| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
docs: ABI: convert testing/configfs-acpi to ReST There are some problems with this file when a ReST content is produced. Fix it. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/f56daf94b80f1051438e8c787ba04552adb66e67.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: typo fixes in Documentation/ABI/ Fix the following typos in the Documentation/ABI/ directory: - In file obsolete/sysfs-cpuidle, change "obselete" for "obsolete". - In file removed/sysfs-kernel-uids, change "propotional" for "proportional". - In directory stable/, fix the following words: "associtated" for "associated", "hexidecimal" for "hexadecimal", "vlue" for "value", "csed" for "caused" and "wrtie" for "write". This updates a total of five files. - In directory testing/, fix the following words: "subystem" for "subsystem", "isochrnous" for "isochronous", "Desctiptors" for "Descriptors", "picutre" for "picture", "capture" for "capture", "occured" for "ocurred", "connnected" for "connected","agressively" for "aggressively","manufacturee" for "manufacturer" and "transaction" for "transaction", "malformatted" for "incorrectly formated" ,"internel" for "internal", "writtento" for "written to", "specificed" for "specified", "beyound" for "beyond", "Symetric" for "Symmetric". This updates a total of eleven files. Signed-off-by: Carlos Bilbao <bilbao@vt.edu> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5710038.lOV4Wx5bFT@iron-maiden Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs: typo fixes in Documentation/ABI/ Fix the following typos in the Documentation/ABI/ directory: - In file obsolete/sysfs-cpuidle, change "obselete" for "obsolete". - In file removed/sysfs-kernel-uids, change "propotional" for "proportional". - In directory stable/, fix the following words: "associtated" for "associated", "hexidecimal" for "hexadecimal", "vlue" for "value", "csed" for "caused" and "wrtie" for "write". This updates a total of five files. - In directory testing/, fix the following words: "subystem" for "subsystem", "isochrnous" for "isochronous", "Desctiptors" for "Descriptors", "picutre" for "picture", "capture" for "capture", "occured" for "ocurred", "connnected" for "connected","agressively" for "aggressively","manufacturee" for "manufacturer" and "transaction" for "transaction", "malformatted" for "incorrectly formated" ,"internel" for "internal", "writtento" for "written to", "specificed" for "specified", "beyound" for "beyond", "Symetric" for "Symmetric". This updates a total of eleven files. Signed-off-by: Carlos Bilbao <bilbao@vt.edu> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5710038.lOV4Wx5bFT@iron-maiden Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
IB/cma: Add default RoCE TOS to CMA configfs Add new entry to the RDMA-CM configfs that allows users to select default TOS for RDMA-CM QPs. This is useful for users that want to control the TOS for legacy applications without changing their code. Application that sets the TOS explicitly using the rdma_set_option API will continue to work as expected, meaning overriding the configfs value. CC: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> | 9 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
stm class: Introduce an abstraction for System Trace Module devices A System Trace Module (STM) is a device exporting data in System Trace Protocol (STP) format as defined by MIPI STP standards. Examples of such devices are Intel(R) Trace Hub and Coresight STM. This abstraction provides a unified interface for software trace sources to send their data over an STM device to a debug host. In order to do that, such a trace source needs to be assigned a pair of master/channel identifiers that all the data from this source will be tagged with. The STP decoder on the debug host side will use these master/channel tags to distinguish different trace streams from one another inside one STP stream. This abstraction provides a configfs-based policy management mechanism for dynamic allocation of these master/channel pairs based on trace source-supplied string identifier. It has the flexibility of being defined at runtime and at the same time (provided that the policy definition is aligned with the decoding end) consistency. For userspace trace sources, this abstraction provides write()-based and mmap()-based (if the underlying stm device allows this) output mechanism. For kernel-side trace sources, we provide "stm_source" device class that can be connected to an stm device at run time. Cc: linux-api@vger.kernel.org Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 10 年前 | |
stm class: p_sys-t: Document the configfs interface This adds ABI documentation for the new configfs attributes that come with the MIPI SyS-T protocol driver. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
usb: gadget: add WebUSB landing page support There is a custom (non-USB IF) extension to the USB standard: https://wicg.github.io/webusb/ This specification is published under the W3C Community Contributor Agreement, which in particular allows to implement the specification without any royalties. The specification allows USB gadgets to announce an URL to landing page and describes a Javascript interface for websites to interact with the USB gadget, if the user allows it. It is currently supported by Chromium-based browsers, such as Chrome, Edge and Opera on all major operating systems including Linux. This patch adds optional support for Linux-based USB gadgets wishing to expose such a landing page. During device enumeration, a host recognizes that the announced USB version is at least 2.01, which means, that there are BOS descriptors available. The device than announces WebUSB support using a platform device capability. This includes a vendor code under which the landing page URL can be retrieved using a vendor-specific request. Previously, the BOS descriptors would unconditionally include an LPM related descriptor, as BOS descriptors were only ever sent when the device was LPM capable. As this is no longer the case, this patch puts this descriptor behind a lpm_capable condition. Usage is modeled after os_desc descriptors: echo 1 > webusb/use echo "https://www.kernel.org" > webusb/landingPage lsusb will report the device with the following lines: Platform Device Capability: bLength 24 bDescriptorType 16 bDevCapabilityType 5 bReserved 0 PlatformCapabilityUUID {3408b638-09a9-47a0-8bfd-a0768815b665} WebUSB: bcdVersion 1.00 bVendorCode 0 iLandingPage 1 https://www.kernel.org Signed-off-by: Jó Ágila Bitsch <jgilab@gmail.com> Link: https://lore.kernel.org/r/Y8Crf8P2qAWuuk/F@jo-einhundert Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 年前 | |
docs: ABI: Drop trailing whitespace Remove all trailing whitespace from the ABI documentation. Most of it was introduced during recent updates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110144033.3278499-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
USB: docs: fixed table margin in configfs-usb-gadget-mass-storage After merging forced_eject patch, there was a broken margin in the configfs parameters table in the ABI documentation. This patch fixes it. Fixes: 421c8d9a20da ("usb: gadget: f_mass_storage: forced_eject attribute") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20220723101432.72178-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
usb: gadget: midi2: More flexible MIDI 1.0 configuration This patch allows users to set up MIDI 1.0 ports more flexibly. Namely, instead of the fixed mapping only from FB 0, now multiple block definitions are applied to build up the MIDI 1.0 mapping. The each block config has midi1_first_group and midi1_num_groups attributes, and those specify which Groups are used for MIDI 1.0. Those fields must be within the UMP Groups defined in the block itself. Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20230725062206.9674-8-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 年前 | |
Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 年前 | |
Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: fix multiple typo occurences s/KenelVersion/KernelVersion/ Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Greg KH <greg@kroah.com> Acked-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 12 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
usb: gadget: f_tcm: add configfs support Allow using the tcm function as a component of a gadget composed with ConfigFS. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> | 10 年前 | |
usb: gadget: f_uac1: allow changing interface name via configfs This adds "function_name" configfs entry to change string value of the iInterface field. This field will be shown in Windows' audio settings panel, so being able to change it is useful. It will default to "AC Interface" just as before if unchanged. Signed-off-by: Yunhao Tian <t123yh.xyz@gmail.com> Link: https://lore.kernel.org/r/20220122112446.1415547-1-t123yh.xyz@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
usb: gadget: function: make current f_uac1 implementation legacy Before introducing new f_uac1 function (with virtual ALSA card) make current implementation legacy. This includes renaming of existing files, some variables, config options and documentation Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> | 9 年前 | |
usb: gadget: f_uac2: Optionally determine bInterval for HS and SS Allow setting configfs params p_hs_bint/c_hs_bint to 0. If they are set to 0, determine the largest bInterval (4 to 1) for which the required bandwidth of the max samplerate fits the max allowed packet size. If the required bandwidth exceeds max bandwidth for single-packet mode (ep->mc=1), keep bInterval at 1. The FS speed is left at fixed bInterval=1. If for any speed the required bandwidth exceeds the max bandwidth corresponding to the selected/determined bInterval, print a warning. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20220127114331.41367-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
usb: gadget: uvc: Make bmControls attr read/write For the Processing Unit and Camera Terminal descriptors defined in the UVC Gadget we currently hard-code values into their bmControls fields, which enumerates which controls the gadget is able to support. This isn't appropriate since only the userspace companion program to the kernel driver will know which controls are supported. Make the configfs attributes that point to those fields read/write so userspace can set them to appropriate values. Document the new behaviour at the same time so the functionality is clear. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Link: https://lore.kernel.org/r/20230309105825.216745-1-dan.scally@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
platform/chrome: cros_ec: Expose suspend_timeout_ms in debugfs In modern Chromebooks, the embedded controller has a mechanism where it will watch a hardware-controlled line that toggles in suspend, and wake the system up if an expected sleep transition didn't occur. This can be very useful for detecting power management issues where the system appears to suspend, but doesn't actually reach its lowest expected power states. Sometimes it's useful in debug and test scenarios to be able to control the duration of that timeout, or even disable the EC timeout mechanism altogether. Add a debugfs control to set the timeout to values other than the EC-defined default, for more convenient debug and development iteration. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Link: https://lore.kernel.org/r/20220822144026.v3.1.Idd188ff3f9caddebc17ac357a13005f93333c21f@changeid [tzungbi: fix one nit in Documentation/ABI/testing/debugfs-cros-ec.] Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> | 3 年前 | |
cxl/mem: Add debugfs attributes for poison inject and clear Inject and Clear Poison commands are optionally supported by CXL memdev devices and are intended for use in debug environments only. Add debugfs attributes for user access. Documentation/ABI/testing/debugfs-cxl describes the usage. Signed-off-by: Alison Schofield <alison.schofield@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/0c9ea8e671b8e58465d18722788b60d325c675c7.1681874357.git.alison.schofield@intel.com Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> | 3 年前 | |
platform/x86: dell-ddv: Update ABI documentation Synchronize the ABI documentation with the driver documentation and direct users to the latter in case the search for more detailed information. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230508204241.11076-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
soc: qcom: dcc: rewrite description of dcc sysfs files The description of dcc sysfs files is somewhat confusing and not effective. Rewrite it to be clear. While at it, also use literal code block for config sysfs examples and remove redundant examples that are obvious. Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221230135030.17002-3-bagasdotme@gmail.com | 3 年前 | |
docs: typo fixes in Documentation/ABI/ Fix the following typos in the Documentation/ABI/ directory: - In file obsolete/sysfs-cpuidle, change "obselete" for "obsolete". - In file removed/sysfs-kernel-uids, change "propotional" for "proportional". - In directory stable/, fix the following words: "associtated" for "associated", "hexidecimal" for "hexadecimal", "vlue" for "value", "csed" for "caused" and "wrtie" for "write". This updates a total of five files. - In directory testing/, fix the following words: "subystem" for "subsystem", "isochrnous" for "isochronous", "Desctiptors" for "Descriptors", "picutre" for "picture", "capture" for "capture", "occured" for "ocurred", "connnected" for "connected","agressively" for "aggressively","manufacturee" for "manufacturer" and "transaction" for "transaction", "malformatted" for "incorrectly formated" ,"internel" for "internal", "writtento" for "written to", "specificed" for "specified", "beyound" for "beyond", "Symetric" for "Symmetric". This updates a total of eleven files. Signed-off-by: Carlos Bilbao <bilbao@vt.edu> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5710038.lOV4Wx5bFT@iron-maiden Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
crypto: qat - add heartbeat error simulator commit e2b67859ab6e ("crypto: qat - add heartbeat error simulator") upstream Add a mechanism that allows to inject a heartbeat error for testing purposes. A new attribute inject_error is added to debugfs for each QAT device. Upon a write on this attribute, the driver will inject an error on the device which can then be detected by the heartbeat feature. Errors are breaking the device functionality thus they require a device reset in order to be recovered. This functionality is not compiled by default, to enable it CRYPTO_DEV_QAT_ERROR_INJECTION must be set. Intel-SIG: commit e2b67859ab6e ("crypto: qat - add heartbeat error simulator)" Backport to support Intel QAT in-tree driver Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Reviewed-by: Markas Rapoportas <markas.rapoportas@intel.com> Signed-off-by: Mun Chun Yep <mun.chun.yep@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ Aichun Shi: amend commit log ] Signed-off-by: Aichun Shi <aichun.shi@intel.com> | 1 年前 | |
crypto: qat - add support for ring pair level telemetry commit eb52707716e3 ("crypto: qat - add support for ring pair level telemetry") upstream Expose through debugfs ring pair telemetry data for QAT GEN4 devices. This allows to gather metrics about the PCIe channel and device TLB for a selected ring pair. It is possible to monitor maximum 4 ring pairs at the time per device. For details, refer to debugfs-driver-qat_telemetry in Documentation/ABI. This patch is based on earlier work done by Wojciech Ziemba. Intel-SIG: commit eb52707716e3 ("crypto: qat - add support for ring pair level telemetry)" Backport to support Intel QAT in-tree driver Signed-off-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ Aichun Shi: amend commit log ] Signed-off-by: Aichun Shi <aichun.shi@intel.com> | 1 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: update debugfs doc for Hisilicon HPRE Update documentation describing DebugFS that could help to check the change of register values. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 4 年前 | |
Documentation: update debugfs doc for Hisilicon SEC Update documentation describing DebugFS that could help to check the change of register values. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 4 年前 | |
Documentation: update debugfs doc for Hisilicon ZIP Update documentation describing DebugFS that could help to check the change of register values. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 4 年前 | |
drivers: hv: vmbus: Introduce latency testing Introduce user specified latency in the packet reception path By exposing the test parameters as part of the debugfs channel attributes. We will control the testing state via these attributes. Signed-off-by: Branden Bonaby <brandonbonaby94@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> | 6 年前 | |
ideapad: add debugfs support Add two nodes in debugfs which shows cfg value and its meaning, and status info read from VPC2004. Signed-off-by: Ike Panhc <ike.pan@canonical.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> | 14 年前 | |
treewide: change my e-mail address, fix my name Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
x86/olpc: Add debugfs interface for EC commands Add a debugfs interface for sending commands to the OLPC Embedded Controller (EC) and reading the responses. The EC provides functionality for machine identification, battery and AC control, wakeup control, etc. Having a debugfs interface available is useful for EC development and debugging. Based on code by Paul Fox (who also approves of the end result). Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Paul Fox <pgf@laptop.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andres Salomon <dilinger@queued.net> Link: http://lkml.kernel.org/r/20120327150740.667D09D401E@zog.reactivated.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 14 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Revert "pktcdvd: remove driver." This reverts commit f40eb99897af665f11858dd7b56edcb62c3f3c67. There are apparently still users out there of this driver. While we'd love to remove it to ease the maintenance burden, let's reinstate it for now until better (userspace) solutions can be developed. Link: https://lore.kernel.org/lkml/20230104190115.ceglfefco475ev6c@pali/ Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 3 年前 | |
firmware: arm_scmi: Add debugfs ABI documentation for common entries Add description of the debugfs SCMI common ABI. Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lore.kernel.org/r/20230118121426.492864-12-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> | 3 年前 | |
firmware: arm_scmi: Clarify raw per-channel ABI documentation Explain more in detail how the per-channel <m> identifier is chosen. Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Link: https://lore.kernel.org/r/20230120122326.1932614-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> | 3 年前 | |
doc: TPMI: Add debugfs documentation Describe fields in the TPMI debugfs folder. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230712225950.171326-4-srinivas.pandruvada@linux.intel.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
treewide: change my e-mail address, fix my name Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
platform/x86: Update Mario Limonciello's email address in the docs Various pdx86 docs under Documentation/ABI/testing still use Mario's old, now defunct, <mario.limonciello@dell.com> address. Update the docs to point to either the new Dell.Client.Kernel@dell.com email alias for Dell specific drivers, or to Mario's new @outlook.com address for other drivers. Cc: Dell.Client.Kernel@dell.com Cc: Mario Limonciello <mario.limonciello@outlook.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210810160900.106512-1-hdegoede@redhat.com | 4 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
mlxsw: documentation: Add resources ABI documentation Add resources ABI documentation. Signed-off-by: Arkadi Sharhsevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 8 年前 | |
ABI: evm: place a second what at the next line Originally, get_abi.pl was using spaces to separate What: parameters, but there are several references that declare things like: /sys/class/powercap/.../<power zone>/enabled So, the logic was changes in order to properly address it. That broke the second What added by Changeset 18e49b304633 ("ABI: security: fix location for evm and ima_policy"). As the only file that defines multiple What: at the same line is this file, let's move the second What: to a separate line. Fixes: 18e49b304633 ("ABI: security: fix location for evm and ima_policy") Fixes: ab9c14805b37 ("scripts: get_abi.pl: Better handle multiple What parameters") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1f1e29ccdc0dd0ec089a67b8a4e9650517c6137a.1632823172.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
integrity: Always reference the blacklist keyring with appraisal Commit 273df864cf746 ("ima: Check against blacklisted hashes for files with modsig") introduced an appraise_flag option for referencing the blacklist keyring. Any matching binary found on this keyring fails signature validation. This flag only works with module appended signatures. An important part of a PKI infrastructure is to have the ability to do revocation at a later time should a vulnerability be found. Expand the revocation flag usage to all appraisal functions. The flag is now enabled by default. Setting the flag with an IMA policy has been deprecated. Without a revocation capability like this in place, only authenticity can be maintained. With this change, integrity can now be achieved with digital signature based IMA appraisal. Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Reviewed-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> | 3 年前 | |
Documentation: Update documentation on ppc-memtrace Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 7 年前 | |
docs: ABI: ABI documentation for procfs attribute files used by multiple LSMs Provide basic ABI descriptions for the process attribute entries that are shared between multiple Linux security modules. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Link: https://lore.kernel.org/r/30c36660-3694-0c0d-d472-8f3b3ca4098e@schaufler-ca.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs: ABI: ABI documentation for procfs attribute files used by multiple LSMs Provide basic ABI descriptions for the process attribute entries that are shared between multiple Linux security modules. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Link: https://lore.kernel.org/r/30c36660-3694-0c0d-d472-8f3b3ca4098e@schaufler-ca.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs: ABI: ABI documentation for procfs attribute files used by multiple LSMs Provide basic ABI descriptions for the process attribute entries that are shared between multiple Linux security modules. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Link: https://lore.kernel.org/r/30c36660-3694-0c0d-d472-8f3b3ca4098e@schaufler-ca.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
mm/smaps: add Pss_Dirty Pss is the sum of the sizes of clean and dirty private pages, and the proportional sizes of clean and dirty shared pages: Private = Private_Dirty + Private_Clean Shared_Proportional = Shared_Dirty_Proportional + Shared_Clean_Proportional Pss = Private + Shared_Proportional The Shared*Proportional fields are not present in smaps, so it is not always possible to determine how much of the Pss is from dirty pages and how much is from clean pages. This information can be useful for measuring memory usage for the purpose of optimisation, since clean pages can usually be discarded by the kernel immediately while dirty pages cannot. The smaps routines in the kernel already have access to this data, so add a Pss_Dirty to show it to userspace. Pss_Clean is not added since it can be calculated from Pss and Pss_Dirty. Link: https://lkml.kernel.org/r/20220620081251.2928103-1-vincent.whitchurch@axis.com Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 4 年前 | |
ABI: pstore: Fix What field If both /sys/fs/pstore/... and /dev/pstore/... are possible, it should use, instead, two What: fields. Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/e19daafb779bd3a8f9ae1c15f670752355e5d40f.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
rtc: Document RTC_VL_READ and RTC_VL_CLR ioctls RTC_VL_READ and RTC_VL_CLR have been introduced in 2012 with commit 0f20b767e20a ("drivers/rtc/rtc-pcf8563.c: add RTC_VL_READ/RTC_VL_CLR ioctl feature") Document them now that they have been unified. Link: https://lore.kernel.org/r/20191214220259.621996-3-alexandre.belloni@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> | 6 年前 | |
virt: Add efi_secret module to expose confidential computing secrets The new efi_secret module exposes the confidential computing (coco) EFI secret area via securityfs interface. When the module is loaded (and securityfs is mounted, typically under /sys/kernel/security), a "secrets/coco" directory is created in securityfs. In it, a file is created for each secret entry. The name of each such file is the GUID of the secret entry, and its content is the secret data. This allows applications running in a confidential computing setting to read secrets provided by the guest owner via a secure secret injection mechanism (such as AMD SEV's LAUNCH_SECRET command). Removing (unlinking) files in the "secrets/coco" directory will zero out the secret in memory, and remove the filesystem entry. If the module is removed and loaded again, that secret will not appear in the filesystem. Signed-off-by: Dov Murik <dovmurik@linux.ibm.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://lore.kernel.org/r/20220412212127.154182-3-dovmurik@linux.ibm.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org> | 4 年前 | |
platform/x86/amd: pmc: Add sysfs files for SMU The CPU/APU SMU FW version and program is currently discoverable by turning on dynamic debugging or examining debugfs for the amdgpu driver. To make this more discoverable, create a dedicated sysfs file for it that userspace can parse without debugging enabled. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220914141850.259-1-mario.limonciello@amd.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF AMD PMF driver provides the flexibility to turn "on" or "off" CnQF feature (introduced in the earlier patch). Add corresponding ABI documentation for the new sysfs node and also update MAINTAINERS file with this new information Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20220922131202.56529-4-Shyam-sundar.S-k@amd.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files The {dma|pio}_mode sysfs files are incorrectly documented as having a list of the supported DMA/PIO transfer modes, while the corresponding fields of the *struct* ata_device hold the transfer mode IDs, not masks. To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs files are handled by the ata_bitfield_name_match() macro which leads to reading such kind of nonsense from them: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4, XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1, XFER_PIO_0 Using the correct ata_bitfield_name_search() macro fixes that: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_PIO_4 While fixing the file documentation, somewhat reword the {dma|pio}_mode file doc and add a note about being mostly useful for PATA devices to the xfer_mode file doc... Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> | 4 年前 | |
aoe: document sysfs interface Documentation has been compiled from git commit logs and descriptions in Documentation/aoe/aoe.txt. This should be useful for scripting and tracking changes in the ABI. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 8 年前 | |
bcache: A block layer cache Does writethrough and writeback caching, handles unclean shutdown, and has a bunch of other nifty features motivated by real world usage. See the wiki at http://bcache.evilpiepirate.org for more. Signed-off-by: Kent Overstreet <koverstreet@google.com> | 13 年前 | |
scsi: core: Allow enabling and disabling command duration limits Add the sysfs scsi_device attribute cdl_enable to allow a user to enable or disable a device command duration limits feature. CDL is disabled by default. This feature must be explicitly enabled by a user by setting the cdl_enable attribute to 1. The new function scsi_cdl_enable() does not do anything beside setting the cdl_enable field of struct scsi_device in the case of a (real) SCSI device (e.g. a SAS HDD). For ATA devices, the command duration limits feature needs to be enabled/disabled using the ATA feature sub-page of the control mode page. To do so, the scsi_cdl_enable() function checks if this mode page is supported using scsi_mode_sense(). If it is, scsi_mode_select() is used to enable and disable CDL. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Co-developed-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Link: https://lore.kernel.org/r/20230511011356.227789-10-nks@flawful.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 3 年前 | |
dm: add 'use_blk_mq' module param and expose in per-device ro sysfs attr Request-based DM's blk-mq support defaults to off; but a user can easily change the default using the dm_mod.use_blk_mq module/boot option. Also, you can check what mode a given request-based DM device is using with: cat /sys/block/dm-X/dm/use_blk_mq This change enabled further cleanup and reduced work (e.g. the md->io_pool and md->rq_pool isn't created if using blk-mq). Signed-off-by: Mike Snitzer <snitzer@redhat.com> | 11 年前 | |
block/loop: add documentation for sysfs interface Documentation has been compiled from git logs and by reading through code. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 8 年前 | |
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues describe how to set nr_poll_queues and enable the polling Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-15-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 5 年前 | |
mtip32xx: Remove 'registers' and 'flags' from sysfs This patch removes entries 'registers' and 'flags' from sysfs. Updated ABI file to reflect this change. Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 年前 | |
Docs/ABI/zram: document zram recompress sysfs knobs Document zram re-compression sysfs knobs. Link: https://lkml.kernel.org/r/20221115020314.386235-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ARM: 8256/1: driver coamba: add device binding path 'driver_override' As already demonstrated with PCI [1] and the platform bus [2], a driver_override property in sysfs can be used to bypass the id matching of a device to a AMBA driver. This can be used by VFIO to bind to any AMBA device requested by the user. [1] http://lists-archives.com/linux-kernel/28030441-pci-introduce-new-device-binding-path-using-pci_dev-driver_override.html [2] https://www.redhat.com/archives/libvir-list/2014-April/msg00382.html Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Reviewed-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 11 年前 | |
Documentation/ABI: correct possessive "its" typos Correct all uses of "it's" that are meant to be possessive "its". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220801025207.29971-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
cdx: add device attributes Create sysfs entry for CDX devices. Sysfs entries provided in each of the CDX device detected by the CDX controller - vendor id - device id - remove - reset of the device. - driver override Signed-off-by: Puneet Gupta <puneet.gupta@amd.com> Signed-off-by: Nipun Gupta <nipun.gupta@amd.com> Signed-off-by: Tarak Reddy <tarak.reddy@amd.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com> Link: https://lore.kernel.org/r/20230313132636.31850-8-nipun.gupta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: change read/write attributes Unfortunately, (R) and (W) are valid markups for enumerated lists, as described at: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists So, we ned to replace them by: (R) -> (Read) (W) -> (Write) As otherwise, (R) will be displayed as R., with is not what it is desired. There's no need to touch (RO) and (RW). Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6e81ad8064f3ed4f8dc265086fdf1c618043f935.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: change read/write attributes Unfortunately, (R) and (W) are valid markups for enumerated lists, as described at: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists So, we ned to replace them by: (R) -> (Read) (W) -> (Write) As otherwise, (R) will be displayed as R., with is not what it is desired. There's no need to touch (RO) and (RW). Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6e81ad8064f3ed4f8dc265086fdf1c618043f935.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
coresight: Adding ABI documentation Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 11 年前 | |
docs: ABI: change read/write attributes Unfortunately, (R) and (W) are valid markups for enumerated lists, as described at: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists So, we ned to replace them by: (R) -> (Read) (W) -> (Write) As otherwise, (R) will be displayed as R., with is not what it is desired. There's no need to touch (RO) and (RW). Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6e81ad8064f3ed4f8dc265086fdf1c618043f935.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: change read/write attributes Unfortunately, (R) and (W) are valid markups for enumerated lists, as described at: https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists So, we ned to replace them by: (R) -> (Read) (W) -> (Write) As otherwise, (R) will be displayed as R., with is not what it is desired. There's no need to touch (RO) and (RW). Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6e81ad8064f3ed4f8dc265086fdf1c618043f935.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
coresight-tpdm: Add integration test support Integration test for tpdm can help to generate the data for verification of the topology during TPDM software bring up. Sample: echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test cat /dev/tmc_etf0 > /data/etf-tpdm0.bin Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230117145708.16739-6-quic_jinlmao@quicinc.com | 3 年前 | |
Documentation: coresight: trbe: Sysfs ABI description Add sysfs ABI documentation for the TRBE devices. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> [ Split from the TRBE driver patch ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20210405164307.1720226-19-suzuki.poulose@arm.com Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> | 5 年前 | |
Documentation: Add document for UltraSoc SMB driver Bring in documentation for UltraSoc SMB driver. It simply describes the device, sysfs interface and the firmware bindings. Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Junhao He <hejunhao3@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230114101302.62320-3-hejunhao3@huawei.com | 3 年前 | |
Documentation: ABI: sysfs-bus-counter: Fix indentation Fix the indentation of the KernelVersion, Contact, and Description in external_input_phase_clock_select_available block by replacing spaces with tabs similar to other blocks. Reported-by: Pavel Machek <pavel@denx.de> Closes: https://lore.kernel.org/r/ZH8D3lCobUJP2T4K@duo.ucw.cz/ Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20230721151243.282435-1-biju.das.jz@bp.renesas.com/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> | 3 年前 | |
docs/ABI: use linux-s390 list as the main contact Remove Cornelia's email address from the file as suggested by her. List linux-s390 mailing-list address as the primary contact instead. Link: https://lore.kernel.org/linux-s390/8735d0oiq6.fsf@redhat.com/ Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> | 3 年前 | |
cxl/pmem: Export dirty shutdown count via sysfs mainline inclusion from mainline-v6.15-rc1 category: phytium Similar to how the acpi_nfit driver exports Optane dirty shutdown count, introduce: /sys/bus/cxl/devices/nvdimm-bridge0/ndbusX/nmemY/cxl/dirty_shutdown Under the conditions that 1) dirty shutdown can be set, 2) Device GPF DVSEC exists, and 3) the count itself can be retrieved. Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://patch.msgid.link/20250220220235.276831-4-dave@stgolabs.net Signed-off-by: Dave Jiang <dave.jiang@intel.com> Conflicts: Documentation/ABI/testing/sysfs-bus-cxl drivers/cxl/cxlmem.h (cherry picked from commit 7d0ecc0bd83dc2b2f46087f955c9572073e45aca) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 3 个月前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
memory: dfl-emif: add the DFL EMIF private feature driver This driver is for the EMIF private feature implemented under FPGA Device Feature List (DFL) framework. It is used to expose memory interface status information as well as memory clearing control. The purpose of memory clearing block is to zero out all private memory when FPGA is to be reprogrammed. This gives users a reliable method to prevent potential data leakage. [mdf@kernel.org: Fixed up ABI doc] Reviewed-by: Tom Rix <trix@redhat.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20210107043714.991646-9-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
fpga: dfl: add support for N3000 Nios private feature This patch adds support for the Nios handshake private feature on Intel PAC (Programmable Acceleration Card) N3000. The Nios is the embedded processor on the FPGA card. This private feature provides a handshake interface to FPGA Nios firmware, which receives retimer configuration command from host and executes via an internal SPI master (spi-altera). When Nios finishes the configuration, host takes over the ownership of the SPI master to control an Intel MAX10 BMC (Board Management Controller) Chip on the SPI bus. For Nios firmware handshake part, this driver requests the retimer configuration for Nios firmware on probe, and adds some sysfs nodes for user to query the onboard retimer's working mode and Nios firmware version. For SPI part, this driver adds a spi-altera platform device as well as the MAX10 BMC spi slave info. A spi-altera driver will be matched to handle the following SPI work. [mdf@kernel.org: Fixed up ABI doc kernel release] Reviewed-by: Tom Rix <trix@redhat.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20210107043714.991646-8-mdf@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
perf: Add branch stack counters ANBZ: #8006 commit 571d91dcadfa3cef499010b4eddb9b58b0da4d24 upstream. Currently, the additional information of a branch entry is stored in a u64 space. With more and more information added, the space is running out. For example, the information of occurrences of events will be added for each branch. Two places were suggested to append the counters. https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/ One place is right after the flags of each branch entry. It changes the existing struct perf_branch_entry. The later ARCH specific implementation has to be really careful to consistently pick the right struct. The other place is right after the entire struct perf_branch_stack. The disadvantage is that the pointer of the extra space has to be recorded. The common interface perf_sample_save_brstack() has to be updated. The latter is much straightforward, and should be easily understood and maintained. It is implemented in the patch. Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate the event which is recorded in the branch info. The "u64 counters" may store the occurrences of several events. The information regarding the number of events/counters and the width of each counter should be exposed via sysfs as a reference for the perf tool. Define the branch_counter_nr and branch_counter_width ABI here. The support will be implemented later in the Intel-specific patch. Intel-SIG: commit 571d91dcadfa perf: Add branch stack counters Backport LBR branch counter support to kernel v6.6. Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com [ Yunying Sun: amend commit log ] Signed-off-by: Yunying Sun <yunying.sun@intel.com> | 1 年前 | |
docs: ABI: fix syntax to be parsed using ReST notation There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
dmaengine: idxd: Add IDXD performance monitor support Implement the IDXD performance monitor capability (named 'perfmon' in the DSA (Data Streaming Accelerator) spec [1]), which supports the collection of information about key events occurring during DSA and IAX (Intel Analytics Accelerator) device execution, to assist in performance tuning and debugging. The idxd perfmon support is implemented as part of the IDXD driver and interfaces with the Linux perf framework. It has several features in common with the existing uncore pmu support: - it does not support sampling - does not support per-thread counting However it also has some unique features not present in the core and uncore support: - all general-purpose counters are identical, thus no event constraints - operation is always system-wide While the core perf subsystem assumes that all counters are by default per-cpu, the uncore pmus are socket-scoped and use a cpu mask to restrict counting to one cpu from each socket. IDXD counters use a similar strategy but expand the scope even further; since IDXD counters are system-wide and can be read from any cpu, the IDXD perf driver picks a single cpu to do the work (with cpu hotplug notifiers to choose a different cpu if the chosen one is taken off-line). More specifically, the perf userspace tool by default opens a counter for each cpu for an event. However, if it finds a cpumask file associated with the pmu under sysfs, as is the case with the uncore pmus, it will open counters only on the cpus specified by the cpumask. Since perfmon only needs to open a single counter per event for a given IDXD device, the perfmon driver will create a sysfs cpumask file for the device and insert the first cpu of the system into it. When a user uses perf to open an event, perf will open a single counter on the cpu specified by the cpu mask. This amounts to the default system-wide rather than per-cpu counting mentioned previously for perfmon pmu events. In order to keep the cpu mask up-to-date, the driver implements cpu hotplug support for multiple devices, as IDXD usually enumerates and registers more than one idxd device. The perfmon driver implements basic perfmon hardware capability discovery and configuration, and is initialized by the IDXD driver's probe function. During initialization, the driver retrieves the total number of supported performance counters, the pmu ID, and the device type from idxd device, and registers itself under the Linux perf framework. The perf userspace tool can be used to monitor single or multiple events depending on the given configuration, as well as event groups, which are also supported by the perfmon driver. The user configures events using the perf tool command-line interface by specifying the event and corresponding event category, along with an optional set of filters that can be used to restrict counting to specific work queues, traffic classes, page and transfer sizes, and engines (See [1] for specifics). With the configuration specified by the user, the perf tool issues a system call passing that information to the kernel, which uses it to initialize the specified event(s). The event(s) are opened and started, and following termination of the perf command, they're stopped. At that point, the perfmon driver will read the latest count for the event(s), calculate the difference between the latest counter values and previously tracked counter values, and display the final incremental count as the event count for the cycle. An overflow handler registered on the IDXD irq path is used to account for counter overflows, which are signaled by an overflow interrupt. Below are a couple of examples of perf usage for monitoring DSA events. The following monitors all events in the 'engine' category. Becuuse no filters are specified, this captures all engine events for the workload, which in this case is 19 iterations of the work generated by the kernel dmatest module. Details describing the events can be found in Appendix D of [1], Performance Monitoring Events, but briefly they are: event 0x1: total input data processed, in 32-byte units event 0x2: total data written, in 32-byte units event 0x4: number of work descriptors that read the source event 0x8: number of work descriptors that write the destination event 0x10: number of work descriptors dispatched from batch descriptors event 0x20: number of work descriptors dispatched from work queues # perf stat -e dsa0/event=0x1,event_category=0x1/, dsa0/event=0x2,event_category=0x1/, dsa0/event=0x4,event_category=0x1/, dsa0/event=0x8,event_category=0x1/, dsa0/event=0x10,event_category=0x1/, dsa0/event=0x20,event_category=0x1/ modprobe dmatest channel=dma0chan0 timeout=2000 iterations=19 run=1 wait=1 Performance counter stats for 'system wide': 5,332 dsa0/event=0x1,event_category=0x1/ 5,327 dsa0/event=0x2,event_category=0x1/ 19 dsa0/event=0x4,event_category=0x1/ 19 dsa0/event=0x8,event_category=0x1/ 0 dsa0/event=0x10,event_category=0x1/ 19 dsa0/event=0x20,event_category=0x1/ 21.977436186 seconds time elapsed The command below illustrates filter usage with a simple example. It specifies that MEM_MOVE operations should be counted for the DSA device dsa0 (event 0x8 corresponds to the EV_MEM_MOVE event - Number of Memory Move Descriptors, which is part of event category 0x3 - Operations. The detailed category and event IDs are available in Appendix D, Performance Monitoring Events, of [1]). In addition to the event and event category, a number of filters are also specified (the detailed filter values are available in Chapter 6.4 (Filter Support) of [1]), which will restrict counting to only those events that meet all of the filter criteria. In this case, the filters specify that only MEM_MOVE operations that are serviced by work queue wq0 and specifically engine number engine0 and traffic class tc0 having sizes between 0 and 4k and page size of between 0 and 1G result in a counter hit; anything else will be filtered out and not appear in the final count. Note that filters are optional - any filter not specified is assumed to be all ones and will pass anything. # perf stat -e dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7, filter_eng=0x1,event=0x8,event_category=0x3/ modprobe dmatest channel=dma0chan0 timeout=2000 iterations=19 run=1 wait=1 Performance counter stats for 'system wide': 19 dsa0/filter_wq=0x1,filter_tc=0x1,filter_sz=0x7, filter_eng=0x1,event=0x8,event_category=0x3/ 21.865914091 seconds time elapsed The output above reflects that the unspecified workload resulted in the counting of 19 MEM_MOVE operation events that met the filter criteria. [1]: https://software.intel.com/content/www/us/en/develop/download/intel-data-streaming-accelerator-preliminary-architecture-specification.html [ Based on work originally by Jing Lin. ] Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Link: https://lore.kernel.org/r/0c5080a7d541904c4ad42b848c76a1ce056ddac7.1619276133.git.zanussi@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: sysfs-bus-event_source-devices-hv_gpci: Document affinity_domain_via_partition sysfs interface file Add details of the new hv-gpci interface file called "affinity_domain_via_partition" in the ABI documentation. Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230729073455.7918-11-kjain@linux.ibm.com | 3 年前 | |
iommu/vt-d: Support cpumask for IOMMU perfmon The perf subsystem assumes that all counters are by default per-CPU. So the user space tool reads a counter from each CPU. However, the IOMMU counters are system-wide and can be read from any CPU. Here we use a CPU mask to restrict counting to one CPU to handle the issue. (with CPU hotplug notifier to choose a different CPU if the chosen one is taken off-line). The CPU is exposed to /sys/bus/event_source/devices/dmar*/cpumask for the user space perf tool. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230128200428.1459118-6-kan.liang@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 3 年前 | |
perf/x86/intel/uncore: Add alias PMU name A perf PMU may have two PMU names. For example, Intel Sapphire Rapids server supports the discovery mechanism. Without the platform-specific support, an uncore PMU is named by a type ID plus a box ID, e.g., uncore_type_0_0, because the real name of the uncore PMU cannot be retrieved from the discovery table. With the platform-specific support later, perf has the mapping information from a type ID to a specific uncore unit. Just like the previous platforms, the uncore PMU is named by the real PMU name, e.g., uncore_cha_0. The user scripts which work well with the old numeric name may not work anymore. Add a new attribute "alias" to indicate the old numeric name. The following userspace perf tool patch will handle both names. The user scripts should work properly with the updated perf tool. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Link: https://lore.kernel.org/r/1625087320-194204-13-git-send-email-kan.liang@linux.intel.com | 5 年前 | |
Documentation/ABI: correct possessive "its" typos Correct all uses of "it's" that are meant to be possessive "its". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220801025207.29971-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: typo fixes in Documentation/ABI/ Fix the following typos in the Documentation/ABI/ directory: - In file obsolete/sysfs-cpuidle, change "obselete" for "obsolete". - In file removed/sysfs-kernel-uids, change "propotional" for "proportional". - In directory stable/, fix the following words: "associtated" for "associated", "hexidecimal" for "hexadecimal", "vlue" for "value", "csed" for "caused" and "wrtie" for "write". This updates a total of five files. - In directory testing/, fix the following words: "subystem" for "subsystem", "isochrnous" for "isochronous", "Desctiptors" for "Descriptors", "picutre" for "picture", "capture" for "capture", "occured" for "ocurred", "connnected" for "connected","agressively" for "aggressively","manufacturee" for "manufacturer" and "transaction" for "transaction", "malformatted" for "incorrectly formated" ,"internel" for "internal", "writtento" for "written to", "specificed" for "specified", "beyound" for "beyond", "Symetric" for "Symmetric". This updates a total of eleven files. Signed-off-by: Carlos Bilbao <bilbao@vt.edu> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5710038.lOV4Wx5bFT@iron-maiden Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs: ABI: fix spelling/grammar in SBEFIFO timeout interface Correct spelling problems as identified by codespell. Correct one grammar error. Fixes: 9a93de620e0a ("docs: ABI: testing: Document the SBEFIFO timeout interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eddie James <eajames@linux.ibm.com> Cc: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20230710052305.29611-1-rdunlap@infradead.org Signed-off-by: Joel Stanley <joel@jms.id.au> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
HSI: Add HSI ABI documentation Adds sysfs HSI framework documentation Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> | 14 年前 | |
rtc: bq32000: add support to enable disable the trickle charge FET bypass The bq32000 includes a trickle charge circuit to maintain the charge of the backup supply when a super capacitor is used. You can enable the charging circuit by setting 'trickle-resistor-ohms', additionally you can set TCFE to 1 to bypass the internal diode and boost the charge voltage of the backup supply. You might want to enable/disable the TCFE switch from userspace (e.g when device is only connected to a battery) This patch introduces a new sysfs entry to enable and disable this FET form userspace. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> | 9 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
ABI: Fix KernelVersion tags It is "KernelVersion:" and not "Kernel Version:". Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
mfd: Remove lm3533 boost attributes Remove boost-frequency and ovp attributes, which can be set through platform data, from sysfs. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 14 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
iio: Add event enums for running period and count There are devices (such as Murata IRS-D200 PIR proximity sensor) that check the data signal with a running period. I.e. for a specified time, they count the number of conditions that have occurred, and then signal if that is more than a specified amount. IIO_EV_INFO_PERIOD resets when the condition no longer is true and is therefore not suitable for these devices. Add a new iio_event_info IIO_EV_INFO_RUNNING_PERIOD that can be used as a running period. Also add a new IIO_EV_INFO_RUNNING_COUNT that can be used to specify the number of conditions that must occur during this running period. Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/ee4a801ae9b9c4716c7bd23d8f79f232351df8bd.1689753076.git.waqar.hameed@axis.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 3 年前 | |
iio: accel: adxl372: Add additional trigger ABI docs Document use of additional trigger supplied by driver. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20200810093257.65929-3-alexandru.tachici@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 5 年前 | |
iio: accel: BMC150 accel documentation Added any-motion trigger documentation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 11 年前 | |
Documentation: ad4130: format list of in_voltage-voltage_filter_mode_available modes Sphinx reports two warnings on sysfs documentation for AD4130 driver: Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Unexpected indentation. Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Block quote ends without a blank line; unexpected unindent. These are due to misformatting of sinc* modes list. Format it with bullet list. Since each entry spans multiple lines, separate each with a blank line. Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20221106140233.74112-1-bagasdotme@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 3 年前 | |
Documentation: ABI: testing: ad7192: update sysfs docs Updated mainline documentation on ad7192 userspace sysfs. Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 6 年前 | |
iio:adc:ad7280a: Document ABI for cell balance switches Very minimal ABI docs. This is unusual enough that I'd expect anyone who actually wanted to touch them to go look at the datasheet. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Link: https://lore.kernel.org/r/20220206190328.333093-18-jic23@kernel.org | 4 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: ABI: testing: add max11410 doc Adding documentation for Analog Devices max11410 adc userspace sysfs. Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com> Link: https://lore.kernel.org/r/20221003105903.229-4-Ibrahim.Tilki@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 3 年前 | |
iio: Documentation: Add max9611 sysfs documentation Add documentation for max9611 driver. Document attributes describing value of shunt resistor installed between RS+ and RS- voltage sense inputs. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 9 年前 | |
Documentation: ABI: testing: mt6360: Add ADC sysfs guideline Add ABI documentation for mt6360 ADC sysfs interfaces. Signed-off-by: Gene Chen <gene_chen@richtek.com> Link: https://lore.kernel.org/r/1603181267-15610-3-git-send-email-gene.chen.richtek@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
iio: document bno055 private sysfs attributes Add ABI documentation for bno055 driver private sysfs attributes. Signed-off-by: Andrea Merello <andrea.merello@iit.it> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220907132205.28021-10-andrea.merello@iit.it Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 3 年前 | |
iio: cdc: ad7746: Add device specific ABI documentation. The datasheet description of offset calibration is complex, so for that on just refer the reader to the device datasheet. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220626122938.582107-16-jic23@kernel.org | 4 年前 | |
iio: chemical: Add driver support for sgp40 sgp40 is a gas sensor used for measuring the air quality. This driver is reading the raw resistance value which can be passed to an userspace algorithm for further calculation. The raw value is also used to calculate an estimated absolute voc index in the range from 0 to 500. For this purpose the raw_mean value of the resistance for which the index value is 250 might be set up as a calibration step. This can be done with in_resistance_calibbias. Compensation of relative humidity and temperature is supported and can be used by writing to output values of out_humidityrelative_raw and out_temp_raw. There is a predecesor sensor type (sgp30) already existing. This driver module was not extended because the new sensor is quite different in its i2c telegrams. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210804154641.GA3237@arbad Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 5 年前 | |
iio: ABI: docs: Document Senseair Sunrise ABI Add documentation for the sysfs attributes of the sunrise_co2 driver. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Link: https://lore.kernel.org/r/20210920135413.140310-3-jacopo+renesas@jmondi.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 4 年前 | |
iio: sysfs-bus-iio-*: update email contact Change email contact for ABI documention to author's current employer on the following files: * sysfs-bus-iio-chemical-vz89x * sysfs-bus-iio-proximity-as3935 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 8 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation/ABI/testing: Add documentation for AD5766 new ABI New interface is proposed for dither functionality. This future allows composing an external signals to the selected output channel. The dither signal can be turned on/off, scaled, inverted, or it can be selected from different sources. Signed-off-by: Cristian Pop <cristian.pop@analog.com> Link: https://lore.kernel.org/r/20210115112105.58652-2-cristian.pop@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 5 年前 | |
iio: dpot-dac: DAC driver based on a digital potentiometer It is assumed that the dpot is used as a voltage divider between the current dpot wiper setting and the maximum resistance of the dpot. The divided voltage is provided by a vref regulator. .------. .-----------. | | | vref |--' .---. | regulator |--. | | '-----------' | | d | | | p | | | o | wiper | | t |<---------+ | | | | '---' dac output voltage | | '------+------------+ Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 9 年前 | |
iio: ABI: add ABI file for the LTC2688 DAC Define the sysfs interface for toggle or dither capable channels. Dither capable channels will have the extended interface: * out_voltageY_dither_en * out_voltageY_dither_raw * out_voltageY_dither_offset * out_voltageY_dither_raw_available * out_voltageY_dither_frequency * out_voltageY_dither_frequency_available * out_voltageY_dither_phase * out_voltageY_dither_phase_available Toggle enabled channels will have: * out_voltageY_toggle_en * out_voltageY_raw0 * out_voltageY_raw1 * out_voltageY_symbol The common interface present in all channels is: * out_voltageY_raw (not present in toggle enabled channels) * out_voltageY_raw_available * out_voltageY_powerdown * out_voltageY_scale * out_voltageY_offset * out_voltageY_calibbias * out_voltageY_calibscale Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220225130129.69-3-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 4 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
iio:ABI docs: Combine the two instances of docs for sensor_sensitivity This control on the gain of a measurement used for time of flight sensing is standard but the expected values for different enviroments may not be. As we cannot have the same ABI element documented in two files, add a generic version to sysfs-bus-iio-proximity and a note on the expected value vs measuring environment for the as3935. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-distance-srf08:0 ./Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935:8 Cc: Matt Ranostay <matt.ranostay@konsulko.com> Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210117153816.696693-7-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 5 年前 | |
iio: buffer-dmaengine: Report buffer length requirements The dmaengine buffer has some length alignment requirements that can differ from platform to platform. If the length alignment requirements are not met unexpected behavior like dropping of samples can occur. Currently these requirements are not reported and applications need to know the requirements of the platform by some out-of-band means. Add a new buffer attribute that reports the length alignment requirements called length_align_bytes. The reported length alignment is in bytes that means the buffer length alignment in sample sets depends on the number of enabled channels and the bytes per channel. Applications using this attribute to determine the buffer size requirements need to consider this. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 6 年前 | |
ABI: testing: fix admv8818 attr description [ Upstream commit 7d34b4ad8cd2867b130b5b8d7d76d0d6092bd019 ] Fix description of the filter_mode_available attribute by pointing to the correct name of the attribute that can be written with valid values. Fixes: bf92d87d7c67 ("iio:filter:admv8818: Add sysfs ABI documentation") Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://patch.msgid.link/20240702081851.4663-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org> | 1 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
iio: fix typo, Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 12 年前 | |
iio:ABI docs: Move specific description of out_altvoltageX_frequency to main docs. The adf4371 has channels that are very closely coupled, so additional documentation is needed to express these constraints. Unfortunately having the same sysfs filename in multiple documentation does not work well when generating automated documentation. To avoid this issue, we add a new device specific description to the main docs and remove the one in the device specific file. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371:0 ./Documentation/ABI/testing/sysfs-bus-iio:599 Cc: Alexandru Ardelean <alexandru.ardelean@analog.com> Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210117153816.696693-8-jic23@kernel.org | 5 年前 | |
Documentation:ABI:testing:admv1013: add ABI docs Add documentation for the use of the Local Oscillator Feedthrough Offset calibration. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20211221112206.97066-3-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 4 年前 | |
Documentation: ABI: testing: admv1014: add ABI docs Add documentation for the use of the Digital Attenuator gain. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20220215081216.67706-3-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 4 年前 | |
iio:gyro:bmg160 documentation Added any-motion trigger documentation. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 11 年前 | |
iio:ABI docs: Fix issue around repeated definition of out_currentY_raw This one is challenging as both the places this appears in specific drivers are making 'unusual' uses of what looks like a simple output current channel. As a side note, this was particular bit of ABI occurs in other drivers where the use is much more straight forward e.g. dac/ad5421 This patch attempts to make a best effort of adding it to the main docs but retaining enough information. Both of these drivers probably need specific documents being written to describe their unusual interfaces, but those should be in the main documentation, not under Documentation/ABI. That is a non trivial job so left for another time. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als:43 ./Documentation/ABI/testing/sysfs-bus-iio-health-afe440x:38 Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210117153816.696693-5-jic23@kernel.org | 5 年前 | |
iio:ABI docs: Combine sysfs-bus-iio-humidity-hdc2010/hdc100x into one file These contain only one entry for out_current_heater_raw (_available). Document this in a new sysfs-bus-iio-humidity file, and make it a little more generic by allowing for non 0/1 values. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:0 ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:0 Warning: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010:1 ./Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x:1 Cc: Eugene Zaikonnikov <ez@norphonic.com> Cc: Matt Ranostay <matt.ranostay@konsulko.com> Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210117153816.696693-6-jic23@kernel.org | 5 年前 | |
staging: iio: ad5933: add ABI documentation Add an ABI documentation for the ad5933 driver. Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 7 年前 | |
iio: ina2xx: add ABI documentation entry sysfs-bus-iio-ina2xx-adc Documentation for attributes: * in_allow_async_readout * in_shunt_resistor Signed-off-by: Marc Titinger <mtitinger@baylibre.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 10 年前 | |
iio: light: isl29501: Add support for the ISL29501 ToF sensor. This patch adds support for the ISL29501 Time of Flight sensor. Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 8 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
iio:ABI docs: Fix issue around repeated definition of out_currentY_raw This one is challenging as both the places this appears in specific drivers are making 'unusual' uses of what looks like a simple output current channel. As a side note, this was particular bit of ABI occurs in other drivers where the use is much more straight forward e.g. dac/ad5421 This patch attempts to make a best effort of adding it to the main docs but retaining enough information. Both of these drivers probably need specific documents being written to describe their unusual interfaces, but those should be in the main documentation, not under Documentation/ABI. That is a non trivial job so left for another time. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als:43 ./Documentation/ABI/testing/sysfs-bus-iio-health-afe440x:38 Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210117153816.696693-5-jic23@kernel.org | 5 年前 | |
iio: light: introduce si1133 e-mail received from Silicon Lab to confirm that the licensing isn't a problem. " Dear Maxime Roussin-Belanger, The LUX calculation code only works with Si1133. As long as the software is used with Silicon Lab's sensor product, I don't see any problem. Regards, Tony " Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com> Reviewed-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 8 年前 | |
staging: iio: tsl2583: move out of staging Move tsl2580, tsl2581, tsl2583 driver out of staging into mainline. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 9 年前 | |
staging:iio:light: Move tsl2x7x ABI docs to correct location. These seem to be up to date but never moved out of staging when the driver did. Hence let us move them out now. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Brian Masney <masneyb@onstation.org> Cc: Brian Masney <masneyb@onstation.org> Link: https://lore.kernel.org/r/20200905174721.216452-3-jic23@kernel.org | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
iio: Documentation: sysfs-bus-iio-meas-spec: Remove (partially) duplicate line Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 9 年前 | |
Invensense MPU6050 Device Driver. This the basic functional Invensense MPU6050 Device driver. Signed-off-by: Ge Gao <ggao@invensense.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 13 年前 | |
iio: mcp4531: provide range of available raw values Example: $ cat '/sys/bus/iio/devices/iio:device0/out_resistance_raw_available' [0 1 256] Meaning: min 0, step 1 and max 256. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 9 年前 | |
Documentation/ABI: correct possessive "its" typos Correct all uses of "it's" that are meant to be possessive "its". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220801025207.29971-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
iio:ABI docs: Combine the two instances of docs for sensor_sensitivity This control on the gain of a measurement used for time of flight sensing is standard but the expected values for different enviroments may not be. As we cannot have the same ABI element documented in two files, add a generic version to sysfs-bus-iio-proximity and a note on the expected value vs measuring environment for the as3935. Fixes $ scripts/get_abi.pl validate Warning: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity is defined 2 times: ./Documentation/ABI/testing/sysfs-bus-iio-distance-srf08:0 ./Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935:8 Cc: Matt Ranostay <matt.ranostay@konsulko.com> Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Link: https://lore.kernel.org/r/20210117153816.696693-7-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 5 年前 | |
iio: chemical: sps30: fix attribute kernel version 4.22 have never existed and this change was actually added to 5.0 hence fix the numbering. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 7 年前 | |
iio: Add SEMTECH SX9310/9311 sensor driver Add SEMTECH SX9310/9311 driver. The device has the following entry points: Usual frequency: - sampling_frequency - sampling_frequency_available Instant reading of current values for different sensors: - in_proximity0_raw - in_proximity1_raw - in_proximity2_raw - in_proximity3_comb_raw and associated events in events/ Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Enrico Granata <egranata@chromium.org> Signed-off-by: Daniel Campello <campello@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 6 年前 | |
iio: proximity: sx9324: add empty line in front of bullet list "make htmldocs" emits a warning of: Documentation/ABI/testing/sysfs-bus-iio-sx9324:2: WARNING: Unexpected indentation. This is due to a missing empty line in front of the bullet list. Fix it. Note: The line count of 2 in the warning is not exact in this case. Signed-off-by: Akira Yokosawa <akiyks@gmail.com> Fixes: 4c18a890dff8 ("iio:proximity:sx9324: Add SX9324 support") Link: https://lore.kernel.org/r/202207021703.lEW6FLT1-lkp@intel.com/ Reported-by: kernel test robot <lkp@intel.com> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/abcaa4f5-7a9b-56b5-c11a-a88fef9d1e0a@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 4 年前 | |
iio: ABI: temperature: Unify documentation for thermocouple fault detection. Kernel documentation for a given ABI element should not be duplicated in multiple files, so pull them into one higher level documentation file. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Navin Sankar Velliangiri <navin@linumiz.com> Cc: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/20220626165511.602202-2-jic23@kernel.org | 4 年前 | |
iio: ABI: stm32-timer-trigger: Fuse unusual ABI into main doc. We can't duplicate the description of sampling_frequency. This device has some unusual requirements which we solved by giving a sampling_frequency of 0 special meaning. As such add a note about this unusual usage to the main documentation. Whilst I don't particularly like this resolution, it is the best I could come up with given earlier discussion on this topic. Link: https://lore.kernel.org/linux-iio/20210315101217.00002c50@Huawei.com/ Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Link: https://lore.kernel.org/r/20220626165511.602202-4-jic23@kernel.org | 4 年前 | |
Documentation: iio-trig-sysfs: Add remove_trigger attribute ABI This patch adds the documentation ABI for the remove_trigger attribute, provided by the iio-trig-sysfs stand-alone driver. Signed-off-by: Cristina Opriceana <cristina.opriceana@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> | 10 年前 | |
iio: adc: vf610: fix conversion mode sysfs node name The documentation missed the "in_" prefix for this IIO_SHARED_BY_DIR entry. Fixes: bf04c1a367e3 ("iio: adc: vf610: implement configurable conversion modes") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/560dc93fafe5ef7e9a409885fd20b6beac3973d8.1653900626.git.baruch@tkos.co.il Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
intel_th: Add PTI output driver Parallel Trace Interface (PTI) unit is a trace output device that sends data over a PTI port. The driver provides interfaces to configure bus width, bus clock divider and mode. Tracing is enabled via output device's "active" attribute. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 10 年前 | |
intel_th: Update ABI documentation Commit a753bfcfdb1f3 ("intel_th: Make the switch allocate its subdevices") changed the behavior so that the output port devices are created only for the ports reported by the hardware and their initial state is "unassigned" until a corresponding output port driver is loaded. Reflect this fact in the ABI documentation. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Reported-by: Ricardo Neri <ricardo.neri@intel.com> | 7 年前 | |
mcb: export bus information via sysfs Export information about the bus stored in the FPGA's header to userspace via sysfs, instead of hiding it in pr_debug()s from everyone. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Andreas Werner <andreas.werner@men.de> Tested-by: Andreas Werner <andreas.werner@men.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 10 年前 | |
ABI: sysfs-bus-mdio: add alternate What for mdio symbols Not all sysfs nodes are shown under: /sys/bus/mdio_bus/devices/... They can also be at: /sys/class/mdio_bus/.../ So, update the What: entries to allow both. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/aa51f6c2d482b28a349ba67e2a3904564e67496b.1632750608.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
[media] media: Media device The media_device structure abstracts functions common to all kind of media devices (v4l2, dvb, alsa, ...). It manages media entities and offers a userspace API to discover and configure the media device internal topology. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> | 15 年前 | |
mei: add vtag support bit in client properties Vtag support is on a client basis, meaning not every client supports it. The vtag capability is communicated via the client properties structure during client enumeration process. Export the propertiy via sysfs. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200818115147.2567012-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
mmc: core: export emmc revision Expose emmc revision as part of device attributes. Signed-off-by: Jin Qian <jinqian@android.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> | 8 年前 | |
docs: ABI: fix syntax to be parsed using ReST notation There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
treewide: change my e-mail address, fix my name Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: fix an RST error in sysfs-bus-nvdimm The literal blocks in this file lacked the necessary blank line at the top, causing Sphinx to complain: /Documentation/ABI/testing/sysfs-bus-nvdimm:11: WARNING: Unexpected indentation. Add the lines it's longing for and bring about a bit of warning peace. Reported-by: Hu Haowen <src.res.211@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
tee: optee: Fix supplicant based device enumeration [ Upstream commit 7269cba53d906cf257c139d3b3a53ad272176bca ] Currently supplicant dependent optee device enumeration only registers devices whenever tee-supplicant is invoked for the first time. But it forgets to remove devices when tee-supplicant daemon stops running and closes its context gracefully. This leads to following error for fTPM driver during reboot/shutdown: [ 73.466791] tpm tpm0: ftpm_tee_tpm_op_send: SUBMIT_COMMAND invoke error: 0xffff3024 Fix this by adding an attribute for supplicant dependent devices so that the user-space service can detect and detach supplicant devices before closing the supplicant: $ for dev in /sys/bus/tee/devices/*; do if [[ -f "$dev/need_supplicant" && -f "$dev/driver/unbind" ]]; \ then echo $(basename "$dev") > $dev/driver/unbind; fi done Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Closes: https://github.com/OP-TEE/optee_os/issues/6094 Fixes: 5f178bb71e3a ("optee: enable support for multi-stage bus enumeration") Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jerome Forissier <jerome.forissier@linaro.org> [jw: fixed up Date documentation] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> | 2 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
PCI: Add 'reset_subordinate' to reset hierarchy below bridge [ Upstream commit 2fa046449a82a7d0f6d9721dd83e348816038444 ] The "bus" and "cxl_bus" reset methods reset a device by asserting Secondary Bus Reset on the bridge leading to the device. These only work if the device is the only device below the bridge. Add a sysfs 'reset_subordinate' attribute on bridges that can assert Secondary Bus Reset regardless of how many devices are below the bridge. This resets all the devices below a bridge in a single command, including the locking and config space save/restore that reset methods normally do. This may be the only way to reset devices that don't support other reset methods (ACPI, FLR, PM reset, etc). Link: https://lore.kernel.org/r/20241025222755.3756162-1-kbusch@meta.com Signed-off-by: Keith Busch <kbusch@kernel.org> [bhelgaas: commit log, add capable(CAP_SYS_ADMIN) check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org> | 1 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: Fix KernelVersion tags It is "KernelVersion:" and not "Kernel Version:". Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
misc/pvpanic: add PCI driver Add support for pvpanic PCI device added in qemu [1]. At probe time, obtain the address where to read/write pvpanic events and pass it to the generic handling code. Will follow the same logic as pvpanic MMIO device driver. At remove time, unmap base address and disable PCI device. [1] https://github.com/qemu/qemu/commit/9df52f58e76e904fb141b10318362d718f470db2 Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com> Link: https://lore.kernel.org/r/1616597356-20696-4-git-send-email-mihai.carabas@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
can: janz-ican3: add documentation for existing sysfs entries This patch adds documentation for the existing sysfs entries for the janz PCI module. Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 11 年前 | |
xhci: dbc: Allow users to modify DbC poll interval via sysfs [ Upstream commit de3edd47a18fe05a560847cc3165871474e08196 ] xhci DbC driver polls the host controller for DbC events at a reduced rate when DbC is enabled but there are no active data transfers. Allow users to modify this reduced poll interval via dbc_poll_interval_ms sysfs entry. Unit is milliseconds and accepted range is 0 to 5000. Max interval of 5000 ms is selected as it matches the common 5 second timeout used in usb stack. Default value is 64 milliseconds. A long interval is useful when users know there won't be any activity on systems connected via DbC for long periods, and want to avoid battery drainage due to unnecessary CPU usage. Example being Android Debugger (ADB) usage over DbC on ChromeOS systems running Android Runtime. [minor changes and rewording -Mathias] Co-developed-by: Samuel Jacob <samjaco@google.com> Signed-off-by: Samuel Jacob <samjaco@google.com> Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20240626124835.1023046-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 6f126ef0117c98a2e07a0c3e0b814de5e3fbf4e4) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 9 个月前 | |
peci: Add sysfs interface for PECI bus PECI devices may not be discoverable at the time when PECI controller is being added (e.g. BMC can boot up when the Host system is still in S5). Since we currently don't have the capabilities to figure out the Host system state inside the PECI subsystem itself, we have to rely on userspace to do it for us. In the future, PECI subsystem may be expanded with mechanisms that allow us to avoid depending on userspace interaction (e.g. CPU presence could be detected using GPIO, and the information on whether it's discoverable could be obtained over IPMI). Unfortunately, those methods may ultimately not be available (support will vary from platform to platform), which means that we still need platform independent method triggered by userspace. Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-8-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-bus-platform: add modalias description Define the modalias parameter for platform devices, including the ones exposed via devicetree. Acked-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/9cdebbad008886b1d09f5f3ac5d88bee19f08d97.1632750608.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
misc: smpro-errmon: Add dimm training failure syndrome Adds event_dimm[0-15]_syndrome sysfs to report the failure syndrome to BMC when DIMM training failed. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Link: https://lore.kernel.org/r/20230310083416.3670980-3-quan@os.amperecomputing.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
docs: ABI: testing: Document the OCC hwmon FFDC binary interface Add documentation for the new binary sysfs that will dump the SBEFIFO FFDC. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20211019205307.36946-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au> | 4 年前 | |
usb: misc: Add onboard_usb_hub driver The main issue this driver addresses is that a USB hub needs to be powered before it can be discovered. For discrete onboard hubs (an example for such a hub is the Realtek RTS5411) this is often solved by supplying the hub with an 'always-on' regulator, which is kind of a hack. Some onboard hubs may require further initialization steps, like changing the state of a GPIO or enabling a clock, which requires even more hacks. This driver creates a platform device representing the hub which performs the necessary initialization. Currently it only supports switching on a single regulator, support for multiple regulators or other actions can be added as needed. Different initialization sequences can be supported based on the compatible string. Besides performing the initialization the driver can be configured to power the hub off during system suspend. This can help to extend battery life on battery powered devices which have no requirements to keep the hub powered during suspend. The driver can also be configured to leave the hub powered when a wakeup capable USB device is connected when suspending, and power it off otherwise. Technically the driver consists of two drivers, the platform driver described above and a very thin USB driver that subclasses the generic driver. The purpose of this driver is to provide the platform driver with the USB devices corresponding to the hub(s) (a hub controller may provide multiple 'logical' hubs, e.g. one to support USB 2.0 and another for USB 3.x). Co-developed-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20220630123445.v24.3.I7c9a1f1d6ced41dd8310e8a03da666a32364e790@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-bus-rapidio: use wildcards on What definitions While humans may be able to understand that something like: /sys/bus/rapidio/devices/nn:d:iiii could actually mean: /sys/bus/rapidio/devices/00:e:0000 This is something that computers can't easily identify. As get_abi.pl needs to convert it into a regex, change What: lines to: /sys/bus/rapidio/devices/<nn>:<d>:<iiii> Which is the commonly-used pattern on ABI files for wildcards. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/207762e994d50eec0bf8d61c3adf153030c821eb.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
rpmsg: Add driver_override device attribute for rpmsg_device This patch adds "driver_override" device attribute for rpmsg_device which will allow users to explicitly specify the rpmsg_driver to be used via sysfs entry. The "driver_override" device attribute implemented here is very similar to "driver_override" implemented for platform, pci, and amba bus types. One important use-case of "driver_override" device attribute is to force use of rpmsg_chrdev driver for certain rpmsg_device instances. Signed-off-by: Anup Patel <anup@brainfault.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> | 8 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: sysfs-bus-soundwire-master: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/eb62c19ce92c0dc1a50eb57c1052866256250644.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> | 4 年前 | |
ABI: sysfs-bus-soundwire-slave: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/416f4a746c116147abb08fb0155a6a4ed065dfd7.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> | 4 年前 | |
mtd: spi-nor: sysfs: hide manufacturer if it is not set The manufacturer may be optional when pure SFDP flashes are supported. Hide the sysfs property if no manufacturer is set. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-3-michael@walle.cc | 3 年前 | |
platform/surface: Add KIP/POS tablet-mode switch driver Add a driver providing a tablet-mode switch input device for Microsoft Surface devices using the Surface Aggregator KIP subsystem (to manage detachable peripherals) or POS subsystem (to obtain device posture information). The KIP (full name unknown, abbreviation found through reverse engineering) subsystem is used on the Surface Pro 8 and Surface Pro X to manage the keyboard cover. Among other things, it provides information on the positioning (posture) of the cover (closed, laptop-style, detached, folded-back, ...), which can be used to implement an input device providing the SW_TABLET_MODE event. Similarly, the POS (posture information) subsystem provides such information on the Surface Laptop Studio, with the difference being that the keyboard is not detachable. As implementing the tablet-mode switch for both subsystems is largely similar, the driver proposed in this commit, in large, acts as a generic tablet mode switch driver framework for the Surface Aggregator Module. Specific implementations using this framework are provided for the KIP and POS subsystems, adding tablet-mode switch support to the aforementioned devices. A few more notes on the Surface Laptop Studio: A peculiarity of the Surface Laptop Studio is its "slate/tent" mode (symbolized: user> _/\). In this mode, the screen covers the keyboard but leaves the touchpad exposed. This is essentially a mode in-between tablet and laptop, and it is debatable whether tablet-mode should be enabled in this mode. We therefore let the user decide this via a module parameter. In particular, tablet-mode may bring up the on-screen touch keyboard more easily, which would be desirable in this mode. However, some user-space software currently also decides to disable keyboard and, more importantly, touchpad input, while the touchpad is still accessible in the "slate/tent" mode. Furthermore, this mode shares its identifier with "slate/flipped" mode where the screen is flipped 180° and the keyboard points away from the user (symbolized: user> /_). In this mode we would like to enable auto-rotation, something that user-space software may only do when tablet-mode is enabled. We therefore default to the slate-mode enabling the tablet-mode switch. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20220624183642.910893-3-luzmaximilian@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 4 年前 | |
Documentation/ABI: thunderbolt: Replace 01.org in contact The mailing list on 01.org does not work anymore and the whole site redirects to intel.com Open Source page so replace the 01.org address with my email address. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> | 3 年前 | |
usb: typec: Bus type for alternate modes Introducing a simple bus for the alternate modes. Bus allows binding drivers to the discovered alternate modes the partners support. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
USB: Remove Wireless USB and UWB documentation Support for Wireless USB and Ultra WideBand was removed in 2020 by commit caa6772db4c1 ("Staging: remove wusbcore and UWB from the kernel tree."). But the documentation files were left behind. Let's get rid of that out-of-date documentation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/015d4310-bcd3-4ba4-9a0e-3664f281a9be@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
usb: misc: lvstest: add entry to place port in compliance mode Add support for the SuperSpeed Link Layer test case TD.7.34 which requires the operator to place the port into compliance mode, and to subsequently bring it out via reset. Historically according to the (now deprecated) USB 3.0 specification a SuperSpeed host downstream port would automatically transition to Compliance mode from the Polling state if LFPS polling times out. However the language in USB 3.1 as well as xHCI 1.1 states it may be required to explicitly enable this transition. For such hosts this is done by sending a SET_FEATURE(PORT_LINK_STATE) with the state set to Compliance to the root hub port. Similar to the other supported commands, to do this via sysfs: echo > /sys/bus/usb/devices/2-0\:1.0/enable_compliance According to xHCI 1.1 section 4.19.1.2.4.1, this enables the transition to compliance mode upon LFPS timeout. Note that this can only be issued when the port is in disconnected state. And in order to disable this behavior on subsequent transitions, a warm reset should be issued. So add another entry to do that: echo > /sys/bus/usb/devices/2-0\:1.0/warm_reset In general these attributes can also be useful for other USB SuperSpeed compliance tests such as electrical and eye diagram testing which require CPn patterns to be transmitted. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
vdpa: add driver_override support driver_override allows to control which of the vDPA bus drivers binds to a vDPA device. If driver_override is not set, the previous behaviour is followed: devices use the first vDPA bus driver loaded (unless auto binding is disabled). Tested on Fedora 34 with driverctl(8): $ modprobe virtio-vdpa $ modprobe vhost-vdpa $ modprobe vdpa-sim-net $ vdpa dev add mgmtdev vdpasim_net name dev1 # dev1 is attached to the first vDPA bus driver loaded $ driverctl -b vdpa list-devices dev1 virtio_vdpa $ driverctl -b vdpa set-override dev1 vhost_vdpa $ driverctl -b vdpa list-devices dev1 vhost_vdpa [*] Note: driverctl(8) integrates with udev so the binding is preserved. Suggested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 4 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
vmbus: add driver_override support Add support for overriding the default driver for a VMBus device in the same way that it can be done for PCI devices. This patch adds the /sys/bus/vmbus/devices/.../driver_override file and the logic for matching. This is used by driverctl tool to do driver override. https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitlab.com%2Fdriverctl%2Fdriverctl&data=02%7C01%7Ckys%40microsoft.com%7C42e803feb2c544ef6ea908d5fd538878%7C72f988bf86f141af91ab2d7cd011db47%7C1%7C0%7C636693457619960040&sdata=kEyYHRIjNZCk%2B37moCSqbrZL426YccNQrsWpENcrZdw%3D&reserved=0 Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
docs: ABI: sysfs-c2port: remove a duplicated entry As warned by scripts/get_abi.pl: Warning: /sys/class/c2port/c2portX/flash_erase is defined 2 times: Documentation/ABI/testing/sysfs-c2port:60 Documentation/ABI/testing/sysfs-c2port:68 This entry was added twice at the same patch. Probalby a cut-and paste issue. Fixes: 4e17e1db9647 ("Add c2 port support") Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/4ea2b31ddc76161fbae004f2f2ed91dfb757703f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: Add sysfs ABI change for cfq's target latency. Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 14 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: sysfs-class-backlight: unify ambient light zone nodes ./scripts/get_abi.pl is warning about duplicated symbol definition: Warning: /sys/class/backlight/<backlight>/l1_daylight_max is defined 2 times: ./Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870:4 ./Documentation/ABI/testing/sysfs-class-backlight-adp8860:12 What happens is that 3 drivers use the same pattern to report max and dim setting for different ambient light zones. It should be noticed that the adp8870 doc was missing an entry for l1_daylight_dim, which was fixed on this patch. While the ambient light zone is device-specific, the sysfs definition is actually common. So, unify them at: Documentation/ABI/testing/sysfs-class-backlight and use as the contact point, the e-mail reported by get_maintainers.pl for the subsystem. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/c13c6ebd03cd04a0d15d89018f8d529918fc0a73.1621413933.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
backlight: lm3639: document sysfs attributes Add documentation for sysfs interfaces of Texas Instruments lm3639 backlight + flash led driver chip by looking through git commits and reading code. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 8 年前 | |
mm: document /sys/class/bdi/<bdi>/min_ratio_fine knob This documents the new /sys/class/bdi/<bdi>/max_ratio_fine knob. [akpm@linux-foundation.org: fix htmldocs warnings] Link: https://lkml.kernel.org/r/20221119005215.3052436-21-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Cc: Chris Mason <clm@meta.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
char/bsr: add sysfs interface documentation Descriptions have collected from code comments and by reading through code. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 8 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
mfd / platform: cros_ec: Move lightbar attributes to its own driver The entire way how cros sysfs attibutes are created is broken. cros_ec_lightbar should be its own driver and its attributes should be associated with a lightbar driver not the mfd driver. In order to retain the path, the lightbar attributes are attached to the cros_class. The patch also adds the sysfs documentation. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 7 年前 | |
mfd / platform: cros_ec: Move vbc attributes to its own driver The entire way how cros sysfs attibutes are created is broken. cros_ec_vbc should be its own driver and its attributes should be associated with a vbc driver not the mfd driver. In order to retain the path, the vbc attributes are attached to the cros_class. The patch also adds the sysfs documentation. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 7 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
PM / devfreq: Fix buffer overflow in trans_stat_show commit 08e23d05fa6dc4fc13da0ccf09defdd4bbc92ff4 upstream. Fix buffer overflow in trans_stat_show(). Convert simple snprintf to the more secure scnprintf with size of PAGE_SIZE. Add condition checking if we are exceeding PAGE_SIZE and exit early from loop. Also add at the end a warning that we exceeded PAGE_SIZE and that stats is disabled. Return -EFBIG in the case where we don't have enough space to write the full transition table. Also document in the ABI that this function can return -EFBIG error. Link: https://lore.kernel.org/all/20231024183016.14648-2-ansuelsmth@gmail.com/ Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218041 Fixes: e552bbaf5b98 ("PM / devfreq: Add sysfs node for representing frequency transition information.") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2 年前 | |
ABI: sysfs-class-devfreq-event: use the right wildcards on What On most ABI files, the wildcards are used as <x>, instead of (x). Replace it to make it using a more standard wildcard. That helps get_abi.pl to convert it into a regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3a0b6aa8f740c3dea78463f4256eafea6e973f92.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
driver core: Fix device link device name collision The device link device's name was of the form: <supplier-dev-name>--<consumer-dev-name> This can cause name collision as reported here [1] as device names are not globally unique. Since device names have to be unique within the bus/class, add the bus/class name as a prefix to the device names used to construct the device link device name. So the devuce link device's name will be of the form: <supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name> [1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/ Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Cc: stable@vger.kernel.org Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: sysfs-class-extcon: use uppercase X for wildcards Uppercase letters X, Y and Z are handled as wildcards by scripts/get_abi.pl. We can't do that with lowercase letters, as they're used everywhere. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/2dfd3f80cea2d0501f6451f2e66000b00fda3346.1632994837.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
scsi: documentation: Document Fibre Channel sysfs node for appid Update documentation for sysfs node within /sys/class/fc/fc_udev_device/. Link: https://lore.kernel.org/r/20210913015853.2086512-1-muneendra.kumar@broadcom.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 4 年前 | |
scsi: fc: Update documentation of sysfs nodes for FPIN stats Update documentation for sysfs nodes within: /sys/class/fc_host /sys/class/fc_remote_ports Link: https://lore.kernel.org/r/20201021092715.22669-6-njavali@marvell.com Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 5 年前 | |
scsi: fc: Update documentation of sysfs nodes for FPIN stats Update documentation for sysfs nodes within: /sys/class/fc_host /sys/class/fc_remote_ports Link: https://lore.kernel.org/r/20201021092715.22669-6-njavali@marvell.com Reviewed-by: James Smart <james.smart@broadcom.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> | 5 年前 | |
firmware_loader: Update contact emails for ABI docs Update the firmware_loader documentation and corresponding section in the MAINTAINERs file with a new email address. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Link: https://lore.kernel.org/r/20230929151326.311959-1-russell.h.weight@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2 年前 | |
platform/x86: hp-bioscfg: Documentation Update sysfs-class-firmware-attributes with hp-bioscfg information HP BIOS Configuration driver purpose is to provide a driver supporting the latest sysfs class firmware attributes framework allowing the user to change BIOS settings and security solutions on HP Inc.’s commercial notebooks. Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20230608163319.18934-2-jorge.lopez2@hp.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
add sysfs document for fpga bridge class Add documentation for new FPGA bridge class's sysfs interface. Signed-off-by: Alan Tull <atull@opensource.altera.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 9 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
fpga: region: add compat_id support This patch introduces a compat_id pointer member and sysfs interface for each fpga region, similar as compat_id for fpga manager, it allows applications to read the per region compat_id for compatibility checking before other actions on this fpga-region (e.g. PR). Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
ABI: sysfs-class-gnss: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/80b7f60a6bac7bb1938d60dca509d75dff3c2c62.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-class-hwmon: add a description for fanY_fault Document existing fanY_fault attribute. Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com> Link: https://lore.kernel.org/r/20221130200846.4226-3-nick.hawkins@hpe.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> | 3 年前 | |
platform/x86: Intel PMT Crashlog capability driver Add support for the Intel Platform Monitoring Technology crashlog interface. This interface provides a few sysfs values to allow for controlling the crashlog telemetry interface as well as a character driver to allow for mapping the crashlog memory region so that it can be accessed after a crashlog has been recorded. This driver is meant to only support the server version of the crashlog which is identified as crash_type 1 with a version of zero. Currently no other types are supported. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
iommu: Add sysfs support for IOMMUs IOMMUs currently have no common representation to userspace, most seem to have no representation at all aside from a few printks on bootup. There are however features of IOMMUs that are useful to know about. For instance the IOMMU might support superpages, making use of processor large/huge pages more important in a device assignment scenario. It's also useful to create cross links between devices and IOMMU hardware units, so that users might be able to load balance their devices to avoid thrashing a single hardware unit. This patch adds a device create and destroy interface as well as device linking, making it very lightweight for an IOMMU driver to add basic support. IOMMU drivers can provide additional attributes automatically by using an attribute_group. The attributes exposed are expected to be relatively device specific, the means to retrieve them certainly are, so there are currently no common attributes for the new class created here. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 11 年前 | |
iommu/amd: Add sysfs support AMD-Vi support for IOMMU sysfs. This allows us to associate devices with a specific IOMMU device and examine the capabilities and features of that IOMMU. The AMD IOMMU is hosted on and actual PCI device, so we make that device the parent for the IOMMU class device. This initial implementaiton exposes only the capability header and extended features register for the IOMMU. # find /sys | grep ivhd /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:00.0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:02.0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:04.0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:09.0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:11.0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:12.0 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:12.2 /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/devices/0000:00:13.0 ... /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/power /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/power/control ... /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/device /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/subsystem /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/amd-iommu /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/amd-iommu/cap /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/amd-iommu/features /sys/devices/pci0000:00/0000:00:00.2/iommu/ivhd0/uevent /sys/class/iommu/ivhd0 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 11 年前 | |
iommu/vt-d: Make use of IOMMU sysfs support Register our DRHD IOMMUs, cross link devices, and provide a base set of attributes for the IOMMU. Note that IRQ remapping support parses the DMAR table very early in boot, well before the iommu_class can reasonably be setup, so our registration is split between intel_iommu_init(), which occurs later, and alloc_iommu(), which typically occurs much earlier, but may happen at any time later with IOMMU hot-add support. On a typical desktop system, this provides the following (pruned): $ find /sys | grep dmar /sys/devices/virtual/iommu/dmar0 /sys/devices/virtual/iommu/dmar0/devices /sys/devices/virtual/iommu/dmar0/devices/0000:00:02.0 /sys/devices/virtual/iommu/dmar0/intel-iommu /sys/devices/virtual/iommu/dmar0/intel-iommu/cap /sys/devices/virtual/iommu/dmar0/intel-iommu/ecap /sys/devices/virtual/iommu/dmar0/intel-iommu/address /sys/devices/virtual/iommu/dmar0/intel-iommu/version /sys/devices/virtual/iommu/dmar1 /sys/devices/virtual/iommu/dmar1/devices /sys/devices/virtual/iommu/dmar1/devices/0000:00:00.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:01.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:16.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1a.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1b.0 /sys/devices/virtual/iommu/dmar1/devices/0000:00:1c.0 ... /sys/devices/virtual/iommu/dmar1/intel-iommu /sys/devices/virtual/iommu/dmar1/intel-iommu/cap /sys/devices/virtual/iommu/dmar1/intel-iommu/ecap /sys/devices/virtual/iommu/dmar1/intel-iommu/address /sys/devices/virtual/iommu/dmar1/intel-iommu/version /sys/class/iommu/dmar0 /sys/class/iommu/dmar1 (devices also link back to the dmar units) This makes address, version, capabilities, and extended capabilities available, just like printed on boot. I've tried not to duplicate data that can be found in the DMAR table, with the exception of the address, which provides an easy way to associate the sysfs device with a DRHD entry in the DMAR. It's tempting to add scopes and RMRR data here, but the full DMAR table is already exposed under /sys/firmware/ and therefore already provides a way for userspace to learn such details. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> | 11 年前 | |
video/lcd: document sysfs interface Date and KernelVersion may be wrong because the lcd interface was introduced before git initial import. Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com> | 16 年前 | |
leds: led-triggers: Improvements for default trigger mainline inclusion from mainline-v6.16-rc1 commit 06d99fcf1f87d5b6bf1c7dd0f7ec422304a47f31 category: feature bugzilla: https://github.com/RVCK-Project/rvck/issues/71 -------------------------------- Accept "default" written to sysfs trigger attr. If the text "default" is written to the LED's sysfs 'trigger' attr, then call led_trigger_set_default() to set the LED to its default trigger. If the default trigger is set to "none", then led_trigger_set_default() will remove a trigger. This is in contrast to the default trigger being unset, in which case led_trigger_set_default() does nothing. Signed-off-by: Craig McQueen <craig@mcqueen.au> Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Link: https://lore.kernel.org/r/20250317022630.424015-1-craig@mcqueen.au Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jia Wang <wangjia@ultrarisc.com> | 7 个月前 | |
leds: Add AW20xx driver This commit adds support for AWINIC AW20036/AW20054/AW20072 LED driver. This driver supports following AW200XX features: - Individual 64-level DIM currents Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20230519130403.212479-3-mmkurbanov@sberdevices.ru Signed-off-by: Lee Jones <lee@kernel.org> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
treewide: change my e-mail address, fix my name Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: unify /sys/class/leds/<led>/brightness documentation This ABI is defined twice, one for normal leds and another one for multicolor ones. Ensure that just one definition is there at ABI. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/1115022e7f172b19ee8610f2ad28cc2f0ca93592.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: sysfs-class-led-trigger-netdev: Document now hidable link_* mainline inclusion from mainline-v6.9-rc1 commit 5fe5e2a3d75d18d762b23c49e18ac91bd19a626e category: feature bugzilla: https://github.com/RVCK-Project/rvck/issues/71 -------------------------------- Document now hidable link speed modes for the LED netdev trigger. Link speed modes are now showed only if the named network device supports them and are hidden if not. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240111160501.1774-2-ansuelsmth@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Jia Wang <wangjia@ultrarisc.com> | 7 个月前 | |
Documentation: move oneshot trigger attributes documentation to ABI Documentation of sysfs interface should be in ABI in the first place. This moves relevant part of documentation and mentions where to look for it. Fix trivial typos whilst we are at it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> | 9 年前 | |
docs: ABI: sysfs-class-led-trigger-pattern: remove repeat duplication As reported by scripts/get_abi.pl: Warning: /sys/class/leds/<led>/repeat is defined 2 times: Documentation/ABI/testing/sysfs-class-led-driver-el15203000:0 Documentation/ABI/testing/sysfs-class-led-trigger-pattern:28 The definition for the EL15203000 is just a special case of the sysfs led class. So, drop it and mentions the possible exception at the class definition. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/394580bd2e007ffb640f97212973a772ed8f0409.1621413933.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
leds: trigger: implement a tty trigger Usage is as follows: myled=ledname tty=ttyS0 echo tty > /sys/class/leds/$myled/trigger echo $tty > /sys/class/leds/$myled/ttyname . When this new trigger is active it periodically checks the tty's statistics and when it changed since the last check the led is flashed once. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210113173018.bq2fkea2o3yp6rf6@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: sysfs-class-mei: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3789f936a637f1b4059400099ae7a592cd4df8f5.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-class-mic: use the right wildcards on What definitions On most ABI files, the wildcards are used as <x>, instead of (x). Replace it to make it using a more standard wildcard. That helps get_abi.pl to convert it into a regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/d0713698c609410506f9e520fa879c0592a5e11d.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
ABI: sysfs-class-mux: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/7e8ff8601d5b44b76c5c7f77b6dcf3b1d45bc5be.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
net: dsa: allow changing the tag protocol via the "tagging" device attribute Currently DSA exposes the following sysfs: $ cat /sys/class/net/eno2/dsa/tagging ocelot which is a read-only device attribute, introduced in the kernel as commit 98cdb4807123 ("net: dsa: Expose tagging protocol to user-space"), and used by libpcap since its commit 993db3800d7d ("Add support for DSA link-layer types"). It would be nice if we could extend this device attribute by making it writable: $ echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging This is useful with DSA switches that can make use of more than one tagging protocol. It may be useful in dsa_loop in the future too, to perform offline testing of various taggers, or for changing between dsa and edsa on Marvell switches, if that is desirable. In terms of implementation, drivers can support this feature by implementing .change_tag_protocol, which should always leave the switch in a consistent state: either with the new protocol if things went well, or with the old one if something failed. Teardown of the old protocol, if necessary, must be handled by the driver. Some things remain as before: - The .get_tag_protocol is currently only called at probe time, to load the initial tagging protocol driver. Nonetheless, new drivers should report the tagging protocol in current use now. - The driver should manage by itself the initial setup of tagging protocol, no later than the .setup() method, as well as destroying resources used by the last tagger in use, no earlier than the .teardown() method. For multi-switch DSA trees, error handling is a bit more complicated, since e.g. the 5th out of 7 switches may fail to change the tag protocol. When that happens, a revert to the original tag protocol is attempted, but that may fail too, leaving the tree in an inconsistent state despite each individual switch implementing .change_tag_protocol transactionally. Since the intersection between drivers that implement .change_tag_protocol and drivers that support D in DSA is currently the empty set, the possibility for this error to happen is ignored for now. Testing: $ insmod mscc_felix.ko [ 79.549784] mscc_felix 0000:00:00.5: Adding to iommu group 14 [ 79.565712] mscc_felix 0000:00:00.5: Failed to register DSA switch: -517 $ insmod tag_ocelot.ko $ rmmod mscc_felix.ko $ insmod mscc_felix.ko [ 97.261724] libphy: VSC9959 internal MDIO bus: probed [ 97.267363] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 0 [ 97.274998] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 1 [ 97.282561] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 2 [ 97.289700] mscc_felix 0000:00:00.5: Found PCS at internal MDIO address 3 [ 97.599163] mscc_felix 0000:00:00.5 swp0 (uninitialized): PHY [0000:00:00.3:10] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.862034] mscc_felix 0000:00:00.5 swp1 (uninitialized): PHY [0000:00:00.3:11] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 97.950731] mscc_felix 0000:00:00.5 swp0: configuring for inband/qsgmii link mode [ 97.964278] 8021q: adding VLAN 0 to HW filter on device swp0 [ 98.146161] mscc_felix 0000:00:00.5 swp2 (uninitialized): PHY [0000:00:00.3:12] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.238649] mscc_felix 0000:00:00.5 swp1: configuring for inband/qsgmii link mode [ 98.251845] 8021q: adding VLAN 0 to HW filter on device swp1 [ 98.433916] mscc_felix 0000:00:00.5 swp3 (uninitialized): PHY [0000:00:00.3:13] driver [Microsemi GE VSC8514 SyncE] (irq=POLL) [ 98.485542] mscc_felix 0000:00:00.5: configuring for fixed/internal link mode [ 98.503584] mscc_felix 0000:00:00.5: Link is Up - 2.5Gbps/Full - flow control rx/tx [ 98.527948] device eno2 entered promiscuous mode [ 98.544755] DSA: tree 0 setup $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=2.337 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.754 ms ^C - 10.0.0.1 ping statistics - 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max = 0.754/1.545/2.337 ms $ cat /sys/class/net/eno2/dsa/tagging ocelot $ cat ./test_ocelot_8021q.sh #!/bin/bash ip link set swp0 down ip link set swp1 down ip link set swp2 down ip link set swp3 down ip link set swp5 down ip link set eno2 down echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging ip link set eno2 up ip link set swp0 up ip link set swp1 up ip link set swp2 up ip link set swp3 up ip link set swp5 up $ ./test_ocelot_8021q.sh ./test_ocelot_8021q.sh: line 9: echo: write error: Protocol not available $ rmmod tag_ocelot.ko rmmod: can't unload module 'tag_ocelot': Resource temporarily unavailable $ insmod tag_ocelot_8021q.ko $ ./test_ocelot_8021q.sh $ cat /sys/class/net/eno2/dsa/tagging ocelot-8021q $ rmmod tag_ocelot.ko $ rmmod tag_ocelot_8021q.ko rmmod: can't unload module 'tag_ocelot_8021q': Resource temporarily unavailable $ ping 10.0.0.1 PING 10.0.0.1 (10.0.0.1): 56 data bytes 64 bytes from 10.0.0.1: seq=0 ttl=64 time=0.953 ms 64 bytes from 10.0.0.1: seq=1 ttl=64 time=0.787 ms 64 bytes from 10.0.0.1: seq=2 ttl=64 time=0.771 ms $ rmmod mscc_felix.ko [ 645.544426] mscc_felix 0000:00:00.5: Link is Down [ 645.838608] DSA: tree 0 torn down $ rmmod tag_ocelot_8021q.ko Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 5 年前 | |
can: grcan: Add device driver for GRCAN and GRHCAN cores This driver supports GRCAN and CRHCAN CAN controllers available in the GRLIB VHDL IP core library. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 13 年前 | |
can: janz-ican3: add support for CAL/CANopen firmware In our department we are using some older Janz ICAN3-modules in our dekstop pcs. There we have slightly different carrier boards than the janz-cmodio supported in the kernel sources, called CAN-PCI2 with two submodules. But the pci configuration regions are identical. So extending the supported pci devices to the corresponding device ids is sufficient to get the drivers working. * The old ICAN3-modules with firmware 1.28 need more then 250ms for the restart after reset. I've increased the timeout to 500ms. * The janz_ican3 module uses the raw can services of the Janz-firmware, this means firmware must be ICANOS/2. Our ICAN3-modules are equipped with CAL/CANopen-firmware, so I must use the appropriate commands for the layer management services. Te driver detects the firmware after module reset and selects the commands matching the firmware. This affects the bus on/off-command (ican3_set_bus_state) and the configuration of the bittiming (ican3_set_bittiming). For better diagnostics the detected firmware string is presented as sysfs attribute (fwinfo). Signed-off-by: Andreas Gröger <andreas24groeger@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 11 年前 | |
can: peak_usb: export PCAN CAN channel ID as sysfs device attribute This patch exports the CAN channel ID as a sysfs attribute. The CAN channel ID is a user-configurable u8/u32 identifier that can be set individually for each CAN interface of a PEAK USB device. Exporting the channel ID as a sysfs attribute allows users to easily read the ID and to write udev rules that can match against the ID. This is especially useful for PEAK USB devices that do not export a serial number at SUB level. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Lukas Magel <lukas.magel@posteo.net> Link: https://lore.kernel.org/all/20230116200932.157769-7-lukas.magel@posteo.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> | 3 年前 | |
net: phy: Expose phydev::dev_flags through sysfs phydev::dev_flags contains a bitmask of configuration bits requested by the consumer of a PHY device (Ethernet MAC or switch) towards the PHY driver. Since these flags are often used for requesting LED or other type of configuration being able to quickly audit them without instrumenting the kernel is useful. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
Documentation: ABI: sysfs-class-net-qmi: pass_through contact update Switch to the quicinc.com id. Fixes: bd1af6b5fffd ("Documentation: ABI: sysfs-class-net-qmi: document pass-through file") Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 3 年前 | |
net: sysfs: Fix /sys/class/net/<iface> path [ Upstream commit ae3f4b44641dfff969604735a0dcbf931f383285 ] The documentation is pointing to the wrong path for the interface. Documentation is pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>. Fix it by adding the net/ directory before the interface. Fixes: 1a02ef76acfa ("net: sysfs: add documentation entries for /sys/class/<iface>/queues") Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://lore.kernel.org/r/20240131102150.728960-2-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> | 2 年前 | |
net: sysfs: Fix /sys/class/net/<iface> path for statistics [ Upstream commit 5b3fbd61b9d1f4ed2db95aaf03f9adae0373784d ] The Documentation/ABI/testing/sysfs-class-net-statistics documentation is pointing to the wrong path for the interface. Documentation is pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>. Fix it by adding the net/ directory before the interface. Fixes: 6044f9700645 ("net: sysfs: document /sys/class/net/statistics/*") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> | 2 年前 | |
docs: ABI: fix syntax to be parsed using ReST notation There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Revert "pktcdvd: remove driver." This reverts commit f40eb99897af665f11858dd7b56edcb62c3f3c67. There are apparently still users out there of this driver. While we'd love to remove it to ease the maintenance burden, let's reinstate it for now until better (userspace) solutions can be developed. Link: https://lore.kernel.org/lkml/20230104190115.ceglfefco475ev6c@pali/ Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 3 年前 | |
ABI: testing: sysfs-class-power: Document absence of "present" property Document how the absence of the "present" property in the sysfs power_supply class should be handled. Link: https://gitlab.freedesktop.org/upower/upower/-/merge_requests/173 Cc: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 3 年前 | |
power/supply: Add ltc4162-l-charger Add support for the LTC4162-L Li-Ion battery charger. The driver allows reading back telemetry and to set some charging options like the input current limit. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: power: rt9467: Document exported sysfs entries Document the settings exported by rt9467 charger driver through sysfs entries: - sysoff_enable Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com> [update kernel version and date] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 3 年前 | |
Documentation: power: rt9471: Document exported sysfs entries Document the settings exported by rt9471 charger driver through sysfs entries: - sysoff_enable - port_detect_enable Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> [update kernel version and date] Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 3 年前 | |
power: supply: Add battery driver for Surface Aggregator Module On newer Microsoft Surface models (specifically 7th-generation, i.e. Surface Pro 7, Surface Book 3, Surface Laptop 3, and Surface Laptop Go), battery and AC status/information is no longer handled via standard ACPI devices, but instead directly via the Surface System Aggregator Module (SSAM), i.e. the embedded controller on those devices. While on previous generation models, battery status is also handled via SSAM, an ACPI shim was present to translate the standard ACPI battery interface to SSAM requests. The SSAM interface itself, which is modeled closely after the ACPI interface, has not changed. This commit introduces a new SSAM client device driver to support battery status/information via the aforementioned interface on said Surface models. It is in parts based on the standard ACPI battery driver. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
Merge tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when make tools/pci_install PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ... | 7 年前 | |
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address Going forward, I'll be using my kernel.org for upstream work. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220714112533.539910-5-lee@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-class-rapidio: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/aa073b85ab04b5b201d40f747ccdb6806f38eb66.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-class-rc: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/42778ca4b2f9bf73fafecb9b388a8fcd0e66be26.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ABI: sysfs-class-rc-nuvoton: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/8cfb786e625bfe8f1c73837cf76107af187c9d85.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
regulator: core: Add error flags to sysfs attributes If a regulator provides a get_error_flags() operation, its sysfs attributes will now include an entry for each defined REGULATOR_ERROR_* flag. Signed-off-by: Zev Weiss <zev@bewilderbeest.net> Link: https://lore.kernel.org/r/20220504065252.6955-3-zev@bewilderbeest.net Signed-off-by: Mark Brown <broonie@kernel.org> | 4 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
Documentation/ABI/rnbd-clt: Add description for nr_poll_queues describe how to set nr_poll_queues and enable the polling Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Link: https://lore.kernel.org/r/20210419073722.15351-15-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk> | 5 年前 | |
Documentation/ABI/rnbd-srv: add document for force_close describe force_close of device Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> | 5 年前 | |
rtc: Add RTC range Add a way for drivers to inform the core of the supported date/time range. The core can then check whether the date/time or alarm is in the range before calling ->set_time, ->set_mmss or ->set_alarm. It returns -ERANGE when the time is out of range. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> | 8 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
sysfs docs: ABI: Fix typo in comment Fix typo in the comment Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721020623.20974-1-slark_xiao@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
sysfs docs: ABI: Fix typo in comment Fix typo in the comment Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721020623.20974-1-slark_xiao@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
st: implement tape statistics This patch implements tape statistics in the st module via sysfs. Current no statistics are available for tape I/O and there is no easy way to reuse the block layer statistics for tape as tape is a character device and does not have perform I/O in sector sized chunks (the size of the data written to tape can change). For tapes we also need extra stats related to things like tape movement (via other I/O). There have been multiple end users requesting statistics including AT&T (and some HP customers who have not given permission to be named). It is impossible for them to investigate any issues related to tape performance in a non-invasive way. [jejb: eliminate PRId64] Signed-off-by: Shane Seymour <shane.seymour@hp.com> Tested-by: Shane Seymour <shane.seymour@hp.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com> | 11 年前 | |
nvmem: prepare basics for FRAM support Added enum and string for FRAM (ferroelectric RAM) to expose it as file named "fram". Added documentation of sysfs file. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Link: https://lore.kernel.org/r/20210611094601.95131-2-jiri.prchal@aksignal.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
stm class: Support devices that override software assigned masters Some STM devices adjust software assigned master numbers depending on the trace source and its runtime state and whatnot. This patch adds a sysfs attribute to inform the trace-side software that master numbers assigned to software sources will not match those in the STP stream, so that, for example, master/channel allocation policy can be adjusted accordingly. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 10 年前 | |
stm class: Introduce an abstraction for System Trace Module devices A System Trace Module (STM) is a device exporting data in System Trace Protocol (STP) format as defined by MIPI STP standards. Examples of such devices are Intel(R) Trace Hub and Coresight STM. This abstraction provides a unified interface for software trace sources to send their data over an STM device to a debug host. In order to do that, such a trace source needs to be assigned a pair of master/channel identifiers that all the data from this source will be tagged with. The STP decoder on the debug host side will use these master/channel tags to distinguish different trace streams from one another inside one STP stream. This abstraction provides a configfs-based policy management mechanism for dynamic allocation of these master/channel pairs based on trace source-supplied string identifier. It has the flexibility of being defined at runtime and at the same time (provided that the policy definition is aligned with the decoding end) consistency. For userspace trace sources, this abstraction provides write()-based and mmap()-based (if the underlying stm device allows this) output mechanism. For kernel-side trace sources, we provide "stm_source" device class that can be connected to an stm device at run time. Cc: linux-api@vger.kernel.org Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 10 年前 | |
docs: driver-api: add a series of orphaned documents There are lots of documents under Documentation/*.txt and a few other orphan documents elsehwere that belong to the driver-API book. Move them to their right place. Reviewed-by: Cornelia Huck <cohuck@redhat.com> # vfio-related parts Acked-by: Logan Gunthorpe <logang@deltatee.com> # switchtec Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 7 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
usb: typec: USB Power Delivery helpers for ports and partners All the USB Type-C Connector Class devices are protected, so the drivers can not directly access them. This will adds a few helpers that can be used to link the ports and partners to the correct USB Power Delivery objects. For ports a new optional sysfs attribute file is also added that can be used to select the USB Power Delivery capabilities that the port will advertise to the partner. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220502132058.86236-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
usb: typec: pd: Add higher capability sysfs for sink PDO 28th bit of fixed supply sink PDO represents higher capability. When this bit is set, the sink device needs more than vsafe5V (eg: 12 V) to provide full functionality. This patch adds this higher capability sysfs interface for sink PDO. 28th bit of fixed supply source PDO represents usb_suspend_supported attribute. This usb_suspend_supported sysfs is already exposed for source PDOs. This patch adds 'source-capabilities' in usb_suspend_supported sysfs documentation for additional clarity. Signed-off-by: Saranya Gopal <saranya.gopal@intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230214114543.205103-2-saranya.gopal@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
usb: common: Small class for USB role switches USB role switch is a device that can be used to choose the data role for USB connector. With dual-role capable USB controllers, the controller itself will be the switch, but on some platforms the USB host and device controllers are separate IPs and there is a mux between them and the connector. On those platforms the mux driver will need to register the switch. With USB Type-C connectors, the host-to-device relationship is negotiated over the Configuration Channel (CC). That means the USB Type-C drivers need to be in control of the role switch. The class provides a simple API for the USB Type-C drivers for the control. For other types of USB connectors (mainly microAB) the class provides user space control via sysfs attribute file that can be used to request role swapping from the switch. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
Docs/ABI/testing: Add VDUSE sysfs interface ABI document This adds missing documentation for VDUSE sysfs interface ABI under Documentation/ABI/testing. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20220524115143.187-1-xieyongji@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
PM / wakeup: Show wakeup sources stats in sysfs Add an ID and a device pointer to 'struct wakeup_source'. Use them to to expose wakeup sources statistics in sysfs under /sys/class/wakeup/wakeup<ID>/*. Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Tri Vo <trong@android.com> Tested-by: Kalesh Singh <kaleshsingh@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 6 年前 | |
watchdog: report options in sysfs This synchronizes the information reported by ioctl and sysfs. The mismatch is confusing because "wdctl" from util-linux uses the ioctl when used with root privileges and sysfs without. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221216-watchdog-sysfs-v2-2-6189311103a9@weissschuh.net [groeck: Fixed continuation line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> | 3 年前 | |
zram: add dynamic device add/remove functionality We currently don't support on-demand device creation. The one and only way to have N zram devices is to specify num_devices module parameter (default value: 1). IOW if, for some reason, at some point, user wants to have N + 1 devies he/she must umount all the existing devices, unload the module, load the module passing num_devices equals to N + 1. And do this again, if needed. This patch introduces zram control sysfs class, which has two sysfs attrs: - hot_add -- add a new zram device - hot_remove -- remove a specific (device_id) zram device hot_add sysfs attr is read-only and has only automatic device id assignment mode (as requested by Minchan Kim). read operation performed on this attr creates a new zram device and returns back its device_id or error status. Usage example: # add a new specific zram device cat /sys/class/zram-control/hot_add 2 # remove a specific zram device echo 4 > /sys/class/zram-control/hot_remove Returning zram_add() error code back to user (-ENOMEM in this case) cat /sys/class/zram-control/hot_add cat: /sys/class/zram-control/hot_add: Cannot allocate memory NOTE, there might be users who already depend on the fact that at least zram0 device gets always created by zram_init(). Preserve this behavior. [minchan@kernel.org: use zram->claim to avoid lockdep splat] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
driver-core: documentation: fix up Greg's email address My old email address was used in a lot of documentation files, so fix this up to point to the correct one now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 14 年前 | |
driver core: Fix device link device name collision The device link device's name was of the form: <supplier-dev-name>--<consumer-dev-name> This can cause name collision as reported here [1] as device names are not globally unique. Since device names have to be unique within the bus/class, add the bus/class name as a prefix to the device names used to construct the device link device name. So the devuce link device's name will be of the form: <supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name> [1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/ Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Cc: stable@vger.kernel.org Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
sysfs: add attribute specification for /sysfs/devices/.../coredump This patch adds the specification for /sysfs/devices/.../coredump which allows user-space to trigger a device coredump obtaining binary data from the device for (fault) analysis. It relies on CONFIG_DEV_COREDUMP being enabled. Signed-off-by: Arend van Spriel <aspriel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
media: update/fix my e-mail on some places There are two places pointing to an unexisting "m.chehab@kernel.org" email. I never had such email, so, I'm unsure how it ends there. Anyway, it is plain wrong. While here, use my canonical e-mail on a bunch of places that are pointing to another e-mail. The idea is that, from now on, all places will be pointing to the same SMTP server. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> | 8 年前 | |
ACPI: Add new sysfs interface to export device description Add support to export the device description obtained from the ACPI _STR method, if one exists for a device, to user-space via a sysfs interface. This new interface provides a standard and platform neutral way for users to obtain the description text stored in the ACPI _STR method. If no _STR method exists for the device, no sysfs 'description' file will be created. The 'description' file will be located in the /sys/devices/ directory using the device's path. /sys/device/<bus>/<bridge path>/<device path>.../firmware_node/description Example: /sys/devices/pci0000:00/0000:00.07.0/0000:0e:00.0/firmware_node/description It can also be located using the ACPI device path, for example: /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/PNP0A08:00/device:13/device:15/description /sys/devices/LNXSYSTM:00/device:00/ACPI0004:00/ACPI0004:01/ACPI0007:02/description Execute the 'cat' command on the 'description' file to obtain the description string for that device. This patch also includes documentation describing how the new sysfs interface works Changes from v1-v2 based on comments by Len Brown and Fengguang Wu * Removed output "No Description" and leaving a NULL attribute if the _STR method failed to evaluate. * In acpi_device_remove_files() removed the redundent check of dev->pnp.str_obj before calling free. This check triggered a message from smatch. Signed-off-by: Lance Ortiz <lance.ortiz@hp.com> Signed-off-by: Len Brown <len.brown@intel.com> | 13 年前 | |
hwtracing: hisi_ptt: Export available filters through sysfs The PTT can only filter the traced TLP headers by the Root Ports or the Requester ID of the Endpoint, which are located on the same PCIe core of the PTT device. The filter value used is derived from the BDF number of the supported Root Port or the Endpoint. It's not friendly enough for the users since it requires the user to be familiar enough with the platform and calculate the filter value manually. This patch export the available filters through sysfs. Each available filters is presented as an individual file with the name of the BDF number of the related PCIe device. The files are created under $(PTT PMU dir)/available_root_port_filters and $(PTT PMU dir)/available_requester_filters respectively. The filter value can be known by reading the related file. Then the users can easily know the available filters for trace and get the filter values without calculating. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20230621092804.15120-4-yangyicong@huawei.com | 3 年前 | |
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 13 年前 | |
perf/x86/intel/uncore: Update sysfs-devices-mapping file Add description for /sys/devices/uncore_upi_*/die* attributes to sysfs-devices-mapping. Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20221117122833.3103580-11-alexander.antonov@linux.intel.com | 3 年前 | |
crash: memory and CPU hotplug sysfs attributes Introduce the crash_hotplug attribute for memory and CPUs for use by userspace. These attributes directly facilitate the udev rule for managing userspace re-loading of the crash kernel upon hot un/plug changes. For memory, expose the crash_hotplug attribute to the /sys/devices/system/memory directory. For example: # udevadm info --attribute-walk /sys/devices/system/memory/memory81 looking at device '/devices/system/memory/memory81': KERNEL=="memory81" SUBSYSTEM=="memory" DRIVER=="" ATTR{online}=="1" ATTR{phys_device}=="0" ATTR{phys_index}=="00000051" ATTR{removable}=="1" ATTR{state}=="online" ATTR{valid_zones}=="Movable" looking at parent device '/devices/system/memory': KERNELS=="memory" SUBSYSTEMS=="" DRIVERS=="" ATTRS{auto_online_blocks}=="offline" ATTRS{block_size_bytes}=="8000000" ATTRS{crash_hotplug}=="1" For CPUs, expose the crash_hotplug attribute to the /sys/devices/system/cpu directory. For example: # udevadm info --attribute-walk /sys/devices/system/cpu/cpu0 looking at device '/devices/system/cpu/cpu0': KERNEL=="cpu0" SUBSYSTEM=="cpu" DRIVER=="processor" ATTR{crash_notes}=="277c38600" ATTR{crash_notes_size}=="368" ATTR{online}=="1" looking at parent device '/devices/system/cpu': KERNELS=="cpu" SUBSYSTEMS=="" DRIVERS=="" ATTRS{crash_hotplug}=="1" ATTRS{isolated}=="" ATTRS{kernel_max}=="8191" ATTRS{nohz_full}==" (null)" ATTRS{offline}=="4-7" ATTRS{online}=="0-3" ATTRS{possible}=="0-7" ATTRS{present}=="0-3" With these sysfs attributes in place, it is possible to efficiently instruct the udev rule to skip crash kernel reloading for kernels configured with crash hotplug support. For example, the following is the proposed udev rule change for RHEL system 98-kexec.rules (as the first lines of the rule file): # The kernel updates the crash elfcorehdr for CPU and memory changes SUBSYSTEM=="cpu", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" SUBSYSTEM=="memory", ATTRS{crash_hotplug}=="1", GOTO="kdump_reload_end" When examined in the context of 98-kexec.rules, the above rules test if crash_hotplug is set, and if so, the userspace initiated unload-then-reload of the crash kernel is skipped. CPU and memory checks are separated in accordance with CONFIG_HOTPLUG_CPU and CONFIG_MEMORY_HOTPLUG kernel config options. If an architecture supports, for example, memory hotplug but not CPU hotplug, then the /sys/devices/system/memory/crash_hotplug attribute file is present, but the /sys/devices/system/cpu/crash_hotplug attribute file will NOT be present. Thus the udev rule skips userspace processing of memory hot un/plug events, but the udev rule will evaluate false for CPU events, thus allowing userspace to process CPU hot un/plug events (ie the unload-then-reload of the kdump capture kernel). Link: https://lkml.kernel.org/r/20230814214446.6659-5-eric.devolder@oracle.com Signed-off-by: Eric DeVolder <eric.devolder@oracle.com> Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Akhil Raj <lf32.dev@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Young <dyoung@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Sean Christopherson <seanjc@google.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Weißschuh <linux@weissschuh.net> Cc: Valentin Schneider <vschneid@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org> | 15 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
driver core: Add sysfs support for physical location of a device When ACPI table includes _PLD fields for a device, create a new directory (physical_location) in sysfs to share _PLD fields. Currently without PLD information, when there are multiple of same devices, it is hard to distinguish which device corresponds to which physical device at which location. For example, when there are two Type C connectors, it is hard to find out which connector corresponds to the Type C port on the left panel versus the Type C port on the right panel. With PLD information provided, we can determine which specific device at which location is doing what. _PLD output includes much more fields, but only generic fields are added and exposed to sysfs, so that non-ACPI devices can also support it in the future. The minimal generic fields needed for locating a device are the following. - panel - vertical_position - horizontal_position - dock - lid Signed-off-by: Won Chung <wonchung@google.com> Link: https://lore.kernel.org/r/20220314195458.271430-1-wonchung@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
sysfs docs: ABI: Fix typo in comment Fix typo in the comment Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721020623.20974-1-slark_xiao@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: sysfs-devices-platform-dock: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/56790ba596b34c234da1e0d17ca7f19435df87ff.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
doc: soc: hisilicon: Add Kunpeng HCCS driver documentation Document the sysfs attributes description provided by HCCS driver on Kunpeng SoC. Signed-off-by: Huisong Li <lihuisong@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
net: ipa: add an endpoint device attribute group Create a new attribute group meant to provide a single place that defines endpoint IDs that might be needed by user space. Not all defined endpoints are presented, and only those that are defined will be made visible. The new attributes use "extended" device attributes to hold endpoint IDs, which is a little more compact and efficient. Reimplement the existing modem endpoint ID attribute files using common code. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220719191639.373249-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 4 年前 | |
docs: ABI: fix syntax to be parsed using ReST notation There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Input: trackpoint: document sysfs interface Descriptions have been collected from git commit logs, code commits and the TrackPoint System Version 4.0 Engineering Specification. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 8 年前 | |
sysfs docs: ABI: Fix typo in comment Fix typo in the comment Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220721020623.20974-1-slark_xiao@163.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ACPI / PM: Expose lists of device power resources to user space Since ACPI power resources are going to be used more extensively on new hardware platforms, it is necessary to allow user space (powertop in particular) to look at the lists of power resources corresponding to different power states of devices for diagnostics and control purposes. For this reason, for each power state of an ACPI device node using power resources create a special attribute group under the device node's directory in sysfs containing links to sysfs directories representing the power resources in that list. The names of the new attribute groups are "power_resources_<state>", where <state> is the state name i.e. "D0", "D1", "D2", or "D3hot". Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
ACPI / PM: Expose lists of device power resources to user space Since ACPI power resources are going to be used more extensively on new hardware platforms, it is necessary to allow user space (powertop in particular) to look at the lists of power resources corresponding to different power states of devices for diagnostics and control purposes. For this reason, for each power state of an ACPI device node using power resources create a special attribute group under the device node's directory in sysfs containing links to sysfs directories representing the power resources in that list. The names of the new attribute groups are "power_resources_<state>", where <state> is the state name i.e. "D0", "D1", "D2", or "D3hot". Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
ACPI / PM: Expose lists of device power resources to user space Since ACPI power resources are going to be used more extensively on new hardware platforms, it is necessary to allow user space (powertop in particular) to look at the lists of power resources corresponding to different power states of devices for diagnostics and control purposes. For this reason, for each power state of an ACPI device node using power resources create a special attribute group under the device node's directory in sysfs containing links to sysfs directories representing the power resources in that list. The names of the new attribute groups are "power_resources_<state>", where <state> is the state name i.e. "D0", "D1", "D2", or "D3hot". Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
ACPI / PM: Expose lists of device power resources to user space Since ACPI power resources are going to be used more extensively on new hardware platforms, it is necessary to allow user space (powertop in particular) to look at the lists of power resources corresponding to different power states of devices for diagnostics and control purposes. For this reason, for each power state of an ACPI device node using power resources create a special attribute group under the device node's directory in sysfs containing links to sysfs directories representing the power resources in that list. The names of the new attribute groups are "power_resources_<state>", where <state> is the state name i.e. "D0", "D1", "D2", or "D3hot". Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
ACPI / PM: Expose lists of device wakeup power resources to user space Commit 18a3870 (ACPI / PM: Expose lists of device power resources to user space) exposed the lists of ACPI power resources associated with power states of ACPI devices, but it didn't expose the lists of ACPI wakeup power resources, which also is necessary to get the full picture of dependencies between ACPI devices and power resources. For this reason, for every ACPI device node having a list of ACPI wakeup power resources associated with it, expose that list to user space in analogy with commit 18a3870. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 13 年前 | |
ACPI / PM: Expose power states of ACPI devices to user space Make it possible to retrieve the current power state of a device with ACPI power management from user space via sysfs by adding two new attributes, power_state and real_power_state, to the sysfs directory associated with the struct acpi_device object representing the device's ACPI node. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
ACPI / PM: Expose power states of ACPI devices to user space Make it possible to retrieve the current power state of a device with ACPI power management from user space via sysfs by adding two new attributes, power_state and real_power_state, to the sysfs directory associated with the struct acpi_device object representing the device's ACPI node. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
ABI: sysfs-devices-removable: make a table valid as ReST markup Changeset 70f400d4d957 ("driver core: Move the "removable" attribute from USB to core") added a table to the file, but not using a valid ReST format. Change it to avoid build issues when producing documentation with "make htmldocs". Fixes: 70f400d4d957 ("driver core: Move the "removable" attribute from USB to core") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/bf83354747b8abaa486fe03af4be2826363469cb.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
ACPI / PM: Expose current status of ACPI power resources Since ACPI power resources are going to be used more extensively on new hardware platforms, it becomes necessary for user space (powertop in particular) to observe some properties of those resources for diagnostics purposes. For this reason, expose the current status of each ACPI power resource to user space via sysfs by adding a new resource_in_use attribute to the sysfs directory representing the given power resource. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 13 年前 | |
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address Going forward, I'll be using my kernel.org for upstream work. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220714112533.539910-6-lee@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
drivers: base: Introducing software nodes to the firmware node framework Software node is a new struct fwnode_handle type that can be used to describe devices in kernel (software). It is meant to complement fwnodes representing real firmware nodes when they are incomplete (for example missing device properties) and to supply the primary fwnode when the firmware lacks hardware description for a device completely. The software node type is really meant to replace the currently used "property_set" struct fwnode_handle type. The handling of struct property_set is glued to the generic device property handling code, and it is not possible to create a struct property_set independently from the device that it is bind to. struct property_set is only created when device properties are added to already initialized struct device, and control of it is only possible from the generic property handling code. Software nodes are instead designed to be created independently from the device entries (struct device). It makes them much more flexible, as then the device meant to be bind to the node can be created at a later time, and from another location. It is also possible to bind multiple devices to a single software node if needed. The software node implementation also includes support for node hierarchy, which was the main motivation for this commit. The node hierarchy was something that was requested for the struct property_set, but it did not seem reasonable to try to extend the property_set support for that purpose. struct property_set was really meant only for device property handling like the name suggests. Support for struct property_set is not yet removed in this commit, but it will be in the following one. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 7 年前 | |
driver core: Make state_synced device attribute writeable If the file is written to and sync_state() hasn't been called for the device yet, then call sync_state() for the device independent of the state of its consumers. This is useful for supplier devices that have one or more consumers that don't have a driver but the consumers are in a state that don't use the resources supplied by the supplier device. This gives finer grained control than using the fw_devlink.sync_state=timeout kernel commandline parameter. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20230304005355.746421-3-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
ACPI: Add sysfs ABI documentation Add initial ABI documentation for ACPI devices' sysfs interfaces. Contacts information fields are filled with current ACPI maintainer and the relevant authors are carbon copied. [rjw: Use my e-mail address that's likely to be valid longer.] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 12 年前 | |
driver core: Fix device link device name collision The device link device's name was of the form: <supplier-dev-name>--<consumer-dev-name> This can cause name collision as reported here [1] as device names are not globally unique. Since device names have to be unique within the bus/class, add the bus/class name as a prefix to the device names used to construct the device link device name. So the devuce link device's name will be of the form: <supplier-bus-name>:<supplier-dev-name>--<consumer-bus-name>:<consumer-dev-name> [1] - https://lore.kernel.org/lkml/20201229033440.32142-1-michael@walle.cc/ Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs") Cc: stable@vger.kernel.org Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210110175408.1465657-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
cpufreq: CPPC: Support for auto act window and energy perf in cppc_cpufreq commit c4ba198c5c002c06a6bd49c5a5520c01fef890b5 openEuler Add sysfs interfaces for CPPC auto act window and energy perf in the cppc_cpufreq driver. Signed-off-by: hepeng <hepeng68@huawei.com> Signed-off-by: zhaolichang <943677312@qq.com> Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn> | 7 个月前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
xen/pcpu: Xen physical cpus online/offline sys interface This patch provide Xen physical cpus online/offline sys interface. User can use it for their own purpose, like power saving: by offlining some cpus when light workload it save power greatly. Its basic workflow is, user online/offline cpu via sys interface, then hypercall xen to implement, after done xen inject virq back to dom0, and then dom0 sync cpu status. Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com> Signed-off-by: Liu, Jinsong <jinsong.liu@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 13 年前 | |
vfio: Add struct device to vfio_device and replace kref. With it a 'vfio-dev/vfioX' node is created under the sysfs path of the parent, indicating the device is bound to a vfio driver, e.g.: /sys/devices/pci0000\:6f/0000\:6f\:01.0/vfio-dev/vfio0 It is also a preparatory step toward adding cdev for supporting future device-oriented uAPI. Add Documentation/ABI/testing/sysfs-devices-vfio-dev. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20220921104401.38898-16-kevin.tian@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 3 年前 | |
driver core: Add waiting_for_supplier sysfs file for devices This would be useful to check if a device is not probing because it's waiting for a supplier to be added and then linked to before it can probe. To reduce sysfs clutter, this file is added only if it can ever be 1. So, if fw_devlink is disabled or set to permissive, this file is not added. Also, this file is removed once the device probes as it's no longer relevant. Signed-off-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20200521191800.136035-4-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 6 年前 | |
xen/events: add per-xenbus device event statistics and settings Add syfs nodes for each xenbus device showing event statistics (number of events and spurious events, number of associated event channels) and for setting a spurious event threshold in case a frontend is sending too many events without being rogue on purpose. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210219154030.10892-7-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> | 5 年前 | |
ABI: Fix KernelVersion tags It is "KernelVersion:" and not "Kernel Version:". Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
docs/ABI: testing: aspeed-uart-routing: Escape asterisk Escape asterisk symbols to fix the following warning: "WARNING: Inline emphasis start-string without end-string" Fixes: c6807970c3bc ("soc: aspeed: Add UART routing support") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20220124014351.9121-1-chiawei_wang@aspeedtech.com Link: https://lore.kernel.org/r/20220201070027.196314-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 4 年前 | |
dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference Changeset 983b62975e90 ("dt-bindings: mfd: bd9571mwv: Convert to json-schema") renamed: Documentation/devicetree/bindings/mfd/bd9571mwv.txt to: Documentation/devicetree/bindings/mfd/rohm,bd9571mwv.yaml. Update its cross-reference accordingly. Fixes: 983b62975e90 ("dt-bindings: mfd: bd9571mwv: Convert to json-schema") Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1906a4d935eab57c10ce09358eae02175ce4abb7.1654529011.git.mchehab@kernel.org | 4 年前 | |
crypto: ccp - Add support for displaying PSP firmware versions As it's not always obvious what PSP bootloader or TEE version are present in OEM systems, add the ability to get this information from sysfs for supported platforms. Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> | 3 年前 | |
platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER element->buffer.pointer should be binary blob. %s doesn't work perfect for them. Print hex string for ACPI_TYPE_BUFFER. Also update the documentation to reflect this. Fixes: 0a4cad9c11ad ("platform/chrome: Add ChromeOS ACPI device driver") Cc: stable@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230803011245.3773756-1-tzungbi@kernel.org Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> | 3 年前 | |
usb: misc: eud: Fix eud sysfs path (use 'qcom_eud') The eud sysfs enablement path is currently mentioned in the Documentation as: /sys/bus/platform/drivers/eud/.../enable Instead it should be: /sys/bus/platform/drivers/qcom_eud/.../enable Fix the same. Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Link: https://lore.kernel.org/r/20230517211756.2483552-2-bhupesh.sharma@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
fsi: master-gpio: Add external mode This change introduces an 'external mode' for GPIO-based FSI masters, allowing the clock and data lines to be driven by an external source. For example, external mode is selected by a user when an external debug device is attached to the FSI pins. To do this, we need to set specific states for the trans, mux and enable GPIOs, and prevent access to clk & data from the FSI core code (by returning EBUSY). External mode is controlled by a sysfs attribute, so add the relevant information to Documentation/ABI/ Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 8 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
habanalabs: Fix list of /sys/class/habanalabs/hl<n>/status Stephen Rothwell reported htmldocs warnings when merging accel tree: Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation. Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/ABI/testing/sysfs-driver-habanalabs:201: ERROR: Unexpected indentation. Documentation/ABI/testing/sysfs-driver-habanalabs:201: WARNING: Block quote ends without a blank line; unexpected unindent. Fix these by fixing alignment of list of card status returned by /sys/class/habanalabs/hl<n>/status. Link: https://lore.kernel.org/linux-next/20230120130634.61c3e857@canb.auug.org.au/ Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> | 3 年前 | |
ABI: sysfs-driver-hid: the "What" field doesn't parse fine The What: field on this ABI description use a different syntax than expected, causing it to not be properly parsed by script. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
HID: corsair: Add Corsair Vengeance K90 driver This patch implements a HID driver for the Corsair Vengeance K90 keyboard. It fixes the behaviour of the keys using incorrect HID usage codes and exposes the macro playback mode and current profile to the user space through sysfs attributes. It also adds two LED class devices controlling the "record" LED and the backlight. Signed-off-by: Clément Vuchener <clement.vuchener@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 10 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
HID: logitech-hidpp: document sysfs interface Descriptions have been collected from git commit logs. Signed-off-by: Aishwarya Pant <aishpant@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 8 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
HID: multitouch: create sysfs attribute to control quirks from user-space Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 14 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: fix common spelling mistakes This fixes several spelling mistakes in the Documentation/ tree, which are caught by checkpatch.pl's spell checking. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 10 年前 | |
HID: Prodikeys PC-MIDI HID Driver A specialised HID driver for the Creative Prodikeys PC-MIDI USB Keyboard. The Prodikeys PC-MIDI is a multifunction keyboard comprising a qwerty keyboard, multimedia keys and a touch sensitive musical keyboard. The specialised HID driver adds full support for the musical keyboard and extra multimedia keys which are not currently handled by the default HID driver. The specialised HID driver interfaces with ALSA, and presents the midi keyboard as a rawmidi device. Sustain duration, octave shifting and the midi output channel can be read/written form userspace via sysfs. Signed-off-by: Don Prince <dhprince-devel@yahoo.co.uk> ALSA parts: Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 16 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
USB: HID: Steelseries SRW-S1 Add support controlling all LEDs simultaneously This patch to the SRW-S1 driver adds the ability to control all LEDs simultaneously as testing showed that it was slow (noticably!!) when seting or clearing all the LEDs in turn. It adds a 'RPMALL' LED, whose behavoir is asserted to all the LEDs in the bar graph, individual LEDs can subsequently be turned on/off individually. Signed-off-by: Simon Wood <simon@mungewell.org> Tested-by: John Murphy <rosegardener@freeode.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz> | 13 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Input: add driver for AXP20x Power Enable Key This change adds support for the Power Enable Key found on MFD AXP202 and AXP209. Besides the basic support for the button, the driver adds two entries in sysfs to configure the time delay for power on/off. Signed-off-by: Carlo Caione <carlo@caione.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [wens@csie.org: made axp20x_pek_remove() static; removed driver owner field; fixed path for sysfs entries] Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 11 年前 | |
Input: cros-ec-keyb - expose function row physical map to userspace The top-row keys in a keyboard usually have dual functionalities. E.g. A function key "F1" is also an action key "Browser back". Therefore, when an application receives an action key code from a top-row key press, the application needs to know how to correlate the action key code with the function key code and do the conversion whenever necessary. Since the userpace already knows the key scanlines (row/column) associated with a received key code. Essentially, the userspace only needs a mapping between the key row/column and the matching physical location in the top row. So, enhance the cros-ec-keyb driver to create such a mapping and expose it to userspace in the form of a function_row_physmap attribute. The attribute would be a space separated ordered list of row/column codes for the keys in the function row, in a left-to-right order. The attribute will only be present when the device has a custom design for the top-row keys. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210115122412.v7.2.I6542d7d9d0b246e7079bb16b41e697b2ac4b4e39@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 5 年前 | |
Input: exc3000 - add type sysfs attribute Add a sysfs attribute to query the type of the touchscreen device. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20210125182527.1225245-5-l.stach@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 5 年前 | |
platform/x86: BIOS SAR driver for Intel M.2 Modem Dynamic BIOS SAR driver exposing dynamic SAR information from BIOS The Dynamic SAR (Specific Absorption Rate) driver uses ACPI DSM (Device Specific Method) to communicate with BIOS and retrieve dynamic SAR information and change notifications. The driver uses sysfs to expose this data to userspace via read and notify. Sysfs interface is documented in detail under: Documentation/ABI/testing/sysfs-driver-intc_sar Signed-off-by: Shravan S <s.shravan@intel.com> Link: https://lore.kernel.org/r/20210723211452.27995-2-s.shravan@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 4 年前 | |
drm/i915/hwmon: Use 0 to designate disabled PL1 power limit On ATSM the PL1 limit is disabled at power up. The previous uapi assumed that the PL1 limit is always enabled and therefore did not have a notion of a disabled PL1 limit. This results in erroneous PL1 limit values when the PL1 limit is disabled. For example at power up, the disabled ATSM PL1 limit was previously shown as 0 which means a low PL1 limit whereas the limit being disabled actually implies a high effective PL1 limit value. To get round this problem, the PL1 limit uapi is expanded to include a special value 0 to designate a disabled PL1 limit. A read value of 0 means that the PL1 power limit is disabled, writing 0 disables the limit. The link between this patch and the bugs mentioned below is as follows: * Because on ATSM the PL1 power limit is disabled on power up and there were no means to enable it, we previously implemented the means to enable the limit when the PL1 hwmon entry (power1_max) was written to. * Now there is a IGT igt@i915_hwmon@hwmon_write which (a) reads orig value from all hwmon sysfs (b) does a bunch of random writes and finally (c) restores the orig value read. On ATSM since the orig value is 0, when the IGT restores the 0 value, the PL1 limit is now enabled with a value of 0. * PL1 limit of 0 implies a low PL1 limit which causes GPU freq to fall to 100 MHz. This causes GuC FW load and several IGT's to start timing out and gives rise to these Intel CI bugs. After this patch, writing 0 would disable the PL1 limit instead of enabling it, avoiding the freq drop issue. v2: Add explanation for bugs mentioned below (Rodrigo) v3: Eliminate race during PL1 disable and verify (Tvrtko) Change return to -ENODEV if verify fails (Tvrtko) Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8062 Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8060 Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230401024146.1826092-1-ashutosh.dixit@intel.com | 3 年前 | |
mfd: intel-m10-bmc: Add PMCI driver Add the mfd driver for the Platform Management Component Interface (PMCI) based interface of Intel MAX10 BMC controller. PMCI is a software-visible interface, connected to card BMC which provided the basic functionality of read/write BMC register. The access to the register is done indirectly via a hardware controller/bridge that handles read/write/clear commands and acknowledgments for the commands. Previously, intel-m10-bmc provided sysfs under /sys/bus/spi/devices/... which is generalized in this change because not all MAX10 BMC appear under SPI anymore. Co-developed-by: Tianfei zhang <tianfei.zhang@intel.com> Signed-off-by: Tianfei zhang <tianfei.zhang@intel.com> Co-developed-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Russ Weight <russell.h.weight@intel.com> Co-developed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Reviewed-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230116100845.6153-11-ilpo.jarvinen@linux.intel.com | 3 年前 | |
fpga: m10bmc-sec: Change contact for secure update driver Change the maintainer for the Intel MAX10 BMC Secure Update driver from Russ Weight to Peter Colberg. Update the ABI documentation contact information as well. Signed-off-by: Russ Weight <russell.h.weight@intel.com> Acked-by: Peter Colberg <peter.colberg@intel.com> Link: https://lore.kernel.org/r/20230928164753.278684-1-russell.h.weight@intel.com Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com> Link: https://lore.kernel.org/r/20231023032857.902699-2-yilun.xu@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2 年前 | |
Add support driver for Intel Rapid Start Technology Intel Rapid Start Technology is a firmware-based suspend-to-disk implementation. Once placed in S3, the device will wake once either a timeout elapses or the battery reaches a critical level. It will then resume to the firmware and copy the contents of RAM to a specialised partition, and then power off the machine. If the user turns the machine back on the firmware will copy the contents of the partition back to RAM and then resume from S3 as normal. This driver provides an interface for configuring the wakeup events and timeout. It still requires firmware support and an appropriate suspend partition. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> | 12 年前 | |
platform/x86/intel/sdsi: Add meter certificate support Add support for reading the meter certificate from Intel On Demand hardware. The meter certificate [1] is used to access the utilization metrics of enabled features in support of the Intel On Demand consumption model. Similar to the state certificate, the meter certificate is read by mailbox command. While making similar changes also use the BIN_ATTR_ADMIN_RO helper to create the 'registers' sysfs file. Link: https://github.com/intel-sandbox/debox1.intel_sdsi/blob/gnr-review/meter-certificate.rst [1] Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20221119002343.1281885-5-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: Fix KernelVersion tags It is "KernelVersion:" and not "Kernel Version:". Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
Documentation: qat: fix auto_reset attribute details The auto_reset attribute was introduced in kernel 6.9. Fix version and date in documentation. Fixes: f5419a4239af ("crypto: qat - add auto reset on error") Signed-off-by: Damian Muszynski <damian.muszynski@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit d26cb4f53dab654d337595cd247e6c435b571ca7) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 13 天前 | |
crypto: qat - add error counters commit 532d7f6bc458 ("crypto: qat - add error counters") upstream Introduce ras counters interface for counting QAT specific device errors and expose them through the newly created qat_ras sysfs group attribute. This adds the following attributes: - errors_correctable: number of correctable errors - errors_nonfatal: number of uncorrectable non fatal errors - errors_fatal: number of uncorrectable fatal errors - reset_error_counters: resets all counters These counters are initialized during device bring up and cleared during device shutdown and are applicable only to QAT GEN4 devices. Intel-SIG: commit 532d7f6bc458 ("crypto: qat - add error counters)" Backport to support Intel QAT in-tree driver Signed-off-by: Shashank Gupta <shashank.gupta@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ Aichun Shi: amend commit log ] Signed-off-by: Aichun Shi <aichun.shi@intel.com> | 1 年前 | |
crypto: qat - add rate limiting sysfs interface commit db74e1625819 ("crypto: qat - add rate limiting sysfs interface") upstream Add an interface for the rate limiting feature which allows to add, remove and modify a QAT SLA (Service Level Agreement). This adds a new sysfs attribute group, qat_rl, which can be accessed from /sys/bus/pci/devices/<BUS:DEV:FUNCTION> with the following hierarchy: |-+ qat_rl |---- id (RW) # SLA identifier |---- cir (RW) # Committed Information Rate |---- pir (RW) # Peak Information Rate |---- srv (RW) # Service to be rate limited |---- rp (RW) (HEX) # Ring pairs to be rate limited |---- cap_rem (RW) # Remaining capability for a service |---- sla_op (WO) # Allows to perform an operation on an SLA The API works by setting the appropriate RW attributes and then issuing a command through the sla_op. For example, to create an SLA, a user needs to input the necessary data into the attributes cir, pir, srv and rp and then write into sla_op the command add to execute the operation. The API also provides cap_rem attribute to get information about the remaining device capability within a certain service which is required when setting an SLA. Intel-SIG: commit db74e1625819 ("crypto: qat - add rate limiting sysfs interface)" Backport to support Intel QAT in-tree driver Signed-off-by: Ciunas Bennett <ciunas.bennett@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Damian Muszynski <damian.muszynski@intel.com> Reviewed-by: Tero Kristo <tero.kristo@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> [ Aichun Shi: amend commit log ] Signed-off-by: Aichun Shi <aichun.shi@intel.com> | 1 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
spi: intel: Add protected and locked attributes The manufacturing access to the PCH/SoC SPI device is traditionally performed via userspace driver accessing registers via /dev/mem but due to security concerns /dev/mem access is being much restricted, hence the reason for utilizing dedicated Intel PCH/SoC SPI controller driver, which is already implemented in the Linux kernel. Intel PCH/SoC SPI controller protects the flash storage via two mechanisms one is the via region protection registers and second via BIOS lock. The BIOS locks only the BIOS regions usually 0 and/or 6. The device always boots with BIOS lock set, but during manufacturing the BIOS lock has to be lifted in order to enable the write access. This can be done by passing "writeable=1" in the command line when the driver is loaded. This "locked" state is exposed through new sysfs attributes (intel_spi_locked, intel_spi_bios_locked). Second, also the region protection status is exposed via sysfs attribute (intel_spi_protected) as the manufacturing will need the both files in order to validate that the device is properly sealed. Signed-off-by: Tamar Mashiah <tamar.mashiah@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: WangYuli <wangyuli@uniontech.com> | 2 年前 | |
ABI: Fix KernelVersion tags It is "KernelVersion:" and not "Kernel Version:". Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
usb: typec: altmodes/displayport: Add hpd sysfs attribute Exporsing HotPlugDetect(HPD) helps userspace to infer HPD state as defined by VESA DisplayPort Alt Mode on USB Type-C Standard. This allows userspace to notify users for self help, for instance, to hint user that the display port cable is probably detached (or) the display port sink (viz., monitors ect.,) is un-powered. Also helps to debug issues reported from field. This change adds an additional attribute "hpd" to the existing "displayport" attributes. VESA DisplayPort Alt Mode on USB Type-C Standard defines how HotPlugDetect(HPD) shall be supported on the USB-C connector when operating in DisplayPort Alt Mode. This is a read only node which reflects the current state of HPD. Valid values: - 1 when HPD’s logical state is high (HPD_High) - 0 when HPD’s logical state is low (HPD_Low) Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20221211193755.1392128-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
Documentation: add the device isolation feature sysfs nodes for uacce Update documentation describing sysfs node that could help to configure hardware error threshold for users in the user space. And describing sysfs node that could read the device isolated state. Signed-off-by: Kai Ye <yekai13@huawei.com> Link: https://lore.kernel.org/r/20221119074817.12063-3-yekai13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
usb: typec: ucsi: ccg: add firmware flashing support CCGx has two copies of the firmware in addition to the bootloader. If the device is running FW1, FW2 can be updated with the new version. Dual firmware mode allows the CCG device to stay in a PD contract and support USB PD and Type-C functionality while a firmware update is in progress. First we read the currently flashed firmware version of both primary and secondary firmware and then compare it with version of firmware file to determine if flashing is required. Command framework is added to support sending commands to CCGx controller. We wait for response after sending the command and then read the response from RAB_RESPONSE register. Below commands are supported, - ENTER_FLASHING - RESET - PDPORT_ENABLE - JUMP_TO_BOOT - FLASH_ROW_RW - VALIDATE_FW Command specific mutex lock is also added to sync between driver and user threads. PD port number information is added which is required while sending PD_PORT_ENABLE command Signed-off-by: Ajay Gupta <ajayg@nvidia.com> [ heikki: Added ABI documentation. ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
scsi: ufs: core: Fix spelling of a sysfs attribute name [ Upstream commit 021f243627ead17eb6500170256d3d9be787dad8 ] Change "resourse" into "resource" in the name of a sysfs attribute. Fixes: d829fc8a1058 ("scsi: ufs: sysfs: unit descriptor") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20250624181658.336035-1-bvanassche@acm.org Reviewed-by: Avri Altman <avri.altman@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit ee9cb28675a5d0a6c4471c083112b86e77798e35) | 1 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
w1: w1_therm: Rename conflicting sysfs attribute 'eeprom' to 'eeprom_cmd' Duplicate attribute 'eeprom' is defined in: 1) Documentation/ABI/testing/sysfs-driver-w1_therm 2) Documentation/ABI/stable/sysfs-driver-w1_ds28e04 Both drivers define an attribute: /sys/bus/w1/devices/.../eeprom with conflicting behavior. Fix by renaming the newer one in w1_therm.c to 'eeprom_cmd'. Reported-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/lkml/20201029152845.6bbb39ce@coco.lan/ Signed-off-by: Ivan Zaentsev <ivan.zaentsev@wirenboard.ru> Link: https://lore.kernel.org/r/20201112064931.8471-1-ivan.zaentsev@wirenboard.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: Add sysfs documentation interface of dw-xdata-pcie driver This patch describes the sysfs interface implemented on the dw-xdata-pcie driver. Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Link: https://lore.kernel.org/r/438c4ca9f6cc9e1cb29a65c0d2cca9a3d3f181b1.1617016509.git.gustavo.pimentel@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
xen-blkback: Apply 'feature_persistent' parameter when connect In some use cases[1], the backend is created while the frontend doesn't support the persistent grants feature, but later the frontend can be changed to support the feature and reconnect. In the past, 'blkback' enabled the persistent grants feature since it unconditionally checked if frontend supports the persistent grants feature for every connect ('connect_ring()') and decided whether it should use persistent grans or not. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has mistakenly changed the behavior. It made the frontend feature support check to not be repeated once it shown the 'feature_persistent' as 'false', or the frontend doesn't support persistent grants. This commit changes the behavior of the parameter to make effect for every connect, so that the previous workflow can work again as expected. [1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/ Reported-by: Andrii Chepurnyi <andrii.chepurnyi82@gmail.com> Fixes: aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-3-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> | 4 年前 | |
xen-blkfront: Apply 'feature_persistent' parameter when connect In some use cases[1], the backend is created while the frontend doesn't support the persistent grants feature, but later the frontend can be changed to support the feature and reconnect. In the past, 'blkback' enabled the persistent grants feature since it unconditionally checked if frontend supports the persistent grants feature for every connect ('connect_ring()') and decided whether it should use persistent grans or not. However, commit aac8a70db24b ("xen-blkback: add a parameter for disabling of persistent grants") has mistakenly changed the behavior. It made the frontend feature support check to not be repeated once it shown the 'feature_persistent' as 'false', or the frontend doesn't support persistent grants. Similar behavioral change has made on 'blkfront' by commit 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants"). This commit changes the behavior of the parameter to make effect for every connect, so that the previous behavior of 'blkfront' can be restored. [1] https://lore.kernel.org/xen-devel/CAJwUmVB6H3iTs-C+U=v-pwJB7-_ZRHPxHzKRJZ22xEPW7z8a=g@mail.gmail.com/ Fixes: 74a852479c68 ("xen-blkfront: add a parameter for disabling of persistent grants") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220715225108.193398-4-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com> | 4 年前 | |
drivers: misc: Add Support for TMR Manager Triple Modular Redundancy(TMR) subsystem contains three microblaze cores, subsystem is fault-tolerant and continues to operate nominally after encountering an error. Together with the capability to detect and recover from errors, the implementation ensures the reliability of the entire subsystem. TMR Manager is responsible for performing recovery of the subsystem detects the fault via a break signal it invokes microblaze software break handler which calls the tmr manager driver api to update the error count and status, added support for fault detection feature via sysfs interface. Usage: To know the break handler count(Error count): cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt Signed-off-by: Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> Link: https://lore.kernel.org/r/20221125054113.122833-3-appana.durga.kedareswara.rao@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
fpga: zynqmp-fpga: Adds status interface Adds status interface for zynqmp-fpga. It's a read only interface which allows the user to get the Programmable Logic(PL) configuration status. Usage: To read the Programmable Logic(PL) configuration status. cat /sys/bus/platform/drivers/zynqmp_fpga_manager/firmware:zynqmp-firmware:pcap/status Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com> Acked-by: Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/20230224120738.329416-3-nava.kishore.manne@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
firmware: dmi_scan: add SBMIOS entry and DMI tables Some utils, like dmidecode and smbios, need to access SMBIOS entry table area in order to get information like SMBIOS version, size, etc. Currently it's done via /dev/mem. But for situation when /dev/mem usage is disabled, the utils have to use dmi sysfs instead, which doesn't represent SMBIOS entry and adds code/delay redundancy when direct access for table is needed. So this patch creates dmi/tables and adds SMBIOS entry point to allow utils in question to work correctly without /dev/mem. Also patch adds raw dmi table to simplify dmi table processing in user space, as proposed by Jean Delvare. Tested-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@globallogic.com> Signed-off-by: Jean Delvare <jdelvare@suse.de> | 11 年前 | |
efi: Export Runtime Configuration Interface table to sysfs System firmware advertises the address of the 'Runtime Configuration Interface table version 2 (RCI2)' via an EFI Configuration Table entry. This code retrieves the RCI2 table from the address and exports it to sysfs as a binary attribute 'rci2' under /sys/firmware/efi/tables directory. The approach adopted is similar to the attribute 'DMI' under /sys/firmware/dmi/tables. RCI2 table contains BIOS HII in XML format and is used to populate BIOS setup page in Dell EMC OpenManage Server Administrator tool. The BIOS setup page contains BIOS tokens which can be configured. Signed-off-by: Narendra K <Narendra.K@dell.com> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> | 6 年前 | |
ABI: sysfs-firmware-efi-esrt: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/44f63335333d019490297903609a8a1754a66183.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: ABI: Add /sys/firmware/lefi/boardinfo description for Loongson64 Add a description for /sys/firmware/lefi/boardinfo on the Loongson platform. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> | 5 年前 | |
driver: Google Memory Console This patch introduces the 'memconsole' driver. Our firmware gives us access to an in-memory log of the firmware's output. This gives us visibility in a data-center of headless machines as to what the firmware is doing. The memory console is found by the driver by finding a header block in the EBDA. The buffer is then copied out, and is exported to userland in the file /sys/firmware/log. Signed-off-by: San Mehat <san@google.com> Signed-off-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 15 年前 | |
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types. Compare with arch/x86/kernel/e820.c, types of memmap omitted some. So add. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Link: https://lore.kernel.org/r/20210623023126.104380-1-jianpeng.ma@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
of: document /sys/firmware/fdt Add ABI documentation for /sys/firmware/fdt Update contact email for /sys/firmware/devicetree/* and add mail list Signed-off-by: Frank Rowand <frank.rowand@sony.com> Acked-by: Grant Likely <grant.likely@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> | 9 年前 | |
powerpc/powernv: Add support for powercap framework Adds a generic powercap framework to change the system powercap inband through OPAL-OCC command/response interface. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 8 年前 | |
powerpc/powernv: Add support to set power-shifting-ratio This patch adds support to set power-shifting-ratio which hints the firmware how to distribute/throttle power between different entities in a system (e.g CPU v/s GPU). This ratio is used by OCC for power capping algorithm. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 8 年前 | |
powerpc/powernv: Add documentation for the opal sensor_groups sysfs interfaces Commit bf9571550f52 ("powerpc/powernv: Add support to clear sensor groups data") added a mechanism to clear sensor-group data via a sysfs interface. However, the ABI for that interface has not been documented. This patch documents the ABI for the sysfs interface for sensor-groups and clearing the sensor-groups. This patch was originally sent by Shilpasri G Bhat on the mailing list: https://lkml.org/lkml/2018/8/1/85 Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1574776274-22355-1-git-send-email-ego@linux.vnet.ibm.com | 6 年前 | |
powerpc/pseries: Interface to represent PAPR firmware attributes Adds a syscall interface to represent the energy and frequency related PAPR attributes on the system using the new H_CALL "H_GET_ENERGY_SCALE_INFO". H_GET_EM_PARMS H_CALL was previously responsible for exporting this information in the lparcfg, however the H_GET_EM_PARMS H_CALL will be deprecated P10 onwards. The H_GET_ENERGY_SCALE_INFO H_CALL is of the following call format: hcall( uint64 H_GET_ENERGY_SCALE_INFO, // Get energy scale info uint64 flags, // Per the flag request uint64 firstAttributeId,// The attribute id uint64 bufferAddress, // Guest physical address of the output buffer uint64 bufferSize // The size in bytes of the output buffer ); As specified in PAPR+ v2.11, section 14.14.3. This H_CALL can query either all the attributes at once with firstAttributeId = 0, flags = 0 as well as query only one attribute at a time with firstAttributeId = id, flags = 1. The output buffer consists of the following 1. number of attributes - 8 bytes 2. array offset to the data location - 8 bytes 3. version info - 1 byte 4. A data array of size num attributes, which contains the following: a. attribute ID - 8 bytes b. attribute value in number - 8 bytes c. attribute name in string - 64 bytes d. attribute value in string - 64 bytes The new H_CALL exports information in direct string value format, hence a new interface has been introduced in /sys/firmware/papr/energy_scale_info to export this information to userspace so that the firmware can add new values without the need for the kernel to be changed. The H_CALL returns the name, numeric value and string value (if exists) The format of exposing the sysfs information is as follows: /sys/firmware/papr/energy_scale_info/ |-- <id>/ |-- desc |-- value |-- value_desc (if exists) |-- <id>/ |-- desc |-- value |-- value_desc (if exists) ... The energy information that is exported is useful for userspace tools such as powerpc-utils. Currently these tools infer the "power_mode_data" value in the lparcfg, which in turn is obtained from the to be deprecated H_GET_EM_PARMS H_CALL. On future platforms, such userspace utilities will have to look at the data returned from the new H_CALL being populated in this new sysfs interface and report this information directly without the need of interpretation. Signed-off-by: Pratik R. Sampat <psampat@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220217105321.52941-2-psampat@linux.ibm.com | 4 年前 | |
docs: ABI: correct QEMU fw_cfg spec path A few weeks ago, QEMU switched docs/specs/fw_cfg.txt to be docs/specs/fw_cfg.rst, so update the reference in the kernel docs to reflect this. Also add a link to the online documentation to make it easier to find. Cc: Simon Sapin <simon.sapin@exyr.org> Cc: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220720123131.341755-1-Jason@zx2c4.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 4 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
treewide: change my e-mail address, fix my name Change my e-mail address to kabel@kernel.org, and fix my name in non-code parts (add diacritical mark). Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
Documentation/ABI: sysfs-fs-erofs: update supported features Add missing feaures for sysfs-fs-erofs feature doc. Signed-off-by: Yue Hu <huyue2@coolpad.com> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20230209051128.10571-1-zbestahu@gmail.com Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> | 3 年前 | |
docs: ABI: Drop trailing whitespace Remove all trailing whitespace from the ABI documentation. Most of it was introduced during recent updates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110144033.3278499-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
f2fs: fix to avoid use GC_AT when setting gc_mode as GC_URGENT_LOW or GC_URGENT_MID [ Upstream commit 296b8cb34e65fa93382cf919be5a056f719c9a26 ] If gc_mode is set to GC_URGENT_LOW or GC_URGENT_MID, cost benefit GC approach should be used, but if ATGC is enabled at the same time, Age-threshold approach will be selected, which can only do amount of GC and it is much less than the numbers of CB approach. some traces: f2fs_gc-254:48-396 [007] ..... 2311600.684028: f2fs_gc_begin: dev = (254,48), gc_type = Background GC, no_background_GC = 0, nr_free_secs = 0, nodes = 1053, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0 f2fs_gc-254:48-396 [007] ..... 2311600.684527: f2fs_get_victim: dev = (254,48), type = No TYPE, policy = (Background GC, LFS-mode, Age-threshold), victim = 10, cost = 4294364975, ofs_unit = 1, pre_victim_secno = -1, prefree = 0, free = 44898 f2fs_gc-254:48-396 [007] ..... 2311600.714835: f2fs_gc_end: dev = (254,48), ret = 0, seg_freed = 0, sec_freed = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0 f2fs_gc-254:48-396 [007] ..... 2311600.714843: f2fs_background_gc: dev = (254,48), wait_ms = 50, prefree = 0, free = 44898 f2fs_gc-254:48-396 [007] ..... 2311600.771785: f2fs_gc_begin: dev = (254,48), gc_type = Background GC, no_background_GC = 0, nr_free_secs = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg: f2fs_gc-254:48-396 [007] ..... 2311600.772275: f2fs_gc_end: dev = (254,48), ret = -61, seg_freed = 0, sec_freed = 0, nodes = 1562, dents = 2, imeta = 18, free_sec:44898, free_seg:44898, rsv_seg:239, prefree_seg:0 Fixes: 0e5e81114de1 ("f2fs: add GC_URGENT_LOW mode in gc_urgent") Fixes: d98af5f45520 ("f2fs: introduce gc_urgent_mid mode") Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit ed16873faf6af40d6de83676d89723d85ff4aaaa) | 1 年前 | |
nilfs2: add /sys/fs/nilfs2/<device>/mounted_snapshots/<snapshot> group This patch adds creation of <snapshot> group for every mounted snapshot in /sys/fs/nilfs2/<device>/mounted_snapshots group. The group contains details about mounted snapshot: (1) inodes_count - show number of inodes for snapshot. (2) blocks_count - show number of blocks for snapshot. Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 11 年前 | |
ubifs: Document sysfs nodes Add documentation for the new sysfs nodes /sys/fs/ubifs/ubiX_Y/errors_magic /sys/fs/ubifs/ubiX_Y/errors_node /sys/fs/ubifs/ubiX_Y/errors_crc Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Signed-off-by: Richard Weinberger <richard@nod.at> | 4 年前 | |
xfs: fix the contact address for the sysfs ABI documentation commit 9ff4490e2ab364ec433f15668ef3f5edfb53feca upstream. oss.sgi.com is long dead, refer to the current linux-xfs list instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> | 1 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ibft: Expose iBFT acpi header via sysfs Some ethernet adapter vendors are supplying products which support optional (payed license) features. On some adapters this includes a hardware iscsi initiator. The same adapters in a normal (no extra licenses) mode of operation can be used as a software iscsi initiator. In addition, software iscsi boot initiators are becoming a standard part of many vendors uefi implementations. This is creating difficulties during early boot/install determining the proper configuration method for these adapters when they are used as a boot device. The attached patch creates sysfs entries to expose information from the acpi header of the ibft table. This information allows for a method to easily determining if an ibft table was created by a ethernet card's firmware or the system uefi/bios. In the case of a hardware initiator this information in combination with the pci vendor and device id can be used to ascertain any vendor specific behaviors that need to be accommodated. Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: David Bond <dbond@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> | 10 年前 | |
kernels/ksysfs.c: export kernel address bits This can be used by userspace to determine the address size of the running kernel. It frees userspace from having to interpret this information from the UTS machine field. Userspace implementation: https://github.com/util-linux/util-linux/pull/1966 Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221221-address-bits-v1-1-8446b13244ac@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
bpf: Load and verify kernel module BTFs Add kernel module listener that will load/validate and unload module BTF. Module BTFs gets ID generated for them, which makes it possible to iterate them with existing BTF iteration API. They are given their respective module's names, which will get reported through GET_OBJ_INFO API. They are also marked as in-kernel BTFs for tooling to distinguish them from user-provided BTFs. Also, similarly to vmlinux BTF, kernel module BTFs are exposed through sysfs as /sys/kernel/btf/<module-name>. This is convenient for user-space tools to inspect module BTF contents and dump their types with existing tools: [vmuser@archvm bpf]$ ls -la /sys/kernel/btf total 0 drwxr-xr-x 2 root root 0 Nov 4 19:46 . drwxr-xr-x 13 root root 0 Nov 4 19:46 .. ... -r--r--r-- 1 root root 888 Nov 4 19:46 irqbypass -r--r--r-- 1 root root 100225 Nov 4 19:46 kvm -r--r--r-- 1 root root 35401 Nov 4 19:46 kvm_intel -r--r--r-- 1 root root 120 Nov 4 19:46 pcspkr -r--r--r-- 1 root root 399 Nov 4 19:46 serio_raw -r--r--r-- 1 root root 4094095 Nov 4 19:46 vmlinux Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/bpf/20201110011932.3201430-5-andrii@kernel.org | 5 年前 | |
kernel/ksysfs.c: export kernel cpu byteorder Certain files in procfs are formatted in byteorder-dependent formats. For example the IP addresses in /proc/net/udp. When using emulation like qemu-user, applications are not guaranteed to be using the same byteorder as the kernel. Therefore the kernel needs to provide a way for applications to discover the byteorder used in API-filesystems. Using systemcalls is not enough because these are intercepted and translated by the emulation. Also this makes it easier for non-compiled applications like shellscripts to discover the byteorder. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20221103152407.3348-1-linux@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
dma-buf: Delete the DMA-BUF attachment sysfs statistics The DMA-BUF attachment statistics form a subset of the DMA-BUF sysfs statistics that recently merged to the drm-misc tree. They are not UABI yet since they have not merged to the upstream Linux kernel. Since there has been a reported a performance regression due to the overhead of sysfs directory creation/teardown during dma_buf_attach()/dma_buf_detach(), this patch deletes the DMA-BUF attachment statistics from sysfs. Fixes: bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs") Signed-off-by: Hridya Valsaraju <hridya@google.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210713040742.2680135-1-hridya@google.com Signed-off-by: Christian König <christian.koenig@amd.com> | 5 年前 | |
powerpc/fadump: sysfs for fadump memory reservation Add a sys interface to allow querying the memory reserved by FADump for saving the crash dump. Also added Documentation/ABI for the new sysfs file. Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191211160910.21656-7-sourabhjain@linux.ibm.com | 6 年前 | |
ABI: fix some syntax issues at the ABI database On those three files, the ABI representation described at README are violated. - at sysfs-bus-iio-proximity-as3935: a ':' character is missing after "What" - at sysfs-class-devfreq: there's a typo at Description - at sysfs-class-cxl, it is using the ":" character at a file preamble, causing it to be misinterpreted as a tag. - On the other files, instead of "What", they use "Where". Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # cxl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
iommu: Cleanup iommu_change_dev_def_domain() As the singleton group limitation has been removed, cleanup the code in iommu_change_dev_def_domain() accordingly. Documentation is also updated. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230322064956.263419-7-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> | 3 年前 | |
genirq: Add wakeup sysfs node to show IRQ wakeup state Surprisingly there is no simple way to see if the IRQ line in question is wakeup source or not. Note that wakeup might be an OOB (out-of-band) source like GPIO line which makes things slightly more complicated. Add a sysfs node to cover this case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Tony Lindgren <tony@atomide.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Link: https://lkml.kernel.org/r/20180226155043.67937-1-andriy.shevchenko@linux.intel.com | 8 年前 | |
livepatch: add sysfs entry "patched" for each klp_object Add per klp_object sysfs entry "patched". It makes it easier to debug typos in the module name. Signed-off-by: Song Liu <song@kernel.org> Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com> [pmladek@suse.com: Updated kernel version when the sysfs file will be introduced] Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220902205208.3117798-2-song@kernel.org | 3 年前 | |
mm: create /sys/kernel/mm Add a kobject to create /sys/kernel/mm when sysfs is mounted. The kobject will exist regardless. This will allow for the hugepage related sysfs directories to exist under the mm "subsystem" directory. Add an ABI file appropriately. [kosaki.motohiro@jp.fujitsu.com: fix build] Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 年前 | |
mm: cma: support sysfs Since CMA is getting used more widely, it's more important to keep monitoring CMA statistics for system health since it's directly related to user experience. This patch introduces sysfs statistics for CMA, in order to provide some basic monitoring of the CMA allocator. * the number of CMA page successful allocations * the number of CMA page allocation failures These two values allow the user to calcuate the allocation failure rate for each CMA area. e.g.) /sys/kernel/mm/cma/WIFI/alloc_pages_[success|fail] /sys/kernel/mm/cma/SENSOR/alloc_pages_[success|fail] /sys/kernel/mm/cma/BLUETOOTH/alloc_pages_[success|fail] The cma_stat was intentionally allocated by dynamic allocation to harmonize with kobject lifetime management. https://lore.kernel.org/linux-mm/YCOAmXqt6dZkCQYs@kroah.com/ Link: https://lkml.kernel.org/r/20210324230759.2213957-1-minchan@kernel.org Link: https://lore.kernel.org/linux-mm/20210316100433.17665-1-colin.king@canonical.com/ Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Tested-by: Anders Roxell <anders.roxell@linaro.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: John Dias <joaodias@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
Merge tag 'docs-6.6' of git://git.lwn.net/linux Pull documentation updates from Jonathan Corbet: "Documentation work keeps chugging along; this includes: - Work from Carlos Bilbao to integrate rustdoc output into the generated HTML documentation. This took some work to figure out how to do it without slowing the docs build and without creating people who don't have Rust installed, but Carlos got there - Move the loongarch and mips architecture documentation under Documentation/arch/ - Some more maintainer documentation from Jakub ... plus the usual assortment of updates, translations, and fixes" * tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits) Docu: genericirq.rst: fix irq-example input: docs: pxrc: remove reference to phoenix-sim Documentation: serial-console: Fix literal block marker docs/mm: remove references to hmm_mirror ops and clean typos docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add() Documentation: Fix typos Documentation/ABI: Fix typos scripts: kernel-doc: fix macro handling in enums scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN] Documentation: riscv: Update boot image header since EFI stub is supported Documentation: riscv: Add early boot document Documentation: arm: Add bootargs to the table of added DT parameters docs: kernel-parameters: Refer to the correct bitmap function doc: update params of memhp_default_state= docs: Add book to process/kernel-docs.rst docs: sparse: fix invalid link addresses docs: vfs: clean up after the iterate() removal docs: Add a section on surveys to the researcher guidelines docs: move mips under arch docs: move loongarch under arch ... | 2 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
mm: add new KSM process and sysfs knobs This adds the general_profit KSM sysfs knob and the process profit metric knobs to ksm_stat. 1) expose general_profit metric The documentation mentions a general profit metric, however this metric is not calculated. In addition the formula depends on the size of internal structures, which makes it more difficult for an administrator to make the calculation. Adding the metric for a better user experience. 2) document general_profit sysfs knob 3) calculate ksm process profit metric The ksm documentation mentions the process profit metric and how to calculate it. This adds the calculation of the metric. 4) mm: expose ksm process profit metric in ksm_stat This exposes the ksm process profit metric in /proc/<pid>/ksm_stat. The documentation mentions the formula for the ksm process profit metric, however it does not calculate it. In addition the formula depends on the size of internal structures. So it makes sense to expose it. 5) document new procfs ksm knobs Link: https://lkml.kernel.org/r/20230418051342.1919757-3-shr@devkernel.io Signed-off-by: Stefan Roesch <shr@devkernel.io> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
memory tier, sysfs: rename attribute "nodes" to "nodelist" In sysfs, we use attribute name "cpumap" or "cpus" for cpu mask and "cpulist" or "cpus_list" for cpu list. For example, in my system, $ cat /sys/devices/system/node/node0/cpumap f,ffffffff $ cat /sys/devices/system/cpu/cpu2/topology/core_cpus 0,00100004 $ cat cat /sys/devices/system/node/node0/cpulist 0-35 $ cat /sys/devices/system/cpu/cpu2/topology/core_cpus_list 2,20 It looks reasonable to use "nodemap" for node mask and "nodelist" for node list. So, rename the attribute to follow the naming convention. Link: https://lkml.kernel.org/r/20221020015122.290097-1-ying.huang@intel.com Fixes: 9832fb87834e2b ("mm/demotion: expose memory tier details via sysfs") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Acked-by: Wei Xu <weixugc@google.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Cc: Alistair Popple <apopple@nvidia.com> Cc: Bharata B Rao <bharata@amd.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Hesham Almatary <hesham.almatary@huawei.com> Cc: Jagdish Gediya <jvgediya.oss@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Tim Chen <tim.c.chen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
mm/migrate: add sysfs interface to enable reclaim migration Some method is obviously needed to enable reclaim-based migration. Just like traditional autonuma, there will be some workloads that will benefit like workloads with more "static" configurations where hot pages stay hot and cold pages stay cold. If pages come and go from the hot and cold sets, the benefits of this approach will be more limited. The benefits are truly workload-based and *not* hardware-based. We do not believe that there is a viable threshold where certain hardware configurations should have this mechanism enabled while others do not. To be conservative, earlier work defaulted to disable reclaim- based migration and did not include a mechanism to enable it. This proposes add a new sysfs file /sys/kernel/mm/numa/demotion_enabled as a method to enable it. We are open to any alternative that allows end users to enable this mechanism or disable it if workload harm is detected (just like traditional autonuma). Once this is enabled page demotion may move data to a NUMA node that does not fall into the cpuset of the allocating process. This could be construed to violate the guarantees of cpusets. However, since this is an opt-in mechanism, the assumption is that anyone enabling it is content to relax the guarantees. Link: https://lkml.kernel.org/r/20210721063926.3024591-9-ying.huang@intel.com Link: https://lkml.kernel.org/r/20210715055145.195411-10-ying.huang@intel.com Signed-off-by: Huang Ying <ying.huang@intel.com> Originally-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Xu <weixugc@google.com> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Zi Yan <ziy@nvidia.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 4 年前 | |
mm, swap: use page-cluster as max window of VMA based swap readahead When the VMA based swap readahead was introduced, a new knob /sys/kernel/mm/swap/vma_ra_max_order was added as the max window of VMA swap readahead. This is to make it possible to use different max window for VMA based readahead and original physical readahead. But Minchan Kim pointed out that this will cause a regression because setting page-cluster sysctl to zero cannot disable swap readahead with the change. To fix the regression, the page-cluster sysctl is used as the max window of both the VMA based swap readahead and original physical swap readahead. If more fine grained control is needed in the future, more knobs can be added as the subordinate knobs of the page-cluster sysctl. The vma_ra_max_order knob is deleted. Because the knob was introduced in v4.14-rc1, and this patch is targeting being merged before v4.14 releasing, there should be no existing users of this newly added ABI. Link: http://lkml.kernel.org/r/20171011070847.16003-1-ying.huang@intel.com Fixes: ec560175c0b6fce ("mm, swap: VMA based swap readahead") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@kernel.org> Cc: Hugh Dickins <hughd@google.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Tim Chen <tim.c.chen@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 8 年前 | |
exit: Expose "oops_count" to sysfs Since Oops count is now tracked and is a fairly interesting signal, add the entry /sys/kernel/oops_count to expose it to userspace. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221117234328.594699-3-keescook@chromium.org | 3 年前 | |
reboot: allow to specify reboot mode via sysfs The kernel cmdline reboot= option offers some sort of control on how the reboot is issued. We don't always know in advance what type of reboot to perform. Sometimes a warm reboot is preferred to persist certain memory regions across the reboot. Others a cold one is needed to apply a future system update that makes a memory memory model change, like changing the base page size or resizing a persistent memory region. Or simply we want to enable reboot_force because we noticed that something bad happened. Add handles in sysfs to allow setting these reboot options, so they can be changed when the system is booted, other than at boot time. The handlers are under <sysfs>/kernel/reboot, can be read to get the current configuration and written to alter it. # cd /sys/kernel/reboot/ # grep . * cpu:0 force:0 mode:cold type:acpi # echo 2 >cpu # echo yes >force # echo soft >mode # echo bios >type # grep . * cpu:2 force:1 mode:soft type:bios Before setting anything, check for CAP_SYS_BOOT capability, so it's possible to allow an unpriviledged process to change these settings simply by relaxing the handles permissions, without opening them to the world. [natechancellor@gmail.com: fix variable assignments in type_store] Link: https://lkml.kernel.org/r/20201112035023.974748-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1197 Link: https://lkml.kernel.org/r/20201110202746.9690-1-mcroce@linux.microsoft.com Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Kees Cook <keescook@chromium.org> Cc: Tyler Hicks <tyhicks@linux.microsoft.com> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 | |
docs: rename Documentation/vm to Documentation/mm so it will be consistent with code mm directory and with Documentation/admin-guide/mm and won't be confused with virtual machines. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Tested-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Wu XiangCheng <bobwxc@email.cn> | 4 年前 | |
ABI: fix some syntax issues at the ABI database On those three files, the ABI representation described at README are violated. - at sysfs-bus-iio-proximity-as3935: a ':' character is missing after "What" - at sysfs-class-devfreq: there's a typo at Description - at sysfs-class-cxl, it is using the ":" character at a file preamble, causing it to be misinterpreted as a tag. - On the other files, instead of "What", they use "Where". Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # cxl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
docs: Fix path paste-o for /sys/kernel/warn_count Running "make htmldocs" shows that "/sys/kernel/oops_count" was duplicated. This should have been "warn_count": Warning: /sys/kernel/oops_count is defined 2 times: ./Documentation/ABI/testing/sysfs-kernel-warn_count:0 ./Documentation/ABI/testing/sysfs-kernel-oops_count:0 Fix the typo. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-doc/202212110529.A3Qav8aR-lkp@intel.com Fixes: 8b05aa263361 ("panic: Expose "warn_count" to sysfs") Cc: linux-hardening@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> | 3 年前 | |
x86/mce: Remove the tolerance level control This is pretty much unused and not really useful. What is more, all relevant MCA hardware has recoverable machine checks support so there's no real need to tweak MCA tolerance levels in order to *maybe* extend machine lifetime. So rip it out. Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/YcDq8PxvKtTENl/e@zn.tnic | 4 年前 | |
HWPOISON: offline support: fix spelling in Documentation/ABI/ Correct spelling problems as identified by codespell. Link: https://lkml.kernel.org/r/20230710052223.18254-1-rdunlap@infradead.org Fixes: facb6011f399 ("HWPOISON: Add soft page offline support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
xen: speed up grant-table reclaim When a grant entry is still in use by the remote domain, Linux must put it on a deferred list. Normally, this list is very short, because the PV network and block protocols expect the backend to unmap the grant first. However, Qubes OS's GUI protocol is subject to the constraints of the X Window System, and as such winds up with the frontend unmapping the window first. As a result, the list can grow very large, resulting in a massive memory leak and eventual VM freeze. To partially solve this problem, make the number of entries that the VM will attempt to free at each iteration tunable. The default is still 10, but it can be overridden via a module parameter. This is Cc: stable because (when combined with appropriate userspace changes) it fixes a severe performance and stability problem for Qubes OS users. Cc: stable@vger.kernel.org Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230726165354.1252-1-demi@invisiblethingslab.com Signed-off-by: Juergen Gross <jgross@suse.com> | 3 年前 | |
docs: update ocfs2-devel mailing list address The ocfs2-devel mailing list has been migrated to the kernel.org infrastructure, update all related documentation pointers to reflect the change. Link: https://lkml.kernel.org/r/20230628013437.47030-3-ailiop@suse.com Signed-off-by: Anthony Iliopoulos <ailiop@suse.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
platform/x86: asus-wmi: expose dGPU and CPU tunables for ROG Expose various CPU and dGPU tunables that are available on many ASUS ROG laptops. The tunables shown in sysfs will vary depending on the CPU and dGPU vendor. All of these variables are write only and there is no easy way to find what the defaults are. In general they seem to default to the max value the vendor sets for the CPU and dGPU package - this is not the same as the min/max writable value. Values written to these variables that are beyond the capabilities of the CPU are ignored by the laptop. Signed-off-by: Luke D. Jones <luke@ljones.dev> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230630053552.976579-9-luke@ljones.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation: sysfs: add Broadcom GISB arbiter sysfs properties This patch documents the sysfs properties exposed by the Broadcom GISB bus arbiter hardware. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 12 年前 | |
Documentation: sysfs: Document Broadcom STB memc sysfs knobs Document the "srpd" and "frequency" sysfs attributes exposed by the brcmstb_memc driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220812222533.2428033-3-f.fainelli@gmail.com | 4 年前 | |
Documentation: ABI: usb: chipidea: Update Li Jun's e-mail The freescale.com e-mail domain is no longer active for quite some time. Switch Li Jun's e-mail address to the NXP domain. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20200529104234.25136-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 6 年前 | |
usb: chipidea: clarify Documentation/ABI text Fix grammar and improve readability of chipidea-usb2 text. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Chen <peter.chen@kernel.org> Cc: linux-usb@vger.kernel.org Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20220827203217.7837-1-rdunlap@infradead.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
ABI: sysfs-platform-dell-privacy-wmi: correct ABI entries As described at Documentation/ABI/README doesn't contain an Attribute: field. The way sysfs ABI is supposed to work is that each different attribute would have a separate file. So, the right way to map this would be like: /sys/.../dell_privacy_supported_type/mic_mute /sys/.../dell_privacy_supported_type/camera_shutter /sys/.../dell_privacy_current_state/mic_mute /sys/.../dell_privacy_current_state/camera_shutter However, it seems to late to fix that, as this was merged already on Kernel 5.13, and a change right now would be a regression. So, instead, let's at least fix the entry to match the expected format. While here, fix the format of the contact, which is not a valid e-mail URL. This should also fix the current warnings produced when building the docs: Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:35: WARNING: Unexpected indentation. Documentation/ABI/testing/sysfs-platform-dell-privacy-wmi:2: WARNING: Unexpected indentation. Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/42846621fdf2bf206feb114d06b14cbc47475fb5.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 4 年前 | |
platform/x86: Update Mario Limonciello's email address in the docs Various pdx86 docs under Documentation/ABI/testing still use Mario's old, now defunct, <mario.limonciello@dell.com> address. Update the docs to point to either the new Dell.Client.Kernel@dell.com email alias for Dell specific drivers, or to Mario's new @outlook.com address for other drivers. Cc: Dell.Client.Kernel@dell.com Cc: Mario Limonciello <mario.limonciello@outlook.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210810160900.106512-1-hdegoede@redhat.com | 4 年前 | |
platform/x86: dell-ddv: Update ABI documentation Synchronize the ABI documentation with the driver documentation and direct users to the latter in case the search for more detailed information. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230508204241.11076-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
fpga: dfl: afu: add error reporting support. Error reporting is one important private feature, it reports error detected on port and accelerated function unit (AFU). It introduces several sysfs interfaces to allow userspace to check and clear errors detected by hardware. Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Moritz Fischer <mdf@kernel.org> | 6 年前 | |
ABI: sysfs-platform-dptf: Add tables markup to a table Solve those warnings: Documentation/ABI/testing/sysfs-platform-dptf:130: WARNING: Unexpected indentation. Documentation/ABI/testing/sysfs-platform-dptf:130: WARNING: Block quote ends without a blank line; unexpected unindent. Documentation/ABI/testing/sysfs-platform-dptf:130: WARNING: Definition list ends without a blank line; unexpected unindent. Fixes: 668ce99e4ed4 ("ACPI: DPTF: Additional sysfs attributes for power participant driver") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/41b5bbac8a67a8c5bc1d3f84de38824e705dea5d.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
dmaengine: qcom_hidma: Update codeaurora email domain The codeaurora.org email domain is defunct and will bounce. Update entries to Sinan's kernel.org address which is the address in MAINTAINERS for this component. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-By: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> | 3 年前 | |
dmaengine: qcom_hidma: Update codeaurora email domain The codeaurora.org email domain is defunct and will bounce. Update entries to Sinan's kernel.org address which is the address in MAINTAINERS for this component. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Acked-By: Sinan Kaya <okaya@kernel.org> Link: https://lore.kernel.org/r/20230707195003.6619-1-quic_jhugo@quicinc.com Signed-off-by: Vinod Koul <vkoul@kernel.org> | 3 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute Document the conservation_mode attributes provided by the ideapad-laptop module. Fixes: ade50296186a ("platform/x86: ideapad-laptop: Expose conservation mode switch") Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Link: https://lore.kernel.org/r/20210203215403.290792-30-pobrn@protonmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 5 年前 | |
Documentation/ABI: Update IFS ABI doc Array BIST test doesn't need an IFS test image to operate unlike the SCAN test. Consequently current_batch and image_version files are not applicable for Array BIST IFS device instance, clarify this in the ABI doc. Also given that multiple tests are supported, take the opportunity to generalize descriptions wherever applicable. Signed-off-by: Jithu Joseph <jithu.joseph@intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20230322003359.213046-10-jithu.joseph@intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
ABI: sysfs-platform-intel-pmc: add blank lines to make it valid for ReST The ReST format requires blank lines before/after identation changes, for it to properly detect lists. Fixes: ee7abc105e2b ("platform/x86: intel_pmc_core: export platform global reset bits via etr3 sysfs file") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/3673e1a255ad4100c933af215b60d68ba126f820.1632740376.git.mchehab+huawei@kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 4 年前 | |
docs: ABI: fix syntax to be parsed using ReST notation There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
platform/x86: Update Mario Limonciello's email address in the docs Various pdx86 docs under Documentation/ABI/testing still use Mario's old, now defunct, <mario.limonciello@dell.com> address. Update the docs to point to either the new Dell.Client.Kernel@dell.com email alias for Dell specific drivers, or to Mario's new @outlook.com address for other drivers. Cc: Dell.Client.Kernel@dell.com Cc: Mario Limonciello <mario.limonciello@outlook.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210810160900.106512-1-hdegoede@redhat.com | 4 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
lg-laptop: Move setting of battery charge limit to common location For now leave also the driver specific location, with deprecated warning in documentation. Signed-off-by: Matan Ziv-Av <matan@svgalib.org> Link: https://lore.kernel.org/r/eca2fa354f60b8a6e5a5c9c8e244fea56616970a.1645278914.git.matan@svgalib.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 4 年前 | |
mlxbf-bootctl: Support sysfs entries for MFG fields This patch extends the mlxbf-bootctl driver's sysfs entries to support read and write access for the manufacturing (MFG) fields in the board-level EEPROM. The MFG fields are set once during the board manufacturing phase, and then the MFG fields are write-protected. Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com> Link: https://lore.kernel.org/r/20230821183939.3229-1-davthompson@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> | 3 年前 | |
msi-laptop: Add missing ABI documentation Add ABI documentation for all sysfs files exposed by msi-laptop driver. Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com> | 13 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
power: reset: at91-reset: add sysfs interface to the power on reason Introduce a list of generic reset sources and use them to export the power on reason through sysfs. Update the ABI documentation to describe this new interface. Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> [Miquel Raynal: Follow-up on Kamel's work, 4 years later] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 3 年前 | |
docs: ABI: Drop trailing whitespace Remove all trailing whitespace from the ABI documentation. Most of it was introduced during recent updates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110144033.3278499-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
Documentation/ABI: Fix typos Fix typos in Documentation/ABI. The changes are in descriptions or comments where they shouldn't affect use of the ABIs. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20230814212822.193684-2-helgaas@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
usb: omap1: Tahvo USB transceiver driver Add Tahvo USB transceiver driver. Based on old code from linux-omap tree. The original driver was written by Juha Yrjölä, Tony Lindgren, and Timo Teräs. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com> | 12 年前 | |
x86/platform/ts5500: Add a 'name' sysfs attribute Add a new "name" attribute to the TS5500 sysfs group, to clarify which supported board model it is. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Savoir-faire Linux Inc. <kernel@savoirfairelinux.com> Link: http://lkml.kernel.org/r/1404860269-11837-3-git-send-email-vivien.didelot@savoirfairelinux.com Signed-off-by: Ingo Molnar <mingo@kernel.org> | 11 年前 | |
phy: twl4030-usb: add ABI documentation This driver device one local attribute: vbus. Describe that in Documentation/ABI/testing/sysfs-platform/twl4030-usb. Signed-off-by: NeilBrown <neil@brown.name> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> | 11 年前 | |
docs: ABI: testing: make the files compatible with ReST output Some files over there won't parse well by Sphinx. Fix them. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO Acked-by: Fabrice Gasnier <fabrice.gasnier@st.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/58cf3c2d611e0197fb215652719ebd82ca2658db.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: fix syntax to be parsed using ReST notation There are a number of new changes at the ABI files that cause them to produce warnings when generating ABI output. Fix them. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ACPI: platform-profile: call sysfs_notify() from platform_profile_store() Drivers like thinkpad_acpi and ideapad_laptop call the platform_profile_notify() helper when the profile is changed by hardware (the embedded-controller/EC) in response to an EC handled hotkey. This allows userspace to monitor for such changes by polling for POLLPRI on the platform_profile sysfs file. But the profile can also be changed underneath a userspace program monitoring it by anonther userspace program storing a new value. Add a sysfs_notify() call to platform_profile_store(), so that userspace programs monitoring for changes also get notified in this case. Also update the documentation to document that POLLPRI polling can be used to watch for changes. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 4 年前 | |
PM: Add sysfs files to represent time spent in hardware sleep state Userspace can't easily discover how much of a sleep cycle was spent in a hardware sleep state without using kernel tracing and vendor specific sysfs or debugfs files. To make this information more discoverable, introduce 3 new sysfs files: 1) The time spent in a hw sleep state for last cycle. 2) The time spent in a hw sleep state since the kernel booted 3) The maximum time that the hardware can report for a sleep cycle. All of these files will be present only if the system supports s2idle. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 3 年前 | |
LinuxPPS: core support This patch adds the kernel side of the PPS support currently named "LinuxPPS". PPS means "pulse per second" and a PPS source is just a device which provides a high precision signal each second so that an application can use it to adjust system clock time. Common use is the combination of the NTPD as userland program with a GPS receiver as PPS source to obtain a wallclock-time with sub-millisecond synchronisation to UTC. To obtain this goal the userland programs shoud use the PPS API specification (RFC 2783 - Pulse-Per-Second API for UNIX-like Operating Systems, Version 1.0) which in part is implemented by this patch. It provides a set of chars devices, one per PPS source, which can be used to get the time signal. The RFC's functions can be implemented by accessing to these char devices. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg KH <greg@kroah.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 16 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
ABI: sysfs-ptp: use wildcards on What definitions An "N" upper letter is not a wildcard, nor can easily be identified by script, specially since the USB sysfs define things like. bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl to convert it into a Regex. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/03dcf9985244f8f9d8202af1ba203abb1f405e7d.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
powerpc/pseries: Implement secvars for dynamic secure boot The pseries platform can support dynamic secure boot (i.e. secure boot using user-defined keys) using variables contained with the PowerVM LPAR Platform KeyStore (PLPKS). Using the powerpc secvar API, expose the relevant variables for pseries dynamic secure boot through the existing secvar filesystem layout. The relevant variables for dynamic secure boot are signed in the keystore, and can only be modified using the H_PKS_SIGNED_UPDATE hcall. Object labels in the keystore are encoded using ucs2 format. With our fixed variable names we don't have to care about encoding outside of the necessary byte padding. When a user writes to a variable, the first 8 bytes of data must contain the signed update flags as defined by the hypervisor. When a user reads a variable, the first 4 bytes of data contain the policies defined for the object. Limitations exist due to the underlying implementation of sysfs binary attributes, as is the case for the OPAL secvar implementation - partial writes are unsupported and writes cannot be larger than PAGE_SIZE. (Even when using bin_attributes, which can be larger than a single page, sysfs only gives us one page's worth of write buffer at a time, and the hypervisor does not expose an interface for partial writes.) Co-developed-by: Nayna Jain <nayna@linux.ibm.com> Signed-off-by: Nayna Jain <nayna@linux.ibm.com> Co-developed-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Russell Currey <ruscur@russell.cc> [mpe: Add NLS dependency to fix build errors, squash fix from ajd] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230210080401.345462-25-ajd@linux.ibm.com | 3 年前 | |
docs: ABI: Document new timecard sysfs nodes. Add sysfs nodes for the frequency generator and signal counters. Update SMA selector lists for these, and also add the new 'None', 'VCC' 'GND' selectors. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 4 年前 | |
ABI: sysfs-tty: better document module name parameter On almost all ABI documents, variable arguments are declared as <foo_bar>. Change it here too, in order to allow replacing such wildcards by regexes on a scriptable way. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6280edfacdbcbf8db1aeb7bf11e899187c11ac4c.1631782432.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
docs: ABI: sysfs-uevent: make it compatible with ReST output - Replace " by ``, in order to use monospaced fonts; - mark literal blocks as such. Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/63904cc9b6a8581c5fc2ea1dca5d925874c67372.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 | |
docs: ABI: cleanup several ABI documents There are some ABI documents that, while they don't generate any warnings, they have issues when parsed by get_abi.pl script on its output result. Address them, in order to provide a clean output. Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7 Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd Acked-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 5 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 9 年前 | ||
| 5 年前 | ||
| 10 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 12 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 12 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 12 年前 | ||
| 12 年前 | ||
| 12 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 12 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 10 年前 | ||
| 4 年前 | ||
| 9 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 14 年前 | ||
| 5 年前 | ||
| 14 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 8 年前 | ||
| 13 年前 | ||
| 3 年前 | ||
| 11 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 14 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 11 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 个月前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 14 年前 | ||
| 9 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 14 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 9 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 9 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 6 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 12 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 11 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 10 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 9 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 9 年前 | ||
| 13 年前 | ||
| 9 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 10 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 10 年前 | ||
| 7 年前 | ||
| 10 年前 | ||
| 4 年前 | ||
| 15 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 9 个月前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 5 年前 | ||
| 14 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 9 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 11 年前 | ||
| 11 年前 | ||
| 16 年前 | ||
| 7 个月前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 7 个月前 | ||
| 9 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 13 年前 | ||
| 11 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 5 年前 | ||
| 10 年前 | ||
| 10 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 11 年前 | ||
| 5 年前 | ||
| 14 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 8 年前 | ||
| 13 年前 | ||
| 3 年前 | ||
| 13 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 15 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 13 年前 | ||
| 13 年前 | ||
| 13 年前 | ||
| 13 年前 | ||
| 13 年前 | ||
| 13 年前 | ||
| 13 年前 | ||
| 4 年前 | ||
| 13 年前 | ||
| 4 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 12 年前 | ||
| 5 年前 | ||
| 7 个月前 | ||
| 5 年前 | ||
| 13 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 10 年前 | ||
| 5 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 14 年前 | ||
| 5 年前 | ||
| 10 年前 | ||
| 16 年前 | ||
| 5 年前 | ||
| 13 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 12 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 13 天前 | ||
| 1 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 11 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 15 年前 | ||
| 5 年前 | ||
| 9 年前 | ||
| 8 年前 | ||
| 8 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 1 年前 | ||
| 11 年前 | ||
| 4 年前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 10 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 6 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 17 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 12 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 13 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 12 年前 | ||
| 11 年前 | ||
| 11 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 16 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 |