Closed
CVE-2025-71104 #13419
openeuler-ci-botAdd on  Jan 14Closed at  Mar 24
openeuler-ci-bot
openeuler-ci-botCollaborators
Jan 14 Create

一、漏洞信息
漏洞编号:CVE-2025-71104
漏洞归属组件:kernel
漏洞归属的版本:4.19.140,4.19.194,4.19.90,5.10.0,6.1.19,6.12.33,6.4.0,6.6.0
CVSS评分:
BaseScore:N/A None
Vector:
漏洞简述:
In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timerWhen advancing the target expiration for the guest s APIC timer in periodicmode, set the expiration to now if the target expiration is in the past(similar to what is done in update_target_expiration()). Blindly addingthe period to the previous target expiration can result in KVM generatinga practically unbounded number of hrtimer IRQs due to programming anexpired timer over and over. In extreme scenarios, e.g. if userspacepauses/suspends a VM for an extended duration, this can even cause hardlockups in the host.Currently, the bug only affects Intel CPUs when using the hypervisor timer(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,a.k.a. hrtimer, which KVM keeps running even on exits to userspace, theHV timer only runs while the guest is active. As a result, if the vCPUdoes not run for an extended duration, there will be a huge gap betweenthe target expiration and the current time the vCPU resumes running.Because the target expiration is incremented by only one period on eachtimer expiration, this leads to a series of timer expirations occurringrapidly after the vCPU/VM resumes.More critically, when the vCPU first triggers a periodic HV timerexpiration after resuming, advancing the expiration by only one periodwill result in a target expiration in the past. As a result, the deltamay be calculated as a negative value. When the delta is converted intoan absolute value (tscdeadline is an unsigned u64), the resulting valuecan overflow what the HV timer is capable of programming. I.e. the largevalue will exceed the VMX Preemption Timer s maximum bit width ofcpu_preemption_timer_multi + 32, and thus cause KVM to switch from theHV timer to the software timer (hrtimers).After switching to the software timer, periodic timer expiration callbacksmay be executed consecutively within a single clock interrupt handler,because hrtimers honors KVM s request for an expiration in the past andimmediately re-invokes KVM s callback after reprogramming. And becausethe interrupt handler runs with IRQs disabled, restarting KVM s hrtimerover and over until the target expiration is advanced to now can resultin a hard lockup.E.g. the following hard lockup was triggered in the host when running aWindows VM (only relevant because it used the APIC timer in periodic mode)after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 Moreover, if the suspend duration of the virtual machine is not long enoughto trigger a hard lockup in this scenario, since commit 98c25ead5eda( KVM: VMX: Move preemption timer <=> hrtimer dance to common x86 ), KVMwill continue using the software timer until the guest reprograms the APICtimer in some way. Since the periodic timer does not require frequent APICtimer register programming, the guest may continue to use the softwaretimer in ---truncated---
漏洞公开时间:2026-01-14 23:15:59
漏洞创建时间:2026-01-14 23:33:11
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2025-71104

更多参考(点击展开)
参考来源 参考链接 来源链接
https://git.kernel.org/stable/c/e23f46f1a971c73dad2fd63e1408696114ddebe2
https://www.cve.org/CVERecord?id=CVE-2025-71104
https://git.kernel.org/stable/c/807dbe8f3862fa7c164155857550ce94b36a11b9
https://git.kernel.org/stable/c/7b54ccef865e0aa62e4871d4ada2ba4b9dcb8bed
https://git.kernel.org/stable/c/e746e51947053a02af2ea964593dc4887108d379
https://git.kernel.org/stable/c/786ed625c125c5cd180d6aaa37e653e3e4ffb8d9
https://bugzilla.redhat.com/show_bug.cgi?id=2429577
https://lore.kernel.org/linux-cve-announce/2026011410-CVE-2025-71104-6882@gregkh/T/#u
https://git.kernel.org/stable/c/18ab3fc8e880791aa9f7c000261320fc812b5465
https://git.kernel.org/stable/c/d2da0df7bbc4fb4fd7d0a1da704f81a09c72fe73
https://lore.kernel.org/linux-cve-announce/2026011410-CVE-2025-71104-6882@gregkh/T
https://nvd.nist.gov/vuln/detail/CVE-2025-71104

漏洞分析指导链接:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
七彩瞬析开源风险感知平台
漏洞补丁信息:

详情(点击展开)
影响的包 修复版本 修复补丁 问题引入补丁 来源
gregkh/linux https://git.kernel.org/stable/c/807dbe8f3862fa7c164155857550ce94b36a11b9.patch ljqc
https://git.kernel.org/stable/c/e23f46f1a971c73dad2fd63e1408696114ddebe2 cvelistv5
https://git.kernel.org/stable/c/807dbe8f3862fa7c164155857550ce94b36a11b9 cvelistv5
https://git.kernel.org/stable/c/7b54ccef865e0aa62e4871d4ada2ba4b9dcb8bed cvelistv5
https://git.kernel.org/stable/c/e746e51947053a02af2ea964593dc4887108d379 cvelistv5
https://git.kernel.org/stable/c/786ed625c125c5cd180d6aaa37e653e3e4ffb8d9 cvelistv5
https://git.kernel.org/stable/c/18ab3fc8e880791aa9f7c000261320fc812b5465 cvelistv5
https://git.kernel.org/stable/c/d2da0df7bbc4fb4fd7d0a1da704f81a09c72fe73 cvelistv5

二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timerWhen advancing the target expiration for the guest's APIC timer in periodicmode, set the expiration to "now" if the target expiration is in the past(similar to what is done in update_target_expiration()). Blindly addingthe period to the previous target expiration can result in KVM generatinga practically unbounded number of hrtimer IRQs due to programming anexpired timer over and over. In extreme scenarios, e.g. if userspacepauses/suspends a VM for an extended duration, this can even cause hardlockups in the host.Currently, the bug only affects Intel CPUs when using the hypervisor timer(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,a.k.a. hrtimer, which KVM keeps running even on exits to userspace, theHV timer only runs while the guest is active. As a result, if the vCPUdoes not run for an extended duration, there will be a huge gap betweenthe target expiration and the current time the vCPU resumes running.Because the target expiration is incremented by only one period on eachtimer expiration, this leads to a series of timer expirations occurringrapidly after the vCPU/VM resumes.More critically, when the vCPU first triggers a periodic HV timerexpiration after resuming, advancing the expiration by only one periodwill result in a target expiration in the past. As a result, the deltamay be calculated as a negative value. When the delta is converted intoan absolute value (tscdeadline is an unsigned u64), the resulting valuecan overflow what the HV timer is capable of programming. I.e. the largevalue will exceed the VMX Preemption Timer's maximum bit width ofcpu_preemption_timer_multi + 32, and thus cause KVM to switch from theHV timer to the software timer (hrtimers).After switching to the software timer, periodic timer expiration callbacksmay be executed consecutively within a single clock interrupt handler,because hrtimers honors KVM's request for an expiration in the past andimmediately re-invokes KVM's callback after reprogramming. And becausethe interrupt handler runs with IRQs disabled, restarting KVM's hrtimerover and over until the target expiration is advanced to "now" can resultin a hard lockup.E.g. the following hard lockup was triggered in the host when running aWindows VM (only relevant because it used the APIC timer in periodic mode)after resuming the VM from a long suspend (in the host). NMI watchdog: Watchdog detected hard LOCKUP on cpu 45 ... RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm] ... RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046 RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500 RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0 R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0 R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8 FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0 PKRU: 55555554 Call Trace: <IRQ> apic_timer_fn+0x31/0x50 [kvm] __hrtimer_run_queues+0x100/0x280 hrtimer_interrupt+0x100/0x210 ? ttwu_do_wakeup+0x19/0x160 smp_apic_timer_interrupt+0x6a/0x130 apic_timer_interrupt+0xf/0x20 </IRQ>Moreover, if the suspend duration of the virtual machine is not long enoughto trigger a hard lockup in this scenario, since commit 98c25ead5eda("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVMwill continue using the software timer until the guest reprograms the APICtimer in some way. Since the periodic timer does not require frequent APICtimer register programming, the guest may continue to use the softwaretimer in perpetuity.[sean: massage comments and changelog]The Linux kernel CVE team has assigned CVE-2025-71104 to this issue.
openEuler评分:
5.5
Vector:CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.master(6.12.33):不受影响
2.openEuler-20.03-LTS-SP4(4.19.90):受影响
3.openEuler-22.03-LTS-SP3(5.10.0):受影响
4.openEuler-22.03-LTS-SP4(5.10.0):受影响
5.openEuler-24.03-LTS(6.6.0):受影响
6.openEuler-24.03-LTS-Next(6.6.0):不受影响
7.openEuler-24.03-LTS-SP1(6.6.0):受影响
8.openEuler-24.03-LTS-SP2(6.6.0):受影响
9.openEuler-24.03-LTS-SP3(6.6.0):不受影响

修复是否涉及abi变化(是/否):
1.master(6.12.33):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP3(5.10.0):否
4.openEuler-22.03-LTS-SP4(5.10.0):否
5.openEuler-24.03-LTS(6.6.0):否
6.openEuler-24.03-LTS-Next(6.6.0):否
7.openEuler-24.03-LTS-SP1(6.6.0):否
8.openEuler-24.03-LTS-SP2(6.6.0):否
9.openEuler-24.03-LTS-SP3(6.6.0):否

原因说明:
1.master(6.12.33):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4(4.19.90):不修复-超出修复范围
3.openEuler-22.03-LTS-SP3(5.10.0):正常修复
4.openEuler-22.03-LTS-SP4(5.10.0):正常修复
5.openEuler-24.03-LTS(6.6.0):正常修复
6.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1(6.6.0):正常修复
8.openEuler-24.03-LTS-SP2(6.6.0):正常修复
9.openEuler-24.03-LTS-SP3(6.6.0):不受影响-漏洞代码不能被攻击者触发

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Jan 14 Added label: CVE/UNFIXED
openeuler-ci-bot
openeuler-ci-botCollaborators
Jan 14 Comments:

issue处理注意事项:
1. 当前issue受影响的分支提交pr时, 须在pr描述中填写当前issue编号进行关联, 否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容,未引入的分支不需要填写, 否则无法关闭当前issue;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复, 注: 内容的标题名称(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.


影响性分析说明:

openEuler评分: (评分和向量)

受影响版本排查(受影响/不受影响):
1.master(6.12.33):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP3(5.10.0):
4.openEuler-22.03-LTS-SP4(5.10.0):
5.openEuler-24.03-LTS(6.6.0):
6.openEuler-24.03-LTS-Next(6.6.0):
7.openEuler-24.03-LTS-SP1(6.6.0):
8.openEuler-24.03-LTS-SP2(6.6.0):
9.openEuler-24.03-LTS-SP3(6.6.0):

修复是否涉及abi变化(是/否):
1.master(6.12.33):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP3(5.10.0):
4.openEuler-22.03-LTS-SP4(5.10.0):
5.openEuler-24.03-LTS(6.6.0):
6.openEuler-24.03-LTS-Next(6.6.0):
7.openEuler-24.03-LTS-SP1(6.6.0):
8.openEuler-24.03-LTS-SP2(6.6.0):
9.openEuler-24.03-LTS-SP3(6.6.0):

原因说明:
1.master(6.12.33):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP3(5.10.0):
4.openEuler-22.03-LTS-SP4(5.10.0):
5.openEuler-24.03-LTS(6.6.0):
6.openEuler-24.03-LTS-Next(6.6.0):
7.openEuler-24.03-LTS-SP1(6.6.0):
8.openEuler-24.03-LTS-SP2(6.6.0):
9.openEuler-24.03-LTS-SP3(6.6.0):


原因说明填写请参考下方表格(注意:版本是否受影响和版本的原因说明必须对应,例如master版本分支受影响,那原因说明只能是受影响对应的原因之一!):

分支状态 原因说明
受影响 正常修复
受影响 暂不修复-漏洞仍在分析中
受影响 暂不修复-暂无解决方案或补丁
受影响 暂不修复-待升级版本修复
受影响 不修复-超出修复范围
受影响 不修复-特殊原因导致不再修复
不受影响 不受影响-组件不存在
不受影响 不受影响-已有内置的内联控制或缓解措施
不受影响 不受影响-漏洞代码不能被攻击者触发
不受影响 不受影响-漏洞代码不在执行路径
不受影响 不受影响-漏洞代码不存在

issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

likedislike
devstation-robot
devstation-robot
Jan 14 Comments:

检测到新建 CVE Issue,CVE-ID: CVE-2025-71104。

你可以通过以下两种方式使用 CVE 修复服务:

  1. 分支影响分析

    • 在本 Issue 下评论:/analysis_branches
    • 系统将自动分析各个分支是否受影响,并在本 Issue 下给出表格形式的分析结果;
  2. 在指定分支上创建 PR(修复提交)

    • 在本 Issue 下按如下格式评论(字段均为必填,每个字段单独一行):
/create_pr

branch: OLK-6.6 OLK-5.10
name: dev
email: dev@devstation.com
  • 说明:
    • branch: 需要创建 PR 的目标分支列表,例如 OLK-6.6 OLK-5.10;
    • name: PR 签名人姓名(如责任人或安全负责人);
    • email: PR 签名人邮箱;

系统会根据上述信息自动在指定分支上创建 PR,并在本 Issue 下反馈结果。

provided by DevStation.

likedislike
openeuler-ci-botopeneuler-ci-botCollaborators
Jan 14 Added label: sig/Kernel
openeuler-ci-bot
openeuler-ci-botCollaborators
Jan 14 Comments:
82 messages are collapsed here。 See more
openeuler-ci-botopeneuler-ci-botCollaborators
Mar 24 Removed label: CVE/UNFIXED
openeuler-ci-botopeneuler-ci-botCollaborators
Mar 24 Added label: CVE/FIXED
hulk-ci-botCollaborators
Jun 1 Comments:

CVE-2025-71104

影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer

When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.

Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.

More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).

After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.

E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).

NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>

Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in perpetuity.

[sean: massage comments and changelog]

The Linux kernel CVE team has assigned CVE-2025-71104 to this issue.

openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H

受影响版本排查(受影响/不受影响):
1.master(6.1.0):不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP4:受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:不受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP3:受影响
8.openEuler-24.03-LTS-SP3:不受影响

修复是否涉及abi变化(是/否):
1.master(6.1.0):否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS:否
5.openEuler-24.03-LTS-Next:否
6.openEuler-24.03-LTS-SP1:否
7.openEuler-24.03-LTS-SP3:否
8.openEuler-24.03-LTS-SP4:否

原因说明:
1.master(23.08.5):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:正常修复
4.openEuler-24.03-LTS:正常修复
5.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
6.openEuler-24.03-LTS-SP1:正常修复
7.openEuler-24.03-LTS-SP3:正常修复
8.openEuler-24.03-LTS-SP4:不受影响-漏洞代码不能被攻击者触发

likedislike
hulk-ci-botCollaborators
Jun 1 Comments:

CVE-2025-71104

影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer

When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.

Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.

More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).

After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.

E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).

NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>

Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in perpetuity.

[sean: massage comments and changelog]

The Linux kernel CVE team has assigned CVE-2025-71104 to this issue.

openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H

受影响版本排查(受影响/不受影响):
1.master(6.1.0):不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP4:受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:不受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP3:受影响
8.openEuler-24.03-LTS-SP4:不受影响

修复是否涉及abi变化(是/否):
1.master(6.1.0):否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS:否
5.openEuler-24.03-LTS-Next:否
6.openEuler-24.03-LTS-SP1:否
7.openEuler-24.03-LTS-SP3:否
8.openEuler-24.03-LTS-SP4:否

原因说明:
1.master(23.08.5):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:正常修复
4.openEuler-24.03-LTS:正常修复
5.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
6.openEuler-24.03-LTS-SP1:正常修复
7.openEuler-24.03-LTS-SP3:正常修复
8.openEuler-24.03-LTS-SP4:不受影响-漏洞代码不能被攻击者触发

likedislike
hulk-ci-botCollaborators
Jun 1 Comments:

CVE-2025-71104

影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: Fix VM hard lockup after prolonged inactivity with periodic HV timer

When advancing the target expiration for the guest's APIC timer in periodic
mode, set the expiration to "now" if the target expiration is in the past
(similar to what is done in update_target_expiration()). Blindly adding
the period to the previous target expiration can result in KVM generating
a practically unbounded number of hrtimer IRQs due to programming an
expired timer over and over. In extreme scenarios, e.g. if userspace
pauses/suspends a VM for an extended duration, this can even cause hard
lockups in the host.

Currently, the bug only affects Intel CPUs when using the hypervisor timer
(HV timer), a.k.a. the VMX preemption timer. Unlike the software timer,
a.k.a. hrtimer, which KVM keeps running even on exits to userspace, the
HV timer only runs while the guest is active. As a result, if the vCPU
does not run for an extended duration, there will be a huge gap between
the target expiration and the current time the vCPU resumes running.
Because the target expiration is incremented by only one period on each
timer expiration, this leads to a series of timer expirations occurring
rapidly after the vCPU/VM resumes.

More critically, when the vCPU first triggers a periodic HV timer
expiration after resuming, advancing the expiration by only one period
will result in a target expiration in the past. As a result, the delta
may be calculated as a negative value. When the delta is converted into
an absolute value (tscdeadline is an unsigned u64), the resulting value
can overflow what the HV timer is capable of programming. I.e. the large
value will exceed the VMX Preemption Timer's maximum bit width of
cpu_preemption_timer_multi + 32, and thus cause KVM to switch from the
HV timer to the software timer (hrtimers).

After switching to the software timer, periodic timer expiration callbacks
may be executed consecutively within a single clock interrupt handler,
because hrtimers honors KVM's request for an expiration in the past and
immediately re-invokes KVM's callback after reprogramming. And because
the interrupt handler runs with IRQs disabled, restarting KVM's hrtimer
over and over until the target expiration is advanced to "now" can result
in a hard lockup.

E.g. the following hard lockup was triggered in the host when running a
Windows VM (only relevant because it used the APIC timer in periodic mode)
after resuming the VM from a long suspend (in the host).

NMI watchdog: Watchdog detected hard LOCKUP on cpu 45
...
RIP: 0010:advance_periodic_target_expiration+0x4d/0x80 [kvm]
...
RSP: 0018:ff4f88f5d98d8ef0 EFLAGS: 00000046
RAX: fff0103f91be678e RBX: fff0103f91be678e RCX: 00843a7d9e127bcc
RDX: 0000000000000002 RSI: 0052ca4003697505 RDI: ff440d5bfbdbd500
RBP: ff440d5956f99200 R08: ff2ff2a42deb6a84 R09: 000000000002a6c0
R10: 0122d794016332b3 R11: 0000000000000000 R12: ff440db1af39cfc0
R13: ff440db1af39cfc0 R14: ffffffffc0d4a560 R15: ff440db1af39d0f8
FS: 00007f04a6ffd700(0000) GS:ff440db1af380000(0000) knlGS:000000e38a3b8000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000d5651feff8 CR3: 000000684e038002 CR4: 0000000000773ee0
PKRU: 55555554
Call Trace:
<IRQ>
apic_timer_fn+0x31/0x50 [kvm]
__hrtimer_run_queues+0x100/0x280
hrtimer_interrupt+0x100/0x210
? ttwu_do_wakeup+0x19/0x160
smp_apic_timer_interrupt+0x6a/0x130
apic_timer_interrupt+0xf/0x20
</IRQ>

Moreover, if the suspend duration of the virtual machine is not long enough
to trigger a hard lockup in this scenario, since commit 98c25ead5eda
("KVM: VMX: Move preemption timer <=> hrtimer dance to common x86"), KVM
will continue using the software timer until the guest reprograms the APIC
timer in some way. Since the periodic timer does not require frequent APIC
timer register programming, the guest may continue to use the software
timer in perpetuity.

[sean: massage comments and changelog]

The Linux kernel CVE team has assigned CVE-2025-71104 to this issue.

openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

受影响版本排查(受影响/不受影响):
1.master(6.1.0):不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:不受影响

修复是否涉及abi变化(是/否):
1.master(6.1.0):否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否

原因说明:
1.master(23.08.5):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:正常修复
5.openEuler-24.03-LTS:正常修复
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:正常修复
10.openEuler-24.03-LTS-SP4:不受影响-漏洞代码不能被攻击者触发

likedislike