| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
usb: atm: cxacru: fix a flaw in existing endpoint checks stable inclusion from stable-6.6.83 commit a0475a885d69849b1ade38add6d64338dfa83a8f category: bugfix issue: #IC1IVT CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- commit c90aad369899a607cfbc002bebeafd51e31900cd upstream. Syzbot once again identified a flaw in usb endpoint checking, see [1]. This time the issue stems from a commit authored by me (2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()")). While using usb_find_common_endpoints() may usually be enough to discard devices with wrong endpoints, in this case one needs more than just finding and identifying the sufficient number of endpoints of correct types - one needs to check the endpoint's address as well. Since cxacru_bind() fills URBs with CXACRU_EP_CMD address in mind, switch the endpoint verification approach to usb_check_XXX_endpoints() instead to fix incomplete ep testing. [1] Syzbot report: usb 5-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 1378 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... RIP: 0010:usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: <TASK> cxacru_cm+0x3c8/0xe50 drivers/usb/atm/cxacru.c:649 cxacru_card_status drivers/usb/atm/cxacru.c:760 [inline] cxacru_bind+0xcf9/0x1150 drivers/usb/atm/cxacru.c:1223 usbatm_usb_probe+0x314/0x1d30 drivers/usb/atm/usbatm.c:1058 cxacru_usb_probe+0x184/0x220 drivers/usb/atm/cxacru.c:1377 usb_probe_interface+0x641/0xbb0 drivers/usb/core/driver.c:396 really_probe+0x2b9/0xad0 drivers/base/dd.c:658 __driver_probe_device+0x1a2/0x390 drivers/base/dd.c:800 driver_probe_device+0x50/0x430 drivers/base/dd.c:830 ... Reported-and-tested-by: syzbot+ccbbc229a024fa3e13b5@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ccbbc229a024fa3e13b5 Fixes: 2eabb655a968 ("usb: atm: cxacru: fix endpoint checking in cxacru_bind()") Cc: stable@kernel.org Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru> Link: https://lore.kernel.org/r/20250213122259.730772-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 | |
usb: c67x00-drv: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue mainline inclusion from mainline-6.6 commit 9ab9b0e5fcdac325f950fc8b6caa08a9e22a0db9 category: bugfix CVE: CVE-2026-31755 Signed-off-by: 姜小林 <jiangxiaolin11@huawei.com> Co-Authored-By: Agent ------------------------------- commit 7f6f127b9bc34bed35f56faf7ecb1561d6b39000 upstream. When the gadget endpoint is disabled or not yet configured, the ep->desc pointer can be NULL. This leads to a NULL pointer dereference when __cdns3_gadget_ep_queue() is called, causing a kernel crash. Add a check to return -ESHUTDOWN if ep->desc is NULL, which is the standard return code for unconfigured endpoints. This prevents potential crashes when ep_queue is called on endpoints that are not ready. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Cc: stable <stable@kernel.org> Signed-off-by: Yongchao Wu <yongchao.wu@autochips.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://patch.msgid.link/20260331000407.613298-1-yongchao.wu@autochips.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 个月前 | |
usb: chipidea: udc: disconnect/reconnect from host when do suspend/resume stable inclusion from stable-6.6.97 commit 937f49be49d6ee696eb5457c21ff89c135c9b5ae category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit 31a6afbe86e8e9deba9ab53876ec49eafc7fd901 upstream. Shawn and John reported a hang issue during system suspend as below: - USB gadget is enabled as Ethernet - There is data transfer over USB Ethernet (scp a big file between host and device) - Device is going in/out suspend (echo mem > /sys/power/state) The root cause is the USB device controller is suspended but the USB bus is still active which caused the USB host continues to transfer data with device and the device continues to queue USB requests (in this case, a delayed TCP ACK packet trigger the issue) after controller is suspended, however the USB controller clock is already gated off. Then if udc driver access registers after that point, the system will hang. The correct way to avoid such issue is to disconnect device from host when the USB bus is not at suspend state. Then the host will receive disconnect event and stop data transfer in time. To continue make USB gadget device work after system resume, this will reconnect device automatically. To make usb wakeup work if USB bus is already at suspend state, this will keep connection for it only when USB device controller has enabled wakeup capability. Reported-by: Shawn Guo <shawnguo@kernel.org> Reported-by: John Ernberg <john.ernberg@actia.se> Closes: https://lore.kernel.org/linux-usb/aEZxmlHmjeWcXiF3@dragon/ Tested-by: John Ernberg <john.ernberg@actia.se> # iMX8QXP Fixes: 235ffc17d014 ("usb: chipidea: udc: add suspend/resume support for device controller") Cc: stable <stable@kernel.org> Reviewed-by: Jun Li <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20250614124914.207540-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: cdc-wdm: avoid setting WDM_READ for ZLP-s stable inclusion from stable-6.6.96 commit 00626325dba74c24bf81dd95bd447fc09902a2f1 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit 387602d8a75574fafb451b7a8215e78dfd67ee63 ] Don't set WDM_READ flag in wdm_in_callback() for ZLP-s, otherwise when userspace tries to poll for available data, it might - incorrectly - believe there is something available, and when it tries to non-blocking read it, it might get stuck in the read loop. For example this is what glib does for non-blocking read (briefly): 1. poll() 2. if poll returns with non-zero, starts a read data loop: a. loop on poll() (EINTR disabled) b. if revents was set, reads data I. if read returns with EINTR or EAGAIN, goto 2.a. II. otherwise return with data So if ZLP sets WDM_READ (#1), we expect data, and try to read it (#2). But as that was a ZLP, and we are doing non-blocking read, wdm_read() returns with EAGAIN (#2.b.I), so loop again, and try to read again (#2.a.). With glib, we might stuck in this loop forever, as EINTR is disabled (#2.a). Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20250403144004.3889125-1-robert.hodaszi@digi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: ulpi: fix double free in ulpi_register_interface() error path commit 01af542392b5d41fd659d487015a71f627accce3 upstream. When device_register() fails, ulpi_register() calls put_device() on ulpi->dev. The device release callback ulpi_dev_release() drops the OF node reference and frees ulpi, but the current error path in ulpi_register_interface() then calls kfree(ulpi) again, causing a double free. Let put_device() handle the cleanup through ulpi_dev_release() and avoid freeing ulpi again in ulpi_register_interface(). Fixes: 289fcff4bcdb1 ("usb: add bus type for USB ULPI") Cc: stable <stable@kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://patch.msgid.link/20260401025142.1398996-1-lgs201920130244@gmail.com Signed-off-by: Hun_Dun <18967138853@163.com> | 3 个月前 | |
usb: hub: Don't try to recover devices lost during warm reset. stable inclusion from stable-6.6.100 commit 824fa25c85e869018502e8d5450d2eef1c0ff3af category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit 2521106fc732b0b75fd3555c689b1ed1d29d273c upstream. Hub driver warm-resets ports in SS.Inactive or Compliance mode to recover a possible connected device. The port reset code correctly detects if a connection is lost during reset, but hub driver port_event() fails to take this into account in some cases. port_event() ends up using stale values and assumes there is a connected device, and will try all means to recover it, including power-cycling the port. Details: This case was triggered when xHC host was suspended with DbC (Debug Capability) enabled and connected. DbC turns one xHC port into a simple usb debug device, allowing debugging a system with an A-to-A USB debug cable. xhci DbC code disables DbC when xHC is system suspended to D3, and enables it back during resume. We essentially end up with two hosts connected to each other during suspend, and, for a short while during resume, until DbC is enabled back. The suspended xHC host notices some activity on the roothub port, but can't train the link due to being suspended, so xHC hardware sets a CAS (Cold Attach Status) flag for this port to inform xhci host driver that the port needs to be warm reset once xHC resumes. CAS is xHCI specific, and not part of USB specification, so xhci driver tells usb core that the port has a connection and link is in compliance mode. Recovery from complinace mode is similar to CAS recovery. xhci CAS driver support that fakes a compliance mode connection was added in commit 8bea2bd37df0 ("usb: Add support for root hub port status CAS") Once xHCI resumes and DbC is enabled back, all activity on the xHC roothub host side port disappears. The hub driver will anyway think port has a connection and link is in compliance mode, and hub driver will try to recover it. The port power-cycle during recovery seems to cause issues to the active DbC connection. Fix this by clearing connect_change flag if hub_port_reset() returns -ENOTCONN, thus avoiding the whole unnecessary port recovery and initialization attempt. Cc: stable@vger.kernel.org Fixes: 8bea2bd37df0 ("usb: Add support for root hub port status CAS") Tested-by: Łukasz Bartosik <ukaszb@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20250623133947.3144608-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: dwc2: also exit clock_gating when stopping udc while suspended stable inclusion from stable-6.6.96 commit 41732f9febdccb4f9b87c13cb915d717d68ccafd category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit af076a41f8a28faf9ceb9dd2d88aef2c202ef39a ] It is possible that the gadget will be disabled, while the udc is suspended. When enabling the udc in that case, the clock gating will not be enabled again. Leaving the phy unclocked. Even when the udc is not enabled, connecting this powered but not clocked phy leads to enumeration errors on the host side. To ensure that the clock gating will be in an valid state, we ensure that the clock gating will be enabled before stopping the udc. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20250417-dwc2_clock_gating-v1-1-8ea7c4d53d73@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: dwc3: qcom: Don't leave BCR asserted stable inclusion from stable-6.6.100 commit 6cfbff5f8dc9982aaa253dbb515c5834d008c103 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit ef8abc0ba49ce717e6bc4124e88e59982671f3b5 upstream. Leaving the USB BCR asserted prevents the associated GDSC to turn on. This blocks any subsequent attempts of probing the device, e.g. after a probe deferral, with the following showing in the log: [ 1.332226] usb30_prim_gdsc status stuck at 'off' Leave the BCR deasserted when exiting the driver to avoid this issue. Cc: stable <stable@kernel.org> Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver") Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250709132900.3408752-1-krishna.kurapati@oss.qualcomm.com [ adapted to individual clock management instead of bulk clock operations ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
回退 'Pull Request !193 : lts升级 6.6.101->6.6.102' | 11 个月前 | |
usb: fotg210: Add missing kernel doc description stable inclusion from stable-6.6.33 commit 7723485af6de4180ad3a50c558eb67109e38a204 category: bugfix issue: #IB7W7N CVE: NA Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> --------------------------------------- [ Upstream commit 4b653e82ae18f2dc91c7132b54f5785c4d56bab4 ] kernel-doc validator is not happy: warning: Function parameter or struct member 'fotg' not described in 'fotg210_vbus' Add missing description. Fixes: 3e679bde529e ("usb: fotg210-udc: Implement VBUS session") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240510152641.2421298-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> | 1 年前 | |
usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks() [ Upstream commit 8479891d1f04a8ce55366fe4ca361ccdb96f02e1 ] The check_command_size_in_blocks() function calculates the data size in bytes by left shifting common->data_size_from_cmnd by the block size (common->curlun->blkbits). However, it does not validate whether this shift operation will cause an integer overflow. Initially, the block size is set up in fsg_lun_open() , and the common->data_size_from_cmnd is set up in do_scsi_command(). During initialization, there is no integer overflow check for the interaction between two variables. So if a malicious USB host sends a SCSI READ or WRITE command requesting a large amount of data (common->data_size_from_cmnd), the left shift operation can wrap around. This results in a truncated data size, which can bypass boundary checks and potentially lead to memory corruption or out-of-bounds accesses. Fix this by using the check_shl_overflow() macro to safely perform the shift and catch any overflows. Fixes: 144974e7f9e3 ("usb: gadget: mass_storage: support multi-luns with different logic block size") Signed-off-by: llj123 <luojie119@h-partners.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://patch.msgid.link/20260228104324.1696455-2-eeodqql09@gmail.com | 3 个月前 | |
kernel: repair linux-6.6 CVE backport build Signed-off-by: Hun_Dun <18967138853@163.com> | 3 个月前 | |
scsi: usb: uas: Declare two host templates and host template pointers const Improve source code documentation by constifying host templates that are not modified. Acked-by: Alan Stern <stern@rowland.harvard.edu> (for usb-storage) Acked-by: Oliver Neukum <oneukum@suse.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Oliver Neukum <oneukum@suse.com> Cc: linux-usb@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-81-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 3 年前 | |
usb: isp1760: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Rui Miguel Silva <rui.silva@linaro.org> Link: https://lore.kernel.org/r/20230517230239.187727-86-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
回退 'Pull Request !193 : lts升级 6.6.101->6.6.102' | 11 个月前 | |
usb: mon: Fix atomicity violation in mon_bin_vma_fault commit 2dd23cc4d0e6aa55cf9fb3b05f2f4165b01de81c upstream. In mon_bin_vma_fault(): offset = vmf->pgoff << PAGE_SHIFT; if (offset >= rp->b_size) return VM_FAULT_SIGBUS; chunk_idx = offset / CHUNK_SIZE; pageptr = rp->b_vec[chunk_idx].pg; The code is executed without holding any lock. In mon_bin_vma_close(): spin_lock_irqsave(&rp->b_lock, flags); rp->mmap_active--; spin_unlock_irqrestore(&rp->b_lock, flags); In mon_bin_ioctl(): spin_lock_irqsave(&rp->b_lock, flags); if (rp->mmap_active) { ... } else { ... kfree(rp->b_vec); rp->b_vec = vec; rp->b_size = size; ... } spin_unlock_irqrestore(&rp->b_lock, flags); Concurrent execution of mon_bin_vma_fault() with mon_bin_vma_close() and mon_bin_ioctl() could lead to atomicity violations. mon_bin_vma_fault() accesses rp->b_size and rp->b_vec without locking, risking array out-of-bounds access or use-after-free bugs due to possible modifications in mon_bin_ioctl(). This possible bug is found by an experimental static analysis tool developed by our team, BassCheck[1]. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported when our tool analyzes the source code of Linux 6.2. To address this issue, it is proposed to add a spin lock pair in mon_bin_vma_fault() to ensure atomicity. With this patch applied, our tool never reports the possible bug, with the kernel configuration allyesconfig for x86_64. Due to the lack of associated hardware, we cannot test the patch in runtime testing, and just verify it according to the code logic. [1] https://sites.google.com/view/basscheck/ Fixes: 19e6317d24c2 ("usb: mon: Fix a deadlock in usbmon between ...") Cc: <stable@vger.kernel.org> Signed-off-by: Gui-Dong Han <2045gemini@gmail.com> Link: https://lore.kernel.org/r/20240105052412.9377-1-2045gemini@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2 年前 | |
usb: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
usb: musb: fix gadget state on disconnect stable inclusion from stable-6.6.100 commit ec35a7125d945ed66bf1147ace59db414a259ac6 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit 67a59f82196c8c4f50c83329f0577acfb1349b50 upstream. When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with echo "" > /sys/kernel/config/usb_gadget/<your_gadget>/UDC, /sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED. Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED. Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop to fix both cases. Fixes: 49401f4169c0 ("usb: gadget: introduce gadget state tracking") Cc: stable@vger.kernel.org Co-authored-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com> Signed-off-by: Yehowshua Immanuel <yehowshua.immanuel@twosixtech.com> Signed-off-by: Drew Hamilton <drew.hamilton@zetier.com> Link: https://lore.kernel.org/r/20250701154126.8543-1-drew.hamilton@zetier.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: phy: isp1301: fix non-OF device reference imbalance stable inclusion from stable-6.6.105 commit b4b64fda4d30 category: bugfix issue: #223 CVE: CVE-2025-71145 Signed-off-by: zxl <1554188414@qq.com> ------------------------------- usb: phy: isp1301: fix non-OF device reference imbalance A recent change fixing a device reference leak in a UDC driver introduced a potential use-after-free in the non-OF case as the isp1301_get_client() helper only increases the reference count for the returned I2C device in the OF case. Increment the reference count also for non-OF so that the caller can decrement it unconditionally. Note that this is inherently racy just as using the returned I2C device is since nothing is preventing the PHY driver from being unbound while in use. Fixes: c84117912bdd ("USB: lpc32xx_udc: Fix error handling in probe") Cc: stable@vger.kernel.org Cc: Ma Ke <make24@iscas.ac.cn> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zxl <1554188414@qq.com> | 5 个月前 | |
usb: renesas_usbhs: Reorder clock handling and power management in probe stable inclusion from stable-6.6.94 commit db96a4fd8614d47c0def265e0e6c996b0ee52a38 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- [ Upstream commit ffb34a60ce86656ba12d46e91f1ccc71dd221251 ] Reorder the initialization sequence in usbhs_probe() to enable runtime PM before accessing registers, preventing potential crashes due to uninitialized clocks. Currently, in the probe path, registers are accessed before enabling the clocks, leading to a synchronous external abort on the RZ/V2H SoC. The problematic call flow is as follows: usbhs_probe() usbhs_sys_clock_ctrl() usbhs_bset() usbhs_write() iowrite16() <-- Register access before enabling clocks Since iowrite16() is performed without ensuring the required clocks are enabled, this can lead to access errors. To fix this, enable PM runtime early in the probe function and ensure clocks are acquired before register access, preventing crashes like the following on RZ/V2H: [13.272640] Internal error: synchronous external abort: 0000000096000010 [#1] PREEMPT SMP [13.280814] Modules linked in: cec renesas_usbhs(+) drm_kms_helper fuse drm backlight ipv6 [13.289088] CPU: 1 UID: 0 PID: 195 Comm: (udev-worker) Not tainted 6.14.0-rc7+ #98 [13.296640] Hardware name: Renesas RZ/V2H EVK Board based on r9a09g057h44 (DT) [13.303834] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [13.310770] pc : usbhs_bset+0x14/0x4c [renesas_usbhs] [13.315831] lr : usbhs_probe+0x2e4/0x5ac [renesas_usbhs] [13.321138] sp : ffff8000827e3850 [13.324438] x29: ffff8000827e3860 x28: 0000000000000000 x27: ffff8000827e3ca0 [13.331554] x26: ffff8000827e3ba0 x25: ffff800081729668 x24: 0000000000000025 [13.338670] x23: ffff0000c0f08000 x22: 0000000000000000 x21: ffff0000c0f08010 [13.345783] x20: 0000000000000000 x19: ffff0000c3b52080 x18: 00000000ffffffff [13.352895] x17: 0000000000000000 x16: 0000000000000000 x15: ffff8000827e36ce [13.360009] x14: 00000000000003d7 x13: 00000000000003d7 x12: 0000000000000000 [13.367122] x11: 0000000000000000 x10: 0000000000000aa0 x9 : ffff8000827e3750 [13.374235] x8 : ffff0000c1850b00 x7 : 0000000003826060 x6 : 000000000000001c [13.381347] x5 : 000000030d5fcc00 x4 : ffff8000825c0000 x3 : 0000000000000000 [13.388459] x2 : 0000000000000400 x1 : 0000000000000000 x0 : ffff0000c3b52080 [13.395574] Call trace: [13.398013] usbhs_bset+0x14/0x4c [renesas_usbhs] (P) [13.403076] platform_probe+0x68/0xdc [13.406738] really_probe+0xbc/0x2c0 [13.410306] __driver_probe_device+0x78/0x120 [13.414653] driver_probe_device+0x3c/0x154 [13.418825] __driver_attach+0x90/0x1a0 [13.422647] bus_for_each_dev+0x7c/0xe0 [13.426470] driver_attach+0x24/0x30 [13.430032] bus_add_driver+0xe4/0x208 [13.433766] driver_register+0x68/0x130 [13.437587] __platform_driver_register+0x24/0x30 [13.442273] renesas_usbhs_driver_init+0x20/0x1000 [renesas_usbhs] [13.448450] do_one_initcall+0x60/0x1d4 [13.452276] do_init_module+0x54/0x1f8 [13.456014] load_module+0x1754/0x1c98 [13.459750] init_module_from_file+0x88/0xcc [13.464004] __arm64_sys_finit_module+0x1c4/0x328 [13.468689] invoke_syscall+0x48/0x104 [13.472426] el0_svc_common.constprop.0+0xc0/0xe0 [13.477113] do_el0_svc+0x1c/0x28 [13.480415] el0_svc+0x30/0xcc [13.483460] el0t_64_sync_handler+0x10c/0x138 [13.487800] el0t_64_sync+0x198/0x19c [13.491453] Code: 2a0103e1 12003c42 12003c63 8b010084 (79400084) [13.497522] ---[ end trace 0000000000000000 ]--- Fixes: f1407d5c66240 ("usb: renesas_usbhs: Add Renesas USBHS common code") Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20250407105002.107181-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: roles: set switch registered flag early on stable inclusion from stable-6.6.79 commit 5d6749bb1b1b8963958c4a2de64277cab252a036 category: bugfix issue: #IC1IVT CVE: NA Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> --------------------------------------- commit 634775a752a86784511018a108f3b530cc3399a7 upstream. The role switch registration and set_role() can happen in parallel as they are invoked independent of each other. There is a possibility that a driver might spend significant amount of time in usb_role_switch_register() API due to the presence of time intensive operations like component_add() which operate under common mutex. This leads to a time window after allocating the switch and before setting the registered flag where the set role notifications are dropped. Below timeline summarizes this behavior Thread1 | Thread2 usb_role_switch_register() | | | ---> allocate switch | | | ---> component_add() | usb_role_switch_set_role() | | | | | --> Drop role notifications | | since sw->registered | | flag is not set. | | --->Set registered flag.| To avoid this, set the registered flag early on in the switch register API. Fixes: b787a3e78175 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered") Cc: stable <stable@kernel.org> Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zyf1116 <zhouyongfei3@huawei.com> | 1 年前 | |
回退 'Pull Request !193 : lts升级 6.6.101->6.6.102' | 11 个月前 | |
usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device stable inclusion from stable-6.6.94 commit ff835ab115f0fbec9397d6f0848612a6254a7e5c category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit a541acceedf4f639f928f41fbb676b75946dc295 upstream. SanDisk 3.2 Gen2 storage device(0781:55e8) doesn't work well with UAS. Log says, [ 6.507865][ 3] [ T159] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 6.540314][ 3] [ T159] usb 2-1.4: New USB device found, idVendor=0781, idProduct=55e8, bcdDevice= 0.01 [ 6.576304][ 3] [ T159] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.584727][ 3] [ T159] usb 2-1.4: Product: SanDisk 3.2 Gen2 [ 6.590459][ 3] [ T159] usb 2-1.4: Manufacturer: SanDisk [ 6.595845][ 3] [ T159] usb 2-1.4: SerialNumber: 03021707022525140940 [ 7.230852][ 0] [ T265] usbcore: registered new interface driver usb-storage [ 7.251247][ 0] [ T265] scsi host3: uas [ 7.255280][ 0] [ T265] usbcore: registered new interface driver uas [ 7.270498][ 1] [ T192] scsi 3:0:0:0: Direct-Access SanDisk Extreme Pro DDE1 0110 PQ: 0 ANSI: 6 [ 7.299588][ 3] [ T192] scsi 3:0:0:1: Enclosure SanDisk SES Device 0110 PQ: 0 ANSI: 6 [ 7.321681][ 3] [ T192] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 7.328185][ 3] [ T192] scsi 3:0:0:1: Attached scsi generic sg2 type 13 [ 7.328804][ 0] [ T191] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 7.343486][ 0] [ T191] sd 3:0:0:0: [sda] 4096-byte physical blocks [ 7.364611][ 0] [ T191] sd 3:0:0:0: [sda] Write Protect is off [ 7.370524][ 0] [ T191] sd 3:0:0:0: [sda] Mode Sense: 3d 00 10 00 [ 7.390655][ 0] [ T191] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 7.401363][ 0] [ T191] sd 3:0:0:0: [sda] Optimal transfer size 1048576 bytes [ 7.436010][ 0] [ T191] sda: sda1 [ 7.450850][ 0] [ T191] sd 3:0:0:0: [sda] Attached SCSI disk [ 7.470218][ 4] [ T262] scsi 3:0:0:1: Failed to get diagnostic page 0x1 [ 7.474869][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 data cmplt err -75 uas-tag 2 inflight: CMD [ 7.476911][ 4] [ T262] scsi 3:0:0:1: Failed to bind enclosure -19 [ 7.485330][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00 [ 7.491593][ 4] [ T262] ses 3:0:0:1: Attached Enclosure device [ 38.066980][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN [ 38.076012][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00 [ 38.086485][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN [ 38.095515][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 10 00 00 08 00 [ 38.104122][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN [ 38.113152][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00 [ 38.121761][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN [ 38.130791][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00 [ 38.139401][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD [ 38.148170][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00 [ 38.178980][ 2] [ T304] scsi host3: uas_eh_device_reset_handler start [ 38.901540][ 2] [ T304] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd [ 38.936791][ 2] [ T304] scsi host3: uas_eh_device_reset_handler success Device decriptor is below, Bus 002 Device 006: ID 0781:55e8 SanDisk Corp. SanDisk 3.2 Gen2 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x0781 SanDisk Corp. idProduct 0x55e8 bcdDevice 0.01 iManufacturer 1 SanDisk iProduct 2 SanDisk 3.2 Gen2 iSerial 3 03021707022525140940 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0079 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 896mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 4 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 98 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Command pipe (0x01) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Status pipe (0x02) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-in pipe (0x03) Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 15 MaxStreams 32 Data-out pipe (0x04) Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 0x002a bNumDeviceCaps 3 USB 2.0 Extension Device Capability: bLength 7 bDescriptorType 16 bDevCapabilityType 2 bmAttributes 0x0000f41e BESL Link Power Management (LPM) Supported BESL value 1024 us Deep BESL value 61440 us SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 wSpeedsSupported 0x000e Device can operate at Full Speed (12Mbps) Device can operate at High Speed (480Mbps) Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 1 Lowest fully-functional device speed is Full Speed (12Mbps) bU1DevExitLat 10 micro seconds bU2DevExitLat 2047 micro seconds SuperSpeedPlus USB Device Capability: bLength 20 bDescriptorType 16 bDevCapabilityType 10 bmAttributes 0x00000001 Sublink Speed Attribute count 1 Sublink Speed ID count 0 wFunctionalitySupport 0x1100 bmSublinkSpeedAttr[0] 0x000a4030 Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus bmSublinkSpeedAttr[1] 0x000a40b0 Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus Device Status: 0x0000 (Bus Powered) So ignore UAS driver for this device. Signed-off-by: Hongyu Xie <xiehongyu1@kylinos.cn> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20250519023328.1498856-1-xiehongyu1@kylinos.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach stable inclusion from stable-6.6.101 commit f9377bdf86ea5e8f5073c4c4ab0e69b80b220247 category: bugfix issue: #ICCW0G CVE: NA Signed-off-by: Li Nan <linan122@huawei.com> --------------------------------------- commit bec15191d52300defa282e3fd83820f69e447116 upstream. This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS. tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer. Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail. Turn VBUS on before tcpm_set_roles to meet timing requirement. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Cc: stable <stable@kernel.org> Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250618230606.3272497-2-rdbabiera@google.com Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Li Nan <linan122@huawei.com> | 1 年前 | |
usbip: Don't submit special requests twice stable inclusion from stable-6.6.50 commit 73ec94aac593ef4bac3a864365f0433b8266225b category: bugfix issue: #IB7W7N CVE: NA Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> --------------------------------------- [ Upstream commit 8b6b386f9aa936ed0c190446c71cf59d4a507690 ] Skip submitting URBs, when identical requests were already sent in tweak_special_requests(). Instead call the completion handler directly to return the result of the URB. Even though submitting those requests twice should be harmless, there are USB devices that react poorly to some duplicated requests. One example is the ChipIdea controller implementation in U-Boot: The second SET_CONFIGURATION request makes U-Boot disable and re-enable all endpoints. Re-enabling an endpoint in the ChipIdea controller, however, was broken until U-Boot commit b272c8792502 ("usb: ci: Fix gadget reinit"). Signed-off-by: Simon Holesch <simon@holesch.de> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Hongren Zheng <i@zenithal.me> Tested-by: Hongren Zheng <i@zenithal.me> Link: https://lore.kernel.org/r/20240519141922.171460-1-simon@holesch.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> | 1 年前 | |
usb: move config USB_USS720 to usb's misc Kconfig The USS720 parport driver source code is in drivers/usb/misc/, the corresponding config is defined in drivers/usb/Kconfig. Some digging in the kernel's history revealed no good reason why it needs to be defined in USB's top-level Kconfig file, and why the config for the USS720 parport driver should be the first in the list of USB port drivers, while all other configs for drivers in drivers/usb/misc are in the USB Miscellaneous driver configuration file. Most probably, it was simply considered a bit more special when the USB Miscellaneous driver configuration file (drivers/usb/misc/Config.in back then) was initially created, and this config simply survived to remain at the top-level USB Kconfig file with all further code/Kconfig transformations and additions later on. Users rarely notice this config being at this position, as CONFIG_PARPORT (Parallel port support) needs to be enabled and only few users enable that. Nowadays, this USB_USS720 driver is probably not that special that it needs to be listed as first item of the USB port drivers. Move the configuration of the USS720 parport driver to the top of the USB Miscellaneous drivers section, as the configurations does not have a lot of specific ordering USB Miscellaneous drivers. This way, the USS720 parport driver is moved to the comment "USB Miscellaneous drivers", fitting to the driver's source code location, but still is at the top of the list for those few acquainted users of Kconfig UIs that might be looking for the config that was once at the top of the list of the USB port drivers. Put this config definition to a more local place. No semantic change. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20230329075125.32352-1-lukas.bulwahn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected stable inclusion from stable-6.6.35 commit b641889cc1cfd83abad416201f747955f5b79690 category: bugfix issue: #IB7W7N CVE: NA Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> --------------------------------------- commit 8475ffcfb381a77075562207ce08552414a80326 upstream. If no other USB HCDs are selected when compiling a small pure virutal machine, the Xen HCD driver cannot be built. Fix it by traversing down host/ if CONFIG_USB_XEN_HCD is selected. Fixes: 494ed3997d75 ("usb: Introduce Xen pvUSB frontend (xen hcd)") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: John Ernberg <john.ernberg@actia.se> Link: https://lore.kernel.org/r/20240517114345.1190755-1-john.ernberg@actia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: zhangshuqi <zhangshuqi3@huawei.com> | 1 年前 | |
usb: add usb_set_intfdata() documentation USB drivers do not need to call usb_set_intfdata(intf, NULL) in their usb_driver::disconnect callback because the core already does it in [1]. However, this fact is widely unknown, c.f.: $ git grep "usb_set_intfdata(.*NULL)" | wc -l 215 Especially, setting the interface to NULL before all action completed can result in a NULL pointer dereference. Not calling usb_set_intfdata() at all in disconnect() is the safest method. Add documentation to usb_set_intfdata() to clarify this point. Also remove the call in usb-skeletion's disconnect() not to confuse the new comers. [1] function usb_unbind_interface() from drivers/usb/core/driver.c Link: https://elixir.bootlin.com/linux/v6.0/source/drivers/usb/core/driver.c#L497 Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20221128102954.3615579-1-mailhol.vincent@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 1 年前 | ||
| 3 年前 | ||
| 3 个月前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 3 个月前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 11 个月前 | ||
| 1 年前 | ||
| 3 个月前 | ||
| 3 个月前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 11 个月前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 5 个月前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 11 个月前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 3 年前 |