/* -------------------------------------------------------------------------
 *
 * unix_latch.c
 *    Routines for inter-process latches
 *
 * The Unix implementation uses the so-called self-pipe trick to overcome
 * the race condition involved with select() and setting a global flag
 * in the signal handler. When a latch is set and the current process
 * is waiting for it, the signal handler wakes up the select() in
 * WaitLatch by writing a byte to a pipe. A signal by itself doesn't
 * interrupt select() on all platforms, and even on platforms where it
 * does, a signal that arrives just before the select() call does not
 * prevent the select() from entering sleep. An incoming byte on a pipe
 * however reliably interrupts the sleep, and causes select() to return
 * immediately even if the signal arrives before select() begins.
 *
 * (Actually, we prefer poll() over select() where available, but the
 * same comments apply to it.)
 *
 * When SetLatch is called from the same process that owns the latch,
 * SetLatch writes the byte directly to the pipe. If it's owned by another
 * process, SIGUSR1 is sent and the signal handler in the waiting process
 * writes the byte to the pipe on behalf of the signaling process.
 *
 * Portions Copyright (c) 1996-2012, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 * IDENTIFICATION
 *    src/common/backend/port/unix_latch.c
 *
 * -------------------------------------------------------------------------
 */
#include "postgres.h"
#include "knl/knl_variable.h"

#include <fcntl.h>
#include <signal.h>
#include <sys/time.h>
#include <sys/types.h>
#ifdef HAVE_POLL_H
#include <poll.h>
#endif
#ifdef HAVE_SYS_POLL_H
#include <sys/poll.h>
#endif
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif

#include "miscadmin.h"
#include "portability/instr_time.h"
#include "postmaster/postmaster.h"
#include "storage/barrier.h"
#include "storage/latch.h"
#include "storage/pmsignal.h"
#include "storage/shmem.h"

#include "gssignal/gs_signal.h"

/* Are we currently in WaitLatch? The signal handler would like to know. */
THR_LOCAL volatile sig_atomic_t waiting = false;

/* Read and write ends of the self-pipe */
THR_LOCAL int selfpipe_readfd = -1;
THR_LOCAL int selfpipe_writefd = -1;

/* Private function prototypes */
static void sendSelfPipeByte(void);
static void drainSelfPipe(void);

/*
 * Initialize the process-local latch infrastructure.
 *
 * This must be called once during startup of any process that can wait on
 * latches, before it issues any InitLatch() or OwnLatch() calls.
 */
void InitializeLatchSupport(void)
{
    int pipefd[2];

    Assert(selfpipe_readfd == -1);

    /*
     * Set up the self-pipe that allows a signal handler to wake up the
     * select() in WaitLatch. Make the write-end non-blocking, so that
     * SetLatch won't block if the event has already been set many times
     * filling the kernel buffer. Make the read-end non-blocking too, so that
     * we can easily clear the pipe by reading until EAGAIN or EWOULDBLOCK.
     */
    if (pipe(pipefd) < 0)
        ereport(FATAL, (errmsg("pipe() failed: %m")));
    if (fcntl(pipefd[0], F_SETFL, O_NONBLOCK) < 0)
        ereport(FATAL, (errmsg("fcntl() failed on read-end of self-pipe: %m")));
    if (fcntl(pipefd[1], F_SETFL, O_NONBLOCK) < 0)
        ereport(FATAL, (errmsg("fcntl() failed on write-end of self-pipe: %m")));

    selfpipe_readfd = pipefd[0];
    selfpipe_writefd = pipefd[1];
}

/*
 * Initialize a backend-local latch.
 */
void InitLatch(volatile Latch* latch)
{
    /* Assert InitializeLatchSupport has been called in this process */
    Assert(selfpipe_readfd >= 0);

    latch->is_set = false;
    latch->owner_pid = t_thrd.proc_cxt.MyProcPid;
    latch->is_shared = false;
}

/*
 * Initialize a shared latch that can be set from other processes. The latch
 * is initially owned by no-one; use OwnLatch to associate it with the
 * current process.
 *
 * InitSharedLatch needs to be called in postmaster before forking child
 * processes, usually right after allocating the shared memory block
 * containing the latch with ShmemInitStruct. (The Unix implementation
 * doesn't actually require that, but the Windows one does.) Because of
 * this restriction, we have no concurrency issues to worry about here.
 */
void InitSharedLatch(volatile Latch* latch)
{
    latch->is_set = false;
    latch->owner_pid = 0;
    latch->is_shared = true;
}

/*
 * Associate a shared latch with the current process, allowing it to
 * wait on the latch.
 *
 * Although there is a sanity check for latch-already-owned, we don't do
 * any sort of locking here, meaning that we could fail to detect the error
 * if two processes try to own the same latch at about the same time.  If
 * there is any risk of that, caller must provide an interlock to prevent it.
 *
 * In any process that calls OwnLatch(), make sure that
 * latch_sigusr1_handler() is called from the SIGUSR1 signal handler,
 * as shared latches use SIGUSR1 for inter-process communication.
 */
void OwnLatch(volatile Latch* latch)
{
    /* Assert InitializeLatchSupport has been called in this process */
    Assert(selfpipe_readfd >= 0);

    Assert(latch->is_shared);

    /* sanity check */
    if (latch->owner_pid != 0)
        ereport(ERROR,
            (errcode(ERRCODE_SYSTEM_ERROR),
                errmsg("latch already owned by %lu, my pid %lu", latch->owner_pid, t_thrd.proc_cxt.MyProcPid)));

    latch->owner_pid = t_thrd.proc_cxt.MyProcPid;
}

/*
 * Disown a shared latch currently owned by the current process.
 */
void DisownLatch(volatile Latch* latch)
{
    Assert(latch->is_shared);
    Assert(latch->owner_pid == t_thrd.proc_cxt.MyProcPid);

    latch->owner_pid = 0;
}

/*
 * Wait for a given latch to be set, or for postmaster death, or until timeout
 * is exceeded. 'wakeEvents' is a bitmask that specifies which of those events
 * to wait for. If the latch is already set (and WL_LATCH_SET is given), the
 * function returns immediately.
 *
 * The 'timeout' is given in milliseconds. It must be >= 0 if WL_TIMEOUT flag
 * is given.  Note that some extra overhead is incurred when WL_TIMEOUT is
 * given, so avoid using a timeout if possible.
 *
 * The latch must be owned by the current process, ie. it must be a
 * backend-local latch initialized with InitLatch, or a shared latch
 * associated with the current process by calling OwnLatch.
 *
 * Returns bit mask indicating which condition(s) caused the wake-up. Note
 * that if multiple wake-up conditions are true, there is no guarantee that
 * we return all of them in one call, but we will return at least one.
 */
int WaitLatch(volatile Latch* latch, int wakeEvents, long timeout)
{
    return WaitLatchOrSocket(latch, wakeEvents, PGINVALID_SOCKET, timeout);
}

/*
 * Like WaitLatch, but with an extra socket argument for WL_SOCKET_*
 * conditions.
 *
 * When waiting on a socket, EOF and error conditions are reported by
 * returning the socket as readable/writable or both, depending on
 * WL_SOCKET_READBLE/WL_SOCKET_WRITEABLE being specified.
 */
int WaitLatchOrSocket(volatile Latch* latch, int wakeEvents, pgsocket sock, long timeout)
{
    int result = 0;
    int rc;
    instr_time start_time, cur_time;
    long cur_timeout;

#ifdef HAVE_POLL
    struct pollfd pfds[3];
    int nfds;
#else
    struct timeval tv, *tvp = NULL;
    fd_set input_mask;
    fd_set output_mask;
    int hifd;
#endif

    /* Ignore WL_SOCKET_* events if no valid socket is given */
    if (sock == PGINVALID_SOCKET)
        wakeEvents &= ~(WL_SOCKET_READABLE | WL_SOCKET_WRITEABLE);

    Assert(wakeEvents != 0); /* must have at least one wake event */

    if ((wakeEvents & WL_LATCH_SET) && latch->owner_pid != t_thrd.proc_cxt.MyProcPid)
        ereport(ERROR, (errcode(ERRCODE_INVALID_OPERATION), errmsg("cannot wait on a latch owned by another process")));

    /*
     * Initialize timeout if requested.  We must record the current time so
     * that we can determine the remaining timeout if the poll() or select()
     * is interrupted.	(On some platforms, select() will update the contents
     * of "tv" for us, but unfortunately we can't rely on that.)
     */
    if (wakeEvents & WL_TIMEOUT) {
        INSTR_TIME_SET_CURRENT(start_time);
        Assert(timeout >= 0);
        cur_timeout = timeout;

#ifndef HAVE_POLL
        tv.tv_sec = cur_timeout / 1000L;
        tv.tv_usec = (cur_timeout % 1000L) * 1000L;
        tvp = &tv;
#endif
    } else {
        cur_timeout = -1;

#ifndef HAVE_POLL
        tvp = NULL;
#endif
    }

    waiting = true;
    do {
        /*
         * Clear the pipe, then check if the latch is set already. If someone
         * sets the latch between this and the poll()/select() below, the
         * setter will write a byte to the pipe (or signal us and the signal
         * handler will do that), and the poll()/select() will return
         * immediately.
         *
         * Note: we assume that the kernel calls involved in drainSelfPipe()
         * and SetLatch() will provide adequate synchronization on machines
         * with weak memory ordering, so that we cannot miss seeing is_set if
         * the signal byte is already in the pipe when we drain it.
         */
        drainSelfPipe();

        if ((wakeEvents & WL_LATCH_SET) && latch->is_set) {
            result |= WL_LATCH_SET;

            /*
             * Leave loop immediately, avoid blocking again. We don't attempt
             * to report any other events that might also be satisfied.
             */
            break;
        }

        /* Must wait ... we use poll(2) if available, otherwise select(2) */
#ifdef HAVE_POLL
        nfds = 0;
        if (wakeEvents & (WL_SOCKET_READABLE | WL_SOCKET_WRITEABLE)) {
            /* socket, if used, is always in pfds[0] */
            pfds[0].fd = sock;
            pfds[0].events = 0;
            if (wakeEvents & WL_SOCKET_READABLE)
                pfds[0].events |= POLLIN;
            if (wakeEvents & WL_SOCKET_WRITEABLE)
                pfds[0].events |= POLLOUT;
            pfds[0].revents = 0;
            nfds++;
        }

        pfds[nfds].fd = selfpipe_readfd;
        pfds[nfds].events = POLLIN;
        pfds[nfds].revents = 0;
        nfds++;

        if (wakeEvents & WL_POSTMASTER_DEATH) {
            /* postmaster fd, if used, is always in pfds[nfds - 1] */
            pfds[nfds].fd = t_thrd.postmaster_cxt.postmaster_alive_fds[POSTMASTER_FD_WATCH];
            pfds[nfds].events = POLLIN;
            pfds[nfds].revents = 0;
            nfds++;
        }
        /* Sleep */
        rc = poll(pfds, nfds, (int)cur_timeout);
        /* Check return code */
        if (rc < 0) {
            /* EINTR is okay, otherwise complain */
            if (errno != EINTR) {
                waiting = false;
                ereport(ERROR, (errcode_for_socket_access(), errmsg("poll() failed: %m")));
            }
        } else if (rc == 0) {
            /* timeout exceeded */
            if (wakeEvents & WL_TIMEOUT)
                result |= WL_TIMEOUT;
        } else {
            /* at least one event occurred, so check revents values */
            if ((wakeEvents & WL_SOCKET_READABLE) && (pfds[0].revents & POLLIN)) {
                /* data available in socket, or EOF/error condition */
                result |= WL_SOCKET_READABLE;
            }
            if ((wakeEvents & WL_SOCKET_WRITEABLE) && (pfds[0].revents & POLLOUT)) {
                result |= WL_SOCKET_WRITEABLE;
            }
            if (pfds[0].revents & (POLLHUP | POLLERR | POLLNVAL)) {
                /* EOF/error condition */
                if (wakeEvents & WL_SOCKET_READABLE)
                    result |= WL_SOCKET_READABLE;
                if (wakeEvents & WL_SOCKET_WRITEABLE)
                    result |= WL_SOCKET_WRITEABLE;
            }
            /*
             * We expect a POLLHUP when the remote end is closed, but because
             * we don't expect the pipe to become readable or to have any
             * errors either, treat those cases as postmaster death, too.
             */
            if ((wakeEvents & WL_POSTMASTER_DEATH) &&
                (pfds[nfds - 1].revents & (POLLHUP | POLLIN | POLLERR | POLLNVAL))) {
                /*
                 * According to the select(2) man page on Linux, select(2) may
                 * spuriously return and report a file descriptor as readable,
                 * when it's not; and presumably so can poll(2).  It's not
                 * clear that the relevant cases would ever apply to the
                 * postmaster pipe, but since the consequences of falsely
                 * returning WL_POSTMASTER_DEATH could be pretty unpleasant,
                 * we take the trouble to positively verify EOF with
                 * PostmasterIsAlive().
                 */
                if (!PostmasterIsAlive()) {
                    result |= WL_POSTMASTER_DEATH;
                }
            }
        }
#else  /* !HAVE_POLL */

        FD_ZERO(&input_mask);
        FD_ZERO(&output_mask);

        FD_SET(selfpipe_readfd, &input_mask);
        hifd = selfpipe_readfd;

        if (wakeEvents & WL_POSTMASTER_DEATH) {
            FD_SET(t_thrd.postmaster_cxt.postmaster_alive_fds[POSTMASTER_FD_WATCH], &input_mask);
            if (t_thrd.postmaster_cxt.postmaster_alive_fds[POSTMASTER_FD_WATCH] > hifd)
                hifd = t_thrd.postmaster_cxt.postmaster_alive_fds[POSTMASTER_FD_WATCH];
        }

        if (wakeEvents & WL_SOCKET_READABLE) {
            FD_SET(sock, &input_mask);
            if (sock > hifd)
                hifd = sock;
        }

        if (wakeEvents & WL_SOCKET_WRITEABLE) {
            FD_SET(sock, &output_mask);
            if (sock > hifd)
                hifd = sock;
        }

        /* Sleep */
        rc = select(hifd + 1, &input_mask, &output_mask, NULL, tvp);
        /* Check return code */
        if (rc < 0) {
            /* EINTR is okay, otherwise complain */
            if (errno != EINTR) {
                waiting = false;
                ereport(ERROR, (errcode_for_socket_access(), errmsg("select() failed: %m")));
            }
        } else if (rc == 0) {
            /* timeout exceeded */
            if (wakeEvents & WL_TIMEOUT)
                result |= WL_TIMEOUT;
        } else {
            /* at least one event occurred, so check masks */
            if ((wakeEvents & WL_SOCKET_READABLE) && FD_ISSET(sock, &input_mask)) {
                /* data available in socket, or EOF */
                result |= WL_SOCKET_READABLE;
            }
            if ((wakeEvents & WL_SOCKET_WRITEABLE) && FD_ISSET(sock, &output_mask)) {
                /* socket is writable, or EOF */
                result |= WL_SOCKET_WRITEABLE;
            }
            if ((wakeEvents & WL_POSTMASTER_DEATH) &&
                FD_ISSET(t_thrd.postmaster_cxt.postmaster_alive_fds[POSTMASTER_FD_WATCH], &input_mask)) {
                /*
                 * According to the select(2) man page on Linux, select(2) may
                 * spuriously return and report a file descriptor as readable,
                 * when it's not; and presumably so can poll(2).  It's not
                 * clear that the relevant cases would ever apply to the
                 * postmaster pipe, but since the consequences of falsely
                 * returning WL_POSTMASTER_DEATH could be pretty unpleasant,
                 * we take the trouble to positively verify EOF with
                 * PostmasterIsAlive().
                 */
                if (!PostmasterIsAlive())
                    result |= WL_POSTMASTER_DEATH;
            }
        }
#endif /* HAVE_POLL */

        /* If we're not done, update cur_timeout for next iteration */
        if (result == 0 && cur_timeout >= 0) {
            INSTR_TIME_SET_CURRENT(cur_time);
            INSTR_TIME_SUBTRACT(cur_time, start_time);
            cur_timeout = timeout - (long)INSTR_TIME_GET_MILLISEC(cur_time);
            if (cur_timeout < 0) {
                cur_timeout = 0;
            } else if (cur_timeout > timeout) {
                cur_timeout = timeout;
            }

#ifndef HAVE_POLL
            tv.tv_sec = cur_timeout / 1000L;
            tv.tv_usec = (cur_timeout % 1000L) * 1000L;
#endif
        }
    } while (result == 0);
    waiting = false;

    return result;
}

/*
 * Sets a latch and wakes up anyone waiting on it.
 *
 * This is cheap if the latch is already set, otherwise not so much.
 *
 * NB: when calling this in a signal handler, be sure to save and restore
 * errno around it.  (That's standard practice in most signal handlers, of
 * course, but we used to omit it in handlers that only set a flag.)
 */
void SetLatch(volatile Latch* latch)
{
    ThreadId owner_pid;

    /*
     * The memory barrier has be to be placed here to ensure that any flag
     * variables possibly changed by this process have been flushed to main
     * memory, before we check/set is_set.
     */
    pg_memory_barrier();

    /* Quick exit if already set */
    if (latch->is_set)
        return;

    latch->is_set = true;

    /*
     * See if anyone's waiting for the latch. It can be the current process if
     * we're in a signal handler. We use the self-pipe to wake up the select()
     * in that case. If it's another process, send a signal.
     *
     * Fetch owner_pid only once, in case the latch is concurrently getting
     * owned or disowned. XXX: This assumes that pid_t is atomic, which isn't
     * guaranteed to be true! In practice, the effective range of pid_t fits
     * in a 32 bit integer, and so should be atomic. In the worst case, we
     * might end up signaling the wrong process. Even then, you're very
     * unlucky if a process with that bogus pid exists and belongs to
     * openGauss; and PG database processes should handle excess SIGUSR1
     * interrupts without a problem anyhow.
     *
     * Another sort of race condition that's possible here is for a new
     * process to own the latch immediately after we look, so we don't signal
     * it. This is okay so long as all callers of ResetLatch/WaitLatch follow
     * the standard coding convention of waiting at the bottom of their loops,
     * not the top, so that they'll correctly process latch-setting events
     * that happen before they enter the loop.
     */
    owner_pid = latch->owner_pid;
    if (owner_pid == 0)
        return;
    else if (owner_pid == t_thrd.proc_cxt.MyProcPid) {
        if (waiting)
            sendSelfPipeByte();
    } else
        gs_signal_send(owner_pid, SIGUSR1);
}

/*
 * Clear the latch. Calling WaitLatch after this will sleep, unless
 * the latch is set again before the WaitLatch call.
 */
void ResetLatch(volatile Latch* latch)
{
    /* Only the owner should reset the latch */
    Assert(latch->owner_pid == t_thrd.proc_cxt.MyProcPid);

    latch->is_set = false;

    /*
     * Ensure that the write to is_set gets flushed to main memory before we
     * examine any flag variables.  Otherwise a concurrent SetLatch might
     * falsely conclude that it needn't signal us, even though we have missed
     * seeing some flag updates that SetLatch was supposed to inform us of.
     */
    pg_memory_barrier();
}

/*
 * SetLatch uses SIGUSR1 to wake up the process waiting on the latch.
 *
 * Wake up WaitLatch, if we're waiting.  (We might not be, since SIGUSR1 is
 * overloaded for multiple purposes; or we might not have reached WaitLatch
 * yet, in which case we don't need to fill the pipe either.)
 *
 * NB: when calling this in a signal handler, be sure to save and restore
 * errno around it.
 */
void latch_sigusr1_handler(void)
{
    if (waiting)
        sendSelfPipeByte();
}

/* Send one byte to the self-pipe, to wake up WaitLatch */
static void sendSelfPipeByte(void)
{
    int rc;
    char dummy = 0;

retry:
    rc = write(selfpipe_writefd, &dummy, 1);
    if (rc < 0) {
        /* If interrupted by signal, just retry */
        if (errno == EINTR)
            goto retry;

        /*
         * If the pipe is full, we don't need to retry, the data that's there
         * already is enough to wake up WaitLatch.
         */
        if (errno == EAGAIN || errno == EWOULDBLOCK)
            return;

        /*
         * Oops, the write() failed for some other reason. We might be in a
         * signal handler, so it's not safe to elog(). We have no choice but
         * silently ignore the error.
         */
        return;
    }
}

/*
 * Read all available data from the self-pipe
 *
 * Note: this is only called when waiting = true.  If it fails and doesn't
 * return, it must reset that flag first (though ideally, this will never
 * happen).
 */
static void drainSelfPipe(void)
{
    /*
     * There shouldn't normally be more than one byte in the pipe, or maybe a
     * few bytes if multiple processes run SetLatch at the same instant.
     */
    char buf[16];
    int rc;

    for (;;) {
        rc = read(selfpipe_readfd, buf, sizeof(buf));
        if (rc < 0) {
            if (errno == EAGAIN || errno == EWOULDBLOCK)
                break; /* the pipe is empty */
            else if (errno == EINTR)
                continue; /* retry */
            else {
                waiting = false;
                ereport(ERROR, (errcode(ERRCODE_SYSTEM_ERROR), errmsg("read() on self-pipe failed: %m")));
            }
        } else if (rc == 0) {
            waiting = false;
            ereport(ERROR, (errcode(ERRCODE_INVALID_OPERATION), errmsg("unexpected EOF on self-pipe")));
        } else if (rc < (int)sizeof(buf)) {
            /* we successfully drained the pipe; no need to read() again */
            break;
        }
        /* else buffer wasn't big enough, so read again */
    }
}

void ClosePipesAtThreadExit(void)
{
    if (selfpipe_readfd >= 0) {
        Assert(selfpipe_readfd >= 0);
        close(selfpipe_readfd);
        selfpipe_readfd = -1;
    }

    if (selfpipe_writefd >= 0) {
        Assert(selfpipe_writefd >= 0);
        close(selfpipe_writefd);
        selfpipe_writefd = -1;
    }
}