/*
 * Copyright (c) 2013-2019 Huawei Technologies Co., Ltd. All rights reserved.
 * Copyright (c) 2020-2023 Huawei Device Co., Ltd. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice, this list of
 *    conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice, this list
 *    of conditions and the following disclaimer in the documentation and/or other materials
 *    provided with the distribution.
 *
 * 3. Neither the name of the copyright holder nor the names of its contributors may be used
 *    to endorse or promote products derived from this software without specific prior written
 *    permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/**
 * @defgroup los_swtmr Software timer
 * @ingroup kernel
 */

#ifndef _LOS_SWTMR_H
#define _LOS_SWTMR_H

#include "los_base.h"
#include "los_task.h"
#include "los_sortlink_pri.h"

#ifdef __cplusplus
#if __cplusplus
extern "C" {
#endif /* __cplusplus */
#endif /* __cplusplus */

/**
 * @ingroup los_swtmr
 * Software timer error code: The timeout handling function is NULL.
 *
 * Value: 0x02000300
 *
 * Solution: Define the timeout handling function.
 */
#define LOS_ERRNO_SWTMR_PTR_NULL               LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x00)

/**
 * @ingroup los_swtmr
 * Software timer error code: The expiration time is 0.
 *
 * Value: 0x02000301
 *
 * Solution: Re-define the expiration time.
 */
#define LOS_ERRNO_SWTMR_INTERVAL_NOT_SUITED    LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x01)

/**
 * @ingroup los_swtmr
 * Software timer error code: Invalid software timer mode.
 *
 * Value: 0x02000302
 *
 * Solution: Check the mode value. The value range is [0,3].
 */
#define LOS_ERRNO_SWTMR_MODE_INVALID           LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x02)

/**
 * @ingroup los_swtmr
 * Software timer error code: The passed-in software timer ID is NULL.
 *
 * Value: 0x02000303
 *
 * Solution: Define the software timer ID before passing it in.
 */
#define LOS_ERRNO_SWTMR_RET_PTR_NULL           LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x03)

/**
 * @ingroup los_swtmr
 * Software timer error code: The number of software timers exceeds the configured permitted maximum number.
 *
 * Value: 0x02000304
 *
 * Solution: Re-configure the permitted maximum number of software timers, or wait for a software timer to become
 * available.
 */
#define LOS_ERRNO_SWTMR_MAXSIZE                LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x04)

/**
 * @ingroup los_swtmr
 * Software timer error code: Invalid software timer ID.
 *
 * Value: 0x02000305
 *
 * Solution: Pass in a valid software timer ID.
 */
#define LOS_ERRNO_SWTMR_ID_INVALID             LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x05)

/**
 * @ingroup los_swtmr
 * Software timer error code: The software timer is not created.
 *
 * Value: 0x02000306
 *
 * Solution: Create a software timer.
 */
#define LOS_ERRNO_SWTMR_NOT_CREATED            LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x06)

/**
 * @ingroup los_swtmr
 * Software timer error code: Insufficient memory for software timer linked list creation.
 *
 * Value: 0x02000307
 *
 * Solution: Allocate bigger memory partition to software timer linked list creation.
 */
#define LOS_ERRNO_SWTMR_NO_MEMORY              LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x07)

/**
 * @ingroup los_swtmr
 * Software timer error code: Invalid configured number of software timers.
 *
 * Value: 0x02000308
 *
 * Solution: Re-configure the number of software timers.
 */
#define LOS_ERRNO_SWTMR_MAXSIZE_INVALID        LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x08)

/**
 * @ingroup los_swtmr
 * Software timer error code: The software timer is being used during an interrupt.
 *
 * Value: 0x02000309
 *
 * Solution: Change the source code and do not use the software timer during an interrupt.
 */
#define LOS_ERRNO_SWTMR_HWI_ACTIVE             LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x09)

/**
 * @ingroup los_swtmr
 * Software timer error code: Insufficient memory allocated by membox.
 *
 * Value: 0x0200030a
 *
 * Solution: Expand the memory allocated by membox.
 */
#define LOS_ERRNO_SWTMR_HANDLER_POOL_NO_MEM    LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x0a)

/**
 * @ingroup los_swtmr
 * Software timer error code: The software timer queue fails to be created.
 *
 * Value: 0x0200030b
 *
 * Solution: Check whether more memory can be allocated to the queue to be created.
 */
#define LOS_ERRNO_SWTMR_QUEUE_CREATE_FAILED    LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x0b)

/**
 * @ingroup los_swtmr
 * Software timer error code: The software timer task fails to be created.
 *
 * Value: 0x0200030c
 *
 * Solution: Check whether the memory is sufficient and re-create the task.
 */
#define LOS_ERRNO_SWTMR_TASK_CREATE_FAILED     LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x0c)

/**
 * @ingroup los_swtmr
 * Software timer error code: The software timer is not started.
 *
 * Value: 0x0200030d
 *
 * Solution: Start the software timer.
 */
#define LOS_ERRNO_SWTMR_NOT_STARTED            LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x0d)

/**
 * @ingroup los_swtmr
 * Software timer error code: Invalid software timer state.
 *
 * Value: 0x0200030e
 *
 * Solution: Check the software timer state.
 */
#define LOS_ERRNO_SWTMR_STATUS_INVALID         LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x0e)

/**
 * @ingroup los_swtmr
 * This error code is not in use temporarily.
 */
#define LOS_ERRNO_SWTMR_SORTLIST_NULL          LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x0f)

/**
 * @ingroup los_swtmr
 * Software timer error code: The passed-in number of remaining Ticks configured on the software timer is NULL.
 *
 * Value: 0x02000310
 *
 * Solution: Define a variable of the number of remaining Ticks before passing in the number of remaining Ticks.
 */
#define LOS_ERRNO_SWTMR_TICK_PTR_NULL          LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x10)

/**
 * @ingroup los_swtmr
 * Software timer error code: The software sortlink fails to be created.
 *
 * Value: 0x02000311
 *
 * Solution: Check whether the memory is sufficient and re-create the sortlink.
 */
#define LOS_ERRNO_SWTMR_SORTLINK_CREATE_FAILED LOS_ERRNO_OS_ERROR(LOS_MOD_SWTMR, 0x11)

/**
 * @ingroup los_swtmr
 * Software timer mode
 */
enum enSwTmrType {
    LOS_SWTMR_MODE_ONCE, /**< One-off software timer */
    LOS_SWTMR_MODE_PERIOD, /**< Periodic software timer */
    LOS_SWTMR_MODE_NO_SELFDELETE, /**< One-off software timer, but not self-delete */
    LOS_SWTMR_MODE_OPP  /**< After the one-off timer finishes timing,
                             the periodic software timer is enabled.
                             This mode is not supported temporarily. */
};

/**
* @ingroup  los_swtmr
* @brief Define the type of a callback function that handles software timer timeout.
*
* @par Description:
* This API is used to define the type of a callback function that handles software timer timeout, so that it can be
* called when software timer timeout.
*
* @attention
* <ul>
* <li>None.</li>
* </ul>
*
* @param  arg     [IN] the parameter of the callback function that handles software timer timeout.
*
* @retval None.
* @par Dependency:
* <ul><li>los_swtmr.h: the header file that contains the API declaration.</li></ul>
* @see None.
*/
typedef VOID (*SWTMR_PROC_FUNC)(UINTPTR arg);

/**
 * @ingroup los_swtmr
 * Software timer control structure
 */
typedef struct tagSwTmrCtrl {
    SortLinkList stSortList;
    UINT8 ucState;      /**< Software timer state */
    UINT8 ucMode;       /**< Software timer mode */
    UINT16 usTimerID;   /**< Software timer ID */
    UINT32 uwOverrun;    /**< Times that a software timer repeats timing */
    UINT32 uwCount;     /**< Times that a software timer works */
    UINT32 uwInterval;  /**< Timeout interval of a periodic software timer */
    UINT32 uwExpiry;    /**< Timeout interval of an one-off software timer */
    UINTPTR uwArg;      /**< Parameter passed in when the callback function
                             that handles software timer timeout is called */
    SWTMR_PROC_FUNC pfnHandler; /**< Callback function that handles software timer timeout */
    UINTPTR uwOwnerPid; /** Owner of this software timer */
    UINT64 startTime;  /**< Software timer start time */
} SWTMR_CTRL_S;

/**
 * @ingroup los_swtmr
 * @brief Start a software timer.
 *
 * @par Description:
 * This API is used to start a software timer that has a specified ID.
 * @attention
 * <ul>
 * <li>The specific timer must be created first</li>
 * </ul>
 *
 * @param  swtmrID  [IN] Software timer ID created by LOS_SwtmrCreate. The value of ID should be in
 *                       [0, LOSCFG_BASE_CORE_SWTMR_LIMIT - 1].
 *
 * @retval #LOS_ERRNO_SWTMR_ID_INVALID       Invalid software timer ID.
 * @retval #LOS_ERRNO_SWTMR_NOT_CREATED      The software timer is not created.
 * @retval #LOS_ERRNO_SWTMR_STATUS_INVALID   Invalid software timer state.
 * @retval #LOS_OK                           The software timer is successfully started.
 * @par Dependency:
 * <ul><li>los_swtmr.h: the header file that contains the API declaration.</li></ul>
 * @see LOS_SwtmrStop | LOS_SwtmrCreate
 */
extern UINT32 LOS_SwtmrStart(UINT16 swtmrID);

/**
 * @ingroup los_swtmr
 * @brief Stop a software timer.
 *
 * @par Description:
 * This API is used to stop a software timer that has a specified ID.
 * @attention
 * <ul>
 * <li>The specific timer should be created and started firstly.</li>
 * </ul>
 *
 * @param  swtmrID  [IN] Software timer ID created by LOS_SwtmrCreate. The value of ID should be in
 *                       [0, LOSCFG_BASE_CORE_SWTMR_LIMIT - 1].
 *
 * @retval #LOS_ERRNO_SWTMR_ID_INVALID       Invalid software timer ID.
 * @retval #LOS_ERRNO_SWTMR_NOT_CREATED      The software timer is not created.
 * @retval #LOS_ERRNO_SWTMR_NOT_STARTED      The software timer is not started.
 * @retval #LOS_ERRNO_SWTMR_STATUS_INVALID   Invalid software timer state.
 * @retval #LOS_OK                           The software timer is successfully stopped.
 * @par Dependency:
 * <ul><li>los_swtmr.h: the header file that contains the API declaration.</li></ul>
 * @see LOS_SwtmrStart | LOS_SwtmrCreate
 */
extern UINT32 LOS_SwtmrStop(UINT16 swtmrID);

/**
 * @ingroup los_swtmr
 * @brief Obtain the number of remaining Ticks configured on a software timer.
 *
 * @par Description:
 * This API is used to obtain the number of remaining Ticks configured on the software timer of which the ID is
 * specified by usSwTmrID.
 * @attention
 * <ul>
 * <li>The specific timer should be created and started successfully, error happeneds otherwise.</li>
 * </ul>
 *
 * @param  swtmrID  [IN]  Software timer ID created by LOS_SwtmrCreate. The value of ID should be in
 *                        [0, LOSCFG_BASE_CORE_SWTMR_LIMIT - 1].
 * @param  tick     [OUT] Number of remaining Ticks configured on the software timer.
 *
 * @retval #LOS_ERRNO_SWTMR_ID_INVALID      Invalid software timer ID.
 * @retval #LOS_ERRNO_SWTMR_NOT_CREATED     The software timer is not created.
 * @retval #LOS_ERRNO_SWTMR_NOT_STARTED     The software timer is not started.
 * @retval #LOS_ERRNO_SWTMR_STATUS_INVALID  Invalid software timer state.
 * @retval #LOS_OK                          The number of remaining Ticks is successfully obtained.
 * @par Dependency:
 * <ul><li>los_swtmr.h: the header file that contains the API declaration.</li></ul>
 * @see LOS_SwtmrCreate
 */
extern UINT32 LOS_SwtmrTimeGet(UINT16 swtmrID, UINT32 *tick);

/**
 * @ingroup los_swtmr
 * @brief Create a software timer.
 *
 * @par Description:
 * This API is used to create a software timer that has specified timing duration, timeout handling function,
 * and trigger mode, and to return a handle by which the software timer can be referenced.
 * @attention
 * <ul>
 * <li>Do not use the delay interface in the callback function that handles software timer timeout.</li>
 * <li>There are LOSCFG_BASE_CORE_SWTMR_LIMIT timers available, change it's value when necessary.</li>
 * </ul>
 *
 * @param  interval     [IN] Timing duration of the software timer to be created (unit: tick).
 * @param  mode         [IN] Software timer mode. Pass in one of the modes specified by enSwTmrType. There are three
 * types of modes, one-off, periodic, and continuously periodic after one-off, of which the third mode is not
 * supported temporarily.
 * @param  handler     [IN] Callback function that handles software timer timeout.
 * @param  swtmrID     [OUT] Software timer ID created by LOS_SwtmrCreate.
 * @param  arg         [IN] Parameter passed in when the callback function that handles software timer timeout is
 * called.
 *
 * @retval #LOS_ERRNO_SWTMR_INTERVAL_NOT_SUITED   The software timer timeout interval is 0.
 * @retval #LOS_ERRNO_SWTMR_MODE_INVALID          Invalid software timer mode.
 * @retval #LOS_ERRNO_SWTMR_PTR_NULL              The callback function that handles software timer timeout is NULL.
 * @retval #LOS_ERRNO_SWTMR_RET_PTR_NULL          The passed-in software timer ID is NULL.
 * @retval #LOS_ERRNO_SWTMR_MAXSIZE               The number of software timers exceeds the configured permitted
 * maximum number.
 * @retval #LOS_OK                                The software timer is successfully created.
 * @par Dependency:
 * <ul><li>los_swtmr.h: the header file that contains the API declaration.</li></ul>
 * @see LOS_SwtmrDelete
 */
extern UINT32 LOS_SwtmrCreate(UINT32 interval, UINT8 mode, SWTMR_PROC_FUNC handler, UINT16 *swtmrID, UINTPTR arg);

/**
 * @ingroup los_swtmr
 * @brief Delete a software timer.
 *
 * @par Description:
 * This API is used to delete a software timer.
 * @attention
 * <ul>
 * <li>The specific timer should be created and then stopped firstly.</li>
 * </ul>
 *
 * @param  swtmrID     [IN] Software timer ID created by LOS_SwtmrCreate. The value of ID should be in
 *                          [0, LOSCFG_BASE_CORE_SWTMR_LIMIT - 1].
 *
 * @retval #LOS_ERRNO_SWTMR_ID_INVALID        Invalid software timer ID.
 * @retval #LOS_ERRNO_SWTMR_NOT_CREATED       The software timer is not created.
 * @retval #LOS_ERRNO_SWTMR_STATUS_INVALID    Invalid software timer state.
 * @retval #LOS_OK                            The software timer is successfully deleted.
 * @par Dependency:
 * <ul><li>los_swtmr.h: the header file that contains the API declaration.</li></ul>
 * @see LOS_SwtmrCreate
 */
extern UINT32 LOS_SwtmrDelete(UINT16 swtmrID);

SWTMR_PROC_FUNC GetSwtmrProcPtr(void);

#ifdef __cplusplus
#if __cplusplus
}
#endif /* __cplusplus */
#endif /* __cplusplus */

#endif /* _LOS_SWTMR_H */