/****************************************************************************
 * arch/xtensa/include/esp32s3/tie-asm.h
 * Compile-time HAL assembler definitions dependent on CORE & TIE
 * configuration
 *
 *  NOTE:  This header file is not meant to be included directly.
 *
 * This header file contains assembly-language definitions (assembly
 * macros, etc.) for this specific Xtensa processor's TIE extensions
 * and options.  It is customized to this Xtensa processor configuration.
 *
 * Customer ID=15128; Build=0x90f1f;
 * Copyright (c) 1999-2021 Cadence Design Systems Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be included
 * in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
 * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 ****************************************************************************/

#ifndef __ARCH_XTENSA_INCLUDE_ESP32S3_TIE_ASM_H
#define __ARCH_XTENSA_INCLUDE_ESP32S3_TIE_ASM_H

/*  Selection parameter values for save-area save/restore macros:  */
/*  Option vs. TIE:  */
#define XTHAL_SAS_TIE	0x0001	/* custom extension or coprocessor */
#define XTHAL_SAS_OPT	0x0002	/* optional (and not a coprocessor) */
#define XTHAL_SAS_ANYOT	0x0003	/* both of the above */
/*  Whether used automatically by compiler:  */
#define XTHAL_SAS_NOCC	0x0004	/* not used by compiler w/o special opts/code */
#define XTHAL_SAS_CC	0x0008	/* used by compiler without special opts/code */
#define XTHAL_SAS_ANYCC	0x000C	/* both of the above */
/*  ABI handling across function calls:  */
#define XTHAL_SAS_CALR	0x0010	/* caller-saved */
#define XTHAL_SAS_CALE	0x0020	/* callee-saved */
#define XTHAL_SAS_GLOB	0x0040	/* global across function calls (in thread) */
#define XTHAL_SAS_ANYABI	0x0070	/* all of the above three */
/*  Misc  */
#define XTHAL_SAS_ALL	0xFFFF	/* include all default NCP contents */
#define XTHAL_SAS3(optie,ccuse,abi)	( ((optie) & XTHAL_SAS_ANYOT)  \
					| ((ccuse) & XTHAL_SAS_ANYCC)  \
					| ((abi)   & XTHAL_SAS_ANYABI) )


    /*
      *  Macro to store all non-coprocessor (extra) custom TIE and optional state
      *  (not including zero-overhead loop registers).
      *  Required parameters:
      *      ptr         Save area pointer address register (clobbered)
      *                  (register must contain a 4 byte aligned address).
      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
      *                  registers are clobbered, the remaining are unused).
      *  Optional parameters:
      *      continue    If macro invoked as part of a larger store sequence, set to 1
      *                  if this is not the first in the sequence.  Defaults to 0.
      *      ofs         Offset from start of larger sequence (from value of first ptr
      *                  in sequence) at which to store.  Defaults to next available space
      *                  (or 0 if <continue> is 0).
      *      select      Select what category(ies) of registers to store, as a bitmask
      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
      *      alloc       Select what category(ies) of registers to allocate; if any
      *                  category is selected here that is not in <select>, space for
      *                  the corresponding registers is skipped without doing any store.
      */
    .macro xchal_ncp_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
	xchal_sa_start	\continue, \ofs
	// Optional global registers used by default by the compiler:
	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
	xchal_sa_align	\ptr, 0, 1016, 4, 4
	rur.THREADPTR	\at1		// threadptr option
	s32i	\at1, \ptr, .Lxchal_ofs_+0
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 1016, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
	.endif
	// Optional caller-saved registers used by default by the compiler:
	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 1012, 4, 4
	rsr.ACCLO	\at1		// MAC16 option
	s32i	\at1, \ptr, .Lxchal_ofs_+0
	rsr.ACCHI	\at1		// MAC16 option
	s32i	\at1, \ptr, .Lxchal_ofs_+4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 1012, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
	.endif
	// Optional caller-saved registers not used by default by the compiler:
	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 996, 4, 4
	rsr.BR	\at1		// boolean option
	s32i	\at1, \ptr, .Lxchal_ofs_+0
	rsr.SCOMPARE1	\at1		// conditional store option
	s32i	\at1, \ptr, .Lxchal_ofs_+4
	rsr.M0	\at1		// MAC16 option
	s32i	\at1, \ptr, .Lxchal_ofs_+8
	rsr.M1	\at1		// MAC16 option
	s32i	\at1, \ptr, .Lxchal_ofs_+12
	rsr.M2	\at1		// MAC16 option
	s32i	\at1, \ptr, .Lxchal_ofs_+16
	rsr.M3	\at1		// MAC16 option
	s32i	\at1, \ptr, .Lxchal_ofs_+20
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 996, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
	.endif
    .endm	// xchal_ncp_store

    /*
      *  Macro to load all non-coprocessor (extra) custom TIE and optional state
      *  (not including zero-overhead loop registers).
      *  Required parameters:
      *      ptr         Save area pointer address register (clobbered)
      *                  (register must contain a 4 byte aligned address).
      *      at1..at4    Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
      *                  registers are clobbered, the remaining are unused).
      *  Optional parameters:
      *      continue    If macro invoked as part of a larger load sequence, set to 1
      *                  if this is not the first in the sequence.  Defaults to 0.
      *      ofs         Offset from start of larger sequence (from value of first ptr
      *                  in sequence) at which to load.  Defaults to next available space
      *                  (or 0 if <continue> is 0).
      *      select      Select what category(ies) of registers to load, as a bitmask
      *                  (see XTHAL_SAS_xxx constants).  Defaults to all registers.
      *      alloc       Select what category(ies) of registers to allocate; if any
      *                  category is selected here that is not in <select>, space for
      *                  the corresponding registers is skipped without doing any load.
      */
    .macro xchal_ncp_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
	xchal_sa_start	\continue, \ofs
	// Optional global registers used by default by the compiler:
	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\select)
	xchal_sa_align	\ptr, 0, 1016, 4, 4
	l32i	\at1, \ptr, .Lxchal_ofs_+0
	wur.THREADPTR	\at1		// threadptr option
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 1016, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 4
	.endif
	// Optional caller-saved registers used by default by the compiler:
	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 1012, 4, 4
	l32i	\at1, \ptr, .Lxchal_ofs_+0
	wsr.ACCLO	\at1		// MAC16 option
	l32i	\at1, \ptr, .Lxchal_ofs_+4
	wsr.ACCHI	\at1		// MAC16 option
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 1012, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 8
	.endif
	// Optional caller-saved registers not used by default by the compiler:
	.ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 996, 4, 4
	l32i	\at1, \ptr, .Lxchal_ofs_+0
	wsr.BR	\at1		// boolean option
	l32i	\at1, \ptr, .Lxchal_ofs_+4
	wsr.SCOMPARE1	\at1		// conditional store option
	l32i	\at1, \ptr, .Lxchal_ofs_+8
	wsr.M0	\at1		// MAC16 option
	l32i	\at1, \ptr, .Lxchal_ofs_+12
	wsr.M1	\at1		// MAC16 option
	l32i	\at1, \ptr, .Lxchal_ofs_+16
	wsr.M2	\at1		// MAC16 option
	l32i	\at1, \ptr, .Lxchal_ofs_+20
	wsr.M3	\at1		// MAC16 option
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
	.elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 996, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 24
	.endif
    .endm	// xchal_ncp_load


#define XCHAL_NCP_NUM_ATMPS	1

    /*
     *  Macro to store the state of TIE coprocessor FPU.
     *  Required parameters:
     *      ptr         Save area pointer address register (clobbered)
     *                  (register must contain a 4 byte aligned address).
     *      at1..at4    Four temporary address registers (first XCHAL_CP0_NUM_ATMPS
     *                  registers are clobbered, the remaining are unused).
     *  Optional parameters are the same as for xchal_ncp_store.
     */
#define xchal_cp_FPU_store	xchal_cp0_store
    .macro	xchal_cp0_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
	xchal_sa_start \continue, \ofs
	// Custom caller-saved registers not used by default by the compiler:
	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 948, 4, 4
	rur.FCR	\at1		// ureg 232
	s32i	\at1, \ptr, .Lxchal_ofs_+0
	rur.FSR	\at1		// ureg 233
	s32i	\at1, \ptr, .Lxchal_ofs_+4
	ssi	f0, \ptr, .Lxchal_ofs_+8
	ssi	f1, \ptr, .Lxchal_ofs_+12
	ssi	f2, \ptr, .Lxchal_ofs_+16
	ssi	f3, \ptr, .Lxchal_ofs_+20
	ssi	f4, \ptr, .Lxchal_ofs_+24
	ssi	f5, \ptr, .Lxchal_ofs_+28
	ssi	f6, \ptr, .Lxchal_ofs_+32
	ssi	f7, \ptr, .Lxchal_ofs_+36
	ssi	f8, \ptr, .Lxchal_ofs_+40
	ssi	f9, \ptr, .Lxchal_ofs_+44
	ssi	f10, \ptr, .Lxchal_ofs_+48
	ssi	f11, \ptr, .Lxchal_ofs_+52
	ssi	f12, \ptr, .Lxchal_ofs_+56
	ssi	f13, \ptr, .Lxchal_ofs_+60
	ssi	f14, \ptr, .Lxchal_ofs_+64
	ssi	f15, \ptr, .Lxchal_ofs_+68
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 948, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
	.endif
    .endm	// xchal_cp0_store

    /*
     *  Macro to load the state of TIE coprocessor FPU.
     *  Required parameters:
     *      ptr         Save area pointer address register (clobbered)
     *                  (register must contain a 4 byte aligned address).
     *      at1..at4    Four temporary address registers (first XCHAL_CP0_NUM_ATMPS
     *                  registers are clobbered, the remaining are unused).
     *  Optional parameters are the same as for xchal_ncp_load.
     */
#define xchal_cp_FPU_load	xchal_cp0_load
    .macro	xchal_cp0_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
	xchal_sa_start \continue, \ofs
	// Custom caller-saved registers not used by default by the compiler:
	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 948, 4, 4
	l32i	\at1, \ptr, .Lxchal_ofs_+0
	wur.FCR	\at1		// ureg 232
	l32i	\at1, \ptr, .Lxchal_ofs_+4
	wur.FSR	\at1		// ureg 233
	lsi	f0, \ptr, .Lxchal_ofs_+8
	lsi	f1, \ptr, .Lxchal_ofs_+12
	lsi	f2, \ptr, .Lxchal_ofs_+16
	lsi	f3, \ptr, .Lxchal_ofs_+20
	lsi	f4, \ptr, .Lxchal_ofs_+24
	lsi	f5, \ptr, .Lxchal_ofs_+28
	lsi	f6, \ptr, .Lxchal_ofs_+32
	lsi	f7, \ptr, .Lxchal_ofs_+36
	lsi	f8, \ptr, .Lxchal_ofs_+40
	lsi	f9, \ptr, .Lxchal_ofs_+44
	lsi	f10, \ptr, .Lxchal_ofs_+48
	lsi	f11, \ptr, .Lxchal_ofs_+52
	lsi	f12, \ptr, .Lxchal_ofs_+56
	lsi	f13, \ptr, .Lxchal_ofs_+60
	lsi	f14, \ptr, .Lxchal_ofs_+64
	lsi	f15, \ptr, .Lxchal_ofs_+68
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 948, 4, 4
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 72
	.endif
    .endm	// xchal_cp0_load

#define XCHAL_CP0_NUM_ATMPS	1
    /*
     *  Macro to store the state of TIE coprocessor cop_ai.
     *  Required parameters:
     *      ptr         Save area pointer address register (clobbered)
     *                  (register must contain a 16 byte aligned address).
     *      at1..at4    Four temporary address registers (first XCHAL_CP3_NUM_ATMPS
     *                  registers are clobbered, the remaining are unused).
     *  Optional parameters are the same as for xchal_ncp_store.
     */
#define xchal_cp_cop_ai_store	xchal_cp3_store
    .macro	xchal_cp3_store  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
	xchal_sa_start \continue, \ofs
	// Custom caller-saved registers not used by default by the compiler:
	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 0, 16, 16
	rur.ACCX_0	\at1		// ureg 0
	s32i	\at1, \ptr, .Lxchal_ofs_+0
	rur.ACCX_1	\at1		// ureg 1
	s32i	\at1, \ptr, .Lxchal_ofs_+4
	rur.QACC_H_0	\at1		// ureg 2
	s32i	\at1, \ptr, .Lxchal_ofs_+8
	rur.QACC_H_1	\at1		// ureg 3
	s32i	\at1, \ptr, .Lxchal_ofs_+12
	rur.QACC_H_2	\at1		// ureg 4
	s32i	\at1, \ptr, .Lxchal_ofs_+16
	rur.QACC_H_3	\at1		// ureg 5
	s32i	\at1, \ptr, .Lxchal_ofs_+20
	rur.QACC_H_4	\at1		// ureg 6
	s32i	\at1, \ptr, .Lxchal_ofs_+24
	rur.QACC_L_0	\at1		// ureg 7
	s32i	\at1, \ptr, .Lxchal_ofs_+28
	rur.QACC_L_1	\at1		// ureg 8
	s32i	\at1, \ptr, .Lxchal_ofs_+32
	rur.QACC_L_2	\at1		// ureg 9
	s32i	\at1, \ptr, .Lxchal_ofs_+36
	rur.QACC_L_3	\at1		// ureg 10
	s32i	\at1, \ptr, .Lxchal_ofs_+40
	rur.QACC_L_4	\at1		// ureg 11
	s32i	\at1, \ptr, .Lxchal_ofs_+44
	rur.SAR_BYTE	\at1		// ureg 13
	s32i	\at1, \ptr, .Lxchal_ofs_+48
	rur.FFT_BIT_WIDTH	\at1		// ureg 14
	s32i	\at1, \ptr, .Lxchal_ofs_+52
	rur.UA_STATE_0	\at1		// ureg 15
	s32i	\at1, \ptr, .Lxchal_ofs_+56
	rur.UA_STATE_1	\at1		// ureg 16
	s32i	\at1, \ptr, .Lxchal_ofs_+60
	rur.UA_STATE_2	\at1		// ureg 17
	s32i	\at1, \ptr, .Lxchal_ofs_+64
	rur.UA_STATE_3	\at1		// ureg 18
	s32i	\at1, \ptr, .Lxchal_ofs_+68
	st.qr	q0, \ptr, .Lxchal_ofs_+80
	st.qr	q1, \ptr, .Lxchal_ofs_+96
	st.qr	q2, \ptr, .Lxchal_ofs_+112
	addi	\ptr, \ptr, 128
	st.qr	q3, \ptr, .Lxchal_ofs_+0
	st.qr	q4, \ptr, .Lxchal_ofs_+16
	st.qr	q5, \ptr, .Lxchal_ofs_+32
	st.qr	q6, \ptr, .Lxchal_ofs_+48
	st.qr	q7, \ptr, .Lxchal_ofs_+64
	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 128
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 80
	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 0, 16, 16
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 208
	.endif
    .endm	// xchal_cp3_store

    /*
     *  Macro to load the state of TIE coprocessor cop_ai.
     *  Required parameters:
     *      ptr         Save area pointer address register (clobbered)
     *                  (register must contain a 16 byte aligned address).
     *      at1..at4    Four temporary address registers (first XCHAL_CP3_NUM_ATMPS
     *                  registers are clobbered, the remaining are unused).
     *  Optional parameters are the same as for xchal_ncp_load.
     */
#define xchal_cp_cop_ai_load	xchal_cp3_load
    .macro	xchal_cp3_load  ptr at1 at2 at3 at4  continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
	xchal_sa_start \continue, \ofs
	// Custom caller-saved registers not used by default by the compiler:
	.ifeq (XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
	xchal_sa_align	\ptr, 0, 0, 16, 16
	l32i	\at1, \ptr, .Lxchal_ofs_+0
	wur.ACCX_0	\at1		// ureg 0
	l32i	\at1, \ptr, .Lxchal_ofs_+4
	wur.ACCX_1	\at1		// ureg 1
	l32i	\at1, \ptr, .Lxchal_ofs_+8
	wur.QACC_H_0	\at1		// ureg 2
	l32i	\at1, \ptr, .Lxchal_ofs_+12
	wur.QACC_H_1	\at1		// ureg 3
	l32i	\at1, \ptr, .Lxchal_ofs_+16
	wur.QACC_H_2	\at1		// ureg 4
	l32i	\at1, \ptr, .Lxchal_ofs_+20
	wur.QACC_H_3	\at1		// ureg 5
	l32i	\at1, \ptr, .Lxchal_ofs_+24
	wur.QACC_H_4	\at1		// ureg 6
	l32i	\at1, \ptr, .Lxchal_ofs_+28
	wur.QACC_L_0	\at1		// ureg 7
	l32i	\at1, \ptr, .Lxchal_ofs_+32
	wur.QACC_L_1	\at1		// ureg 8
	l32i	\at1, \ptr, .Lxchal_ofs_+36
	wur.QACC_L_2	\at1		// ureg 9
	l32i	\at1, \ptr, .Lxchal_ofs_+40
	wur.QACC_L_3	\at1		// ureg 10
	l32i	\at1, \ptr, .Lxchal_ofs_+44
	wur.QACC_L_4	\at1		// ureg 11
	l32i	\at1, \ptr, .Lxchal_ofs_+48
	wur.SAR_BYTE	\at1		// ureg 13
	l32i	\at1, \ptr, .Lxchal_ofs_+52
	wur.FFT_BIT_WIDTH	\at1		// ureg 14
	l32i	\at1, \ptr, .Lxchal_ofs_+56
	wur.UA_STATE_0	\at1		// ureg 15
	l32i	\at1, \ptr, .Lxchal_ofs_+60
	wur.UA_STATE_1	\at1		// ureg 16
	l32i	\at1, \ptr, .Lxchal_ofs_+64
	wur.UA_STATE_2	\at1		// ureg 17
	l32i	\at1, \ptr, .Lxchal_ofs_+68
	wur.UA_STATE_3	\at1		// ureg 18
	ld.qr	q0, \ptr, .Lxchal_ofs_+80
	ld.qr	q1, \ptr, .Lxchal_ofs_+96
	ld.qr	q2, \ptr, .Lxchal_ofs_+112
	addi	\ptr, \ptr, 128
	ld.qr	q3, \ptr, .Lxchal_ofs_+0
	ld.qr	q4, \ptr, .Lxchal_ofs_+16
	ld.qr	q5, \ptr, .Lxchal_ofs_+32
	ld.qr	q6, \ptr, .Lxchal_ofs_+48
	ld.qr	q7, \ptr, .Lxchal_ofs_+64
	.set	.Lxchal_pofs_, .Lxchal_pofs_ + 128
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 80
	.elseif ((XTHAL_SAS_TIE | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
	xchal_sa_align	\ptr, 0, 0, 16, 16
	.set	.Lxchal_ofs_, .Lxchal_ofs_ + 208
	.endif
    .endm	// xchal_cp3_load

#define XCHAL_CP3_NUM_ATMPS	1
#define XCHAL_SA_NUM_ATMPS	1

	/*  Empty macros for unconfigured coprocessors:  */
	.macro xchal_cp1_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp1_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp2_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp2_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp4_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp4_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp5_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp5_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp6_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp6_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp7_store	p a b c d continue=0 ofs=-1 select=-1 ; .endm
	.macro xchal_cp7_load	p a b c d continue=0 ofs=-1 select=-1 ; .endm

#endif /* __ARCH_XTENSA_INCLUDE_ESP32S3_TIE_ASM_H */