Closed
CVE-2025-68194 #11614
openeuler-ci-botAdd on  Dec 16, 2025Closed at  Apr 9
openeuler-ci-bot
openeuler-ci-botCollaborators
Dec 16, 2025 Create

一、漏洞信息
漏洞编号:CVE-2025-68194
漏洞归属组件:kernel
漏洞归属的版本:4.19.140,4.19.194,4.19.90,5.10.0,6.1.19,6.12.33,6.4.0,6.6.0
CVSS评分:
BaseScore:N/A None
Vector:
漏洞简述:
In the Linux kernel, the following vulnerability has been resolved:media: imon: make send_packet() more robustsyzbot is reporting that imon has three problems which result inhung tasks due to forever holding device lock [1].First problem is that when usb_rx_callback_intf0() once got -EPROTO errorafter ictx->dev_present_intf0 became true, usb_rx_callback_intf0()resubmits urb after printk(), and resubmitted urb causesusb_rx_callback_intf0() to again get -EPROTO error. This results inprintk() flooding (RCU stalls).Alan Stern commented [2] that In theory it s okay to resubmit if the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don t bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There s nothing really wrong with giving up right away.but imon has a poor error-recovery scheme which just retries forever;this behavior should be fixed.Since I m not sure whether it is safe for imon users to give up upon anyerror code, this patch takes care of only union of error codes chosen frommodules in drivers/media/rc/ directory which handle -EPROTO error (i.e.ir_toy, mceusb and igorplugusb).Second problem is that when usb_rx_callback_intf0() once got -EPROTO errorbefore ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() alwaysresubmits urb due to commit 8791d63af0cf ( [media] imon: don t wedgehardware after early callbacks ). Move the ictx->dev_present_intf0 testintroduced by commit 6f6b90c9231a ( [media] imon: don t parse scancodesuntil intf configured ) to immediately before imon_incoming_packet(), orthe first problem explained above happens without printk() flooding (i.e.hung task).Third problem is that when usb_rx_callback_intf0() is not called for somereason (e.g. flaky hardware; the reproducer for this problem sometimesprevents usb_rx_callback_intf0() from being called),wait_for_completion_interruptible() in send_packet() never returns (i.e.hung task). As a workaround for such situation, change send_packet() towait for completion with timeout of 10 seconds.
漏洞公开时间:2025-12-16 22:15:52
漏洞创建时间:2025-12-16 22:14:34
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2025-68194

更多参考(点击展开)
参考来源 参考链接 来源链接
https://lore.kernel.org/linux-cve-announce/2025121636-CVE-2025-68194-2b2f@gregkh/T
https://lore.kernel.org/linux-cve-announce/2025121636-CVE-2025-68194-2b2f@gregkh/T/#u
https://git.kernel.org/stable/c/8231e80118463be5598daaf266c1c83650f1948b
https://nvd.nist.gov/vuln/detail/CVE-2025-68194
https://git.kernel.org/stable/c/519737af11c03590819a6eec2ad532cfdb87ea63
https://git.kernel.org/stable/c/eecd203ada43a4693ce6fdd3a58ae10c7819252c
https://git.kernel.org/stable/c/0213e4175abbb9dfcbf7c197e3817d527f459ad5
https://www.cve.org/CVERecord?id=CVE-2025-68194
https://git.kernel.org/stable/c/26f6a1dd5d81ad61a875a747698da6f27abf389b
https://git.kernel.org/stable/c/f7f3ecb4934fff782fa9bb1cd16e2290c041b22d
https://git.kernel.org/stable/c/667afd4681781f60a644cd0d2ee6c59cb1c36208
https://bugzilla.redhat.com/show_bug.cgi?id=2422739
https://advisory.echohq.com/cve/CVE-2025-68194
https://git.kernel.org/stable/c/f58ab83b7b7133e6baefe03a46846c4f6ce45e2f

漏洞分析指导链接:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
七彩瞬析开源风险感知平台
漏洞补丁信息:

详情(点击展开)
影响的包 修复版本 修复补丁 问题引入补丁 来源
gregkh/linux https://git.kernel.org/stable/c/519737af11c03590819a6eec2ad532cfdb87ea63.patch ljqc
https://git.kernel.org/stable/c/8231e80118463be5598daaf266c1c83650f1948b cvelistv5
https://git.kernel.org/stable/c/519737af11c03590819a6eec2ad532cfdb87ea63 cvelistv5
https://git.kernel.org/stable/c/eecd203ada43a4693ce6fdd3a58ae10c7819252c cvelistv5
https://git.kernel.org/stable/c/0213e4175abbb9dfcbf7c197e3817d527f459ad5 cvelistv5
https://git.kernel.org/stable/c/26f6a1dd5d81ad61a875a747698da6f27abf389b cvelistv5
https://git.kernel.org/stable/c/f7f3ecb4934fff782fa9bb1cd16e2290c041b22d cvelistv5
https://git.kernel.org/stable/c/667afd4681781f60a644cd0d2ee6c59cb1c36208 cvelistv5
https://git.kernel.org/stable/c/f58ab83b7b7133e6baefe03a46846c4f6ce45e2f cvelistv5

二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:media: imon: make send_packet() more robustsyzbot is reporting that imon has three problems which result inhung tasks due to forever holding device lock [1].First problem is that when usb_rx_callback_intf0() once got -EPROTO errorafter ictx->dev_present_intf0 became true, usb_rx_callback_intf0()resubmits urb after printk(), and resubmitted urb causesusb_rx_callback_intf0() to again get -EPROTO error. This results inprintk() flooding (RCU stalls).Alan Stern commented [2] that In theory it's okay to resubmit if the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don't bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There's nothing really wrong with giving up right away.but imon has a poor error-recovery scheme which just retries forever;this behavior should be fixed.Since I'm not sure whether it is safe for imon users to give up upon anyerror code, this patch takes care of only union of error codes chosen frommodules in drivers/media/rc/ directory which handle -EPROTO error (i.e.ir_toy, mceusb and igorplugusb).Second problem is that when usb_rx_callback_intf0() once got -EPROTO errorbefore ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() alwaysresubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedgehardware after early callbacks"). Move the ictx->dev_present_intf0 testintroduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodesuntil intf configured") to immediately before imon_incoming_packet(), orthe first problem explained above happens without printk() flooding (i.e.hung task).Third problem is that when usb_rx_callback_intf0() is not called for somereason (e.g. flaky hardware; the reproducer for this problem sometimesprevents usb_rx_callback_intf0() from being called),wait_for_completion_interruptible() in send_packet() never returns (i.e.hung task). As a workaround for such situation, change send_packet() towait for completion with timeout of 10 seconds.The Linux kernel CVE team has assigned CVE-2025-68194 to this issue.
openEuler评分:
5.5
Vector:CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.master(6.12.33):不受影响
2.openEuler-20.03-LTS-SP4(4.19.90):受影响
3.openEuler-22.03-LTS-SP3(5.10.0):受影响
4.openEuler-22.03-LTS-SP4(5.10.0):受影响
5.openEuler-24.03-LTS(6.6.0):受影响
6.openEuler-24.03-LTS-Next(6.6.0):不受影响
7.openEuler-24.03-LTS-SP1(6.6.0):受影响
8.openEuler-24.03-LTS-SP2(6.6.0):受影响
9.openEuler-24.03-LTS-SP3(6.6.0):不受影响

修复是否涉及abi变化(是/否):
1.master(6.12.33):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP3(5.10.0):否
4.openEuler-22.03-LTS-SP4(5.10.0):否
5.openEuler-24.03-LTS(6.6.0):否
6.openEuler-24.03-LTS-Next(6.6.0):否
7.openEuler-24.03-LTS-SP1(6.6.0):否
8.openEuler-24.03-LTS-SP2(6.6.0):否
9.openEuler-24.03-LTS-SP3(6.6.0):否

原因说明:
1.master(6.12.33):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4(4.19.90):不修复-超出修复范围
3.openEuler-22.03-LTS-SP3(5.10.0):不修复-超出修复范围
4.openEuler-22.03-LTS-SP4(5.10.0):不修复-超出修复范围
5.openEuler-24.03-LTS(6.6.0):正常修复
6.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1(6.6.0):正常修复
8.openEuler-24.03-LTS-SP2(6.6.0):正常修复
9.openEuler-24.03-LTS-SP3(6.6.0):不受影响-漏洞代码不能被攻击者触发

likedislike
openeuler-ci-bot
openeuler-ci-botCollaborators
Dec 16, 2025 Comments:

Hi openeuler-ci-bot, welcome to the openEuler Community.
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here.
If you have any questions, please contact the SIG: Kernel, and any of the maintainers.

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Dec 16, 2025 添加了   CVE/UNFIXED 标签
openeuler-ci-botopeneuler-ci-botCollaborators
Dec 16, 2025 创建了CVE和安全问题
openeuler-ci-bot
openeuler-ci-botCollaborators
Dec 16, 2025 Comments:

@jiaoff ,@guohaocs2c ,@hanjun-guo ,@woqidaideshi ,@newbeats ,@zhangyi089 ,@colyli ,@htforge ,@chiqijun ,@lengchao ,@zhujianwei001 ,@kylin-mayukun ,@wangxiongfeng ,@wkfxxx ,@SuperSix173 ,@jentlestea ,@gasonchen ,@kailiu42 ,@whoisxxx ,@kevinzhu1
issue处理注意事项:
1. 当前issue受影响的分支提交pr时, 须在pr描述中填写当前issue编号进行关联, 否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容,未引入的分支不需要填写, 否则无法关闭当前issue;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复, 注: 内容的标题名称(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.


影响性分析说明:

openEuler评分: (评分和向量)

受影响版本排查(受影响/不受影响):
1.master(6.12.33):
2.openEuler-20.03-LTS-SP4:
3.openEuler-22.03-LTS-SP3(5.10.0):
4.openEuler-22.03-LTS-SP4(5.10.0):
5.openEuler-24.03-LTS:
6.openEuler-24.03-LTS-Next:
7.openEuler-24.03-LTS-SP1:
8.openEuler-24.03-LTS-SP2:
9.openEuler-24.03-LTS-SP3:

修复是否涉及abi变化(是/否):
1.master(6.12.33):
2.openEuler-20.03-LTS-SP4:
3.openEuler-22.03-LTS-SP3(5.10.0):
4.openEuler-22.03-LTS-SP4(5.10.0):
5.openEuler-24.03-LTS:
6.openEuler-24.03-LTS-Next:
7.openEuler-24.03-LTS-SP1:
8.openEuler-24.03-LTS-SP2:
9.openEuler-24.03-LTS-SP3:

原因说明:
1.master(6.12.33):
2.openEuler-20.03-LTS-SP4:
3.openEuler-22.03-LTS-SP3(5.10.0):
4.openEuler-22.03-LTS-SP4(5.10.0):
5.openEuler-24.03-LTS:
6.openEuler-24.03-LTS-Next:
7.openEuler-24.03-LTS-SP1:
8.openEuler-24.03-LTS-SP2:
9.openEuler-24.03-LTS-SP3:


原因说明填写请参考下方表格(注意:版本是否受影响和版本的原因说明必须对应,例如master版本分支受影响,那原因说明只能是受影响对应的原因之一!):

分支状态 原因说明
受影响 正常修复
受影响 暂不修复-漏洞仍在分析中
受影响 暂不修复-暂无解决方案或补丁
受影响 暂不修复-待升级版本修复
受影响 不修复-超出修复范围
受影响 不修复-特殊原因导致不再修复
不受影响 不受影响-组件不存在
不受影响 不受影响-已有内置的内联控制或缓解措施
不受影响 不受影响-漏洞代码不能被攻击者触发
不受影响 不受影响-漏洞代码不在执行路径
不受影响 不受影响-漏洞代码不存在

issue处理具体操作请参考:
https://gitee.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://gitee.com/help/articles/4142

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Dec 16, 2025 添加了   sig/Kernel 标签
Dec 16, 2025 Comments:

检测到新建 CVE Issue,CVE-ID: CVE-2025-68194。

你可以通过以下两种方式使用 CVE 修复服务:

  1. 分支影响分析

    • 在本 Issue 下评论:/analysis_branches
    • 系统将自动分析各个分支是否受影响,并在本 Issue 下给出表格形式的分析结果;
  2. 在指定分支上创建 PR(修复提交)

    • 在本 Issue 下按如下格式评论(字段均为必填,每个字段单独一行):
/create_pr

branch: OLK-6.6 OLK-5.10
name: dev
email: dev@devstation.com
  • 说明:
    • branch: 需要创建 PR 的目标分支列表,例如 OLK-6.6 OLK-5.10;
    • name: PR 签名人姓名(如责任人或安全负责人);
    • email: PR 签名人邮箱;

系统会根据上述信息自动在指定分支上创建 PR,并在本 Issue 下反馈结果。

provided by DevStation.

likedislike
openeuler-ci-bot
openeuler-ci-botCollaborators
Dec 16, 2025 Comments:
参考网址 关联pr 状态 补丁链接
https://nvd.nist.gov/vuln/detail/CVE-2025-68194
https://ubuntu.com/security/CVE-2025-68194NoneNonehttps://discourse.ubuntu.com/c/project
https://www.opencve.io/cve/CVE-2025-68194
https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2025-68194
https://security-tracker.debian.org/tracker/CVE-2025-68194
http://www.cnnvd.org.cn/web/vulnerability/queryLds.tag?qcvCnnvdid=CVE-2025-68194

说明:补丁链接仅供初步排查参考,实际可用性请人工再次确认,补丁下载验证可使用CVE补丁工具。
若补丁不准确,烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息,便于我们不断优化工具,不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Dec 16, 2025 修改了描述
10 event messages are collapsed here。 See more
Oopeneuler-infra-botCollaborators
Feb 6 Associated pull request
hulk-ci-botCollaborators
Feb 6 Comments:

CVE-2025-68194

影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:

media: imon: make send_packet() more robust

syzbot is reporting that imon has three problems which result in
hung tasks due to forever holding device lock [1].

First problem is that when usb_rx_callback_intf0() once got -EPROTO error
after ictx->dev_present_intf0 became true, usb_rx_callback_intf0()
resubmits urb after printk(), and resubmitted urb causes
usb_rx_callback_intf0() to again get -EPROTO error. This results in
printk() flooding (RCU stalls).

Alan Stern commented [2] that

In theory it's okay to resubmit if the driver has a robust
error-recovery scheme (such as giving up after some fixed limit on the
number of errors or after some fixed time has elapsed, perhaps with a
time delay to prevent a flood of errors). Most drivers don't bother to
do this; they simply give up right away. This makes them more
vulnerable to short-term noise interference during USB transfers, but in
reality such interference is quite rare. There's nothing really wrong
with giving up right away.

but imon has a poor error-recovery scheme which just retries forever;
this behavior should be fixed.

Since I'm not sure whether it is safe for imon users to give up upon any
error code, this patch takes care of only union of error codes chosen from
modules in drivers/media/rc/ directory which handle -EPROTO error (i.e.
ir_toy, mceusb and igorplugusb).

Second problem is that when usb_rx_callback_intf0() once got -EPROTO error
before ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() always
resubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedge
hardware after early callbacks"). Move the ictx->dev_present_intf0 test
introduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodes
until intf configured") to immediately before imon_incoming_packet(), or
the first problem explained above happens without printk() flooding (i.e.
hung task).

Third problem is that when usb_rx_callback_intf0() is not called for some
reason (e.g. flaky hardware; the reproducer for this problem sometimes
prevents usb_rx_callback_intf0() from being called),
wait_for_completion_interruptible() in send_packet() never returns (i.e.
hung task). As a workaround for such situation, change send_packet() to
wait for completion with timeout of 10 seconds.

The Linux kernel CVE team has assigned CVE-2025-68194 to this issue.

openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

受影响版本排查(受影响/不受影响):
1.master(6.1.0):不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:不受影响

修复是否涉及abi变化(是/否):
1.master(6.1.0):否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否

原因说明:
1.master(23.08.5):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:正常修复
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复
8.openEuler-24.03-LTS-SP2:正常修复
9.openEuler-24.03-LTS-SP3:不受影响-漏洞代码不能被攻击者触发

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Feb 6 Modify description of issue
openeuler-ci-bot
openeuler-ci-botCollaborators
Feb 6 Comments:

@jerry_lilijun 经过 cve-manager 解析, 已分析的内容如下表所示:

状态 分析项目 内容
已分析 1.影响性分析说明 In the Linux kernel, the following vulnerability has been resolved:media: imon: make send_packet() more robustsyzbot is reporting that imon has three problems which result inhung tasks due to forever holding device lock [1].First problem is that when usb_rx_callback_intf0() once got -EPROTO errorafter ictx->dev_present_intf0 became true, usb_rx_callback_intf0()resubmits urb after printk(), and resubmitted urb causesusb_rx_callback_intf0() to again get -EPROTO error. This results inprintk() flooding (RCU stalls).Alan Stern commented [2] that In theory it's okay to resubmit if the driver has a robust error-recovery scheme (such as giving up after some fixed limit on the number of errors or after some fixed time has elapsed, perhaps with a time delay to prevent a flood of errors). Most drivers don't bother to do this; they simply give up right away. This makes them more vulnerable to short-term noise interference during USB transfers, but in reality such interference is quite rare. There's nothing really wrong with giving up right away.but imon has a poor error-recovery scheme which just retries forever;this behavior should be fixed.Since I'm not sure whether it is safe for imon users to give up upon anyerror code, this patch takes care of only union of error codes chosen frommodules in drivers/media/rc/ directory which handle -EPROTO error (i.e.ir_toy, mceusb and igorplugusb).Second problem is that when usb_rx_callback_intf0() once got -EPROTO errorbefore ictx->dev_present_intf0 becomes true, usb_rx_callback_intf0() alwaysresubmits urb due to commit 8791d63af0cf ("[media] imon: don't wedgehardware after early callbacks"). Move the ictx->dev_present_intf0 testintroduced by commit 6f6b90c9231a ("[media] imon: don't parse scancodesuntil intf configured") to immediately before imon_incoming_packet(), orthe first problem explained above happens without printk() flooding (i.e.hung task).Third problem is that when usb_rx_callback_intf0() is not called for somereason (e.g. flaky hardware; the reproducer for this problem sometimesprevents usb_rx_callback_intf0() from being called),wait_for_completion_interruptible() in send_packet() never returns (i.e.hung task). As a workaround for such situation, change send_packet() towait for completion with timeout of 10 seconds.The Linux kernel CVE team has assigned CVE-2025-68194 to this issue.
已分析 2.openEulerScore 5.5
已分析 3.openEulerVector AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
已分析 4.受影响版本排查 master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP2:受影响,openEuler-24.03-LTS-SP3:不受影响
已分析 5.是否涉及abi变化 master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP2:否,openEuler-24.03-LTS-SP3:否
已分析 6.原因说明 master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不修复-超出修复范围,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-22.03-LTS-SP4:不修复-超出修复范围,openEuler-24.03-LTS:正常修复,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:正常修复,openEuler-24.03-LTS-SP2:正常修复,openEuler-24.03-LTS-SP3:不受影响-漏洞代码不能被攻击者触发

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

likedislike
openeuler-ci-bot
openeuler-ci-botCollaborators
Feb 6 Comments:

经过cve-manager解析,部分分支PR未合入,如红色字体所示:

原因说明:
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:正常修复(PR未合入)
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复(PR未合入)
8.openEuler-24.03-LTS-SP2:正常修复(PR未合入)
9.openEuler-24.03-LTS-SP3:不受影响-漏洞代码不能被攻击者触发

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Feb 6 changed custom state from 待办的 to 进行中
openeuler-ci-botopeneuler-ci-botCollaborators
Apr 9 changed custom state from 进行中 to 已完成
openeuler-ci-botopeneuler-ci-botCollaborators
Apr 9 Close issue
openeuler-ci-botopeneuler-ci-botCollaborators
Apr 9 Removed label: CVE/UNFIXED
openeuler-ci-botopeneuler-ci-botCollaborators
Apr 9 Added label: CVE/FIXED