* Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved.
* Copyright (c) 2020-2021 Huawei Device Co., Ltd. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this list of
* conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice, this list
* of conditions and the following disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* 3. Neither the name of the copyright holder nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
* @defgroup los_event Event
* @ingroup kernel
*/
#ifndef _LOS_EVENT_H
#define _LOS_EVENT_H
#include "los_base.h"
#include "los_list.h"
#ifdef __cplusplus
#if __cplusplus
extern "C" {
#endif
#endif
* @ingroup los_event
* Event reading mode: The task waits for all its expected events to occur.
*/
#define LOS_WAITMODE_AND 4U
* @ingroup los_event
* Event reading mode: The task waits for any of its expected events to occur.
*/
#define LOS_WAITMODE_OR 2U
* @ingroup los_event
* Event reading mode: The event flag is immediately cleared after the event is read.
*/
#define LOS_WAITMODE_CLR 1U
* @ingroup los_event
* Bit 25 of the event mask cannot be set to an event because it is set to an error code.
*
* Value: 0x02001c00
*
* Solution: Set bits excluding bit 25 of the event mask to events.
*/
#define LOS_ERRNO_EVENT_SETBIT_INVALID LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x00)
* @ingroup los_event
* Event reading error code: Event reading times out.
*
* Value: 0x02001c01
*
* Solution: Increase the waiting time for event reading, or make another task write a mask for the event.
*/
#define LOS_ERRNO_EVENT_READ_TIMEOUT LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x01)
* @ingroup los_event
* Event reading error code: The EVENTMASK input parameter value is valid. The input parameter value must not be 0.
*
* Value: 0x02001c02
*
* Solution: Pass in a valid EVENTMASK value.
*/
#define LOS_ERRNO_EVENT_EVENTMASK_INVALID LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x02)
* @ingroup los_event
* Event reading error code: The event is being read during an interrupt.
*
* Value: 0x02001c03
*
* Solution: Read the event in a task.
*/
#define LOS_ERRNO_EVENT_READ_IN_INTERRUPT LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x03)
* @ingroup los_event
* Event reading error code: The flag input parameter value used in the event reading API is invalid.
* This input parameter value is obtained by performing an OR operation on corresponding bits of either OS_EVENT_ANY or
* OS_EVENT_ANY and corresponding bits of either OS_EVENT_WAIT or OS_EVENT_NOWAIT. The waiting time must be set to
* a nonzero value when an event is read in the mode of OS_EVENT_WAIT.
*
* Value: 0x02001c04
*
* Solution: Pass in a valid flag value.
*/
#define LOS_ERRNO_EVENT_FLAGS_INVALID LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x04)
* @ingroup los_event
* Event reading error code: The task is locked and is unable to read the event.
*
* Value: 0x02001c05
*
* Solution: Unlock the task and read the event.
*/
#define LOS_ERRNO_EVENT_READ_IN_LOCK LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x05)
* @ingroup los_event
* Event reading error code: Null pointer.
*
* Value: 0x02001c06
*
* Solution: Check whether the input parameter is null.
*/
#define LOS_ERRNO_EVENT_PTR_NULL LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x06)
* @ingroup los_event
* Event reading error code: The event is being read in system-level task.
* old usage: The event is being read in software timer task. (LOS_ERRNO_EVENT_READ_IN_SWTMR_TSK)
* Value: 0x02001c07
*
* Solution: Read the event in a vailid task.
*/
#define LOS_ERRNO_EVENT_READ_IN_SYSTEM_TASK LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x07)
* @ingroup los_event
* Event reading error code: should not be destroy.
*
* Value: 0x02001c08
*
* Solution: Check whether the event list is not empty.
*/
#define LOS_ERRNO_EVENT_SHOULD_NOT_DESTROY LOS_ERRNO_OS_ERROR(LOS_MOD_EVENT, 0x08)
* @ingroup los_event
* Event control structure
*/
typedef struct tagEvent {
UINT32 uwEventID;
indicating the event that has been logically processed. */
LOS_DL_LIST stEventList;
} EVENT_CB_S, *PEVENT_CB_S;
* @ingroup los_event
* @brief Initialize an event control block.
*
* @par Description:
* This API is used to initialize the event control block pointed to by eventCB.
* @attention
* <ul>
* <li>None.</li>
* </ul>
*
* @param eventCB [IN/OUT] Pointer to the event control block to be initialized.
*
* @retval #LOS_ERRNO_EVENT_PTR_NULL Null pointer.
* @retval #LOS_OK The event control block is successfully initialized.
* @par Dependency:
* <ul><li>los_event.h: the header file that contains the API declaration.</li></ul>
* @see LOS_EventClear
*/
extern UINT32 LOS_EventInit(PEVENT_CB_S eventCB);
* @ingroup los_event
* @brief Obtain an event specified by the event ID.
*
* @par Description:
* This API is used to check whether an event expected by the user occurs according to the event ID, event mask,
* and event reading mode, and process the event based on the event reading mode. The event ID must point to
* valid memory.
* @attention
* <ul>
* <li>When the mode is LOS_WAITMODE_CLR, the eventID is passed-out.</li>
* <li>Otherwise the eventID is passed-in.</li>
* <li>An error code and an event return value can be same. To differentiate the error code and return value, bit 25 of
* the event mask is forbidden to be used.</li>
* </ul>
*
* @param eventID [IN/OUT] Pointer to the ID of the event to be checked.
* @param eventMask [IN] Mask of the event expected to occur by the user, indicating the event obtained after
* it is logically processed that matches the ID pointed to by eventID.
* @param mode [IN] Event reading mode. The modes include LOS_WAITMODE_AND, LOS_WAITMODE_OR, LOS_WAITMODE_CLR.
*
* @retval #LOS_ERRNO_EVENT_SETBIT_INVALID Bit 25 of the event mask cannot be set because it is set to an
* error number.
* @retval #LOS_ERRNO_EVENT_EVENTMASK_INVALID The passed-in event mask is incorrect.
* @retval #LOS_ERRNO_EVENT_FLAGS_INVALID The passed-in event mode is invalid.
* @retval #LOS_ERRNO_EVENT_PTR_NULL The passed-in pointer is null.
* @retval 0 The event expected by the user does not occur.
* @retval #UINT32 The event expected by the user occurs.
* @par Dependency:
* <ul><li>los_event.h: the header file that contains the API declaration.</li></ul>
* @see LOS_EventRead | LOS_EventWrite
*/
extern UINT32 LOS_EventPoll(UINT32 *eventID, UINT32 eventMask, UINT32 mode);
* @ingroup los_event
* @brief Read an event.
*
* @par Description:
* This API is used to block or schedule a task that reads an event of which the event control block, event mask,
* reading mode, and timeout information are specified.
* </ul>
* @attention
* <ul>
* <li>An error code and an event return value can be same. To differentiate the error code and return value, bit 25 of
* the event mask is forbidden to be used.</li>
* </ul>
*
* @param eventCB [IN/OUT] Pointer to the event control block to be checked. This parameter must point
* to valid memory.
* @param eventMask [IN] Mask of the event expected to occur by the user, indicating the event obtained after
* it is logically processed that matches the ID pointed to by eventID.
* @param mode [IN] Event reading mode.
* @param timeout [IN] Timeout interval of event reading (unit: Tick).
*
* @retval #LOS_ERRNO_EVENT_SETBIT_INVALID Bit 25 of the event mask cannot be set because it is set to an
* error number.
* @retval #LOS_ERRNO_EVENT_EVENTMASK_INVALID The passed-in event reading mode is incorrect.
* @retval #LOS_ERRNO_EVENT_READ_IN_INTERRUPT The event is being read during an interrupt.
* @retval #LOS_ERRNO_EVENT_FLAGS_INVALID The event mode is invalid.
* @retval #LOS_ERRNO_EVENT_READ_IN_LOCK The event reading task is locked.
* @retval #LOS_ERRNO_EVENT_PTR_NULL The passed-in pointer is null.
* @retval 0 The event expected by the user does not occur.
* @retval #UINT32 The event expected by the user occurs.
* @par Dependency:
* <ul><li>los_event.h: the header file that contains the API declaration.</li></ul>
* @see LOS_EventPoll | LOS_EventWrite
*/
extern UINT32 LOS_EventRead(PEVENT_CB_S eventCB, UINT32 eventMask, UINT32 mode, UINT32 timeout);
* @ingroup los_event
* @brief Write an event.
*
* @par Description:
* This API is used to write an event specified by the passed-in event mask into an event control block
* pointed to by eventCB.
* @attention
* <ul>
* <li>To determine whether the LOS_EventRead API returns an event or an error code, bit 25 of the event mask
* is forbidden to be used.</li>
* </ul>
*
* @param eventCB [IN/OUT] Pointer to the event control block into which an event is to be written.
* This parameter must point to valid memory.
* @param events [IN] Event mask to be written.
*
* @retval #LOS_ERRNO_EVENT_SETBIT_INVALID Bit 25 of the event mask cannot be set to an event
* because it is set to an error code.
* @retval #LOS_ERRNO_EVENT_PTR_NULL Null pointer.
* @retval #LOS_OK The event is successfully written.
* @par Dependency:
* <ul><li>los_event.h: the header file that contains the API declaration.</li></ul>
* @see LOS_EventPoll | LOS_EventRead
*/
extern UINT32 LOS_EventWrite(PEVENT_CB_S eventCB, UINT32 events);
* @ingroup los_event
* @brief Clear the event of the eventCB by a specified eventMask.
*
* @par Description:
* <ul>
* <li>This API is used to set the ID of an event that has a specified mask and of which the information is stored in
* an event control block pointed to by eventCB to 0. eventCB must point to valid memory.</li>
* </ul>
* @attention
* <ul>
* <li>The value of events needs to be reversed when it is passed-in.</li>
* </ul>
*
* @param eventCB [IN/OUT] Pointer to the event control block to be cleared.
* @param eventMask [IN] Mask of the event to be cleared.
*
* @retval #LOS_ERRNO_EVENT_PTR_NULL Null pointer.
* @retval #LOS_OK The event is successfully cleared.
* @par Dependency:
* <ul><li>los_event.h: the header file that contains the API declaration.</li></ul>
* @see LOS_EventPoll | LOS_EventRead | LOS_EventWrite
*/
extern UINT32 LOS_EventClear(PEVENT_CB_S eventCB, UINT32 eventMask);
* @ingroup los_event
* @brief Destroy an event.
*
* @par Description:
* <ul>
* <li>This API is used to Destroy an event.</li>
* </ul>
* @attention
* <ul>
* <li>The specific event should be a valid one.</li>
* </ul>
*
* @param eventCB [IN/OUT] Pointer to the event control block to be destroyed.
*
* @retval #LOS_ERRNO_EVENT_PTR_NULL Null pointer.
* @retval #LOS_OK The event is successfully cleared.
* @par Dependency:
* <ul><li>los_event.h: the header file that contains the API declaration.</li></ul>
* @see LOS_EventPoll | LOS_EventRead | LOS_EventWrite
*/
extern UINT32 LOS_EventDestroy(PEVENT_CB_S eventCB);
#ifdef __cplusplus
#if __cplusplus
}
#endif
#endif
#endif
