检测到新建 CVE Issue，CVE-ID: CVE-2026-89488。
你可以通过以下两种方式使用 CVE 修复服务：
-
分支影响分析
- 在本 Issue 下评论：
/analysis_branches - 系统将自动分析各个分支是否受影响，并在本 Issue 下给出表格形式的分析结果；
- 在本 Issue 下评论：
-
在指定分支上创建 PR（修复提交）
- 在本 Issue 下按如下格式评论（
branch、name、email为必填字段，每个字段单独一行）：
- 在本 Issue 下按如下格式评论（
/create_pr
branch: OLK-6.6 OLK-5.10
name: dev
email: dev@devstation.com
backport-engine: opencode
- 说明：
branch: 需要创建 PR 的目标分支列表，例如OLK-6.6 OLK-5.10；name: PR 签名人姓名（如责任人或安全负责人）；email: PR 签名人邮箱；backport-engine（可选）：可选portgpt、mystique或opencode；不填时默认使用portgpt，建议使用opencode；
系统会根据上述信息自动在指定分支上创建 PR，并在本 Issue 下反馈结果。
provided by DevStation.
openeuler-ci-botissue处理注意事项:
1. 提交正常修复分支的修复PR时,必须关联当前issue,否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复;
注: 内容的关键词(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.
影响性分析说明:
openEuler评分: (评分和向量)
受影响版本排查(受影响/不受影响):
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
修复是否涉及abi变化(是/否)：
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明：
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明填写请参考下方表格(注意：版本是否受影响和版本的原因说明必须对应，例如master版本分支受影响，那原因说明只能是受影响对应的原因之一!)：
分支状态 |
原因说明 | 使用场景 |
|---|---|---|
| 受影响 | 正常修复 | 受影响且需要修复（包含升级版本修复）的漏洞； 受影响且已经修复的漏洞（历史修复PR也需要关联issue）； 若因特殊原因无法修复，应修改原因说明为【不修复-特殊原因】，并在安委会备案相关情况。 |
| 受影响 | 暂不修复-漏洞仍在分析中 | 已关注到相关漏洞，正在处理，未明确漏洞影响和修复方案。 |
| 受影响 | 暂不修复-暂无解决方案或补丁 | 当前没有可用的修复或补救措施。【影响性分析】中应包含有关为什么没有修复或补救措施的详细说明、上游相关PR等。 |
| 受影响 | 不修复-超出修复范围 | 没有漏洞的修复计划。当版本停维、软件包宣布生命周期终止或弃用使用。 |
| 受影响 | 不修复-特殊原因导致不再修复 | 如存在其他特殊情况不修复相关漏洞，或评估后无法升级修复，应在openEuler社区安全委员会例会进行说明备案。 【影响性分析】中应包含不发布修复的详细说明、特殊情况还应有安委会会议纪要。 |
| 不受影响 | 不受影响-组件不存在 | 软件不受影响，因为易受攻击的组件不在产品中。 |
| 不受影响 | 不受影响-已有内置的内联控制或缓解措施 | 内置的内联控制或缓解措施可防止攻击者利用漏洞 |
| 不受影响 | 不受影响-漏洞代码不能被攻击者触发 | 易受攻击的组件存在，并且该组件包含易受攻击的代码。但是，易受攻击的代码的使用方式使得攻击者无法进行任何预期的攻击。 |
| 不受影响 | 不受影响-漏洞代码不在执行路径 | 易受影响的代码在执行过程中不可访问，包括产品的非预期状态。产品不使用也不执行的组件。 |
| 不受影响 | 不受影响-漏洞代码不存在 | 产品不受影响，因为漏洞背后的代码在产品中不存在。与component_not_present不同的是，有问题的组件存在，但由于某种原因（例如安全的编译器选项）使漏洞的特定代码不存在于组件中。 |
issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue
Welcome To openEuler Community
Hey @zhangxiaoxv , thanks for your contribution to the community.
Bot Usage Manual
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands. You can self-configure the PR merge rules for this repository. For more details, please refer to Here.
Contact Guide
If you have any questions, please contact the SIG: Kernel ,
and any of the maintainers: @hanjunguo, @oekernel, @sanglipeng, @wkfxxx, @zeng_zhaorong ,
and any of the committers: @CTC-XiboWang, @Frank_Sae, @GoGo_phytium, @GongLei-, @LiuYongQiang0816, @SuperSix173, @Tankll2021, @TrueAI, @YiweiZ, @allen-shi, @alvin-ling, @baratta, @bibo_mao, @caixu-blue, @chen-jun-hw, @chenjiesong, @chenjunxin1992, @chenke2026, @chiqijun, @chriszjh, @duanqiangwen, @eingesch, @fangfeng123, @fanghaiqinghw, @gang_he, @gaojuxin09, @gouhao2022, @guohaocs2c, @guzitao, @hanjunguo, @hanliyang, @hellotcc, @henryze, @hewanhan, @hjx_gitff, @hongwu-wang, @howard_lu, @htforge, @hu-chunzhi, @hunan4222, @jackknight, @jerry_lilijun, @jiayi0118, @junlong-zheng, @juntianlinux, @kailiu42, @kaitiandu, @kazero00, @kevinzhu1, @kile2009, @klmengkd, @koishimind, @kongzizaixian, @kunlun_spurs, @kylin-mayukun, @leoliu-oc, @li-huisong, @linan888, @linyunsheng, @liulongfang, @liyihang0226, @lostway1, @lujialin2, @mao-hongbo, @markyuan4ta21, @mawupeng, @mingqian218472, @mingrui-liu, @mufengyan, @nebulamatrix_rdma, @peterpangogogo, @pigalsofine, @robinorg, @rock_hw, @sanglipeng, @shu-shengming, @shuaijiakun, @siyanteng, @sming56_admin, @stavewu, @stkid, @sun_nanyong, @wangboe2022, @wanghang73, @wenzhiwei11, @whoisxxx, @wkfxxx, @woqidaideshi, @wsoydl, @xingmz1, @xukuohai, @yeweihua999, @ygn-ndwd-official, @yonghu_4dc5, @young-sun, @yubo-liu1, @yuehaibing_planb, @yuzenghui1, @zhang-changzhong, @zhangyi089, @zhujianwei001, @zichengqu, @zouyipeng, @zqiao216 .
说明：补丁链接仅供初步排查参考，实际可用性请人工再次确认，补丁下载验证可使用CVE补丁工具。
若补丁不准确，烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息，便于我们不断优化工具，不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1
@zhangxiaoxv CVE信息从NVD同步失败, 请稍后重试, 或者数据源不存在.
CVE-2026-89488
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace.
The Linux kernel CVE team has assigned CVE-2026-89488 to this issue.
openEuler评分:(评分和向量)
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:暂不修复-漏洞仍在分析中
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中
10.openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中
@wkfxxx 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:openvswitch: Fix CT limit teardown use-after-freePacket processing uses CT limit state under RCU, while netns teardownfrees that state under ovs_mutex. The CT limit pointer was neither removedfrom readers nor protected by a grace period, allowing packet processing todereference the freed state.An unprivileged user can trigger this bug from a user and networknamespace, causing a slab-use-after-free in ovs_ct_execute() when thenetns is torn down.Publish the CT limit pointer through RCU, remove it before teardown, andwait for readers before freeing its contents. Keep ovs_mutex aroundindividual CT limit updates, and use the RCU read-side lock while GETtraverses the RCU-protected limit lists.Netns teardown detaches the RCU-protected CT limit state in the pernet.pre_exit callback while holding ovs_mutex. The pernet core guarantees anRCU grace period between the .pre_exit and .exit callbacks, so the .exitcallback completes the teardown without adding any extra synchronization.The netlink command handlers do not need NULL checks because the userspacenetlink socket holds an active reference to its network namespace while arequest is processed. The per-netns exit path therefore cannot runconcurrently with SET, DEL, or GET for that socket's namespace.The Linux kernel CVE team has assigned CVE-2026-89488 to this issue. |
| 已分析 | 2.openEulerScore | 7.8 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
CVE-2026-89488
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace.
The Linux kernel CVE team has assigned CVE-2026-89488 to this issue.
openEuler评分:(评分和向量)
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中
10.openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中
@wkfxxx 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:openvswitch: Fix CT limit teardown use-after-freePacket processing uses CT limit state under RCU, while netns teardownfrees that state under ovs_mutex. The CT limit pointer was neither removedfrom readers nor protected by a grace period, allowing packet processing todereference the freed state.An unprivileged user can trigger this bug from a user and networknamespace, causing a slab-use-after-free in ovs_ct_execute() when thenetns is torn down.Publish the CT limit pointer through RCU, remove it before teardown, andwait for readers before freeing its contents. Keep ovs_mutex aroundindividual CT limit updates, and use the RCU read-side lock while GETtraverses the RCU-protected limit lists.Netns teardown detaches the RCU-protected CT limit state in the pernet.pre_exit callback while holding ovs_mutex. The pernet core guarantees anRCU grace period between the .pre_exit and .exit callbacks, so the .exitcallback completes the teardown without adding any extra synchronization.The netlink command handlers do not need NULL checks because the userspacenetlink socket holds an active reference to its network namespace while arequest is processed. The per-netns exit path therefore cannot runconcurrently with SET, DEL, or GET for that socket's namespace.The Linux kernel CVE team has assigned CVE-2026-89488 to this issue. |
| 已分析 | 2.openEulerScore | 7.8 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不修复-超出修复范围,openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-SP3:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
/create_pr
branch: OLK-5.10
name: Gu Bowen
email: gubowen5@huawei.com
CVE: CVE-2026-89488 · Workflow: 3da3aa4f015740fc86a809241813c4b2 · Attempt: 1
状态：已结束
| 分支 | 状态 | PR / 错误 | 结果说明 |
|---|---|---|---|
| OLK-5.10 | succeeded | https://gitcode.com/openeuler/kernel/merge_requests/28623 [source: cve_manager: empty, linux_cna: selected] |
CVE-2026-89488
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace.
The Linux kernel CVE team has assigned CVE-2026-89488 to this issue.
openEuler评分:(评分和向量)
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:正常修复
10.openEuler-24.03-LTS-SP4:正常修复
@wkfxxx 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:openvswitch: Fix CT limit teardown use-after-freePacket processing uses CT limit state under RCU, while netns teardownfrees that state under ovs_mutex. The CT limit pointer was neither removedfrom readers nor protected by a grace period, allowing packet processing todereference the freed state.An unprivileged user can trigger this bug from a user and networknamespace, causing a slab-use-after-free in ovs_ct_execute() when thenetns is torn down.Publish the CT limit pointer through RCU, remove it before teardown, andwait for readers before freeing its contents. Keep ovs_mutex aroundindividual CT limit updates, and use the RCU read-side lock while GETtraverses the RCU-protected limit lists.Netns teardown detaches the RCU-protected CT limit state in the pernet.pre_exit callback while holding ovs_mutex. The pernet core guarantees anRCU grace period between the .pre_exit and .exit callbacks, so the .exitcallback completes the teardown without adding any extra synchronization.The netlink command handlers do not need NULL checks because the userspacenetlink socket holds an active reference to its network namespace while arequest is processed. The per-netns exit path therefore cannot runconcurrently with SET, DEL, or GET for that socket's namespace.The Linux kernel CVE team has assigned CVE-2026-89488 to this issue. |
| 已分析 | 2.openEulerScore | 7.8 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不修复-超出修复范围,openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:正常修复,openEuler-24.03-LTS-SP3:正常修复,openEuler-24.03-LTS-SP4:正常修复,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
经过cve-manager解析，部分分支PR未合入，如红色字体所示：
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:暂不修复-漏洞仍在分析中
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复(PR未合入)
6.openEuler-24.03-LTS-SP3:正常修复(PR未合入)
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:不修复-超出修复范围
9.openEuler-24.03-LTS:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围
/create_pr
branch: OLK-5.10
name: Gu Bowen
email: gubowen5@huawei.com
CVE: CVE-2026-89488 · Workflow: 594ddbc8ec1a4f4b93aa041791350204 · Attempt: 1
状态：已结束
| 分支 | 状态 | PR / 错误 | 结果说明 | 适配评估 | 独立复核 |
|---|---|---|---|---|---|
| OLK-5.10 | failed | 前置评估失败：最终报告格式或引用证据无效。Run：17a202641f2147379d2a4a931bbe3222 | 未完成 | 未完成 |
显式重试：/retry 594ddbc8ec1a4f4b93aa041791350204（将重跑全部分支，重新验证来源并生成新的 Attempt）。
CVE-2026-89488
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: Fix CT limit teardown use-after-free
Packet processing uses CT limit state under RCU, while netns teardown
frees that state under ovs_mutex. The CT limit pointer was neither removed
from readers nor protected by a grace period, allowing packet processing to
dereference the freed state.
An unprivileged user can trigger this bug from a user and network
namespace, causing a slab-use-after-free in ovs_ct_execute() when the
netns is torn down.
Publish the CT limit pointer through RCU, remove it before teardown, and
wait for readers before freeing its contents. Keep ovs_mutex around
individual CT limit updates, and use the RCU read-side lock while GET
traverses the RCU-protected limit lists.
Netns teardown detaches the RCU-protected CT limit state in the pernet
.pre_exit callback while holding ovs_mutex. The pernet core guarantees an
RCU grace period between the .pre_exit and .exit callbacks, so the .exit
callback completes the teardown without adding any extra synchronization.
The netlink command handlers do not need NULL checks because the userspace
netlink socket holds an active reference to its network namespace while a
request is processed. The per-netns exit path therefore cannot run
concurrently with SET, DEL, or GET for that socket's namespace.
The Linux kernel CVE team has assigned CVE-2026-89488 to this issue.
openEuler评分:(评分和向量)
7.8
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否)：
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:正常修复
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:正常修复
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:正常修复
10.openEuler-24.03-LTS-SP4:正常修复
@wkfxxx 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:openvswitch: Fix CT limit teardown use-after-freePacket processing uses CT limit state under RCU, while netns teardownfrees that state under ovs_mutex. The CT limit pointer was neither removedfrom readers nor protected by a grace period, allowing packet processing todereference the freed state.An unprivileged user can trigger this bug from a user and networknamespace, causing a slab-use-after-free in ovs_ct_execute() when thenetns is torn down.Publish the CT limit pointer through RCU, remove it before teardown, andwait for readers before freeing its contents. Keep ovs_mutex aroundindividual CT limit updates, and use the RCU read-side lock while GETtraverses the RCU-protected limit lists.Netns teardown detaches the RCU-protected CT limit state in the pernet.pre_exit callback while holding ovs_mutex. The pernet core guarantees anRCU grace period between the .pre_exit and .exit callbacks, so the .exitcallback completes the teardown without adding any extra synchronization.The netlink command handlers do not need NULL checks because the userspacenetlink socket holds an active reference to its network namespace while arequest is processed. The per-netns exit path therefore cannot runconcurrently with SET, DEL, or GET for that socket's namespace.The Linux kernel CVE team has assigned CVE-2026-89488 to this issue. |
| 已分析 | 2.openEulerScore | 7.8 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不修复-超出修复范围,openEuler-22.03-LTS-SP4:正常修复,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:正常修复,openEuler-24.03-LTS-SP3:正常修复,openEuler-24.03-LTS-SP4:正常修复,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.
经过cve-manager解析，部分分支PR未合入，如红色字体所示：
原因说明：
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不修复-超出修复范围
3.openEuler-22.03-LTS-SP4:正常修复(PR未合入)
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复(PR未合入)
6.openEuler-24.03-LTS-SP3:正常修复(PR未合入)
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:不修复-超出修复范围
9.openEuler-24.03-LTS:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围
一、漏洞信息
漏洞编号：CVE-2026-89488
漏洞归属组件：kernel
漏洞归属的版本：5.10.0
CVSS评分：
BaseScore：7.8 High
Vector：CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
漏洞简述：
In the Linux kernel, the following vulnerability has been resolved:openvswitch: Fix CT limit teardown use-after-freePacket processing uses CT limit state under RCU, while netns teardownfrees that state under ovs_mutex. The CT limit pointer was neither removedfrom readers nor protected by a grace period, allowing packet processing todereference the freed state.An unprivileged user can trigger this bug from a user and networknamespace, causing a slab-use-after-free in ovs_ct_execute() when thenetns is torn down.Publish the CT limit pointer through RCU, remove it before teardown, andwait for readers before freeing its contents. Keep ovs_mutex aroundindividual CT limit updates, and use the RCU read-side lock while GETtraverses the RCU-protected limit lists.Netns teardown detaches the RCU-protected CT limit state in the pernet.pre_exit callback while holding ovs_mutex. The pernet core guarantees anRCU grace period between the .pre_exit and .exit callbacks, so the .exitcallback completes the teardown without adding any extra synchronization.The netlink command handlers do not need NULL checks because the userspacenetlink socket holds an active reference to its network namespace while arequest is processed. The per-netns exit path therefore cannot runconcurrently with SET, DEL, or GET for that socket s namespace.
漏洞公开时间：2026-09-12 04:19:30
漏洞创建时间：2026-09-14 23:05:33
漏洞详情参考链接：
https://nvd.nist.gov/vuln/detail/CVE-2026-89488
更多参考(点击展开)
无
漏洞分析指导链接：
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
其他
漏洞补丁信息：
详情(点击展开)
无
二、漏洞分析结构反馈
影响性分析说明：
In the Linux kernel, the following vulnerability has been resolved:openvswitch: Fix CT limit teardown use-after-freePacket processing uses CT limit state under RCU, while netns teardownfrees that state under ovs_mutex. The CT limit pointer was neither removedfrom readers nor protected by a grace period, allowing packet processing todereference the freed state.An unprivileged user can trigger this bug from a user and networknamespace, causing a slab-use-after-free in ovs_ct_execute() when thenetns is torn down.Publish the CT limit pointer through RCU, remove it before teardown, andwait for readers before freeing its contents. Keep ovs_mutex aroundindividual CT limit updates, and use the RCU read-side lock while GETtraverses the RCU-protected limit lists.Netns teardown detaches the RCU-protected CT limit state in the pernet.pre_exit callback while holding ovs_mutex. The pernet core guarantees anRCU grace period between the .pre_exit and .exit callbacks, so the .exitcallback completes the teardown without adding any extra synchronization.The netlink command handlers do not need NULL checks because the userspacenetlink socket holds an active reference to its network namespace while arequest is processed. The per-netns exit path therefore cannot runconcurrently with SET, DEL, or GET for that socket's namespace.The Linux kernel CVE team has assigned CVE-2026-89488 to this issue.
openEuler评分：
7.8
Vector：CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H
受影响版本排查(受影响/不受影响)：
1.master(6.18.40):不受影响
2.openEuler-20.03-LTS-SP4(4.19.90):受影响
3.openEuler-22.03-LTS-SP4(5.10.0):受影响
4.openEuler-24.03-LTS-Next(6.6.0):不受影响
5.openEuler-24.03-LTS-SP1(6.6.0):受影响
6.openEuler-24.03-LTS-SP3(6.6.0):受影响
7.openEuler-24.03-LTS-SP4(6.6.0):受影响
8.openEuler-22.03-LTS-SP3(5.10.0):受影响
9.openEuler-24.03-LTS(6.6.0):受影响
10.openEuler-24.03-LTS-SP2(6.6.0):受影响
修复是否涉及abi变化(是/否)：
1.master(6.18.40):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP4(5.10.0):否
4.openEuler-24.03-LTS-Next(6.6.0):否
5.openEuler-24.03-LTS-SP1(6.6.0):否
6.openEuler-24.03-LTS-SP3(6.6.0):否
7.openEuler-24.03-LTS-SP4(6.6.0):否
8.openEuler-22.03-LTS-SP3(5.10.0):否
9.openEuler-24.03-LTS(6.6.0):否
10.openEuler-24.03-LTS-SP2(6.6.0):否
原因说明：
1.master(6.18.40):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4(4.19.90):不修复-超出修复范围
3.openEuler-22.03-LTS-SP4(5.10.0):正常修复
4.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1(6.6.0):正常修复
6.openEuler-24.03-LTS-SP3(6.6.0):正常修复
7.openEuler-24.03-LTS-SP4(6.6.0):正常修复
8.openEuler-22.03-LTS-SP3(5.10.0):不修复-超出修复范围
9.openEuler-24.03-LTS(6.6.0):不修复-超出修复范围
10.openEuler-24.03-LTS-SP2(6.6.0):不修复-超出修复范围