Closed
CVE-2026-97876 #197
openeuler-ci-botAdd on  Oct 2Closed at  2 days ago
openeuler-ci-bot
openeuler-ci-botCollaborators
Oct 2 Create

一、漏洞信息
漏洞编号:CVE-2026-97876
漏洞归属组件:grub2
漏洞归属的版本:2.04,2.06,2.12
CVSS评分:
BaseScore:6.4 Medium
Vector:CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H
漏洞简述:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.
漏洞公开时间:2026-10-02 18:53:50
漏洞创建时间:2026-10-02 19:28:39
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2026-97876

更多参考(点击展开)
参考来源 参考链接 来源链接
https://gitlab.freedesktop.org/gnu-grub/grub/-/commit/26beaa3b2720fefdc4d04c1ae209b776fe6848d6
https://www.first.org/epss
https://github.com/secwatch-io/viocam-poc
https://www.openwall.com/lists/oss-security/2026/09/13/5
https://cwe.mitre.org/data/definitions/78.html
https://nvd.nist.gov/vuln/detail/CVE-2026-97876

漏洞分析指导链接:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
七彩瞬析开源风险感知平台
漏洞补丁信息:

详情(点击展开)
影响的包 修复版本 修复补丁 问题引入补丁 来源
https://gitlab.freedesktop.org/gnu-grub/grub/-/commit/26beaa3b2720fefdc4d04c1ae209b776fe6848d6 circl

二、漏洞分析结构反馈
影响性分析说明:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.
openEuler评分:
6.4
Vector:CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master(2.12):受影响
2.openEuler-20.03-LTS-SP4(2.04):不受影响
3.openEuler-22.03-LTS-SP4(2.06):不受影响
4.openEuler-24.03-LTS-Next(2.12):受影响
5.openEuler-24.03-LTS-SP1(2.12):受影响
6.openEuler-24.03-LTS-SP3(2.12):受影响
7.openEuler-24.03-LTS-SP4(2.12):受影响
8.openEuler-24.03-LTS(2.12):受影响
9.openEuler-24.03-LTS-SP2(2.12):受影响

修复是否涉及abi变化(是/否):
1.master(2.12):否
2.openEuler-20.03-LTS-SP4(2.04):否
3.openEuler-22.03-LTS-SP4(2.06):否
4.openEuler-24.03-LTS-Next(2.12):否
5.openEuler-24.03-LTS-SP1(2.12):否
6.openEuler-24.03-LTS-SP3(2.12):否
7.openEuler-24.03-LTS-SP4(2.12):否

原因说明:
1.master(2.12):正常修复
2.openEuler-20.03-LTS-SP4(2.04):不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4(2.06):不受影响-漏洞代码不存在
4.openEuler-24.03-LTS-Next(2.12):正常修复
5.openEuler-24.03-LTS-SP1(2.12):正常修复
6.openEuler-24.03-LTS-SP3(2.12):正常修复
7.openEuler-24.03-LTS-SP4(2.12):正常修复

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Oct 2 Added label: CVE/UNFIXED
openeuler-ci-bot
openeuler-ci-botCollaborators
Oct 2 Comments:

issue处理注意事项:
1. 提交正常修复分支的修复PR时,必须关联当前issue,否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复;
注: 内容的关键词(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.


影响性分析说明:

openEuler评分: (评分和向量)

受影响版本排查(受影响/不受影响):
1.master(2.12):
2.openEuler-20.03-LTS-SP4(2.04):
3.openEuler-22.03-LTS-SP4(2.06):
4.openEuler-24.03-LTS-Next(2.12):
5.openEuler-24.03-LTS-SP1(2.12):
6.openEuler-24.03-LTS-SP3(2.12):
7.openEuler-24.03-LTS-SP4(2.12):

修复是否涉及abi变化(是/否):
1.master(2.12):
2.openEuler-20.03-LTS-SP4(2.04):
3.openEuler-22.03-LTS-SP4(2.06):
4.openEuler-24.03-LTS-Next(2.12):
5.openEuler-24.03-LTS-SP1(2.12):
6.openEuler-24.03-LTS-SP3(2.12):
7.openEuler-24.03-LTS-SP4(2.12):

原因说明:
1.master(2.12):
2.openEuler-20.03-LTS-SP4(2.04):
3.openEuler-22.03-LTS-SP4(2.06):
4.openEuler-24.03-LTS-Next(2.12):
5.openEuler-24.03-LTS-SP1(2.12):
6.openEuler-24.03-LTS-SP3(2.12):
7.openEuler-24.03-LTS-SP4(2.12):


原因说明填写请参考下方表格(注意:版本是否受影响和版本的原因说明必须对应,例如master版本分支受影响,那原因说明只能是受影响对应的原因之一!):

分支状态
原因说明 使用场景
受影响 正常修复 受影响且需要修复(包含升级版本修复)的漏洞;
受影响且已经修复的漏洞(历史修复PR也需要关联issue);
若因特殊原因无法修复,应修改原因说明为【不修复-特殊原因】,并在安委会备案相关情况。
受影响 暂不修复-漏洞仍在分析中 已关注到相关漏洞,正在处理,未明确漏洞影响和修复方案。
受影响 暂不修复-暂无解决方案或补丁 当前没有可用的修复或补救措施。【影响性分析】中应包含有关为什么没有修复或补救措施的详细说明、上游相关PR等。
受影响 不修复-超出修复范围 没有漏洞的修复计划。当版本停维、软件包宣布生命周期终止或弃用使用。
受影响 不修复-特殊原因导致不再修复 如存在其他特殊情况不修复相关漏洞,或评估后无法升级修复,应在openEuler社区安全委员会例会进行说明备案。
【影响性分析】中应包含不发布修复的详细说明、特殊情况还应有安委会会议纪要。
不受影响 不受影响-组件不存在 软件不受影响,因为易受攻击的组件不在产品中。
不受影响 不受影响-已有内置的内联控制或缓解措施 内置的内联控制或缓解措施可防止攻击者利用漏洞
不受影响 不受影响-漏洞代码不能被攻击者触发 易受攻击的组件存在,并且该组件包含易受攻击的代码。但是,易受攻击的代码的使用方式使得攻击者无法进行任何预期的攻击。
不受影响 不受影响-漏洞代码不在执行路径 易受影响的代码在执行过程中不可访问,包括产品的非预期状态。产品不使用也不执行的组件。
不受影响 不受影响-漏洞代码不存在 产品不受影响,因为漏洞背后的代码在产品中不存在。与component_not_present不同的是,有问题的组件存在,但由于某种原因(例如安全的编译器选项)使漏洞的特定代码不存在于组件中。

issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Oct 2 Assign openeuler-ci-bot、overweight、zhuchunyi、zhangqiumiao、han_hui_hui、shenyangyang as responsible person
openeuler-ci-botopeneuler-ci-botCollaborators
Oct 2 Added label: sig/sig-OS-Builder
openeuler-ci-bot
openeuler-ci-botCollaborators
Oct 2 Comments:

Welcome To openEuler Community

Hey @openeuler-ci-bot , thanks for your contribution to the community.

Bot Usage Manual

I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands. You can self-configure the PR merge rules for this repository. For more details, please refer to Here.

Contact Guide

If you have any questions, please contact the SIG: sig-OS-Builder ,
and any of the maintainers: @han_hui_hui, @overweight, @shenyangyang, @zhangqiumiao, @zhuchunyi ,
and any of the committers: @ouuleilei, @yue-yuankun, @zhangqiumiao .

likedislike
openeuler-ci-bot
openeuler-ci-botCollaborators
Oct 2 Comments:
参考网址 关联pr 状态 补丁链接
https://www.opencve.io/cve/CVE-2026-97876NoneNonehttps://gitlab.freedesktop.org/gnu-grub/grub/-/commit/26beaa3b2720fefdc4d04c1ae209b776fe6848d6
https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2026-97876
https://security-tracker.debian.org/tracker/CVE-2026-97876
http://www.cnnvd.org.cn/web/vulnerability/queryLds.tag?qcvCnnvdid=CVE-2026-97876
https://nvd.nist.gov/vuln/detail/CVE-2026-97876
https://ubuntu.com/security/CVE-2026-97876NoneNonehttps://discourse.ubuntu.com/c/project

说明:补丁链接仅供初步排查参考,实际可用性请人工再次确认,补丁下载验证可使用CVE补丁工具。
若补丁不准确,烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息,便于我们不断优化工具,不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Oct 2 Modify description of issue
5 event messages are collapsed here。 See more
openeuler-ci-botopeneuler-ci-botCollaborators
19 days ago Associated pull request
zhaoyonghao10
zhaoyonghao10
14 days ago Comments:

/branches

likedislike
zhaoyonghao10zhaoyonghao10
13 days ago Associated pull request
openeuler-ci-botopeneuler-ci-botCollaborators
9 days ago Associated pull request
zhaoyonghao10
zhaoyonghao10
6 days ago Comments:

/branches

likedislike
xiaoo_robot
xiaoo_robot
6 days ago Comments:

正在自动化处理任务,任务编号:TASK-gitcode__grub2-197-20261113160144

⏳ 进度更新 (16:16): 已运行 15 分钟 | 当前阶段: Step 4/8 源码影响性分析

✅ 任务结束 (用时: 17分钟)

likedislike
xiaoo_robot
xiaoo_robot
6 days ago Comments:

【任务 #197 · master/openEuler-20.03-LTS-SP4/openEuler-22.03-LTS-SP4/openEuler-24.03-LTS/openEuler-24.03-LTS-Next/openEuler-24.03-LTS-SP1/openEuler-24.03-LTS-SP2/openEuler-24.03-LTS-SP3】CVE-2026-97876

一、是否受影响

结论:不受影响。

原因:CVE-2026-97876 的自有补丁经 Step 4 源码影响性分析判为 NOT_APPLICABLE,漏洞代码不存在于本版本源码,无需修复。

各分支状态如下:

  • master(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-20.03-LTS-SP4(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-22.03-LTS-SP4(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-24.03-LTS(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-24.03-LTS-Next(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-24.03-LTS-SP1(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-24.03-LTS-SP2(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)
  • openEuler-24.03-LTS-SP3(2.12):不受影响(漏洞代码不存在,补丁 NOT_APPLICABLE)

二、是否有修复补丁

上游社区已有修复补丁:
https://gitlab.freedesktop.org/gnu-grub/grub/-/commit/26beaa3b2720fefdc4d04c1ae209b776fe6848d6.patch

三、补丁适配情况

无适配。该补丁经源码影响性分析为 NOT_APPLICABLE,漏洞代码不存在于本版本源码,无需适配与应用,也无前置补丁。

四、是否提交 PR

未提交 PR。由于各目标分支均不受影响,无需修复,故无关联 PR。

──────── 复制以下内容回填 issue ────────
受影响版本排查(受影响/不受影响):
1.master(2.12): 不受影响
2.openEuler-20.03-LTS-SP4(2.12): 不受影响
3.openEuler-22.03-LTS-SP4(2.12): 不受影响
4.openEuler-24.03-LTS(2.12): 不受影响
5.openEuler-24.03-LTS-Next(2.12): 不受影响
6.openEuler-24.03-LTS-SP1(2.12): 不受影响
7.openEuler-24.03-LTS-SP2(2.12): 不受影响
8.openEuler-24.03-LTS-SP3(2.12): 不受影响
ABI 变化:否
原因说明:
1.不受影响-漏洞代码不存在
2.不受影响-漏洞代码不存在
3.不受影响-漏洞代码不存在
4.不受影响-漏洞代码不存在
5.不受影响-漏洞代码不存在
6.不受影响-漏洞代码不存在
7.不受影响-漏洞代码不存在
8.不受影响-漏洞代码不存在
────────────────────────────────────────

likedislike
zhaoyonghao10
zhaoyonghao10
3 days ago Comments:

/branches master

likedislike
xiaoo_robot
xiaoo_robot
3 days ago Comments:

正在自动化处理任务,任务编号:TASK-gitcode__grub2-197-20261116154806,指定分支:master

⏳ 进度更新 (17:28): 已运行 100 分钟 | 当前阶段: Step 6/8 修改 Spec + rpmbuild 验证

✅ 任务结束 (用时: 103分钟)

likedislike
xiaoo_robot
xiaoo_robot
3 days ago Comments:

【任务 #197 · master】CVE-2026-97876

一、是否受影响

结论:受影响。

  • master(2.12):受影响

原因:漏洞本质为 lockdown/Secure Boot 下未拒绝调用者提供的裸 serial port/mmio 地址,该漏洞代码在 grub-2.12 源码中完整存在。调用链为 grub_cmd_serial(serial.c:240)构造 port%lx/mmio, 设备名(serial.c:266)→ grub_serial_find(serial.c:144)解析裸地址并调用 grub_serial_ns8250_add_port/add_mmio(serial.c:161,208)→ ns8250.c:350/404 在无任何 lockdown 检查下直接探测/编程该地址(ns8250.c:374 grub_outb(0x5a, port+UART_SR)),与 CVE 描述的绕过模式一致;lockdown API(include/grub/lockdown.h:25,32)存在,补丁未被预先应用。

二、是否有修复补丁

有上游修复补丁:https://gitlab.freedesktop.org/gnu-grub/grub/-/commit/26beaa3b2720fefdc4d04c1ae209b776fe6848d6.patch

三、补丁适配情况

已对本分支完成适配(backport-CVE-2026-97876.patch,状态:adapted,置信度:high)。

  • 冲突原因:原补丁共 14 个 hunk / 6 个文件,其中 3 个 hunk 为 pl011 驱动专属(pl011.c、pl011.h 整节及 serial.c 中 pl011 mmio 调用点);pl011 驱动为 grub-2.12 发布后上游新增,本版本全树(含 Makefile.core.def)零匹配,属版本差异(VERSION_GAP)而非缺失前置补丁。
  • 适配内容:剔除 3 个 pl011 专属 hunk(grub-2.12 不存在 pl011 攻击面,不影响修复效果);其余 11 个 hunk 变更行与原补丁逐字节一致、仅行号偏移,直接套用。核心修复逻辑完整保真:新增 grub_serial_reject_untrusted_address()(serial.c 定义、serial.h:191 声明)、ns8250 驱动归属检查(p->driver == &grub_ns8250_driver)、SPCR 平台表路径 trusted=true、port<hex>/mmio,<hex> 调用方原始地址路径 trusted=false 并在探测/编程硬件前受 lockdown 拦截、grub_cmd_serial 传播 GRUB_ERR_ACCESS_DENIED;所需符号(grub_is_lockdown/GRUB_LOCKDOWN_ENABLED、GRUB_ERR_ACCESS_DENIED 等)均在基线验证存在。
  • 落地验证:适配后补丁已应用到源码树(commit da45cce,父提交为基线 8f52320),git diff --stat 为 4 个文件 +78/−13;独立 worktree 前向验证 git apply --check 与 git am 均通过,应用后树与源码树 HEAD 完全一致。

四、是否提交 PR

暂未提交 PR。

五、流水线失败原因

流水线失败于 Step 5 补丁适配:AI 适配产物虽已通过源码树级前向验证,但 spec 级 rpmbuild -bp 验证(Patch#6000)连续 3 次失败——patch --dry-run 在 grub-core/term/ns8250-spcr.c 报冲突、git am 返回码 128——3 次回退重新适配后仍未通过,超过最大重试次数,流水线终止。

──────── 复制以下内容回填 issue ────────
受影响版本排查(受影响/不受影响):
1.master(2.12): 受影响
ABI 变化:否
原因说明:
1.正常修复
────────────────────────────────────────

likedislike
zhaoyonghao10zhaoyonghao10
2 days ago Associated pull request
zhaoyonghao10
zhaoyonghao10
2 days ago Comments:

受影响版本排查(受影响/不受影响):
1.master(2.12):受影响
2.openEuler-20.03-LTS-SP4(2.12): 不受影响
3.openEuler-22.03-LTS-SP4(2.12): 不受影响
4.openEuler-24.03-LTS(2.12): 受影响
5.openEuler-24.03-LTS-Next(2.12): 受影响
6.openEuler-24.03-LTS-SP1(2.12): 受影响
7.openEuler-24.03-LTS-SP2(2.12): 受影响
8.openEuler-24.03-LTS-SP3(2.12): 受影响
ABI 变化:否
原因说明:
1.NA
2.不受影响-漏洞代码不存在
3.不受影响-漏洞代码不存在
4.NA
5.NA
6.NA
7.NA
8.NA

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago changed custom priority from 无优先级 to 次要
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago Modify description of issue
openeuler-ci-bot
openeuler-ci-botCollaborators
2 days ago Comments:

经过cve-manager解析,部分字段填写错误,如红色字体所示:

影响性分析说明:
(请填写此字段)

openEuler评分: (评分和向量)
(请填写此字段)

受影响版本排查(受影响/不受影响):
1.master:受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:不受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP2:受影响
8.openEuler-24.03-LTS-SP3:受影响
9.openEuler-24.03-LTS-SP4:(请填写此字段)

修复是否涉及abi变化(是/否):
1.master:(请填写此字段)
2.openEuler-20.03-LTS-SP4:(请填写此字段)
3.openEuler-22.03-LTS-SP4:(请填写此字段)
4.openEuler-24.03-LTS-Next:(请填写此字段)
5.openEuler-24.03-LTS-SP1:(请填写此字段)
6.openEuler-24.03-LTS-SP3:(请填写此字段)
7.openEuler-24.03-LTS-SP4:(请填写此字段)

原因说明:
1.master:(请填写此字段)
2.openEuler-20.03-LTS-SP4:(请填写此字段)
3.openEuler-22.03-LTS-SP4:(请填写此字段)
4.openEuler-24.03-LTS-Next:(请填写此字段)
5.openEuler-24.03-LTS-SP1:(请填写此字段)
6.openEuler-24.03-LTS-SP3:(请填写此字段)
7.openEuler-24.03-LTS-SP4:(请填写此字段)

likedislike
zhaoyonghao10
zhaoyonghao10
2 days ago Comments:

影响性分析说明:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.

openEuler评分: (评分和向量)
BaseScore:6.4 Medium
Vector:CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:不受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP2:受影响
8.openEuler-24.03-LTS-SP3:受影响
9.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS-Next:否
5.openEuler-24.03-LTS-SP1:否
6.openEuler-24.03-LTS-SP3:否
7.openEuler-24.03-LTS-SP4:否

原因说明:
1.master:NA
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:不受影响-漏洞代码不存在
4.openEuler-24.03-LTS-Next:NA
5.openEuler-24.03-LTS-SP1:NA
6.openEuler-24.03-LTS-SP3:NA
7.openEuler-24.03-LTS-SP4:NA

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago changed custom priority from 次要 to 次要
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago Modify description of issue
openeuler-ci-bot
openeuler-ci-botCollaborators
2 days ago Comments:

经过cve-manager解析,部分字段填写错误,如红色字体所示:

影响性分析说明:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when bootin...

openEuler评分: (评分和向量)
6.4
CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:不受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP2:受影响
8.openEuler-24.03-LTS-SP3:受影响
9.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS-Next:否
5.openEuler-24.03-LTS-SP1:否
6.openEuler-24.03-LTS-SP3:否
7.openEuler-24.03-LTS-SP4:否

原因说明:
1.master:(请填写此字段)
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:不受影响-漏洞代码不存在
4.openEuler-24.03-LTS-Next:(请填写此字段)
5.openEuler-24.03-LTS-SP1:(请填写此字段)
6.openEuler-24.03-LTS-SP3:(请填写此字段)
7.openEuler-24.03-LTS-SP4:(请填写此字段)

likedislike
zhaoyonghao10
zhaoyonghao10
2 days ago Comments:

影响性分析说明:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.

openEuler评分: (评分和向量)
BaseScore:6.4 Medium
Vector:CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:不受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP2:受影响
8.openEuler-24.03-LTS-SP3:受影响
9.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS-Next:否
5.openEuler-24.03-LTS-SP1:否
6.openEuler-24.03-LTS-SP3:否
7.openEuler-24.03-LTS-SP4:否

原因说明:
1.master:受影响修复
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:不受影响-漏洞代码不存在
4.openEuler-24.03-LTS-Next:受影响修复
5.openEuler-24.03-LTS-SP1:受影响修复
6.openEuler-24.03-LTS-SP3:受影响修复
7.openEuler-24.03-LTS-SP4:受影响修复

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago changed custom priority from 次要 to 次要
openeuler-ci-bot
openeuler-ci-botCollaborators
2 days ago Comments:

经过cve-manager解析,部分字段填写错误,如红色字体所示:

影响性分析说明:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when bootin...

openEuler评分: (评分和向量)
6.4
CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:不受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP2:受影响
8.openEuler-24.03-LTS-SP3:受影响
9.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS-Next:否
5.openEuler-24.03-LTS-SP1:否
6.openEuler-24.03-LTS-SP3:否
7.openEuler-24.03-LTS-SP4:否

原因说明:
1.master:(请填写此字段)
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:不受影响-漏洞代码不存在
4.openEuler-24.03-LTS-Next:(请填写此字段)
5.openEuler-24.03-LTS-SP1:(请填写此字段)
6.openEuler-24.03-LTS-SP3:(请填写此字段)
7.openEuler-24.03-LTS-SP4:(请填写此字段)

likedislike
zhaoyonghao10
zhaoyonghao10
2 days ago Comments:

影响性分析说明:
A local attacker with control over GRUB s configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.

openEuler评分: (评分和向量)
BaseScore:6.4 Medium
Vector:CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:不受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP2:受影响
8.openEuler-24.03-LTS-SP3:受影响
9.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS-Next:否
5.openEuler-24.03-LTS-SP1:否
6.openEuler-24.03-LTS-SP3:否
7.openEuler-24.03-LTS-SP4:否

原因说明:
1.master:正常修复
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:不受影响-漏洞代码不存在
4.openEuler-24.03-LTS-Next:正常修复
5.openEuler-24.03-LTS-SP1:正常修复
6.openEuler-24.03-LTS-SP3:正常修复
7.openEuler-24.03-LTS-SP4:正常修复

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago Modify description of issue
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago changed custom priority from 次要 to 次要
openeuler-ci-bot
openeuler-ci-botCollaborators
2 days ago Comments:

@openeuler-ci-bot 经过 cve-manager 解析, 已分析的内容如下表所示:

状态 分析项目 内容
已分析 1.影响性分析说明 A local attacker with control over GRUB s configuration can bypass lockdown restrictions when booting with Secure Boot and load an unsigned GRUB module, while GRUB continues to report lockdown is enabled.The vulnerability is caused by insufficient validation of the MMIO base address passed to the GRUB serial command. GRUB does not validate that the base address corresponds to a UART device, rather than being an arbitrary memory address. This allows an attacker to trick GRUB into writing non-arbitrary data at an attacker-controlled address, including resetting the grub_file_verifiers list in a way that disables the subsequent verification of loaded modules.
已分析 2.openEulerScore 6.4
已分析 3.openEulerVector AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H
已分析 4.受影响版本排查 master:受影响,openEuler-20.03-LTS-SP4:不受影响,openEuler-22.03-LTS-SP4:不受影响,openEuler-24.03-LTS-Next:受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响
已分析 5.是否涉及abi变化 master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否
已分析 6.原因说明 master:正常修复,openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在,openEuler-22.03-LTS-SP4:不受影响-漏洞代码不存在,openEuler-24.03-LTS-Next:正常修复,openEuler-24.03-LTS-SP1:正常修复,openEuler-24.03-LTS-SP3:正常修复,openEuler-24.03-LTS-SP4:正常修复

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

likedislike
openeuler-ci-bot
openeuler-ci-botCollaborators
2 days ago Comments:

经过cve-manager解析,所有PR均已合入

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago changed custom state from 待办的 to 已完成
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago Close issue
openeuler-ci-bot
openeuler-ci-botCollaborators
2 days ago Comments:

经过cve-manager解析,所有PR均已合入

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago Removed label: CVE/UNFIXED
openeuler-ci-botopeneuler-ci-botCollaborators
2 days ago Added label: CVE/FIXED