%global glib2_version 2.45.8
%global libxmlb_version 0.1.3
%global libgusb_version 0.3.5
%global libcurl_version 7.62.0
%global libjcat_version 0.1.0
%global systemd_version 231
%global json_glib_version 1.1.1
%global __requires_exclude ^%{__python3}$
%global enable_tests 1
%global enable_dummy 1
# fwupd.efi is only available on these arches
%ifarch x86_64 aarch64 riscv64 loongarch64
%global have_uefi 1
%endif
# gpio.h is only available on these arches
%ifarch x86_64 aarch64 riscv64 loongarch64
%global have_gpio 1
%endif
# flashrom is only available on these arches
%ifarch i686 x86_64 armv7hl aarch64 ppc64le riscv64 loongarch64
%global have_flashrom 0
%endif
%ifarch i686 x86_64
%global have_msr 1
%endif
# libsmbios is only available on x86
%ifarch x86_64
%global have_dell 1
%endif
# Until we actually have seen it outside x86
%ifarch i686 x86_64
%global have_thunderbolt 1
%endif
Name: fwupd
Version: 1.9.4
Release: 4
License: LGPL-2.1-or-later
Summary: Make updating firmware on Linux automatic, safe and reliable
URL: https://github.com/fwupd/fwupd
Source0: %{url}/releases/download/%{version}/%{name}-%{version}.tar.xz
Source2: http://people.freedesktop.org/~hughsient/releases/fwupd-efi-1.1.tar.xz
Source3: centos-ca-secureboot.der
Source4: centossecureboot001.der
Source5: centossecurebootca2.der
Source6: centossecureboot203.der
Source7: http://people.redhat.com/rhughes/dbx/DBXUpdate-20100307-x64.cab
Source8: http://people.redhat.com/rhughes/dbx/DBXUpdate-20140413-x64.cab
Source9: http://people.redhat.com/rhughes/dbx/DBXUpdate-20160809-x64.cab
Source10: http://people.redhat.com/rhughes/dbx/DBXUpdate-20200729-aa64.cab
Source11: http://people.redhat.com/rhughes/dbx/DBXUpdate-20200729-ia32.cab
Source12: http://people.redhat.com/rhughes/dbx/DBXUpdate-20200729-x64.cab
Source13: https://sourceforge.net/p/gnu-efi/code/ci/3.0.14/tree/gnuefi/crt0-efi-riscv64.S?format=raw#/crt0-efi-riscv64.S
Source14: https://sourceforge.net/p/gnu-efi/code/ci/3.0.14/tree/gnuefi/elf_riscv64_efi.lds?format=raw#/elf_riscv64_efi.lds
Source15: https://sourceforge.net/p/gnu-efi/code/ci/3.0.18/tree/gnuefi/crt0-efi-loongarch64.S?format=raw#/crt0-efi-loongarch64.S
Source16: https://sourceforge.net/p/gnu-efi/code/ci/3.0.18/tree/gnuefi/elf_loongarch64_efi.lds?format=raw#/elf_loongarch64_efi.lds
Patch0: fwupd-efi.patch
#https://raw.githubusercontent.com/GNOME/gnome-build-meta/37bc8931517261e359e02b2b14bffab0501e79d9/files/fwupd/riscv64.patch
Patch1: riscv64.patch
Patch2: fwupd-add-loongarch64-spoort.patch
Patch3: skip-fu-self-test-for-loongarch64.patch
Patch4: backport-compile-when-using-Pango-1.56.2.patch
BuildRequires: libcbor libcbor-devel
BuildRequires: efi-srpm-macros
BuildRequires: gettext chrpath
BuildRequires: glib2-devel >= %{glib2_version}
BuildRequires: libxmlb-devel >= %{libxmlb_version}
BuildRequires: libgcab1-devel
BuildRequires: libgudev1-devel
BuildRequires: libgusb-devel >= %{libgusb_version}
BuildRequires: libcurl-devel >= %{libcurl_version}
BuildRequires: polkit-devel >= 0.103
BuildRequires: sqlite-devel
BuildRequires: gpgme-devel libjcat-devel >= %{libjcat_version}
BuildRequires: systemd >= %{systemd_version}
BuildRequires: systemd-devel
BuildRequires: libarchive-devel
BuildRequires: gobject-introspection-devel
BuildRequires: gcab meson >= 0.61.0
# Remove build requires protobuf-c* and disable plugin logitech-bulkcontroller {
#BuildRequires: protobuf-c protobuf-c-devel tpm2-tss-devel
BuildRequires: tpm2-tss-devel
# }
BuildRequires: gi-docgen
%ifarch %{valgrind_arches}
BuildRequires: valgrind
BuildRequires: valgrind-devel
%endif
BuildRequires: python3 ninja-build python3-jinja2 python3-toml python
BuildRequires: gnutls-devel
BuildRequires: gnutls-utils
BuildRequires: help2man
BuildRequires: json-glib-devel >= %{json_glib_version}
BuildRequires: vala
BuildRequires: bash-completion
BuildRequires: git-core
%if 0%{?have_uefi}
BuildRequires: efivar-devel >= 33
BuildRequires: python3 python3-cairo python3-gobject
BuildRequires: pango-devel
BuildRequires: cairo-devel cairo-gobject-devel
BuildRequires: freetype
BuildRequires: fontconfig
BuildRequires: google-noto-sans-cjk-ttc-fonts
BuildRequires: gnu-efi-devel
BuildRequires: pesign
%endif
%if 0%{?have_dell}
BuildRequires: efivar-devel >= 33
BuildRequires: libsmbios-devel >= 2.3.0
%endif
Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
Requires: glib2%{?_isa} >= %{glib2_version}
Requires: libxmlb%{?_isa} >= %{libxmlb_version}
Requires: libgusb%{?_isa} >= %{libgusb_version}
Requires: shared-mime-info
Obsoletes: fwupd-sign < 0.1.6
Obsoletes: libebitdo < 0.7.5-3
Obsoletes: libdfu < 1.0.0
Obsoletes: fwupd-labels < 1.1.0-1
Obsoletes: dbxtool < 9
Provides: dbxtool
# optional, but a really good idea
Recommends: udisks2
Recommends: jq
%if 0%{?have_flashrom}
Recommends: %{name}-plugin-flashrom
%endif
%if 0%{?have_uefi}
Recommends: %{name}-efi
Recommends: %{name}-plugin-uefi-capsule-data
%endif
%description
%{name} aims to make updating firmware on Linux automatic, safe and reliable.
%package devel
Summary: Development package for %{name}
Requires: %{name}%{?_isa} = %{version}-%{release}
Obsoletes: libebitdo-devel < 0.7.5-3
Obsoletes: libdfu-devel < 1.0.0
%description devel
This package contains the development and installed test files for %{name}.
%package help
Summary: Documents for fwupd
Buildarch: noarch
Requires: man info
Obsoletes: dbxtool-help < 9
Provides: dbxtool-help
%description help
Man pages and other related documents for fwupd.
%prep
%setup -q -n %{name}-%{version}
%patch -P 0 -p1
%patch -P 4 -p1
mkdir -p subprojects/fwupd-efi
tar xfs %{SOURCE2} -C subprojects/fwupd-efi --strip-components=1
%ifarch riscv64
%patch1 -p1
cp %{SOURCE13} subprojects/fwupd-efi/efi/crt0
cp %{SOURCE14} subprojects/fwupd-efi/efi/lds
%endif
%ifarch loongarch64
%patch -P2 -p1
%patch -P3 -p1
cp %{SOURCE15} subprojects/fwupd-efi/efi/crt0
cp %{SOURCE16} subprojects/fwupd-efi/efi/lds
%endif
sed -ri '1s=^#!/usr/bin/(env )?python3=#!%{__python3}=' \
contrib/ci/*.py \
contrib/firmware_packager/*.py \
contrib/*.py \
contrib/standalone-installer/assets/*.py \
contrib/standalone-installer/*.py \
plugins/dfu/contrib/*.py \
plugins/uefi-capsule/make-images.py \
po/test-deps
%build
%meson \
-Ddocs=disabled \
%if 0%{?enable_tests}
-Dtests=true \
%else
-Dtests=false \
%endif
%if 0%{?enable_dummy}
-Dplugin_dummy=true \
%else
-Dplugin_dummy=false \
%endif
%if 0%{?have_flashrom}
-Dplugin_flashrom=enabled \
%else
-Dplugin_flashrom=disabled \
%endif
%if 0%{?have_msr}
-Dplugin_msr=enabled \
%else
-Dplugin_msr=disabled \
%endif
%if 0%{?have_gpio}
-Dplugin_gpio=enabled \
%else
-Dplugin_gpio=disabled \
%endif
%if 0%{?have_uefi}
-Dplugin_uefi_capsule=enabled \
-Dplugin_uefi_pk=enabled \
%ifarch x86_64
-Dfwupd-efi:efi_sbat_distro_id="rhel" \
-Dfwupd-efi:efi_sbat_distro_summary="Red Hat Enterprise Linux" \
-Dfwupd-efi:efi_sbat_distro_pkgname="%{name}" \
-Dfwupd-efi:efi_sbat_distro_version="%{version}" \
-Dfwupd-efi:efi_sbat_distro_url="mail:secalert@redhat.com" \
-Dfwupd-efi:efi-libdir="/usr/lib64" \
%endif
-Dplugin_tpm=disabled \
%else
-Dplugin_uefi_capsule=disabled \
-Dplugin_uefi_pk=disabled \
-Dplugin_tpm=disabled \
%endif
%if 0%{?have_dell}
-Dplugin_dell=enabled \
%else
-Dplugin_dell=disabled \
%endif
-Dplugin_modem_manager=disabled \
-Dman=true \
-Dbluez=enabled \
-Dplugin_powerd=disabled \
-Dplugin_logitech_bulkcontroller=disabled \
-Dsupported_build=enabled
%meson_build
%if 0%{?enable_tests}
%check
%meson_test
%endif
%install
%meson_install
mkdir -p %{buildroot}/%{_datadir}/dbxtool
install %{SOURCE7} %{SOURCE8} %{SOURCE9} %{SOURCE10} %{SOURCE11} %{SOURCE12} %{buildroot}/%{_datadir}/dbxtool
# sign fwupd.efi loader
%ifarch x86_64
%global efiarch x64
%global fwup_efi_fn %{buildroot}%{_libexecdir}/%{name}/efi/%{name}x64.efi
%pesign -s -i %{fwup_efi_fn} -o %{fwup_efi_fn}.tmp -a %{SOURCE3} -c %{SOURCE4} -n centossecureboot001
%pesign -s -i %{fwup_efi_fn}.tmp -o %{fwup_efi_fn}.signed -a %{SOURCE5} -c %{SOURCE6} -n centossecureboot203
rm -fv %{fwup_efi_fn}.tmp
%endif
mkdir -p --mode=0700 $RPM_BUILD_ROOT%{_localstatedir}/lib/fwupd/gnupg
# workaround for https://bugzilla.redhat.com/show_bug.cgi?id=1757948
mkdir -p $RPM_BUILD_ROOT%{_localstatedir}/cache/fwupd
mkdir -p %{buildroot}%{_datadir}/doc
mkdir -p %{buildroot}%{_datadir}/doc/fwupd
cp -r libfwupd* %{buildroot}%{_datadir}/doc/
cp -r *%{_vendor}-linux*/libfwupd* %{buildroot}%{_datadir}/doc/fwupd/
sed -i '/DynamicUser=yes/d' %{buildroot}/usr/lib/systemd/system/fwupd-refresh.service
%find_lang %{name}
for i in $(ls %{buildroot}/usr/libexec/installed-tests/fwupd/ |grep -v "fwupd.sh"); do chrpath -d %{buildroot}/usr/libexec/installed-tests/fwupd/$i ;done
chrpath -d %{buildroot}/usr/share/doc/fwupd/libfwupdplugin/fwupdplugin-self-test
chrpath -d %{buildroot}/usr/share/doc/fwupd/libfwupdplugin/libfwupdplugin.so
chrpath -d %{buildroot}/usr/share/doc/fwupd/libfwupd/fwupd-self-test
chrpath -d %{buildroot}/usr/share/doc/fwupd/libfwupd/fwupd-context-test
chrpath -d %{buildroot}/usr/share/doc/fwupd/libfwupd/fwupd-thread-test
chrpath -d %{buildroot}/usr/libexec/fwupd/fwupd
chrpath -d %{buildroot}/usr/libexec/fwupd/fwupdoffline
chrpath -d %{buildroot}/%{_libdir}/fwupd-%{version}/libfwupdengine.so
chrpath -d %{buildroot}/%{_libdir}/fwupd-%{version}/libfwupdutil.so
for b in $(ls %{buildroot}/usr/bin/ ); do chrpath -d %{buildroot}/usr/bin/$b ;done
mkdir -p %{buildroot}/etc/ld.so.conf.d
echo "%{_libdir}/%{name}-%{version}" > %{buildroot}/etc/ld.so.conf.d/%{name}-%{_arch}.conf
echo "%{_libdir}/%{name}-%{version}" > %{buildroot}/etc/ld.so.conf.d/%{name}-devel-%{_arch}.conf
%post
/sbin/ldconfig
%systemd_post fwupd.service
# change vendor-installed remotes to use the default keyring type
for fn in /etc/fwupd/remotes.d/*.conf; do
if grep -q "Keyring=gpg" "$fn"; then
sed -i 's/Keyring=gpg/#Keyring=pkcs/g' "$fn";
fi
done
%preun
%systemd_preun fwupd.service
%postun
/sbin/ldconfig
%systemd_postun_with_restart fwupd.service
%post devel
/sbin/ldconfig
%postun devel
/sbin/ldconfig
%files -f %{name}.lang
%doc README.md
%license COPYING
%config(noreplace)%{_sysconfdir}/fwupd/fwupd.conf
%dir %{_libexecdir}/fwupd
%{_libexecdir}/fwupd/fwupd
# depending on compiler behavior
# currently skipped from building if compiled by llvm
%if "%toolchain" == "clang"
%else
%ifarch i686 x86_64
%{_libexecdir}/fwupd/fwupd-detect-cet
%endif
%endif
%{_libexecdir}/fwupd/fwupdoffline
%if 0%{?have_uefi}
%{_bindir}/dbxtool
%endif
%{_bindir}/fwupdmgr
%{_bindir}/fwupdtool
%dir %{_sysconfdir}/fwupd
%dir %{_sysconfdir}/fwupd/bios-settings.d
%config%(noreplace)%{_sysconfdir}/fwupd/bios-settings.d/README.md
%dir %{_sysconfdir}/fwupd/remotes.d
%if 0%{?have_dell}
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/dell-esrt.conf
%endif
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/lvfs.conf
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/lvfs-testing.conf
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/vendor.conf
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/vendor-directory.conf
%config(noreplace)%{_sysconfdir}/pki/fwupd
%{_sysconfdir}/pki/fwupd-metadata
%if 0%{?have_msr}
/usr/lib/modules-load.d/fwupd-msr.conf
%endif
%{_datadir}/dbus-1/system.d/org.freedesktop.fwupd.conf
%{_datadir}/bash-completion/completions/fwupdmgr
%{_datadir}/bash-completion/completions/fwupdtool
%{_datadir}/fish/vendor_completions.d/fwupdmgr.fish
%{_datadir}/fwupd/metainfo/org.freedesktop.fwupd*.metainfo.xml
%if 0%{?have_dell}
%{_datadir}/fwupd/remotes.d/dell-esrt/metadata.xml
%endif
%{_datadir}/fwupd/remotes.d/vendor/firmware/README.md
%{_datadir}/dbus-1/interfaces/org.freedesktop.fwupd.xml
%{_datadir}/polkit-1/actions/org.freedesktop.fwupd.policy
%{_datadir}/polkit-1/rules.d/org.freedesktop.fwupd.rules
%{_datadir}/dbus-1/system-services/org.freedesktop.fwupd.service
%{_datadir}/metainfo/org.freedesktop.fwupd.metainfo.xml
%{_datadir}/icons/hicolor/scalable/apps/org.freedesktop.fwupd.svg
%{_datadir}/fwupd/firmware_packager.py
%{_datadir}/fwupd/simple_client.py
%{_datadir}/fwupd/add_capsule_header.py
%{_datadir}/fwupd/install_dell_bios_exe.py
%{_unitdir}/fwupd-offline-update.service
%{_unitdir}/fwupd.service
%{_unitdir}/fwupd-refresh.service
%{_unitdir}/fwupd-refresh.timer
%{_presetdir}/fwupd-refresh.preset
%{_unitdir}/system-update.target.wants/
%dir %{_localstatedir}/lib/fwupd
%dir %{_localstatedir}/cache/fwupd
%dir %{_datadir}/fwupd/quirks.d
%{_datadir}/fwupd/quirks.d/builtin.quirk.gz
%if 0%{?have_uefi}
%{_sysconfdir}/grub.d/35_fwupd
%endif
%{_libdir}/libfwupd.so.2*
%{_libdir}/girepository-1.0/Fwupd-2.0.typelib
/usr/lib/udev/rules.d/*.rules
/usr/lib/systemd/system-shutdown/fwupd.shutdown
%dir %{_libdir}/fwupd-%{version}
%{_libdir}/fwupd-%{version}/libfwupd*.so
%ghost %{_localstatedir}/lib/fwupd/gnupg
%if 0%{?have_flashrom}
%files plugin-flashrom
%{_libdir}/fwupd-%{version}/libfu_plugin_flashrom.so
%endif
%if 0%{?have_uefi}
%{_datadir}/fwupd/uefi-capsule-ux.tar.xz
%{_libexecdir}/%{name}/efi/*.efi
%ifarch x86_64
%{_libexecdir}/%{name}/efi/*.efi.signed
%endif
%endif
%dir %{_datadir}/dbxtool
%{_datadir}/dbxtool/DBXUpdate-20100307-x64.cab
%{_datadir}/dbxtool/DBXUpdate-20140413-x64.cab
%{_datadir}/dbxtool/DBXUpdate-20160809-x64.cab
%{_datadir}/dbxtool/DBXUpdate-20200729-aa64.cab
%{_datadir}/dbxtool/DBXUpdate-20200729-ia32.cab
%{_datadir}/dbxtool/DBXUpdate-20200729-x64.cab
%config(noreplace) /etc/ld.so.conf.d/%{name}-%{_arch}.conf
%files devel
%{_datadir}/gir-1.0/Fwupd-2.0.gir
%{_datadir}/doc/fwupd/libfwupdplugin
%{_datadir}/doc/fwupd/libfwupd
%{_datadir}/doc/libfwupdplugin
%{_datadir}/doc/libfwupd
%{_datadir}/vala/vapi
%{_includedir}/fwupd-1
%{_libdir}/libfwupd*.so
%{_libdir}/pkgconfig/fwupd.pc
%{_libdir}/pkgconfig/fwupd-efi.pc
%if 0%{?enable_tests}
%{_datadir}/fwupd/host-emulate.d/*.json.gz
%dir %{_datadir}/installed-tests/fwupd
%{_datadir}/installed-tests/fwupd/tests/*
%{_datadir}/installed-tests/fwupd/fwupd-tests.xml
%{_datadir}/installed-tests/fwupd/*.test
%{_datadir}/installed-tests/fwupd/*.cab
%{_datadir}/installed-tests/fwupd/*.sh
%{_datadir}/installed-tests/fwupd/*.zip
%if 0%{?have_uefi}
%{_datadir}/installed-tests/fwupd/efi
%endif
%{_datadir}/installed-tests/fwupd/chassis_type
%{_datadir}/installed-tests/fwupd/sys_vendor
%{_datadir}/fwupd/device-tests/*.json
%{_libexecdir}/installed-tests/fwupd/*
%dir %{_sysconfdir}/fwupd/remotes.d
%config(noreplace)%{_sysconfdir}/fwupd/remotes.d/fwupd-tests.conf
%endif
/etc/ld.so.conf.d/%{name}-devel-%{_arch}.conf
%files help
%{_mandir}/man1/*
%{_mandir}/man5/*
%{_mandir}/man8/*
%changelog
* Sat Oct 11 2025 Funda Wang <fundawang@yeah.net> - 1.9.4-4
- fix build with recent pango
- drop uselss ld.conf for documentation files
* Wed Aug 13 2025 Qin Fandong <qinfandong@kylinos.cn> - 1.9.4-3
- Remove build requires protobuf-c* and disable plugin logitech-bulkcontroller
which to upgrade the firmware on Logitech Video Collaboration products.
* Thu Aug 07 2025 Funda Wang <fundawang@yeah.net> - 1.9.4-2
- __pycache__ no long exists since 25.09
* Wed May 14 2025 yaoxin <1024769339@qq.com> - 1.9.4-1
- Update to 1.9.4:
* Do not add gl32xx disk partitions as extra devices
* Do not assume the logical block size is always 0x200
* Ensure the AppStream ID is set on historical releases
* Fix a possible CFU crash when adding modules
* Fix 'fwupdmgr get-history --json' output to only show one release
* Fix 'fwupdmgr modify-remote' on ChromeOS
* Fix incorrect OEM trusted reports flags being set when not matching
* Fix regression in returning device history with libxmlb 0.3.12
* Fix some Wacom hardware by only attempting retries for the busy error state
* Fix transaction timed out issue for T99W373 QDU device
* Mon Dec 30 2024 Wenlong Zhang <zhangwenlong@loongson.cn> - 1.8.17-8
- skip fu-self-test for loongarch64
* Wed Sep 25 2024 laokz <zhangkai@iscas.ac.cn> - 1.8.17-7
- Let valgrind depend on system architecture macro
* Thu Aug 15 2024 xu_ping <707078654@qq.com> - 1.8.17-6
- Remove rpath for libfwupdengine.so and libfwupdutil.so.
* Mon May 13 2024 Huang Yang <huangyang@loongson.cn> - 1.8.17-5
- add loongarch64 support
* Tue May 07 2024 chendexi <chendexi@kylinos.cn> - 1.8.17-4
- Modify the unsupported macro python3 to __python3
* Wed Mar 13 2024 jchzhou <zhoujiacheng@iscas.ac.cn> - 1.8.17-3
- Fix the conditional at L346: replace expected toolchain value to 'clang'
* Wed Mar 13 2024 panchenbo <panchenbo@kylinsec.com.cn> - 1.8.17-2
- modify openEuler to %{_vendor}
* Wed Oct 18 2023 yaoxin <yao_xin001@hoperun.com> - 1.8.17-1
- Upgrade to 1.8.17
* Mon Jul 10 2023 misaka00251 <liuxin@iscas.ac.cn> - 1.8.6-6
- Fix build on riscv64
- from @jchzhou: skip packaging fwupd-detect-cet if compiled with llvm
* Fri Mar 10 2023 zhouwenpei <zhouwenpei1@h-partners.com> - 1.8.6-5
- remove bluez require
* Fri Mar 3 2023 liyanan <liyanan32@h-partners.com> - 1.8.6-4
- Remove rpath
* Thu Mar 02 2023 yaoxin <yaoxin30@h-partners.com> - 1.8.6-3
- Fix fwupd-refresh.service start failure
* Mon Feb 27 2023 liyanan <liyanan32@-partners.com> - 1.8.6-2
- Fix fwupd libjcat dbxtool file conflicts
* Tue Nov 1 2022 huyab<1229981468@qq.com> - 1.8.6-1
- update version to 1.8.6-1
* Thu Dec 01 2022 yaoxin <yaoxin30@h-partners.com> - 1.5.8-5
- Resolve fwupd upgrade and downgrade error
* Thu Dec 01 2022 Ge Wang <wangge20@h-partners.com> - 1.5.8-4
- Fix fwupd-refresh service start failure
* Thu Nov 10 2022 caodongxia <caodongxia@h-partners.com> - 1.5.8-3
- Fix compiling with new versions of efivar
* Mon Jun 20 2022 fushanqing <fushanqing@kylinos.cn> - 1.5.8-2
- Remove the python installation dependency of fwupd
* Mon Jun 17 2022 lin zhang <lin.zhang@turbolinux.com.cn> - 1.5.8-1
- Upgrade to 1.5.8
* Thu May 28 2015 Richard Hughes <richard@hughsie.com> 0.1.3-1
- New upstream release
- Coldplug the devices before acquiring the well known name
- Run the offline actions using systemd when required
- Support OpenHardware devices using the fwupd vendor extensions
* Wed Apr 22 2015 Richard Hughes <richard@hughsie.com> 0.1.2-1
- New upstream release
- Only allow signed firmware to be upgraded without a password
* Mon Mar 23 2015 Richard Hughes <richard@hughsie.com> 0.1.1-1
- New upstream release
- Add a 'get-updates' command to fwupdmgr
- Add and document the offline-update lifecycle
- Create a libfwupd shared library
- Create runtime directories if they do not exist
- Do not crash when there are no devices to return
* Mon Mar 16 2015 Richard Hughes <richard@hughsie.com> 0.1.0-1
- First release
