Welcome To openEuler Community
Hey @fffsqian , thanks for your contribution to the community.
Bot Usage Manual
I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands. You can self-configure the PR merge rules for this repository. For more details, please refer to Here.
Contact Guide
If you have any questions, please contact the SIG: Kernel ,
and any of the maintainers: @hanjunguo, @oekernel, @sanglipeng, @wkfxxx, @zeng_zhaorong ,
and any of the committers: @CTC-XiboWang, @Frank_Sae, @GoGo_phytium, @GongLei-, @LiuYongQiang0816, @SuperSix173, @Tankll2021, @TrueAI, @YiweiZ, @allen-shi, @alvin-ling, @baratta, @bibo_mao, @caixu-blue, @chen-jun-hw, @chenjiesong, @chenjunxin1992, @chenke2026, @chenxiaosonggitcode, @chiqijun, @chizl, @chriszjh, @duanqiangwen, @eingesch, @fangfeng123, @fanghaiqinghw, @gang_he, @gaojuxin09, @gouhao2022, @guohaocs2c, @guzitao, @hanjunguo, @hanliyang, @hellotcc, @henryze, @hewanhan, @hjx_gitff, @hongwu-wang, @howard_lu, @htforge, @hu-chunzhi, @hunan4222, @hygmm, @jackknight, @jerry_lilijun, @jiayi0118, @junlong-zheng, @juntianlinux, @kailiu42, @kaitiandu, @kazero00, @kevinzhu1, @kile2009, @klmengkd, @koishimind, @kongzizaixian, @kunlun_spurs, @kylin-mayukun, @leap-io, @leap-zjke, @leoliu-oc, @li-huisong, @linan888, @linyuexie1, @linyunsheng, @liulongfang, @liyihang0226, @lostway1, @lujialin2, @mao-hongbo, @markyuan4ta21, @mawupeng, @mingqian218472, @mingrui-liu, @mufengyan, @nebulamatrix_rdma, @peterpangogogo, @pigalsofine, @raoxu-deepin, @robinorg, @rock_hw, @sageDriver, @sanglipeng, @shu-shengming, @shuaijiakun, @sinat_17738335, @siyanteng, @sming56_admin, @stavewu, @stkid, @sun_nanyong, @wangboe2022, @wanghang73, @wenzhiwei11, @whoisxxx, @wkfxxx, @woqidaideshi, @wsoydl, @xingmz1, @xukuohai, @yeweihua999, @ygn-ndwd-official, @yonghu_4dc5, @young-sun, @yubo-liu1, @yuehaibing_planb, @yuzenghui1, @zhang-changzhong, @zhangguodong11, @zhangyi089, @zhujianwei001, @zichengqu, @zouyipeng, @zqiao216 .


issue处理注意事项:
1. 提交正常修复分支的修复PR时,必须关联当前issue,否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复;
注: 内容的关键词(影响性分析说明, openEuler评分, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否), 原因说明)不能省略,省略后cve-manager将无法正常解析填写内容.
影响性分析说明:
openEuler评分: (评分和向量)
受影响版本排查(受影响/不受影响):
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
修复是否涉及abi变化(是/否):
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明:
1.master(6.18.40):
2.openEuler-20.03-LTS-SP4(4.19.90):
3.openEuler-22.03-LTS-SP4(5.10.0):
4.openEuler-24.03-LTS-Next(6.6.0):
5.openEuler-24.03-LTS-SP1(6.6.0):
6.openEuler-24.03-LTS-SP3(6.6.0):
7.openEuler-24.03-LTS-SP4(6.6.0):
原因说明填写请参考下方表格(注意:版本是否受影响和版本的原因说明必须对应,例如master版本分支受影响,那原因说明只能是受影响对应的原因之一!):
分支状态 |
原因说明 | 使用场景 |
|---|---|---|
| 受影响 | 正常修复 | 受影响且需要修复(包含升级版本修复)的漏洞; 受影响且已经修复的漏洞(历史修复PR也需要关联issue); 若因特殊原因无法修复,应修改原因说明为【不修复-特殊原因】,并在安委会备案相关情况。 |
| 受影响 | 暂不修复-漏洞仍在分析中 | 已关注到相关漏洞,正在处理,未明确漏洞影响和修复方案。 |
| 受影响 | 暂不修复-暂无解决方案或补丁 | 当前没有可用的修复或补救措施。【影响性分析】中应包含有关为什么没有修复或补救措施的详细说明、上游相关PR等。 |
| 受影响 | 不修复-超出修复范围 | 没有漏洞的修复计划。当版本停维、软件包宣布生命周期终止或弃用使用。 |
| 受影响 | 不修复-特殊原因导致不再修复 | 如存在其他特殊情况不修复相关漏洞,或评估后无法升级修复,应在openEuler社区安全委员会例会进行说明备案。 【影响性分析】中应包含不发布修复的详细说明、特殊情况还应有安委会会议纪要。 |
| 受影响 | 应源码修复-openEuler社区发布软件包不受影响 | 源码存在漏洞,但openEuler发布的二进制包因编译/配置原因不受影响;仍需合入上游补丁以保持源码健康,但不触发已发布版本更新。 |
| 不受影响 | 不受影响-组件不存在 | 软件不受影响,因为易受攻击的组件不在产品中。 |
| 不受影响 | 不受影响-已有内置的内联控制或缓解措施 | 内置的内联控制或缓解措施可防止攻击者利用漏洞 |
| 不受影响 | 不受影响-漏洞代码不能被攻击者触发 | 易受攻击的组件存在,并且该组件包含易受攻击的代码。但是,易受攻击的代码的使用方式使得攻击者无法进行任何预期的攻击。 |
| 不受影响 | 不受影响-漏洞代码不在执行路径 | 易受影响的代码在执行过程中不可访问,包括产品的非预期状态。产品不使用也不执行的组件。 |
| 不受影响 | 不受影响-漏洞代码不存在 | 产品不受影响,因为漏洞背后的代码在产品中不存在。与component_not_present不同的是,有问题的组件存在,但由于某种原因(例如安全的编译器选项)使漏洞的特定代码不存在于组件中。 |
issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue


说明:补丁链接仅供初步排查参考,实际可用性请人工再次确认,补丁下载验证可使用CVE补丁工具。
若补丁不准确,烦请在此issue下评论 '/report-patch 参考网址 补丁链接1,补丁链接2' 反馈正确信息,便于我们不断优化工具,不胜感激。
如 /report-patch https://security-tracker.debian.org/tracker/CVE-2021-3997 https://github.com/systemd/systemd/commit/5b1cf7a9be37e20133c0208005274ce4a5b5c6a1


@fffsqian CVE信息从NVD同步成功, 稍后请重新加载页面.


CVE-2026-80916
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved: kcov: fix data corruption and race conditions on PREEMPT_RT syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area. On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second softirq will overwrite the same per-CPU area, permanently destroying the original task's KCOV state. Fix this data corruption by moving the temporary storage from the per-CPU area to the per-thread area. Since each softirq thread now owns its own task context, nested softirq preemption no longer causes data overwrites. Note that while the temporary storage is now on a per-thread basis, the per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that kcov_remote_start() and kcov_remote_stop() operate atomically without racing against asynchronous interrupts that manipulate the current task's KCOV state. It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init() has already called panic() before returning NULL, for there will be no OOM-killable userspace processes when __init function of built-in module runs. But this patch also fixes crashing the kernel when vmalloc_node() in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processes problems.
The Linux kernel CVE team has assigned CVE-2026-80916 to this issue.
openEuler评分:(评分和向量)
5.5
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP4:受影响
4.openEuler-24.03-LTS:受影响
5.openEuler-24.03-LTS-Next:不受影响
6.openEuler-24.03-LTS-SP1:受影响
7.openEuler-24.03-LTS-SP3:受影响
8.openEuler-24.03-LTS-SP4:受影响
9.openEuler-22.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP2:受影响
修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP4:否
4.openEuler-24.03-LTS:否
5.openEuler-24.03-LTS-Next:否
6.openEuler-24.03-LTS-SP1:否
7.openEuler-24.03-LTS-SP3:否
8.openEuler-24.03-LTS-SP4:否
9.openEuler-22.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP2:否
原因说明:
1.master(6.12.33):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:正常修复
4.openEuler-24.03-LTS:不修复-超出修复范围
5.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
6.openEuler-24.03-LTS-SP1:正常修复
7.openEuler-24.03-LTS-SP3:正常修复
8.openEuler-24.03-LTS-SP4:正常修复
9.openEuler-22.03-LTS-SP3:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围


@wkfxxx 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved: kcov: fix data corruption and race conditions on PREEMPT_RT syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area. On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second softirq will overwrite the same per-CPU area, permanently destroying the original task's KCOV state. Fix this data corruption by moving the temporary storage from the per-CPU area to the per-thread area. Since each softirq thread now owns its own task context, nested softirq preemption no longer causes data overwrites. Note that while the temporary storage is now on a per-thread basis, the per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that kcov_remote_start() and kcov_remote_stop() operate atomically without racing against asynchronous interrupts that manipulate the current task's KCOV state. It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init() has already called panic() before returning NULL, for there will be no OOM-killable userspace processes when __init function of built-in module runs. But this patch also fixes crashing the kernel when vmalloc_node() in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processes problems.The Linux kernel CVE team has assigned CVE-2026-80916 to this issue. |
| 已分析 | 2.openEulerScore | 5.5 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:不受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-SP2:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-SP2:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在,openEuler-22.03-LTS-SP4:正常修复,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:正常修复,openEuler-24.03-LTS-SP3:正常修复,openEuler-24.03-LTS-SP4:正常修复,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-SP2:不修复-超出修复范围 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.


经过cve-manager解析,部分分支PR未合入,如红色字体所示:
原因说明:
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP4:正常修复(PR未合入)
4.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
5.openEuler-24.03-LTS-SP1:正常修复(PR未合入)
6.openEuler-24.03-LTS-SP3:正常修复(PR未合入)
7.openEuler-24.03-LTS-SP4:正常修复(PR未合入)
8.openEuler-22.03-LTS-SP3:不修复-超出修复范围
9.openEuler-24.03-LTS:不修复-超出修复范围
10.openEuler-24.03-LTS-SP2:不修复-超出修复范围


source: @hulk-ci-bot
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:
kcov: fix data corruption and race conditions on PREEMPT_RT
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the
temporary storage used for saving/restoring remote KCOV state is currently
allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads
(e.g., ksoftirqd). If a softirq context preempts a task running a remote
KCOV session, it safely saves the task's state into the per-CPU area.
However, if that softirq thread is subsequently preempted by a higher-
priority softirq thread on the same CPU, the second softirq will overwrite
the same per-CPU area, permanently destroying the original task's KCOV
state.
Fix this data corruption by moving the temporary storage from the per-CPU
area to the per-thread area. Since each softirq thread now owns its own
task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the
per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that
kcov_remote_start() and kcov_remote_stop() operate atomically without
racing against asynchronous interrupts that manipulate the current task's
KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()
has already called panic() before returning NULL, for there will be no
OOM-killable userspace processes when __init function of built-in module
runs. But this patch also fixes crashing the kernel when vmalloc_node()
in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL
but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but
kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all
OOM-killable userspace processes
problems.
openEuler评分:
8.2
AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master:不受影响
2.openEuler-20.03-LTS-SP4:不受影响
3.openEuler-22.03-LTS-SP3:受影响
4.openEuler-22.03-LTS-SP4:受影响
5.openEuler-24.03-LTS:受影响
6.openEuler-24.03-LTS-Next:不受影响
7.openEuler-24.03-LTS-SP1:受影响
8.openEuler-24.03-LTS-SP2:受影响
9.openEuler-24.03-LTS-SP3:受影响
10.openEuler-24.03-LTS-SP4:受影响
修复是否涉及abi变化(是/否):
1.master:否
2.openEuler-20.03-LTS-SP4:否
3.openEuler-22.03-LTS-SP3:否
4.openEuler-22.03-LTS-SP4:否
5.openEuler-24.03-LTS:否
6.openEuler-24.03-LTS-Next:否
7.openEuler-24.03-LTS-SP1:否
8.openEuler-24.03-LTS-SP2:否
9.openEuler-24.03-LTS-SP3:否
10.openEuler-24.03-LTS-SP4:否
原因说明:
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:应源码修复-openEuler社区发布软件包不受影响
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:应源码修复-openEuler社区发布软件包不受影响
10.openEuler-24.03-LTS-SP4:应源码修复-openEuler社区发布软件包不受影响


@wkfxxx 经过 cve-manager 解析, 已分析的内容如下表所示:
| 状态 | 分析项目 | 内容 |
|---|---|---|
| 已分析 | 1.影响性分析说明 | In the Linux kernel, the following vulnerability has been resolved:kcov: fix data corruption and race conditions on PREEMPT_RTsyzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for thetemporary storage used for saving/restoring remote KCOV state is currentlyallocated as the per-CPU area.On PREEMPT_RT kernels, softirq handlers run as preemptible task threads(e.g., ksoftirqd). If a softirq context preempts a task running a remoteKCOV session, it safely saves the task's state into the per-CPU area.However, if that softirq thread is subsequently preempted by a higher-priority softirq thread on the same CPU, the second softirq will overwritethe same per-CPU area, permanently destroying the original task's KCOVstate.Fix this data corruption by moving the temporary storage from the per-CPUarea to the per-thread area. Since each softirq thread now owns its owntask context, nested softirq preemption no longer causes data overwrites.Note that while the temporary storage is now on a per-thread basis, theper-CPU kcov_percpu_data.lock must be retained, for we need to ensure thatkcov_remote_start() and kcov_remote_stop() operate atomically withoutracing against asynchronous interrupts that manipulate the current task'sKCOV state.It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()has already called panic() before returning NULL, for there will be noOOM-killable userspace processes when __init function of built-in moduleruns. But this patch also fixes crashing the kernel when vmalloc_node()in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULLbut kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processesproblems. |
| 已分析 | 2.openEulerScore | 8.2 |
| 已分析 | 3.openEulerVector | AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H |
| 已分析 | 4.受影响版本排查 | master:不受影响,openEuler-20.03-LTS-SP4:不受影响,openEuler-22.03-LTS-SP3:受影响,openEuler-22.03-LTS-SP4:受影响,openEuler-24.03-LTS:受影响,openEuler-24.03-LTS-Next:不受影响,openEuler-24.03-LTS-SP1:受影响,openEuler-24.03-LTS-SP2:受影响,openEuler-24.03-LTS-SP3:受影响,openEuler-24.03-LTS-SP4:受影响 |
| 已分析 | 5.是否涉及abi变化 | master:否,openEuler-20.03-LTS-SP4:否,openEuler-22.03-LTS-SP3:否,openEuler-22.03-LTS-SP4:否,openEuler-24.03-LTS:否,openEuler-24.03-LTS-Next:否,openEuler-24.03-LTS-SP1:否,openEuler-24.03-LTS-SP2:否,openEuler-24.03-LTS-SP3:否,openEuler-24.03-LTS-SP4:否 |
| 已分析 | 6.原因说明 | master:不受影响-漏洞代码不能被攻击者触发,openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在,openEuler-22.03-LTS-SP3:不修复-超出修复范围,openEuler-22.03-LTS-SP4:不修复-超出修复范围,openEuler-24.03-LTS:不修复-超出修复范围,openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发,openEuler-24.03-LTS-SP1:应源码修复-openEuler社区发布软件包不受影响,openEuler-24.03-LTS-SP2:不修复-超出修复范围,openEuler-24.03-LTS-SP3:应源码修复-openEuler社区发布软件包不受影响,openEuler-24.03-LTS-SP4:应源码修复-openEuler社区发布软件包不受影响 |
请确认分析内容的准确性, 确认无误后, 您可以进行后续步骤, 否则您可以继续分析.


经过cve-manager解析,部分分支PR未合入,如红色字体所示:
原因说明:
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:应源码修复-openEuler社区发布软件包不受影响(PR未合入)
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:应源码修复-openEuler社区发布软件包不受影响(PR未合入)
10.openEuler-24.03-LTS-SP4:应源码修复-openEuler社区发布软件包不受影响(PR未合入)


经过cve-manager解析,部分分支PR未合入,如红色字体所示:
原因说明:
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:应源码修复-openEuler社区发布软件包不受影响(PR未合入)
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:应源码修复-openEuler社区发布软件包不受影响(PR未合入)
10.openEuler-24.03-LTS-SP4:应源码修复-openEuler社区发布软件包不受影响(PR未合入)


经过cve-manager解析,部分分支PR未合入,如红色字体所示:
原因说明:
1.master:不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4:不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP3:不修复-超出修复范围
4.openEuler-22.03-LTS-SP4:不修复-超出修复范围
5.openEuler-24.03-LTS:不修复-超出修复范围
6.openEuler-24.03-LTS-Next:不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1:应源码修复-openEuler社区发布软件包不受影响(PR未合入)
8.openEuler-24.03-LTS-SP2:不修复-超出修复范围
9.openEuler-24.03-LTS-SP3:应源码修复-openEuler社区发布软件包不受影响(PR未合入)
10.openEuler-24.03-LTS-SP4:应源码修复-openEuler社区发布软件包不受影响(PR未合入)


一、漏洞信息
漏洞编号:CVE-2026-80916
漏洞归属组件:kernel
漏洞归属的版本:4.19.140,4.19.90,5.10.0,6.1.19,6.18.40,6.18.56,6.4.0,6.6.0
CVSS评分:
BaseScore:N/A None
Vector:
漏洞简述:
In the Linux kernel, the following vulnerability has been resolved:kcov: fix data corruption and race conditions on PREEMPT_RTsyzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for thetemporary storage used for saving/restoring remote KCOV state is currentlyallocated as the per-CPU area.On PREEMPT_RT kernels, softirq handlers run as preemptible task threads(e.g., ksoftirqd). If a softirq context preempts a task running a remoteKCOV session, it safely saves the task s state into the per-CPU area.However, if that softirq thread is subsequently preempted by a higher-priority softirq thread on the same CPU, the second softirq will overwritethe same per-CPU area, permanently destroying the original task s KCOVstate.Fix this data corruption by moving the temporary storage from the per-CPUarea to the per-thread area. Since each softirq thread now owns its owntask context, nested softirq preemption no longer causes data overwrites.Note that while the temporary storage is now on a per-thread basis, theper-CPU kcov_percpu_data.lock must be retained, for we need to ensure thatkcov_remote_start() and kcov_remote_stop() operate atomically withoutracing against asynchronous interrupts that manipulate the current task sKCOV state.It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()has already called panic() before returning NULL, for there will be noOOM-killable userspace processes when __init function of built-in moduleruns. But this patch also fixes crashing the kernel when vmalloc_node()in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULLbut kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processesproblems.
漏洞公开时间:2026-09-10 01:17:46
漏洞创建时间:2026-11-04 14:46:09
漏洞详情参考链接:
https://nvd.nist.gov/vuln/detail/CVE-2026-80916
更多参考(点击展开)
无
漏洞分析指导链接:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/manual.md
漏洞数据来源:
其他
漏洞补丁信息:
详情(点击展开)
无
二、漏洞分析结构反馈
影响性分析说明:
In the Linux kernel, the following vulnerability has been resolved:kcov: fix data corruption and race conditions on PREEMPT_RTsyzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for thetemporary storage used for saving/restoring remote KCOV state is currentlyallocated as the per-CPU area.On PREEMPT_RT kernels, softirq handlers run as preemptible task threads(e.g., ksoftirqd). If a softirq context preempts a task running a remoteKCOV session, it safely saves the task s state into the per-CPU area.However, if that softirq thread is subsequently preempted by a higher-priority softirq thread on the same CPU, the second softirq will overwritethe same per-CPU area, permanently destroying the original task s KCOVstate.Fix this data corruption by moving the temporary storage from the per-CPUarea to the per-thread area. Since each softirq thread now owns its owntask context, nested softirq preemption no longer causes data overwrites.Note that while the temporary storage is now on a per-thread basis, theper-CPU kcov_percpu_data.lock must be retained, for we need to ensure thatkcov_remote_start() and kcov_remote_stop() operate atomically withoutracing against asynchronous interrupts that manipulate the current task sKCOV state.It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init()has already called panic() before returning NULL, for there will be noOOM-killable userspace processes when __init function of built-in moduleruns. But this patch also fixes crashing the kernel when vmalloc_node()in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULLbut kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processesproblems.
openEuler评分:
8.2
Vector:CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:C/C:H/I:H/A:H
受影响版本排查(受影响/不受影响):
1.master(7.3.0):不受影响
2.openEuler-20.03-LTS-SP4(4.19.90):不受影响
3.openEuler-22.03-LTS-SP3(5.10.0):受影响
4.openEuler-22.03-LTS-SP4(5.10.0):受影响
5.openEuler-24.03-LTS(6.6.0):受影响
6.openEuler-24.03-LTS-Next(6.6.0):不受影响
7.openEuler-24.03-LTS-SP1(6.6.0):受影响
8.openEuler-24.03-LTS-SP2(6.6.0):受影响
9.openEuler-24.03-LTS-SP3(6.6.0):受影响
10.openEuler-24.03-LTS-SP4(6.6.0):受影响
修复是否涉及abi变化(是/否):
1.master(7.3.0):否
2.openEuler-20.03-LTS-SP4(4.19.90):否
3.openEuler-22.03-LTS-SP3(5.10.0):否
4.openEuler-22.03-LTS-SP4(5.10.0):否
5.openEuler-24.03-LTS(6.6.0):否
6.openEuler-24.03-LTS-Next(6.6.0):否
7.openEuler-24.03-LTS-SP1(6.6.0):否
8.openEuler-24.03-LTS-SP2(6.6.0):否
9.openEuler-24.03-LTS-SP3(6.6.0):否
10.openEuler-24.03-LTS-SP4(6.6.0):否
原因说明:
1.master(7.3.0):不受影响-漏洞代码不能被攻击者触发
2.openEuler-20.03-LTS-SP4(4.19.90):不受影响-漏洞代码不存在
3.openEuler-22.03-LTS-SP3(5.10.0):不修复-超出修复范围
4.openEuler-22.03-LTS-SP4(5.10.0):不修复-超出修复范围
5.openEuler-24.03-LTS(6.6.0):不修复-超出修复范围
6.openEuler-24.03-LTS-Next(6.6.0):不受影响-漏洞代码不能被攻击者触发
7.openEuler-24.03-LTS-SP1(6.6.0):应源码修复-openEuler社区发布软件包不受影响
8.openEuler-24.03-LTS-SP2(6.6.0):不修复-超出修复范围
9.openEuler-24.03-LTS-SP3(6.6.0):应源码修复-openEuler社区发布软件包不受影响
10.openEuler-24.03-LTS-SP4(6.6.0):应源码修复-openEuler社区发布软件包不受影响