chore(docker): 评测镜像默认升到 CANN 9.1.0, 并让报告的 docker 字段属实-cann-bench-AtomGit

已合并

chore(docker): 评测镜像默认升到 CANN 9.1.0, 并让报告的 docker 字段属实 #270

Xinxian Chen创建于 8月17日从vINyLogY/cann-bench： chore/cann-9.1.0 合入到 cann/cann-bench： master

chore(docker): 评测镜像默认升到 CANN 9.1.0, 并让报告的 docker 字段属实 #270

已合并

Xinxian Chen创建于 8月17日

从vINyLogY/cann-bench chore/cann-9.1.0合入到cann/cann-bench master

共 22 个文件变更+357-147

Mdocker/base/Dockerfile+5-2

	@@ -3,7 +3,10 @@
3	# WHY toolkit-only (no ops/nnal): direct-launch (bisheng-compiled AscendC/CCE kernels launched	3	# WHY toolkit-only (no ops/nnal): direct-launch (bisheng-compiled AscendC/CCE kernels launched
4	# via `<<<>>>`) never calls aclnn, so ops (libopapi + kernel binaries) and nnal (ATB/SiP) are dead	4	# via `<<<>>>`) never calls aclnn, so ops (libopapi + kernel binaries) and nnal (ATB/SiP) are dead
5	# weight. Verified on 910b: torch_npu imports + npu memcpy works with libopapi absent.	5	# weight. Verified on 910b: torch_npu imports + npu memcpy works with libopapi absent.
6	-# Pairing (Ascend/pytorch compat table): torch_npu 2.10.0.post2 <-> torch 2.10 <-> CANN 9.0.x, py3.13 cp313.	6	+# Pairing (Ascend/pytorch COMPATIBILITY.md): torch_npu 2.10.0.post4 <-> torch 2.10.0 <-> CANN 9.1.0, py3.13.
		7	+# The torch_npu 2.10 line pairs ONLY with 9.1.0 -- that table has no 9.0.1 row at all, and the
		8	+# 2.10.0.post2 this image used to pin appears under no CANN version. Move the two together or you
		9	+# land off-table again.
7		10
8	# ----------------------------------------------------------------------------------------------------------	11	# ----------------------------------------------------------------------------------------------------------
9	# Mirror / version knobs -- every one DEFAULTS to the official/global source; pass --build-arg to swap to an	12	# Mirror / version knobs -- every one DEFAULTS to the official/global source; pass --build-arg to swap to an
	@@ -26,7 +29,7 @@ ARG APT_MIRROR=
26	ARG UV_PYTHON_INSTALL_MIRROR=	29	ARG UV_PYTHON_INSTALL_MIRROR=
27	ARG PYPI_MIRROR=	30	ARG PYPI_MIRROR=
28	ARG TORCH_MIRROR=	31	ARG TORCH_MIRROR=
29	-ARG CANN_VERSION=9.0.1	32	+ARG CANN_VERSION=9.1.0
30	# CANN_VERSION alone is enough to move versions -- the toolkit .run and its <arch> variants follow one	33	# CANN_VERSION alone is enough to move versions -- the toolkit .run and its <arch> variants follow one
31	# naming scheme on ascend-repo, verified present for 9.1.0 in both architectures. CANN_TOOLKIT_URL is	34	# naming scheme on ascend-repo, verified present for 9.1.0 in both architectures. CANN_TOOLKIT_URL is
32	# the escape hatch for the releases that do not: some land on the ascend-cann-open bucket instead	35	# the escape hatch for the releases that do not: some land on the ascend-cann-open bucket instead

Mdocker/base/README.md+24-13

	@@ -26,7 +26,7 @@ AscendHub per-device 镜像)。
26		26
27	```bash	27	```bash
28	cd docker/base/	28	cd docker/base/
29	-docker build --build-arg ARCH=$(uname -m) -t cann-toolkit-base:9.0.1-py3.13 .	29	+docker build --build-arg ARCH=$(uname -m) -t cann-toolkit-base:9.1.0-py3.13 .
30	```	30	```
31		31
32	镜像架构由 `ARCH` build-arg 决定(`aarch64` / `x86_64`,默认 `aarch64`),**必须在目标架构的	32	镜像架构由 `ARCH` build-arg 决定(`aarch64` / `x86_64`,默认 `aarch64`),**必须在目标架构的
	@@ -48,38 +48,49 @@ python 依赖由
48	\| `UV_PYTHON_INSTALL_MIRROR` \| (空 = github releases) \| `https://mirror.nju.edu.cn/github-release/astral-sh/python-build-standalone` \|	48	\| `UV_PYTHON_INSTALL_MIRROR` \| (空 = github releases) \| `https://mirror.nju.edu.cn/github-release/astral-sh/python-build-standalone` \|
49	\| `PYPI_MIRROR` \| (空 = `files.pythonhosted.org`) \| `https://mirrors.huaweicloud.com/repository/pypi` \|	49	\| `PYPI_MIRROR` \| (空 = `files.pythonhosted.org`) \| `https://mirrors.huaweicloud.com/repository/pypi` \|
50	\| `TORCH_MIRROR` \| (空 = `download.pytorch.org`) \| `https://mirror.nju.edu.cn/pytorch/whl/cpu` \|	50	\| `TORCH_MIRROR` \| (空 = `download.pytorch.org`) \| `https://mirror.nju.edu.cn/pytorch/whl/cpu` \|
51	-\| `CANN_VERSION` \| `9.0.1` \| toolkit `.run` 版本(从 OBS 拉取);落到 `ENV CANN_VERSION` 供 `docker/eval` 继承 \|	51	+\| `CANN_VERSION` \| `9.1.0` \| toolkit `.run` 版本(从 OBS 拉取);落到 `ENV CANN_VERSION` 供 `docker/eval` 继承 \|
52	\| `CANN_TOOLKIT_URL` \| 空(由 `CANN_VERSION` + `ARCH` 推导) \| 只在该版本不按常规命名/不在常规 bucket 时设,见下 \|	52	\| `CANN_TOOLKIT_URL` \| 空(由 `CANN_VERSION` + `ARCH` 推导) \| 只在该版本不按常规命名/不在常规 bucket 时设,见下 \|
53	\| `ARCH` \| `aarch64` \| `aarch64` / `x86_64`;决定 toolkit `.run`、`<arch>-linux/` 路径,并落到 `ENV CANN_ARCH` \|	53	\| `ARCH` \| `aarch64` \| `aarch64` / `x86_64`;决定 toolkit `.run`、`<arch>-linux/` 路径,并落到 `ENV CANN_ARCH` \|
54		54
55	### 换 CANN 版本	55	### 换 CANN 版本
56		56
57	正常只需 `--build-arg CANN_VERSION=<版本>` —— toolkit 和 ops 两个包在	57	正常只需 `--build-arg CANN_VERSION=<版本>` —— toolkit 和 ops 两个包在
58	-`ascend-repo.obs.cn-east-2` 上的命名跨版本一致(9.1.0 的 toolkit/ops × aarch64/x86_64 四个包	58	+`ascend-repo.obs.cn-east-2` 上的命名跨版本一致,`docker/eval` 会继承 `ENV CANN_VERSION`
59	-均已核实存在),`docker/eval` 会继承 `ENV CANN_VERSION` 去推导同版本的 ops:	59	+去推导同版本的 ops:
60		60
61	```bash	61	```bash
62	# base	62	# base
63	-docker build --build-arg CANN_VERSION=9.1.0 --build-arg ARCH=$(uname -m) \	63	+docker build --build-arg CANN_VERSION=<版本> --build-arg ARCH=$(uname -m) \
64	- -t cann-toolkit-base:9.1.0-py3.13 .	64	+ -t cann-toolkit-base:<版本>-py3.13 .
65	# eval (build.sh 用 CANN_VERSION 只是为了拼 BASE_IMAGE 的 tag)	65	# eval (build.sh 用 CANN_VERSION 只是为了拼 BASE_IMAGE 的 tag)
66	-CANN_VERSION=9.1.0 NPU_ARCH=ascend950 bash ../eval/build.sh	66	+CANN_VERSION=<版本> NPU_ARCH=ascend950 bash ../eval/build.sh
67	```	67	```
68		68
		69	+**换版本时 `torch_npu` 要按[官方配套表](https://gitcode.com/Ascend/pytorch/blob/master/COMPATIBILITY.md)
		70	+重新选**:把 `docker/base/pyproject.toml` 与 `docker/eval/pyproject.toml` 的 `torch-npu` 改成
		71	+新 CANN 版本在表里对应的串号,再重新 `uv lock`。表里没有对应行的 CANN 版本不要用 —— 那样钉出来
		72	+的组合官方没有验证过,理由见下一节。
		73	+
69	`CANN_TOOLKIT_URL` 是给例外准备的:部分版本发在 `ascend-cann-open.obs.cn-north-4` 上,	74	`CANN_TOOLKIT_URL` 是给例外准备的:部分版本发在 `ascend-cann-open.obs.cn-north-4` 上,
70	或以合并包 `Ascend-cann_<版本>_linux-<arch>.run` 的形式发布(而非 `Ascend-cann-toolkit_...`)。	75	或以合并包 `Ascend-cann_<版本>_linux-<arch>.run` 的形式发布(而非 `Ascend-cann-toolkit_...`)。
71		76
72	-9.1.0 实测过(q7 / 910B2 / aarch64):只加 `--build-arg CANN_VERSION=9.1.0`,base + eval	77	+### 为什么是 9.1.0 + torch_npu 2.10.0.post4
73	-(`OPS_MODE=refonly`,顺带验了 9.1.0 的 ops 包)全部建成,`--self-test` 全绿、内置算子仍被挡住,	78	+
74	-一次真实三阶段评测 4/4 通过、得分 74.10(9.0.1 同一提交同一算子是 73.00)。安装布局也没变	79	+[官方配套表](https://gitcode.com/Ascend/pytorch/blob/master/COMPATIBILITY.md)里 torch_npu
75	-(`cann-9.1.0/` + `latest` 符号链接 + `ascend-toolkit/set_env.sh`),`torch_npu 2.10.0.post2`	80	+2.10 这条线只配 CANN 9.1.0(`2.10.0.post4` ↔ torch `2.10.0` ↔ CANN `9.1.0`),表里没有
76	-虽然官方对表写的是 CANN 9.0.x,在 9.1.0 上导入、认卡、H2D、编译提交都正常。	81	+9.0.1 这一行,`2.10.0.post2` 也不在表内。所以本镜像此前的 `9.0.1 + 2.10.0.post2` 是表外组合;
		82	+现在这一档是第一次落在表内。Python 3.13 在该行的支持范围内。
		83	+
		84	+9.1.0 的 toolkit/ops × aarch64/x86_64 四个包均已核实存在。实测(q7 / 910B2 / aarch64):
		85	+base + eval(`OPS_MODE=refonly`,顺带验了 9.1.0 的 ops 包)全部建成,`--self-test` 全绿、
		86	+内置算子仍被挡住,一次真实三阶段评测 4/4 通过、得分 74.10(9.0.1 同一提交同一算子是 73.00)。
		87	+安装布局也没变(`cann-9.1.0/` + `latest` 符号链接 + `ascend-toolkit/set_env.sh`)。
77		88
78	`PYPI_MIRROR`/`TORCH_MIRROR` 就地改写 `uv.lock` 里的 canonical wheel URL(同 hash,`--frozen` 仍校验),	89	`PYPI_MIRROR`/`TORCH_MIRROR` 就地改写 `uv.lock` 里的 canonical wheel URL(同 hash,`--frozen` 仍校验),
79	换源不破坏可复现性。CN 全量示例:	90	换源不破坏可复现性。CN 全量示例:
80		91
81	```bash	92	```bash
82	-docker build -t cann-toolkit-base:9.0.1-py3.13 \	93	+docker build -t cann-toolkit-base:9.1.0-py3.13 \
83	--build-arg BASE_OS=docker.m.daocloud.io/library/debian:12-slim \	94	--build-arg BASE_OS=docker.m.daocloud.io/library/debian:12-slim \
84	--build-arg APT_MIRROR=mirrors.huaweicloud.com \	95	--build-arg APT_MIRROR=mirrors.huaweicloud.com \
85	--build-arg UV_IMAGE=ghcr.m.daocloud.io/astral-sh/uv:0.11.29 \	96	--build-arg UV_IMAGE=ghcr.m.daocloud.io/astral-sh/uv:0.11.29 \

Mdocker/base/pyproject.toml+1-1

	@@ -11,7 +11,7 @@ version = "0"
11	requires-python = "==3.13.*"	11	requires-python = "==3.13.*"
12	dependencies = [	12	dependencies = [
13	"torch==2.10.0",	13	"torch==2.10.0",
14	- "torch-npu==2.10.0.post2",	14	+ "torch-npu==2.10.0.post4",
15	"numpy", "pyyaml", "decorator", "attrs", "scipy", "cloudpickle", "ml-dtypes", "psutil",	15	"numpy", "pyyaml", "decorator", "attrs", "scipy", "cloudpickle", "ml-dtypes", "psutil",
16	"filelock", "typing-extensions", "sympy", "networkx", "jinja2", "fsspec", "mpmath", "markupsafe",	16	"filelock", "typing-extensions", "sympy", "networkx", "jinja2", "fsspec", "mpmath", "markupsafe",
17	"pip", "setuptools", "wheel", "build",	17	"pip", "setuptools", "wheel", "build",

Mdocker/base/run.sh+1-1

	@@ -15,7 +15,7 @@
15	set -euo pipefail	15	set -euo pipefail
16	cd "$(dirname "$0")"	16	cd "$(dirname "$0")"
17		17
18	-IMAGE="${IMAGE:-cann-toolkit-base:9.0.1-py3.13}"	18	+IMAGE="${IMAGE:-cann-toolkit-base:9.1.0-py3.13}"
19	MODE="${1:-smoke}"	19	MODE="${1:-smoke}"
20		20
21	DRV=/usr/local/Ascend/driver/lib64/driver:/usr/local/Ascend/driver/lib64	21	DRV=/usr/local/Ascend/driver/lib64/driver:/usr/local/Ascend/driver/lib64

Mdocker/base/uv.lock+4-4

	@@ -80,7 +80,7 @@ requires-dist = [
80	{ name = "setuptools" },	80	{ name = "setuptools" },
81	{ name = "sympy" },	81	{ name = "sympy" },
82	{ name = "torch", specifier = "==2.10.0", index = "https://download.pytorch.org/whl/cpu" },	82	{ name = "torch", specifier = "==2.10.0", index = "https://download.pytorch.org/whl/cpu" },
83	- { name = "torch-npu", specifier = "==2.10.0.post2" },	83	+ { name = "torch-npu", specifier = "==2.10.0.post4" },
84	{ name = "typing-extensions" },	84	{ name = "typing-extensions" },
85	{ name = "wheel" },	85	{ name = "wheel" },
86	]	86	]
	@@ -314,14 +314,14 @@ wheels = [
314		314
315	[[package]]	315	[[package]]
316	name = "torch-npu"	316	name = "torch-npu"
317	-version = "2.10.0.post2"	317	+version = "2.10.0.post4"
318	source = { registry = "https://pypi.org/simple" }	318	source = { registry = "https://pypi.org/simple" }
319	dependencies = [	319	dependencies = [
320	{ name = "torch" },	320	{ name = "torch" },
321	]	321	]
322	wheels = [	322	wheels = [
323	- { url = "https://files.pythonhosted.org/packages/9c/67/438d901072bb339c8c732e3635c49dcc8489d695aa59c78945001b057aa2/torch_npu-2.10.0.post2-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:157c2c7b59497dd70846b5e8038e142bcea6fd13a9072159732e3b8004593d48", size = 32522503, upload-time = "2026-07-02T02:24:00.506Z" },	323	+ { url = "https://files.pythonhosted.org/packages/aa/8a/525206571e3a0f9a36363ae55a424b34bac790c8ce10129051e7e8336be6/torch_npu-2.10.0.post4-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:2d88ce46c69cfa562453925865805ca8c358cea31176ff9b284e7851eda213d0", size = 36258846, upload-time = "2026-07-27T07:30:49.174Z" },
324	- { url = "https://files.pythonhosted.org/packages/92/ff/80eb5e6b8788dd8e5d0c9c75b780a176f1a32e49e4ba90889584877c3446/torch_npu-2.10.0.post2-cp313-cp313-manylinux_2_28_x86_64.whl", hash = "sha256:8f6eac66b9db2d956b5136f5e072d5fb7c0524bcaa90d6a3ac71a044705d475b", size = 35881624, upload-time = "2026-07-02T02:24:17.603Z" },	324	+ { url = "https://files.pythonhosted.org/packages/48/a5/c7c2fc0139c55393d9ff3116b0c6ec62bf5ea6257f1a64515927e31dcd27/torch_npu-2.10.0.post4-cp313-cp313-manylinux_2_28_x86_64.whl", hash = "sha256:e6ac70748c9d03312afb1fc5cf84b69d1b955a59555116e286cf7a10a302be9e", size = 39987520, upload-time = "2026-07-27T07:31:25.567Z" },
325	]	325	]
326		326
327	[[package]]	327	[[package]]

Mdocker/dev/Dockerfile+29-10

	@@ -3,21 +3,34 @@
3	# 多平台支持：通过 --build-arg 切换 CANN 版本和硬件型号。	3	# 多平台支持：通过 --build-arg 切换 CANN 版本和硬件型号。
4	#	4	#
5	# 示例：	5	# 示例：
6	-# docker build --network=host -t cann-bench:cann9.0.0-910b-latest \	6	+# docker build --network=host -t cann-bench:cann9.1.0-910b-latest \
7	-# --build-arg CANN_VERSION=9.0.0 --build-arg DEVICE=910b .	7	+# --build-arg CANN_VERSION=9.1.0 --build-arg DEVICE=910b .
8	#	8	#
9	-# docker build --network=host -t cann-bench:cann9.0.0-950-latest \	9	+# docker build --network=host -t cann-bench:cann9.1.0-950-latest \
10	-# --build-arg CANN_VERSION=9.0.0 --build-arg DEVICE=950 .	10	+# --build-arg CANN_VERSION=9.1.0 --build-arg DEVICE=950 .
11	#	11	#
12	-# 可用 DEVICE 值：910b / 910c / 950 等（对应 AscendHub 镜像 tag 中的硬件段）	12	+# 完整镜像 tag 格式：cann:<CANN_VERSION>-<DEVICE>-ubuntu22.04-py3.12-<VARIANT>
13	-# 完整镜像 tag 格式：cann:<CANN_VERSION>-<DEVICE>-ubuntu22.04-py3.12	13	+# 2026-08-17 在 AscendHub 上核实过的取值：
		14	+# CANN_VERSION 9.0.1 / 9.1.0（9.0.0 的 tag 已下架 —— 本文件此前的默认值就指向它，
		15	+# 也就是说这个镜像已经建不出来了；9.2.0 尚未发布）
		16	+# DEVICE 910 / 910b / 950 / a3 / 310p（910c 不存在，旧注释里写错了）
		17	+# VARIANT devel（含编译工具链，评测要编提交，选它）/ runtime 系列
		18	+# 9.1.0-910b 与 9.1.0-950 的 -devel 均为 arm64 + amd64 双架构。
		19	+#
		20	+# 版本配套:CANN 9.1.0 这一行是 torch 2.10.0 <-> torch_npu 2.10.0.post4(另有 2.11 / 2.12
		21	+# 两条线),见 https://gitcode.com/Ascend/pytorch/blob/master/COMPATIBILITY.md
		22	+# torch/torch_npu 由下面显式安装并钉版本,不依赖基础镜像自带的串号;换 CANN_VERSION 时
		23	+# 必须按配套表同步改 TORCH_VERSION / TORCH_NPU_VERSION,否则 ABI 不配套。
		24	+# 两者落到 ENV,由 test_env.py 回读实际装到的版本校验,文本改错会在 smoke 阶段红。
14		25
15	-ARG CANN_VERSION=9.0.0	26	+ARG CANN_VERSION=9.1.0
16	ARG DEVICE=910b	27	ARG DEVICE=910b
		28	+# devel 才带编译工具链；AscendHub 从某个版本起把它拆成了单独的 tag 后缀。
		29	+ARG VARIANT=devel
17	ARG TRITON_ASCEND_VERSION=	30	ARG TRITON_ASCEND_VERSION=
18	ARG TRITON_ASCEND_INDEX_URL=https://triton-ascend.osinfra.cn/pypi/simple	31	ARG TRITON_ASCEND_INDEX_URL=https://triton-ascend.osinfra.cn/pypi/simple
19		32
20	-FROM swr.cn-south-1.myhuaweicloud.com/ascendhub/cann:${CANN_VERSION}-${DEVICE}-ubuntu22.04-py3.12	33	+FROM swr.cn-south-1.myhuaweicloud.com/ascendhub/cann:${CANN_VERSION}-${DEVICE}-ubuntu22.04-py3.12-${VARIANT}
21		34
22	ARG TRITON_ASCEND_VERSION	35	ARG TRITON_ASCEND_VERSION
23	ARG TRITON_ASCEND_INDEX_URL	36	ARG TRITON_ASCEND_INDEX_URL
	@@ -45,6 +58,12 @@ RUN curl -LSf https://astral.sh/uv/install.sh \| sh && \
45	ARG PYPI_INDEX_URL=	58	ARG PYPI_INDEX_URL=
46	ENV UV_INDEX_URL=${PYPI_INDEX_URL}	59	ENV UV_INDEX_URL=${PYPI_INDEX_URL}
47		60
		61	+# 与 CANN_VERSION 配套的 torch 栈,见文件头的配套表链接。
		62	+ARG TORCH_VERSION=2.10.0
		63	+ARG TORCH_NPU_VERSION=2.10.0.post4
		64	+ENV CANN_BENCH_TORCH_VERSION=${TORCH_VERSION}
		65	+ENV CANN_BENCH_TORCH_NPU_VERSION=${TORCH_NPU_VERSION}
		66	+
48	# torch_npu install needs these at build time to locate driver libs.	67	# torch_npu install needs these at build time to locate driver libs.
49	ENV ASCEND_HOME_PATH=/usr/local/Ascend/ascend-toolkit/latest	68	ENV ASCEND_HOME_PATH=/usr/local/Ascend/ascend-toolkit/latest
50	ENV LD_LIBRARY_PATH=/usr/local/Ascend/driver/lib64/common/:/usr/local/Ascend/driver/lib64/driver/:${ASCEND_HOME_PATH}/aarch64-linux/lib64	69	ENV LD_LIBRARY_PATH=/usr/local/Ascend/driver/lib64/common/:/usr/local/Ascend/driver/lib64/driver/:${ASCEND_HOME_PATH}/aarch64-linux/lib64
	@@ -55,8 +74,8 @@ RUN uv pip install --system --index-url ${PYPI_INDEX_URL:-https://mirrors.huawei
55	numpy pyyaml decorator scipy attrs cloudpickle \	74	numpy pyyaml decorator scipy attrs cloudpickle \
56	ml-dtypes psutil tornado pandas expecttest protobuf \	75	ml-dtypes psutil tornado pandas expecttest protobuf \
57	pytest pytest-timeout 'ruamel.yaml>=0.18' build setuptools wheel	76	pytest pytest-timeout 'ruamel.yaml>=0.18' build setuptools wheel
58	-RUN uv pip install --system --no-deps --index-url https://download.pytorch.org/whl/cpu torch==2.10.0	77	+RUN uv pip install --system --no-deps --index-url https://download.pytorch.org/whl/cpu torch==${TORCH_VERSION}
59	-RUN uv pip install --system --no-deps --index-url ${PYPI_INDEX_URL:-https://mirrors.huaweicloud.com/repository/pypi/simple/} torch_npu==2.10.0	78	+RUN uv pip install --system --no-deps --index-url ${PYPI_INDEX_URL:-https://mirrors.huaweicloud.com/repository/pypi/simple/} torch_npu==${TORCH_NPU_VERSION}
60		79
61	# Triton-Ascend is optional because its compiler runtime is large. The wheel	80	# Triton-Ascend is optional because its compiler runtime is large. The wheel
62	# owns the top-level `triton` package, so install it and its pinned dependencies	81	# owns the top-level `triton` package, so install it and its pinned dependencies

Mdocker/dev/README.md+27-13

	@@ -4,16 +4,30 @@
4	> 本镜像基于 AscendHub 完整 CANN(含 ops/nnal),定位是需要内置算子的交互调试、	4	> 本镜像基于 AscendHub 完整 CANN(含 ops/nnal),定位是需要内置算子的交互调试、
5	> Triton-Ascend smoke,以及历史 CI。它不自带 harness,仍需挂一棵 cann-bench 工作树进来。	5	> Triton-Ascend smoke,以及历史 CI。它不自带 harness,仍需挂一棵 cann-bench 工作树进来。
6		6
7	-CANN-BENCH 参考执行镜像。torch 2.10.0 + torch\_npu 2.10.0 + 相关科学计算栈。	7	+CANN-BENCH 参考执行镜像。torch 2.10.0 + torch\_npu 2.10.0.post4 + 相关科学计算栈。
8	通过 `--build-arg` 参数化 CANN 版本和硬件型号，同一 Dockerfile 适配不同设备。	8	通过 `--build-arg` 参数化 CANN 版本和硬件型号，同一 Dockerfile 适配不同设备。
9		9
10	\| 参数 \| 默认值 \| 说明 \|	10	\| 参数 \| 默认值 \| 说明 \|
11	\|------\|--------\|------\|	11	\|------\|--------\|------\|
12	-\| `CANN_VERSION` \| `9.0.0` \| CANN toolkit 版本 \|	12	+\| `CANN_VERSION` \| `9.1.0` \| CANN toolkit 版本 \|
13	-\| `DEVICE` \| `910b` \| 硬件型号（910b / 910c / 950 等，对应 AscendHub 镜像 tag） \|	13	+\| `DEVICE` \| `910b` \| 硬件型号（910 / 910b / 950 / a3 / 310p，对应 AscendHub 镜像 tag 的硬件段） \|
14	\| `TRITON_ASCEND_VERSION` \| 空 \| 可选 Triton-Ascend 版本；当前验证版本为 `3.2.1` \|	14	\| `TRITON_ASCEND_VERSION` \| 空 \| 可选 Triton-Ascend 版本；当前验证版本为 `3.2.1` \|
		15	+\| `VARIANT` \| `devel` \| AscendHub tag 的末段；`devel` 才带编译工具链，评测要编提交 \|
		16	+\| `TORCH_VERSION` \| `2.10.0` \| 与 `CANN_VERSION` 配套,见下 \|
		17	+\| `TORCH_NPU_VERSION` \| `2.10.0.post4` \| 同上 \|
15		18
16	-默认 tag `cann-bench:cann9.0.0-910b-latest`。	19	+torch 栈不取基础镜像自带的串号,由 Dockerfile 显式安装并钉死。改 `CANN_VERSION` 时这两个
		20	+要一起按[官方配套表](https://gitcode.com/Ascend/pytorch/blob/master/COMPATIBILITY.md)改
		21	+(9.1.0 这一行是 torch `2.10.0` <-> torch_npu `2.10.0.post4`)。两个值会落到镜像的
		22	+`CANN_BENCH_TORCH_VERSION` / `CANN_BENCH_TORCH_NPU_VERSION`,`test_env.py` 的 [1] 会回读
		23	+实际装到的版本比对 —— 钉错或被上游覆盖,`run.sh smoke` 就红。
		24	+
		25	+默认 tag `cann-bench:cann9.1.0-910b-latest`,基础镜像是
		26	+`ascendhub/cann:9.1.0-910b-ubuntu22.04-py3.12-devel`(arm64 + amd64 双架构)。
		27	+
		28	+> 上游 tag 会下架:`9.0.0-910b-ubuntu22.04-py3.12`(本文件此前的默认)在 2026-08-17
		29	+> 核查时已不存在,即那个默认值已经建不出镜像。换版本前先 `docker manifest inspect`
		30	+> 确认 tag 还在。
17		31
18	- `Dockerfile` — 镜像定义（ARG 参数化）	32	- `Dockerfile` — 镜像定义（ARG 参数化）
19	- `entrypoint.sh` — 容器入口 (source CANN env, 转交 CMD)	33	- `entrypoint.sh` — 容器入口 (source CANN env, 转交 CMD)
	@@ -33,25 +47,25 @@ cd /path/to/repo/docker/dev/
33	### 910B（默认）	47	### 910B（默认）
34		48
35	```bash	49	```bash
36	-docker build --network=host -t cann-bench:cann9.0.0-910b-latest .	50	+docker build --network=host -t cann-bench:cann9.1.0-910b-latest .
37	```	51	```
38		52
39	### 950PR	53	### 950PR
40		54
41	```bash	55	```bash
42	docker build --network=host \	56	docker build --network=host \
43	- --build-arg CANN_VERSION=9.0.0 --build-arg DEVICE=950 \	57	+ --build-arg CANN_VERSION=9.1.0 --build-arg DEVICE=950 \
44	- -t cann-bench:cann9.0.0-950-latest .	58	+ -t cann-bench:cann9.1.0-950-latest .
45	```	59	```
46		60
47	### Triton-Ascend（910B / 950PR）	61	### Triton-Ascend（910B / 950PR）
48		62
49	```bash	63	```bash
50	docker build --network=host \	64	docker build --network=host \
51	- --build-arg CANN_VERSION=9.0.0 \	65	+ --build-arg CANN_VERSION=9.1.0 \
52	--build-arg DEVICE=950 \	66	--build-arg DEVICE=950 \
53	--build-arg TRITON_ASCEND_VERSION=3.2.1 \	67	--build-arg TRITON_ASCEND_VERSION=3.2.1 \
54	- -t cann-bench:cann9.0.0-950-triton3.2.1 .	68	+ -t cann-bench:cann9.1.0-950-triton3.2.1 .
55	```	69	```
56		70
57	设置该参数后，镜像 smoke 会实际 JIT 编译并运行 Triton vector add，而不只是检查 import。	71	设置该参数后，镜像 smoke 会实际 JIT 编译并运行 Triton vector add，而不只是检查 import。
	@@ -60,7 +74,7 @@ docker build --network=host \
60	```bash	74	```bash
61	docker build --network=host \	75	docker build --network=host \
62	--build-arg HTTP_PROXY --build-arg HTTPS_PROXY \	76	--build-arg HTTP_PROXY --build-arg HTTPS_PROXY \
63	- -t cann-bench:cann9.0.0-910b-latest .	77	+ -t cann-bench:cann9.1.0-910b-latest .
64	```	78	```
65		79
66	也可配置 pypi 镜像源: `--build-arg PYPI_INDEX_URL`。	80	也可配置 pypi 镜像源: `--build-arg PYPI_INDEX_URL`。
	@@ -72,9 +86,9 @@ docker build --network=host \
72	```bash	86	```bash
73	bash run.sh smoke	87	bash run.sh smoke
74	# 或指定 950PR 镜像:	88	# 或指定 950PR 镜像:
75	-IMAGE=cann-bench:cann9.0.0-950-latest bash run.sh smoke	89	+IMAGE=cann-bench:cann9.1.0-950-latest bash run.sh smoke
76	# Triton-Ascend image:	90	# Triton-Ascend image:
77	-IMAGE=cann-bench:cann9.0.0-950-triton3.2.1 bash run.sh smoke	91	+IMAGE=cann-bench:cann9.1.0-950-triton3.2.1 bash run.sh smoke
78	```	92	```
79		93
80	期望 `ALL CHECKS PASSED`。	94	期望 `ALL CHECKS PASSED`。
	@@ -103,6 +117,6 @@ Override: `CONTAINER=<name> WORKSPACE=<host-path> bash run.sh dev`。
103		117
104	\| 变量 \| 默认 \|	118	\| 变量 \| 默认 \|
105	\|-------------\|-----------------------------------\|	119	\|-------------\|-----------------------------------\|
106	-\| `IMAGE` \| `cann-bench:cann9.0.0-910b-latest` \|	120	+\| `IMAGE` \| `cann-bench:cann9.1.0-910b-latest` \|
107	\| `CONTAINER` \| `cann-bench` (仅 dev) \|	121	\| `CONTAINER` \| `cann-bench` (仅 dev) \|
108	\| `WORKSPACE` \| `$(pwd)/workspace` (仅 dev) \|	122	\| `WORKSPACE` \| `$(pwd)/workspace` (仅 dev) \|

Mdocker/dev/entrypoint.sh+1-1

	@@ -7,7 +7,7 @@ source /usr/local/Ascend/ascend-toolkit/set_env.sh 2>/dev/null \|\| true
7		7
8	if [[ $# -eq 0 ]]; then	8	if [[ $# -eq 0 ]]; then
9	cat <<EOF	9	cat <<EOF
10	-Usage: docker run --rm cann-bench:cann9.0.0-* <command> [args...]	10	+Usage: docker run --rm cann-bench:cann9.1.0-* <command> [args...]
11	python3 /test_env.py # post-build smoke	11	python3 /test_env.py # post-build smoke
12	bash # interactive shell	12	bash # interactive shell
13	EOF	13	EOF

Mdocker/dev/run.sh+2-2

	@@ -4,12 +4,12 @@
4	# bash run.sh shell # one-shot interactive shell with NPU bound in	4	# bash run.sh shell # one-shot interactive shell with NPU bound in
5	# bash run.sh dev # detached sleep infinity for docker exec debugging	5	# bash run.sh dev # detached sleep infinity for docker exec debugging
6	#	6	#
7	-# 指定镜像: IMAGE=cann-bench:cann9.0.0-950-latest bash run.sh smoke	7	+# 指定镜像: IMAGE=cann-bench:cann9.1.0-950-latest bash run.sh smoke
8		8
9	set -euo pipefail	9	set -euo pipefail
10	cd "$(dirname "$0")"	10	cd "$(dirname "$0")"
11		11
12	-IMAGE="${IMAGE:-cann-bench:cann9.0.0-910b-latest}"	12	+IMAGE="${IMAGE:-cann-bench:cann9.1.0-910b-latest}"
13	MODE="${1:-smoke}"	13	MODE="${1:-smoke}"
14		14
15	NPU_FLAGS=(	15	NPU_FLAGS=(

Mdocker/dev/test_env.py+18-3

	@@ -1,8 +1,9 @@
1	#!/usr/bin/env python3	1	#!/usr/bin/env python3
2	-"""Post-build smoke for cann-bench:cann9.0.0-* execution image.	2	+"""Post-build smoke for cann-bench:cann9.1.0-* execution image.
3		3
4	Verifies in order:	4	Verifies in order:
5	- [1] python / torch / torch_npu importable, log versions	5	+ [1] python / torch / torch_npu importable, and the installed torch stack
		6	+ matches the CANN-matched pins the image was built with
6	[2] torch_npu can see at least one NPU device	7	[2] torch_npu can see at least one NPU device
7	[3] npu-smi info works (driver/runtime loaded)	8	[3] npu-smi info works (driver/runtime loaded)
8	[4] CANN compiler version.info readable (proves CANN install intact)	9	[4] CANN compiler version.info readable (proves CANN install intact)
	@@ -17,12 +18,26 @@ import sys
17		18
18	failed = []	19	failed = []
19		20
20	-# [1] python/torch/torch_npu versions	21	+# [1] python/torch/torch_npu versions. The Dockerfile pins torch and torch_npu
		22	+# to the row the base CANN version occupies in the official compatibility table
		23	+# and echoes those pins into CANN_BENCH_TORCH*_VERSION. Comparing the installed
		24	+# distributions against them catches a build that silently resolved to a
		25	+# different build number — the ABI mismatch that table exists to prevent. The
		26	+# distribution version is what the pin acts on, so read it rather than
		27	+# __version__; its local label ("+cpu") is not part of the pairing.
21	try:	28	try:
		29	+ import importlib.metadata
		30	+
22	import torch	31	import torch
23	import torch_npu	32	import torch_npu
24		33
25	py = ".".join(str(v) for v in sys.version_info[:3])	34	py = ".".join(str(v) for v in sys.version_info[:3])
		35	+ for dist, want in (
		36	+ ("torch", os.environ.get("CANN_BENCH_TORCH_VERSION", "")),
		37	+ ("torch-npu", os.environ.get("CANN_BENCH_TORCH_NPU_VERSION", "")),
		38	+ ):
		39	+ installed = importlib.metadata.version(dist).split("+")[0]
		40	+ assert not want or installed == want, f"{dist} {installed}, image pins {want}"
26	print(f"[OK] [1] python {py}, torch {torch.__version__}, torch_npu {torch_npu.__version__}")	41	print(f"[OK] [1] python {py}, torch {torch.__version__}, torch_npu {torch_npu.__version__}")
27	except Exception as e:	42	except Exception as e:
28	print(f"[FAIL] [1] import/version: {e}")	43	print(f"[FAIL] [1] import/version: {e}")

Mdocker/eval/Dockerfile+8-1

	@@ -15,7 +15,7 @@
15	# Knobs. Every mirror arg defaults to the official/global source, exactly like docker/base; pass	15	# Knobs. Every mirror arg defaults to the official/global source, exactly like docker/base; pass
16	# --build-arg to swap to an in-region mirror on network-restricted hosts (see README).	16	# --build-arg to swap to an in-region mirror on network-restricted hosts (see README).
17	# ----------------------------------------------------------------------------------------------------------	17	# ----------------------------------------------------------------------------------------------------------
18	-ARG BASE_IMAGE=cann-toolkit-base:9.0.1-py3.13	18	+ARG BASE_IMAGE=cann-toolkit-base:9.1.0-py3.13
19		19
20	FROM ${BASE_IMAGE}	20	FROM ${BASE_IMAGE}
21		21
	@@ -123,6 +123,13 @@ RUN . /usr/local/Ascend/ascend-toolkit/set_env.sh 2>/dev/null \|\| true; \
123	&& /opt/venv/bin/python3 -c 'from cann_bench_utils import cann_bench_warmup, cann_bench_cache_clean'	123	&& /opt/venv/bin/python3 -c 'from cann_bench_utils import cann_bench_warmup, cann_bench_cache_clean'
124	ENV NPU_ARCH=${NPU_ARCH}	124	ENV NPU_ARCH=${NPU_ARCH}
125		125
		126	+# Which image produced a report. docker/eval/build.sh passes its own tag here and setup_info reads it
		127	+# for the report's "docker" field -- that field used to be the hardcoded string "cake-ci / CANN 9.0.0",
		128	+# which kept appearing long after both the image and the CANN version had moved on. Empty on a
		129	+# hand-rolled `docker build`; setup_info then says "container" rather than inventing a name.
		130	+ARG CANN_BENCH_IMAGE=
		131	+ENV CANN_BENCH_IMAGE=${CANN_BENCH_IMAGE}
		132	+
126	# Optional Triton-Ascend runtime (large); same semantics as the dev image's build-arg.	133	# Optional Triton-Ascend runtime (large); same semantics as the dev image's build-arg.
127	ARG TRITON_ASCEND_VERSION=	134	ARG TRITON_ASCEND_VERSION=
128	ARG TRITON_ASCEND_INDEX_URL=https://triton-ascend.osinfra.cn/pypi/simple	135	ARG TRITON_ASCEND_INDEX_URL=https://triton-ascend.osinfra.cn/pypi/simple

Mdocker/eval/README.md+1-3

	@@ -30,7 +30,7 @@ harness 冻结在镜像里(`src/kernel_eval` + `tasks/` + `cann_bench_utils` 全
30	这是原生构建,不是交叉编译):	30	这是原生构建,不是交叉编译):
31		31
32	```bash	32	```bash
33	-cd docker/base && docker build --build-arg ARCH=$(uname -m) -t cann-toolkit-base:9.0.1-py3.13 .	33	+cd docker/base && docker build --build-arg ARCH=$(uname -m) -t cann-toolkit-base:9.1.0-py3.13 .
34	```	34	```
35		35
36	然后(build context 必须是仓库根,`build.sh` 已经处理好):	36	然后(build context 必须是仓库根,`build.sh` 已经处理好):
	@@ -162,8 +162,6 @@ docker run ... -v "$PWD:/opt/cann-bench" cann-bench-eval:... /submission --opera
162		162
163	## 已知取舍	163	## 已知取舍
164		164
165	-- 底座的 `torch_npu==2.10.0.post2` 与仓库 `pyproject.toml` 钉的 `2.10.0` 不是同一串号(同属 2.10
166	- 系)。沿用底座的 post2,避免为了对齐版本号把整个 torch 栈重装一遍。
167	- `tasks/` 烘进镜像,所以镜像 tag 即 benchmark 版本;开发期用上面的 `-v` 覆盖回工作树。	165	- `tasks/` 烘进镜像,所以镜像 tag 即 benchmark 版本;开发期用上面的 `-v` 覆盖回工作树。
168	- `cann_bench_utils` 在 build 期就编好装好(只要 bisheng,不需要 NPU),容器起来直接开跑,	166	- `cann_bench_utils` 在 build 期就编好装好(只要 bisheng,不需要 NPU),容器起来直接开跑,
169	`ensure_cann_bench_utils()` 短路返回。它含 SoC 相关 kernel,所以本镜像 per-SoC。	167	`ensure_cann_bench_utils()` 短路返回。它含 SoC 相关 kernel,所以本镜像 per-SoC。

Mdocker/eval/build.sh+4-1

	@@ -25,7 +25,7 @@ case "${ARCH}" in
25	*) echo "unsupported ARCH=${ARCH} (expected aarch64 \| x86_64)" >&2; exit 1 ;;	25	*) echo "unsupported ARCH=${ARCH} (expected aarch64 \| x86_64)" >&2; exit 1 ;;
26	esac	26	esac
27	NPU_ARCH="${NPU_ARCH:-ascend910b}"	27	NPU_ARCH="${NPU_ARCH:-ascend910b}"
28	-CANN_VERSION="${CANN_VERSION:-9.0.1}"	28	+CANN_VERSION="${CANN_VERSION:-9.1.0}"
29	BASE_IMAGE="${BASE_IMAGE:-cann-toolkit-base:${CANN_VERSION}-py3.13}"	29	BASE_IMAGE="${BASE_IMAGE:-cann-toolkit-base:${CANN_VERSION}-py3.13}"
30	TRITON_ASCEND_VERSION="${TRITON_ASCEND_VERSION:-}"	30	TRITON_ASCEND_VERSION="${TRITON_ASCEND_VERSION:-}"
31		31
	@@ -52,6 +52,9 @@ ARGS=(
52	--build-arg "OPS_PKG=${OPS_PKG}"	52	--build-arg "OPS_PKG=${OPS_PKG}"
53	--build-arg "NPU_ARCH=${NPU_ARCH}"	53	--build-arg "NPU_ARCH=${NPU_ARCH}"
54	--build-arg "TRITON_ASCEND_VERSION=${TRITON_ASCEND_VERSION}"	54	--build-arg "TRITON_ASCEND_VERSION=${TRITON_ASCEND_VERSION}"
		55	+ # The tag is the only thing that knows which image a report came from; hand it to the image so
		56	+ # setup_info prints it instead of the hardcoded string the report used to carry.
		57	+ --build-arg "CANN_BENCH_IMAGE=${IMAGE}"
55	)	58	)
56		59
57	# One switch for the whole in-region mirror set, rather than five build-args at every call site.	60	# One switch for the whole in-region mirror set, rather than five build-args at every call site.

Mdocker/eval/pyproject.toml+1-1

	@@ -20,7 +20,7 @@ requires-python = "==3.13.*"
20	dependencies = [	20	dependencies = [
21	# ---- identical to docker/base/pyproject.toml ----	21	# ---- identical to docker/base/pyproject.toml ----
22	"torch==2.10.0",	22	"torch==2.10.0",
23	- "torch-npu==2.10.0.post2",	23	+ "torch-npu==2.10.0.post4",
24	"numpy", "pyyaml", "decorator", "attrs", "scipy", "cloudpickle", "ml-dtypes", "psutil",	24	"numpy", "pyyaml", "decorator", "attrs", "scipy", "cloudpickle", "ml-dtypes", "psutil",
25	"filelock", "typing-extensions", "sympy", "networkx", "jinja2", "fsspec", "mpmath", "markupsafe",	25	"filelock", "typing-extensions", "sympy", "networkx", "jinja2", "fsspec", "mpmath", "markupsafe",
26	"pip", "setuptools", "wheel", "build",	26	"pip", "setuptools", "wheel", "build",

Mdocker/eval/uv.lock+4-4

	@@ -92,7 +92,7 @@ requires-dist = [
92	{ name = "setuptools" },	92	{ name = "setuptools" },
93	{ name = "sympy" },	93	{ name = "sympy" },
94	{ name = "torch", specifier = "==2.10.0", index = "https://download.pytorch.org/whl/cpu" },	94	{ name = "torch", specifier = "==2.10.0", index = "https://download.pytorch.org/whl/cpu" },
95	- { name = "torch-npu", specifier = "==2.10.0.post2" },	95	+ { name = "torch-npu", specifier = "==2.10.0.post4" },
96	{ name = "torchvision", index = "https://download.pytorch.org/whl/cpu" },	96	{ name = "torchvision", index = "https://download.pytorch.org/whl/cpu" },
97	{ name = "tornado" },	97	{ name = "tornado" },
98	{ name = "typing-extensions" },	98	{ name = "typing-extensions" },
	@@ -419,14 +419,14 @@ wheels = [
419		419
420	[[package]]	420	[[package]]
421	name = "torch-npu"	421	name = "torch-npu"
422	-version = "2.10.0.post2"	422	+version = "2.10.0.post4"
423	source = { registry = "https://pypi.org/simple" }	423	source = { registry = "https://pypi.org/simple" }
424	dependencies = [	424	dependencies = [
425	{ name = "torch" },	425	{ name = "torch" },
426	]	426	]
427	wheels = [	427	wheels = [
428	- { url = "https://files.pythonhosted.org/packages/9c/67/438d901072bb339c8c732e3635c49dcc8489d695aa59c78945001b057aa2/torch_npu-2.10.0.post2-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:157c2c7b59497dd70846b5e8038e142bcea6fd13a9072159732e3b8004593d48", size = 32522503, upload-time = "2026-07-02T02:24:00.506Z" },	428	+ { url = "https://files.pythonhosted.org/packages/aa/8a/525206571e3a0f9a36363ae55a424b34bac790c8ce10129051e7e8336be6/torch_npu-2.10.0.post4-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:2d88ce46c69cfa562453925865805ca8c358cea31176ff9b284e7851eda213d0", size = 36258846, upload-time = "2026-07-27T07:30:49.174Z" },
429	- { url = "https://files.pythonhosted.org/packages/92/ff/80eb5e6b8788dd8e5d0c9c75b780a176f1a32e49e4ba90889584877c3446/torch_npu-2.10.0.post2-cp313-cp313-manylinux_2_28_x86_64.whl", hash = "sha256:8f6eac66b9db2d956b5136f5e072d5fb7c0524bcaa90d6a3ac71a044705d475b", size = 35881624, upload-time = "2026-07-02T02:24:17.603Z" },	429	+ { url = "https://files.pythonhosted.org/packages/48/a5/c7c2fc0139c55393d9ff3116b0c6ec62bf5ea6257f1a64515927e31dcd27/torch_npu-2.10.0.post4-cp313-cp313-manylinux_2_28_x86_64.whl", hash = "sha256:e6ac70748c9d03312afb1fc5cf84b69d1b955a59555116e286cf7a10a302be9e", size = 39987520, upload-time = "2026-07-27T07:31:25.567Z" },
430	]	430	]
431		431
432	[[package]]	432	[[package]]

Mdocs/design/evaluator_design.md+1-1

	@@ -966,7 +966,7 @@ setup = collect_setup_info(config)
966	# "pytorch_npu": "2.1.0.post3",	966	# "pytorch_npu": "2.1.0.post3",
967	# "python": "3.10.12",	967	# "python": "3.10.12",
968	# "os": "Linux-5.10.0...",	968	# "os": "Linux-5.10.0...",
969	-# "docker": "cake-ci / CANN 9.0.0",	969	+# "docker": "cann-bench-eval:1.0.0-ascend910b-aarch64-opsnone / CANN 9.1.0",
970	# },	970	# },
971	# }	971	# }
972	```	972	```

Mdocs/design/report_design.md+5-5

	@@ -166,7 +166,7 @@ eval_YYYYMMDD_HHMMSS.html ← 完整 HTML 报告
166	"torchvision": "0.22.1+cpu",	166	"torchvision": "0.22.1+cpu",
167	"python": "3.12.9",	167	"python": "3.12.9",
168	"os": "Linux-6.6.0-132.0.0.111.oe2403sp3.x86_64",	168	"os": "Linux-6.6.0-132.0.0.111.oe2403sp3.x86_64",
169	- "docker": "cake-ci / CANN 9.0.0"	169	+ "docker": "cann-bench-eval:1.0.0-ascend910b-aarch64-opsnone / CANN 9.1.0"
170	}	170	}
171	},	171	},
172	"operators": [	172	"operators": [
	@@ -214,12 +214,12 @@ eval_YYYYMMDD_HHMMSS.html ← 完整 HTML 报告
214	├─────────────────────────────────────────┤	214	├─────────────────────────────────────────┤
215	│ │	215	│ │
216	│ metadata: │	216	│ metadata: │
217	-│ framework ← "CANN-Bench V0.1.0" │	217	+│ framework ← "CANN-Bench V0.1.0" │
218	│ date ← datetime.now() │	218	│ date ← datetime.now() │
219	│ agent_skill← config.agent_skill │	219	│ agent_skill← config.agent_skill │
220	│ base_model ← config.base_model │	220	│ base_model ← config.base_model │
221	│ benchmark ← "CANN-Bench tasks" │	221	│ benchmark ← "CANN-Bench tasks" │
222	-│ license ← 固定 │	222	+│ license ← 固定 │
223	│ │	223	│ │
224	│ environment: │	224	│ environment: │
225	│ npu ← torch_npu.get_device_ │	225	│ npu ← torch_npu.get_device_ │
	@@ -233,8 +233,8 @@ eval_YYYYMMDD_HHMMSS.html ← 完整 HTML 报告
233	│ torchvision← torchvision.__version__ │	233	│ torchvision← torchvision.__version__ │
234	│ python ← sys.version │	234	│ python ← sys.version │
235	│ os ← platform.platform() │	235	│ os ← platform.platform() │
236	-│ docker ← "cake-ci / CANN 9.0.0" │	236	+│ docker ← $CANN_BENCH_IMAGE │
237	-│ (硬编码，后续改软编码) │	237	+│ + 实测 CANN 版本 │
238	└─────────────────────────────────────────┘	238	└─────────────────────────────────────────┘
239	```	239	```
240		240

Mpyproject.toml+1-1

	@@ -21,7 +21,7 @@ dependencies = [
21	"expecttest",	21	"expecttest",
22	"protobuf",	22	"protobuf",
23	"ruamel.yaml>=0.18",	23	"ruamel.yaml>=0.18",
24	- "torch_npu==2.10.0",	24	+ "torch_npu==2.10.0.post4",
25	]	25	]
26		26
27	[project.optional-dependencies]	27	[project.optional-dependencies]

Msrc/kernel_eval/report/report_template.html+1-1

	@@ -584,7 +584,7 @@ body{
584	<tr><td class="kv-k">PyTorch NPU</td><td>2.7.1.post5</td></tr>	584	<tr><td class="kv-k">PyTorch NPU</td><td>2.7.1.post5</td></tr>
585	<tr><td class="kv-k">Python</td><td>3.12.9</td></tr>	585	<tr><td class="kv-k">Python</td><td>3.12.9</td></tr>
586	<tr><td class="kv-k">OS</td><td>Linux 5.10.0 hce2 aarch64</td></tr>	586	<tr><td class="kv-k">OS</td><td>Linux 5.10.0 hce2 aarch64</td></tr>
587	- <tr><td class="kv-k">Docker</td><td>cake-ci / CANN 9.0.0</td></tr>	587	+ <tr><td class="kv-k">Docker</td><td>cann-bench-eval:1.0.0-ascend910b-aarch64-opsnone / CANN 9.1.0</td></tr>
588	</tbody>	588	</tbody>
589	</table>	589	</table>
590	</div>	590	</div>

Msrc/kernel_eval/report/setup_info.py+33-3

         return "unknown"
++def _in_container() -> bool:
++    """是否跑在容器里。/.dockerenv 覆盖 docker，cgroup 里的 docker/containerd/kubepods
++    覆盖 k8s（CI 的评测 pod 就是这一支）。两者都读不到就当作裸机。"""
++    if os.path.exists("/.dockerenv"):
++        return True
++    try:
++        with open("/proc/1/cgroup") as f:
++            blob = f.read()
++        return any(k in blob for k in ("docker", "containerd", "kubepods"))
++    except Exception:
++        return False
++
++
 def _detect_docker() -> Optional[str]:
++    """报告里的 "docker" 字段：镜像标识 + 其 CANN 版本。
++
++    Why not 硬编码: 这里原本写死 "cake-ci / CANN 9.0.0"。镜像早已换代、CANN 也升到
++    9.1.0 之后，那行字仍原样出现在每一份报告里 —— 同一份报告的 environment.cann 显示
++    9.1.0、docker 显示 9.0.0，自相矛盾，且读报告的人无从知道哪个可信。
++
++    取值顺序：
++      1. CANN_BENCH_IMAGE —— 镜像自己注入的标识（docker/eval 会写成 <name>:<tag>），
++         最准确，因为只有构建镜像的人知道它叫什么。
++      2. 容器内但没注入 —— 回退成 "container"，至少不谎报具体镜像。
++      3. 不在容器里 —— None（报告里显示为空），而不是编一个。
++    CANN 版本一律取实际探测到的那个，与 environment.cann 同源，不会再对不上。
++    """
++    image = (os.environ.get("CANN_BENCH_IMAGE") or "").strip()
++    if not image:
++        if not _in_container():
++            return None
++        image = "container"
++    cann = _get_cann_version()
++    return f"{image} / CANN {cann}" if cann else image
 # ---------------------------------------------------------------------------

Atests/ut/test_setup_info.py+63-0

@@ -0,0 +1,63 @@
	1	+#!/usr/bin/python3
	2	+# coding=utf-8
	3	+
	4	+"""setup_info 的 docker 字段测试。
	5	+
	6	+Why this file exists: 该字段此前硬编码为 "cake-ci / CANN 9.0.0"，镜像换代、CANN 升到
	7	+9.1.0 之后仍原样出现在每一份报告里 —— 同一份报告 environment.cann 写 9.1.0、docker 写
	8	+9.0.0，自相矛盾。没有任何测试兜着它，所以谁也没发现。这里把三条取值路径都钉住。
	9	+"""
	10	+
	11	+import pytest
	12	+
	13	+from kernel_eval.report import setup_info
	14	+
	15	+
	16	+@pytest.fixture
	17	+def no_container(monkeypatch):
	18	+ """默认按"不在容器里"跑，单个用例再按需打开。"""
	19	+ monkeypatch.setattr(setup_info, "_in_container", lambda: False)
	20	+ monkeypatch.delenv("CANN_BENCH_IMAGE", raising=False)
	21	+
	22	+
	23	+class TestDetectDocker:
	24	+ def test_image_env_wins(self, monkeypatch, no_container):
	25	+ """镜像注入了标识就用它，且带上实际探测到的 CANN 版本。"""
	26	+ monkeypatch.setenv("CANN_BENCH_IMAGE", "cann-bench-eval:1.0.0-ascend910b-aarch64-opsnone")
	27	+ monkeypatch.setattr(setup_info, "_get_cann_version", lambda: "9.1.0")
	28	+ assert setup_info._detect_docker() == (
	29	+ "cann-bench-eval:1.0.0-ascend910b-aarch64-opsnone / CANN 9.1.0"
	30	+ )
	31	+
	32	+ def test_container_without_image_env_does_not_invent_a_name(self, monkeypatch):
	33	+ """在容器里但没注入标识 -> 只说 container，不编具体镜像名。"""
	34	+ monkeypatch.delenv("CANN_BENCH_IMAGE", raising=False)
	35	+ monkeypatch.setattr(setup_info, "_in_container", lambda: True)
	36	+ monkeypatch.setattr(setup_info, "_get_cann_version", lambda: "9.1.0")
	37	+ assert setup_info._detect_docker() == "container / CANN 9.1.0"
	38	+
	39	+ def test_bare_metal_returns_none(self, monkeypatch, no_container):
	40	+ """不在容器里就如实返回 None，而不是给个假值。"""
	41	+ monkeypatch.setattr(setup_info, "_get_cann_version", lambda: "9.1.0")
	42	+ assert setup_info._detect_docker() is None
	43	+
	44	+ def test_no_cann_detected_still_reports_the_image(self, monkeypatch, no_container):
	45	+ monkeypatch.setenv("CANN_BENCH_IMAGE", "some-image:tag")
	46	+ monkeypatch.setattr(setup_info, "_get_cann_version", lambda: None)
	47	+ assert setup_info._detect_docker() == "some-image:tag"
	48	+
	49	+ def test_blank_image_env_is_treated_as_unset(self, monkeypatch):
	50	+ """Dockerfile 的 ARG 留空时 ENV 会是空串，不能当成镜像名用。"""
	51	+ monkeypatch.setenv("CANN_BENCH_IMAGE", " ")
	52	+ monkeypatch.setattr(setup_info, "_in_container", lambda: True)
	53	+ monkeypatch.setattr(setup_info, "_get_cann_version", lambda: "9.1.0")
	54	+ assert setup_info._detect_docker() == "container / CANN 9.1.0"
	55	+
	56	+ def test_never_reports_a_cann_version_that_contradicts_environment(self, monkeypatch):
	57	+ """docker 字段里的 CANN 与 environment.cann 必须同源 —— 这正是旧硬编码的病。"""
	58	+ monkeypatch.setenv("CANN_BENCH_IMAGE", "img:tag")
	59	+ monkeypatch.setattr(setup_info, "_get_cann_version", lambda: "9.1.0")
	60	+ info = setup_info.collect_setup_info()
	61	+ env = info["environment"]
	62	+ assert env["cann"] == "9.1.0"
	63	+ assert env["docker"] == "img:tag / CANN 9.1.0"

Muv.lock+123-76

	@@ -26,62 +26,79 @@ name = "black"
26	version = "26.5.1"	26	version = "26.5.1"
27	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	27	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
28	dependencies = [	28	dependencies = [
29	- { name = "click", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	29	+ { name = "click" },
30	- { name = "mypy-extensions", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	30	+ { name = "mypy-extensions" },
31	- { name = "packaging", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	31	+ { name = "packaging" },
32	- { name = "pathspec", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	32	+ { name = "pathspec" },
33	- { name = "platformdirs", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	33	+ { name = "platformdirs" },
34	- { name = "pytokens", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	34	+ { name = "pytokens" },
35	- { name = "tomli", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	35	+ { name = "tomli", marker = "python_full_version < '3.11'" },
36	- { name = "typing-extensions", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	36	+ { name = "typing-extensions", marker = "python_full_version < '3.11'" },
37	]	37	]
38	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/c0/37/5628dd55bf2b34257fc7603f0fe97c40e3aaf24265f416a9c85c95ca1436/black-26.5.1.tar.gz", hash = "sha256:dd321f668053961824bcc1be1cc1df748b2d7e4fa28086b08331e577b0100a73" }	38	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/c0/37/5628dd55bf2b34257fc7603f0fe97c40e3aaf24265f416a9c85c95ca1436/black-26.5.1.tar.gz", hash = "sha256:dd321f668053961824bcc1be1cc1df748b2d7e4fa28086b08331e577b0100a73" }
39	wheels = [	39	wheels = [
40	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/94/51/f975cae76d44274cc2868dc9040ac5d58d464784610234455b4e7b19c6ef/black-26.5.1-py3-none-any.whl", hash = "sha256:4ed7f7da04046d2e488437170797d3b4a4ad83906683bcb7dfc68b673bbce5e2" },	40	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/94/51/f975cae76d44274cc2868dc9040ac5d58d464784610234455b4e7b19c6ef/black-26.5.1-py3-none-any.whl", hash = "sha256:4ed7f7da04046d2e488437170797d3b4a4ad83906683bcb7dfc68b673bbce5e2" },
41	]	41	]
42		42
		43	+[[package]]
		44	+name = "build"
		45	+version = "1.5.1"
		46	+source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
		47	+dependencies = [
		48	+ { name = "importlib-metadata", marker = "python_full_version < '3.10.2'" },
		49	+ { name = "packaging" },
		50	+ { name = "pyproject-hooks" },
		51	+ { name = "tomli", marker = "python_full_version < '3.11'" },
		52	+]
		53	+sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/2d/21/6ec54248b4d0d51f12f3ca4aa77a128077d747a5db86cb5a2fcd9aedecbd/build-1.5.1.tar.gz", hash = "sha256:94e17f1db803ab22f46049376c44c8437c52090f0dfdf1adc43df56542d644fb" }
		54	+wheels = [
		55	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/c7/f7/2c3f99ff9282f1c1ec9f6298f2c03034658a0901eeacb3b3501cb488574c/build-1.5.1-py3-none-any.whl", hash = "sha256:f1a58fe2e5af5b0238a07b9e70207492c79ddebbdb1ad954fc86d62a56be3e0d" },
		56	+]
		57	+
43	[[package]]	58	[[package]]
44	name = "cann-bench"	59	name = "cann-bench"
45	-version = "0.4.0"	60	+version = "1.0.0"
46	source = { virtual = "." }	61	source = { virtual = "." }
47	dependencies = [	62	dependencies = [
48	- { name = "attrs", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	63	+ { name = "attrs" },
49	- { name = "cloudpickle", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	64	+ { name = "build" },
50	- { name = "decorator", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	65	+ { name = "cloudpickle" },
51	- { name = "expecttest", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	66	+ { name = "decorator" },
52	- { name = "ml-dtypes", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	67	+ { name = "expecttest" },
53	- { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	68	+ { name = "ml-dtypes" },
54	- { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	69	+ { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11'" },
55	- { name = "pandas", version = "2.3.3", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	70	+ { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11'" },
56	- { name = "pandas", version = "3.0.3", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	71	+ { name = "pandas", version = "2.3.3", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11'" },
57	- { name = "protobuf", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	72	+ { name = "pandas", version = "3.0.3", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11'" },
58	- { name = "psutil", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	73	+ { name = "protobuf" },
59	- { name = "pyyaml", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	74	+ { name = "psutil" },
60	- { name = "ruamel-yaml", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	75	+ { name = "pyyaml" },
61	- { name = "scipy", version = "1.15.3", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	76	+ { name = "ruamel-yaml" },
62	- { name = "scipy", version = "1.17.1", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	77	+ { name = "scipy", version = "1.15.3", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11'" },
63	- { name = "torch", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	78	+ { name = "scipy", version = "1.17.1", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11'" },
64	- { name = "torch-npu", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	79	+ { name = "torch" },
65	- { name = "tornado", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	80	+ { name = "torch-npu" },
		81	+ { name = "tornado" },
66	]	82	]
67		83
68	[package.optional-dependencies]	84	[package.optional-dependencies]
69	vision = [	85	vision = [
70	- { name = "torchvision", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	86	+ { name = "torchvision" },
71	]	87	]
72		88
73	[package.dev-dependencies]	89	[package.dev-dependencies]
74	dev = [	90	dev = [
75	- { name = "black", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	91	+ { name = "black" },
76	- { name = "flake8", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	92	+ { name = "flake8" },
77	- { name = "isort", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	93	+ { name = "isort" },
78	- { name = "pytest", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	94	+ { name = "pytest" },
79	- { name = "pytest-timeout", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	95	+ { name = "pytest-timeout" },
80	]	96	]
81		97
82	[package.metadata]	98	[package.metadata]
83	requires-dist = [	99	requires-dist = [
84	{ name = "attrs" },	100	{ name = "attrs" },
		101	+ { name = "build" },
85	{ name = "cloudpickle" },	102	{ name = "cloudpickle" },
86	{ name = "decorator" },	103	{ name = "decorator" },
87	{ name = "expecttest" },	104	{ name = "expecttest" },
	@@ -94,7 +111,7 @@ requires-dist = [
94	{ name = "ruamel-yaml", specifier = ">=0.18" },	111	{ name = "ruamel-yaml", specifier = ">=0.18" },
95	{ name = "scipy" },	112	{ name = "scipy" },
96	{ name = "torch", specifier = "==2.10.0" },	113	{ name = "torch", specifier = "==2.10.0" },
97	- { name = "torch-npu", specifier = "==2.10.0" },	114	+ { name = "torch-npu", specifier = "==2.10.0.post4" },
98	{ name = "torchvision", marker = "extra == 'vision'", specifier = ">=0.18.0" },	115	{ name = "torchvision", marker = "extra == 'vision'", specifier = ">=0.18.0" },
99	{ name = "tornado" },	116	{ name = "tornado" },
100	]	117	]
	@@ -141,7 +158,7 @@ name = "exceptiongroup"
141	version = "1.3.1"	158	version = "1.3.1"
142	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	159	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
143	dependencies = [	160	dependencies = [
144	- { name = "typing-extensions", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	161	+ { name = "typing-extensions" },
145	]	162	]
146	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/50/79/66800aadf48771f6b62f7eb014e352e5d06856655206165d775e675a02c9/exceptiongroup-1.3.1.tar.gz", hash = "sha256:8b412432c6055b0b7d14c310000ae93352ed6754f70fa8f7c34141f91c4e3219" }	163	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/50/79/66800aadf48771f6b62f7eb014e352e5d06856655206165d775e675a02c9/exceptiongroup-1.3.1.tar.gz", hash = "sha256:8b412432c6055b0b7d14c310000ae93352ed6754f70fa8f7c34141f91c4e3219" }
147	wheels = [	164	wheels = [
	@@ -171,9 +188,9 @@ name = "flake8"
171	version = "7.3.0"	188	version = "7.3.0"
172	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	189	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
173	dependencies = [	190	dependencies = [
174	- { name = "mccabe", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	191	+ { name = "mccabe" },
175	- { name = "pycodestyle", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	192	+ { name = "pycodestyle" },
176	- { name = "pyflakes", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	193	+ { name = "pyflakes" },
177	]	194	]
178	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/9b/af/fbfe3c4b5a657d79e5c47a2827a362f9e1b763336a52f926126aa6dc7123/flake8-7.3.0.tar.gz", hash = "sha256:fe044858146b9fc69b551a4b490d69cf960fcb78ad1edcb84e7fbb1b4a8e3872" }	195	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/9b/af/fbfe3c4b5a657d79e5c47a2827a362f9e1b763336a52f926126aa6dc7123/flake8-7.3.0.tar.gz", hash = "sha256:fe044858146b9fc69b551a4b490d69cf960fcb78ad1edcb84e7fbb1b4a8e3872" }
179	wheels = [	196	wheels = [
	@@ -189,6 +206,18 @@ wheels = [
189	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/d5/0c/043d5e551459da400957a1395e0febbf771446ff34291afcbe3d8be2a279/fsspec-2026.4.0-py3-none-any.whl", hash = "sha256:11ef7bb35dab8a394fde6e608221d5cf3e8499401c249bebaeaad760a1a8dec2" },	206	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/d5/0c/043d5e551459da400957a1395e0febbf771446ff34291afcbe3d8be2a279/fsspec-2026.4.0-py3-none-any.whl", hash = "sha256:11ef7bb35dab8a394fde6e608221d5cf3e8499401c249bebaeaad760a1a8dec2" },
190	]	207	]
191		208
		209	+[[package]]
		210	+name = "importlib-metadata"
		211	+version = "9.0.0"
		212	+source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
		213	+dependencies = [
		214	+ { name = "zipp" },
		215	+]
		216	+sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/a9/01/15bb152d77b21318514a96f43af312635eb2500c96b55398d020c93d86ea/importlib_metadata-9.0.0.tar.gz", hash = "sha256:a4f57ab599e6a2e3016d7595cfd72eb4661a5106e787a95bcc90c7105b831efc" }
		217	+wheels = [
		218	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/38/3d/2d244233ac4f76e38533cfcb2991c9eb4c7bf688ae0a036d30725b8faafe/importlib_metadata-9.0.0-py3-none-any.whl", hash = "sha256:2d21d1cc5a017bd0559e36150c21c830ab1dc304dedd1b7ea85d20f45ef3edd7" },
		219	+]
		220	+
192	[[package]]	221	[[package]]
193	name = "iniconfig"	222	name = "iniconfig"
194	version = "2.3.0"	223	version = "2.3.0"
	@@ -212,7 +241,7 @@ name = "jinja2"
212	version = "3.1.6"	241	version = "3.1.6"
213	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	242	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
214	dependencies = [	243	dependencies = [
215	- { name = "markupsafe", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	244	+ { name = "markupsafe" },
216	]	245	]
217	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/df/bf/f7da0350254c0ed7c72f3e33cef02e048281fec7ecec5f032d4aac52226b/jinja2-3.1.6.tar.gz", hash = "sha256:0137fb05990d35f1275a587e9aee6d56da821fc83491a0fb838183be43f66d6d" }	246	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/df/bf/f7da0350254c0ed7c72f3e33cef02e048281fec7ecec5f032d4aac52226b/jinja2-3.1.6.tar.gz", hash = "sha256:0137fb05990d35f1275a587e9aee6d56da821fc83491a0fb838183be43f66d6d" }
218	wheels = [	247	wheels = [
	@@ -255,8 +284,8 @@ name = "ml-dtypes"
255	version = "0.5.4"	284	version = "0.5.4"
256	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	285	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
257	dependencies = [	286	dependencies = [
258	- { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	287	+ { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11'" },
259	- { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	288	+ { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11'" },
260	]	289	]
261	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/0e/4a/c27b42ed9b1c7d13d9ba8b6905dece787d6259152f2309338aed29b2447b/ml_dtypes-0.5.4.tar.gz", hash = "sha256:8ab06a50fb9bf9666dd0fe5dfb4676fa2b0ac0f31ecff72a6c3af8e22c063453" }	290	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/0e/4a/c27b42ed9b1c7d13d9ba8b6905dece787d6259152f2309338aed29b2447b/ml_dtypes-0.5.4.tar.gz", hash = "sha256:8ab06a50fb9bf9666dd0fe5dfb4676fa2b0ac0f31ecff72a6c3af8e22c063453" }
262	wheels = [	291	wheels = [
	@@ -379,10 +408,10 @@ resolution-markers = [
379	"python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'",	408	"python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'",
380	]	409	]
381	dependencies = [	410	dependencies = [
382	- { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	411	+ { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" } },
383	- { name = "python-dateutil", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	412	+ { name = "python-dateutil" },
384	- { name = "pytz", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	413	+ { name = "pytz" },
385	- { name = "tzdata", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	414	+ { name = "tzdata" },
386	]	415	]
387	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/33/01/d40b85317f86cf08d853a4f495195c73815fdf205eef3993821720274518/pandas-2.3.3.tar.gz", hash = "sha256:e05e1af93b977f7eafa636d043f9f94c7ee3ac81af99c13508215942e64c993b" }	416	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/33/01/d40b85317f86cf08d853a4f495195c73815fdf205eef3993821720274518/pandas-2.3.3.tar.gz", hash = "sha256:e05e1af93b977f7eafa636d043f9f94c7ee3ac81af99c13508215942e64c993b" }
388	wheels = [	417	wheels = [
	@@ -413,8 +442,8 @@ resolution-markers = [
413	"python_full_version == '3.11.*' and platform_machine == 'aarch64' and sys_platform == 'linux'",	442	"python_full_version == '3.11.*' and platform_machine == 'aarch64' and sys_platform == 'linux'",
414	]	443	]
415	dependencies = [	444	dependencies = [
416	- { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	445	+ { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" } },
417	- { name = "python-dateutil", marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	446	+ { name = "python-dateutil" },
418	]	447	]
419	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/f8/87/4341c6252d1c47b08768c3d25ac487362bf403f0313ddae4a2a26c9b1b4c/pandas-3.0.3.tar.gz", hash = "sha256:696a4a00a2a2a35d4e5deb3fc946641b96c944f02230e4f76137fe35d806c4fc" }	448	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/f8/87/4341c6252d1c47b08768c3d25ac487362bf403f0313ddae4a2a26c9b1b4c/pandas-3.0.3.tar.gz", hash = "sha256:696a4a00a2a2a35d4e5deb3fc946641b96c944f02230e4f76137fe35d806c4fc" }
420	wheels = [	449	wheels = [
	@@ -543,17 +572,26 @@ wheels = [
543	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/f4/7e/a72dd26f3b0f4f2bf1dd8923c85f7ceb43172af56d63c7383eb62b332364/pygments-2.20.0-py3-none-any.whl", hash = "sha256:81a9e26dd42fd28a23a2d169d86d7ac03b46e2f8b59ed4698fb4785f946d0176" },	572	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/f4/7e/a72dd26f3b0f4f2bf1dd8923c85f7ceb43172af56d63c7383eb62b332364/pygments-2.20.0-py3-none-any.whl", hash = "sha256:81a9e26dd42fd28a23a2d169d86d7ac03b46e2f8b59ed4698fb4785f946d0176" },
544	]	573	]
545		574
		575	+[[package]]
		576	+name = "pyproject-hooks"
		577	+version = "1.2.0"
		578	+source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
		579	+sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/e7/82/28175b2414effca1cdac8dc99f76d660e7a4fb0ceefa4b4ab8f5f6742925/pyproject_hooks-1.2.0.tar.gz", hash = "sha256:1e859bd5c40fae9448642dd871adf459e5e2084186e8d2c2a79a824c970da1f8" }
		580	+wheels = [
		581	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/bd/24/12818598c362d7f300f18e74db45963dbcb85150324092410c8b49405e42/pyproject_hooks-1.2.0-py3-none-any.whl", hash = "sha256:9e5c6bfa8dcc30091c74b0cf803c81fdd29d94f01992a7707bc97babb1141913" },
		582	+]
		583	+
546	[[package]]	584	[[package]]
547	name = "pytest"	585	name = "pytest"
548	version = "9.0.3"	586	version = "9.0.3"
549	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	587	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
550	dependencies = [	588	dependencies = [
551	- { name = "exceptiongroup", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	589	+ { name = "exceptiongroup", marker = "python_full_version < '3.11'" },
552	- { name = "iniconfig", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	590	+ { name = "iniconfig" },
553	- { name = "packaging", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	591	+ { name = "packaging" },
554	- { name = "pluggy", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	592	+ { name = "pluggy" },
555	- { name = "pygments", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	593	+ { name = "pygments" },
556	- { name = "tomli", marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	594	+ { name = "tomli", marker = "python_full_version < '3.11'" },
557	]	595	]
558	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/7d/0d/549bd94f1a0a402dc8cf64563a117c0f3765662e2e668477624baeec44d5/pytest-9.0.3.tar.gz", hash = "sha256:b86ada508af81d19edeb213c681b1d48246c1a91d304c6c81a427674c17eb91c" }	596	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/7d/0d/549bd94f1a0a402dc8cf64563a117c0f3765662e2e668477624baeec44d5/pytest-9.0.3.tar.gz", hash = "sha256:b86ada508af81d19edeb213c681b1d48246c1a91d304c6c81a427674c17eb91c" }
559	wheels = [	597	wheels = [
	@@ -565,7 +603,7 @@ name = "pytest-timeout"
565	version = "2.4.0"	603	version = "2.4.0"
566	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	604	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
567	dependencies = [	605	dependencies = [
568	- { name = "pytest", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	606	+ { name = "pytest" },
569	]	607	]
570	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/ac/82/4c9ecabab13363e72d880f2fb504c5f750433b2b6f16e99f4ec21ada284c/pytest_timeout-2.4.0.tar.gz", hash = "sha256:7e68e90b01f9eff71332b25001f85c75495fc4e3a836701876183c4bcfd0540a" }	608	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/ac/82/4c9ecabab13363e72d880f2fb504c5f750433b2b6f16e99f4ec21ada284c/pytest_timeout-2.4.0.tar.gz", hash = "sha256:7e68e90b01f9eff71332b25001f85c75495fc4e3a836701876183c4bcfd0540a" }
571	wheels = [	609	wheels = [
	@@ -577,7 +615,7 @@ name = "python-dateutil"
577	version = "2.9.0.post0"	615	version = "2.9.0.post0"
578	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	616	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
579	dependencies = [	617	dependencies = [
580	- { name = "six", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	618	+ { name = "six" },
581	]	619	]
582	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/66/c0/0c8b6ad9f17a802ee498c46e004a0eb49bc148f2fd230864601a86dcf6db/python-dateutil-2.9.0.post0.tar.gz", hash = "sha256:37dd54208da7e1cd875388217d5e00ebd4179249f90fb72437e91a35459a0ad3" }	620	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/66/c0/0c8b6ad9f17a802ee498c46e004a0eb49bc148f2fd230864601a86dcf6db/python-dateutil-2.9.0.post0.tar.gz", hash = "sha256:37dd54208da7e1cd875388217d5e00ebd4179249f90fb72437e91a35459a0ad3" }
583	wheels = [	621	wheels = [
	@@ -645,7 +683,7 @@ resolution-markers = [
645	"python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'",	683	"python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'",
646	]	684	]
647	dependencies = [	685	dependencies = [
648	- { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	686	+ { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" } },
649	]	687	]
650	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/0f/37/6964b830433e654ec7485e45a00fc9a27cf868d622838f6b6d9c5ec0d532/scipy-1.15.3.tar.gz", hash = "sha256:eae3cf522bc7df64b42cad3925c876e1b0b6c35c1337c93e12c0f366f55b0eaf" }	688	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/0f/37/6964b830433e654ec7485e45a00fc9a27cf868d622838f6b6d9c5ec0d532/scipy-1.15.3.tar.gz", hash = "sha256:eae3cf522bc7df64b42cad3925c876e1b0b6c35c1337c93e12c0f366f55b0eaf" }
651	wheels = [	689	wheels = [
	@@ -672,7 +710,7 @@ resolution-markers = [
672	"python_full_version == '3.11.*' and platform_machine == 'aarch64' and sys_platform == 'linux'",	710	"python_full_version == '3.11.*' and platform_machine == 'aarch64' and sys_platform == 'linux'",
673	]	711	]
674	dependencies = [	712	dependencies = [
675	- { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	713	+ { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" } },
676	]	714	]
677	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/7a/97/5a3609c4f8d58b039179648e62dd220f89864f56f7357f5d4f45c29eb2cc/scipy-1.17.1.tar.gz", hash = "sha256:95d8e012d8cb8816c226aef832200b1d45109ed4464303e997c5b13122b297c0" }	715	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/7a/97/5a3609c4f8d58b039179648e62dd220f89864f56f7357f5d4f45c29eb2cc/scipy-1.17.1.tar.gz", hash = "sha256:95d8e012d8cb8816c226aef832200b1d45109ed4464303e997c5b13122b297c0" }
678	wheels = [	716	wheels = [
	@@ -713,7 +751,7 @@ name = "sympy"
713	version = "1.14.0"	751	version = "1.14.0"
714	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	752	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
715	dependencies = [	753	dependencies = [
716	- { name = "mpmath", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	754	+ { name = "mpmath" },
717	]	755	]
718	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/83/d3/803453b36afefb7c2bb238361cd4ae6125a569b4db67cd9e79846ba2d68c/sympy-1.14.0.tar.gz", hash = "sha256:d3d3fe8df1e5a0b42f0e7bdf50541697dbe7d23746e894990c030e2b05e72517" }	756	sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/83/d3/803453b36afefb7c2bb238361cd4ae6125a569b4db67cd9e79846ba2d68c/sympy-1.14.0.tar.gz", hash = "sha256:d3d3fe8df1e5a0b42f0e7bdf50541697dbe7d23746e894990c030e2b05e72517" }
719	wheels = [	757	wheels = [
	@@ -744,14 +782,14 @@ name = "torch"
744	version = "2.10.0"	782	version = "2.10.0"
745	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	783	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
746	dependencies = [	784	dependencies = [
747	- { name = "filelock", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	785	+ { name = "filelock" },
748	- { name = "fsspec", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	786	+ { name = "fsspec" },
749	- { name = "jinja2", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	787	+ { name = "jinja2" },
750	- { name = "networkx", version = "3.4.2", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	788	+ { name = "networkx", version = "3.4.2", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11'" },
751	- { name = "networkx", version = "3.6.1", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	789	+ { name = "networkx", version = "3.6.1", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11'" },
752	- { name = "setuptools", marker = "python_full_version >= '3.12' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	790	+ { name = "setuptools", marker = "python_full_version >= '3.12'" },
753	- { name = "sympy", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	791	+ { name = "sympy" },
754	- { name = "typing-extensions", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	792	+ { name = "typing-extensions" },
755	]	793	]
756	wheels = [	794	wheels = [
757	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/0c/1a/c61f36cfd446170ec27b3a4984f072fd06dab6b5d7ce27e11adb35d6c838/torch-2.10.0-cp310-cp310-manylinux_2_28_aarch64.whl", hash = "sha256:5276fa790a666ee8becaffff8acb711922252521b28fbce5db7db5cf9cb2026d" },	795	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/0c/1a/c61f36cfd446170ec27b3a4984f072fd06dab6b5d7ce27e11adb35d6c838/torch-2.10.0-cp310-cp310-manylinux_2_28_aarch64.whl", hash = "sha256:5276fa790a666ee8becaffff8acb711922252521b28fbce5db7db5cf9cb2026d" },
	@@ -765,16 +803,16 @@ wheels = [
765		803
766	[[package]]	804	[[package]]
767	name = "torch-npu"	805	name = "torch-npu"
768	-version = "2.10.0"	806	+version = "2.10.0.post4"
769	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	807	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
770	dependencies = [	808	dependencies = [
771	- { name = "torch", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	809	+ { name = "torch" },
772	]	810	]
773	wheels = [	811	wheels = [
774	- { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/f5/2d/b688ca03ea2ba7472b61178bef96288d78be316d0b644037c735fb7eb82c/torch_npu-2.10.0-cp310-cp310-manylinux_2_28_aarch64.whl", hash = "sha256:274f22a3000c89cad0e83ac487158104a51f26c422a296a3b29601747af40674" },	812	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/ab/c8/630dbe2af14d469aab781a62a1ebb6944b11309b79ed0788a08b0f2a2541/torch_npu-2.10.0.post4-cp310-cp310-manylinux_2_28_aarch64.whl", hash = "sha256:8196169412a7f7be6926a765e0f70e2e633d7791d0ccad94a96bd3d314409eec" },
775	- { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/6d/d8/482baf4f6e02264333d033b32702e41d5f4f88a538cc882fe53535e6ef43/torch_npu-2.10.0-cp311-cp311-manylinux_2_28_aarch64.whl", hash = "sha256:07e9d39a77577873c8a1a2d6741129d15d6b7a54d2c07a1cc3a294242689fea7" },	813	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/f0/0f/f43a0847950643357a181097c9c2a06af5ac56eb694bd0e4415c3013e3ec/torch_npu-2.10.0.post4-cp311-cp311-manylinux_2_28_aarch64.whl", hash = "sha256:624ba08fb0259fcb8315a4b5bb5d7edd2d2ca927ba368c800b7f18771564e153" },
776	- { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/b5/03/1160d86b8db5e4d548fd3b84494e1b85cde839b40cd50479bd37fda88bca/torch_npu-2.10.0-cp312-cp312-manylinux_2_28_aarch64.whl", hash = "sha256:93eef95dea5c089b6c59f30d680689b936ee8b6d7a2a73575abcb66764866b52" },	814	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/64/8d/3d10b7852b4e7f1392d6b68457537d3e4cdd8be04dcdaae83c14344b571b/torch_npu-2.10.0.post4-cp312-cp312-manylinux_2_28_aarch64.whl", hash = "sha256:5cee8b07d98b2188297916342fc587228bfca5703ffa8f48be1a69373414aa44" },
777	- { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/bc/bd/d10e3b74e35e0b6a20f97d886d8d520a0f7f8f136f38b3c48d738696fda9/torch_npu-2.10.0-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:81610da863aa80b1ccb3cece8fc6c0e85f5ea772ca7ffea5878bc5884e3cfaec" },	815	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/aa/8a/525206571e3a0f9a36363ae55a424b34bac790c8ce10129051e7e8336be6/torch_npu-2.10.0.post4-cp313-cp313-manylinux_2_28_aarch64.whl", hash = "sha256:2d88ce46c69cfa562453925865805ca8c358cea31176ff9b284e7851eda213d0" },
778	]	816	]
779		817
780	[[package]]	818	[[package]]
	@@ -782,10 +820,10 @@ name = "torchvision"
782	version = "0.25.0"	820	version = "0.25.0"
783	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }	821	source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
784	dependencies = [	822	dependencies = [
785	- { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	823	+ { name = "numpy", version = "2.2.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version < '3.11'" },
786	- { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11' and platform_machine == 'aarch64' and sys_platform == 'linux'" },	824	+ { name = "numpy", version = "2.4.6", source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }, marker = "python_full_version >= '3.11'" },
787	- { name = "pillow", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	825	+ { name = "pillow" },
788	- { name = "torch", marker = "platform_machine == 'aarch64' and sys_platform == 'linux'" },	826	+ { name = "torch" },
789	]	827	]
790	wheels = [	828	wheels = [
791	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/64/68/dc7a224f606d53ea09f9a85196a3921ec3a801b0b1d17e84c73392f0c029/torchvision-0.25.0-cp310-cp310-manylinux_2_28_aarch64.whl", hash = "sha256:acc339aba4a858192998c2b91f635827e40d9c469d9cf1455bafdda6e4c28ea4" },	829	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/64/68/dc7a224f606d53ea09f9a85196a3921ec3a801b0b1d17e84c73392f0c029/torchvision-0.25.0-cp310-cp310-manylinux_2_28_aarch64.whl", hash = "sha256:acc339aba4a858192998c2b91f635827e40d9c469d9cf1455bafdda6e4c28ea4" },
	@@ -824,3 +862,12 @@ sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/ba/19/
824	wheels = [	862	wheels = [
825	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/ce/e4/dccd7f47c4b64213ac01ef921a1337ee6e30e8c6466046018326977efd95/tzdata-2026.2-py2.py3-none-any.whl", hash = "sha256:bbe9af844f658da81a5f95019480da3a89415801f6cc966806612cc7169bffe7" },	863	{ url = "https://mirrors.huaweicloud.com/repository/pypi/packages/ce/e4/dccd7f47c4b64213ac01ef921a1337ee6e30e8c6466046018326977efd95/tzdata-2026.2-py2.py3-none-any.whl", hash = "sha256:bbe9af844f658da81a5f95019480da3a89415801f6cc966806612cc7169bffe7" },
826	]	864	]
		865	+
		866	+[[package]]
		867	+name = "zipp"
		868	+version = "4.1.0"
		869	+source = { registry = "https://mirrors.huaweicloud.com/repository/pypi/simple" }
		870	+sdist = { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/b9/d8/eab98a517c14134c0b2eb4e2387bc5f457334293ec5d2dd3857ec2966802/zipp-4.1.0.tar.gz", hash = "sha256:4cb57381f544315db7688e976e922a2b18cdb513d21cc194eb42232ba2a3e602" }
		871	+wheels = [
		872	+ { url = "https://mirrors.huaweicloud.com/repository/pypi/packages/3a/13/547360d81e6d88d58492968ffda9f9542854f11310ee556fef14260cc886/zipp-4.1.0-py3-none-any.whl", hash = "sha256:25ad4e16390cd314347dd8f1de67a2ac538ae658ed4ab9db16029c07c188e97f" },
		873	+]