| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
x86/hyperv: Use per cpu initial stack for vtl context stable inclusion from stable-6.6.23 commit 3d6af30f177f8c3417437ca963992075f6c18bec category: bugfix issue: #IAJS6M CVE: NA Signed-off-by: yaowenrui <yaowenrui2@huawei.com> --------------------------------------- [ Upstream commit 2b4b90e053a29057fb05ba81acce26bddce8d404 ] Currently, the secondary CPUs in Hyper-V VTL context lack support for parallel startup. Therefore, relying on the single initial_stack fetched from the current task structure suffices for all vCPUs. However, common initial_stack risks stack corruption when parallel startup is enabled. In order to facilitate parallel startup, use the initial_stack from the per CPU idle thread instead of the current task. Fixes: 3be1bc2fe9d2 ("x86/hyperv: VTL support for Hyper-V") Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1709452896-13342-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1709452896-13342-1-git-send-email-ssengar@linux.microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: yaowenrui <yaowenrui2@huawei.com> | 2 年前 | |
Drivers: hv: Move Hyper-V extended capability check to arch neutral code The extended capability query code is currently under arch/x86, but it is architecture neutral, and is used by arch neutral code in the Hyper-V balloon driver. Hence the balloon driver fails to build on other architectures. Fix by moving the ext cap code out from arch/x86. Because it is also called from built-in architecture specific code, it can't be in a module, so the Makefile treats as built-in even when CONFIG_HYPERV is "m". Also drivers/Makefile is tweaked because this is the first occurrence of a Hyper-V file that is built-in even when CONFIG_HYPERV is "m". While here, update the hypercall status check to use the new helper function instead of open coding. No functional change. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Sunil Muthuswamy <sunilmut@microsoft.com> Link: https://lore.kernel.org/r/1622669804-2016-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> | 5 年前 | |
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer() stable inclusion from stable-6.6.92 commit 6d2d375205455231c721ee5f623eb673ff1c7e7c category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit 45a442fe369e6c4e0b4aa9f63b31c3f2f9e2090e upstream. With the netvsc driver changed to use vmbus_sendpacket_mpb_desc() instead of vmbus_sendpacket_pagebuffer(), the latter has no remaining callers. Remove it. Cc: <stable@vger.kernel.org> # 6.1.x Signed-off-by: Michael Kelley <mhklinux@outlook.com> Link: https://patch.msgid.link/20250513000604.1396-6-mhklinux@outlook.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
Drivers: hv: vmbus: Add utility function for querying ring size stable inclusion from stable-6.6.96 commit ebba6cc0781c00566ab7a11d9307cd093a787881 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit e8c4bd6c6e6b7e7b416c42806981c2a81370001e ] Add a function to query for the preferred ring buffer size of VMBus device. This will allow the drivers (eg. UIO) to allocate the most optimized ring buffer size for devices. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://lore.kernel.org/r/1711788723-8593-2-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 0315fef2aff9 ("uio_hv_generic: Align ring size to system page") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
Drivers: hv: Allocate interrupt and monitor pages aligned to system page boundary stable inclusion from stable-6.6.95 commit 6f824cdd8209cddca06d1667c1ff467f2bf5a759 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit 09eea7ad0b8e973dcf5ed49902838e5d68177f8e upstream. There are use cases that interrupt and monitor pages are mapped to user-mode through UIO, so they need to be system page aligned. Some Hyper-V allocation APIs introduced earlier broke those requirements. Fix this by using page allocation functions directly for interrupt and monitor pages. Cc: stable@vger.kernel.org Fixes: ca48739e59df ("Drivers: hv: vmbus: Move Hyper-V page allocator to arch neutral code") Signed-off-by: Long Li <longli@microsoft.com> Reviewed-by: Michael Kelley <mhklinux@outlook.com> Link: https://lore.kernel.org/r/1746492997-4599-2-git-send-email-longli@linuxonhyperv.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <1746492997-4599-2-git-send-email-longli@linuxonhyperv.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
x86/hyperv: Remove hv_isolation_type_en_snp In ms_hyperv_init_platform(), do not distinguish between a SNP VM with the paravisor and a SNP VM without the paravisor. Replace hv_isolation_type_en_snp() with !ms_hyperv.paravisor_present && hv_isolation_type_snp(). The hv_isolation_type_en_snp() in drivers/hv/hv.c and drivers/hv/hv_common.c can be changed to hv_isolation_type_snp() since we know !ms_hyperv.paravisor_present is true there. Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <tiala@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20230824080712.30327-10-decui@microsoft.com | 2 年前 | |
Merge tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Support for SEV-SNP guests on Hyper-V (Tianyu Lan) - Support for TDX guests on Hyper-V (Dexuan Cui) - Use SBRM API in Hyper-V balloon driver (Mitchell Levy) - Avoid dereferencing ACPI root object handle in VMBus driver (Maciej Szmigiero) - A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh Sengar) * tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits) x86/hyperv: Remove duplicate include x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's x86/hyperv: Remove hv_isolation_type_en_snp x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor x86/hyperv: Introduce a global variable hyperv_paravisor_present Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests Drivers: hv: vmbus: Support fully enlightened TDX guests x86/hyperv: Support hypercalls for fully enlightened TDX guests x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub hv: hyperv.h: Replace one-element array with flexible-array member Drivers: hv: vmbus: Don't dereference ACPI root object handle x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES x86/hyperv: Add smp support for SEV-SNP guest clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest ... | 2 年前 | |
Merge tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv updates from Wei Liu: - Support for SEV-SNP guests on Hyper-V (Tianyu Lan) - Support for TDX guests on Hyper-V (Dexuan Cui) - Use SBRM API in Hyper-V balloon driver (Mitchell Levy) - Avoid dereferencing ACPI root object handle in VMBus driver (Maciej Szmigiero) - A few misecllaneous fixes (Jiapeng Chong, Nathan Chancellor, Saurabh Sengar) * tag 'hyperv-next-signed-20230902' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (24 commits) x86/hyperv: Remove duplicate include x86/hyperv: Move the code in ivm.c around to avoid unnecessary ifdef's x86/hyperv: Remove hv_isolation_type_en_snp x86/hyperv: Use TDX GHCI to access some MSRs in a TDX VM with the paravisor Drivers: hv: vmbus: Bring the post_msg_page back for TDX VMs with the paravisor x86/hyperv: Introduce a global variable hyperv_paravisor_present Drivers: hv: vmbus: Support >64 VPs for a fully enlightened TDX/SNP VM x86/hyperv: Fix serial console interrupts for fully enlightened TDX guests Drivers: hv: vmbus: Support fully enlightened TDX guests x86/hyperv: Support hypercalls for fully enlightened TDX guests x86/hyperv: Add hv_isolation_type_tdx() to detect TDX guests x86/hyperv: Fix undefined reference to isolation_type_en_snp without CONFIG_HYPERV x86/hyperv: Add missing 'inline' to hv_snp_boot_ap() stub hv: hyperv.h: Replace one-element array with flexible-array member Drivers: hv: vmbus: Don't dereference ACPI root object handle x86/hyperv: Add hyperv-specific handling for VMMCALL under SEV-ES x86/hyperv: Add smp support for SEV-SNP guest clocksource: hyper-v: Mark hyperv tsc page unencrypted in sev-snp enlightened guest x86/hyperv: Use vmmcall to implement Hyper-V hypercall in sev-snp enlightened guest drivers: hv: Mark percpu hvcall input arg page unencrypted in SEV-SNP enlightened guest ... | 2 年前 | |
hv_debugfs: Make hv_debug_root static Fix sparse warning: drivers/hv/hv_debugfs.c:14:15: warning: symbol 'hv_debug_root' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20200403082845.22740-1-yuehaibing@huawei.com Signed-off-by: Wei Liu <wei.liu@kernel.org> | 6 年前 | |
Drivers: hv: remove duplicate word in a comment Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Link: https://lore.kernel.org/r/20220904154808.26022-1-dengshaomin@cdjrlc.com Signed-off-by: Wei Liu <wei.liu@kernel.org> | 3 年前 | |
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet stable inclusion from stable-6.6.68 commit 89fcec5e466b3ac9b376e0d621c71effa1a7983f category: bugfix issue: #IBE7K0 CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- commit 07a756a49f4b4290b49ea46e089cbe6f79ff8d26 upstream. If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening. Reported-by: Dexuan Cui <decui@microsoft.com> Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20241106154247.2271-3-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 | |
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet stable inclusion from stable-6.6.68 commit 89fcec5e466b3ac9b376e0d621c71effa1a7983f category: bugfix issue: #IBE7K0 CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- commit 07a756a49f4b4290b49ea46e089cbe6f79ff8d26 upstream. If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening. Reported-by: Dexuan Cui <decui@microsoft.com> Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20241106154247.2271-3-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 | |
hv: add SPDX license to trace Missing license on Hyper-V VMBUS tracing files. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
Drivers: hv: vmbus: Drivers: hv: vmbus: Introduce CHANNELMSG_MODIFYCHANNEL_RESPONSE Introduce the CHANNELMSG_MODIFYCHANNEL_RESPONSE message type, and code to receive and process such a message. Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210416143449.16185-3-parri.andrea@gmail.com Signed-off-by: Wei Liu <wei.liu@kernel.org> | 5 年前 | |
hv_balloon: trace post_status Hyper-V balloon driver makes non-trivial calculations to convert Linux's representation of free/used memory to what Hyper-V host expects to see. Add a tracepoint to see what's being sent and where the data comes from. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
Drivers: hv: util: Avoid accessing a ringbuffer not initialized yet stable inclusion from stable-6.6.68 commit 89fcec5e466b3ac9b376e0d621c71effa1a7983f category: bugfix issue: #IBE7K0 CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- commit 07a756a49f4b4290b49ea46e089cbe6f79ff8d26 upstream. If the KVP (or VSS) daemon starts before the VMBus channel's ringbuffer is fully initialized, we can hit the panic below: hv_utils: Registering HyperV Utility Driver hv_vmbus: registering driver hv_utils ... BUG: kernel NULL pointer dereference, address: 0000000000000000 CPU: 44 UID: 0 PID: 2552 Comm: hv_kvp_daemon Tainted: G E 6.11.0-rc3+ #1 RIP: 0010:hv_pkt_iter_first+0x12/0xd0 Call Trace: ... vmbus_recvpacket hv_kvp_onchannelcallback vmbus_on_event tasklet_action_common tasklet_action handle_softirqs irq_exit_rcu sysvec_hyperv_stimer0 </IRQ> <TASK> asm_sysvec_hyperv_stimer0 ... kvp_register_done hvt_op_read vfs_read ksys_read __x64_sys_read This can happen because the KVP/VSS channel callback can be invoked even before the channel is fully opened: 1) as soon as hv_kvp_init() -> hvutil_transport_init() creates /dev/vmbus/hv_kvp, the kvp daemon can open the device file immediately and register itself to the driver by writing a message KVP_OP_REGISTER1 to the file (which is handled by kvp_on_msg() ->kvp_handle_handshake()) and reading the file for the driver's response, which is handled by hvt_op_read(), which calls hvt->on_read(), i.e. kvp_register_done(). 2) the problem with kvp_register_done() is that it can cause the channel callback to be called even before the channel is fully opened, and when the channel callback is starting to run, util_probe()-> vmbus_open() may have not initialized the ringbuffer yet, so the callback can hit the panic of NULL pointer dereference. To reproduce the panic consistently, we can add a "ssleep(10)" for KVP in __vmbus_open(), just before the first hv_ringbuffer_init(), and then we unload and reload the driver hv_utils, and run the daemon manually within the 10 seconds. Fix the panic by reordering the steps in util_probe() so the char dev entry used by the KVP or VSS daemon is not created until after vmbus_open() has completed. This reordering prevents the race condition from happening. Reported-by: Dexuan Cui <decui@microsoft.com> Fixes: e0fa3e5e7df6 ("Drivers: hv: utils: fix a race on userspace daemons registration") Cc: stable@vger.kernel.org Signed-off-by: Michael Kelley <mhklinux@outlook.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20241106154247.2271-3-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20241106154247.2271-3-mhklinux@outlook.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 | |
Drivers: hv: utils: Make use of the helper macro LIST_HEAD() Replace "struct list_head head = LIST_HEAD_INIT(head)" with "LIST_HEAD(head)" to simplify the code. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20220209032251.37362-1-cai.huoqing@linux.dev Signed-off-by: Wei Liu <wei.liu@kernel.org> | 4 年前 | |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 280 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose good title or non infringement see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.459653302@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
Drivers: hv: vmbus: Add utility function for querying ring size stable inclusion from stable-6.6.96 commit ebba6cc0781c00566ab7a11d9307cd093a787881 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit e8c4bd6c6e6b7e7b416c42806981c2a81370001e ] Add a function to query for the preferred ring buffer size of VMBus device. This will allow the drivers (eg. UIO) to allocate the most optimized ring buffer size for devices. Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Long Li <longli@microsoft.com> Link: https://lore.kernel.org/r/1711788723-8593-2-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 0315fef2aff9 ("uio_hv_generic: Align ring size to system page") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
Drivers: hv: vmbus: Remove second way of mapping ring buffers With changes to how Hyper-V guest VMs flip memory between private (encrypted) and shared (decrypted), it's no longer necessary to have separate code paths for mapping VMBus ring buffers for for normal VMs and for Confidential VMs. As such, remove the code path that uses vmap_pfn(), and set the protection flags argument to vmap() to account for the difference between normal and Confidential VMs. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Link: https://lore.kernel.org/r/1679838727-87310-10-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> | 3 年前 | |
Drivers: hv: vmbus: Don't release fb_mmio resource in vmbus_free_mmio() stable inclusion from stable-6.6.84 commit 466ae740f88cda3ba541e09eec1ae75b1a7793c9 category: bugfix issue: #IC1IVT CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- [ Upstream commit 73fe9073c0cc28056cb9de0c8a516dac070f1d1f ] The VMBus driver manages the MMIO space it owns via the hyperv_mmio resource tree. Because the synthetic video framebuffer portion of the MMIO space is initially setup by the Hyper-V host for each guest, the VMBus driver does an early reserve of that portion of MMIO space in the hyperv_mmio resource tree. It saves a pointer to that resource in fb_mmio. When a VMBus driver requests MMIO space and passes "true" for the "fb_overlap_ok" argument, the reserved framebuffer space is used if possible. In that case it's not necessary to do another request against the "shadow" hyperv_mmio resource tree because that resource was already requested in the early reserve steps. However, the vmbus_free_mmio() function currently does no special handling for the fb_mmio resource. When a framebuffer device is removed, or the driver is unbound, the current code for vmbus_free_mmio() releases the reserved resource, leaving fb_mmio pointing to memory that has been freed. If the same or another driver is subsequently bound to the device, vmbus_allocate_mmio() checks against fb_mmio, and potentially gets garbage. Furthermore a second unbind operation produces this "nonexistent resource" error because of the unbalanced behavior between vmbus_allocate_mmio() and vmbus_free_mmio(): [ 55.499643] resource: Trying to free nonexistent resource <0x00000000f0000000-0x00000000f07fffff> Fix this by adding logic to vmbus_free_mmio() to recognize when MMIO space in the fb_mmio reserved area would be released, and don't release it. This filtering ensures the fb_mmio resource always exists, and makes vmbus_free_mmio() more parallel with vmbus_allocate_mmio(). Fixes: be000f93e5d7 ("drivers:hv: Track allocations of children of hv_vmbus in private resource tree") Signed-off-by: Michael Kelley <mhklinux@outlook.com> Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com> Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com> Link: https://lore.kernel.org/r/20250310035208.275764-1-mhklinux@outlook.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Message-ID: <20250310035208.275764-1-mhklinux@outlook.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 2 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 1 年前 | ||
| 4 年前 | ||
| 7 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 1 年前 |