检测到新建 CVE Issue，CVE-ID: CVE-2026-63808。

你可以通过以下两种方式使用 CVE 修复服务：

1. 分支影响分析

   • 在本 Issue 下评论：/analysis_branches
   • 系统将自动分析各个分支是否受影响，并在本 Issue 下给出表格形式的分析结果；

2. 在指定分支上创建 PR（修复提交）

   • 在本 Issue 下按如下格式评论（字段均为必填，每个字段单独一行）：

/create_pr

branch: OLK-6.6 OLK-5.10
name: dev
email: dev@devstation.com

• 说明：
  • branch: 需要创建 PR 的目标分支列表，例如 OLK-6.6 OLK-5.10；
  • name: PR 签名人姓名（如责任人或安全负责人）；
  • email: PR 签名人邮箱；

系统会根据上述信息自动在指定分支上创建 PR，并在本 Issue 下反馈结果。

provided by DevStation.

Welcome To openEuler Community

Hey @zhekaoshenwei , thanks for your contribution to the community.

Bot Usage Manual

I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands.

Contact Guide

If you have any questions, please contact the SIG: Kernel ,
and any of the maintainers: @hanjunguo, @oekernel, @sanglipeng, @wkfxxx, @zeng_zhaorong ,
and any of the committers: @CTC-XiboWang, @Frank_Sae, @GoGo_phytium, @GongLei-, @LiuYongQiang0816, @SuperSix173, @Tankll2021, @TrueAI, @allen-shi, @baratta, @bibo_mao, @caixu-blue, @chen-jun-hw, @chenjiesong, @chenjunxin1992, @chenke2026, @chiqijun, @chriszjh, @duanqiangwen, @eingesch, @fangfeng123, @fanghaiqinghw, @gaojuxin09, @gouhao2022, @guohaocs2c, @guzitao, @hanjunguo, @hanliyang, @hellotcc, @henryze, @hewanhan, @hjx_gitff, @hongbo-lee, @hongwu-wang, @htforge, @hu-chunzhi, @hunan4222, @jackknight, @jerry_lilijun, @jiayi0118, @junlong-zheng, @juntianlinux, @kailiu42, @kaitiandu, @kazero00, @kevinzhu1, @kile2009, @koishimind, @kongzizaixian, @kylin-mayukun, @leoliu-oc, @li-huisong, @linan888, @linyunsheng, @liulongfang, @liyihang0226, @lostway1, @lujialin2, @mao-hongbo, @markyuan4ta21, @mawupeng, @mingqian218472, @mingrui-liu, @mufengyan, @pigalsofine, @robinorg, @rock_hw, @sanglipeng, @shu-shengming, @shuaijiakun, @sming56_admin, @stavewu, @stkid, @sun_nanyong, @wangboe2022, @wanghang73, @wenzhiwei11, @whoisxxx, @wkfxxx, @woqidaideshi, @wsoydl, @xingmz1, @xukuohai, @yeweihua999, @ygn-ndwd-official, @yonghu_4dc5, @young-sun, @yubo-liu1, @yuehaibing_planb, @yuzenghui1, @zhang-changzhong, @zhangyi089, @zhujianwei001, @zichengqu, @zouyipeng, @zqiao216 .

issue处理注意事项:
1. 提交正常修复分支的修复PR时,必须关联当前issue,否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复;
注: 内容的关键词(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.

影响性分析说明:

openEuler评分: (评分和向量)

受影响版本排查(受影响/不受影响):
1.master(6.18.18):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):

修复是否涉及abi变化(是/否)：
1.master(6.18.18):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):

原因说明：
1.master(6.18.18):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):

原因说明填写请参考下方表格(注意：版本是否受影响和版本的原因说明必须对应，例如master版本分支受影响，那原因说明只能是受影响对应的原因之一!)：

issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

说明：补丁链接仅供初步排查参考，实际可用性请人工再次确认，补丁下载验证可使用CVE补丁工具。
若补丁不准确，烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息，便于我们不断优化工具，不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1

@zhekaoshenwei CVE信息从NVD同步成功, 稍后请重新加载页面.

CVE-2026-63808

影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:

exfat: fix potential use-after-free in exfat_find_dir_entry()

In exfat_find_dir_entry(), the buffer_head obtained from
exfat_get_dentry() is released with brelse(bh) before the fall-through
TYPE_EXTEND branch reads the directory entry through ep (which points
into bh->b_data):

brelse(bh);
if (entry_type == TYPE_EXTEND) {
	...
	len = exfat_extract_uni_name(ep, entry_uniname);
	...
}

After brelse() drops our reference, nothing guarantees that the
underlying page backing bh->b_data remains valid for the subsequent
exfat_extract_uni_name() read. This is the same pattern fixed in
commit fc961522ddbd ("exfat: Fix potential use after free in
exfat_load_upcase_table()").

Move brelse(bh) so it runs after ep is no longer dereferenced on
each branch.

Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y

• CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image
  (long filename with same-hash collisions forcing the TYPE_EXTEND path).
  With a debug-only invalidate_bdev() inserted between brelse(bh) and
  the ep read to make the stale-deref window deterministic, the
  unpatched kernel faults:

  BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0
  BUG: unable to handle page fault for address: ffff88801a5fa0c2
  Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
  RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0

With this patch applied, the same instrumented harness completes
cleanly under the same sanitizer stack. I have not reproduced a
crash on an uninstrumented kernel under ordinary reclaim; the
instrumented A/B establishes the lifetime violation and that the
patch closes it, not an unaided triggerability claim.

The Linux kernel CVE team has assigned CVE-2026-63808 to this issue.

openEuler评分:(评分和向量)
9.8
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否

原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中
10.openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中

@mingrui-liu 经过 cve-manager 解析, 已分析的内容如下表所示:

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

/check-issue

@mingrui-liu 经过 cve-manager 解析, 已分析的内容如下表所示:

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

/check-issue

@mingrui-liu 经过 cve-manager 解析, 已分析的内容如下表所示:

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

/check-issue

@mingrui-liu 经过 cve-manager 解析, 已分析的内容如下表所示:

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

CVE-2026-63808

影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:

exfat: fix potential use-after-free in exfat_find_dir_entry()

In exfat_find_dir_entry(), the buffer_head obtained from
exfat_get_dentry() is released with brelse(bh) before the fall-through
TYPE_EXTEND branch reads the directory entry through ep (which points
into bh->b_data):

    brelse(bh);
    if (entry_type == TYPE_EXTEND) {
            ...
            len = exfat_extract_uni_name(ep, entry_uniname);
            ...
    }

After brelse() drops our reference, nothing guarantees that the
underlying page backing bh->b_data remains valid for the subsequent
exfat_extract_uni_name() read. This is the same pattern fixed in
commit fc961522ddbd ("exfat: Fix potential use after free in
exfat_load_upcase_table()").

Move brelse(bh) so it runs after ep is no longer dereferenced on
each branch.

Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y

• CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image
  (long filename with same-hash collisions forcing the TYPE_EXTEND path).
  With a debug-only invalidate_bdev() inserted between brelse(bh) and
  the ep read to make the stale-deref window deterministic, the
  unpatched kernel faults:

  BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0
  BUG: unable to handle page fault for address: ffff88801a5fa0c2
  Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
  RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0

With this patch applied, the same instrumented harness completes
cleanly under the same sanitizer stack. I have not reproduced a
crash on an uninstrumented kernel under ordinary reclaim; the
instrumented A/B establishes the lifetime violation and that the
patch closes it, not an unaided triggerability claim.

openEuler评分:(评分和向量)
9.8
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否

原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不能被攻击者触发
3.openEuler-22.03-LTS-SP3:正常修复
4.openEuler-22.03-LTS-SP4:正常修复
5.openEuler-24.03-LTS:正常修复
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复
8.openEuler-24.03-LTS-SP2:正常修复
9.openEuler-24.03-LTS-SP3:正常修复
10.openEuler-24.03-LTS-SP4:正常修复

@mingrui-liu 经过 cve-manager 解析, 已分析的内容如下表所示:

请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.

经过cve-manager解析，部分分支PR未合入，如红色字体所示：

原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不能被攻击者触发
3.openEuler-22.03-LTS-SP4:正常修复(PR未合入)
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复(PR未合入)
6.openEuler-24.03-LTS-SP3:正常修复(PR未合入)
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:正常修复(PR未合入)
9.openEuler-24.03-LTS:正常修复(PR未合入)
10.openEuler-24.03-LTS-SP2:正常修复(PR未合入)