcheck-parallel
# make `all' the default target
all:
# Delete target files if the command fails after it has
# started to update the file.
.DELETE_ON_ERROR:
# PostgreSQL version number
VERSION = @PACKAGE_VERSION@
MAJORVERSION = @PG_MAJORVERSION@
# Support for VPATH builds
vpath_build = @vpath_build@
abs_top_srcdir = @abs_top_srcdir@
CC_VERSION = @CC_VERSION@
SUB_CC_VERSION = @SUB_CC_VERSION@
ifneq ($(vpath_build),yes)
top_srcdir = $(top_builddir)
srcdir = .
else # vpath_build = yes
top_srcdir = $(abs_top_srcdir)
srcdir = $(top_srcdir)/$(subdir)
VPATH = $(srcdir)
endif
vpathsearch = `for f in $(addsuffix /$(1),$(subst :, ,. $(VPATH))); do test -r $$f && echo $$f && break; done`
# Saved arguments from configure
configure_args = @configure_args@
##########################################################################
#
# Installation directories
#
# These are set by the equivalent --xxxdir configure options. We
# append "postgresql" to some of them, if the string does not already
# contain "pgsql" or "postgres", in order to avoid directory clutter.
#
# In a PGXS build, we cannot use the values inserted into Makefile.global
# by configure, since the installation tree may have been relocated.
# Instead get the path values from pg_config.
ifndef PGXS
# Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
# makefiles may only use the derived variables such as bindir.
prefix := @prefix@
exec_prefix := @exec_prefix@
datarootdir := @datarootdir@
bindir := @bindir@
llvmirdir := @llvmirdir@
datadir := @datadir@
ifeq "$(findstring pgsql, $(datadir))" ""
ifeq "$(findstring postgres, $(datadir))" ""
override datadir := $(datadir)/postgresql
endif
endif
sysconfdir := @sysconfdir@
ifeq "$(findstring pgsql, $(sysconfdir))" ""
ifeq "$(findstring postgres, $(sysconfdir))" ""
override sysconfdir := $(sysconfdir)/postgresql
endif
endif
libdir := @libdir@
pkglibdir = $(libdir)
ifeq "$(findstring pgsql, $(pkglibdir))" ""
ifeq "$(findstring postgres, $(pkglibdir))" ""
override pkglibdir := $(pkglibdir)/postgresql
endif
endif
includedir := @includedir@
pkgincludedir = $(includedir)
ifeq "$(findstring pgsql, $(pkgincludedir))" ""
ifeq "$(findstring postgres, $(pkgincludedir))" ""
override pkgincludedir := $(pkgincludedir)/postgresql
endif
endif
mandir := @mandir@
docdir := @docdir@
ifeq "$(findstring pgsql, $(docdir))" ""
ifeq "$(findstring postgres, $(docdir))" ""
override docdir := $(docdir)/postgresql
endif
endif
htmldir := @htmldir@
localedir := @localedir@
else # PGXS case
# Extension makefiles should set PG_CONFIG, but older ones might not
ifndef PG_CONFIG
PG_CONFIG = pg_config
endif
bindir := $(shell $(PG_CONFIG) --bindir)
datadir := $(shell $(PG_CONFIG) --sharedir)
sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
libdir := $(shell $(PG_CONFIG) --libdir)
pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
includedir := $(shell $(PG_CONFIG) --includedir)
pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
mandir := $(shell $(PG_CONFIG) --mandir)
docdir := $(shell $(PG_CONFIG) --docdir)
localedir := $(shell $(PG_CONFIG) --localedir)
endif # PGXS
# These derived path variables aren't separately configurable.
#
includedir_server = $(pkgincludedir)/server
includedir_internal = $(pkgincludedir)/internal
pgxsdir = $(pkglibdir)/pgxs
##########################################################################
#
# Features
#
# Records the choice of the various --enable-xxx and --with-xxx options.
##########################################################################
with_python = @with_python@
with_openssl = @with_openssl@
with_ossp_uuid = @with_ossp_uuid@
with_selinux = @with_selinux@
with_libxml = @with_libxml@
with_libxslt = @with_libxslt@
with_system_tzdata = @with_system_tzdata@
with_zlib = @with_zlib@
enable_shared = @enable_shared@
enable_rpath = @enable_rpath@
enable_cassert = @enable_cassert@
enable_jemalloc = @enable_jemalloc@
enable_jemalloc_debug = @enable_jemalloc_debug@
enable_privategauss = @enable_privategauss@
enable_multiple_nodes = @enable_multiple_nodes@
enable_lite_mode = @enable_lite_mode@
enable_relocation = @enable_relocation@
enable_finance_mode = @enable_finance_mode@
enable_mot = @enable_mot@
enable_x86_rdtscp = @enable_x86_rdtscp@
enable_bbox = @enable_bbox@
enable_llvm = @enable_llvm@
enable_mysql_fdw = @enable_mysql_fdw@
enable_oracle_fdw = @enable_oracle_fdw@
enable_memory_check = @enable_memory_check@
enable_memory_check_core = @enable_memory_check_core@
enable_thread_check = @enable_thread_check@
enable_nls = @enable_nls@
enable_debug = @enable_debug@
enable_dtrace = @enable_dtrace@
enable_coverage = @enable_coverage@
enable_thread_safety = @enable_thread_safety@
enable_llt = @enable_llt@
enable_ut = @enable_ut@
enable_qunit = @enable_qunit@
enable_gstrace = @enable_gstrace@
enable_libnet = @enable_libnet@
enable_htap = @enable_htap@
python_includespec = @python_includespec@
python_libdir = @python_libdir@
python_libspec = @python_libspec@
python_additional_libs = @python_additional_libs@
python_configdir = @python_configdir@
python_majorversion = @python_majorversion@
python_version = @python_version@
krb_srvtab = @krb_srvtab@
TCLSH = @TCLSH@
TCL_LIB_FILE = @TCL_LIB_FILE@
TCL_LIBS = @TCL_LIBS@
TCL_LIB_SPEC = @TCL_LIB_SPEC@
TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
TCL_SHARED_BUILD = @TCL_SHARED_BUILD@
TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
with_openeuler_os = @with_openeuler_os@
with_openeuler_major = @with_openeuler_major@
with_obs = @with_obs@
with_openssl3 = @with_openssl3@
#############################################################################
#############################################################################
#############################################################################
# #
# set globle paremeters about all depend libs #
# including: #
# jemalloc #
# event, libcgroup, kerberos, libxml #
# libedit, zlib1.2.11, boost, openssl #
# if a new lib will be used, please add it here #
#############################################################################
#############################################################################
#############################################################################
#############################################################################
SUPPORT_HOTPATCH = @SUPPORT_HOTPATCH@
ifneq ($(enable_multiple_nodes)_$(enable_privategauss), no_no)
ifeq ($(CC_VERSION), 7.3.0)
SUPPORT_HOTPATCH = yes
else
SUPPORT_HOTPATCH = no
endif
else
SUPPORT_HOTPATCH = no
endif
ifeq ($(enable_lite_mode), yes)
SUPPORT_HOTPATCH = no
endif
#############################################################################
#############################################################################
# I leave all this home path here because somewhere will it, e. llvm-config #
# set globle paremeters about all depend libs's home path #
# including: #
# jemalloc #
# event, libcgroup, kerberos, libxml #
# libedit, zlib1.2.11, boost, openssl #
# if a new lib will be used, please add it here #
#############################################################################
#############################################################################
# Saved arguments form configure
with_3rd = @with_3rdpartydir@
with_jdk = @with_jdk@
with_tassl = @with_tassl@
ifeq ($(with_3rd), NONE)
BINARYPATH = binarylibs/kernel/dependency
PLATFORMPATH = binarylibs/kernel/platform
BUILD_TOOLS_PATH = binarylibs/buildtools
INSTALL_TOOLS_PATH = binarylibs/install_tools
COMPONENTPATH = binarylibs/component
JEMALLOC_HOME = $(top_builddir)/$(BINARYPATH)/jemalloc/$(JEMALLOC_BUILD_TYPE)
MEMCHECK_HOME = $(top_builddir)/$(BINARYPATH)/memcheck/$(MEMCHECK_BUILD_TYPE)
LIBOBS_HOME = $(top_builddir)/$(BINARYPATH)/libobs/$(LIB_NOT_SUPPORT_LLT)
LIBODBC_HOME = $(top_builddir)/$(BINARYPATH)/unixodbc
LIBXML_HOME = $(top_builddir)/$(BINARYPATH)/libxml2/$(LIB_SUPPORT_LLT)
LIBHOTPATCH_HOME = $(top_builddir)/$(PLATFORMPATH)/hotpatch
LIBCGROUP_HOME = $(top_builddir)/$(BINARYPATH)/libcgroup/$(LIB_SUPPORT_LLT)
LIBLLVM_HOME = $(top_builddir)/$(BINARYPATH)/llvm/comm
XGBOOST_HOME = $(top_builddir)/$(BINARYPATH)/xgboost/comm
EVENT_HOME = $(top_builddir)/$(BINARYPATH)/event/$(LIB_SUPPORT_LLT)
ZLIB_HOME = $(top_builddir)/$(BINARYPATH)/zlib1.2.11/$(LIB_SUPPORT_LLT)
LZ4_HOME = $(top_builddir)/$(BINARYPATH)/lz4/$(LIB_SUPPORT_LLT)
CJSON_HOME = $(top_builddir)/$(BINARYPATH)/cjson/$(LIB_SUPPORT_LLT)
KERBEROS_HOME = $(top_builddir)/$(BINARYPATH)/kerberos/$(LIB_SUPPORT_LLT)
BOOST_HOME = $(top_builddir)/$(BINARYPATH)/boost/$(LIB_SUPPORT_LLT)
ifeq ($(with_tassl), yes)
LIBOPENSSL_HOME = $(top_builddir)/$(BINARYPATH)/tassl/$(LIB_NOT_SUPPORT_LLT)
else
LIBOPENSSL_HOME = $(top_builddir)/$(BINARYPATH)/openssl/$(LIB_NOT_SUPPORT_LLT)
endif
SECURE_HOME = $(top_builddir)/$(PLATFORMPATH)/Huawei_Secure_C/$(LIB_NOT_SUPPORT_LLT)
SECUREDYNAMICLIB_HOME = $(top_builddir)/$(PLATFORMPATH)/Huawei_Secure_C/Dynamic_Lib
LICENSE_HOME = $(top_builddir)/$(PLATFORMPATH)/AdaptiveLM_C_V100R005C01SPC002/$(LIB_SUPPORT_LLT)
LIBSTD_HOME = $(top_builddir)/$(BUILD_TOOLS_PATH)/libstd/gcc$(CC_VERSION)/$(LIB_NOT_SUPPORT_LLT)
GTEST_HOME = $(top_builddir)/$(BUILD_TOOLS_PATH)/gtest/$(LIB_NOT_SUPPORT_LLT)
MOCKCPP_HOME = $(top_builddir)/$(BUILD_TOOLS_PATH)/mockcpp/$(LIB_NOT_SUPPORT_LLT)
NUMA_HOME = $(top_builddir)/$(BINARYPATH)/numactl/$(LIB_SUPPORT_LLT)
LIBCURL_HOME = $(top_builddir)/$(BINARYPATH)/libcurl/$(LIB_SUPPORT_LLT)
AWSSDK_HOME = $(top_builddir)/$(BINARYPATH)/aws-sdk-cpp/$(LIB_SUPPORT_LLT)
ZSTD_HOME = $(top_builddir)/$(BINARYPATH)/zstd
LIBNANOMSG_HOME = $(top_builddir)/$(BINARYPATH)/nng/comm
PLJAVA_HOME = $(top_builddir)/$(BINARYPATH)/pljava/$(LIB_SUPPORT_LLT)
MASSTREE_HOME = $(top_builddir)/$(BINARYPATH)/masstree/comm
MYFDW_HOME = $(top_builddir)/dependency/mysql_fdw
ORCFDW_HOME = $(top_builddir)/dependency/oracle_fdw
DCF_HOME = $(top_builddir)/$(COMPONENTPATH)/dcf
DSS_HOME = $(top_builddir)/$(COMPONENTPATH)/dss
DMS_HOME = $(top_builddir)/$(COMPONENTPATH)/dms
HCOM4DB_HOME = $(top_builddir)/$(COMPONENTPATH)/hcom4db
else
BINARYPATH = kernel/dependency
PLATFORMPATH = kernel/platform
BUILD_TOOLS_PATH = buildtools
JEMALLOC_HOME = $(with_3rd)/$(BINARYPATH)/jemalloc/$(JEMALLOC_BUILD_TYPE)
MEMCHECK_HOME = $(with_3rd)/$(BINARYPATH)/memcheck/$(MEMCHECK_BUILD_TYPE)
LIBOBS_HOME = $(with_3rd)/$(BINARYPATH)/libobs/$(LIB_NOT_SUPPORT_LLT)
LIBODBC_HOME = $(with_3rd)/$(BINARYPATH)/unixodbc
LIBXML_HOME = $(with_3rd)/$(BINARYPATH)/libxml2/$(LIB_SUPPORT_LLT)
LIBCGROUP_HOME = $(with_3rd)/$(BINARYPATH)/libcgroup/$(LIB_SUPPORT_LLT)
LIBHOTPATCH_HOME = $(with_3rd)/$(PLATFORMPATH)/hotpatch
LIBLLVM_HOME = $(with_3rd)/$(BINARYPATH)/llvm/comm
XGBOOST_HOME = $(with_3rd)/$(BINARYPATH)/xgboost/$(LIB_SUPPORT_LLT)
EVENT_HOME = $(with_3rd)/$(BINARYPATH)/event/$(LIB_SUPPORT_LLT)
ZLIB_HOME = $(with_3rd)/$(BINARYPATH)/zlib1.2.11/$(LIB_SUPPORT_LLT)
LZ4_HOME = $(with_3rd)/$(BINARYPATH)/lz4/$(LIB_SUPPORT_LLT)
CJSON_HOME = $(with_3rd)/$(BINARYPATH)/cjson/$(LIB_SUPPORT_LLT)
KERBEROS_HOME = $(with_3rd)/$(BINARYPATH)/kerberos/$(LIB_SUPPORT_LLT)
BOOST_HOME = $(with_3rd)/$(BINARYPATH)/boost/$(LIB_SUPPORT_LLT)
ifeq ($(with_tassl), yes)
LIBOPENSSL_HOME = $(with_3rd)/$(BINARYPATH)/tassl/$(LIB_NOT_SUPPORT_LLT)
else
LIBOPENSSL_HOME = $(with_3rd)/$(BINARYPATH)/openssl/$(LIB_NOT_SUPPORT_LLT)
endif
ifneq ($(enable_lite_mode), yes)
ifneq ($(enable_multiple_nodes)_$(enable_privategauss), no_no)
LIBKMC_HOME = $(with_3rd)/$(PLATFORMPATH)/kmc/comm
endif
endif
SECURE_HOME = $(with_3rd)/$(PLATFORMPATH)/Huawei_Secure_C/$(LIB_NOT_SUPPORT_LLT)
SECUREDYNAMICLIB_HOME = $(with_3rd)/$(PLATFORMPATH)/Huawei_Secure_C/Dynamic_Lib
LICENSE_HOME = $(with_3rd)/$(PLATFORMPATH)/AdaptiveLM_C_V100R005C01SPC002/$(LIB_SUPPORT_LLT)
LIBSTD_HOME = $(with_3rd)/$(BUILD_TOOLS_PATH)/libstd/gcc$(CC_VERSION)/$(LIB_NOT_SUPPORT_LLT)
GTEST_HOME = $(with_3rd)/$(BUILD_TOOLS_PATH)/gtest/$(LIB_NOT_SUPPORT_LLT)
MOCKCPP_HOME = $(with_3rd)/$(BUILD_TOOLS_PATH)/mockcpp/$(LIB_NOT_SUPPORT_LLT)
NUMA_HOME = $(with_3rd)/$(BINARYPATH)/numactl/$(LIB_SUPPORT_LLT)
LIBCURL_HOME = $(with_3rd)/$(BINARYPATH)/libcurl/$(LIB_SUPPORT_LLT)
AWSSDK_HOME = $(with_3rd)/$(BINARYPATH)/aws-sdk-cpp/$(LIB_SUPPORT_LLT)
ZSTD_HOME = $(with_3rd)/$(BINARYPATH)/zstd
LIBNANOMSG_HOME = $(with_3rd)/$(BINARYPATH)/nng/comm
PLJAVA_HOME = $(with_3rd)/$(BINARYPATH)/pljava/$(LIB_SUPPORT_LLT)
using_openjdk = $(shell if [ -d "$(with_3rd)/$(PLATFORMPATH)/openjdk8" ]; then echo "yes"; else echo "no"; fi;)
ifeq ($(using_openjdk), yes)
JAVA_HOME = $(with_3rd)/${PLATFORMPATH}/openjdk8/$(shell uname -p)/jdk
else
JAVA_HOME = $(with_3rd)/${PLATFORMPATH}/huaweijdk8/$(shell uname -p)/jdk
endif
MASSTREE_HOME = $(with_3rd)/$(BINARYPATH)/masstree/comm
MYFDW_HOME = $(with_3rd)/$(BINARYPATH)/mysql_fdw
ORCFDW_HOME = $(with_3rd)/$(BINARYPATH)/oracle_fdw
DCF_HOME = $(with_3rd)/kernel/component/dcf
DSS_HOME = $(with_3rd)/kernel/component/dss
DMS_HOME = $(with_3rd)/kernel/component/dms
HCOM4DB_HOME = $(with_3rd)/kernel/component/hcom4db
endif
ifeq ($(with_openeuler_os), yes)
JAVA_HOME = /usr/lib/jvm/java/
ZLIB_HOME = $(with_3rd)/zlib/
CJSON_HOME = $(with_3rd)/cjson/
endif
##############################################################################
# jemalloc component
##############################################################################
JEMALLOC_BUILD_TYPE =
JEMALLOC_LIB_NAME =
ifeq ($(enable_jemalloc_debug), yes)
ifeq ($(enable_llt), yes)
JEMALLOC_BUILD_TYPE = debug_ll
JEMALLOC_LIB_NAME = jemalloc_pic
else
ifeq ($(enable_ut), yes)
JEMALLOC_BUILD_TYPE = debug_ll
JEMALLOC_LIB_NAME = jemalloc_pic
else
JEMALLOC_BUILD_TYPE = debug
JEMALLOC_LIB_NAME = jemalloc
endif
endif
else
ifeq ($(enable_cassert), yes)
ifeq ($(enable_llt), yes)
JEMALLOC_BUILD_TYPE = debug_llt
JEMALLOC_LIB_NAME = jemalloc_pic
else
ifeq ($(enable_ut), yes)
JEMALLOC_BUILD_TYPE = debug_llt
JEMALLOC_LIB_NAME = jemalloc_pic
else
JEMALLOC_BUILD_TYPE = debug
JEMALLOC_LIB_NAME = jemalloc
endif
endif
else
ifeq ($(enable_jemalloc), yes)
ifeq ($(enable_llt), yes)
JEMALLOC_BUILD_TYPE = release_llt
JEMALLOC_LIB_NAME = jemalloc_pic
else
ifeq ($(enable_ut), yes)
JEMALLOC_BUILD_TYPE = release_llt
JEMALLOC_LIB_NAME = jemalloc_pic
else
JEMALLOC_BUILD_TYPE = release
JEMALLOC_LIB_NAME = jemalloc
endif
endif
endif
endif
endif
JEMALLOC_INCLUDE_PATH = $(JEMALLOC_HOME)/include
JEMALLOC_LIB_PATH = $(JEMALLOC_HOME)/lib
##############################################################################
# secure_c bound check component
##############################################################################
ifeq ($(with_openeuler_os), yes)
SECURE_C_CHECK = boundscheck
else
SECURE_C_CHECK = securec
endif
##############################################################################
# memory and thread checking component
##############################################################################
MEMCHECK_BUILD_TYPE =
MEMCHECK_LIB_NAME =
MEMCHECK_BUILD_TYPE = debug
ifeq ($(enable_memory_check), yes)
MEMCHECK_LIB_NAME_ASAN = asan
MEMCHECK_LIB_NAME_UBSAN = ubsan
else
ifeq ($(enable_thread_check), yes)
MEMCHECK_LIB_NAME_TSAN = tsan
endif
endif
MEMCHECK_LIB_PATH = $(MEMCHECK_HOME)/gcc$(CC_VERSION)/lib/
#############################################################################
# get the depend lib path
# 1. libedit, event, libcgroup, kerberos, zlib1.2.11, boost,
# libxml are support parameter --enable-llt and --enable-ut;
# $(LIB_SUPPORT_LLT)
# 2. Huawei_Secure_C, gtest, mockcpp, unixodbc, libstd
# and openssl not support parameter --enable-llt and --enable-ut;
# $(LIB_NOT_SUPPORT_LLT)
#############################################################################
LIB_SUPPORT_LLT=
ifeq ($(enable_llt), yes)
LIB_SUPPORT_LLT = llt
else
ifeq ($(enable_ut), yes)
LIB_SUPPORT_LLT = llt
else
LIB_SUPPORT_LLT = comm
endif
endif
LIB_NOT_SUPPORT_LLT = comm
#############################################################################
# obs component
#############################################################################
LIBOBS_INCLUDE_PATH = $(LIBOBS_HOME)/include
LIBOBS_LIB_PATH = $(LIBOBS_HOME)/lib
#############################################################################
# libodbc component
#############################################################################
LIBODBC_INCLUDE_PATH = $(LIBODBC_HOME)/include
LIBODBC_LIB_PATH = $(LIBODBC_HOME)/lib
#############################################################################
# libcgroup component
#############################################################################
LIBCGROUP_INCLUDE_PATH = $(LIBCGROUP_HOME)/include
LIBCGROUP_LIB_PATH = $(LIBCGROUP_HOME)/lib
#############################################################################
# libhotpatch component
#############################################################################
LIBHOTPATCH_INCLUDE_PATH = $(LIBHOTPATCH_HOME)/include
LIBHOTPATCH_LIB_PATH = $(LIBHOTPATCH_HOME)/lib
LIBHOTPATCH_TOOL_PATH = $(LIBHOTPATCH_HOME)/tool
#############################################################################
# llvm component
#############################################################################
ifeq ($(enable_llvm), yes)
LIBLLVM_BIN = $(LIBLLVM_HOME)/bin
LIBLLVM_INCLUDE_PATH = $(LIBLLVM_HOME)/include
LIBLLVM_LIB_PATH = $(LIBLLVM_HOME)/lib
LLVM_CONFIG = $(LIBLLVM_BIN)/llvm-config
ifneq ($(enable_lite_mode), yes)
LLVM_LIBS = $(shell $(LLVM_CONFIG) --libs)
endif
else
LIBLLVM_INCLUDE_PATH = /usr/include
LIBLLVM_LIB_PATH = /usr/lib
LLVM_LIBS =
endif
#############################################################################
# xgboost component
#############################################################################
XGBOOST_INCLUDE_PATH = $(XGBOOST_HOME)/include
XGBOOST_LIB_PATH = $(XGBOOST_HOME)/lib64
#############################################################################
# event component
#############################################################################
EVENT_INCLUDE_PATH = $(EVENT_HOME)/include
EVENT_LIB_PATH = $(EVENT_HOME)/lib
EVENT_LIB_NAME =
ifeq ($(enable_llt), yes)
EVENT_LIB_NAME = event_pic
else
ifeq ($(enable_ut), yes)
EVENT_LIB_NAME = event_pic
else
EVENT_LIB_NAME = event
endif
endif
#############################################################################
# zlib component
#############################################################################
ZLIB_INCLUDE_PATH = $(ZLIB_HOME)/include
ZLIB_LIB_PATH = $(ZLIB_HOME)/lib
#############################################################################
#############################################################################
# lz4 component
#############################################################################
LZ4_INCLUDE_PATH = $(LZ4_HOME)/include
LZ4_LIB_PATH = $(LZ4_HOME)/lib
LZ4_BIN_PATH = $(LZ4_HOME)/bin
#############################################################################
# cjson component
#############################################################################
CJSON_INCLUDE_PATH = $(CJSON_HOME)/include
CJSON_LIB_PATH = $(CJSON_HOME)/lib
#############################################################################
# kerberos component
#############################################################################
KERBEROS_BIN_PATH = $(KERBEROS_HOME)/bin
KERBEROS_SBIN_PATH = $(KERBEROS_HOME)/sbin
KERBEROS_INCLUDE_PATH = $(KERBEROS_HOME)/include
KERBEROS_LIB_PATH = $(KERBEROS_HOME)/lib
#############################################################################
# boost component
#############################################################################
BOOST_INCLUDE_PATH = $(BOOST_HOME)/include
BOOST_LIB_PATH = $(BOOST_HOME)/lib
#############################################################################
# libxml component
#############################################################################
LIBXML_INCLUDE_PATH = $(LIBXML_HOME)/include
LIBXML_LIB_PATH = $(LIBXML_HOME)/lib
#############################################################################
# openssl component
#############################################################################
LIBOPENSSL_BIN_PATH = $(LIBOPENSSL_HOME)/bin
LIBOPENSSL_LIB_PATH = $(LIBOPENSSL_HOME)/lib
LIBOPENSSL_SSL_PATH = $(LIBOPENSSL_HOME)/ssl
LIBOPENSSL_INCLUDE_PATH = $(LIBOPENSSL_HOME)/include
ifneq ($(enable_lite_mode), yes)
ifneq ($(enable_multiple_nodes)_$(enable_privategauss), no_no)
#############################################################################
# kmc component
#############################################################################
LIBKMC_LIB_PATH = $(LIBKMC_HOME)/lib
LIBKMC_INCLUDE_PATH = $(LIBKMC_HOME)/include
endif
endif
#############################################################################
# security component
#############################################################################
SECURE_INCLUDE_PATH = $(SECURE_HOME)/include
SECURE_LIB_PATH = $(SECURE_HOME)/lib
#############################################################################
# license manager compnent
#############################################################################
LICENSE_INCLUDE_PATH = $(LICENSE_HOME)/include
LICENSE_LIB_PATH = $(LICENSE_HOME)/lib
#############################################################################
# libstd component
#############################################################################
LIBSTD_LIB_PATH = $(LIBSTD_HOME)/lib
############################################################################
# gtest component
############################################################################
GTEST_INCLUDE_PATH = $(GTEST_HOME)/include
GTEST_LIB_PATH = $(GTEST_HOME)/lib
############################################################################
# mockcpp component
############################################################################
MPCKCPP_LIB_PATH = $(MOCKCPP_HOME)/lib
#############################################################################
# zstd component
#############################################################################
ZSTD_INCLUDE_PATH = $(ZSTD_HOME)/include
ZSTD_LIB_PATH = $(ZSTD_HOME)/lib
#############################################################################
# gstrace component
#############################################################################
GSTRACE_HOME = $(top_builddir)/src/gstrace/
GSTRACE_LIB_PATH = $(GSTRACE_HOME)/common
#############################################################################
# libnuma component
#############################################################################
NUMA_INCLUDE_PATH = $(NUMA_HOME)/include
NUMA_LIB_PATH = $(NUMA_HOME)/lib
#############################################################################
# curl component
#############################################################################
LIBCURL_INCLUDE_PATH = $(LIBCURL_HOME)/include
LIBCURL_LIB_PATH = $(LIBCURL_HOME)/lib
#############################################################################
# awssdk component
#############################################################################
AWSSDK_INCLUDE_PATH = $(AWSSDK_HOME)/include
AWSSDK_LIB_PATH = $(AWSSDK_HOME)/lib
#############################################################################
# masstree component
#############################################################################
MASSTREE_INCLUDE_PATH = $(MASSTREE_HOME)/include
MASSTREE_LIB_PATH = $(MASSTREE_HOME)/lib
#############################################################################
# dcf component
#############################################################################
DCF_INCLUDE_PATH = $(DCF_HOME)/include
DCF_LIB_PATH = $(DCF_HOME)/lib
#############################################################################
# dss component
#############################################################################
DSS_BIN_PATH = $(DSS_HOME)/bin
DSS_LIB_PATH = $(DSS_HOME)/lib
#############################################################################
# dms component
#############################################################################
DMS_LIB_PATH = $(DMS_HOME)/lib
#############################################################################
# hcom4db component
#############################################################################
HCOM4DB_LIB_PATH = $(HCOM4DB_HOME)/lib
############################################################################
#
# Programs and flags
#
############################################################################
# Compilers
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
#CPPFLAGS = @CPPFLAGS@ -DHAVE_LIBREADLINE=1 -DHAVE_READLINE_READLINE_H=1 -DHAVE_READLINE_HISTORY_H=1 -DHAVE_RL_COMPLETION_APPEND_CHARACTER=1 -DHAVE_RL_COMPLETION_MATCHES=1 -DHAVE_RL_FILENAME_COMPLETION_FUNCTION=1 -DHAVE_HISTORY_TRUNCATE_FILE=1
ifeq ($(enable_llt), yes)
CPPFLAGS = @CPPFLAGS@ -DHAVE_LIBREADLINE=1 -DHAVE_READLINE_READLINE_H=1 -DHAVE_READLINE_HISTORY_H=1 -DHAVE_RL_COMPLETION_APPEND_CHARACTER=1 -DHAVE_RL_COMPLETION_MATCHES=1 -DHAVE_RL_FILENAME_COMPLETION_FUNCTION=1 -DHAVE_HISTORY_TRUNCATE_FILE=1 -Wl,-R$(LIBEDIT_LIB_PATH) -fPIC
endif
#CPPFLAGS = @CPPFLAGS@
ifeq ($(enable_ut), yes)
CPPFLAGS = @CPPFLAGS@ -fPIC
else
ifeq ($(POSTGIS_PGSQL_VERSION), 92)
CPPFLAGS = @CPPFLAGS@ -fPIC
else
ifeq ($(enable_debug), no)
CPPFLAGS = @CPPFLAGS@ -fPIE
endif
endif
endif
ifeq ($(enable_multiple_nodes), yes)
ifeq ($(enable_qunit), yes)
override CPPFLAGS := -I$(top_srcdir)/../distribute/test/QUnit/src/include $(CPPFLAGS)
endif
override CPPFLAGS := -I$(top_srcdir)/../distribute/include $(CPPFLAGS)
else
ifeq ($(enable_qunit), yes)
override CPPFLAGS := -I$(top_srcdir)/src/test/QUnit/src/include $(CPPFLAGS)
endif
endif
ifeq ($(enable_privategauss), yes)
ifeq ($(enable_qunit), yes)
override CPPFLAGS := -I$(top_srcdir)/../distribute/test/QUnit/src/include $(CPPFLAGS)
endif
override CPPFLAGS := -I$(top_srcdir)/../distribute/include $(CPPFLAGS)
else
ifeq ($(enable_qunit), yes)
override CPPFLAGS := -I$(top_srcdir)/src/test/QUnit/src/include $(CPPFLAGS)
endif
endif
ifdef PGXS
override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) -I$(top_builddir)/src/lib/gstrace $(CPPFLAGS)
else # not PGXS
override CPPFLAGS := -I$(top_srcdir)/src/include -I$(top_builddir)/src/lib/gstrace $(CPPFLAGS)
ifdef VPATH
override CPPFLAGS := -I$(top_builddir)/src/include -I$(top_builddir)/src/lib/gstrace $(CPPFLAGS)
endif
endif
override CPPFLAGS := $(CPPFLAGS) -I$(LIBODBC_INCLUDE_PATH) -I$(LIBOBS_INCLUDE_PATH) -I$(LIBCGROUP_INCLUDE_PATH) -I$(LIBOPENSSL_INCLUDE_PATH) -I${BOOST_INCLUDE_PATH} -I$(LIBLLVM_INCLUDE_PATH) -I$(KERBEROS_INCLUDE_PATH) -I$(CJSON_INCLUDE_PATH) -I$(NUMA_INCLUDE_PATH) -I$(ZLIB_INCLUDE_PATH) -I$(LZ4_INCLUDE_PATH) -I$(ZSTD_INCLUDE_PATH) -I$(LIBCURL_INCLUDE_PATH) -I$(AWSSDK_INCLUDE_PATH) -I$(DCF_INCLUDE_PATH)
# GDS links to libevent
ifeq ($(enable_multiple_nodes), yes)
override CPPFLAGS := $(CPPFLAGS) -I$(EVENT_INCLUDE_PATH)
else
ifeq ($(enable_multiple_nodes)_$(enable_privategauss), no_yes)
override CPPFLAGS := $(CPPFLAGS) -I$(EVENT_INCLUDE_PATH)
endif
endif
ifeq ($(SUPPORT_HOTPATCH), yes)
override CPPFLAGS := $(CPPFLAGS) -I$(LIBHOTPATCH_INCLUDE_PATH)
endif
ifeq ($(enable_mot), yes)
override CPPFLAGS := $(CPPFLAGS) -I$(MASSTREE_INCLUDE_PATH)
endif
ifeq ($(enable_x86_rdtscp), yes)
override CPPFLAGS := $(CPPFLAGS) -DENABLE_X86_RDTSCP
endif
ifeq ($(enable_htap), yes)
override CPPFLAGS := $(CPPFLAGS) -DENABLE_HTAP
endif
ifeq ($(with_openeuler_os), yes)
override CPPFLAGS := $(CPPFLAGS) -DWITH_OPENEULER_OS
endif
ifeq ($(with_openeuler_major), yes)
override CPPFLAGS := $(CPPFLAGS) -DOPENEULER_MAJOR
endif
ifeq ($(with_obs), yes)
override CPPFLAGS := $(CPPFLAGS) -DENABLE_OBS
endif
CC = @CC@
GCC = @GCC@
C = gcc
SUN_STUDIO_CC = @SUN_STUDIO_CC@
CFLAGS_SSE42 = @CFLAGS_SSE42@
ifeq ($(enable_llt), yes)
CFLAGS = @CFLAGS@ $(PTHREAD_CFLAGS) -Wl,-R$(LIBEDIT_LIB_PATH) -fPIC
else
ifeq ($(POSTGIS_PGSQL_VERSION), 92)
CFLAGS = @CFLAGS@ $(PTHREAD_CFLAGS) -fPIC
else
ifeq ($(enable_debug), no)
CFLAGS = @CFLAGS@ $(PTHREAD_CFLAGS) -fPIE
else
CFLAGS = @CFLAGS@ $(PTHREAD_CFLAGS)
endif
endif
endif
ifeq ($(enable_llt), no)
ifeq ($(enable_ut), yes)
CFLAGS = @CFLAGS@ -fPIC
else
ifeq ($(POSTGIS_PGSQL_VERSION), 92)
CFLAGS = @CFLAGS@ -fPIC
else
ifeq ($(enable_debug), no)
CFLAGS = @CFLAGS@ -fPIE
else
CFLAGS = @CFLAGS@
endif
endif
endif
endif
CXXFLAGS = @CFLAGS@
ifeq ($(enable_memory_check), yes)
CXXFLAGS += -fsanitize=address -fsanitize=leak -fno-omit-frame-pointer
else
CXXFLAGS += -fstack-protector
endif
ifeq ($(enable_thread_check), yes)
CXXFLAGS += -fsanitize=thread -fno-omit-frame-pointer
endif
CXXFLAGS += -Wl,-z,relro,-z,now
CXXFLAGS += -Wl,-z,noexecstack
CXXFLAGS += -std=c++14
override CXXFLAGS += $(PTHREAD_CFLAGS)
override CPPFLAGS += -DZSTD_STATIC_LINKING_ONLY
CXXFLAGS_VECTOR = @CXXFLAGS_VECTOR@
# Kind-of compilers
BISON = @BISON@
BISONFLAGS = @BISONFLAGS@ $(YFLAGS)
FLEX = @FLEX@
FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
DTRACE = @DTRACE@
DTRACEFLAGS = @DTRACEFLAGS@
ZIC = @ZIC@
# Linking
AR = @AR@
DLLTOOL = @DLLTOOL@
DLLWRAP = @DLLWRAP@
LIBS = @LIBS@
# append linking lib for OPENSSL
LIBS += -lssl -lcrypto # append linking lib from Huawei_Secure_C
LIBS += -l$(SECURE_C_CHECK)
# append linking lib for threading
ifeq ($(enable_debug), no)
LIBS += -pthread -D_REENTRANT -lrt -pie
else
LIBS += -pthread -D_REENTRANT -lrt
endif
ifeq ($(enable_memory_check), yes)
LIBS += -l$(MEMCHECK_LIB_NAME_ASAN)
else
ifeq ($(enable_thread_check), yes)
LIBS += -l$(MEMCHECK_LIB_NAME_TSAN)
endif
endif
##########################################################################
# append zlib for compression : zlib.a or zlib_pic.a
############################################################################
LIBS += -lz -lminiunz
LDAP_LIBS_FE = @LDAP_LIBS_FE@
LDAP_LIBS_BE = @LDAP_LIBS_BE@
OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
LD = @LD@
with_gnu_ld = @with_gnu_ld@
ld_R_works = @ld_R_works@
# We want -L for libpgport.a to be first in LDFLAGS. We also need LDFLAGS
# to be a "recursively expanded" variable, else adjustments to rpathdir
# don't work right. So we must NOT do LDFLAGS := something, meaning this has
# to be done first and elsewhere we must only do LDFLAGS += something.
# PGXC_BEGIN
ifdef PGXS
LDFLAGS = -L$(libdir) -pthread
else
LDFLAGS = -L$(top_builddir)/src/common/port -pthread
endif
# PGXC_END
# append zlib for compression: zlib
LDFLAGS += -L$(ZLIB_LIB_PATH) -I$(ZLIB_INCLUDE_PATH)
#append zstd for compression: zstd
LDFLAGS += -L$(ZSTD_LIB_PATH) -I$(ZSTD_INCLUDE_PATH)
LDFLAGS += -L$(LZ4_LIB_PATH)
LDFLAGS += -L$(SECURE_LIB_PATH)
LDFLAGS += -L$(LIBOPENSSL_LIB_PATH)
LDFLAGS += -L$(LIBSTD_LIB_PATH)
LDFLAGS += -L$(LIBCGROUP_LIB_PATH)
ifeq ($(SUPPORT_HOTPATCH), yes)
LDFLAGS += -L$(LIBHOTPATCH_LIB_PATH)
endif
ifeq ($(enable_bbox), yes)
LDFLAGS += -L$(BBOX_LIB_PATH)
endif
LDFLAGS += -L$(LIBODBC_LIB_PATH)
LDFLAGS += -L$(LIBOBS_LIB_PATH)
LDFLAGS += -L$(KERBEROS_LIB_PATH)
ifeq ($(enable_memory_check), yes)
LDFLAGS += -L$(MEMCHECK_LIB_PATH) -fsanitize=address -fsanitize=leak -fno-omit-frame-pointer
endif
LDFLAGS += -L$(GSTRACE_LIB_PATH)
LDFLAGS += -L$(NUMA_LIB_PATH)
LDFLAGS += -L$(LIBCURL_LIB_PATH)
LDFLAGS += -L$(AWSSDK_LIB_PATH)
ifeq ($(enable_mot), yes)
LDFLAGS += -L$(MASSTREE_LIB_PATH)
endif
LDFLAGS += @LDFLAGS@
LDFLAGS_EX = @LDFLAGS_EX@
# LDFLAGS_SL might have already been assigned by calling makefile
LDFLAGS_SL += @LDFLAGS_SL@
LDREL = -r
LDOUT = -o
RANLIB = @RANLIB@
WINDRES = @WINDRES@
X = @EXEEXT@
ifeq ($(with_3rd), NONE)
LIBTINFO_HOME = $(top_builddir)/$(BINARYPATH)/ncurses/comm
ETCD_HOME = $(top_builddir)/$(BINARYPATH)/etcd/comm
else
LIBTINFO_HOME = $(with_3rd)/$(BINARYPATH)/ncurses/comm
ETCD_HOME = $(with_3rd)/$(BINARYPATH)/etcd/comm
endif
#############################################################################
# libtinfo component
#############################################################################
LIBTINFO_INCLUDE_PATH = $(LIBTINFO_HOME)/include
LIBTINFO_LIB_PATH = $(LIBTINFO_HOME)/lib
#############################################################################
#############################################################################
# etcd component
#############################################################################
ETCD_BIN_PATH = $(ETCD_HOME)/bin
#############################################################################
#############################################################################
# nanomsg component
#############################################################################
LIBNANOMSG_INCLUDE_PATH = $(LIBNANOMSG_HOME)/include
LIBNANOMSG_LIB_PATH = $(LIBNANOMSG_HOME)/lib
TOOLSDIR = $(top_srcdir)/src/tools
GEN_KEYWORDLIST = $(PERL) -I $(TOOLSDIR) $(TOOLSDIR)/gen_keywordlist.pl
GEN_KEYWORDLIST_DEPS = $(TOOLSDIR)/gen_keywordlist.pl $(TOOLSDIR)/PerfectHash.pm
#############################################################################
# curl component
#############################################################################
LIBCURL_INCLUDE_PATH = $(LIBCURL_HOME)/include
LIBCURL_LIB_PATH = $(LIBCURL_HOME)/lib
#############################################################################
# awssdk component
#############################################################################
AWSSDK_INCLUDE_PATH = $(AWSSDK_HOME)/include
AWSSDK_LIB_PATH = $(AWSSDK_HOME)/lib
#############################################################################
# Perl
ifneq (@PERL@,)
# quoted to protect pathname with spaces
PERL = '@PERL@'
else
PERL = $(missing) perl
endif
# Miscellaneous
AWK = @AWK@
LN_S = @LN_S@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
PYTHON = @PYTHON@
TAR = @TAR@
XGETTEXT = @XGETTEXT@
GZIP = gzip
BZIP2 = bzip2
# Installation.
INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
INSTALL_SCRIPT_MODE = 755
INSTALL_DATA_MODE = 644
INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE)
INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
# Override in Makefile.port if necessary
INSTALL_SHLIB_OPTS = -m 755
MKDIR_P = @MKDIR_P@
missing = $(SHELL) $(top_srcdir)/config/missing
STRIP = @STRIP@
STRIP_STATIC_LIB = @STRIP_STATIC_LIB@
STRIP_SHARED_LIB = @STRIP_SHARED_LIB@
# Documentation
have_docbook = @have_docbook@
COLLATEINDEX = @COLLATEINDEX@
DOCBOOKSTYLE = @DOCBOOKSTYLE@
JADE = @JADE@
NSGMLS = @NSGMLS@
OSX = @OSX@
XSLTPROC = @XSLTPROC@
# Code coverage
GCOV = @GCOV@
LCOV = @LCOV@
GENHTML = @GENHTML@
ifeq ($(enable_coverage),yes)
# ccache loses .gcno files
export CCACHE_DISABLE = 1
endif
# Feature settings
DEF_PGPORT = @default_port@
WANTED_LANGUAGES = @WANTED_LANGUAGES@
##########################################################################
#
# Additional platform-specific settings
#
# Name of the "template"
PORTNAME= @PORTNAME@
build_os = @build_os@
host_tuple = @host@
host_os = @host_os@
host_cpu = @host_cpu@
# Make HAVE_IPV6 available for initdb script creation
HAVE_IPV6= @HAVE_IPV6@
# The HP-UX port makefile, for one, needs access to this symbol
HAVE_POSIX_SIGNALS= @HAVE_POSIX_SIGNALS@
# This is mainly for use on FreeBSD, where we have both a.out and elf
# systems now. May be applicable to other systems to?
ELF_SYSTEM= @ELF_SYS@
# Backend stack size limit has to be hard-wired on Windows (it's in bytes)
WIN32_STACK_RLIMIT=4194304
# Set if we have a working win32 crashdump header
have_win32_dbghelp = @have_win32_dbghelp@
# Pull in platform-specific magic
include $(top_builddir)/src/Makefile.port
# Set up rpath if enabled. By default it will point to our libdir,
# but individual Makefiles can force other rpath paths if needed.
rpathdir = $(libdir)
ifeq ($(enable_rpath), yes)
LDFLAGS += $(rpath)
endif
# jemalloc
ifeq ($(enable_jemalloc), yes)
LDFLAGS += -L$(JEMALLOC_LIB_PATH)
CXXFLAGS += -I$(JEMALLOC_INCLUDE_PATH)
endif
ifeq ($(enable_jemalloc_debug), yes)
LDFLAGS += -L$(JEMALLOC_LIB_PATH)
CXXFLAGS += -I$(JEMALLOC_INCLUDE_PATH)
endif
##########################################################################
#
# Some variables needed to find some client interfaces
ifdef PGXS
# some contribs assumes headers and libs are in the source tree...
libpq_srcdir = $(includedir)
libpq_builddir = $(libdir)
else
libpq_srcdir = $(top_srcdir)/src/common/interfaces/libpq
libpq_builddir = $(top_builddir)/src/common/interfaces/libpq
endif
# This macro is for use by libraries linking to libpq. (Because libpgport
# isn't created with the same link flags as libpq, it can't be used.)
libpq = -L$(libpq_builddir) -lpq
ifneq ($(enable_multiple_nodes)_$(enable_privategauss), no_no)
ifneq ($(enable_lite_mode), yes)
libpq_ce = -L$(libpq_builddir) -lpq_ce -L$(top_builddir)/../distribute/bin/gs_ktool/ -lgs_ktool -l$(SECURE_C_CHECK) -lkmc
endif
else
libpq_ce = -L$(libpq_builddir) -lpq_ce
endif
# If doing static linking, shared library dependency info isn't available,
# so add in the libraries that libpq depends on.
ifeq ($(enable_shared), no)
libpq += $(filter -lintl -lkrb5 -lcrypt, $(LIBS)) \
$(LDAP_LIBS_FE) $(PTHREAD_LIBS)
endif
# This macro is for use by client executables (not libraries) that use libpq.
# We force clients to pull symbols from the non-shared library libpgport
# rather than pulling some libpgport symbols from libpq just because
# libpq uses those functions too. This makes applications less
# dependent on changes in libpq's usage of pgport. To do this we link to
# pgport before libpq. This does cause duplicate -lpgport's to appear
# on client link lines.
ifdef PGXS
libpq_pgport = -L$(libdir) -lpgport $(libpq)
else
libpq_pgport = -L$(top_builddir)/src/common/port -lpgport $(libpq)
endif
ifneq ($(enable_lite_mode), yes)
submake-libpq_ce: submake-libpq_ce-actually
flock $(libpq_builddir)/jdbc/jdbc.lock $(MAKE) -C $(libpq_builddir)/jdbc
submake-libpq_ce-actually:
flock $(libpq_builddir)/libpq.lock $(MAKE) -C $(libpq_builddir) ENABLE_CE=1
endif
submake-libpq:
flock $(libpq_builddir)/libpq.lock $(MAKE) -C $(libpq_builddir) all
submake-libpgport:
$(MAKE) -C $(top_builddir)/src/common/port all
submake-libplpgsql:
$(MAKE) -C $(top_builddir)/src/common/pl/plpgsql/src all
submake-pagecompression:
$(MAKE) -C $(top_builddir)/src/lib/page_compression all
submake-libalarmclient:
$(MAKE) -C $(top_builddir)/src/lib/alarm
submake-kwlist-clean:
rm $(top_srcdir)/src/include/parser/kwlist_d.h -f
$(top_srcdir)/src/include/parser/kwlist_d.h: $(top_srcdir)/src/include/parser/kwlist.h $(GEN_KEYWORDLIST_DEPS)
$(GEN_KEYWORDLIST) --extern -o $(top_srcdir)/src/include/parser $(top_srcdir)/src/include/parser/kwlist.h
.PHONY: submake-libpq submake-libpgport submake-libplpgsql submake-libalarmclient submake-pagecompression
##########################################################################
#
# Testing support
PL_TESTDB = pl_regression
CONTRIB_TESTDB = contrib_regression
ifneq ($(MODULE_big),)
CONTRIB_TESTDB_MODULE = contrib_regression_$(MODULE_big)
else
ifneq ($(MODULES),)
CONTRIB_TESTDB_MODULE = contrib_regression_$(MODULES)
else
CONTRIB_TESTDB_MODULE = contrib_regression
endif
endif
ifdef NO_LOCALE
NOLOCALE += --no-locale
endif
ifeq ($(enable_multiple_nodes), yes)
pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE)
ifeq ($(enable_memory_check), yes)
pg_regress_check = export ASAN_OPTIONS='unmap_shadow_on_exit=1:abort_on_error=1:detect_leaks=1:force_check_leak=1:halt_on_error=0:alloc_dealloc_mismatch=0:fast_unwind_on_fatal=1:log_path=$(HOME)/memchk/asan/runlog' && \
export LSAN_OPTIONS='exitcode=0:suppressions=$(abs_top_srcdir)/Tools/memory_check/memleak_ignore' && \
$(root_builddir)/distribute/test/regress/pg_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
pg_regress_installcheck = export ASAN_OPTIONS='unmap_shadow_on_exit=1:abort_on_error=1:detect_leaks=1:force_check_leak=1:halt_on_error=0:alloc_dealloc_mismatch=0:fast_unwind_on_fatal=1:log_path=$(HOME)/memchk/asan/runlog' && \
export LSAN_OPTIONS='exitcode=0:suppressions=$(abs_top_srcdir)/Tools/memory_check/memleak_ignore' && \
$(root_builddir)/distribute/test/regress/pg_regress --inputdir=$(srcdir) --psqldir='$(PSQLDIR)' $(pg_regress_locale_flags)
EXTRA_REGRESS_OPTS = --ignore-exitcode --keep-run
else
pg_regress_check = $(root_builddir)/distribute/test/regress/pg_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
pg_regress_installcheck = $(root_builddir)/distribute/test/regress/pg_regress --inputdir=$(srcdir) --psqldir='$(PSQLDIR)' $(pg_regress_locale_flags)
endif
pg_regress_clean_files = regression.diffs regression.out tmp_check/ log/
pg_isolation_regress_check = $(root_builddir)/distribute/test/isolation/pg_isolation_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
pg_isolation_regress_installcheck = $(root_builddir)/distribute/test/isolation/pg_isolation_regress --inputdir=$(srcdir) --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
else
pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE)
ifeq ($(enable_memory_check), yes)
pg_regress_check = export ASAN_OPTIONS='unmap_shadow_on_exit=1:abort_on_error=1:detect_leaks=1:force_check_leak=1:halt_on_error=0:alloc_dealloc_mismatch=0:fast_unwind_on_fatal=1:log_path=$(HOME)/memchk/asan/runlog:detect_odr_violation=0' && \
export LSAN_OPTIONS='exitcode=0:suppressions=$(abs_top_srcdir)/Tools/memory_check/memleak_ignore' && \
$(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
pg_regress_installcheck = export ASAN_OPTIONS='unmap_shadow_on_exit=1:abort_on_error=1:detect_leaks=1:force_check_leak=1:halt_on_error=0:alloc_dealloc_mismatch=0:fast_unwind_on_fatal=1:log_path=$(HOME)/memchk/asan/runlog' && \
export LSAN_OPTIONS='exitcode=0:suppressions=$(abs_top_srcdir)/Tools/memory_check/memleak_ignore' && \
$(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --psqldir='$(PSQLDIR)' $(pg_regress_locale_flags)
EXTRA_REGRESS_OPTS = --ignore-exitcode --keep-run
else
pg_regress_check = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
pg_regress_installcheck = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --psqldir='$(PSQLDIR)' $(pg_regress_locale_flags)
endif
pg_regress_clean_files = regression.diffs regression.out tmp_check/ log/
pg_isolation_regress_check = $(top_builddir)/src/test/isolation/pg_isolation_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
pg_isolation_regress_installcheck = $(top_builddir)/src/test/isolation/pg_isolation_regress --inputdir=$(srcdir) --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
endif
##########################################################################
#
# Customization
#
# This includes your local customizations if Makefile.custom exists
# in the source directory. This file doesn't exist in the original
# distribution so that it doesn't get overwritten when you upgrade.
#
# NOTE: Makefile.custom is from the pre-Autoconf days of PostgreSQL.
# You are liable to shoot yourself in the foot if you use it without
# knowing exactly what you're doing. The preferred (and more
# reliable) method is to communicate what you want to do to the
# configure script, and leave the makefiles alone.
-include $(top_srcdir)/src/Makefile.custom
ifneq ($(CUSTOM_INSTALL),)
INSTALL= $(CUSTOM_INSTALL)
endif
ifneq ($(CUSTOM_CC),)
CC= $(CUSTOM_CC)
endif
ifneq ($(CUSTOM_COPT),)
COPT= $(CUSTOM_COPT)
endif
ifdef COPT
CXXFLAGS += $(COPT)
LDFLAGS += $(COPT)
endif
ifdef PROFILE
CXXFLAGS += $(PROFILE)
LDFLAGS += $(PROFILE)
endif
ifeq ($(enable_libnet), yes)
LIBNET_HOME =/usr
LIBNET_INCLUDE_PATH = $(LIBNET_HOME)/include
LIBNET_LIB_PATH = $(LIBNET_HOME)/lib64
LIBNET_BIN_PATH = $(LIBNET_HOME)/bin
LIBNET_LIBS = -L$(SECURE_LIB_PATH) -l$(SECURE_C_CHECK) -L$(LIBNET_LIB_PATH) -llstack -lrte_eal -lrte_kvargs -ldl
override CPPFLAGS := $(CPPFLAGS) -DUSE_LIBNET
override CXXFLAGS := $(CXXFLAGS) -DUSE_LIBNET
override CFLAGS := $(CFLAGS) -DUSE_LIBNET
endif
override CPPFLAGS := $(CPPFLAGS) -DUSE_SPQ
##########################################################################
#
# substitute implementations of C library routines (see src/port/)
# note we already included -L.../src/common/port in LDFLAGS above
LIBOBJS = @LIBOBJS@
LIBS := -lpgport $(LIBS)
# to make ws2_32.lib the last library, and always link with shfolder,
# so SHGetFolderName isn't picked up from shell32.dll
ifeq ($(PORTNAME),win32)
LIBS += -lws2_32 -lshfolder
endif
# Not really standard libc functions, used by the backend.
TAS = @TAS@
##########################################################################
#
# Global targets and rules
%.i: %.cpp
$(CPP) $(CPPFLAGS) -o $@ $<
%.gz: %
$(GZIP) --best -c $< >$@
%.bz2: %
$(BZIP2) -c $< >$@
# Direct builds of foo.c -> foo are disabled to avoid generating
# *.dSYM junk on Macs. All builds should normally go through the
# foo.c -> foo.o -> foo steps. This also ensures that dependency
# tracking (see below) is used.
%: %.c
ifndef PGXS
# Remake Makefile.global from Makefile.global.in if the latter
# changed. In order to trigger this rule, the including file must
# write `include $(top_builddir)/src/Makefile.global', not some
# shortcut thereof.
$(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
cd $(top_builddir) && ./config.status src/Makefile.global
# Remake pg_config.h from pg_config.h.in if the latter changed.
# config.status will not change the timestamp on pg_config.h if it
# doesn't change, so as to avoid recompiling the entire tree
# unnecessarily. Therefore we make config.status update a timestamp file
# stamp-h every time it runs, so that we don't trigger this rule every time.
# (We do trigger the null rule for stamp-h to pg_config.h every time; so it's
# important for that rule to be empty!)
#
# Of course you need to turn on dependency tracking to get any
# dependencies on pg_config.h.
$(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h ;
$(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
cd $(top_builddir) && ./config.status src/include/pg_config.h
# Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
# logic as above.
$(top_builddir)/src/common/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/common/interfaces/ecpg/include/stamp-h ;
$(top_builddir)/src/common/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/common/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
cd $(top_builddir) && ./config.status src/common/interfaces/ecpg/include/ecpg_config.h
# When configure changes, rerun configure with the same options as
# last time. To change configure, you need to run autoconf manually.
$(top_builddir)/config.status: $(top_srcdir)/configure
cd $(top_builddir) && ./config.status --recheck
endif # not PGXS
ifeq "$(ENABLE_CE)" "1"
override CPPFLAGS += -DHAVE_CE
endif
install-strip:
@$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
INSTALL_STRIP_FLAG=-s \
install
##########################################################################
#
# Recursive make support
# ----------------------
# Instead of recursing through subdirectories with a for loop or
# repeated $(MAKE) -C whatever calls, this is a little smarter: it
# allows parallel make across directories and lets make -k and -q work
# correctly.
# We need the $(eval) function and order-only prerequisites, which are
# available in GNU make 3.80. That also happens to be the version
# where the .VARIABLES variable was introduced, so this is a simple check.
ifndef .VARIABLES
$(error GNU make 3.80 or newer is required. You are using version $(MAKE_VERSION))
endif
# This function is only for internal use below. It should be called
# using $(eval). It will set up a target so that it recurses into
# a given subdirectory. Note that to avoid a nasty bug in make 3.80,
# this function has to avoid using any complicated constructs (like
# multiple targets on a line) and also not contain any lines that expand
# to more than about 200 bytes. This is why we make it apply to just one
# subdirectory at a time, rather than to a list of subdirectories.
# $1: target name, e.g., all
# $2: subdir name
# $3: target to run in subdir, usually same as $1
define _create_recursive_target
.PHONY: $(1)-$(2)-recurse
$(1): $(1)-$(2)-recurse
$(1)-$(2)-recurse:
$$(MAKE) -C $(2) $(3)
endef
# Note that the use of $$ on the last line above is important; we want
# $(MAKE) to be evaluated when the rule is run, not when the $(eval) is run
# to create the rule. This is necessary to get make -q working.
# Call this function in a makefile that needs to recurse into subdirectories.
# In the normal case all arguments can be defaulted.
# $1: targets to make recursive (defaults to list of standard targets)
# $2: list of subdirs (defaults to SUBDIRS variable)
# $3: target to run in subdir (defaults to current element of $1)
recurse = $(foreach target,$(if $1,$1,$(standard_targets)),$(foreach subdir,$(if $2,$2,$(SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target))))))
# If a makefile's list of SUBDIRS varies depending on configuration, then
# any subdirectories excluded from SUBDIRS should instead be added to
# ALWAYS_SUBDIRS, and then it must call recurse_always as well as recurse.
# This ensures that distprep, distclean, etc will apply to all subdirectories.
# In the normal case all arguments will be defaulted.
# $1: targets to make recursive (defaults to standard_always_targets)
# $2: list of subdirs (defaults to ALWAYS_SUBDIRS variable)
# $3: target to run in subdir (defaults to current element of $1)
recurse_always = $(foreach target,$(if $1,$1,$(standard_always_targets)),$(foreach subdir,$(if $2,$2,$(ALWAYS_SUBDIRS)),$(eval $(call _create_recursive_target,$(target),$(subdir),$(if $3,$3,$(target))))))
##########################################################################
#
# Automatic dependency generation
# -------------------------------
# When we configure with --enable-depend then we override the default
# compilation rule with the magic below. While or after creating the
# actual output file we also create a dependency list for the .c file.
# Next time we invoke make we will have top-notch information about
# whether this file needs to be updated. The dependency files are kept
# in the .deps subdirectory of each directory.
autodepend = @autodepend@
ifeq ($(autodepend), yes)
ifndef COMPILE.c
COMPILE.c = $(C) $(CFLAGS) $(CPPFLAGS) -c
endif
ifndef COMPILE.cpp
COMPILE.cpp = $(CC) $(CXXFLAGS) $(CPPFLAGS) -c
endif
mywarningflags=-Wall -Werror -Wendif-labels -Wformat-security -Wmissing-format-attribute -Wpointer-arith -Wno-write-strings -Wno-attributes -Wno-unused-but-set-variable
CFLAGS += $(mywarningflags)
CXXFLAGS += $(mywarningflags)
DEPDIR = .deps
ifeq ($(GCC), yes)
# GCC allows us to create object and dependency file in one invocation.
%.o : %.cpp %.cc
@if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
$(COMPILE.cpp) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
%.o : %.c
@if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
$(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
endif # GCC
# Include all the dependency files generated for the current
# directory. List /dev/null as dummy because if the wildcard expands
# to nothing then make would complain.
-include $(wildcard $(DEPDIR)/*.Po) /dev/null
# hook for clean-up
clean distclean maintainer-clean: clean-deps
.PHONY: clean-deps
clean-deps:
@rm -rf $(DEPDIR)
# When in automatic dependency mode, never delete any intermediate
# files automatically. Otherwise, the following could happen: When
# starting from a clean source tree, the first build would delete the
# intermediate file, but also create the dependency file, which
# mentions the intermediate file, thus making it non-intermediate.
# The second build will then need to rebuild the now non-intermediate
# missing file. So the second build will do work even though nothing
# had changed. One place where this happens is the .c -> .o -> .so
# chain for some contrib modules.
.SECONDARY:
endif # autodepend
##########################################################################
#
# Native language support
ifeq ($(enable_nls), yes)
ifneq (,$(wildcard $(srcdir)/nls.mk))
include $(top_srcdir)/src/nls-global.mk
endif # nls.mk
endif # enable_nls
##########################################################################
#
# Coverage
# Explanation of involved files:
# foo.c source file
# foo.o object file
# foo.gcno gcov graph (a.k.a. "notes") file, created at compile time
# (by gcc -ftest-coverage)
# foo.gcda gcov data file, created when the program is run (for
# programs compiled with gcc -fprofile-arcs)
# foo.c.gcov gcov output file with coverage information, created by
# gcov from foo.gcda (by "make coverage")
# foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly
# interesting
# lcov.info lcov tracefile, built from gcda files in one directory,
# later collected by "make coverage-html"
ifeq ($(enable_coverage), yes)
# There is a strange interaction between lcov and existing .gcov
# output files. Hence the rm command and the ordering dependency.
gcda_files := $(wildcard *.gcda)
lcov.info: $(gcda_files)
rm -f *.gcov
$(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
%.c.gcov: %.gcda | lcov.info
$(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
coverage: $(gcda_files:.gcda=.c.gcov) lcov.info
.PHONY: coverage-html
coverage-html: coverage
rm -rf coverage
mkdir coverage
$(GENHTML) --show-details --legend --output-directory=coverage --title=PostgreSQL --num-spaces=4 --prefix=$(abs_top_srcdir) `find . -name lcov.info -print`
# hook for clean-up
clean distclean maintainer-clean: clean-coverage
.PHONY: clean-coverage
clean-coverage:
rm -rf coverage
rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out
# User-callable target to reset counts between test runs
coverage-clean:
rm -f `find . -name '*.gcda' -print`
endif # enable_coverage
#this code is used for increase compile
#%.depend : %.cpp
# $(CXX) -MM $(CPPFLAGS) $< > $@.$$$$;\
# sed 's,\($*\)\.o[:]*,\1.o $@ :,g'<$@.$$$$>$@;\
# rm -f $@.$$$$
#CPPSources = $(shell ls |grep ".cpp")
#DEPEND = $(CPPSources:.cpp=.depend)
