| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
kunit: Add documentation of KUnit test attributes Add documentation on the use of test attributes under the section "Tips for Running KUnit Tests" in the KUnit docs. Documentation includes three sections on how to mark tests with attributes, how attributes are reported, and how the user can filter tests using test attributes. Add descriptions of new flags to list of command-line arguments. Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Rae Moar <rmoar@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> | 2 年前 | |
kbuild: Add AutoFDO support for Clang build [ Upstream commit 315ad8780a129e82e2c5c65ee6e970d91a577acb ] Add the build support for using Clang's AutoFDO. Building the kernel with AutoFDO does not reduce the optimization level from the compiler. AutoFDO uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. Experiments showed that the kernel can improve up to 10% in latency. The support requires a Clang compiler after LLVM 17. This submission is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Support for SPE on ARM 1, and BRBE on ARM 1 is part of planned future work. Here is an example workflow for AutoFDO kernel: 1) Build the kernel on the host machine with LLVM enabled, for example, $ make menuconfig LLVM=1 Turn on AutoFDO build config: CONFIG_AUTOFDO_CLANG=y With a configuration that has LLVM enabled, use the following command: scripts/config -e AUTOFDO_CLANG After getting the config, build with $ make LLVM=1 2) Install the kernel on the test machine. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 For Zen3: $ cat proc/cpuinfo | grep " brs" For Zen4: $ cat proc/cpuinfo | grep amd_lbr_v2 $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) To generate an AutoFDO profile, two offline tools are available: create_llvm_prof and llvm_profgen. The create_llvm_prof tool is part of the AutoFDO project and can be found on GitHub (https://github.com/google/autofdo), version v0.30.1 or later. The llvm_profgen tool is included in the LLVM compiler itself. It's important to note that the version of llvm_profgen doesn't need to match the version of Clang. It needs to be the LLVM 19 release or later, or from the LLVM trunk. $ llvm-profgen --kernel --binary=<vmlinux> --perfdata=<perf_file> \ -o <profile_file> or $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=extbinary --out=<profile_file> Note that multiple AutoFDO profile files can be merged into one via: $ llvm-profdata merge -o <profile_file> <profile_1> ... <profile_n> 6) Rebuild the kernel using the AutoFDO profile file with the same config as step 1, (Note CONFIG_AUTOFDO_CLANG needs to be enabled): $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<profile_file> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Yabin Cui <yabinc@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Tested-by: Peter Jung <ptr1337@cachyos.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [ Backport from v6.13 ] Signed-off-by: WangYuli <wangyuli@uniontech.com> | 1 年前 | |
checkpatch: add an invalid patch separator test [Upstream commit 931d5c36c7369b65adb9e3d197a8d3a8a913db8c] Some versions of tools that apply patches incorrectly allow lines that start with 3 dashes and have additional content on the same line. Checkpatch will now emit an ERROR on these lines and optionally convert those lines from dashes to equals with --fix. Link: https://lkml.kernel.org/r/6ec1ed08328340db42655287afd5fa4067316b11.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Ian Rogers <irogers@google.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: Dwaipayan Ray <dwaipayanray1@gmail.com> Cc: Kuan-Wei Chiu <visitorckw@gmail.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Namhyung kim <namhyung@kernel.org> Cc: Stehen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn> | 2 个月前 | |
Documentation: coccinelle: Escape --options to fix Sphinx output Without such escaping, -- is rendered as – (en dash). Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Acked-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/20230129151408.1525324-1-j.neuschaefer@gmx.net Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs/gcov: Convert two tags to ref in dev-tools/gov.rst Htmldocs does not display the chapter number, convert the two manual chapter number tags to ref tags. Signed-off-by: Wu XiangCheng <bobwxc@email.cn> Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com> Link: https://lore.kernel.org/r/20210403113752.GA32236@mipc Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 5 年前 | |
docs/scripts/gdb: add necessary make scripts_gdb step In order to debug the kernel successfully with gdb you need to run 'make scripts_gdb' nowadays. This was changed with the following commit: Commit 67274c083438340ad16c ("scripts/gdb: delay generation of gdb constants.py") In order to have a complete guide for beginners this remark should be added to the offial documentation. Signed-off-by: Jakob Koschel <jkl820.git@gmail.com> Link: https://lore.kernel.org/r/20230112-documentation-gdb-v2-1-292785c43dc9@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
kbuild: Add Propeller configuration for kernel build [ Upstream commit d5dc95836147f2e25b134c0ca3a0bc1a5867ea29 ] Add the build support for using Clang's Propeller optimizer. Like AutoFDO, Propeller uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. The support requires a Clang compiler LLVM 19 or later, and the create_llvm_prof tool (https://github.com/google/autofdo/releases/tag/v0.30.1). This commit is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Here is an example workflow for building an AutoFDO+Propeller optimized kernel: 1) Build the kernel on the host machine, with AutoFDO and Propeller build config CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y then $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> “<autofdo_profile>” is the profile collected when doing a non-Propeller AutoFDO build. This step builds a kernel that has the same optimization level as AutoFDO, plus a metadata section that records basic block information. This kernel image runs as fast as an AutoFDO optimized kernel. 2) Install the kernel on test/production machines. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 # To see if Zen3 support LBR: $ cat proc/cpuinfo | grep " brs" # To see if Zen4 support LBR: $ cat proc/cpuinfo | grep amd_lbr_v2 # If the result is yes, then collect the profile using: $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) Generate Propeller profile: $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=propeller --propeller_output_module_name \ --out=<propeller_profile_prefix>_cc_profile.txt \ --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt “create_llvm_prof” is the profile conversion tool, and a prebuilt binary for linux can be found on https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build from source). "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string". This command generates a pair of Propeller profiles: "<propeller_profile_prefix>_cc_profile.txt" and "<propeller_profile_prefix>_ld_profile.txt". 6) Rebuild the kernel using the AutoFDO and Propeller profile files. CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y and $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \ CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [ Backport from v6.13 ] Signed-off-by: WangYuli <wangyuli@uniontech.com> | 1 年前 | |
LoongArch: Add KASAN (Kernel Address Sanitizer) support 1/8 of kernel addresses reserved for shadow memory. But for LoongArch, There are a lot of holes between different segments and valid address space (256T available) is insufficient to map all these segments to kasan shadow memory with the common formula provided by kasan core, saying (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET So LoongArch has a arch-specific mapping formula, different segments are mapped individually, and only limited space lengths of these specific segments are mapped to shadow. At early boot stage the whole shadow region populated with just one physical page (kasan_early_shadow_page). Later, this page is reused as readonly zero shadow for some memory that kasan currently don't track. After mapping the physical memory, pages for shadow memory are allocated and mapped. Functions like memset()/memcpy()/memmove() do a lot of memory accesses. If bad pointer passed to one of these function it is important to be caught. Compiler's instrumentation cannot do this since these functions are written in assembly. KASan replaces memory functions with manually instrumented variants. Original functions declared as weak symbols so strong definitions in mm/kasan/kasan.c could replace them. Original functions have aliases with '__' prefix in names, so we could call non-instrumented variant if needed. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> | 2 年前 | |
kcov: improve documentation Improve KCOV documentation: - Use KCOV instead of kcov, as the former is more widely-used. - Mention Clang in compiler requirements. - Use annotations for inline code. - Rework remote coverage collection documentation for better clarity. - Various smaller changes. [andreyknvl@google.com: v2] Link: https://lkml.kernel.org/r/583f41c49eef15210fa813e8229730d11427efa7.1677614637.git.andreyknvl@google.com [andreyknvl@google.com: fix annotation for KCOV_REMOTE_ENABLE] Link: https://lkml.kernel.org/r/72be5c215c275f35891229b90622ed859f196a46.1677684837.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/0b5efd70e31bba7912cf9a6c951f0e76a8df27df.1677517724.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
kcsan: Document modeling of weak memory Document how KCSAN models a subset of weak memory and the subset of missing memory barriers it can detect as a result. Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> | 4 年前 | |
kfence: allow use of a deferrable timer Allow the use of a deferrable timer, which does not force CPU wake-ups when the system is idle. A consequence is that the sample interval becomes very unpredictable, to the point that it is not guaranteed that the KFENCE KUnit test still passes. Nevertheless, on power-constrained systems this may be preferable, so let's give the user the option should they accept the above trade-off. Link: https://lkml.kernel.org/r/20220308141415.3168078-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 4 年前 | |
Documentation: kgdb: Replace deprecated remotebaud Using set remotebaud to set the baud rate was deprecated in gdb-7.7 and completely removed from the command parser in gdb-7.8 (released in 2014). Adopt set serial baud instead. Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/4050689967ed46baaa3bfadda53a0e73@hyperstone.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 4 年前 | |
docs: kmemleak: adjust to config renaming Commit c87db8ca0902 ("kmemleak-test: fix kmemleak_test.c build logic") essentially renames the config DEBUG_KMEMLEAK_TEST to SAMPLE_KMEMLEAK, but misses to adjust the documentation. Adjust kmemleak documentation to this config renaming. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20230414061241.12754-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 3 年前 | |
docs: kmsan: fix formatting of "Example report" Add a blank line to make the sentence before the list render as a separate paragraph, not a definition. Link: https://lkml.kernel.org/r/20221107142255.4038811-1-glider@google.com Fixes: 93858ae70cf4 ("kmsan: add ReST documentation") Signed-off-by: Alexander Potapenko <glider@google.com> Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> | 3 年前 | |
selftests: Introduce Makefile variable to list shared bash scripts [ Upstream commit 2a0683be5b4c9829e8335e494a21d1148e832822 ] Some tests written in bash source other files in a parent directory. For example, drivers/net/bonding/dev_addr_lists.sh sources net/forwarding/lib.sh. If a subset of tests is exported and run outside the source tree (for example by using make -C tools/testing/selftests gen_tar TARGETS="drivers/net/bonding"), these other files must be made available as well. Commit ae108c48b5d2 ("selftests: net: Fix cross-tree inclusion of scripts") addressed this problem by symlinking and copying the sourced files but this only works for direct dependencies. Commit 25ae948b4478 ("selftests/net: add lib.sh") changed net/forwarding/lib.sh to source net/lib.sh. As a result, that latter file must be included as well when the former is exported. This was not handled and was reverted in commit 2114e83381d3 ("selftests: forwarding: Avoid failures to source net/lib.sh"). In order to allow reinstating the inclusion of net/lib.sh from net/forwarding/lib.sh, add a mechanism to list dependent files in a new Makefile variable and export them. This allows sourcing those files using the same expression whether tests are run in-tree or exported. Dependencies are not resolved recursively so transitive dependencies must be listed in TEST_INCLUDES. For example, if net/forwarding/lib.sh sources net/lib.sh; the Makefile related to a test that sources net/forwarding/lib.sh from a parent directory must list: TEST_INCLUDES := \ ../../../net/forwarding/lib.sh \ ../../../net/lib.sh v2: Fix rst syntax in Documentation/dev-tools/kselftest.rst (Jakub Kicinski) v1 (from RFC): * changed TEST_INCLUDES to take relative paths, like other TEST_* variables (Vladimir Oltean) * preserved common "$(MAKE) OUTPUT=... -C ... target" ordering in Makefile (Petr Machata) Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 66c43605be895a022386cb52322ac7f9ef1aafca) | 1 年前 | |
Documentation: dev-tools: Clarify requirements for result description Currently the KTAP specification says that a test result line is <result> <number> [<description>][ # [<directive>] [<diagnostic data>]] and the description of a test can be "any sequence of words (can't include #)" which specifies that there may be more than one word but does not specify anything other than those words which might be used to separate the words which probably isn't what we want. Given that practically we have tests using a range of separators for words including combinations of spaces and combinations of other symbols like underscores or punctuation let's just clarify that the description can contain any character other than # (marking the start of the directive/diagnostic) or newline (marking the end of this test result). Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> | 3 年前 | |
kbuild: Add Propeller configuration for kernel build [ Upstream commit d5dc95836147f2e25b134c0ca3a0bc1a5867ea29 ] Add the build support for using Clang's Propeller optimizer. Like AutoFDO, Propeller uses hardware sampling to gather information about the frequency of execution of different code paths within a binary. This information is then used to guide the compiler's optimization decisions, resulting in a more efficient binary. The support requires a Clang compiler LLVM 19 or later, and the create_llvm_prof tool (https://github.com/google/autofdo/releases/tag/v0.30.1). This commit is limited to x86 platforms that support PMU features like LBR on Intel machines and AMD Zen3 BRS. Here is an example workflow for building an AutoFDO+Propeller optimized kernel: 1) Build the kernel on the host machine, with AutoFDO and Propeller build config CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y then $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> “<autofdo_profile>” is the profile collected when doing a non-Propeller AutoFDO build. This step builds a kernel that has the same optimization level as AutoFDO, plus a metadata section that records basic block information. This kernel image runs as fast as an AutoFDO optimized kernel. 2) Install the kernel on test/production machines. 3) Run the load tests. The '-c' option in perf specifies the sample event period. We suggest using a suitable prime number, like 500009, for this purpose. For Intel platforms: $ perf record -e BR_INST_RETIRED.NEAR_TAKEN:k -a -N -b -c <count> \ -o <perf_file> -- <loadtest> For AMD platforms: The supported system are: Zen3 with BRS, or Zen4 with amd_lbr_v2 # To see if Zen3 support LBR: $ cat proc/cpuinfo | grep " brs" # To see if Zen4 support LBR: $ cat proc/cpuinfo | grep amd_lbr_v2 # If the result is yes, then collect the profile using: $ perf record --pfm-events RETIRED_TAKEN_BRANCH_INSTRUCTIONS:k -a \ -N -b -c <count> -o <perf_file> -- <loadtest> 4) (Optional) Download the raw perf file to the host machine. 5) Generate Propeller profile: $ create_llvm_prof --binary=<vmlinux> --profile=<perf_file> \ --format=propeller --propeller_output_module_name \ --out=<propeller_profile_prefix>_cc_profile.txt \ --propeller_symorder=<propeller_profile_prefix>_ld_profile.txt “create_llvm_prof” is the profile conversion tool, and a prebuilt binary for linux can be found on https://github.com/google/autofdo/releases/tag/v0.30.1 (can also build from source). "<propeller_profile_prefix>" can be something like "/home/user/dir/any_string". This command generates a pair of Propeller profiles: "<propeller_profile_prefix>_cc_profile.txt" and "<propeller_profile_prefix>_ld_profile.txt". 6) Rebuild the kernel using the AutoFDO and Propeller profile files. CONFIG_AUTOFDO_CLANG=y CONFIG_PROPELLER_CLANG=y and $ make LLVM=1 CLANG_AUTOFDO_PROFILE=<autofdo_profile> \ CLANG_PROPELLER_PROFILE_PREFIX=<propeller_profile_prefix> Co-developed-by: Han Shen <shenhan@google.com> Signed-off-by: Han Shen <shenhan@google.com> Signed-off-by: Rong Xu <xur@google.com> Suggested-by: Sriraman Tallam <tmsriram@google.com> Suggested-by: Krzysztof Pszeniczny <kpszeniczny@google.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Stephane Eranian <eranian@google.com> Tested-by: Yonghong Song <yonghong.song@linux.dev> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [ Backport from v6.13 ] Signed-off-by: WangYuli <wangyuli@uniontech.com> | 1 年前 | |
Documentation/sparse: add hints about __CHECKER__ Several attributes depend on __CHECKER__, but previously there was no clue in the tree about when __CHECKER__ might be defined. Add hints at the most common places (__kernel, __user, __iomem, __bitwise) and in the sparse documentation. Link: https://lkml.kernel.org/r/20220310220927.245704-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 4 年前 | |
Documentation: dev-tools: Enhance static analysis section with discussion Enhance the static analysis tools section with a discussion on when to use each of them. This was mainly taken from Dan Carpenter and Julia Lawall's comments on a previous documentation patch for static analysis tools. Lore: https://lore.kernel.org/linux-doc/20220329090911.GX3293@kadam/T/#mb97770c8e938095aadc3ee08f4ac7fe32ae386e6 Signed-off-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com> Acked-by: David Gow <davidgow@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: Jonathan Corbet <corbet@lwn.net> | 4 年前 | |
ubsan: remove UBSAN_MISC in favor of individual options Make each UBSAN option individually selectable and remove UBSAN_MISC which no longer has any purpose. Add help text for each Kconfig, and include a reference to the Clang sanitizer documentation. Disable unsigned overflow by default (not available with GCC and makes x86 unbootable with Clang). Disable unreachable when objtool is in use (redundant and confuses things: instrumentation appears at unreachable locations). Link: https://lkml.kernel.org/r/20201203004437.389959-7-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: George Popescu <georgepope@android.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marco Elver <elver@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 5 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 2 年前 | ||
| 1 年前 | ||
| 2 个月前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 1 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 5 年前 |