@
issue变更为 [已取消/已挂起] 状态前，请操作者填写相关原因
请按如下格式评论原因后，重新进行操作

/reason xxxxxx

Welcome To openEuler Community

Hey @tong_1001 , thanks for your contribution to the community.

Bot Usage Manual

I'm the Bot here serving you. You can find the instructions on how to interact with me at Here . That means you can comment below every pull request or issue to trigger Bot Commands. You can self-configure the PR merge rules for this repository. For more details, please refer to Here.

Contact Guide

If you have any questions, please contact the SIG: Kernel ,
and any of the maintainers: @hanjunguo, @oekernel, @sanglipeng, @wkfxxx, @zeng_zhaorong ,
and any of the committers: @CTC-XiboWang, @Frank_Sae, @GoGo_phytium, @GongLei-, @LiuYongQiang0816, @SuperSix173, @Tankll2021, @TrueAI, @YiweiZ, @allen-shi, @alvin-ling, @baratta, @bibo_mao, @caixu-blue, @chen-jun-hw, @chenjiesong, @chenjunxin1992, @chenke2026, @chiqijun, @chriszjh, @duanqiangwen, @eingesch, @fangfeng123, @fanghaiqinghw, @gang_he, @gaojuxin09, @gouhao2022, @guohaocs2c, @guzitao, @hanjunguo, @hanliyang, @hellotcc, @henryze, @hewanhan, @hjx_gitff, @hongwu-wang, @howard_lu, @htforge, @hu-chunzhi, @hunan4222, @jackknight, @jerry_lilijun, @jiayi0118, @junlong-zheng, @juntianlinux, @kailiu42, @kaitiandu, @kazero00, @kevinzhu1, @kile2009, @klmengkd, @koishimind, @kongzizaixian, @kunlun_spurs, @kylin-mayukun, @leoliu-oc, @li-huisong, @linan888, @linyunsheng, @liulongfang, @liyihang0226, @lostway1, @lujialin2, @mao-hongbo, @markyuan4ta21, @mawupeng, @mingqian218472, @mingrui-liu, @mufengyan, @nebulamatrix_rdma, @peterpangogogo, @pigalsofine, @robinorg, @rock_hw, @sanglipeng, @shu-shengming, @shuaijiakun, @siyanteng, @sming56_admin, @stavewu, @stkid, @sun_nanyong, @wangboe2022, @wanghang73, @wenzhiwei11, @whoisxxx, @wkfxxx, @woqidaideshi, @wsoydl, @xingmz1, @xukuohai, @yeweihua999, @ygn-ndwd-official, @yonghu_4dc5, @young-sun, @yubo-liu1, @yuehaibing_planb, @yuzenghui1, @zhang-changzhong, @zhangyi089, @zhujianwei001, @zichengqu, @zouyipeng, @zqiao216 .

以下的要求不是强制性的, 未按模板评论时对issue无任何影响
issue处理注意事项:
1. 当前issue受影响的分支提交pr时, 须在pr描述中填写当前issue编号进行关联, 否则无法关闭当前issue;
2. 模板内容需要填写完整, 无论是受影响或者不受影响都需要填写完整内容,未引入的分支不需要填写, 否则无法关闭当前issue;
3. 以下为模板中需要填写完整的内容, 请复制到评论区回复, 注: 内容的标题名称(影响性分析说明, 缺陷严重等级, 受影响版本排查(受影响/不受影响), 修复是否涉及abi变化(是/否))不能省略,省略后defect-manager将无法正常解析填写内容.
评论区可能使用到的指令说明:

影响性分析说明:

缺陷严重等级:(Critical/High/Moderate/Low)

缺陷根因说明:

受影响版本排查(受影响/不受影响):

1. openEuler-20.03-LTS-SP4:
2. openEuler-22.03-LTS-SP4:
3. openEuler-24.03-LTS-SP1:
4. openEuler-24.03-LTS-SP3:
5. openEuler-24.03-LTS-SP4:

abi变化(是/否):

1. openEuler-20.03-LTS-SP4:
2. openEuler-22.03-LTS-SP4:
3. openEuler-24.03-LTS-SP1:
4. openEuler-24.03-LTS-SP3:
5. openEuler-24.03-LTS-SP4:

缺陷issue处理具体操作请参考:
https://atomgit.com/openeuler/cve-manager/blob/master/cve-vulner-manager/doc/md/defect-manager-manual.md
pr关联issue具体操作请参考:
https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

/assign

udma新增检测：https://atomgit.com/openeuler/kernel/pull/24177 详见：udma_get_tp_type_available

影响性分析说明：sentry驱动urma建链失败，reboot/panic事件消息无法通过urma通道广播。

缺陷严重等级:(Critical/High/Moderate/Low)
Low
缺陷根因说明:
udma在创建jetty时新增校验tp_type类型(详见：https://atomgit.com/openeuler/kernel/pull/24177)，校验失败则无法创建jetty，对于sentry驱动来说就是urma建链失败，sentry驱动需要适配该变更。

受影响版本排查(受影响/不受影响):
openEuler-20.03-LTS-SP4:不受影响
openEuler-22.03-LTS-SP4:不受影响
openEuler-24.03-LTS-SP1:不受影响
openEuler-24.03-LTS-SP3:受影响
openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
openEuler-20.03-LTS-SP4:否
openEuler-22.03-LTS-SP4:否
openEuler-24.03-LTS-SP1:否
openEuler-24.03-LTS-SP3:否
openEuler-24.03-LTS-SP4:否

@tong_1001 经过defect-manager解析，已分析的内容如下表所示:

请确认分析内容的准确性，确认无误后，您可以进行后续步骤，否则您可以继续分析

@tong_1001
关闭issue前,需要将受影响的分支在合并pr时关联上当前issue编号: #9999
受影响分支: openEuler-24.03-LTS-SP3/openEuler-24.03-LTS-SP4
具体操作参考: https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

/close

@tong_1001
关闭issue前,需要将受影响的分支在合并pr时关联上当前issue编号: #9999
受影响分支: openEuler-24.03-LTS-SP3/openEuler-24.03-LTS-SP4
具体操作参考: https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

误报，issue已关联

影响性分析说明：sentry驱动urma建链失败，reboot/panic事件消息无法通过urma通道广播。

缺陷严重等级:(Critical/High/Moderate/Low)
Low
缺陷根因说明:
udma在创建jetty时新增校验tp_type类型(详见：https://atomgit.com/openeuler/kernel/pull/24177)，校验失败则无法创建jetty，对于sentry驱动来说就是urma建链失败，sentry驱动需要适配该变更。

受影响版本排查(受影响/不受影响):
openEuler-20.03-LTS-SP4:不受影响
openEuler-22.03-LTS-SP4:不受影响
openEuler-24.03-LTS-SP1:不受影响
openEuler-24.03-LTS-SP3:不受影响
openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
openEuler-20.03-LTS-SP4:否
openEuler-22.03-LTS-SP4:否
openEuler-24.03-LTS-SP1:否
openEuler-24.03-LTS-SP3:否
openEuler-24.03-LTS-SP4:否

@tong_1001 经过defect-manager解析，已分析的内容如下表所示:

请确认分析内容的准确性，确认无误后，您可以进行后续步骤，否则您可以继续分析

/close

@tong_1001
关闭issue前,需要将受影响的分支在合并pr时关联上当前issue编号: #9999
受影响分支: openEuler-24.03-LTS-SP4
具体操作参考: https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue

影响性分析说明：sentry驱动urma建链失败，reboot/panic事件消息无法通过urma通道广播。

缺陷严重等级:(Critical/High/Moderate/Low)
Low
缺陷根因说明:
udma在创建jetty时新增校验tp_type类型(详见：https://atomgit.com/openeuler/kernel/pull/24177)，校验失败则无法创建jetty，对于sentry驱动来说就是urma建链失败，sentry驱动需要适配该变更。

受影响版本排查(受影响/不受影响):
openEuler-20.03-LTS-SP4:不受影响
openEuler-22.03-LTS-SP4:不受影响
openEuler-24.03-LTS-SP1:不受影响
openEuler-24.03-LTS-SP3:受影响
openEuler-24.03-LTS-SP4:受影响

修复是否涉及abi变化(是/否):
openEuler-20.03-LTS-SP4:否
openEuler-22.03-LTS-SP4:否
openEuler-24.03-LTS-SP1:否
openEuler-24.03-LTS-SP3:否
openEuler-24.03-LTS-SP4:否

@tong_1001 经过defect-manager解析，已分析的内容如下表所示:

请确认分析内容的准确性，确认无误后，您可以进行后续步骤，否则您可以继续分析

问题已解决，PR中已关联issue，issue无法关闭

@tong_1001
关闭issue前,需要将受影响的分支在合并pr时关联上当前issue编号: #9999
受影响分支: openEuler-24.03-LTS-SP4
具体操作参考: https://docs.atomgit.com/docs/help/home/org_project/pullrequests/pr-related-issue