| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
netfilter: nf_tables: remove register tracking infrastructure [ Upstream commit 6b94d081f81dd524626f7aab2b98a9de335edb72 ] This facility was disabled in commit 9e539c5b6d9c ("netfilter: nf_tables: disable expression reduction infra"), because not all nft_exprs guarantee they will update the destination register: some may set NFT_BREAK instead to cancel evaluation of the rule. This has been dead code ever since. There are no plans to salvage this at this time, so remove this. Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://patch.msgid.link/20260224205048.4718-10-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: d07955dd34ec ("netfilter: nft_fib: reject fib expression on the netdev egress hook") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 7cd3fee7b361eeca5ef01d707d38c42066ec19f5) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 9 天前 | |
bridge: cfm: Add BRIDGE_CFM to Kconfig. This makes it possible to include or exclude the CFM protocol according to 802.1Q section 12.14. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 5 年前 | |
net: bridge: mst: Multiple Spanning Tree (MST) mode Allow the user to switch from the current per-VLAN STP mode to an MST mode. Up to this point, per-VLAN STP states where always isolated from each other. This is in contrast to the MSTP standard (802.1Q-2018, Clause 13.5), where VLANs are grouped into MST instances (MSTIs), and the state is managed on a per-MSTI level, rather that at the per-VLAN level. Perhaps due to the prevalence of the standard, many switching ASICs are built after the same model. Therefore, add a corresponding MST mode to the bridge, which we can later add offloading support for in a straight-forward way. For now, all VLANs are fixed to MSTI 0, also called the Common Spanning Tree (CST). That is, all VLANs will follow the port-global state. Upcoming changes will make this actually useful by allowing VLANs to be mapped to arbitrary MSTIs and allow individual MSTI states to be changed. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 4 年前 | |
net: bridge: Install FDB for bridge MAC on VLAN 0 [ Upstream commit cd9a9562b2559973aa1b68c3af63021a2c5fd022 ] Currently, after the bridge is created, the FDB does not hold an FDB entry for the bridge MAC on VLAN 0: # ip link add name br up type bridge # ip -br link show dev br br UNKNOWN 92:19:8c:4e:01:ed <BROADCAST,MULTICAST,UP,LOWER_UP> # bridge fdb show | grep 92:19:8c:4e:01:ed 92:19:8c:4e:01:ed dev br vlan 1 master br permanent Later when the bridge MAC is changed, or in fact when the address is given during netdevice creation, the entry appears: # ip link add name br up address 00:11:22:33:44:55 type bridge # bridge fdb show | grep 00:11:22:33:44:55 00:11:22:33:44:55 dev br vlan 1 master br permanent 00:11:22:33:44:55 dev br master br permanent However when the bridge address is set by the user to the current bridge address before the first port is enslaved, none of the address handlers gets invoked, because the address is not actually changed. The address is however marked as NET_ADDR_SET. Then when a port is enslaved, the address is not changed, because it is NET_ADDR_SET. Thus the VLAN 0 entry is not added, and it has not been added previously either: # ip link add name br up type bridge # ip -br link show dev br br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP> # ip link set dev br addr 7e:f0:a8:1a:be:c2 # ip link add name v up type veth # ip link set dev v master br # ip -br link show dev br br UNKNOWN 7e:f0:a8:1a:be:c2 <BROADCAST,MULTICAST,UP,LOWER_UP> # bridge fdb | grep 7e:f0:a8:1a:be:c2 7e:f0:a8:1a:be:c2 dev br vlan 1 master br permanent Then when the bridge MAC is used as DMAC, and br_handle_frame_finish() looks up an FDB entry with VLAN=0, it doesn't find any, and floods the traffic instead of passing it up. Fix this by simply adding the VLAN 0 FDB entry for the bridge itself always on netdevice creation. This also makes the behavior consistent with how ports are treated: ports always have an FDB entry for each member VLAN as well as VLAN 0. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/415202b2d1b9b0899479a502bbe2ba188678f192.1758550408.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 31116de5ee1141813323f9a39df7521fca919286) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 8 个月前 | |
net: bridge: use a stable FDB dst snapshot in RCU readers [ Upstream commit df4601653201de21b487c3e7fffd464790cab808 ] Local FDB entries can be rewritten in place by fdb_delete_local(), which updates f->dst to another port or to NULL while keeping the entry alive. Several bridge RCU readers inspect f->dst, including br_fdb_fillbuf() through the brforward_read() sysfs path. These readers currently load f->dst multiple times and can therefore observe inconsistent values across the check and later dereference. In br_fdb_fillbuf(), this means a concurrent local-FDB update can change f->dst after the NULL check and before the port_no dereference, leading to a NULL-ptr-deref. Fix this by taking a single READ_ONCE() snapshot of f->dst in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place f->dst updates in fdb_delete_local() with WRITE_ONCE() so the readers and writer use matching access patterns. Fixes: 960b589f86c7 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ kept *idx < cb->args[2] instead of *idx < ctx->fdb_idx ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 0b9e4bbfb7c949151e3acd44ed4aa33614d2e110) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 2 个月前 | |
bridge: cfm: reject invalid CCM interval at configuration time [ Upstream commit f3e02edd8322b31b8e6517faa6ba053bf29d1e26 ] ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc). Fixes: 2be665c3940d ("bridge: cfm: Netlink SET configuration Interface.") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260609065116.2818837-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 53788b134519e995699ea3721969c96a08d64575) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 16 天前 | |
bridge: cfm: reject invalid CCM interval at configuration time [ Upstream commit f3e02edd8322b31b8e6517faa6ba053bf29d1e26 ] ccm_tx_work_expired() re-arms itself via queue_delayed_work() using the configured exp_interval converted by interval_to_us(). When exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range, interval_to_us() returns 0, causing the worker to fire immediately in a tight loop that allocates skbs until OOM. Fix this by validating exp_interval at configuration time: - Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range [BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the netlink policy so userspace cannot set an invalid value. - Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has not yet been configured (defaults to 0 from kzalloc). Fixes: 2be665c3940d ("bridge: cfm: Netlink SET configuration Interface.") Reported-by: Weiming Shi <bestswngs@gmail.com> Signed-off-by: Xiang Mei <xmei5@asu.edu> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260609065116.2818837-1-xmei5@asu.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 53788b134519e995699ea3721969c96a08d64575) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 16 天前 | |
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled [ Upstream commit e5e890630533bdc15b26a34bb8e7ef539bdf1322 ] When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: <IRQ> ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled. Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Reported-by: Guruprasad C P <gurucp2005@gmail.com> Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/ Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit a12cdaa3375f0bd3c8f4e564be7c143529abfe5b) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 4 个月前 | |
net: bridge: use a stable FDB dst snapshot in RCU readers [ Upstream commit df4601653201de21b487c3e7fffd464790cab808 ] Local FDB entries can be rewritten in place by fdb_delete_local(), which updates f->dst to another port or to NULL while keeping the entry alive. Several bridge RCU readers inspect f->dst, including br_fdb_fillbuf() through the brforward_read() sysfs path. These readers currently load f->dst multiple times and can therefore observe inconsistent values across the check and later dereference. In br_fdb_fillbuf(), this means a concurrent local-FDB update can change f->dst after the NULL check and before the port_no dereference, leading to a NULL-ptr-deref. Fix this by taking a single READ_ONCE() snapshot of f->dst in each affected RCU reader and using that snapshot for the rest of the access sequence. Also publish the in-place f->dst updates in fdb_delete_local() with WRITE_ONCE() so the readers and writer use matching access patterns. Fixes: 960b589f86c7 ("bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/6570fabb85ecadb8baaf019efe856f407711c7b9.1776043229.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> [ kept *idx < cb->args[2] instead of *idx < ctx->fdb_idx ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 0b9e4bbfb7c949151e3acd44ed4aa33614d2e110) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 2 个月前 | |
net: bridge: fix use-after-free due to MST port state bypass [ Upstream commit 8dca36978aa80bab9d4da130c211db75c9e00048 ] syzbot reported[1] a use-after-free when deleting an expired fdb. It is due to a race condition between learning still happening and a port being deleted, after all its fdbs have been flushed. The port's state has been toggled to disabled so no learning should happen at that time, but if we have MST enabled, it will bypass the port's state, that together with VLAN filtering disabled can lead to fdb learning at a time when it shouldn't happen while the port is being deleted. VLAN filtering must be disabled because we flush the port VLANs when it's being deleted which will stop learning. This fix adds a check for the port's vlan group which is initialized to NULL when the port is getting deleted, that avoids the port state bypass. When MST is enabled there would be a minimal new overhead in the fast-path because the port's vlan group pointer is cache-hot. [1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode") Reported-by: syzbot+dd280197f0f7ab3917be@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/69088ffa.050a0220.29fc44.003d.GAE@google.com/ Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20251105111919.1499702-2-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 3b60ce334c1ce8b3fad7e02dcd5ed9f6646477c8) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 8 个月前 | |
bridge: stp: Fix a potential use-after-free when deleting a bridge [ Upstream commit 2a00517db8de4be7df3d483b215c5544fb30a191 ] The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Reported-by: Neil Young <contact@ssd-disclosure.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260629072117.497959-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 4c40eec06eeac37c58e47a6058eb32901218d5d4) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 16 天前 | |
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled [ Upstream commit e5e890630533bdc15b26a34bb8e7ef539bdf1322 ] When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. Then, if neigh_suppress is enabled and an ICMPv6 Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will dereference ipv6_stub->nd_tbl which is NULL, passing it to neigh_lookup(). This causes a kernel NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000268 Oops: 0000 [#1] PREEMPT SMP NOPTI [...] RIP: 0010:neigh_lookup+0x16/0xe0 [...] Call Trace: <IRQ> ? neigh_lookup+0x16/0xe0 br_do_suppress_nd+0x160/0x290 [bridge] br_handle_frame_finish+0x500/0x620 [bridge] br_handle_frame+0x353/0x440 [bridge] __netif_receive_skb_core.constprop.0+0x298/0x1110 __netif_receive_skb_one_core+0x3d/0xa0 process_backlog+0xa0/0x140 __napi_poll+0x2c/0x170 net_rx_action+0x2c4/0x3a0 handle_softirqs+0xd0/0x270 do_softirq+0x3f/0x60 Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in the callers. This is in essence disabling NS/NA suppression when IPv6 is disabled. Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports") Reported-by: Guruprasad C P <gurucp2005@gmail.com> Closes: https://lore.kernel.org/netdev/CAHXs0ORzd62QOG-Fttqa2Cx_A_VFp=utE2H2VTX5nqfgs7LDxQ@mail.gmail.com/ Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20260304120357.9778-1-fmancera@suse.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit a12cdaa3375f0bd3c8f4e564be7c143529abfe5b) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 4 个月前 | |
net: Remove RTNL dance for SIOCBRADDIF and SIOCBRDELIF. commit ed3ba9b6e280e14cc3148c1b226ba453f02fa76c upstream. SIOCBRDELIF is passed to dev_ioctl() first and later forwarded to br_ioctl_call(), which causes unnecessary RTNL dance and the splat below [0] under RTNL pressure. Let's say Thread A is trying to detach a device from a bridge and Thread B is trying to remove the bridge. In dev_ioctl(), Thread A bumps the bridge device's refcnt by netdev_hold() and releases RTNL because the following br_ioctl_call() also re-acquires RTNL. In the race window, Thread B could acquire RTNL and try to remove the bridge device. Then, rtnl_unlock() by Thread B will release RTNL and wait for netdev_put() by Thread A. Thread A, however, must hold RTNL after the unlock in dev_ifsioc(), which may take long under RTNL pressure, resulting in the splat by Thread B. Thread A (SIOCBRDELIF) Thread B (SIOCBRDELBR) ---------------------- ---------------------- sock_ioctl sock_ioctl - sock_do_ioctl - br_ioctl_call - dev_ioctl - br_ioctl_stub |- rtnl_lock | |- dev_ifsioc ' ' |- dev = __dev_get_by_name(...) |- netdev_hold(dev, ...) . / |- rtnl_unlock ------. | | |- br_ioctl_call ---> |- rtnl_lock Race | | - br_ioctl_stub |- br_del_bridge Window | | | |- dev = __dev_get_by_name(...) | | | May take long | - br_dev_delete(dev, ...) | | | under RTNL pressure | - unregister_netdevice_queue(dev, ...) | | | | - rtnl_unlock \ | |- rtnl_lock <-' - netdev_run_todo | |- ... - netdev_run_todo | - rtnl_unlock |- __rtnl_unlock | |- netdev_wait_allrefs_any |- netdev_put(dev, ...) <----------------' Wait refcnt decrement and log splat below To avoid blocking SIOCBRDELBR unnecessarily, let's not call dev_ioctl() for SIOCBRADDIF and SIOCBRDELIF. In the dev_ioctl() path, we do the following: 1. Copy struct ifreq by get_user_ifreq in sock_do_ioctl() 2. Check CAP_NET_ADMIN in dev_ioctl() 3. Call dev_load() in dev_ioctl() 4. Fetch the master dev from ifr.ifr_name in dev_ifsioc() 3. can be done by request_module() in br_ioctl_call(), so we move 1., 2., and 4. to br_ioctl_stub(). Note that 2. is also checked later in add_del_if(), but it's better performed before RTNL. SIOCBRADDIF and SIOCBRDELIF have been processed in dev_ioctl() since the pre-git era, and there seems to be no specific reason to process them there. [0]: unregister_netdevice: waiting for wpan3 to become free. Usage count = 2 ref_tracker: wpan3@ffff8880662d8608 has 1/1 users at __netdev_tracker_alloc include/linux/netdevice.h:4282 [inline] netdev_hold include/linux/netdevice.h:4311 [inline] dev_ifsioc+0xc6a/0x1160 net/core/dev_ioctl.c:624 dev_ioctl+0x255/0x10c0 net/core/dev_ioctl.c:826 sock_do_ioctl+0x1ca/0x260 net/socket.c:1213 sock_ioctl+0x23a/0x6c0 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x1a4/0x210 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 893b19587534 ("net: bridge: fix ioctl locking") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: yan kang <kangyan91@outlook.com> Reported-by: yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/netdev/SY8P300MB0421225D54EB92762AE8F0F2A1D32@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250316192851.19781-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> [cascardo: fixed conflict at dev_ifsioc] Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit d767ce15045df510f55cdd2af5df0eee71f928d0) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 6 个月前 | |
bridge: mdb: Allow replace of a host-joined group [ Upstream commit d9e9f6d7b7d0c520bb87f19d2cbc57aeeb2091d5 ] Attempts to replace an MDB group membership of the host itself are currently bounced: # ip link add name br up type bridge vlan_filtering 1 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2 # bridge mdb replace dev br port br grp 239.0.0.1 vid 2 Error: bridge: Group is already joined by host. A similar operation done on a member port would succeed. Ignore the check for replacement of host group memberships as well. The bit of code that this enables is br_multicast_host_join(), which, for already-joined groups only refreshes the MC group expiration timer, which is desirable; and a userspace notification, also desirable. Change a selftest that exercises this code path from expecting a rejection to expecting a pass. The rest of MDB selftests pass without modification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 9ed3c1b11d7ef6bdd7649878933c4e61b53eb616) | 1 年前 | |
net: bridge: mrp: Update the Test frames for MRA According to the standard IEC 62439-2, in case the node behaves as MRA and needs to send Test frames on ring ports, then these Test frames need to have an Option TLV and a Sub-Option TLV which has the type AUTO_MGR. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
bridge: mrp: Use hlist_head instead of list_head for mrp Replace list_head with hlist_head for MRP list under the bridge. There is no need for a circular list when a linear list will work. This will also decrease the size of 'struct net_bridge'. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20201106215049.1448185-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 5 年前 | |
bridge: mrp: Extend br_mrp_switchdev to detect better the errors This patch extends the br_mrp_switchdev functions to be able to have a better understanding what cause the issue and if the SW needs to be used as a backup. There are the following cases: - when the code is compiled without CONFIG_NET_SWITCHDEV. In this case return success so the SW can continue with the protocol. Depending on the function, it returns 0 or BR_MRP_SW. - when code is compiled with CONFIG_NET_SWITCHDEV and the driver doesn't implement any MRP callbacks. In this case the HW can't run MRP so it just returns -EOPNOTSUPP. So the SW will stop further to configure the node. - when code is compiled with CONFIG_NET_SWITCHDEV and the driver fully supports any MRP functionality. In this case the SW doesn't need to do anything. The functions will return 0 or BR_MRP_HW. - when code is compiled with CONFIG_NET_SWITCHDEV and the HW can't run completely the protocol but it can help the SW to run it. For example, the HW can't support completely MRM role(can't detect when it stops receiving MRP Test frames) but it can redirect these frames to CPU. In this case it is possible to have a SW fallback. The SW will try initially to call the driver with sw_backup set to false, meaning that the HW should implement completely the role. If the driver returns -EOPNOTSUPP, the SW will try again with sw_backup set to false, meaning that the SW will detect when it stops receiving the frames but it needs HW support to redirect the frames to CPU. In case the driver returns 0 then the SW will continue to configure the node accordingly. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
net: bridge: fix MST static key usage [ Upstream commit ee87c63f9b2a418f698d79c2991347e31a7d2c27 ] As Ido pointed out, the static key usage in MST is buggy and should use inc/dec instead of enable/disable because we can have multiple bridges with MST enabled which means a single bridge can disable MST for all. Use static_branch_inc/dec to avoid that. When destroying a bridge decrement the key if MST was enabled. Fixes: ec7328b59176 ("net: bridge: mst: Multiple Spanning Tree (MST) mode") Reported-by: Ido Schimmel <idosch@nvidia.com> Closes: https://lore.kernel.org/netdev/20251104120313.1306566-1-razor@blackwall.org/T/#m6888d87658f94ed1725433940f4f4ebb00b5a68b Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20251105111919.1499702-3-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 1b29b6898ed8c0d55e078d02fcf6337b2fd77e52) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 8 个月前 | |
bridge: mcast: Fix a possible use-after-free when removing a bridge port [ Upstream commit 4df78ff02629c7729168f0696a7a2123c389818d ] When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: <IRQ> __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) </IRQ> Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/ Reported-by: Thomas Gleixner <tglx@kernel.org> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 1900ca8acb92fbea8bf9abef9927c7fed03db7fc) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 2 个月前 | |
treewide: Convert del_timer*() to timer_shutdown*() Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ] Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ] Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 3 年前 | |
netfilter: Remove the now superfluous sentinel elements from ctl_table array mainline inclusion from mainline-v6.10-rc1 category: performance This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) * Remove sentinel elements from ctl_table structs * Remove instances where an array element is zeroed out to make it look like a sentinel. This is not longer needed and is safe after commit c899710fe7f9 ("networking: Update to register_net_sysctl_sz") added the array size to the ctl_table registration * Remove the need for having __NF_SYSCTL_CT_LAST_SYSCTL as the sysctl array size is now in NF_SYSCTL_CT_LAST_SYSCTL * Remove extra element in ctl_table arrays declarations Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Conflicts: net/netfilter/nf_conntrack_standalone.c (cherry picked from commit 635470eb0aa71ba41c47593c66f65ac1e5d59dd7) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 1 个月前 | |
netfilter: bridge: replace physindev with physinif in nf_bridge_info [ Upstream commit 9874808878d9eed407e3977fd11fee49de1e1d86 ] An skb can be added to a neigh->arp_queue while waiting for an arp reply. Where original skb's skb->dev can be different to neigh's neigh->dev. For instance in case of bridging dnated skb from one veth to another, the skb would be added to a neigh->arp_queue of the bridge. As skb->dev can be reset back to nf_bridge->physindev and used, and as there is no explicit mechanism that prevents this physindev from been freed under us (for instance neigh_flush_dev doesn't cleanup skbs from different device's neigh queue) we can crash on e.g. this stack: arp_process neigh_update skb = __skb_dequeue(&neigh->arp_queue) neigh_resolve_output(..., skb) ... br_nf_dev_xmit br_nf_pre_routing_finish_bridge_slow skb->dev = nf_bridge->physindev br_handle_frame_finish Let's use plain ifindex instead of net_device link. To peek into the original net_device we will use dev_get_by_index_rcu(). Thus either we get device and are safe to use it or we don't get it and drop skb. Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c") Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org> | 2 年前 | |
bridge: Handle error of rtnl_register_module(). [ Upstream commit cba5e43b0b757734b1e79f624d93a71435e31136 ] Since introduced, br_vlan_rtnl_init() has been ignoring the returned value of rtnl_register_module(), which could fail silently. Handling the error allows users to view a module as an all-or-nothing thing in terms of the rtnetlink functionality. This prevents syzkaller from reporting spurious errors from its tests, where OOM often occurs and module is automatically loaded. Let's handle the errors by rtnl_register_many(). Fixes: 8dcea187088b ("net: bridge: vlan: add rtm definitions and dump support") Fixes: f26b296585dc ("net: bridge: vlan: add new rtm message support") Fixes: adb3ce9bcb0f ("net: bridge: vlan: add del rtm message support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 60bfd345cc9bc6539e0c1b842a6bf1a52250f89a) | 1 年前 | |
net: bridge: vlan: fix vlan range dumps starting with pvid [ Upstream commit 43171c97e4714bf601b468401b37732244639c21 ] There is a bug in all range dumps that rely on br_vlan_can_enter_range() when the PVID is a range starting VLAN, all following VLANs that match its flags can enter the range, but when the range is filled in only the PVID VLAN is dumped and the rest of the range is discarded because br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can be only one, we need to break ranges around it, the best way to do that consistently for all is to alter br_vlan_can_enter_range() to take into account the PVID and return false to break the range when it's matched. Before the fix: $ ip l add br0 type bridge vlan_filtering 1 $ ip l add dumdum type dummy $ ip l set dumdum master br0 $ ip l set br0 up $ ip l set dumdum up $ bridge vlan add dev dumdum vid 1 pvid untagged master $ bridge vlan add dev dumdum vid 2 untagged master $ bridge vlan show dev dumdum # use legacy dump to show all vlans port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 VLAN 2 is missing, and if there are more matching VLANs afterwards they'd be missing too. After the fix: [ same setup steps ] $ bridge vlan show dev dumdum port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 2 Egress Untagged state forwarding mcast_router 1 Fixes: 0ab558795184 ("net: bridge: vlan: add rtm range support") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 490011a38f437e30deb8e4c61540c8e17334e76e) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 9 天前 | |
bridge: netfilter: Fix forwarding of fragmented packets [ Upstream commit 91b6dbced0ef1d680afdd69b14fc83d50ebafaf3 ] When netfilter defrag hooks are loaded (due to the presence of conntrack rules, for example), fragmented packets entering the bridge will be defragged by the bridge's pre-routing hook (br_nf_pre_routing() -> ipv4_conntrack_defrag()). Later on, in the bridge's post-routing hook, the defragged packet will be fragmented again. If the size of the largest fragment is larger than what the kernel has determined as the destination MTU (using ip_skb_dst_mtu()), the defragged packet will be dropped. Before commit ac6627a28dbf ("net: ipv4: Consolidate ipv4_mtu and ip_dst_mtu_maybe_forward"), ip_skb_dst_mtu() would return dst_mtu() as the destination MTU. Assuming the dst entry attached to the packet is the bridge's fake rtable one, this would simply be the bridge's MTU (see fake_mtu()). However, after above mentioned commit, ip_skb_dst_mtu() ends up returning the route's MTU stored in the dst entry's metrics. Ideally, in case the dst entry is the bridge's fake rtable one, this should be the bridge's MTU as the bridge takes care of updating this metric when its MTU changes (see br_change_mtu()). Unfortunately, the last operation is a no-op given the metrics attached to the fake rtable entry are marked as read-only. Therefore, ip_skb_dst_mtu() ends up returning 1500 (the initial MTU value) and defragged packets are dropped during fragmentation when dealing with large fragments and high MTU (e.g., 9k). Fix by moving the fake rtable entry's metrics to be per-bridge (in a similar fashion to the fake rtable entry itself) and marking them as writable, thereby allowing MTU changes to be reflected. Fixes: 62fa8a846d7d ("net: Implement read-only protection and COW'ing of metrics.") Fixes: 33eb9873a283 ("bridge: initialize fake_rtable metrics") Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Closes: https://lore.kernel.org/netdev/PH0PR10MB4504888284FF4CBA648197D0ACB82@PH0PR10MB4504.namprd10.prod.outlook.com/ Tested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250515084848.727706-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit fa942824b9f4afaf0722a3e35c890dc538166e73) | 1 年前 | |
net: bridge: vlan: fix vlan range dumps starting with pvid [ Upstream commit 43171c97e4714bf601b468401b37732244639c21 ] There is a bug in all range dumps that rely on br_vlan_can_enter_range() when the PVID is a range starting VLAN, all following VLANs that match its flags can enter the range, but when the range is filled in only the PVID VLAN is dumped and the rest of the range is discarded because br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can be only one, we need to break ranges around it, the best way to do that consistently for all is to alter br_vlan_can_enter_range() to take into account the PVID and return false to break the range when it's matched. Before the fix: $ ip l add br0 type bridge vlan_filtering 1 $ ip l add dumdum type dummy $ ip l set dumdum master br0 $ ip l set br0 up $ ip l set dumdum up $ bridge vlan add dev dumdum vid 1 pvid untagged master $ bridge vlan add dev dumdum vid 2 untagged master $ bridge vlan show dev dumdum # use legacy dump to show all vlans port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 VLAN 2 is missing, and if there are more matching VLANs afterwards they'd be missing too. After the fix: [ same setup steps ] $ bridge vlan show dev dumdum port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 2 Egress Untagged state forwarding mcast_router 1 Fixes: 0ab558795184 ("net: bridge: vlan: add rtm range support") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 490011a38f437e30deb8e4c61540c8e17334e76e) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 9 天前 | |
bridge: cfm: Kernel space implementation of CFM. CCM frame RX added. This is the third commit of the implementation of the CFM protocol according to 802.1Q section 12.14. Functionality is extended with CCM frame reception. The MEP instance now contains CCM based status information. Most important is the CCM defect status indicating if correct CCM frames are received with the expected interval. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 5 年前 | |
net: bridge: multicast: use multicast contexts instead of bridge or port Pass multicast context pointers to multicast functions instead of bridge/port. This would make it easier later to switch these contexts to their per-vlan versions. The patch is basically search and replace, no functional changes. Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 4 年前 | |
net: bridge: mrp: Update the Test frames for MRA According to the standard IEC 62439-2, in case the node behaves as MRA and needs to send Test frames on ring ports, then these Test frames need to have an Option TLV and a Sub-Option TLV which has the type AUTO_MGR. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 5 年前 | |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
bridge: always declare tunnel functions When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still defined but have no prototype or caller. This causes a W=1 warning for the missing prototypes: net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes] net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes] The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING, and I coulnd't easily figure out the right set of #ifdefs, so just move the declarations out of the #ifdef to avoid the warning, at a small cost in code size over a more elaborate fix. Fixes: 188c67dd1906 ("net: bridge: vlan options: add support for tunnel id dumping") Fixes: 569da0822808 ("net: bridge: vlan options: add support for tunnel mapping set/del") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 3 年前 | |
bridge: stp: Fix a potential use-after-free when deleting a bridge [ Upstream commit 2a00517db8de4be7df3d483b215c5544fb30a191 ] The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Noam Rathaus <noamr@ssd-disclosure.com> Reported-by: Neil Young <contact@ssd-disclosure.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20260629072117.497959-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 4c40eec06eeac37c58e47a6058eb32901218d5d4) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 16 天前 | |
net: bridge: add STP xstats This adds rx_bpdu, tx_bpdu, rx_tcn, tx_tcn, transition_blk, transition_fwd xstats counters to the bridge ports copied over via netlink, providing useful information for STP. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> | 6 年前 | |
net: use eth_hw_addr_set() Convert sw drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 4 年前 | |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 7 年前 | |
net: bridge: Do not offload IGMP/MLD messages [ Upstream commit 683dc24da8bf199bb7446e445ad7f801c79a550e ] Do not offload IGMP/MLD messages as it could lead to IGMP/MLD Reports being unintentionally flooded to Hosts. Instead, let the bridge decide where to send these IGMP/MLD messages. Consider the case where the local host is sending out reports in response to a remote querier like the following: mcast-listener-process (IP_ADD_MEMBERSHIP) \ br0 / \ swp1 swp2 | | QUERIER SOME-OTHER-HOST In the above setup, br0 will want to br_forward() reports for mcast-listener-process's group(s) via swp1 to QUERIER; but since the source hwdom is 0, the report is eligible for tx offloading, and is flooded by hardware to both swp1 and swp2, reaching SOME-OTHER-HOST as well. (Example and illustration provided by Tobias.) Fixes: 472111920f1c ("net: bridge: switchdev: allow the TX data plane forwarding to be offloaded") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250716153551.1830255-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 7b0d42318393186f218b8a617ff3d0a01693274c) | 1 年前 | |
bridge: Fix flushing of dynamic FDB entries The following commands should result in all the dynamic FDB entries being flushed, but instead all the non-local (non-permanent) entries are flushed: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent This is because br_fdb_flush() works with FDB flags and not the corresponding enumerator values. Fix by passing the FDB flag instead. After the fix: # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic # ip link set dev br0 type bridge fdb_flush # bridge fdb show brport dummy1 00:aa:bb:cc:dd:ee master br0 static 00:00:00:00:00:01 master br0 permanent 33:33:00:00:00:01 self permanent 01:00:5e:00:00:01 self permanent Fixes: 1f78ee14eeac ("net: bridge: fdb: add support for fine-grained flushing") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 3 年前 | |
bridge: move from strlcpy with unused retval to strscpy Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220818210212.8347-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 3 年前 | |
net: bridge: vlan: fix vlan range dumps starting with pvid [ Upstream commit 43171c97e4714bf601b468401b37732244639c21 ] There is a bug in all range dumps that rely on br_vlan_can_enter_range() when the PVID is a range starting VLAN, all following VLANs that match its flags can enter the range, but when the range is filled in only the PVID VLAN is dumped and the rest of the range is discarded because br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can be only one, we need to break ranges around it, the best way to do that consistently for all is to alter br_vlan_can_enter_range() to take into account the PVID and return false to break the range when it's matched. Before the fix: $ ip l add br0 type bridge vlan_filtering 1 $ ip l add dumdum type dummy $ ip l set dumdum master br0 $ ip l set br0 up $ ip l set dumdum up $ bridge vlan add dev dumdum vid 1 pvid untagged master $ bridge vlan add dev dumdum vid 2 untagged master $ bridge vlan show dev dumdum # use legacy dump to show all vlans port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 VLAN 2 is missing, and if there are more matching VLANs afterwards they'd be missing too. After the fix: [ same setup steps ] $ bridge vlan show dev dumdum port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 2 Egress Untagged state forwarding mcast_router 1 Fixes: 0ab558795184 ("net: bridge: vlan: add rtm range support") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 490011a38f437e30deb8e4c61540c8e17334e76e) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 9 天前 | |
net: bridge: vlan: fix vlan range dumps starting with pvid [ Upstream commit 43171c97e4714bf601b468401b37732244639c21 ] There is a bug in all range dumps that rely on br_vlan_can_enter_range() when the PVID is a range starting VLAN, all following VLANs that match its flags can enter the range, but when the range is filled in only the PVID VLAN is dumped and the rest of the range is discarded because br_vlan_fill_vids() checks for the PVID flag. Since the PVID VLAN can be only one, we need to break ranges around it, the best way to do that consistently for all is to alter br_vlan_can_enter_range() to take into account the PVID and return false to break the range when it's matched. Before the fix: $ ip l add br0 type bridge vlan_filtering 1 $ ip l add dumdum type dummy $ ip l set dumdum master br0 $ ip l set br0 up $ ip l set dumdum up $ bridge vlan add dev dumdum vid 1 pvid untagged master $ bridge vlan add dev dumdum vid 2 untagged master $ bridge vlan show dev dumdum # use legacy dump to show all vlans port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 VLAN 2 is missing, and if there are more matching VLANs afterwards they'd be missing too. After the fix: [ same setup steps ] $ bridge vlan show dev dumdum port vlan-id dumdum 1 PVID Egress Untagged 2 Egress Untagged $ bridge -d vlan show dev dumdum # use the new dump (RTM_GETVLAN) port vlan-id dumdum 1 PVID Egress Untagged state forwarding mcast_router 1 2 Egress Untagged state forwarding mcast_router 1 Fixes: 0ab558795184 ("net: bridge: vlan: add rtm range support") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20260721140922.682265-2-razor@blackwall.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 490011a38f437e30deb8e4c61540c8e17334e76e) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 9 天前 | |
bridge: fix C-VLAN preservation in 802.1ad vlan_tunnel egress [ Upstream commit 3128df6be147768fe536986fbb85db1d37806a9f ] When using an 802.1ad bridge with vlan_tunnel, the C-VLAN tag is incorrectly stripped from frames during egress processing. br_handle_egress_vlan_tunnel() uses skb_vlan_pop() to remove the S-VLAN from hwaccel before VXLAN encapsulation. However, skb_vlan_pop() also moves any "next" VLAN from the payload into hwaccel: /* move next vlan tag to hw accel tag */ __skb_vlan_pop(skb, &vlan_tci); __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci); For QinQ frames where the C-VLAN sits in the payload, this moves it to hwaccel where it gets lost during VXLAN encapsulation. Fix by calling __vlan_hwaccel_clear_tag() directly, which clears only the hwaccel S-VLAN and leaves the payload untouched. This path is only taken when vlan_tunnel is enabled and tunnel_info is configured, so 802.1Q bridges are unaffected. Tested with 802.1ad bridge + VXLAN vlan_tunnel, verified C-VLAN preserved in VXLAN payload via tcpdump. Fixes: 11538d039ac6 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by: Alexandre Knecht <knecht.alexandre@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20251228020057.2788865-1-knecht.alexandre@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 4c8facf028ec7ef8a3a70da2039189322e6250cb) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 6 个月前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 9 天前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 8 个月前 | ||
| 2 个月前 | ||
| 16 天前 | ||
| 16 天前 | ||
| 4 个月前 | ||
| 2 个月前 | ||
| 8 个月前 | ||
| 16 天前 | ||
| 4 个月前 | ||
| 6 个月前 | ||
| 1 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 8 个月前 | ||
| 2 个月前 | ||
| 3 年前 | ||
| 1 个月前 | ||
| 2 年前 | ||
| 1 年前 | ||
| 9 天前 | ||
| 1 年前 | ||
| 9 天前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 16 天前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 7 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 9 天前 | ||
| 9 天前 | ||
| 6 个月前 |