* arch/xtensa/src/esp32/esp32_spi_slave.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifdef CONFIG_ESP32_SPI
#include <sys/param.h>
#include <sys/types.h>
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <time.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/clock.h>
#include <nuttx/semaphore.h>
#include <nuttx/spinlock.h>
#include <nuttx/spi/spi.h>
#include <nuttx/spi/slave.h>
#include <arch/board/board.h>
#include "esp32_spi.h"
#include "esp32_gpio.h"
#include "esp32_irq.h"
#include "esp32_dma.h"
#include "xtensa.h"
#include "hardware/esp32_gpio_sigmap.h"
#include "hardware/esp32_dport.h"
#include "hardware/esp32_spi.h"
#include "hardware/esp32_soc.h"
#include "hardware/esp32_pinmap.h"
* Private Types
****************************************************************************/
#ifdef CONFIG_ESP32_SPI2
# if defined(CONFIG_ESP32_SPI2_SLAVE_IO_RW)
# define ESP32_SPI2_IO ESP32_SPI_IO_RW
# elif defined(CONFIG_ESP32_SPI2_SLAVE_IO_RO)
# define ESP32_SPI2_IO ESP32_SPI_IO_R
# elif defined(CONFIG_ESP32_SPI2_SLAVE_IO_WO)
# define ESP32_SPI2_IO ESP32_SPI_IO_W
# endif
#endif
#ifdef CONFIG_ESP32_SPI3
# if defined(CONFIG_ESP32_SPI3_SLAVE_IO_RW)
# define ESP32_SPI3_IO ESP32_SPI_IO_RW
# elif defined(CONFIG_ESP32_SPI3_SLAVE_IO_RO)
# define ESP32_SPI3_IO ESP32_SPI_IO_R
# elif defined(CONFIG_ESP32_SPI3_SLAVE_IO_WO)
# define ESP32_SPI3_IO ESP32_SPI_IO_W
# endif
#endif
#if defined(CONFIG_ESP32_SPI2_SLAVE_IO_RW) || \
defined(CONFIG_ESP32_SPI2_SLAVE_IO_WO) || \
defined(CONFIG_ESP32_SPI3_SLAVE_IO_RW) || \
defined(CONFIG_ESP32_SPI3_SLAVE_IO_WO)
# define ESP32_SPI_SLAVE_HAS_TX
#endif
#define SPI_SLAVE_BUFSIZE (CONFIG_SPI_SLAVE_BUFSIZE)
#define SPI_DMA_CHANNEL_MAX (2)
#if SPI_SLAVE_BUFSIZE % ESP32_DMA_BUFLEN_MAX
# define SPI_DMADESC_NUM (SPI_SLAVE_BUFSIZE / ESP32_DMA_BUFLEN_MAX + 1)
#else
# define SPI_DMADESC_NUM (SPI_SLAVE_BUFSIZE / ESP32_DMA_BUFLEN_MAX)
#endif
#define SPI_DMA_RESET_MASK (SPI_AHBM_RST_M | SPI_AHBM_FIFO_RST_M | \
SPI_OUT_RST_M | SPI_IN_RST_M)
#define WORDS2BYTES(_priv, _wn) (_wn * ((_priv)->nbits / 8))
#define BYTES2WORDS(_priv, _bn) (_bn / ((_priv)->nbits / 8))
struct esp32_spislv_config_s
{
uint32_t reg_base;
enum spi_mode_e mode;
uint8_t cs_pin;
uint8_t mosi_pin;
uint8_t miso_pin;
uint8_t clk_pin;
uint8_t periph;
uint8_t irq;
uint32_t clk_bit;
uint32_t rst_bit;
bool use_dma;
uint8_t dma_chan_s;
uint8_t dma_chan;
uint32_t dma_clk_bit;
uint32_t dma_rst_bit;
uint32_t cs_insig;
uint32_t cs_outsig;
uint32_t mosi_insig;
uint32_t mosi_outsig;
uint32_t miso_insig;
uint32_t miso_outsig;
uint32_t clk_insig;
uint32_t clk_outsig;
uint32_t flags;
};
struct esp32_spislv_priv_s
{
struct spi_slave_ctrlr_s ctrlr;
struct spi_slave_dev_s *dev;
const struct esp32_spislv_config_s *config;
uint8_t cpu;
int cpuint;
enum spi_mode_e mode;
uint8_t nbits;
int refs;
#ifdef ESP32_SPI_SLAVE_HAS_TX
uint32_t txlen;
uint8_t txbuffer[SPI_SLAVE_BUFSIZE];
bool txen;
#endif
uint32_t rxlen;
uint8_t rxbuffer[SPI_SLAVE_BUFSIZE];
bool process;
bool dma_chan;
spinlock_t lock;
};
* Private Function Prototypes
****************************************************************************/
static void esp32_spislv_setmode(struct spi_slave_ctrlr_s *ctrlr,
enum spi_mode_e mode);
static void esp32_spislv_setbits(struct spi_slave_ctrlr_s *ctrlr,
int nbits);
static int esp32_spislv_interrupt(int irq, void *context, void *arg);
static void esp32_spislv_initialize(struct spi_slave_ctrlr_s *ctrlr);
static void esp32_spislv_bind(struct spi_slave_ctrlr_s *ctrlr,
struct spi_slave_dev_s *dev,
enum spi_slave_mode_e mode,
int nbits);
static void esp32_spislv_unbind(struct spi_slave_ctrlr_s *ctrlr);
static int esp32_spislv_enqueue(struct spi_slave_ctrlr_s *ctrlr,
const void *data,
size_t nwords);
static bool esp32_spislv_qfull(struct spi_slave_ctrlr_s *ctrlr);
static void esp32_spislv_qflush(struct spi_slave_ctrlr_s *ctrlr);
static size_t esp32_spislv_qpoll(struct spi_slave_ctrlr_s *ctrlr);
* Private Data
****************************************************************************/
#ifdef CONFIG_ESP32_SPI2
static const struct esp32_spislv_config_s esp32_spi2_config =
{
.reg_base = REG_SPI_BASE(2),
.mode = SPIDEV_MODE0,
.cs_pin = CONFIG_ESP32_SPI2_CSPIN,
.mosi_pin = CONFIG_ESP32_SPI2_MOSIPIN,
.miso_pin = CONFIG_ESP32_SPI2_MISOPIN,
.clk_pin = CONFIG_ESP32_SPI2_CLKPIN,
.periph = ESP32_PERIPH_SPI2,
.irq = ESP32_IRQ_SPI2,
.clk_bit = DPORT_SPI_CLK_EN_2,
.rst_bit = DPORT_SPI_RST_2,
#ifdef CONFIG_ESP32_SPI2_DMA
.use_dma = true,
#else
.use_dma = false,
#endif
.dma_chan_s = 2,
.dma_chan = 1,
.dma_clk_bit = DPORT_SPI_DMA_CLK_EN,
.dma_rst_bit = DPORT_SPI_DMA_RST,
.cs_insig = HSPICS0_IN_IDX,
.cs_outsig = HSPICS0_OUT_IDX,
.mosi_insig = HSPID_IN_IDX,
.mosi_outsig = HSPID_OUT_IDX,
.miso_insig = HSPIQ_IN_IDX,
.miso_outsig = HSPIQ_OUT_IDX,
.clk_insig = HSPICLK_IN_IDX,
.clk_outsig = HSPICLK_OUT_IDX,
.flags = ESP32_SPI2_IO
};
static const struct spi_slave_ctrlrops_s esp32_spi2slv_ops =
{
.bind = esp32_spislv_bind,
.unbind = esp32_spislv_unbind,
.enqueue = esp32_spislv_enqueue,
.qfull = esp32_spislv_qfull,
.qflush = esp32_spislv_qflush,
.qpoll = esp32_spislv_qpoll
};
static struct esp32_spislv_priv_s esp32_spi2slv_priv =
{
.ctrlr =
{
.ops = &esp32_spi2slv_ops
},
.config = &esp32_spi2_config,
.mode = SPIDEV_MODE3
};
#endif
#ifdef CONFIG_ESP32_SPI3
static const struct esp32_spislv_config_s esp32_spi3_config =
{
.reg_base = REG_SPI_BASE(3),
.mode = SPIDEV_MODE0,
.cs_pin = CONFIG_ESP32_SPI3_CSPIN,
.mosi_pin = CONFIG_ESP32_SPI3_MOSIPIN,
.miso_pin = CONFIG_ESP32_SPI3_MISOPIN,
.clk_pin = CONFIG_ESP32_SPI3_CLKPIN,
.periph = ESP32_PERIPH_SPI3,
.irq = ESP32_IRQ_SPI3,
.clk_bit = DPORT_SPI_CLK_EN,
.rst_bit = DPORT_SPI_RST,
#ifdef CONFIG_ESP32_SPI3_DMA
.use_dma = true,
#else
.use_dma = false,
#endif
.dma_chan_s = 4,
.dma_chan = 2,
.dma_clk_bit = DPORT_SPI_DMA_CLK_EN,
.dma_rst_bit = DPORT_SPI_DMA_RST,
.cs_insig = VSPICS0_IN_IDX,
.cs_outsig = VSPICS0_OUT_IDX,
.mosi_insig = VSPID_IN_IDX,
.mosi_outsig = VSPID_OUT_IDX,
.miso_insig = VSPIQ_IN_IDX,
.miso_outsig = VSPIQ_OUT_IDX,
.clk_insig = VSPICLK_IN_IDX,
.clk_outsig = VSPICLK_OUT_MUX_IDX,
.flags = ESP32_SPI3_IO
};
static const struct spi_slave_ctrlrops_s esp32_spi3slv_ops =
{
.bind = esp32_spislv_bind,
.unbind = esp32_spislv_unbind,
.enqueue = esp32_spislv_enqueue,
.qfull = esp32_spislv_qfull,
.qflush = esp32_spislv_qflush,
.qpoll = esp32_spislv_qpoll
};
static struct esp32_spislv_priv_s esp32_spi3slv_priv =
{
.ctrlr =
{
.ops = &esp32_spi3slv_ops
},
.config = &esp32_spi3_config,
.mode = SPIDEV_MODE3
};
#endif
struct esp32_dmadesc_s s_rx_desc[SPI_DMA_CHANNEL_MAX][SPI_DMADESC_NUM];
#ifdef ESP32_SPI_SLAVE_HAS_TX
struct esp32_dmadesc_s s_tx_desc[SPI_DMA_CHANNEL_MAX][SPI_DMADESC_NUM];
#endif
* Private Functions
****************************************************************************/
* Name: esp32_spi_set_reg
*
* Description:
* Set the contents of the SPI register at offset
*
* Input Parameters:
* priv - Private SPI device structure
* offset - Offset to the register of interest
* value - Value to be written
*
* Returned Value:
* None
*
****************************************************************************/
static inline void esp32_spi_set_reg(struct esp32_spislv_priv_s *priv,
int offset,
uint32_t value)
{
putreg32(value, priv->config->reg_base + offset);
}
* Name: esp32_spi_get_reg
*
* Description:
* Get the contents of the SPI register at offset
*
* Input Parameters:
* priv - Private SPI device structure
* offset - Offset to the register of interest
*
* Returned Value:
* The contents of the register
*
****************************************************************************/
static inline uint32_t esp32_spi_get_reg(struct esp32_spislv_priv_s *priv,
int offset)
{
return getreg32(priv->config->reg_base + offset);
}
* Name: esp32_spi_set_regbits
*
* Description:
* Set the bits of the SPI register at offset
*
* Input Parameters:
* priv - Private SPI device structure
* offset - Offset to the register of interest
* bits - Bits to be set
*
* Returned Value:
* None
*
****************************************************************************/
static inline void esp32_spi_set_regbits(struct esp32_spislv_priv_s *priv,
int offset,
uint32_t bits)
{
uint32_t tmp = getreg32(priv->config->reg_base + offset);
putreg32(tmp | bits, priv->config->reg_base + offset);
}
* Name: esp32_spi_reset_regbits
*
* Description:
* Clear the bits of the SPI register at offset
*
* Input Parameters:
* priv - Private SPI device structure
* offset - Offset to the register of interest
* bits - Bits to be cleared
*
* Returned Value:
* None
*
****************************************************************************/
static inline void esp32_spi_reset_regbits(struct esp32_spislv_priv_s *priv,
int offset,
uint32_t bits)
{
uint32_t tmp = getreg32(priv->config->reg_base + offset);
putreg32(tmp & (~bits), priv->config->reg_base + offset);
}
* Name: esp32_spi_iomux
*
* Description:
* Check if the option SPI GPIO pins can use IOMUX directly
*
* Input Parameters:
* priv - Private SPI device structure
*
* Returned Value:
* True if can use IOMUX or false if can't.
*
****************************************************************************/
static inline bool esp32_spi_iomux(struct esp32_spislv_priv_s *priv)
{
bool mapped = false;
const struct esp32_spislv_config_s *cfg = priv->config;
if (REG_SPI_BASE(2) == cfg->reg_base)
{
if ((!(cfg->flags & ESP32_SPI_IO_W) ||
cfg->mosi_pin == SPI2_IOMUX_MOSIPIN) &&
#ifdef ESP32_SPI_SLAVE_HAS_TX
(!(cfg->flags & ESP32_SPI_IO_R) ||
cfg->miso_pin == SPI2_IOMUX_MISOPIN) &&
#endif
cfg->cs_pin == SPI2_IOMUX_CSPIN &&
cfg->clk_pin == SPI2_IOMUX_CLKPIN)
{
mapped = true;
}
}
else if (REG_SPI_BASE(3) == cfg->reg_base)
{
if ((!(cfg->flags & ESP32_SPI_IO_W) ||
cfg->mosi_pin == SPI3_IOMUX_MOSIPIN) &&
#ifdef ESP32_SPI_SLAVE_HAS_TX
(!(cfg->flags & ESP32_SPI_IO_R) ||
cfg->miso_pin == SPI3_IOMUX_MISOPIN) &&
#endif
cfg->cs_pin == SPI3_IOMUX_CSPIN &&
cfg->clk_pin == SPI3_IOMUX_CLKPIN)
{
mapped = true;
}
}
return mapped;
}
* Name: esp32_spislv_setmode
*
* Description:
* Set the SPI Slave mode.
*
* Input Parameters:
* ctrlr - SPI Slave controller interface instance
* mode - Requested SPI Slave mode
*
* Returned Value:
* None.
*
****************************************************************************/
static void esp32_spislv_setmode(struct spi_slave_ctrlr_s *ctrlr,
enum spi_mode_e mode)
{
uint32_t ck_idle_edge;
uint32_t ck_in_edge;
uint32_t miso_delay_mode;
uint32_t miso_delay_num;
uint32_t mosi_delay_mode;
uint32_t mosi_delay_num;
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
spiinfo("mode=%d\n", mode);
if (mode != priv->mode)
{
switch (mode)
{
case SPISLAVE_MODE0:
if (priv->dma_chan)
{
ck_idle_edge = 0;
ck_in_edge = 1;
miso_delay_mode = 0;
miso_delay_num = 1;
mosi_delay_mode = 0;
mosi_delay_num = 1;
}
else
{
ck_idle_edge = 1;
ck_in_edge = 0;
miso_delay_mode = 0;
miso_delay_num = 0;
mosi_delay_mode = 2;
mosi_delay_num = 2;
}
break;
case SPISLAVE_MODE1:
ck_idle_edge = 1;
ck_in_edge = 1;
miso_delay_mode = 2;
miso_delay_num = 0;
mosi_delay_mode = 0;
mosi_delay_num = 0;
break;
case SPISLAVE_MODE2:
if (priv->dma_chan)
{
ck_idle_edge = 1;
ck_in_edge = 0;
miso_delay_mode = 0;
miso_delay_num = 1;
mosi_delay_mode = 0;
mosi_delay_num = 1;
}
else
{
ck_idle_edge = 0;
ck_in_edge = 1;
miso_delay_mode = 0;
miso_delay_num = 0;
mosi_delay_mode = 1;
mosi_delay_num = 2;
}
break;
case SPISLAVE_MODE3:
ck_idle_edge = 0;
ck_in_edge = 0;
miso_delay_mode = 1;
miso_delay_num = 0;
mosi_delay_mode = 0;
mosi_delay_num = 0;
break;
default:
return;
}
esp32_spi_reset_regbits(priv,
SPI_PIN_OFFSET,
SPI_CK_IDLE_EDGE_M);
esp32_spi_set_regbits(priv,
SPI_PIN_OFFSET,
(ck_idle_edge << SPI_CK_IDLE_EDGE_S));
esp32_spi_reset_regbits(priv,
SPI_USER_OFFSET,
SPI_CK_I_EDGE_M);
esp32_spi_set_regbits(priv,
SPI_USER_OFFSET,
(ck_in_edge << SPI_CK_I_EDGE_S));
esp32_spi_reset_regbits(priv,
SPI_CTRL2_OFFSET,
SPI_MISO_DELAY_MODE_M |
SPI_MISO_DELAY_NUM_M |
SPI_MOSI_DELAY_NUM_M |
SPI_MOSI_DELAY_MODE_M);
esp32_spi_set_regbits(priv,
SPI_CTRL2_OFFSET,
(miso_delay_mode << SPI_MISO_DELAY_MODE_S) |
(miso_delay_num << SPI_MISO_DELAY_NUM_S) |
(mosi_delay_mode << SPI_MOSI_DELAY_MODE_S) |
(mosi_delay_num << SPI_MOSI_DELAY_NUM_S));
priv->mode = mode;
}
}
* Name: esp32_spislv_setbits
*
* Description:
* Set the number of bits per word.
*
* Input Parameters:
* ctrlr - SPI Slave controller interface instance
* nbits - The number of bits in an SPI word
*
* Returned Value:
* None.
*
****************************************************************************/
static void esp32_spislv_setbits(struct spi_slave_ctrlr_s *ctrlr,
int nbits)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
spiinfo("nbits=%d\n", nbits);
if (nbits != priv->nbits)
{
priv->nbits = nbits;
}
}
* Name: esp32_io_interrupt
*
* Description:
* Common I/O interrupt handler
*
* Input Parameters:
* arg - I/O controller private data
*
* Returned Value:
* Standard interrupt return value.
*
****************************************************************************/
static int esp32_io_interrupt(int irq, void *context, void *arg)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)arg;
if (priv->process == true)
{
priv->process = false;
SPIS_DEV_SELECT(priv->dev, false);
}
return 0;
}
* Name: esp32_spislv_tx
*
* Description:
* Process SPI slave TX.
*
* DMA mode : Initialize register to prepare for TX
* Non-DMA mode: Fill data to TX register
*
* Input Parameters:
* priv - Private SPI device structure
*
* Returned Value:
* None
*
****************************************************************************/
#ifdef ESP32_SPI_SLAVE_HAS_TX
static void esp32_spislv_tx(struct esp32_spislv_priv_s *priv)
{
int i;
uint32_t regval;
if (priv->dma_chan)
{
esp32_dma_init(s_tx_desc[priv->dma_chan - 1], SPI_DMADESC_NUM,
priv->txbuffer, priv->txlen);
regval = (uint32_t)s_tx_desc[priv->dma_chan - 1] & SPI_OUTLINK_ADDR_V;
esp32_spi_set_reg(priv, SPI_DMA_OUT_LINK_OFFSET,
regval | SPI_OUTLINK_START_M);
esp32_spi_set_reg(priv, SPI_SLV_WRBUF_DLEN_OFFSET,
priv->txlen * 8 - 1);
esp32_spi_set_regbits(priv, SPI_USER_OFFSET, SPI_USR_MISO_M);
}
else
{
for (i = 0; i < priv->txlen; i += 4)
{
esp32_spi_set_reg(priv, SPI_W8_OFFSET + i,
*(uint32_t *)(&priv->txbuffer[i]));
}
esp32_spi_set_regbits(priv, SPI_USER_OFFSET, SPI_USR_MISO_M);
}
}
#endif
* Name: esp32_spislv_rx
*
* Description:
* Process SPI slave RX. Process SPI slave device receive callback by
* calling SPIS_DEV_RECEIVE and prepare for next RX.
*
* DMA mode : Initialize register to prepare for RX
*
* Input Parameters:
* priv - Private SPI device structure
*
* Returned Value:
* None
*
****************************************************************************/
static void esp32_spislv_rx(struct esp32_spislv_priv_s *priv)
{
uint32_t tmp;
uint32_t recv_n;
uint32_t regval;
tmp = SPIS_DEV_RECEIVE(priv->dev, priv->rxbuffer,
BYTES2WORDS(priv, priv->rxlen));
recv_n = WORDS2BYTES(priv, tmp);
if (priv->dma_chan)
{
DEBUGASSERT((recv_n % 4) == 0);
}
if (recv_n < priv->rxlen)
{
* buffer, move the rest data to head of the buffer
*/
priv->rxlen -= recv_n;
memmove(priv->rxbuffer, priv->rxbuffer + recv_n, priv->rxlen);
}
else
{
priv->rxlen = 0;
}
if (priv->dma_chan)
{
tmp = SPI_SLAVE_BUFSIZE - priv->rxlen;
if (tmp)
{
esp32_dma_init(s_rx_desc[priv->dma_chan - 1], SPI_DMADESC_NUM,
priv->rxbuffer + priv->rxlen, tmp);
regval = (uint32_t)s_rx_desc[priv->dma_chan - 1] &
SPI_INLINK_ADDR_V;
esp32_spi_set_reg(priv, SPI_DMA_IN_LINK_OFFSET,
regval | SPI_INLINK_START_M);
esp32_spi_set_reg(priv, SPI_SLV_RDBUF_DLEN_OFFSET, tmp * 8 - 1);
esp32_spi_set_regbits(priv, SPI_USER_OFFSET, SPI_USR_MOSI_M);
}
}
}
* Name: esp32_spislv_interrupt
*
* Description:
* Common SPI interrupt handler
*
* Input Parameters:
* arg - SPI controller private data
*
* Returned Value:
* Standard interrupt return value.
*
****************************************************************************/
static int esp32_spislv_interrupt(int irq, void *context, void *arg)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)arg;
uint32_t n;
uint32_t tmp;
int i;
esp32_spi_reset_regbits(priv, SPI_SLAVE_OFFSET, SPI_TRANS_DONE_M);
if (priv->dma_chan)
{
esp32_spi_set_regbits(priv, SPI_DMA_CONF_OFFSET, SPI_DMA_RESET_MASK);
esp32_spi_reset_regbits(priv, SPI_DMA_CONF_OFFSET, SPI_DMA_RESET_MASK);
}
if (priv->process == false)
{
SPIS_DEV_SELECT(priv->dev, true);
priv->process = true;
}
n = (esp32_spi_get_reg(priv, SPI_SLV_RD_BIT_OFFSET) + 1) / 8;
if (!priv->dma_chan)
{
* to receive buffer
*/
for (i = 0; i < n; i += 4)
{
tmp = esp32_spi_get_reg(priv, SPI_W0_OFFSET + i);
memcpy(priv->rxbuffer + priv->rxlen + i, &tmp, 4);
}
SPIS_DEV_NOTIFY(priv->dev, SPISLAVE_RX_COMPLETE);
}
priv->rxlen += n;
esp32_spislv_rx(priv);
#ifdef ESP32_SPI_SLAVE_HAS_TX
if (priv->txen)
{
if (n < priv->txlen)
{
priv->txlen -= n;
memmove(priv->txbuffer, priv->txbuffer + n, priv->txlen);
}
else
{
priv->txlen = 0;
priv->txen = false;
}
SPIS_DEV_NOTIFY(priv->dev, SPISLAVE_TX_COMPLETE);
}
if (priv->txlen)
{
esp32_spislv_tx(priv);
priv->txen = true;
}
#endif
if (priv->process == true && esp32_gpioread(priv->config->cs_pin))
{
priv->process = false;
SPIS_DEV_SELECT(priv->dev, false);
esp32_spi_reset_regbits(priv, SPI_SLAVE_OFFSET, SPI_TRANS_DONE_M);
}
return 0;
}
* Name: esp32_spislv_initialize
*
* Description:
* Initialize ESP32 SPI Slave hardware interface
*
* Input Parameters:
* ctrlr - SPI Slave controller interface instance
*
* Returned Value:
* None
*
****************************************************************************/
static void esp32_spislv_initialize(struct spi_slave_ctrlr_s *ctrlr)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
const struct esp32_spislv_config_s *config = priv->config;
uint32_t regval;
esp32_gpiowrite(config->cs_pin, 1);
esp32_gpiowrite(config->clk_pin, 1);
if (config->flags & ESP32_SPI_IO_R)
{
esp32_gpiowrite(config->mosi_pin, 1);
}
#ifdef ESP32_SPI_SLAVE_HAS_TX
if (config->flags & ESP32_SPI_IO_W)
{
esp32_gpiowrite(config->miso_pin, 1);
}
#endif
if (esp32_spi_iomux(priv))
{
esp32_configgpio(config->cs_pin, INPUT_FUNCTION_2 | PULLUP);
esp32_configgpio(config->clk_pin, INPUT_FUNCTION_2 | PULLUP);
#ifdef ESP32_SPI_SLAVE_HAS_TX
if (config->flags & ESP32_SPI_IO_W)
{
esp32_configgpio(config->miso_pin, OUTPUT_FUNCTION_2);
}
#endif
if (config->flags & ESP32_SPI_IO_R)
{
esp32_configgpio(config->mosi_pin, INPUT_FUNCTION_2 | PULLUP);
}
}
else
{
esp32_configgpio(config->cs_pin, INPUT_FUNCTION_3 | PULLUP);
esp32_gpio_matrix_out(config->cs_pin, config->cs_outsig, 0, 0);
esp32_gpio_matrix_in(config->cs_pin, config->cs_insig, 0);
esp32_configgpio(config->clk_pin, INPUT_FUNCTION_3 | PULLUP);
esp32_gpio_matrix_out(config->clk_pin, config->clk_outsig, 0, 0);
esp32_gpio_matrix_in(config->clk_pin, config->clk_insig, 0);
if (config->flags & ESP32_SPI_IO_R)
{
esp32_configgpio(config->mosi_pin, INPUT_FUNCTION_3 | PULLUP);
esp32_gpio_matrix_out(config->mosi_pin, config->mosi_outsig, 0, 0);
esp32_gpio_matrix_in(config->mosi_pin, config->mosi_insig, 0);
}
#ifdef ESP32_SPI_SLAVE_HAS_TX
if (config->flags & ESP32_SPI_IO_W)
{
esp32_configgpio(config->miso_pin, OUTPUT_FUNCTION_3);
esp32_gpio_matrix_out(config->miso_pin, config->miso_outsig, 0, 0);
esp32_gpio_matrix_in(config->miso_pin, config->miso_insig, 0);
}
#endif
}
modifyreg32(DPORT_PERIP_CLK_EN_REG, 0, config->clk_bit);
modifyreg32(DPORT_PERIP_RST_EN_REG, config->rst_bit, 0);
esp32_spi_set_reg(priv, SPI_USER_OFFSET, SPI_DOUTDIN_M |
SPI_USR_MOSI_M |
SPI_USR_MISO_M |
SPI_USR_MISO_HIGHPART_M);
esp32_spi_set_reg(priv, SPI_USER1_OFFSET, 0);
esp32_spi_set_reg(priv, SPI_PIN_OFFSET, SPI_CS1_DIS_M | SPI_CS2_DIS_M);
esp32_spi_set_reg(priv, SPI_CTRL_OFFSET, 0);
esp32_spi_set_reg(priv, SPI_CTRL2_OFFSET, 0);
esp32_spi_set_reg(priv, SPI_USER2_OFFSET, 0);
esp32_spi_set_reg(priv, SPI_CLOCK_OFFSET, 0);
esp32_spi_set_reg(priv, SPI_SLAVE_OFFSET, SPI_SLAVE_MODE_M |
SPI_SLV_WR_RD_BUF_EN_M |
SPI_INT_EN_M);
if (priv->dma_chan)
{
modifyreg32(DPORT_PERIP_CLK_EN_REG, 0, config->dma_clk_bit);
modifyreg32(DPORT_PERIP_RST_EN_REG, config->dma_rst_bit, 0);
modifyreg32(DPORT_SPI_DMA_CHAN_SEL_REG, 0,
(config->dma_chan << config->dma_chan_s));
#ifdef ESP32_SPI_SLAVE_HAS_TX
esp32_spi_set_reg(priv, SPI_DMA_CONF_OFFSET, SPI_OUT_DATA_BURST_EN_M |
SPI_INDSCR_BURST_EN_M |
SPI_OUTDSCR_BURST_EN_M);
#else
esp32_spi_set_reg(priv, SPI_DMA_CONF_OFFSET, SPI_INDSCR_BURST_EN_M);
#endif
esp32_dma_init(s_rx_desc[priv->dma_chan - 1], SPI_DMADESC_NUM,
priv->rxbuffer, SPI_SLAVE_BUFSIZE);
regval = (uint32_t)s_rx_desc[priv->dma_chan - 1] & SPI_INLINK_ADDR_V;
esp32_spi_set_reg(priv, SPI_DMA_IN_LINK_OFFSET,
regval | SPI_INLINK_START_M);
esp32_spi_set_reg(priv, SPI_SLV_RDBUF_DLEN_OFFSET,
SPI_SLAVE_BUFSIZE * 8 - 1);
#ifdef ESP32_SPI_SLAVE_HAS_TX
esp32_spi_set_reg(priv, SPI_SLV_WRBUF_DLEN_OFFSET,
SPI_SLAVE_BUFSIZE * 8 - 1);
#endif
esp32_spi_set_regbits(priv, SPI_USER_OFFSET, SPI_USR_MOSI_M);
}
else
{
#ifdef ESP32_SPI_SLAVE_HAS_TX
esp32_spi_set_reg(priv, SPI_SLV_WRBUF_DLEN_OFFSET, 256 - 1);
#endif
esp32_spi_set_reg(priv, SPI_SLV_RDBUF_DLEN_OFFSET, 256 - 1);
}
esp32_spislv_setmode(ctrlr, config->mode);
esp32_spislv_setbits(ctrlr, 8);
esp32_spi_set_regbits(priv, SPI_SLAVE_OFFSET, SPI_SYNC_RESET_M);
esp32_spi_reset_regbits(priv, SPI_SLAVE_OFFSET, SPI_SYNC_RESET_M);
esp32_gpioirqenable(ESP32_PIN2IRQ(config->cs_pin), RISING);
esp32_spi_reset_regbits(priv, SPI_SLAVE_OFFSET, SPI_TRANS_DONE_M);
}
* Name: esp32_spislv_deinit
*
* Description:
* Deinitialize ESP32 SPI Slave hardware interface
*
* Input Parameters:
* ctrlr - SPI Slave controller interface instance
*
* Returned Value:
* None
*
****************************************************************************/
static void esp32_spislv_deinit(struct spi_slave_ctrlr_s *ctrlr)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
esp32_gpioirqdisable(ESP32_PIN2IRQ(priv->config->cs_pin));
esp32_spi_reset_regbits(priv, SPI_SLAVE_OFFSET, SPI_INT_EN_M);
if (priv->dma_chan)
{
modifyreg32(DPORT_PERIP_RST_EN_REG, 0, priv->config->dma_rst_bit);
modifyreg32(DPORT_PERIP_CLK_EN_REG, priv->config->dma_clk_bit, 0);
}
modifyreg32(DPORT_PERIP_RST_EN_REG, 0, priv->config->clk_bit);
modifyreg32(DPORT_PERIP_CLK_EN_REG, priv->config->clk_bit, 0);
priv->mode = SPIDEV_MODE0;
priv->nbits = 0;
#ifdef ESP32_SPI_SLAVE_HAS_TX
priv->txlen = 0;
priv->txen = false;
#endif
priv->rxlen = 0;
priv->process = false;
priv->dma_chan = false;
}
* Name: esp32_spislv_bind
*
* Description:
* Bind the SPI slave device interface to the SPI slave controller
* interface and configure the SPI interface. Upon return, the SPI
* slave controller driver is fully operational and ready to perform
* transfers.
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
* dev - SPI slave device interface instance
* mode - The SPI Slave mode requested
* nbits - The number of bits requested
*
* Returned Value:
* none
*
****************************************************************************/
static void esp32_spislv_bind(struct spi_slave_ctrlr_s *ctrlr,
struct spi_slave_dev_s *dev,
enum spi_slave_mode_e mode,
int nbits)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
irqstate_t flags;
spiinfo("dev=%p mode=%d nbits=%d\n", dev, mode, nbits);
DEBUGASSERT(priv != NULL && priv->dev == NULL && dev != NULL);
flags = spin_lock_irqsave(&priv->lock);
priv->dev = dev;
SPIS_DEV_SELECT(dev, false);
SPIS_DEV_CMDDATA(dev, false);
priv->rxlen = 0;
#ifdef ESP32_SPI_SLAVE_HAS_TX
priv->txlen = 0;
priv->txen = false;
#endif
esp32_spislv_initialize(ctrlr);
esp32_spislv_setmode(ctrlr, mode);
esp32_spislv_setbits(ctrlr, nbits);
up_enable_irq(priv->config->irq);
esp32_spi_set_regbits(priv, SPI_CMD_OFFSET, SPI_USR_M);
spin_unlock_irqrestore(&priv->lock, flags);
}
* Name: esp32_spislv_unbind
*
* Description:
* Un-bind the SPI slave device interface from the SPI slave controller
* interface. Reset the SPI interface and restore the SPI slave
* controller driver to its initial state,
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
*
* Returned Value:
* none
*
****************************************************************************/
static void esp32_spislv_unbind(struct spi_slave_ctrlr_s *ctrlr)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
irqstate_t flags;
DEBUGASSERT(priv != NULL);
spiinfo("Unbinding %p\n", priv->dev);
DEBUGASSERT(priv->dev != NULL);
flags = spin_lock_irqsave(&priv->lock);
up_disable_irq(priv->config->irq);
esp32_gpioirqdisable(ESP32_PIN2IRQ(priv->config->cs_pin));
esp32_spi_reset_regbits(priv, SPI_SLAVE_OFFSET, SPI_INT_EN_M);
if (priv->dma_chan)
{
modifyreg32(DPORT_PERIP_CLK_EN_REG, priv->config->dma_clk_bit, 0);
}
modifyreg32(DPORT_PERIP_CLK_EN_REG, priv->config->clk_bit, 0);
priv->dev = NULL;
spin_unlock_irqrestore(&priv->lock, flags);
}
* Name: esp32_spislv_enqueue
*
* Description:
* Enqueue the next value to be shifted out from the interface. This adds
* the word the controller driver for a subsequent transfer but has no
* effect on anyin-process or currently "committed" transfers
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
* data - Command/data mode data value to be shifted out. The width of
* the data must be the same as the nbits parameter previously
* provided to the bind() methods.
*
* Returned Value:
* Zero if the word was successfully queue; A negated errno valid is
* returned on any failure to enqueue the word (such as if the queue is
* full).
*
****************************************************************************/
static int esp32_spislv_enqueue(struct spi_slave_ctrlr_s *ctrlr,
const void *data,
size_t nwords)
{
#ifdef ESP32_SPI_SLAVE_HAS_TX
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
size_t n = WORDS2BYTES(priv, nwords);
size_t bufsize;
irqstate_t flags;
int ret;
spiinfo("spi_enqueue(ctrlr=%p, data=%p, nwords=%d)\n",
ctrlr, data, nwords);
DEBUGASSERT(priv != NULL && priv->dev != NULL);
flags = spin_lock_irqsave(&priv->lock);
bufsize = SPI_SLAVE_BUFSIZE - priv->txlen;
if (!bufsize)
{
ret = -ENOSPC;
}
else
{
n = MIN(n, bufsize);
memcpy(priv->txbuffer + priv->txlen, data, n);
priv->txlen += n;
ret = OK;
if (priv->process == false)
{
esp32_spislv_tx(priv);
priv->txen = true;
}
}
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
#else
return -ENOSYS;
#endif
}
* Name: esp32_spislv_qfull
*
* Description:
* Return true if the queue is full or false if there is space to add an
* additional word to the queue.
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
*
* Returned Value:
* true if the output wueue is full
*
****************************************************************************/
static bool esp32_spislv_qfull(struct spi_slave_ctrlr_s *ctrlr)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
irqstate_t flags;
bool ret = 0;
DEBUGASSERT(priv != NULL && priv->dev != NULL);
spiinfo("spi_qfull(ctrlr=%p)\n", ctrlr);
flags = spin_lock_irqsave(&priv->lock);
#ifdef ESP32_SPI_SLAVE_HAS_TX
ret = priv->txlen == SPI_SLAVE_BUFSIZE;
#else
ret = false;
#endif
spin_unlock_irqrestore(&priv->lock, flags);
return ret;
}
* Name: esp32_spislv_qflush
*
* Description:
* Discard all saved values in the output queue. On return from this
* function the output queue will be empty. Any in-progress or otherwise
* "committed" output values may not be flushed.
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
*
* Returned Value:
* None
*
****************************************************************************/
static void esp32_spislv_qflush(struct spi_slave_ctrlr_s *ctrlr)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
irqstate_t flags;
DEBUGASSERT(priv != NULL && priv->dev != NULL);
flags = spin_lock_irqsave(&priv->lock);
priv->rxlen = 0;
#ifdef ESP32_SPI_SLAVE_HAS_TX
priv->txlen = 0;
priv->txen = false;
#endif
spin_unlock_irqrestore(&priv->lock, flags);
}
* Name: esp32_spislv_qpoll
*
* Description:
* Tell the controller to output all the receive queue data.
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
*
* Returned Value:
* Number of units of width "nbits" left in the rx queue. If the device
* accepted all the data, the return value will be 0
*
****************************************************************************/
static size_t esp32_spislv_qpoll(struct spi_slave_ctrlr_s *ctrlr)
{
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
irqstate_t flags;
uint32_t n;
DEBUGASSERT(priv != NULL && priv->dev != NULL);
flags = spin_lock_irqsave(&priv->lock);
esp32_spislv_rx(priv);
n = priv->rxlen;
spin_unlock_irqrestore(&priv->lock, flags);
return n;
}
* Name: esp32_spislv_ctrlr_initialize
*
* Description:
* Initialize the selected SPI slave bus
*
* Input Parameters:
* Port number (for hardware that has multiple SPI slave interfaces)
*
* Returned Value:
* Valid SPI slave device structure reference on success; a NULL on failure
*
****************************************************************************/
struct spi_slave_ctrlr_s *esp32_spislv_ctrlr_initialize(int port)
{
int ret;
struct spi_slave_ctrlr_s *spislv_dev;
struct esp32_spislv_priv_s *priv;
irqstate_t flags;
switch (port)
{
#ifdef CONFIG_ESP32_SPI2
case 2:
priv = &esp32_spi2slv_priv;
break;
#endif
#ifdef CONFIG_ESP32_SPI3
case 3:
priv = &esp32_spi3slv_priv;
break;
#endif
default:
return NULL;
}
spislv_dev = (struct spi_slave_ctrlr_s *)priv;
flags = spin_lock_irqsave(&priv->lock);
if ((volatile int)priv->refs != 0)
{
spin_unlock_irqrestore(&priv->lock, flags);
return spislv_dev;
}
if (priv->config->use_dma)
{
priv->dma_chan = priv->config->dma_chan;
}
else
{
priv->dma_chan = 0;
}
DEBUGVERIFY(irq_attach(ESP32_PIN2IRQ(priv->config->cs_pin),
esp32_io_interrupt,
priv));
priv->cpu = this_cpu();
priv->cpuint = esp32_setup_irq(priv->cpu, priv->config->periph,
1, ESP32_CPUINT_LEVEL);
ret = irq_attach(priv->config->irq, esp32_spislv_interrupt, priv);
if (ret != OK)
{
esp32_teardown_irq(priv->cpu, priv->config->periph, priv->cpuint);
spin_unlock_irqrestore(&priv->lock, flags);
return NULL;
}
priv->refs++;
spin_unlock_irqrestore(&priv->lock, flags);
return spislv_dev;
}
* Name: esp32_spislv_ctrlr_uninitialize
*
* Description:
* Uninitialize an SPI slave bus
*
* Input Parameters:
* ctrlr - SPI slave controller interface instance
*
* Returned Value:
* OK if success or fail
*
****************************************************************************/
int esp32_spislv_ctrlr_uninitialize(struct spi_slave_ctrlr_s *ctrlr)
{
irqstate_t flags;
struct esp32_spislv_priv_s *priv = (struct esp32_spislv_priv_s *)ctrlr;
DEBUGASSERT(ctrlr);
if (priv->refs == 0)
{
return ERROR;
}
flags = spin_lock_irqsave(&priv->lock);
if (--priv->refs)
{
spin_unlock_irqrestore(&priv->lock, flags);
return OK;
}
up_disable_irq(priv->config->irq);
esp32_teardown_irq(priv->cpu, priv->config->periph, priv->cpuint);
esp32_spislv_deinit(ctrlr);
spin_unlock_irqrestore(&priv->lock, flags);
return OK;
}
#endif