# Copyright (c) 2023 Huawei Device Co., Ltd.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Contributor: 城meto <myxuan475@126.com>
# Maintainer: 城meto <myxuan475@126.com>
pkgname=libffi
pkgver=v3.4.4
pkgrel=0
pkgdesc="The libffi library provides a portable, high level programming interface to various calling conventions."
url="https://github.com/libffi/libffi"
archs=("armeabi-v7a" "arm64-v8a")
license=("MIT" "GPL-2.0-only")
depends=()
makedepends=("automake" "makeinfo") # makeinfo需要安装的是texinfo
# 官方下载地址https://github.com/libffi/$pkgname/archive/refs/tags/$pkgver.tar.gz受网络影响可能存在下载失败的情况，现使用gitee镜像可以与官方仓库保持同步
source="https://gitee.com/lycium_pkg_mirror/$pkgname/repository/archive/$pkgver.zip"
buildtools="configure"
autounpack=true
downloadpackage=true
genconfigure=true
autoconfbuild=true
libtoolbuild=true
prefixpath=
oldlibpath=$LD_LIBRARY_PATH
builddir=$pkgname-$pkgver
packagename=$pkgname-$pkgver.zip
source envset.sh
host=
cc=
prefixlibffi=
# 编译gnu工具
buildgnutool() {
toolname=$1
toolver=$2
toolpath=$toolname-$toolver
prefixpath=`pwd`/$toolpath/install_dir
down=0
rm -rf $toolpath
if [ ! -f $toolname-$toolver.tar.xz ];then
wget -O $toolname-$toolver.tar.gz -c http://ftp.gnu.org/gnu/$toolname/$toolname-$toolver.tar.xz > $publicbuildlog 2>&1
down=$?
fi
if [ $down -ne 0 ];then
return -1
fi
tar -xf $toolname-$toolver.tar.gz
cd $toolpath
PKG_CONFIG_LIBDIR="${pkgconfigpath}" ./configure --prefix=$prefixpath >> $buildlog 2>&1
$MAKE VERBOSE=1 >> $buildlog 2>&1
$MAKE install VERBOSE=1 >> $buildlog 2>&1
if [ $? -ne 0 ];then
return -2
fi
cd $OLDPWD
}
prepare() {
# 需要linux 安装automake, autoconf(2.71以上),libtool, libltdl7-dev
if [ $libtoolbuild == true ];then
buildgnutool libtool 2.4.6
if [ $? -ne 0 ];then
return -1
fi
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$prefixpath/lib
export LIBTOOL=$prefixpath/bin/libtool
export LIBTOOLIZE=$prefixpath/bin/libtoolize
export ACLOCAL_PATH=$prefixpath/share/aclocal
libtoolbuild=false
unset prefixpath
fi
if [ $autoconfbuild == true ];then
buildgnutool autoconf 2.71
if [ $? -ne 0 ];then
return -2
fi
export AUTOCONF=$prefixpath/bin/autoconf
export AUTORECONF=$prefixpath/bin/autoreconf
autoconfbuild=false
unset prefixpath
fi
mkdir $builddir/$ARCH-build
if [ $genconfigure == true ];then
cd $builddir
$AUTORECONF -v -i >> $buildlog 2>&1
if [ $? -ne 0 ];then
return -3
fi
genconfigure=false
# 恢复环境变量
export LD_LIBRARY_PATH=$oldlibpath
unset LIBTOOL LIBTOOLIZE ACLOCAL_PATH AUTOCONF AUTORECONF
cd $OLDPWD
fi
if [ $ARCH == "armeabi-v7a" ];then
setarm32ENV
host=arm-linux
cc=${OHOS_SDK}/native/llvm/bin/arm-linux-ohos-clang
# armv7a汇编指令需要使用fp registers, 否则汇编代码报错，无法编译
export CFLAGS="$CFLAGS -mfloat-abi=softfp"
elif [ $ARCH == "arm64-v8a" ];then
setarm64ENV
host=aarch64-linux
cc=${OHOS_SDK}/native/llvm/bin/aarch64-linux-ohos-clang
else
echo "$ARCH not support"
return -1
fi
prefixlibffi=${LYCIUM_ROOT}/usr/${pkgname}/${ARCH}
}
build() {
cd $builddir
PKG_CONFIG_LIBDIR="${pkgconfigpath}" ./configure "$@" \
--host=$host --enable-static=yes --disable-multi-os-directory \
--enable-builddir=$ARCH-build > $buildlog 2>&1
$MAKE -C $ARCH-build VERBOSE=1 >> $buildlog 2>&1
ret=$?
cd $OLDPWD
return $ret
}
package() {
cd $builddir
$MAKE -C $ARCH-build install VERBOSE=1 >> $buildlog 2>&1
cp $ARCH-build/fficonfig.h $prefixlibffi/include
cp include/ffi_common.h $prefixlibffi/include
ret=$?
cd $OLDPWD
return $ret
}
check() {
rootdir=$(pwd)
cd $builddir/testsuite
testsuitedir=$(pwd)
for filedir in $(ls)
do
if [ -d $testsuitedir/$filedir ];then
cd $testsuitedir/$filedir
for file in $(ls $testsuitedir/$filedir)
do
filesuffixname=${file##*.}
filename=${file%.*}
if [ "$filesuffixname" == "c" ];then
if [[ "$filedir" == "libffi.closures" || "$filedir" == "libffi.complex" || "$filedir" == "libffi.go" ]];then
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O0 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O0
fi
${cc} -I/${prefixlibffi}/include -W -Wall -O0 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib \
-o $filename $file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -1
fi
mv $filename $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O0
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O2 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O2
fi
${cc} -I/${prefixlibffi}/include -W -Wall -O2 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib \
-o $filename $file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -2
fi
mv $filename $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O2
fi
if [ "$filedir" == "libffi.call" ];then
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O0 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O0
fi
${cc} -I/${prefixlibffi}/include -W -Wall -O0 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib \
-o $filename $file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -3
fi
mv $filename $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O0
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O2 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O2
fi
${cc} -I/${prefixlibffi}/include -W -Wall -O2 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib \
-o $filename $file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -4
fi
mv $filename $rootdir/$builddir/$ARCH-build/testsuite/$filedir/O2
fi
if [ "$filedir" == "libffi.bhaible" ];then
if [ "$filename" == "test-call" ];then
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-call-O0 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-call-O0
fi
for i in {1..81}
do
${cc} -I/${prefixlibffi}/include -W -Wall -DDGTEST=${i} -Wno-unused-variable -Wno-unused-parameter \
-Wno-uninitialized -O0 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib -o $filename"-O0"${i} \
$file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -5
fi
mv $filename"-O0"${i} $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-call-O0
done
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-call-O2 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-call-O2
fi
for i in {1..81}
do
${cc} -I/${prefixlibffi}/include -W -Wall -DDGTEST=${i} -Wno-unused-variable -Wno-unused-parameter \
-Wno-uninitialized -O2 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib -o $filename"-O2"${i} \
$file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -6
fi
mv $filename"-O2"${i} $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-call-O2
done
fi
if [ "$filename" == "test-callback" ];then
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-callback-O0 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-callback-O0
fi
for i in {1..80}
do
${cc} -I/${prefixlibffi}/include -W -Wall -DDGTEST=${i} -Wno-unused-variable -Wno-unused-parameter \
-Wno-uninitialized -O0 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib -o $filename"-O0"${i} \
$file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -7
fi
mv $filename"-O0"${i} $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-callback-O0
done
if [ ! -d $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-callback-O2 ];then
mkdir -p $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-callback-O2
fi
for i in {1..80}
do
${cc} -I/${prefixlibffi}/include -W -Wall -DDGTEST=${i} -Wno-unused-variable -Wno-unused-parameter \
-Wno-uninitialized -O2 -L/${prefixlibffi}/lib -Wl,-rpath,/${prefixlibffi}/lib -o $filename"-O2"${i} \
$file -lffi >> $rootdir/$builddir/$ARCH-build/build.log 2>&1
if [ $? -ne 0 ];then
return -8
fi
mv $filename"-O2"${i} $rootdir/$builddir/$ARCH-build/testsuite/$filedir/test-callback-O2
done
fi
fi
fi
done
fi
done
cd $rootdir
echo "The test must be on an OpenHarmony device!"
#执行可执行程序运行测试
}
recoverpkgbuildenv(){
unset host cc prefixlibffi
if [ $ARCH == "armeabi-v7a" ];then
unsetarm32ENV
elif [ $ARCH == "arm64-v8a" ];then
unsetarm64ENV
else
echo "$ARCH not support"
return -1
fi
}
# 清理环境
cleanbuild(){
rm -rf ${PWD}/$builddir #${PWD}/$packagename
}
