* Copyright (c) 2020-2023 Huawei Device Co., Ltd.
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
* @file
* @kit ArkUI
*/
* Defines the animator options.
* @interface AnimatorOptions
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Defines the animator options.
* @interface AnimatorOptions
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Defines the animator options.
* @interface AnimatorOptions
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
export interface AnimatorOptions {
* Duration of the animation, in milliseconds.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Duration of the animation, in milliseconds.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Duration of the animation, in milliseconds.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
duration: number;
* Time curve of the animation. For details about the supported types.
* linear The animation speed keeps unchanged.
* ease The animation starts and ends at a low speed, cubic-bezier(0.25, 0.1, 0.25, 1.0).
* ease-in The animation starts at a low speed, cubic-bezier(0.42, 0.0, 1.0, 1.0).
* ease-out The animation ends at a low speed, cubic-bezier(0.0, 0.0, 0.58, 1.0).
* ease-in-out The animation starts and ends at a low speed, cubic-bezier(0.42, 0.0, 0.58, 1.0).
* fast-out-slow-in Standard curve, cubic-bezier(0.4, 0.0, 0.2, 1.0).
* linear-out-slow-in Deceleration curve, cubic-bezier(0.0, 0.0, 0.2, 1.0).
* fast-out-linear-in Acceleration curve, cubic-bezier(0.4, 0.0, 1.0, 1.0).
* friction Damping curve, cubic-bezier(0.2, 0.0, 0.2, 1.0).
* extreme-deceleration Extreme deceleration curve, cubic-bezier(0.0, 0.0, 0.0, 1.0).
* sharp Sharp curve, cubic-bezier(0.33, 0.0, 0.67, 1.0).
* rhythm Rhythm curve, cubic-bezier(0.7, 0.0, 0.2, 1.0).
* smooth Smooth curve, cubic-bezier(0.4, 0.0, 0.4, 1.0).
* cubic-bezier(x1, y1, x2, y2) You can customize an animation speed curve in the cubic-bezier() function. The x and y values of each input parameter must be between 0 and 1.
* Step curve. The number must be set and only an integer is supported, step-position is optional. It can be set to start or end. The default value is end.
* The default value is ease.
* @type {string}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Time curve of the animation. For details about the supported types.
* linear The animation speed keeps unchanged.
* ease The animation starts and ends at a low speed, cubic-bezier(0.25, 0.1, 0.25, 1.0).
* ease-in The animation starts at a low speed, cubic-bezier(0.42, 0.0, 1.0, 1.0).
* ease-out The animation ends at a low speed, cubic-bezier(0.0, 0.0, 0.58, 1.0).
* ease-in-out The animation starts and ends at a low speed, cubic-bezier(0.42, 0.0, 0.58, 1.0).
* fast-out-slow-in Standard curve, cubic-bezier(0.4, 0.0, 0.2, 1.0).
* linear-out-slow-in Deceleration curve, cubic-bezier(0.0, 0.0, 0.2, 1.0).
* fast-out-linear-in Acceleration curve, cubic-bezier(0.4, 0.0, 1.0, 1.0).
* friction Damping curve, cubic-bezier(0.2, 0.0, 0.2, 1.0).
* extreme-deceleration Extreme deceleration curve, cubic-bezier(0.0, 0.0, 0.0, 1.0).
* sharp Sharp curve, cubic-bezier(0.33, 0.0, 0.67, 1.0).
* rhythm Rhythm curve, cubic-bezier(0.7, 0.0, 0.2, 1.0).
* smooth Smooth curve, cubic-bezier(0.4, 0.0, 0.4, 1.0).
* cubic-bezier(x1, y1, x2, y2) You can customize an animation speed curve in the cubic-bezier() function. The x and y values of each input parameter must be between 0 and 1.
* Step curve. The number must be set and only an integer is supported, step-position is optional. It can be set to start or end. The default value is end.
* The default value is ease.
* @type {string}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Time curve of the animation. For details about the supported types.
* linear The animation speed keeps unchanged.
* ease The animation starts and ends at a low speed, cubic-bezier(0.25, 0.1, 0.25, 1.0).
* ease-in The animation starts at a low speed, cubic-bezier(0.42, 0.0, 1.0, 1.0).
* ease-out The animation ends at a low speed, cubic-bezier(0.0, 0.0, 0.58, 1.0).
* ease-in-out The animation starts and ends at a low speed, cubic-bezier(0.42, 0.0, 0.58, 1.0).
* fast-out-slow-in Standard curve, cubic-bezier(0.4, 0.0, 0.2, 1.0).
* linear-out-slow-in Deceleration curve, cubic-bezier(0.0, 0.0, 0.2, 1.0).
* fast-out-linear-in Acceleration curve, cubic-bezier(0.4, 0.0, 1.0, 1.0).
* friction Damping curve, cubic-bezier(0.2, 0.0, 0.2, 1.0).
* extreme-deceleration Extreme deceleration curve, cubic-bezier(0.0, 0.0, 0.0, 1.0).
* sharp Sharp curve, cubic-bezier(0.33, 0.0, 0.67, 1.0).
* rhythm Rhythm curve, cubic-bezier(0.7, 0.0, 0.2, 1.0).
* smooth Smooth curve, cubic-bezier(0.4, 0.0, 0.4, 1.0).
* cubic-bezier(x1, y1, x2, y2) You can customize an animation speed curve in the cubic-bezier() function. The x and y values of each input parameter must be between 0 and 1.
* Step curve. The number must be set and only an integer is supported, step-position is optional. It can be set to start or end. The default value is end.
* interpolating-spring(velocity, mass, stiffness, damping), interpolating spring curve.
* The default value is ease.
* @type {string}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
easing: string;
* Delay for the animation start. The default value indicates no delay.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Delay for the animation start. The default value indicates no delay.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Delay for the animation start. The default value indicates no delay.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
delay: number;
* Whether to resume to the initial state after the animation is executed.
* none: The initial state is restored after the animation is executed.
* forwards: The state at the end of the animation (defined in the last key frame) is retained after the animation is executed.
* @type {"none" | "forwards" | "backwards" | "both"}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Whether to resume to the initial state after the animation is executed.
* none: The initial state is restored after the animation is executed.
* forwards: The state at the end of the animation (defined in the last key frame) is retained after the animation is executed.
* @type {"none" | "forwards" | "backwards" | "both"}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Whether to resume to the initial state after the animation is executed.
* none: The initial state is restored after the animation is executed.
* forwards: The state at the end of the animation (defined in the last key frame) is retained after the animation is executed.
* @type {"none" | "forwards" | "backwards" | "both"}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
fill: "none" | "forwards" | "backwards" | "both";
* The animation playback mode.
* The default value is "normal".
* @type {"normal" | "reverse" | "alternate" | "alternate-reverse"}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* The animation playback mode.
* The default value is "normal".
* @type {"normal" | "reverse" | "alternate" | "alternate-reverse"}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* The animation playback mode.
* The default value is "normal".
* @type {"normal" | "reverse" | "alternate" | "alternate-reverse"}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
direction: "normal" | "reverse" | "alternate" | "alternate-reverse";
* Number of times the animation will be played. number indicates a fixed number of playback operations, and -1 an unlimited number of playback operations.
* The default value is 1.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Number of times the animation will be played. number indicates a fixed number of playback operations, and -1 an unlimited number of playback operations.
* The default value is 1.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Number of times the animation will be played. number indicates a fixed number of playback operations, and -1 an unlimited number of playback operations.
* The default value is 1.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
iterations: number;
* Starting point of animator interpolation.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Starting point of animator interpolation.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Starting point of animator interpolation.
* The default value is 0.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
begin: number;
* Ending point of Dynamic Interpolation
* The default value is 1.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Ending point of Dynamic Interpolation
* The default value is 1.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Ending point of Dynamic Interpolation
* The default value is 1.
* @type {number}
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
end: number;
}
* Defines the SimpleAnimatorOptions class.
*
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
export declare class SimpleAnimatorOptions {
* constructor.
*
* @param { number } begin - Starting point of animator interpolation.
* @param { number } end - Ending point of animator interpolation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
constructor(begin: number, end: number);
* Set duration of the animation, in milliseconds.
*
* @param { number } duration - if not set, default is 1000.
* @returns { SimpleAnimatorOptions }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
duration(duration: number): SimpleAnimatorOptions;
* Set time curve of the animation. For details about the supported types.
* linear The animation speed keeps unchanged.
* ease The animation starts and ends at a low speed, cubic-bezier(0.25, 0.1, 0.25, 1.0).
* ease-in The animation starts at a low speed, cubic-bezier(0.42, 0.0, 1.0, 1.0).
* ease-out The animation ends at a low speed, cubic-bezier(0.0, 0.0, 0.58, 1.0).
* ease-in-out The animation starts and ends at a low speed, cubic-bezier(0.42, 0.0, 0.58, 1.0).
* fast-out-slow-in Standard curve, cubic-bezier(0.4, 0.0, 0.2, 1.0).
* linear-out-slow-in Deceleration curve, cubic-bezier(0.0, 0.0, 0.2, 1.0).
* fast-out-linear-in Acceleration curve, cubic-bezier(0.4, 0.0, 1.0, 1.0).
* friction Damping curve, cubic-bezier(0.2, 0.0, 0.2, 1.0).
* extreme-deceleration Extreme deceleration curve, cubic-bezier(0.0, 0.0, 0.0, 1.0).
* sharp Sharp curve, cubic-bezier(0.33, 0.0, 0.67, 1.0).
* rhythm Rhythm curve, cubic-bezier(0.7, 0.0, 0.2, 1.0).
* smooth Smooth curve, cubic-bezier(0.4, 0.0, 0.4, 1.0).
* cubic-bezier(x1, y1, x2, y2) You can customize an animation speed curve in the cubic-bezier() function. The x and y values of each input parameter must be between 0 and 1.
* Step curve. The number must be set and only an integer is supported, step-position is optional. It can be set to start or end. The default value is end.
* @param { string } curve - if not set, default is ease.
* @returns { SimpleAnimatorOptions }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
easing(curve: string): SimpleAnimatorOptions;
* Set delay for the animation start. The default value indicates no delay.
*
* @param { number } delay - if not set, default is 0.
* @returns { SimpleAnimatorOptions }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
delay(delay: number): SimpleAnimatorOptions;
* Set FillMode of animation. FillMode indicates whether to resume to the initial state after the animation is executed.
*
* @param { FillMode } fillMode - if not set, default is FillMode.Forwards.
* @returns { SimpleAnimatorOptions }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
fill(fillMode: FillMode): SimpleAnimatorOptions;
* Set the animation playback mode.
*
* @param { PlayMode } direction - if not set, default is PlayMode.Normal.
* @returns { SimpleAnimatorOptions }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
direction(direction: PlayMode): SimpleAnimatorOptions;
* Set number of times the animation will be played. number indicates a fixed number of playback operations, and -1 an unlimited number of playback operations.
*
* @param { number } iterations - if not set, default is 1.
* @returns { SimpleAnimatorOptions }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
iterations(iterations: number): SimpleAnimatorOptions;
}
* Defines the Animator result interface.
* @interface AnimatorResult
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Defines the Animator result interface.
* @interface AnimatorResult
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Defines the Animator result interface.
* @interface AnimatorResult
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
export interface AnimatorResult {
* Update the options for current animator.
* @param { AnimatorOptions } options - Options.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6 dynamiconly
* @deprecated since 9
* @useinstead ohos.animator.reset
*/
update(options: AnimatorOptions): void;
* Reset the options for current animator.
* @param { AnimatorOptions } options - Options.
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @throws { BusinessError } 100001 - The specified page is not found or the object property list is not obtained.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 9
*/
* Reset the options for current animator.
* @param { AnimatorOptions } options - Options.
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @throws { BusinessError } 100001 - The specified page is not found or the object property list is not obtained.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Reset the options for current animator.
* @param { AnimatorOptions } options - Options.
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @throws { BusinessError } 100001 - The specified page is not found or the object property list is not obtained.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
reset(options: AnimatorOptions): void;
* Reset the options for current animator.
* @param { AnimatorOptions | SimpleAnimatorOptions } options - Options.
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @throws { BusinessError } 100001 - The specified page is not found or the object property list is not obtained.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
reset(options: AnimatorOptions | SimpleAnimatorOptions): void;
* Starts the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Starts the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Starts the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
play(): void;
* Ends the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Ends the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Ends the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
finish(): void;
* Pauses the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Pauses the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Pauses the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
pause(): void;
* Cancels the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Cancels the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Cancels the animation.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
cancel(): void;
* Plays the animation in reverse direction.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Plays the animation in reverse direction.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Plays the animation in reverse direction.
* Invalid when using interpolating-spring curve.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
reverse(): void;
* Trigger when vsync callback.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Trigger when vsync callback.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Trigger when vsync callback.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamiconly
* @deprecated since 12
* @useinstead ohos.animator.onFrame
*/
onframe: (progress: number) => void;
* Trigger when vSync callback.
*
* @type { function }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 12 dynamic
*/
onFrame: (progress: number) => void;
* The animation is finished.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* The animation is finished.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* The animation is finished.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamiconly
* @deprecated since 12
* @useinstead ohos.animator.onFinish
*/
onfinish: () => void;
* The animation is finished.
*
* @type { function }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 12 dynamic
*/
onFinish: () => void;
* The animation is canceled.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* The animation is canceled.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* The animation is canceled.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamiconly
* @deprecated since 12
* @useinstead ohos.animator.onCancel
*/
oncancel: () => void;
* The animation is canceled.
*
* @type { function }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 12 dynamic
*/
onCancel: () => void;
* The animation is repeated.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* The animation is repeated.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* The animation is repeated.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamiconly
* @deprecated since 12
* @useinstead ohos.animator.onRepeat
*/
onrepeat: () => void;
* The animation is repeated.
*
* @type { function }
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 12 dynamic
*/
onRepeat: () => void;
* The expected frame rate of dynamical of rate range.
* @param { ExpectedFrameRateRange } rateRange - Indicates ExpectedFrameRateRange.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @atomicservice
* @since 12 dynamic
*/
setExpectedFrameRateRange(rateRange: ExpectedFrameRateRange): void;
}
* Defines the Animator class.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6
*/
* Defines the Animator class.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Defines the Animator class.
*
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamic
*/
export default class Animator {
* Create an animator object for custom animation.
* @param { AnimatorOptions } options - Options.
* @returns { AnimatorResult } animator result
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 6 dynamiconly
* @deprecated since 9
* @useinstead ohos.animator.create
*/
static createAnimator(options: AnimatorOptions): AnimatorResult;
* Create an animator object for custom animation.
* @param { AnimatorOptions } options - Options.
* @returns { AnimatorResult } animator result
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @since 9
*/
* Create an animator object for custom animation.
* @param { AnimatorOptions } options - Options.
* @returns { AnimatorResult } animator result
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @since 10
*/
* Create an animator object for custom animation.
* @param { AnimatorOptions } options - Options.
* @returns { AnimatorResult } animator result
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @crossplatform
* @atomicservice
* @since 11 dynamiconly
* @deprecated since 18
* @useinstead ohos.arkui.UIContext.UIContext#createAnimator
*/
static create(options: AnimatorOptions): AnimatorResult;
* Create an animator object for custom animation.
* This interface depends on the UI context and cannot be used when the UI context is unclear. It is recommended to
* use {@link ohos.arkui.UIContext.UIContext#createAnimator}.
*
* @param { AnimatorOptions | SimpleAnimatorOptions } options - Options.
* @returns { AnimatorResult } - animator result
* @throws { BusinessError } 401 - Parameter error. Possible causes:
* <br> 1. Mandatory parameters are left unspecified.
* <br> 2. Incorrect parameters types.
* <br> 3. Parameter verification failed.
* @syscap SystemCapability.ArkUI.ArkUI.Full
* @stagemodelonly
* @crossplatform
* @atomicservice
* @since 18 dynamic
*/
static create(options: AnimatorOptions | SimpleAnimatorOptions): AnimatorResult;
}
