| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
dt-bindings: display: Add SPI peripheral schema to SPI based displays With 'unevaluatedProperties' support enabled, several SPI based display binding examples have warnings: Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected) Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected) Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected) Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Fix all of these by adding a reference to spi-peripheral-props.yaml. With this, the description that the binding must follow spi-controller.yaml is both a bit out of date and redundant, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org | 4 年前 | |
dt-bindings: display: Fix lvds.yaml references The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing jsonschema package allows it, but coming changes make allowed "$ref" URIs stricter. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: advantech,idk-2121wr: reference common panel Reference common panel bindings to bring descriptions of common fields like panel-timing. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230823081107.82967-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: display: Add Arm virtual platforms display 'arm,rtsm-display' is a panel for Arm, Ltd. virtual platforms (e.g. FVP). The binding has been in use for a long time, but was never documented. Some users and an example have a 'panel-dpi' compatible, but that's not needed without a 'panel-timing' node which none of the users have since commit 928faf5e3e8d ("arm64: dts: fvp: Remove panel timings"). The example does have a 'panel-timing' node, but it should not for the same reasons the node was removed in the dts files. So update the example in arm,pl11x.yaml to match the schema. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220613145709.3729053-1-robh@kernel.org | 4 年前 | |
dt-bindings: display: arm,versatile-tft-panel: Drop erroneous properties in example The 'arm,versatile-sysreg' node in the example should not have '#address-cells' and '#size-cells' properties as the child node doesn't have 'reg'. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220810160341.51995-2-robh@kernel.org | 3 年前 | |
dt-bindings: display: Convert armadeus,st0700-adapt panel to DT schema Convert the armadeus,st0700-adapt panel binding to DT schema. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-4-robh@kernel.org | 6 年前 | |
dt-bindings: Whitespace clean-ups in schema files Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org> | 5 年前 | |
dt-bindings: display/panel: Add AUO A030JTN01 Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit interface. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230121162419.284523-2-cbranchereau@gmail.com | 3 年前 | |
dt-bindings: display: Convert bananapi,s070wv20-ct16 panel to DT schema Convert the bananapi,s070wv20-ct16 panel binding to DT schema. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-5-robh@kernel.org | 6 年前 | |
dt-bindings: display: Document BOE BF060Y8M-AJ0 panel compatible Document the boe,bf060y8m-aj0 panel. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210901173115.998628-2-angelogioacchino.delregno@somainline.org | 4 年前 | |
dt-bindings: display: convert boe,himax8279d to DT Schema v2: - Fix entry in MAINTAINERS v3: - Fix panel@0 in example (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-7-sam@ravnborg.org | 6 年前 | |
dt-bindings: display: panel: Add compatible for Starry ili9882t The STARRY ili9882t is a 10.51" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230525093151.2338370-4-yangcong5@huaqin.corp-partner.google.com | 3 年前 | |
dt-bindings: display: convert display-timings to DT schema Add display-timings.yaml - that references panel-timings.yaml. display-timings.yaml will be used for display bindings when they are converted to meta-schema format. For now the old display-timing.txt points to the new display-timings.yaml - and all users are left as-is. v2: - Updated native-mode description v3: - Simpler "^timing" pattern (Rob) - timing node is of type object (Rob) - added display-timings to panel-common.yaml - added yaml document terminator "..." Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Cc: devicetree@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20200216181513.28109-3-sam@ravnborg.org | 6 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: Convert dlc,dlc0700yzg-1 panel to DT schema Convert the dlc,dlc0700yzg-1 panel binding to DT schema. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-6-robh@kernel.org | 6 年前 | |
dt-bindings: display: Add bindings for EBBG FT8719 Add bindings for the EBBG FT8719 6.18" 2246x1080 DSI video mode panel, which can be found on some Xiaomi Poco F1 phones. The backlight is managed through the QCOM WLED driver. Signed-off-by: Joel Selvaraj <jo@jsfamily.in> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/BY5PR02MB7009E821B0D4AC20E11F8F13D9DF9@BY5PR02MB7009.namprd02.prod.outlook.com | 4 年前 | |
dt-bindings: display: elida,kd35t133: document port and rotation Panels are supposed to have one port (defined in panel-common.yaml binding) and can have also rotation: rk3326-odroid-go2.dtb: panel@0: 'port', 'rotation' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20230326204224.80181-3-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: Whitespace clean-ups in schema files Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org> | 5 年前 | |
dt-bindings: display: feiyang,fy07024di26a30d: document port Panels are supposed to have one port (defined in panel-common.yaml binding): rk3399-rockpro64.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326204224.80181-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display/panel: Add the Focaltech gpt3 Add bindings for the Forcaltech gpt3, which is a 640x480 3.0" 4:3 IPS LCD Panel found in the YLM/Anbernic RG300X handheld. Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221219195233.375637-3-cbranchereau@gmail.com | 3 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: drop redundant part of title (end) The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # IIO Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: Add SPI peripheral schema to SPI based displays With 'unevaluatedProperties' support enabled, several SPI based display binding examples have warnings: Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected) Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected) Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected) Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Fix all of these by adding a reference to spi-peripheral-props.yaml. With this, the description that the binding must follow spi-controller.yaml is both a bit out of date and redundant, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org | 4 年前 | |
dt-bindings: display: panel: use spi-peripheral-props.yaml For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Change "additionalProperties" to "unevaluatedProperties", so the actual other properties from "spi-peripheral-props.yaml" can be used. This has additional impact of allowing also other properties from panel-common.yaml to be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221004120907.72767-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: ili9881c: Add TDO TL050HDV35 LCD panel Add support for TDO TL050HDV35-H1311A LCD panel. Signed-off-by: Matus Gajdos <matuszpd@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230719102616.2259-2-matuszpd@gmail.com | 2 年前 | |
dt-bindings: display: Fix lvds.yaml references The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing jsonschema package allows it, but coming changes make allowed "$ref" URIs stricter. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: Add SPI peripheral schema to SPI based displays With 'unevaluatedProperties' support enabled, several SPI based display binding examples have warnings: Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected) Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected) Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected) Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Fix all of these by adding a reference to spi-peripheral-props.yaml. With this, the description that the binding must follow spi-controller.yaml is both a bit out of date and redundant, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org | 4 年前 | |
dt-bindings: display: convert innolux,p097pfg to DT Schema Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Lin Huang <hl@rock-chips.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-11-sam@ravnborg.org | 6 年前 | |
dt-bindings: display: panel: jadard,jd9365da-h3: Add Radxa Display 8HD Radxa Display 8HD is a family of DSI panels from Radxa that uses jd9365da-h3 IC. Add compatible string for it. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230123183312.436573-3-jagan@edgeble.ai | 3 年前 | |
dt-bindings: display: enable port jdi,lt070me05000 Enable port inside panel bindings. Fixes warnings generated by make qcom-apq8064-asus-nexus7-flo.dtb as: arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211224195354.78362-1-david@ixit.cz | 4 年前 | |
spi/panel: dt-bindings: drop 3-wire from common properties The spi-3wire property is device specific and should be accepted only if device really needs them. Drop it from common spi-peripheral-props.yaml schema, mention in few panel drivers which use it and include instead in the SPI controller bindings. The controller bindings will provide spi-3wire type validation and one place for description. Each device schema must list the property if it is applicable. The Samsung S6E63M0 panel uses also spi-cpha/cpol properties on at least one board (ste-ux500-samsung-janice/dts), so add also these to the panel's bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220810131311.428645-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
spi/panel: dt-bindings: drop 3-wire from common properties The spi-3wire property is device specific and should be accepted only if device really needs them. Drop it from common spi-peripheral-props.yaml schema, mention in few panel drivers which use it and include instead in the SPI controller bindings. The controller bindings will provide spi-3wire type validation and one place for description. Each device schema must list the property if it is applicable. The Samsung S6E63M0 panel uses also spi-cpha/cpol properties on at least one board (ste-ux500-samsung-janice/dts), so add also these to the panel's bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220810131311.428645-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: ltk050h3146w: replace Heiko Stuebner by myself as maintainer Heiko does not work at Theobroma Systems anymore and the boards using those panels are downstream, maintained internally by the company, so let's relieve Heiko of maintainership duties. Cc: Heiko Stuebner <heiko@sntech.de> Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220131165439.717713-1-quentin.schulz@theobroma-systems.com | 4 年前 | |
dt-bindings: Whitespace clean-ups in schema files Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org> | 5 年前 | |
dt-bindings: display: use spi-peripheral-props.yaml Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. The sitronix,st7735r references also panel-common.yaml and lists explicitly allowed properties, thus here reference only spi-peripheral-props.yaml for purpose of documenting the SPI slave device and bringing spi-max-frequency type validation. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220727164312.385836-1-krzysztof.kozlowski@linaro.org | 3 年前 | |
spi/panel: dt-bindings: drop CPHA and CPOL from common properties The spi-cpha and spi-cpol properties are device specific and should be accepted only if device really needs them. Drop them from common spi-peripheral-props.yaml schema, mention in few panel drivers which use them and include instead in the SPI controller bindings. The controller bindings will provide CPHA/CPOL type validation and one place for description. Each device schema must list the properties if they are applicable. Suggested-by: Jonathan Cameron <jic23@kernel.org> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220722191539.90641-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: Add Logic PD Type 28 display panel This patch adds documentation of device tree bindings for the WVGA panel Logic PD Type 28 display. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191016135147.7743-2-aford173@gmail.com | 6 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: display: Fix lvds.yaml references The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing jsonschema package allows it, but coming changes make allowed "$ref" URIs stricter. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: Fix lvds.yaml references The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing jsonschema package allows it, but coming changes make allowed "$ref" URIs stricter. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: Fix SPI and I2C bus node names in examples SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: panel: Add NewVision NV3051D bindings Add documentation for the NewVision NV3051D panel bindings. Note that for the two expected consumers of this panel binding the underlying LCD model is unknown. Name "anbernic,rg353p-panel" is used because the hardware itself is known as "anbernic,rg353p". Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221111203130.9615-3-macroalpha82@gmail.com | 3 年前 | |
dt-bindings: Whitespace clean-ups in schema files Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: linux-clk@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-spi@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-remoteproc@vger.kernel.org Cc: linux-hwmon@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-rtc@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Rob Herring <robh@kernel.org> | 5 年前 | |
dt-bindings: display: Add bindings for Novatek NT35950 The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, with Static RAM for content retention in command mode and also supports video mode with VESA Frame Buffer Compression or Display Stream Compression on single, or dual dsi port(s). This DDIC is also capable of upscaling an input image to the panel's native resolution, for example it can upscale a 1920x1080 input to 3840x2160 with either bilinear interpolation or pixel duplication. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210901173127.998901-2-angelogioacchino.delregno@somainline.org | 4 年前 | |
dt-bindings: display: panel: nt36523: Add Lenovo J606F panel Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3 video mode display. Document it and allow rotation while at it (Lenovo mounted it upside down!). Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-1-bcf9ba4de46f@linaro.org | 3 年前 | |
dt-bindings: display: novatek,nt36672a: correct VDDIO supply The nt36672a bindings were added with a mistake on VDDIO supply calling it in one place vddio and in other vddi0. Typical name is rather vddio which is also now used by DTS (sdm845-xiaomi-beryllium-common.dtsi) and Linux driver. Fixes: c2abcf30efb8 ("dt-bindings: display: novatek,nt36672a: Fix unevaluated properties warning") Fixes: 9528a02430df ("dt-bindings: display: panel: Add bindings for Novatek nt36672a") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-2-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: Fix typos Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: Fix typos Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: Clean-up undocumented compatible strings Adding checks for undocumented compatible strings reveals a bunch of warnings in the DT binding examples. Fix the cases which are typos, just a mismatch between the schema and the example, or aren't documented at all. In a couple of cases, fixing the compatible revealed some schema errors which are fixed. There's a bunch of others remaining after this which have bindings, but those aren't converted to schema yet. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux-clk@vger.kernel.org Cc: dmaengine@vger.kernel.org Cc: linux-i3c@lists.infradead.org Cc: linux-iio@vger.kernel.org Cc: linux-leds@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-serial@vger.kernel.org Cc: linux-spi@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Alain Volmat <alain.volmat@foss.st.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20210316194918.3528417-1-robh@kernel.org | 5 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: drm/panel-simple-edp: Introduce generic eDP panels eDP panels generally contain almost everything needed to control them in their EDID. This comes from their DP heritage were a computer needs to be able to properly control pretty much any DP display that's plugged into it. The one big issue with eDP panels and the reason that we need a panel driver for them is that the power sequencing can be different per panel. While it is true that eDP panel sequencing can be arbitrarily complex, in practice it turns out that many eDP panels are compatible with just some slightly different delays. See the contents of the bindings file introduced in this patch for some details. The fact that eDP panels are 99% probable and that the power sequencing (especially power up) can be compatible between many panels means that there's a constant desire to plug multiple different panels into the same board. This could be for second sourcing purposes or to support multiple SKUs (maybe a 11" and a 13", for instance). As discussed [1], it should be OK to support this by adding two properties to the device tree to specify the delays needed for powering up the panel the first time. We'll create a new "edp-panel" bindings file and define the two delays that might need to be specified. NOTE: in the vast majority of the cases (HPD is hooked up and isn't glitchy or is debounced) even these delays aren't needed. [1] https://lore.kernel.org/r/CAD=FV=VZYOMPwQZzWdhJGh5cjJWw_EcM-wQVEivZ-bdGXjPrEQ@mail.gmail.com Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210914132020.v5.1.I1116e79d34035338a45c1fc7cdd14a097909c8e0@changeid | 4 年前 | |
dt-bindings: display: panel: Document Hydis HV070WX2-1E0 The Hydis HV070WX2-1E0 is a 7" WXGA (800x1280) TFT LCD LVDS panel that is one of the variants used on Google Nexus 7. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726185010.2294709-2-thierry.reding@gmail.com | 2 年前 | |
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B The Saef SF-TC154B is a 1.54 inch 240x240 square panel with a MIPI DBI compatible interface. The panel is used on the Anbernic RG-Nano handheld gaming device. The initialization of the panel requires a firmware binary which can be made with the mipi-dbi-cmd[1] tool. The command sequence needed can be found in both source[2] and binary form[3]. [1]: https://github.com/notro/panel-mipi-dbi [2]: https://github.com/macromorgan/panel-mipi-dbi-firmware/raw/main/saef%2Csftc154b.txt [3]: https://github.com/macromorgan/panel-mipi-dbi-firmware/raw/main/saef%2Csftc154b.bin Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20230828181941.1609894-3-macroalpha82@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: display: simple: Add Innolux G156HCE-L01 panel Add entry for Innolux G156HCE-L01 15.6" 1920x1080 24bpp dual-link LVDS TFT panel. Documentation is available at [1]. [1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-1-marex@denx.de | 2 年前 | |
dt-bindings: display: Start the info graphics with HS/VS change The VS signal change is synchronized to HS signal change, start the info graphics with that event, instead of having that event occur in the middle of it. Scope trace of DPI bus with HS/VS active HIGH looks as follows: ________________...__ VS...___/__ __ \______... HS...___/ \_______/ \__...__/ \___... ^ ^ | | | Used to start here -' | '--- Start info graphics here Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230221200407.16531-1-marex@denx.de | 3 年前 | |
dt-bindings: display: Convert pda,91-00156-a0 panel to DT schema Convert the pda,91-00156-a0 panel binding to DT schema. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-7-robh@kernel.org | 6 年前 | |
dt-bindings: display: Convert raspberrypi,7inch-touchscreen panel to DT schema Convert the raspberrypi,7inch-touchscreen panel binding to DT schema. Cc: Eric Anholt <eric@anholt.net> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-8-robh@kernel.org | 6 年前 | |
dt-bindings: panel: raydium,rm67191: Add missing type to 'video-mode' 'video-mode' is missing a type definition and is not a common property. The type is 'uint32'. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220719215201.1877997-1-robh@kernel.org | 3 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: display: Drop unneeded quotes Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm Link: https://lore.kernel.org/r/20230320233823.2919475-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: samsung,amoled-mipi-dsi: Do not require enable-gpios on samsung,s6e63j0x03 The samsung,s6e63j0x03 does not have enable GPIO, so do not require it. This fixes dtbs_check warning: arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200829172532.29358-1-krzk@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 5 年前 | |
dt-bindings: display: panel: Add Samsung AMS495QA01 Add documentation for Samsung AMS495QA01 panel (with Magnachip D53E6EA8966 controller IC). Co-developed-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com> Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230123154603.1315112-3-macroalpha82@gmail.com | 3 年前 | |
spi/panel: dt-bindings: drop CPHA and CPOL from common properties The spi-cpha and spi-cpol properties are device specific and should be accepted only if device really needs them. Drop them from common spi-peripheral-props.yaml schema, mention in few panel drivers which use them and include instead in the SPI controller bindings. The controller bindings will provide CPHA/CPOL type validation and one place for description. Each device schema must list the properties if they are applicable. Suggested-by: Jonathan Cameron <jic23@kernel.org> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220722191539.90641-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: display: panel: use spi-peripheral-props.yaml For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Change "additionalProperties" to "unevaluatedProperties", so the actual other properties from "spi-peripheral-props.yaml" can be used. This has additional impact of allowing also other properties from panel-common.yaml to be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221004120907.72767-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: panel: use spi-peripheral-props.yaml For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Change "additionalProperties" to "unevaluatedProperties", so the actual other properties from "spi-peripheral-props.yaml" can be used. This has additional impact of allowing also other properties from panel-common.yaml to be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221004120907.72767-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: convert samsung,s6d16d0 to DT Schema Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-22-sam@ravnborg.org | 6 年前 | |
dt-bindings: display: panel: use spi-peripheral-props.yaml For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Change "additionalProperties" to "unevaluatedProperties", so the actual other properties from "spi-peripheral-props.yaml" can be used. This has additional impact of allowing also other properties from panel-common.yaml to be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221004120907.72767-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: panel: Add Samsung S6D7AA0 LCD panel controller Add bindings for the S6D7AA0 LCD panel controller, including the S6D7AA0-LSL080AL02 panel used in the Samsung Galaxy Tab 3 8.0 family of tablets, and the S6D7AA0-LSL080AL03 and S6D7AA0-LTL101AT01 panels used in the Samsung Galaxy Tab A 8.0 and 9.7 2015. Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230519170354.29610-2-aweber.kernel@gmail.com | 3 年前 | |
spi/panel: dt-bindings: drop 3-wire from common properties The spi-3wire property is device specific and should be accepted only if device really needs them. Drop it from common spi-peripheral-props.yaml schema, mention in few panel drivers which use it and include instead in the SPI controller bindings. The controller bindings will provide spi-3wire type validation and one place for description. Each device schema must list the property if it is applicable. The Samsung S6E63M0 panel uses also spi-cpha/cpol properties on at least one board (ste-ux500-samsung-janice/dts), so add also these to the panel's bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220810131311.428645-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: display: panel-simple-dsi: document port Panels are supposed to have one port (coming from panel-common.yaml binding): msm8916-samsung-a3u-eur.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326155425.91181-4-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: cleanup DTS example whitespaces The DTS code coding style expects spaces around '=' sign. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Mike Leach <mike.leach@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: seiko,43wvf1g: Change the maintainer's contact Marco's NXP email is no longer valid. Marco told me offline that he has no interest to be listed as the maintainer contact for this binding, so add my contact. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230329201150.741106-1-festevam@gmail.com | 3 年前 | |
dt-bindings: display: Fix lvds.yaml references The trailing "/" in "lvds.yaml/#" is not a valid JSON pointer. The existing jsonschema package allows it, but coming changes make allowed "$ref" URIs stricter. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20230418150658.1535120-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: Convert sharp, ld-d5116z01b panel to DT schema Convert the sharp,ld-d5116z01b panel binding to DT schema. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> | 6 年前 | |
dt-bindings: display: simplify compatibles syntax Lists (items) with one item should be just const or enum because it is shorter and simpler. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230414104230.23165-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: convert sharp,lq150x1lg11 to DT Schema Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-33-sam@ravnborg.org | 6 年前 | |
dt-bindings: display: convert sharp,ls037v7dw01 to DT Schema v2: - Add min/maxItems to mode-gpios (Rob) - Fix bug in description, mode is up to three gpios (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Rob Herring <robh@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-32-sam@ravnborg.org | 6 年前 | |
dt-bindings: display: convert sharp,ls043t1le01 to DT Schema The txt binding specified the property "power-supply". But the example and the actual implementation in the linux-kernel uses "avdd-supply". So the binding is adjusted to use avdd-supply as this seems to be the correct choice. There are no DT files in the linux kernel to check. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-30-sam@ravnborg.org | 6 年前 | |
dt-bindings: add bindings for the Sharp LS060T1SX01 panel Add devicetree bindings for the Sharp LS060T1SX01 6.0" FullHD panel using NT35695 driver. This panel can be found i.e. in the Dragonboard Display Adapter bundle. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211009203806.56821-2-dmitry.baryshkov@linaro.org | 4 年前 | |
dt-bindings: display: sitronix,st7701: document port and rotation Panels are supposed to have one port (defined in panel-common.yaml binding) and can have also rotation: rk3326-odroid-go3.dtb: panel@0: 'port', 'rotation' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20230326204224.80181-4-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: st7789v: add jasonic jt240mhqs-hwt-ek-e3 display Add compatible for the Jasonic Technology Ltd. JT240MHQS-HWT-EK-E3 display. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230718-feature-lcd-panel-v2-2-2485ca07b49d@wolfvision.net | 2 年前 | |
drm/panel: Extend ACX424AKP bindings to ACX424AKM The panel ACX424AKP seems to only be used in prototypes, whereas real products use the 10 pixels shorter ACX424AKM. Extend the ACX424AKP bindings to also cover the ACX424AKM. The ACX424AKM was used in a few different mobile phones from Sony Mobile. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220103093501.637323-1-linus.walleij@linaro.org | 4 年前 | |
dt-bindings: display: Add SPI peripheral schema to SPI based displays With 'unevaluatedProperties' support enabled, several SPI based display binding examples have warnings: Documentation/devicetree/bindings/display/panel/samsung,ld9040.example.dt.yaml: lcd@0: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/kingdisplay,kd035g6-54nt.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-3wire' were unexpected) Documentation/devicetree/bindings/display/panel/ilitek,ili9322.example.dt.yaml: display@0: Unevaluated properties are not allowed ('reg' was unexpected) Documentation/devicetree/bindings/display/panel/samsung,s6e63m0.example.dt.yaml: display@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sony,acx565akm.example.dt.yaml: panel@2: Unevaluated properties are not allowed ('spi-max-frequency', 'reg' were unexpected) Documentation/devicetree/bindings/display/panel/tpo,td.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/lgphilips,lb035q02.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('reg', 'spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Documentation/devicetree/bindings/display/panel/innolux,ej030na.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) Documentation/devicetree/bindings/display/panel/sitronix,st7789v.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('spi-max-frequency', 'spi-cpol', 'spi-cpha' were unexpected) Fix all of these by adding a reference to spi-peripheral-props.yaml. With this, the description that the binding must follow spi-controller.yaml is both a bit out of date and redundant, so remove it. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20211221125209.1195932-1-robh@kernel.org | 4 年前 | |
dt-bindings: display/panel: Add Sony Tama TD4353 JDI display panel Add bindings for the display panel used on some Sony Xperia XZ2 and XZ2 Compact smartphones. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230119163201.580858-1-konrad.dybcio@linaro.org | 3 年前 | |
dt-bindings: display: Add Sony Tulip Truly NT35521 panel support The Sony Tulip Truly NT35521 is a 5.24" 1280x720 DSI panel, which can be found on Sony Xperia M4 Aqua phone. The backlight is managed through DSI link. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210809051008.6172-2-shawn.guo@linaro.org | 4 年前 | |
dt-bindings: display: panel: add startek kd070fhfid015 support The Startek KD070FHFID015 is a 7-inch TFT LCD display with a resolution of 1024 x 600 pixels. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230711-startek_display-v4-1-fb1d53bfdef6@baylibre.com | 2 年前 | |
dt-bindings: display: convert startek,startek-kd050c to DT Schema Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Marek Belisko <marek@goldelico.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408195109.32692-26-sam@ravnborg.org | 6 年前 | |
dt-bindings: display: Convert tfc,s9700rtwv43tr-01b panel to DT schema Convert the tfc,s9700rtwv43tr-01b panel binding to DT schema. Cc: Heiko Stuebner <heiko.stuebner@bq.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190705164221.4462-9-robh@kernel.org | 6 年前 | |
drm/panel: simple: Add TI nspire panel bindings Add bindings for the TI NSPIRE simple display panels. Cc: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190806135437.7451-1-linus.walleij@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> | 6 年前 | |
spi/panel: dt-bindings: drop CPHA and CPOL from common properties The spi-cpha and spi-cpol properties are device specific and should be accepted only if device really needs them. Drop them from common spi-peripheral-props.yaml schema, mention in few panel drivers which use them and include instead in the SPI controller bindings. The controller bindings will provide CPHA/CPOL type validation and one place for description. Each device schema must list the properties if they are applicable. Suggested-by: Jonathan Cameron <jic23@kernel.org> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220722191539.90641-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: display: panel: use spi-peripheral-props.yaml For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Change "additionalProperties" to "unevaluatedProperties", so the actual other properties from "spi-peripheral-props.yaml" can be used. This has additional impact of allowing also other properties from panel-common.yaml to be used. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221004120907.72767-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: display: panel: Add Visionox R66451 AMOLED DSI panel Document the 1080x2340 Visionox R66451 AMOLED DSI panel bindings Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230516-b4-r66451-panel-driver-v2-1-9c8d5eeef579@quicinc.com | 3 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: use capital "OR" for multiple licenses in SPDX Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Correct also the format // -> .* in few Allwinner binding headers as pointed out by checkpatch: WARNING: Improper SPDX comment style for 'include/dt-bindings/reset/sun50i-h6-ccu.h', please use '/*' instead Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20230823084540.112602-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: display: xinpeng,xpp055c272: document port Panels are supposed to have one port (defined in panel-common.yaml binding): px30-evb.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230326204224.80181-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 4 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 5 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 |