issue处理注意事项:
1. 提交正常修复分支的修复PR时,必须关联当前issue,否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复;
注: 内容的关键词(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.
影响性分析说明:
openEuler评分: (评分和向量)
受影响版本排查(受影响/不受影响):
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
修复是否涉及abi变化(是/否)：
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明：
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明填写请参考下方表格(注意：版本是否受影响和版本的原因说明必须对应，例如master版本分支受影响，那原因说明只能是受影响对应的原因之一!)：
分支状态 |
原因说明 | 使用场景 |
|---|---|---|
| 受影响 | 正常修复 | 受影响且需要修复（包含升级版本修复）的漏洞； 受影响且已经修复的漏洞（历史修复PR也需要关联issue）； 若因特殊原因无法修复，应修改原因说明为【不修复-特殊原因】，并在安委会备案相关情况。 |
| 受影响 | 漏洞仍在分析中 | 已关注到相关漏洞，正在处理，未明确漏洞影响和修复方案。 |
| 受影响 | 暂不修复-暂无解决方案或补丁 | 当前没有可用的修复或补救措施。【影响性分析】中应包含有关为什么没有修复或补救措施的详细说明、上游相关PR等。 |
| 受影响 | 不修复-超出修复范围 | 没有漏洞的修复计划。当版本停维、软件包宣布生命周期终止或弃用使用。 |
| 受影响 | 不修复-特殊原因导致不再修复 | 如存在其他特殊情况不修复相关漏洞，或评估后无法升级修复，应在openEuler社区安全委员会例会进行说明备案。 【影响性分析】中应包含不发布修复的详细说明、特殊情况还应有安委会会议纪要。 |
| 不受影响 | 不受影响-组件不存在 | 软件不受影响，因为易受攻击的组件不在产品中。 |
| 不受影响 | 不受影响-已有内置的内联控制或缓解措施 | 内置的内联控制或缓解措施可防止攻击者利用漏洞 |
| 不受影响 | 不受影响-漏洞代码不能被攻击者触发 | 易受攻击的组件存在，并且该组件包含易受攻击的代码。但是，易受攻击的代码的使用方式使得攻击者无法进行任何预期的攻击。 |
| 不受影响 | 不受影响-漏洞代码不在执行路径 | 易受影响的代码在执行过程中不可访问，包括产品的非预期状态。产品不使用也不执行的组件。 |
| 不受影响 | 不受影响-漏洞代码不存在 | 产品不受影响，因为漏洞背后的代码在产品中不存在。与component_not_present不同的是，有问题的组件存在，但由于某种原因（例如安全的编译器选项）使漏洞的特定代码不存在于组件中。 |
issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue
检测到新建 CVE Issue，CVE-ID: CVE-2026-72420。
你可以通过以下两种方式使用 CVE 修复服务：
-
分支影响分析
- 在本 Issue 下评论：
/analysis_branches - 系统将自动分析各个分支是否受影响，并在本 Issue 下给出表格形式的分析结果；
- 在本 Issue 下评论：
-
在指定分支上创建 PR（修复提交）
- 在本 Issue 下按如下格式评论（
branch、name、email为必填字段，每个字段单独一行）：
- 在本 Issue 下按如下格式评论（
/create_pr
branch: OLK-6.6 OLK-5.10
name: dev
email: dev@devstation.com
backport-engine: opencode
- 说明：
branch: 需要创建 PR 的目标分支列表，例如OLK-6.6 OLK-5.10；name: PR 签名人姓名（如责任人或安全负责人）；email: PR 签名人邮箱；backport-engine（可选）：可选portgpt、mystique或opencode；不填时默认使用portgpt，建议使用opencode；
系统会根据上述信息自动在指定分支上创建 PR，并在本 Issue 下反馈结果。
provided by DevStation.
说明：补丁链接仅供初步排查参考，实际可用性请人工再次确认，补丁下载验证可使用CVE补丁工具。
若补丁不准确，烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息，便于我们不断优化工具，不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1
Welcome To openEuler Community
Hey @openeuler-ci-bot , thanks for your contribution to the community.
Bot Usage Manual
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands.
Contact Guide
If you have any questions, please contact the SIG: Kernel ,
and any of the maintainers: @hanjunguo, @oekernel, @sanglipeng, @wkfxxx, @zeng_zhaorong ,
and any of the committers: @CTC-XiboWang, @Frank_Sae, @GoGo_phytium, @GongLei-, @LiuYongQiang0816, @SuperSix173, @Tankll2021, @TrueAI, @YiweiZ, @allen-shi, @baratta, @bibo_mao, @caixu-blue, @chen-jun-hw, @chenjiesong, @chenjunxin1992, @chenke2026, @chiqijun, @chriszjh, @duanqiangwen, @eingesch, @fangfeng123, @fanghaiqinghw, @gang_he, @gaojuxin09, @gouhao2022, @guohaocs2c, @guzitao, @hanjunguo, @hanliyang, @hellotcc, @henryze, @hewanhan, @hjx_gitff, @hongwu-wang, @htforge, @hu-chunzhi, @hunan4222, @jackknight, @jerry_lilijun, @jiayi0118, @junlong-zheng, @juntianlinux, @kailiu42, @kaitiandu, @kazero00, @kevinzhu1, @kile2009, @klmengkd, @koishimind, @kongzizaixian, @kylin-mayukun, @leoliu-oc, @li-huisong, @linan888, @linyunsheng, @liulongfang, @liyihang0226, @lostway1, @lujialin2, @mao-hongbo, @markyuan4ta21, @mawupeng, @mingqian218472, @mingrui-liu, @mufengyan, @pigalsofine, @robinorg, @rock_hw, @sanglipeng, @shu-shengming, @shuaijiakun, @sming56_admin, @stavewu, @stkid, @sun_nanyong, @wangboe2022, @wanghang73, @wenzhiwei11, @whoisxxx, @wkfxxx, @woqidaideshi, @wsoydl, @xingmz1, @xukuohai, @yeweihua999, @ygn-ndwd-official, @yonghu_4dc5, @young-sun, @yubo-liu1, @yuehaibing_planb, @yuzenghui1, @zhang-changzhong, @zhangyi089, @zhujianwei001, @zichengqu, @zouyipeng, @zqiao216 .
CVE-2026-72420
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
KCSAN report:
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap
The Linux kernel CVE team has assigned CVE-2026-72420 to this issue.
openEuler评分:(评分和向量)
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:暂不修复-漏洞仍在分析中
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中
10.openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中
@wanghang73 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races while breaking stripe batchesKCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()on sh->dev[i].flags (plain word write vs. atomic bit op)..and .. one possible scenario is:CPU1 CPU2break_stripe_batch_list(sh1)-> handle sh2-> lock(sh2)-> sh2->batch_head = NULL-> unlock(sh2)-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)-> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags)-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_OverlapNo wait_up_bit(), CPU2 could be wait_on_bit() forever...Fix by :- Expand the protect zone.- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.- Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or ,- sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken.KCSAN report:================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_OverlapThe Linux kernel CVE team has assigned CVE-2026-72420 to this issue. |
| 已分析 | 2.openEulerScore | 8.8 |
| 已分析 | 3.openEulerVector | AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:漏洞仍在分析中,openEuler-22.03-LTS-SP4:漏洞仍在分析中,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:漏洞仍在分析中,openEuler-24.03-LTS-SP3:漏洞仍在分析中,openEuler-24.03-LTS-SP4:漏洞仍在分析中,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
/check-issue
@wanghang73 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races while breaking stripe batchesKCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()on sh->dev[i].flags (plain word write vs. atomic bit op)..and .. one possible scenario is:CPU1 CPU2break_stripe_batch_list(sh1)-> handle sh2-> lock(sh2)-> sh2->batch_head = NULL-> unlock(sh2)-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)-> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags)-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_OverlapNo wait_up_bit(), CPU2 could be wait_on_bit() forever...Fix by :- Expand the protect zone.- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.- Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or ,- sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken.KCSAN report:================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_OverlapThe Linux kernel CVE team has assigned CVE-2026-72420 to this issue. |
| 已分析 | 2.openEulerScore | 8.8 |
| 已分析 | 3.openEulerVector | AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:漏洞仍在分析中,openEuler-22.03-LTS-SP4:漏洞仍在分析中,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:漏洞仍在分析中,openEuler-24.03-LTS-SP3:漏洞仍在分析中,openEuler-24.03-LTS-SP4:漏洞仍在分析中,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
经过cve-manager解析，部分字段填写错误，如红色字体所示：
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races ...
openEuler评分: (评分和向量)
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:漏洞仍在分析中(结果填写错误)
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:漏洞仍在分析中(结果填写错误)
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:漏洞仍在分析中(结果填写错误)
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:漏洞仍在分析中(结果填写错误)
10.openEuler-24.03-LTS-SP4:漏洞仍在分析中(结果填写错误)
经过cve-manager解析，部分字段填写错误，如红色字体所示：
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races ...
openEuler评分: (评分和向量)
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:漏洞仍在分析中(结果填写错误)
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:漏洞仍在分析中(结果填写错误)
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:漏洞仍在分析中(结果填写错误)
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:漏洞仍在分析中(结果填写错误)
10.openEuler-24.03-LTS-SP4:漏洞仍在分析中(结果填写错误)
CVE-2026-72420
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
KCSAN report:
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap
The Linux kernel CVE team has assigned CVE-2026-72420 to this issue.
openEuler评分:(评分和向量)
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中
10.openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中
@wanghang73 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races while breaking stripe batchesKCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()on sh->dev[i].flags (plain word write vs. atomic bit op)..and .. one possible scenario is:CPU1 CPU2break_stripe_batch_list(sh1)-> handle sh2-> lock(sh2)-> sh2->batch_head = NULL-> unlock(sh2)-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)-> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags)-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_OverlapNo wait_up_bit(), CPU2 could be wait_on_bit() forever...Fix by :- Expand the protect zone.- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.- Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or ,- sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken.KCSAN report:================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_OverlapThe Linux kernel CVE team has assigned CVE-2026-72420 to this issue. |
| 已分析 | 2.openEulerScore | 8.8 |
| 已分析 | 3.openEulerVector | AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不修复-超出修复范围,openEuler-22.03-LTS-SP4:不修复-超出修复范围,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
CVE-2026-72420
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: avoid R5_Overlap races while breaking stripe batches
KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()
on sh->dev[i].flags (plain word write vs. atomic bit op)..
and .. one possible scenario is:
CPU1 CPU2
break_stripe_batch_list(sh1)
-> handle sh2
-> lock(sh2)
-> sh2->batch_head = NULL
-> unlock(sh2)
-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)
-> wake_up_bit(sh2->dev[i].flags)
raid5_make_request()
-> add_all_stripe_bios(sh2)
-> lock(sh2)
-> stripe_bio_overlaps(sh2) returns true
batch_head is NULL, so new bio overlap
exist bio on sh2 -> true
-> set_bit(R5_Overlap, sh2->dev[i].flags)
-> unlock(sh2)
-> wait_on_bit(sh2->dev[i].flags)
-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap
No wait_up_bit(), CPU2 could be wait_on_bit() forever...
Fix by :
- Expand the protect zone.
- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.
- Move sh/head_sh->batch_head = NULL to the end of protected zone , and ,
any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps()
under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been
set and the prior R5_Overlap waiters worken.
- see batch_head != null, and , is rejected by stripe_bio_overlaps()
KCSAN report:
BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request
write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0:
raid5_make_request+0xea0/0x2930
md_handle_request+0x4a2/0xa40
md_submit_bio+0x109/0x1a0
__submit_bio+0x2ec/0x390
submit_bio_noacct_nocheck+0x457/0x710
submit_bio_noacct+0x2a7/0xc20
submit_bio+0x56/0x250
blkdev_direct_IO+0x54c/0xda0
blkdev_write_iter+0x38f/0x570
aio_write+0x22b/0x490
io_submit_one+0xa51/0xf70
__x64_sys_io_submit+0xf7/0x220
x64_sys_call+0x1907/0x1c60
do_syscall_64+0x130/0x570
entry_SYSCALL_64_after_hwframe+0x76/0x7e
read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5:
break_stripe_batch_list+0x249/0x480
handle_stripe_clean_event+0x720/0x9b0
handle_stripe+0x32fb/0x4500
handle_active_stripes.isra.0+0x6e0/0xa50
raid5d+0x7e0/0xba0
md_thread+0x15a/0x2d0
kthread+0x1e3/0x220
ret_from_fork+0x37a/0x410
ret_from_fork_asm+0x1a/0x30
value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap
The Linux kernel CVE team has assigned CVE-2026-72420 to this issue.
openEuler评分:(评分和向量)
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:正常修复
10.openEuler-24.03-LTS-SP4:正常修复
@wanghang73 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races while breaking stripe batchesKCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()on sh->dev[i].flags (plain word write vs. atomic bit op)..and .. one possible scenario is:CPU1 CPU2break_stripe_batch_list(sh1)-> handle sh2-> lock(sh2)-> sh2->batch_head = NULL-> unlock(sh2)-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)-> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags)-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_OverlapNo wait_up_bit(), CPU2 could be wait_on_bit() forever...Fix by :- Expand the protect zone.- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.- Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or ,- sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken.KCSAN report:================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_OverlapThe Linux kernel CVE team has assigned CVE-2026-72420 to this issue. |
| 已分析 | 2.openEulerScore | 8.8 |
| 已分析 | 3.openEulerVector | AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不修复-超出修复范围,openEuler-22.03-LTS-SP4:不修复-超出修复范围,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:正常修复,openEuler-24.03-LTS-SP3:正常修复,openEuler-24.03-LTS-SP4:正常修复,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
经过cve-manager解析，部分分支PR未合入，如红色字体所示：
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:不修复-超出修复范围
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复(PR未合入)
6.openEuler-24.03-LTS-SP3:正常修复(PR未合入)
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:不修复-超出修复范围
9.openEuler-24.03-LTS:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围
经过cve-manager解析，部分分支PR未合入，如红色字体所示：
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:不修复-超出修复范围
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复
6.openEuler-24.03-LTS-SP3:正常修复(PR未合入)
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:不修复-超出修复范围
9.openEuler-24.03-LTS:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围
经过cve-manager解析，部分分支PR未合入，如红色字体所示：
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:不修复-超出修复范围
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复
6.openEuler-24.03-LTS-SP3:正常修复
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:不修复-超出修复范围
9.openEuler-24.03-LTS:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围
一、漏洞信息
漏洞编号：CVE-2026-72420
漏洞归属组件：kernel
漏洞归属的版本：4.19.140,4.19.194,4.19.90,5.10.0,6.1.19,6.12.33,6.18.18,6.4.0,6.6.0
CVSS评分：
BaseScore：8.8 High
Vector：CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
漏洞简述：
In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races while breaking stripe batchesKCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()on sh->dev[i].flags (plain word write vs. atomic bit op)..and .. one possible scenario is:CPU1 CPU2break_stripe_batch_list(sh1)-> handle sh2-> lock(sh2)-> sh2->batch_head = NULL-> unlock(sh2)-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)-> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags)-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_OverlapNo wait_up_bit(), CPU2 could be wait_on_bit() forever...Fix by :- Expand the protect zone.- Use batch_head s device flag s snaphot when no held head_sh->stripe_lock.- Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken.KCSAN report:================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap
漏洞公开时间：2026-08-15 14:22:15
漏洞创建时间：2026-08-18 04:19:27
漏洞详情参考链接：
https://nvd.nist.gov/vuln/detail/CVE-2026-72420
更多参考(点击展开)
漏洞分析指导链接：
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
七彩瞬析开源风险感知平台
漏洞补丁信息：
详情(点击展开)
二、漏洞分析结构反馈
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:md/raid5: avoid R5_Overlap races while breaking stripe batchesKCSAN report a race in break_stripe_batch_list() vs. raid5_make_request()on sh->dev[i].flags (plain word write vs. atomic bit op)..and .. one possible scenario is:CPU1 CPU2break_stripe_batch_list(sh1)-> handle sh2-> lock(sh2)-> sh2->batch_head = NULL-> unlock(sh2)-> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags)-> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags)-> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_OverlapNo wait_up_bit(), CPU2 could be wait_on_bit() forever...Fix by :- Expand the protect zone.- Use batch_head's device flag's snaphot when no held head_sh->stripe_lock.- Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either:- see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or ,- sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken.KCSAN report:================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_OverlapThe Linux kernel CVE team has assigned CVE-2026-72420 to this issue.
openEuler评分：
8.8
Vector：CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响)：
1.master(6.18.40):不受影响
2.openEuler-20.03-LTS-SP4(4.19.90):受影响
3.openEuler-22.03-LTS-SP4(5.10.0):受影响
4.openEuler-24.03-LTS-Next(6.6.0):不受影响
5.openEuler-24.03-LTS-SP1(6.6.0):受影响
6.openEuler-24.03-LTS-SP3(6.6.0):受影响
7.openEuler-24.03-LTS-SP4(6.6.0):受影响
8.openEuler-22.03-LTS-SP3(5.10.0):受影响
9.openEuler-24.03-LTS(6.6.0):受影响
10.openEuler-24.03-LTS-SP2(6.6.0):受影响
修复是否涉及abi变化(是/否)：
1.master(6.18.40):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP4(5.10.0):否
4.openEuler-24.03-LTS-Next(6.6.0):否
5.openEuler-24.03-LTS-SP1(6.6.0):否
6.openEuler-24.03-LTS-SP3(6.6.0):否
7.openEuler-24.03-LTS-SP4(6.6.0):否
8.openEuler-22.03-LTS-SP3(5.10.0):否
9.openEuler-24.03-LTS(6.6.0):否
10.openEuler-24.03-LTS-SP2(6.6.0):否
原因说明：
1.master(6.18.40):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4(4.19.90):不修复-超出修复范围
3.openEuler-22.03-LTS-SP4(5.10.0):不修复-超出修复范围
4.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1(6.6.0):正常修复
6.openEuler-24.03-LTS-SP3(6.6.0):正常修复
7.openEuler-24.03-LTS-SP4(6.6.0):正常修复
8.openEuler-22.03-LTS-SP3(5.10.0):不修复-超出修复范围
9.openEuler-24.03-LTS(6.6.0):不修复-超出修复范围
10.openEuler-24.03-LTS-SP2(6.6.0):不修复-超出修复范围