issue处理注意事项:
1. 提交正常修复分支的修复PR时,必须关联当前issue,否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复;
注: 内容的关键词(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.
影响性分析说明:
openEuler评分: (评分和向量)
受影响版本排查(受影响/不受影响):
1.master(6.18.18):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
修复是否涉及abi变化(是/否)：
1.master(6.18.18):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明：
1.master(6.18.18):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明填写请参考下方表格(注意：版本是否受影响和版本的原因说明必须对应，例如master版本分支受影响，那原因说明只能是受影响对应的原因之一!)：
分支状态 |
原因说明 | 使用场景 |
|---|---|---|
| 受影响 | 正常修复 | 受影响且需要修复（包含升级版本修复）的漏洞； 受影响且已经修复的漏洞（历史修复PR也需要关联issue）； 若因特殊原因无法修复，应修改原因说明为【不修复-特殊原因】，并在安委会备案相关情况。 |
| 受影响 | 漏洞仍在分析中 | 已关注到相关漏洞，正在处理，未明确漏洞影响和修复方案。 |
| 受影响 | 暂不修复-暂无解决方案或补丁 | 当前没有可用的修复或补救措施。【影响性分析】中应包含有关为什么没有修复或补救措施的详细说明、上游相关PR等。 |
| 受影响 | 不修复-超出修复范围 | 没有漏洞的修复计划。当版本停维、软件包宣布生命周期终止或弃用使用。 |
| 受影响 | 不修复-特殊原因导致不再修复 | 如存在其他特殊情况不修复相关漏洞，或评估后无法升级修复，应在openEuler社区安全委员会例会进行说明备案。 【影响性分析】中应包含不发布修复的详细说明、特殊情况还应有安委会会议纪要。 |
| 不受影响 | 不受影响-组件不存在 | 软件不受影响，因为易受攻击的组件不在产品中。 |
| 不受影响 | 不受影响-已有内置的内联控制或缓解措施 | 内置的内联控制或缓解措施可防止攻击者利用漏洞 |
| 不受影响 | 不受影响-漏洞代码不能被攻击者触发 | 易受攻击的组件存在，并且该组件包含易受攻击的代码。但是，易受攻击的代码的使用方式使得攻击者无法进行任何预期的攻击。 |
| 不受影响 | 不受影响-漏洞代码不在执行路径 | 易受影响的代码在执行过程中不可访问，包括产品的非预期状态。产品不使用也不执行的组件。 |
| 不受影响 | 不受影响-漏洞代码不存在 | 产品不受影响，因为漏洞背后的代码在产品中不存在。与component_not_present不同的是，有问题的组件存在，但由于某种原因（例如安全的编译器选项）使漏洞的特定代码不存在于组件中。 |
issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue
检测到新建 CVE Issue，CVE-ID: CVE-2026-68414。
你可以通过以下两种方式使用 CVE 修复服务：
-
分支影响分析
- 在本 Issue 下评论：
/analysis_branches - 系统将自动分析各个分支是否受影响，并在本 Issue 下给出表格形式的分析结果；
- 在本 Issue 下评论：
-
在指定分支上创建 PR（修复提交）
- 在本 Issue 下按如下格式评论（字段均为必填，每个字段单独一行）：
/create_pr
branch: OLK-6.6 OLK-5.10
name: dev
email: dev@devstation.com
backport-engine: mystique
- 说明：
branch: 需要创建 PR 的目标分支列表，例如OLK-6.6 OLK-5.10；name: PR 签名人姓名（如责任人或安全负责人）；email: PR 签名人邮箱；backport-engine（可选）: 回移植引擎，可设为mystique切换迁移方案，不填则使用默认引擎；
系统会根据上述信息自动在指定分支上创建 PR，并在本 Issue 下反馈结果。
provided by DevStation.
Welcome To openEuler Community
Hey @openeuler-ci-bot , thanks for your contribution to the community.
Bot Usage Manual
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands.
Contact Guide
If you have any questions, please contact the SIG: Kernel ,
and any of the maintainers: @hanjunguo, @oekernel, @sanglipeng, @wkfxxx, @zeng_zhaorong ,
and any of the committers: @CTC-XiboWang, @Frank_Sae, @GoGo_phytium, @GongLei-, @LiuYongQiang0816, @SuperSix173, @Tankll2021, @TrueAI, @allen-shi, @baratta, @bibo_mao, @caixu-blue, @chen-jun-hw, @chenjiesong, @chenjunxin1992, @chenke2026, @chiqijun, @chriszjh, @duanqiangwen, @eingesch, @fangfeng123, @fanghaiqinghw, @gaojuxin09, @gouhao2022, @guohaocs2c, @guzitao, @hanjunguo, @hanliyang, @hellotcc, @henryze, @hewanhan, @hjx_gitff, @hongbo-lee, @hongwu-wang, @htforge, @hu-chunzhi, @hunan4222, @jackknight, @jerry_lilijun, @jiayi0118, @junlong-zheng, @juntianlinux, @kailiu42, @kaitiandu, @kazero00, @kevinzhu1, @kile2009, @klmengkd, @koishimind, @kongzizaixian, @kylin-mayukun, @leoliu-oc, @li-huisong, @linan888, @linyunsheng, @liulongfang, @liyihang0226, @lostway1, @lujialin2, @mao-hongbo, @markyuan4ta21, @mawupeng, @mingqian218472, @mingrui-liu, @mufengyan, @pigalsofine, @robinorg, @rock_hw, @sanglipeng, @shu-shengming, @shuaijiakun, @sming56_admin, @stavewu, @stkid, @sun_nanyong, @wangboe2022, @wanghang73, @wenzhiwei11, @whoisxxx, @wkfxxx, @woqidaideshi, @wsoydl, @xingmz1, @xukuohai, @yeweihua999, @ygn-ndwd-official, @yonghu_4dc5, @young-sun, @yubo-liu1, @yuehaibing_planb, @yuzenghui1, @zhang-changzhong, @zhangyi089, @zhujianwei001, @zichengqu, @zouyipeng, @zqiao216 .
说明：补丁链接仅供初步排查参考，实际可用性请人工再次确认，补丁下载验证可使用CVE补丁工具。
若补丁不准确，烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息，便于我们不断优化工具，不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1
CVE-2026-68414
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel sched scan results work on unregister
cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a
driver result notification while a scheduled scan request is present. The
work callback recovers the containing cfg80211_registered_device and then
locks the wiphy and walks the scheduled-scan request list.
wiphy_unregister() already makes the wiphy unreachable and drains rdev work
items before cfg80211_dev_free() can release the object, but it does not
drain sched_scan_res_wk. A queued or running result work item can therefore
cross the unregister/free boundary and access freed rdev state.
The buggy scenario involves two paths, with each column showing the order
within that path:
scheduled-scan result path: unregister/free path:
- cfg80211_sched_scan_results() 1. interface teardown stops and
queues rdev->sched_scan_res_wk. removes the scheduled scan request. - cfg80211_wq starts the work 2. wiphy_unregister() drains other
item and recovers rdev. rdev work items. - The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and
and walks rdev state. frees rdev.
Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev
work items. cancel_work_sync() removes a pending result notification and
waits for an already running callback, so cfg80211_dev_free() cannot free
rdev while this work item is still active.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530
Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]
Read of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
cfg80211_sched_scan_results_wk+0x4a6/0x530
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x224/0x430
kasan_report+0xac/0xe0
lockdep_hardirqs_on_prepare+0xea/0x1a0
process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212)
lock_is_held_type+0x8f/0x100
worker_thread+0x5ad/0xfd0
__kthread_parkme+0xc6/0x200
kthread+0x31e/0x410
trace_hardirqs_on+0x1a/0x170
ret_from_fork+0x576/0x810
__switch_to+0x57e/0xe20
__switch_to_asm+0x33/0x70
ret_from_fork_asm+0x1a/0x30
The Linux kernel CVE team has assigned CVE-2026-68414 to this issue.
openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:暂不修复-漏洞仍在分析中
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中
10.openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中
@koishimind 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: cancel sched scan results work on unregistercfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from adriver result notification while a scheduled scan request is present. Thework callback recovers the containing cfg80211_registered_device and thenlocks the wiphy and walks the scheduled-scan request list.wiphy_unregister() already makes the wiphy unreachable and drains rdev workitems before cfg80211_dev_free() can release the object, but it does notdrain sched_scan_res_wk. A queued or running result work item can thereforecross the unregister/free boundary and access freed rdev state.The buggy scenario involves two paths, with each column showing the orderwithin that path:scheduled-scan result path: unregister/free path:1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request.2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items.3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev.Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdevwork items. cancel_work_sync() removes a pending result notification andwaits for an already running callback, so cfg80211_dev_free() cannot freerdev while this work item is still active.Validation reproduced this kernel report:BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]Read of size 8Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30The Linux kernel CVE team has assigned CVE-2026-68414 to this issue. |
| 已分析 | 2.openEulerScore | 5.5 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:漏洞仍在分析中,openEuler-22.03-LTS-SP4:漏洞仍在分析中,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:漏洞仍在分析中,openEuler-24.03-LTS-SP3:漏洞仍在分析中,openEuler-24.03-LTS-SP4:漏洞仍在分析中,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
经过 cve-manager 解析 openEuler评分 已改变 需要您及时进行审核,以便maintainer进行后续操作.
经过 cve-manager 解析 openEuler评分 已改变 需要您及时进行审核,以便maintainer进行后续操作.
一、漏洞信息
漏洞编号：CVE-2026-68414
漏洞归属组件：kernel
漏洞归属的版本：4.19.140,4.19.194,4.19.90,5.10.0,6.1.19,6.12.33,6.18.18,6.4.0,6.6.0
CVSS评分：
BaseScore：7.5 High
Vector：CVSS:3.1/AV:A/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H
漏洞简述：
In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: cancel sched scan results work on unregistercfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from adriver result notification while a scheduled scan request is present. Thework callback recovers the containing cfg80211_registered_device and thenlocks the wiphy and walks the scheduled-scan request list.wiphy_unregister() already makes the wiphy unreachable and drains rdev workitems before cfg80211_dev_free() can release the object, but it does notdrain sched_scan_res_wk. A queued or running result work item can thereforecross the unregister/free boundary and access freed rdev state.The buggy scenario involves two paths, with each column showing the orderwithin that path:scheduled-scan result path: unregister/free path:1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request.2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items.3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev.Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdevwork items. cancel_work_sync() removes a pending result notification andwaits for an already running callback, so cfg80211_dev_free() cannot freerdev while this work item is still active.Validation reproduced this kernel report:BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]Read of size 8Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30
漏洞公开时间：2026-08-10 21:20:35
漏洞创建时间：2026-08-11 11:46:56
漏洞详情参考链接：
https://nvd.nist.gov/vuln/detail/CVE-2026-68414
更多参考(点击展开)
漏洞分析指导链接：
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
七彩瞬析开源风险感知平台
漏洞补丁信息：
详情(点击展开)
二、漏洞分析结构反馈
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:wifi: cfg80211: cancel sched scan results work on unregistercfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from adriver result notification while a scheduled scan request is present. Thework callback recovers the containing cfg80211_registered_device and thenlocks the wiphy and walks the scheduled-scan request list.wiphy_unregister() already makes the wiphy unreachable and drains rdev workitems before cfg80211_dev_free() can release the object, but it does notdrain sched_scan_res_wk. A queued or running result work item can thereforecross the unregister/free boundary and access freed rdev state.The buggy scenario involves two paths, with each column showing the orderwithin that path:scheduled-scan result path: unregister/free path:1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request.2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items.3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev.Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdevwork items. cancel_work_sync() removes a pending result notification andwaits for an already running callback, so cfg80211_dev_free() cannot freerdev while this work item is still active.Validation reproduced this kernel report:BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211]Read of size 8Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30The Linux kernel CVE team has assigned CVE-2026-68414 to this issue.
openEuler评分：
5.5
Vector：CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响)：
1.master(6.18.40):不受影响
2.openEuler-20.03-LTS-SP4(4.19.90):受影响
3.openEuler-22.03-LTS-SP4(5.10.0):受影响
4.openEuler-24.03-LTS-Next(6.6.0):不受影响
5.openEuler-24.03-LTS-SP1(6.6.0):受影响
6.openEuler-24.03-LTS-SP3(6.6.0):受影响
7.openEuler-24.03-LTS-SP4(6.6.0):受影响
8.openEuler-22.03-LTS-SP3(5.10.0):受影响
9.openEuler-24.03-LTS(6.6.0):受影响
10.openEuler-24.03-LTS-SP2(6.6.0):受影响
修复是否涉及abi变化(是/否)：
1.master(6.18.40):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP4(5.10.0):否
4.openEuler-24.03-LTS-Next(6.6.0):否
5.openEuler-24.03-LTS-SP1(6.6.0):否
6.openEuler-24.03-LTS-SP3(6.6.0):否
7.openEuler-24.03-LTS-SP4(6.6.0):否
8.openEuler-22.03-LTS-SP3(5.10.0):否
9.openEuler-24.03-LTS(6.6.0):否
10.openEuler-24.03-LTS-SP2(6.6.0):否
原因说明：
1.master(6.18.40):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4(4.19.90):漏洞仍在分析中
3.openEuler-22.03-LTS-SP4(5.10.0):漏洞仍在分析中
4.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1(6.6.0):漏洞仍在分析中
6.openEuler-24.03-LTS-SP3(6.6.0):漏洞仍在分析中
7.openEuler-24.03-LTS-SP4(6.6.0):漏洞仍在分析中
8.openEuler-22.03-LTS-SP3(5.10.0):不修复-超出修复范围
9.openEuler-24.03-LTS(6.6.0):不修复-超出修复范围
10.openEuler-24.03-LTS-SP2(6.6.0):不修复-超出修复范围