| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES stable inclusion from stable-6.6.94 commit 99d4011a0a322e3eb0a7828630145311b8a0b58e category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit 59529bbe642de4eb2191a541d9b4bae7eb73862e ] SDEI usually initialize with the ACPI table, but on platforms where ACPI is not used, the SDEI feature can still be used to handle specific firmware calls or other customized purposes. Therefore, it is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES. In commit dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in acpi_init()"), to make APEI ready earlier, sdei_init was moved into acpi_ghes_init instead of being a standalone initcall, adding ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the flexibility and usability of SDEI. This patch corrects the dependency in Kconfig and splits sdei_init() into two separate functions: sdei_init() and acpi_sdei_init(). sdei_init() will be called by arch_initcall and will only initialize the platform driver, while acpi_sdei_init() will initialize the device from acpi_ghes_init() when ACPI is ready. This allows the initialization of SDEI without ACPI_APEI_GHES enabled. Fixes: dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()") Cc: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com> Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
ACPI: APEI: Remove a useless include This file does not use rcu, so there is no point in including <linux/rculist.h>. So just remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 3 年前 | |
efi: fix missing prototype warnings The cper.c file needs to include an extra header, and efi_zboot_entry needs an extern declaration to avoid these 'make W=1' warnings: drivers/firmware/efi/libstub/zboot.c:65:1: error: no previous prototype for 'efi_zboot_entry' [-Werror=missing-prototypes] drivers/firmware/efi/efi.c:176:16: error: no previous prototype for 'efi_attr_is_visible' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:626:6: error: no previous prototype for 'cper_estatus_print' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:649:5: error: no previous prototype for 'cper_estatus_check_header' [-Werror=missing-prototypes] drivers/firmware/efi/cper.c:662:5: error: no previous prototype for 'cper_estatus_check' [-Werror=missing-prototypes] To make this easier, move the cper specific declarations to include/linux/cper.h. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> | 3 年前 | |
ACPI: APEI: mark bert_disable as __initdata It's only used inside the __init section. Mark it __initdata. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 3 年前 | |
ACPI: APEI: EINJ: warn on invalid argument when explicitly indicated by platform OSPM executes an EXECUTE_OPERATION action to instruct the platform to begin the injection operation, then executes a GET_COMMAND_STATUS action to determine the status of the completed operation. The ACPI Specification documented error codes[1] are: 0 = Success (Linux #define EINJ_STATUS_SUCCESS) 1 = Unknown failure (Linux #define EINJ_STATUS_FAIL) 2 = Invalid Access (Linux #define EINJ_STATUS_INVAL) The original code report -EBUSY for both "Unknown Failure" and "Invalid Access" cases. Actually, firmware could do some platform dependent sanity checks and returns different error codes, e.g. "Invalid Access" to indicate to the user that the parameters they supplied cannot be used for injection. To this end, fix to return -EINVAL in the __einj_error_inject() error handling case instead of always -EBUSY, when explicitly indicated by the platform in the status of the completed operation. [1] ACPI Specification 6.5 18.6.1. Error Injection Table Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 3 年前 | |
ACPI: APEI: Fix missing ERST record id Read a record is cleared by others, but the deleted record cache entry is still created by erst_get_record_id_next. When next enumerate the records, get the cached deleted record, then erst_read() return -ENOENT and try to get next record, loop back to first ID will return 0 in function __erst_record_id_cache_add_one and then set record_id as APEI_ERST_INVALID_RECORD_ID, finished this time read operation. It will result in read the records just in the cache hereafter. This patch cleared the deleted record cache, fix the issue that "./erst-inject -p" shows record counts not equal to "./erst-inject -n". A reproducer of the problem(retry many times): [root@localhost erst-inject]# ./erst-inject -c 0xaaaaa00011 [root@localhost erst-inject]# ./erst-inject -p rc: 273 rcd sig: CPER rcd id: 0xaaaaa00012 rc: 273 rcd sig: CPER rcd id: 0xaaaaa00013 rc: 273 rcd sig: CPER rcd id: 0xaaaaa00014 [root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000006 [root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000007 [root@localhost erst-inject]# ./erst-inject -i 0xaaaaa000008 [root@localhost erst-inject]# ./erst-inject -p rc: 273 rcd sig: CPER rcd id: 0xaaaaa00012 rc: 273 rcd sig: CPER rcd id: 0xaaaaa00013 rc: 273 rcd sig: CPER rcd id: 0xaaaaa00014 [root@localhost erst-inject]# ./erst-inject -n total error record count: 6 Signed-off-by: Liu Xinpeng <liuxp11@chinatelecom.cn> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 4 年前 | |
ACPI: APEI: Remove unneeded result variables Return the erst_get_record_id_begin() and apei_exec_write_register() return values directly instead of storing them in redundant local variables. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 3 年前 | |
firmware: SDEI: Allow sdei initialization without ACPI_APEI_GHES stable inclusion from stable-6.6.94 commit 99d4011a0a322e3eb0a7828630145311b8a0b58e category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit 59529bbe642de4eb2191a541d9b4bae7eb73862e ] SDEI usually initialize with the ACPI table, but on platforms where ACPI is not used, the SDEI feature can still be used to handle specific firmware calls or other customized purposes. Therefore, it is not necessary for ARM_SDE_INTERFACE to depend on ACPI_APEI_GHES. In commit dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in acpi_init()"), to make APEI ready earlier, sdei_init was moved into acpi_ghes_init instead of being a standalone initcall, adding ACPI_APEI_GHES dependency to ARM_SDE_INTERFACE. This restricts the flexibility and usability of SDEI. This patch corrects the dependency in Kconfig and splits sdei_init() into two separate functions: sdei_init() and acpi_sdei_init(). sdei_init() will be called by arch_initcall and will only initialize the platform driver, while acpi_sdei_init() will initialize the device from acpi_ghes_init() when ACPI is ready. This allows the initialization of SDEI without ACPI_APEI_GHES enabled. Fixes: dc4e8c07e9e2 ("ACPI: APEI: explicit init of HEST and GHES in apci_init()") Cc: Shuai Xue <xueshuai@linux.alibaba.com> Signed-off-by: Huang Yiwei <quic_hyiwei@quicinc.com> Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20250507045757.2658795-1-quic_hyiwei@quicinc.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
ACPI: APEI: fix return value of __setup handlers __setup() handlers should return 1 to indicate that the boot option has been handled. Returning 0 causes a boot option to be listed in the Unknown kernel command line parameters and also added to init's arg list (if no '=' sign) or environment list (if of the form 'a=b'). Unknown kernel command line parameters "erst_disable bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init erst_disable bert_disable hest_disable with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 4 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 1 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 4 年前 |