Merged
[代码侦探(第十三期)] 个人开发者 - exercises #5638
[代码侦探(第十三期)] 个人开发者 - exercises #5638
Merged
weixin_196253Add on 11 days ago
weixin_196253
weixin_196253
11 days ago

个人开发者

团队信息

  • 提交者: Code_demo111111 (2778116881@qq.com)
  • 身份: 企业员工
  • 单位: 个人开发者

成员

算子: exercises

本算子基于Ascend C多核架构实现LeakyReLU激活计算:Host侧完成输入切分与斜率属性解析,经TilingData传递给Kernel;Kernel侧各核独立处理数据分片,采用双缓冲流水搬运,正负区间分段计算(正数直通、负数乘以斜率),支持half与float两种精度。

likedislike
Pull Request has been successfully merged by CANN-robot.
(Thank you for weixin_196253's contribution.)
weixin_196253weixin_196253
11 days ago Created pull request, commit bce7e050
atomgit-bot
atomgit-bot
11 days ago Comments:

变更摘要

本 PR 为 exercises 目录新增一套基于 Ascend C 的 Leakyrelu 自定义算子工程:Host 侧完成算子注册、形状推导与多核/UB 切分 Tiling,并通过 LeakyreluTilingData 把切分参数与 negative_slope 属性下发到 Kernel;Kernel 侧按 tilingKey 分派 half/float 两种模板实例,采用双缓冲流水搬运与正负区间分段计算。同时补齐了构建脚本、aclnn 调用示例、精度比对样例数据以及 Host/Kernel 的 UT 框架。

主要改动

  • 算子定义与形状推导: 新增 Leakyrelu 算子注册(op_host/leakyrelu_def.cpp),输入 x、输出 y 支持 DT_FLOAT 与 DT_FLOAT16、FORMAT_ND,并声明 Float 类型属性 negative_slope 及 ascend910b 配置;leakyrelu_infershape.cpp 中以输入 shape 直接推导输出 shape。
  • Tiling 与属性下发: op_host/leakyrelu_tiling.cpp 读取平台 coreNum/ubSize,按 32B 对齐与 MIN_SPLIT_THRESHOLD 做多核切分、按输入/输出双缓冲加 float 中间缓冲估算 UB 容量,向 LeakyreluTilingData 写入 totalNum、blockFactor、ubFactor、negativeSlope、slopeTag,并依据 dtype 设置 tilingKey(half→LEAKYRELU_TPL_SCH_MODE_0、float→LEAKYRELU_TPL_SCH_MODE_1);GetNegativeSlope 在属性缺失时回退默认值。
  • Kernel 实现: 新增模板类 NsLeakyrelu::Leakyrelu<T>(op_kernel/leakyrelu.h),使用 TQue 双缓冲 DataCopy 搬运、按 ubLength_ 分块循环,计算统一在 float 域完成(Relu/Sub/Muls/Add),half 分支经 Cast 升/降精度,尾块按对齐长度搬入但只写回有效元素;op_kernel/leakyrelu.cpp 为 __global__ __aicore__ 入口,用 if constexpr 按 schMode 实例化 half/float 两种 kernel。
  • TilingData 与模板参数定义: 新增公共结构 LeakyreluTilingData(含 LEAKYRELU_DEFAULT_SLOPE 与 LEAKYRELU_SLOPE_TAG 标记,用于兼容未下发属性的场景)与 leakyrelu_tiling_key.h 中的 ASCENDC_TPL_ARGS_DECL/ASCENDC_TPL_SEL 模板声明,供 Host tiling 与 Kernel 共用。
  • 构建、示例与测试配套: 新增 build.sh(支持 -j、--make_clean、-u、-e,含源码指纹校验与产物检查)、examples/run.sh 配合 test_aclnn_leakyrelu.cpp/sample_support.h 走 aclnn 接口调用、samples/case.json+reference.py+sample.py 生成与校验 golden 数据,以及 tests/ut 下的 TilingContextFaker/InfershapeContextFaker 上下文构造器、ExecuteTestCase 断言工具、Host tiling 用例与 CPU 侧 kernel UT。
likedislike
Incorrect?
atomgit-bot
atomgit-bot
11 days ago Comments:

代码审查

审查结论

  • [建议] 2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/examples/sample_support.h:44 fix: Tensor 构造函数在 aclrtMalloc 之后抛异常时泄漏 device 显存
  • [建议] 2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_host/leakyrelu_infershape.cpp:25 fix: InferShape 在输入 shape 为空时仍返回 GRAPH_SUCCESS,输出 shape 未被设置
  • [建议] 2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_kernel/leakyrelu.h:165 fix: 尾块使用基础 DataCopy 搬运非 32B 对齐长度,可能越界写输出张量
  • [建议] 2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_kernel/leakyrelu.h:117 fix: CopyIn 按 AlignUp 长度搬入,末核会越过输入张量末尾读取
  • [建议] 2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_kernel/leakyrelu.h:67 fix: slopeTag 门控导致属性未下发时静默使用默认 slope
  • [建议] 2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/tests/ut/op_host/CMakeLists.txt:4 fix: SOC_VERSION 默认值大小写与 socToUpper 表键不匹配导致 SoC 版本被解析为空
类型 数量
🔴 阻塞 0
🟡 建议 6

💬 仅评论

likedislike
Incorrect?
weixin_196253
weixin_196253
11 days ago Comments:

/compile

likedislike
CANN-robotCANN-robotCollaborators
11 days ago Added label: cann-cla/yes
CANN-robot
CANN-robotCollaborators
11 days ago Comments:

Thanks for your pull-request.
The full list of commands accepted by me can be found at here.
You can get sig-info at here.
You can self-configure the PR merge rules for this repository. For more details, please refer to Here.
For more, you also can visit HICANN.


PR Approval Progress

✅ Congratulations! All modules have met the lgtm and approve requirements.

Module Approval Details

module lgtm status approve status
repo-cann/cann-outreach ✅ 傅涛, shaoyf (2/2) ✅ shaoyf, 傅涛 (2/1)

💡 Tip:

  • Committer can comment /approve or /lgtm
  • Commenting /approve implies both code review (lgtm) and intent to merge (approve)

CLA Signature Pass

Code_demo111111, thanks for your pull request. All authors of the commits have signed the CLA. 👍

likedislike
CANN-robotCANN-robotCollaborators
11 days ago Set yanhf,jxlang,shaoyf,TianXL,yanyawen,fullt,gcw_tgPdOLZT,Carolina_yuan,luzx66,cherry_03,li-shengxian3 as approver
CANN-robotCANN-robotCollaborators
11 days ago Set yanhf,jxlang,shaoyf,TianXL,yanyawen,fullt,gcw_tgPdOLZT,Carolina_yuan,luzx66,cherry_03,li-shengxian3 as approver
atomgit-bot
atomgit-bot11 days agoStart code review1
2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_kernel/leakyrelu.h
@@ -0,0 +65,4 @@
65+ alignElems_ = BLOCK_BYTES / static_cast<int64_t>(sizeof(T));
66+ // 兼容只填写了前三个字段的 CPU kernel UT fixture(未下发属性时使用默认 slope)
67+ negativeSlope_ = (tilingData->slopeTag == LEAKYRELU_SLOPE_TAG) ? tilingData->negativeSlope
68+ : LEAKYRELU_DEFAULT_SLOPE;
atomgit-bot
atomgit-bot11 days agoComments:

🟡 Medium Priority

变更行(leakyrelu.h:67-68):negativeSlope_ = (tilingData->slopeTag == LEAKYRELU_SLOPE_TAG) ? tilingData->negativeSlope : LEAKYRELU_DEFAULT_SLOPE;

  • 触发条件:host tiling 只要没有把 slopeTag 填为 LEAKYRELU_SLOPE_TAG(字段顺序/结构体版本不一致、属性解析遗漏、新增字段未同步初始化等),kernel 就会静默回退到硬编码 0.01。
likedislike
Incorrect?
atomgit-bot
atomgit-bot11 days agoStart code review1
2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_kernel/leakyrelu.h
@@ -0,0 +115,4 @@
115+ const int64_t offset = progress * ubLength_;
116+ // 按 32B 对齐长度搬入;尾部多读的元素只参与计算,不会被写回 GM
117+ const int64_t copyNum = AlignUp(currentNum, alignElems_);
118+ DataCopy(xLocal, inputGMX[offset], static_cast<int32_t>(copyNum));
atomgit-bot
atomgit-bot11 days agoComments:

🟡 Medium Priority

变更行(leakyrelu.h:117-118):const int64_t copyNum = AlignUp(currentNum, alignElems_); DataCopy(xLocal, inputGMX[offset], static_cast<int32_t>(copyNum));

  • 触发条件:totalNum 不是 alignElems_(float 8 / half 16)的整数倍时,最后一轮 tail 的 copyNum 会向上取整到 32B。
  • 失败模式:MTE2 会读到输入张量末尾之后最多 31B(half 为 30B)未分配的 GM,越界读;在开启越界检查的环境(仿真/UT/部分硬件校验)会报 AIC Error 或读到脏数据参与计算(虽然结果不写回,但可能污染生成 NaN/Inf 而影响 Add 的整块向量计算)。

建议:对非对齐尾块使用 DataCopyPad 按 currentNum*sizeof(T) 实际字节数搬入,或确保 host tiling 下发的 totalNum 已 32B 对齐,避免越界读。

likedislike
Incorrect?
atomgit-bot
atomgit-bot11 days agoStart code review1
2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_host/leakyrelu_infershape.cpp
@@ -0,0 +27,4 @@
27+ }
28+ if (in_shape != nullptr) {
29+ *output_shape = *in_shape;
30+ }
atomgit-bot
atomgit-bot11 days agoComments:

🟡 Medium Priority

变更行:leakyrelu_infershape.cpp 第 25-32 行,if (in_shape != nullptr) { *output_shape = *in_shape; } 之后无条件 return ge::GRAPH_SUCCESS;。

契约/行为:Leakyrelu 只有 1 个必选输入,InferShape 的正常契约是「输出 shape = 输入 shape」;当 context->GetInputShape(0) 返回 nullptr(输入未找到、可选输入/子图切分边界、部分动态 shape 场景)时,本实现既不设置 *output_shape,也不报错,直接返回成功。

失效模式:框架把未被写入(rank/dims 处于初始/未知状态)的输出 Shape 当作合法结果继续下传,后续算子按错误的 rank/维度做 tiling 与内存分配,可能计算出错误的输出尺寸或触发越界读写;GetOutputShape(i) 的 nullptr 已经返回 GRAPH_FAILED,而更关键的输入侧缺失却被静默放过,属于错误处理不一致。

Suggestions
30
+ if (in_shape == nullptr) {
31
+ return ge::GRAPH_FAILED;
30
- }
32
+ }
33
+ *output_shape = *in_shape;
Apply suggestion
likedislike
Incorrect?
atomgit-bot
atomgit-bot11 days agoStart code review1
2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/op_kernel/leakyrelu.h
@@ -0,0 +162,4 @@
162+ LocalTensor<T> yLocal = outputQueueY.DeQue<T>();
163+ const int64_t offset = progress * ubLength_;
164+ // 只写回有效元素,避免越界污染输出张量尾部
165+ DataCopy(outputGMY[offset], yLocal, static_cast<int32_t>(currentNum));
atomgit-bot
atomgit-bot11 days agoComments:

🟡 Medium Priority

变更行(leakyrelu.h:165):DataCopy(outputGMY[offset], yLocal, static_cast<int32_t>(currentNum));

  • 契约:基础 DataCopy(UB→GM,MTE3)要求搬运数据量为 32B 的整数倍;currentNum 在尾块由 blockLength_ - progress * ubLength_ 得到,当 totalNum 不是 alignElems_(float 8 个元素 / half 16 个元素)的整数倍时必然非对齐。
  • 失败模式:MTE3 按整块搬运时会把 32B 块尾部的冗余数据写到 outputGMY[offset+currentNum] 之后的 GM,踩坏输出张量尾部或相邻 tensor 数据;在开启越界检测时(kernel UT / 仿真)直接报 AIC Error。注释“只写回有效元素,避免越界污染输出张量尾部”的意图正确,但基础 DataCopy 无法保证,非对齐尾块必须用 DataCopyPad。

建议:尾块改 DataCopyPad 按实际字节数写回,或由 host tiling 保证 totalNum 32B 对齐后再用 DataCopy;同时 CopyOut 与 CopyIn 的对齐策略需保持一致。

likedislike
Incorrect?
atomgit-bot
atomgit-bot11 days agoStart code review1
2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/examples/sample_support.h
@@ -0,0 +50,4 @@
50+ tensor = aclCreateTensor(shape.data(), shape.size(), type, strides.data(), 0, ACL_FORMAT_ND,
51+ shape.data(), shape.size(), device);
52+ if (!tensor)
53+ throw std::runtime_error("tensor creation failed");
atomgit-bot
atomgit-bot11 days agoComments:

🟡 Medium Priority

变更行(sample_support.h:44-53):check(aclrtMalloc(&device, ...)) 成功分配 device 显存后,后续两步仍可能抛异常——check(aclrtMemcpy(...))(第 46 行)与 if (!tensor) throw(第 52-53 行)。
失败模式:C++ 规定构造函数抛出异常时该对象的析构函数不会执行(成员 host/file 会被析构,但 ~Tensor() 不会),因此已分配的 device GM 显存无人释放;同理 host 之外的 aclTensor 无需释放,但 device 一定会泄漏。
触发条件:aclrtMemcpy 返回非 0(如设备侧内存不足、非法拷贝参数)或 aclCreateTensor 返回 nullptr(strides/shape 非法、内存不足)。本 helper 被每个 Tensor 复用,一旦出现多次失败会累积泄漏。

Suggestions
53
+ check(aclrtMalloc(&device, std::max(size_t(1), size), ACL_MEM_MALLOC_HUGE_FIRST));
54
+ try {
55
+ if (size)
56
+ check(aclrtMemcpy(device, size, host.data(), size, ACL_MEMCPY_HOST_TO_DEVICE));
57
+ std::vector<int64_t> strides(shape.size(), 1);
58
+ for (size_t i = shape.size(); i > 1; --i)
59
+ strides[i - 2] = strides[i - 1] * shape[i - 1];
60
+ tensor = aclCreateTensor(shape.data(), shape.size(), type, strides.data(), 0, ACL_FORMAT_ND,
61
+ shape.data(), shape.size(), device);
62
+ if (!tensor)
53
- throw std::runtime_error("tensor creation failed");
63
+ throw std::runtime_error("tensor creation failed");
64
+ } catch (...) {
65
+ aclrtFree(device);
66
+ device = nullptr;
67
+ throw;
68
+ }
Apply suggestion
likedislike
Incorrect?
atomgit-bot
atomgit-bot11 days agoStart code review1
2026/CANN-Code-Detective/Challenge13-LeakyReluCustom/PR_code/personal_Code_demo111111_11/code/exercises/tests/ut/op_host/CMakeLists.txt
@@ -0,0 +3,4 @@
3+ 
4+if(NOT DEFINED SOC_VERSION)
5+ set(SOC_VERSION "Ascend910B")
6+endif()
atomgit-bot
atomgit-bot11 days agoComments:

🟡 Medium Priority

变更行:op_host/CMakeLists.txt:4-6 设置 SOC_VERSION "Ascend910B",第 39-41 行以 BUILD_SOC_VERSION=${SOC_VERSION} 下发宏,tiling_case_executor.cpp:125 用 STR(BUILD_SOC_VERSION) 得到字符串 "Ascend910B"。

影响链路:tiling_case_executor.cpp:118-124 的 socToUpper 表键全部是小写("ascend910b"→"Ascend910B"、"ascend910_93" 等),第 126-127 行用 socToUpper[buildSocVersion] 查 "Ascend910B" 必然 miss;由于用的是 map::operator[],miss 时不是报错而是插入并返回空串,于是 buildSocVersion 变成 ""。

失败模式:run.sh 不传 -DSOC_VERSION,因此恒走该默认值。随后(1)第 144 行 socToArch[""] 再插入空值,socversions = {{"NpuArch",""},{"Short_SoC_version",""}} 被 SetPlatformRes("version", ...) 写入平台信息;(2)compileInfoString 结尾拼成 "socVersion":""。任何依赖 SoC 版本/NpuArch 做分支的 tiling(如按架构选择 UB 切分或特性开关)会取到空字符串走默认/错误分支,而测试仍会“通过”,把平台配置错误静默带过,属于 UT 侧算出的期望值不可信的可靠性问题。修复方向:默认值改为小写 "ascend910b"(或用 socToUpper.find + 大小写无关比较,miss 时直接报错)。

建议:将默认 SOC_VERSION 改为与 tiling_case_executor.cpp 中 socToUpper 键一致的小写形式("ascend910b"),或在该处统一转小写后再查表;同时确认 BUILD_SOC_VERSION 宏最终能命中 socToUpper 与 socToArch 两张表。

Suggestions
6
+ if(NOT DEFINED SOC_VERSION)
7
+ set(SOC_VERSION "ascend910b")
6
8
  endif()
Apply suggestion
likedislike
Incorrect?
shaoyf
shaoyfCollaborators
8 days ago Comments:

/approve
/lgtm

likedislike
fulltower
fulltowerCollaborators
8 days ago Comments:

/approve
/lgtm

likedislike
CANN-robotCANN-robotCollaborators
8 days ago Added label: lgtmapproved
CANN-robot
CANN-robotCollaborators
8 days ago Comments:

The MR can not be merged, because of CodeReview discussion not resolved

If you want to solve this problem, you can click here to do it in the FAQs.

likedislike
fulltowerfulltowerCollaborators
8 days ago Resolved final issue
fulltower
fulltowerCollaborators
8 days ago Comments:

/check-pr

likedislike
CANN-robotCANN-robotCollaborators
8 days ago Merged pull request