| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
mfd: 88pm860x: Device tree support Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 13 年前 | |
dt-bindings: mfd: Correct interrupt flags in examples GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted same logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> # for BD70528 Acked-by: Tim Harvey <tharvey@gateworks.com> # for gateworks-gsc.yaml Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
dt-bindings: Fix SPI and I2C bus node names in examples SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540 Add ADI MAX77541/MAX77540 devicetree document. Signed-off-by: Okan Sahin <okan.sahin@analog.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230412111256.40013-5-okan.sahin@analog.com Signed-off-by: Lee Jones <lee@kernel.org> | 3 年前 | |
dt-bindings: Remove 'Device Tree Bindings' from end of title: As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: mfd: allwinner: prcm: Simplify conditional schemas There's no need for 'additionalProperties' in the if/then schema as there's already 'unevaluatedProperties' in the parent schema. With 'additionalProperties' dropped, 'compatible' and 'phandle' don't need to be listed in the conditional schemas as 'compatible' is already in the main section and 'phandle' will be implicitly added. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230726033554.174365-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: allwinner: prcm: Simplify conditional schemas There's no need for 'additionalProperties' in the if/then schema as there's already 'unevaluatedProperties' in the parent schema. With 'additionalProperties' dropped, 'compatible' and 'phandle' don't need to be listed in the conditional schemas as 'compatible' is already in the main section and 'phandle' will be implicitly added. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230726033554.174365-1-robh@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: mfd: Add bindings for Ampere Altra SMPro MFD driver Adds device tree bindings for SMPro MFD driver found on the Mt.Jade hardware reference platform with Ampere's Altra Processor family. The SMpro co-processor on Ampere Altra processor family is to monitor and report various data included hwmon-related info, RAS errors, and other miscellaneous information. Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221031024442.2490881-2-quan@os.amperecomputing.com | 3 年前 | |
mfd: as3711: Add OF support Add Flat Device Tree support to the AS3711 MFD driver. This patch just allows to bind the driver to I2C devices, instantiated from the DT. DT support for AS3711 cell drivers will be added in separate drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 13 年前 | |
mfd: as3722: Disable auto-power-on when AC OK On ams AS3722, power on when AC OK is enabled by default. Making this option as disable by default and enable only when platform need this explicitly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Bibek Basu <bbasu@nvidia.com> Tested-by: Bibek Basu <bbasu@nvidia.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 7 年前 | |
dt-bindings: mfd: aspeed,ast2x00-scu: Convert to DT schema format Convert the aspeed,ast2[456]00-scu binding to DT schema format. The original binding was missing '#address-cells', '#size-cells', 'ranges', and child nodes, so add them. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220810161635.73936-3-robh@kernel.org | 3 年前 | |
mfd: dt: Add bindings for the Aspeed SoC Display Controller (GFX) The Aspeed SoC Display Controller is presented as a syscon device to arbitrate access by display and pinmux drivers. Video pinmux configuration on fifth generation SoCs depends on bits in both the System Control Unit and the Display Controller. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 9 年前 | |
dt-bindings: Fix typos Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: mfd: at91: Add SAM9X7 compatible string Document sam9x7 DT for flexcom. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230728102515.265971-1-varshini.rajendran@microchip.com Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: atmel-gpbr: Add microchip,sam9x7-gpbr Add microchip,sam9x7-gpbr to DT bindings documentation. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230728102529.266030-1-varshini.rajendran@microchip.com Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: Add bindings for SAM9X75 LCD controller Add new compatible string for the XLCD controller on sam9x75 variant of the SAM9X7 SoC family. The XLCD controller in sam9x75 variant supports interfacing with LVDS and MIPI-DSI and parallel port RGB. Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230712024017.218921-2-manikandan.m@microchip.com Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: atmel-matrix: Add microchip,sam9x7-matrix Add microchip,sam9x7-matrix to DT bindings documentation. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230728102539.266085-1-varshini.rajendran@microchip.com Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: atmel-smc: Add microchip,sam9x7-smc Add microchip,sam9x7-smc to DT bindings documentation. Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230728102550.266134-1-varshini.rajendran@microchip.com Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: brcm: rationalize Broadcom documentation naming This patchset attempts to standardize the naming of dt-bindings documents based on the Broadcom vendor prefix of brcm. Although there are no guidelines currently present for how to name the dt-bindings document the "vendor,binding.txt" style is in use by some of the other vendors. Acked-by: Lee Jones <lee@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Rob Herring <robh@kernel.org> | 11 年前 | |
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Also absolute path starting with /schemas is preferred. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Also absolute path starting with /schemas is preferred. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Also absolute path starting with /schemas is preferred. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Also absolute path starting with /schemas is preferred. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Also absolute path starting with /schemas is preferred. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: brcm: Drop unneeded quotes and use absolute /schemas path Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Also absolute path starting with /schemas is preferred. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230713065040.7968-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: Fix pinctrl node name warnings The recent addition pinctrl.yaml in commit c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml") resulted in some node name warnings: Documentation/devicetree/bindings/mfd/cirrus,lochnagar.example.dt.yaml: \ lochnagar-pinctrl: $nodename:0: 'lochnagar-pinctrl' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/mfd/cirrus,madera.example.dt.yaml: \ codec@1a: $nodename:0: 'codec@1a' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/mfd/brcm,cru.example.dt.yaml: \ pin-controller@1c0: $nodename:0: 'pin-controller@1c0' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$' Fix the node names to the preferred 'pinctrl'. For cirrus,madera, nothing from pinctrl.yaml schema is used, so just drop the reference. Fixes: c09acbc499e8 ("dt-bindings: pinctrl: use pinctrl.yaml") Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220303232350.2591143-1-robh@kernel.org | 4 年前 | |
syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU Add binding document for Broadcom iProc's Chip Device Resource Unit (CDRU). Multiple iProc based chips have this CDRU block that contains miscellaneous registers for chip or device configurations. Start with Stingray specific compatible string for the initial binding Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 8 年前 | |
syscon: dt-bindings: Add binding document for iProc MHB block Add binding document for Broadcom iProc's Multi-Host Bridge (MHB) block Signed-off-by: Ray Jui <ray.jui@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 8 年前 | |
dt-bindings: mfd: Add Broadcom's MISC block Broadcom's MISC is an MFD hardware block used on some of their SoCs like bcm63xx and bcm4908. At this point only PCIe reset is fully understood and documented. More functions may be added later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 4 年前 | |
dt-bindings: timer: Add Broadcom's BCMBCA timers BCA is a big set / family of Broadcom devices sharing multiple hardware blocks. One of them is timer that actually exists in two versions. It's a part of TWD MFD block. Add binding for it so SoCs can be properly described. Linux (and probably any other OS) doesn't really seem to need a driver for it. it may be needed for bootloaders (e.g. U-Boot) though. Especially for SoCs with CPUs other than Cortex-A9 (which contains arch timers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221028115353.13881-1-zajec5@gmail.com | 3 年前 | |
dt-bindings: Change Damien Le Moal's contact email Change my email address to dlemoal@kernel.org. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230514222614.115299-1-dlemoal@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have some late breaking reports that a patch series to rework clk rate range support broke boot on some devices, so I've left that branch out of this. Hopefully we can get to that next week, or punt on it and let it bake another cycle. That means we don't really have any changes to the core framework this time around besides a few typo fixes. Instead this is all clk driver updates and fixes. The usual suspects are here (again), with Qualcomm dominating the diffstat. We look to have gained support for quite a few new Qualcomm SoCs and Dmitry worked on updating many of the existing Qualcomm drivers to use clk_parent_data. After that we have MediaTek drivers getting some much needed updates, in particular to support GPU DVFS. There are also quite a few Samsung clk driver patches, but that's mostly because there was a maintainer change and so last release we missed some of those patches. Overall things look normal, but I'm slowly reviewing core framework code nowadays and that shows given the rate range patches had to be yanked last minute. Let's hope this situation changes soon. New Drivers: - Support for Renesas VersaClock7 clock generator family - Add Spreadtrum UMS512 SoC clk support - New clock drivers for MediaTek Helio X10 MT6795 - Display clks for Qualcomm SM6115, SM8450 - GPU clks for Qualcomm SC8280XP - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers Deleted Drivers: - Remove DaVinci DM644x and DM646x clk driver support Updates: - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - More devm helpers for fixed rate registration - Various PXA168 clk driver fixes - Add resets for MediaTek MT8195 PCIe and USB - Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging - Add missing DPI1_HDMI clock in MT8195 VDOSYS1 - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195 - Fix GPU clock topology on MT8195 - Propogate rate changes from GPU clock gate up the tree - Clock mux notifiers for GPU-related PLLs - Conversion of more "simple" drivers to mtk_clk_simple_probe() - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers - Fixes to previous |struct clk| to |struct clk_hw| conversion on MediaTek - Shrink MT8192 clock driver by deduplicating clock parent lists - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk' clocks for i.MX8MP - Drop unnecessary newline in i.MX8MM dt-bindings - Add more MU1 and SAI clocks dt-bindings Ids - Introduce slice busy bit check for i.MX93 composite clock - Introduce white list bit check for i.MX93 composite clock - Add new i.MX93 clock gate - Add MU1 and MU2 clocks to i.MX93 clock provider - Add SAI IPG clocks to i.MX93 clock provider - add generic clocks for U(S)ART available on SAMA5D2 SoCs - reset controller support for Polarfire clocks - .round_rate and .set rate support for clk-mpfs - code cleanup for clk-mpfs - PLL support for PolarFire SoC's Clock Conditioning Circuitry - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car V4H - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8 - Add I2C clocks and resets on RZ/V2M - Document clock support for the RZ/Five SoC - mux-variant clock using the table variant to select parents - clock controller for the rv1126 soc - conversion of rk3128 to yaml and relicensing of the yaml bindings to gpl2+MIT (following dt-binding guildelines) - Exynos7885: add FSYS, TREX and MFC clock controllers - Exynos850: add IS and AUD (audio) clock controllers with bindings - ExynosAutov9: add FSYS clock controllers with bindings - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock controllers, due to duplicated entries. This is an acceptable ABI break: recently developed/added platform so without legacies, acked by known users/developers - ExynosAutov9: add few missing Peric 0/1 gates - ExynosAutov9: correct register offsets of few Peric 0/1 clocks - Minor code improvements (use of_device_get_match_data() helper, code style) - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as he already maintainers that architecture/platform - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving retention issues during suspend of USB on Qualcomm sc7180/sc7280 and SC8280XP - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration - Qualcomm SDM660 SDCC1 moved to floor clk ops - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018 was added/fixed - The Qualcomm MSM8996 CPU clocks are updated with support for ACD - Support for Qualcomm SDM670 GCC and RPMh clks was added - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for num_parents was done for many Qualcomm SoCs - Support for per-reset defined delay on Qualcomm was introduced" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: ast2600: BCLK comes from EPLL clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: nxp: fix typo in comment clk: pxa: add a check for the return value of kzalloc() clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: imx: scu: fix memleak on platform_device_add() fails clk: vc5: Use regmap_{set,clear}_bits() where appropriate ... | 3 年前 | |
dt-bindings: mfd: cirrus,madera: Fix 'interrupts' in example The 'interrupts' properties takes an irq number, not a phandle, and 'interrupt-parent' isn't needed in examples. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220119015611.2442819-1-robh@kernel.org | 4 年前 | |
Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: "There's a few orphans in the conversion to %pOF printf specifiers included here that no one else picked up. Summary: - Convert more DT code to use of_property_read_* API. - Improve DT overlay support when adding multiple overlays - Convert printk's to %pOF format specifiers. Most went via subsystem trees, but picked up the remaining orphans - Correct unittests to use preferred "okay" for "status" property value - Add a KASLR seed property - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa - Fix modalias buffer handling - Clean-up of include paths for building dtbs - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC - Add compatible string for Allwinner H5 Mali-450 GPU - Fix links to old OpenFirmware docs with new mirror on devicetree.org - Remove status property from binding doc examples" * tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) devicetree: Adjust status "ok" -> "okay" under drivers/of/ dt-bindings: Remove "status" from examples dt-bindings: pinctrl: sh-pfc: Use generic node name dt-bindings: Add vendor Mellanox dt-binding: net/phy: fix interrupts description virt: Convert to using %pOF instead of full_name macintosh: Convert to using %pOF instead of full_name ide: pmac: Convert to using %pOF instead of full_name microblaze: Convert to using %pOF instead of full_name dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/ of: Use PLATFORM_DEVID_NONE definition of/device: Fix of_device_get_modalias() buffer handling of/device: Prevent buffer overflow in of_device_modalias() dt-bindings: add amc6821, isl1208 trivial bindings dt-bindings: add vendor prefix for Theobroma Systems of: search scripts/dtc/include-prefixes path for both CPP and DTC of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP of: remove drivers/of/testcase-data from include search path for CPP of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered iio: srf08: add device tree binding for srf02 and srf10 ... | 8 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: mfd: da9062: Correct file name for watchdog Replace the watchdog file name with the name currently in use. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221130101426.5318-1-cniedermaier@dh-electronics.com | 3 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: mfd: Add Delta TN48M CPLD drivers bindings Add binding documents for the Delta TN48M CPLD drivers. Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20220131133049.77780-6-robert.marko@sartura.hr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 4 年前 | |
dt-bindings: mfd: dlg,da9063: document voltage monitoring Document that the da9063 only provides under- *and* over-voltage monitoring in one, and therefore requires both to be configured with the same severity and value. Add an example for clarification. Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20230403-da9063-disable-unused-v3-3-cc4dc698864c@skidata.com Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
Merge tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more devicetree updates from Rob Herring: "This is mostly a treewide clean-up from Krzysztof. There's also a couple of fixes and things that fell thru the cracks. I must say this has been a nice merge window without bindings dumped in at the last minute introducing warnings. Summary: - Treewide dropping of redundant 'binding' or 'schema' from schema titles. This will be followed up with a automated check to catch these. - Re-sort vendor-prefies - Convert GPIO based watchdog to schema - Handle all the variations for clocks, resets, power domains in i.MX PCIe binding - Document missing 'power-domains' property in mxsfb - Fix error with path references in Tegra XUSB example - Honor CONFIG_CMDLINE* even without /chosen node" * tag 'devicetree-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: drop redundant part of title (manual) dt-bindings: clock: drop redundant part of title dt-bindings: drop redundant part of title (beginning) dt-bindings: drop redundant part of title (end, part three) dt-bindings: drop redundant part of title (end, part two) dt-bindings: drop redundant part of title (end) dt-bindings: clock: st,stm32mp1-rcc: add proper title dt-bindings: memory-controllers: ti,gpmc-child: drop redundant part of title dt-bindings: drop redundant part of title of shared bindings dt-bindings: watchdog: gpio: Convert bindings to YAML dt-bindings: imx6q-pcie: Handle more resets on legacy platforms dt-bindings: imx6q-pcie: Handle various PD configurations dt-bindings: imx6q-pcie: Handle various clock configurations dt-bindings: hwmon: ntc-thermistor: drop Naveen Krishna Chatradhi from maintainers dt-bindings: mxsfb: Document i.MX8M/i.MX6SX/i.MX6SL power-domains property dt-bindings: vendor-prefixes: sort entries alphabetically dt-bindings: usb: tegra-xusb: Remove path references of: fdt: Honor CONFIG_CMDLINE* even without /chosen node | 3 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
mfd: Add DT binding documentation for imx25 ADC/TSC This documentation describes the devicetree bindings for the ADC/Touchscreen unit of the i.MX25 SoC. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 10 年前 | |
dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes Remove the unnecessary #address-cells and #size-cells nodes from the fan-controller. These are not needed as the fan controller does not have any children. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230612162444.3936302-1-tharvey@gateworks.com Signed-off-by: Lee Jones <lee@kernel.org> | 3 年前 | |
Merge tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Renesas RZ/G2L MTU3 New Device Support: - Add support for Lenovo Yoga Book X90F to Intel CHT WC - Add support for MAX5970 and MAX5978 to Simple MFD (I2C) - Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI - Add support for AXP15060 PMIC to X-Powers PMIC collection Remove Device Support: - Remove support for Samsung 5M8751 and S5M8763 PMIC devices New Functionality: - Convert deprecated QCOM IRQ Chip to config registers - Add support for 32-bit address spaces to Renesas SMUs Fix-ups: - Make use of APIs / MACROs designed to simplify and demystify - Add / improve Device Tree bindings - Memory saving struct layout optimisations - Remove old / deprecated functionality - Factor out unassigned register addresses from ranges - Trivial: Spelling fixes, renames and coding style fixes - Rid 'defined but not used' warnings - Remove ineffective casts and pointer stubs Bug Fixes: - Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms - Remove MODULE_*() helpers from non-tristate drivers - Do not attempt to use out-of-range memory addresses associated with io_base - Provide missing export helpers - Fix remap bulk read optimisation fallout - Fix memory leak issues in error paths" * tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits) dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant mfd: axp20x: Add support for AXP15060 PMIC dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write() dt-bindings: mfd: dlg,da9063: Document voltage monitoring dt-bindings: mfd: stm32: Remove unnecessary blank lines dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver counter: Add Renesas RZ/G2L MTU3a counter driver Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select mfd: Add Renesas RZ/G2L MTU3a core driver dt-bindings: timer: Document RZ/G2L MTU3a bindings mfd: rsmu_i2c: Convert to i2c's .probe_new() again mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs mfd: dln2: Fix memory leak in dln2_probe() mfd: axp20x: Fix axp288 writable-ranges ... | 3 年前 | |
dt-bindings: mfd: hi6421: Add hi6421v530 compatible string Add compatible string for HiSilicon Hi6421v530 PMIC. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com> | 8 年前 | |
dt-bindings: mfd: Drop unneeded quotes in 'ref', 'id' and 'schema' entries Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org | 3 年前 | |
mfd: dts: hi655x: Add clock binding for the pmic The hi655x PMIC provides the regulators but also a clock. The latter is missing in the definition, so extend the documentation to include this as well. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> [Ulf: Split patch and updated changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> | 9 年前 | |
dt-bindings: mfd: Correct the node name of the panel LED According to the definition in leds-pwm.yaml, the node name of each LED must match the regular expression "^led(-[0-9a-f]+)?$". "led" or "led-" followed by a decimal or hexadecimal ID number. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ... | 3 年前 | |
dt-bindings: mfd: Add bindings for sl28cpld Add a device tree bindings for the board management controller found on the Kontron SMARC-sAL28 board. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
Documentation: Add LP3943 DT bindings and document Bindings for LP3943 MFD, GPIO and PWM controller are added. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 12 年前 | |
regulator: lp873x: Add support for populating input supply In order to have a proper topology of regulators for a platform, each registering regulator needs to populate supply_name field for identifying its supply's name. Add supply_name field for lp873x regulators. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> | 9 年前 | |
dt-bindings: mfd: max77620: Add system-power-controller property Document new generic property that designates the PMIC as the system's power controller. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 7 年前 | |
dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes Several regulator schemas are missing 'unevaluatedProperties' constraint which means any extra properties are allowed. Upon adding the constraint, there's numerous warnings from using the deprecated 'regulator-compatible' property. Remove the usage as examples shouldn't be using long since deprecated properties. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20221206211554.92005-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
Documentation: Add docs for max8925 dt add docs for dt of max8925-mfd, max8925-backlight, and max8925-battery Signed-off-by: Qing Xu <qingx@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 13 年前 | |
regulator/mfd: max8998: Document charger regulator max8998 has a current regulator for control of its charging current. Document it. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/BN6PR04MB06600D05B27BAE69970E3C30A3BA0@BN6PR04MB0660.namprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org> | 6 年前 | |
dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220823145649.3118479-4-robh@kernel.org | 3 年前 | |
dt-bindings: mfd: Add MAX5970 and MAX5978 The MAX597x is a hot swap controller with configurable fault protection. It also has 10bit ADC for current & voltage measurements. ... Changes in V12: - Update title Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Co-developed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Co-developed-by: Naresh Solanki <Naresh.Solanki@9elements.com> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230307121246.127425-1-Naresh.Solanki@9elements.com | 3 年前 | |
dt-bindings: update Krzysztof Kozlowski's email Krzysztof Kozlowski's @canonical.com email stopped working, so switch to generic @kernel.org account for all Devicetree bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org | 4 年前 | |
dt-bindings: mfd: Revert "dt-bindings: mfd: maxim,max77693: Add USB connector" This reverts commit da7ee30ae6662f016f28a9ef090b2132b3c0fb48. Commit da7ee30ae666 ("dt-bindings: mfd: maxim,max77693: Add USB connector") was an earlier version of my patch adding the connector, later superseded by commit 789c9ce9b46f ("dt-bindings: mfd: maxim,max77693: Add USB connector"). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230905075558.21219-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: update Luca Ceresoli's e-mail address My Bootlin address is preferred from now on. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220603155727.1232061-2-luca@lucaceresoli.net | 4 年前 | |
dt-bindings: update Krzysztof Kozlowski's email Krzysztof Kozlowski's @canonical.com email stopped working, so switch to generic @kernel.org account for all Devicetree bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org | 4 年前 | |
dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220823145649.3118479-4-robh@kernel.org | 3 年前 | |
dt-bindings: mfd: mc13xxx: Add the unit address to sysled As the 'reg' property is mandatory in the subnodes, improve the example by adding the unit address to the sysled node. This prevents the following build warning with W=1: Node /soc/aips@70000000/spba@70000000/ecspi@70010000/pmic@0/leds/sysled0 has a reg or ranges property, but no unit name Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 8 年前 | |
dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: Add missing 'unevaluatedProperties' to regulator nodes Several regulator schemas are missing 'unevaluatedProperties' constraint which means any extra properties are allowed. Upon adding the constraint, there's numerous warnings from using the deprecated 'regulator-compatible' property. Remove the usage as examples shouldn't be using long since deprecated properties. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Link: https://lore.kernel.org/r/20221206211554.92005-1-robh@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> | 3 年前 | |
dt-bindings: Add missing (unevaluated|additional)Properties on child node schemas Just as unevaluatedProperties or additionalProperties are required at the top level of schemas, they should (and will) also be required for child node schemas. That ensures only documented properties are present. Add unevaluatedProperties or additionalProperties as appropriate, and then add any missing properties flagged by the addition. Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230124230228.372305-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186 Add a new scpsys compatible for mt8186 SoC. Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220923131148.6678-2-allen-kh.cheng@mediatek.com | 3 年前 | |
dt-bindings: Remove leading zeros from bindings notation Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' find ./Documentation/devicetree/bindings "*.txt" Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org> | 8 年前 | |
dt-bindings: power: supply: cpcap-charger: update cpcap-charger.yaml reference Changeset ce49e4282200 ("dt-bindings: power: supply: cpcap-charger: Convert to DT schema format") renamed: Documentation/devicetree/bindings/power/supply/cpcap-charger.txt to: Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml. Update its cross-reference accordingly. Fixes: ce49e4282200 ("dt-bindings: power: supply: cpcap-charger: Convert to DT schema format") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/e9ce216362b7b9dcf84d707a3854247123440bf7.1622648507.git.mchehab+huawei@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 5 年前 | |
dt-bindings: mfd: Add mp2733 compatible Add new compatible for mp2733 mfd driver. Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220615145357.2370044-3-sravanhome@gmail.com | 3 年前 | |
dt-bindings: mfd: ocelot: add ethernet-switch hardware support The main purpose of the Ocelot chips are the Ethernet switching functionalities. Document the support for these features. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # regression Signed-off-by: Jakub Kicinski <kuba@kernel.org> | 3 年前 | |
dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC stable inclusion from stable-v6.6.2 commit b5092e8c38dc4fdd6b8baf49332ba4de77004129 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8IW7G Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=b5092e8c38dc4fdd6b8baf49332ba4de77004129 -------------------------------- [ Upstream commit 61fdd1f1d2c183ec256527d16d75e75c3582af82 ] The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has a different set of regulators. Specifically, it lacks the camera related VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs. The PMICs contain a chip ID register that can be used to detect which exact model is preset, so it is possible to share a common base compatible string. Add a separate compatible for the MT6366 PMIC, with a fallback to the MT6358 PMIC. Fixes: 49be16305587 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> | 2 年前 | |
dt-bindings: Remove "status" from examples Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org> | 8 年前 | |
dt-bindings: mfd: Add binding for Netronix embedded controller This EC is found in e-book readers of multiple brands (e.g. Kobo, Tolino), and is typically implemented as a TI MSP430 microcontroller. It controls different functions of the system, such as power on/off, RTC, PWM for the backlight. The exact functionality provided can vary between boards. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
dt-bindings: mfd: Add NXP BBNSM Add binding for NXP BBNSM(Battery-Backed Non-Secure Module). Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230129070823.1945489-2-ping.bai@nxp.com | 3 年前 | |
dt-bindings: usb: Convert OMAP OHCI/EHCI bindings to schema The OMAP OHCI and EHCI USB host bindings follow the generic binding, so add the compatibles and remove the old txt binding docs. The examples in omap-usb-host.txt don't match actual users, so update them dropping the fallback compatible. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230110-dt-usb-v3-3-5af0541fcf8c@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 3 年前 | |
mfd: omap-usb-tll: Update DT clock binding information The omap-usb-tll driver needs one clock for each TLL channel. Add this information to the DT binding document. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 12 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: Update Guru Das Srinagesh's email address Clean up my email address as the codeaurora.org address is not used anymore. Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com> Link: https://lore.kernel.org/r/20230728001622.4938-1-quic_gurus@quicinc.com Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
dt-bindings: mfd: qcom,spmi-pmic: Document PMC8180 and PMC8180C Document qcom,pmc8180 and qcom,pmc8180c compatibles already used in DTS: sc8180x-primus.dtb: pmic@1: compatible:0: 'qcom,pmc8180' is not one of ... Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230720083525.73622-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074 Document the qcom,tcsr-ipq8074 compatible. Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230526110653.27777-2-quic_viswanat@quicinc.com | 3 年前 | |
dt-bindings: mfd: Drop unneeded quotes in 'ref', 'id' and 'schema' entries Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org | 3 年前 | |
devcietree: bindings: add some MFD Keymile FPGAs These are the bindings for 2 MFD devices used on some of the Keymile boards. The first one is the chassis managmenet bfticu FPGA. The second one is the board controller (reset, LEDs, GPIOs) QRIO CPDL. These FPGAs are used in the kmcoge4 board. Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Signed-off-by: Scott Wood <scottwood@freescale.com> | 11 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
mfd: rt4831: Adds DT binding document for Richtek RT4831 Adds DT binding document for Richtek RT4831. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
dt-bindings: Add rt5033 MFD, Regulator and Charger Add device tree binding documentation for rt5033 multifunction device, voltage regulator and battery charger. Signed-off-by: Jakob Hauser <jahau@rocketmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/bff139976865c2a489ab62333d78c4e3179a8eae.1684182964.git.jahau@rocketmail.com | 3 年前 | |
dt-binding: mfd: Add Richtek RT5120 PMIC support Add Richtek RT5120 PMIC devicetree document. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/1660100142-32493-2-git-send-email-u0084500@gmail.com | 3 年前 | |
dt-bindings: mfd: ricoh,rn5t618: Trivial: Fix spelling mistake of 'additionally' Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
dt-bindings: mfd: rk808: Convert bindings to yaml Convert the rk808 bindings into yaml format. clock-output-names varies in maxItems depending on whether or not the clock-cells is 0 or 1. For the rk805, rk809, and rk817. This preserves behavior with the existing driver handling setting the clock for these specific PMICs. When this driver is corrected and the devicetrees updated this logic can be removed (since the rk805, rk808, and rk817 only have one actual clock). Note this patch was previously sent as a series, all of the patches in the series except this one have been committed to mainline. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com | 4 年前 | |
dt-bindings: mfd: Add rk806 binding Add DT binding document for Rockchip's RK806 PMIC. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20230504173618.142075-8-sebastian.reichel@collabora.com Signed-off-by: Lee Jones <lee@kernel.org> | 3 年前 | |
dt-bindings: mfd: rk808: Convert bindings to yaml Convert the rk808 bindings into yaml format. clock-output-names varies in maxItems depending on whether or not the clock-cells is 0 or 1. For the rk805, rk809, and rk817. This preserves behavior with the existing driver handling setting the clock for these specific PMICs. When this driver is corrected and the devicetrees updated this logic can be removed (since the rk805, rk808, and rk817 only have one actual clock). Note this patch was previously sent as a series, all of the patches in the series except this one have been committed to mainline. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com | 4 年前 | |
dt-bindings: mfd: rk808: Convert bindings to yaml Convert the rk808 bindings into yaml format. clock-output-names varies in maxItems depending on whether or not the clock-cells is 0 or 1. For the rk805, rk809, and rk817. This preserves behavior with the existing driver handling setting the clock for these specific PMICs. When this driver is corrected and the devicetrees updated this logic can be removed (since the rk805, rk808, and rk817 only have one actual clock). Note this patch was previously sent as a series, all of the patches in the series except this one have been committed to mainline. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com | 4 年前 | |
dt-bindings: power: supply: define monitored-battery in common place Define the type of monitored-battery in power-supply.yaml common schema. Reference the schema where applicable to enforce the above in bindings which have monitored-battery property. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> | 3 年前 | |
dt-bindings: mfd: rk808: Convert bindings to yaml Convert the rk808 bindings into yaml format. clock-output-names varies in maxItems depending on whether or not the clock-cells is 0 or 1. For the rk805, rk809, and rk817. This preserves behavior with the existing driver handling setting the clock for these specific PMICs. When this driver is corrected and the devicetrees updated this logic can be removed (since the rk805, rk808, and rk817 only have one actual clock). Note this patch was previously sent as a series, all of the patches in the series except this one have been committed to mainline. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220519161731.1168-1-macroalpha82@gmail.com | 4 年前 | |
dt-bindings: mfd: bd71815: Fix rsense and typos stable inclusion from stable-v6.6.76 commit 7fd7fd629a3314e84e051b7c26b6a6952ffc3299 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IBW08Q Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=7fd7fd629a3314e84e051b7c26b6a6952ffc3299 -------------------------------- [ Upstream commit 6856edf7ead8c54803216a38a7b227bcb3dadff7 ] The sense resistor used for measuring currents is typically some tens of milli Ohms. It has accidentally been documented to be tens of mega Ohms. Fix the size of this resistor and a few copy-paste errors while at it. Drop the unsuitable 'rohm,charger-sense-resistor-ohms' property (which can't represent resistors smaller than one Ohm), and introduce a new 'rohm,charger-sense-resistor-micro-ohms' property with appropriate minimum, maximum and default values instead. Fixes: 4238dc1e6490 ("dt_bindings: mfd: Add ROHM BD71815 PMIC") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/0efd8e9de0ae8d62ee4c6b78cc565b04007a245d.1731430700.git.mazziesaccount@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 7fd7fd629a3314e84e051b7c26b6a6952ffc3299) Signed-off-by: Wentao Guan <guanwentao@uniontech.com> | 1 年前 | |
dt-bindings: mfd: Drop unneeded quotes in 'ref', 'id' and 'schema' entries Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org | 3 年前 | |
Merge tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add support for Ampere Computing SMpro - Add support for TI TPS65219 PMIC New Functionality: - Add support for multiple devices of the same type; rk808 Fix-ups: - Convert a bunch of I2C class drivers over to .probe_new() - Remove superfluous includes; mc13xxx-*, palmas, timberdale - Use correct includes for GPIO handling; madera-core - Convert to GPIOD; twl6040 - Remove unused platform data handling; twl6040 - Device Tree changes; many - Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld - Add support for modules; palmas - Enable COMPILE_TEST support; intel_soc_pmic* - Trivial: spelling / whitespace fixes; mc13xxx-spi - Replace old PM helpers with new ones; many - Convert deprecated mask_invert usage to unmask_base; many - Use devm_*() calls; qcom_rpm - MAINTAINER fix-ups - Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc, stm32-lptimer, qcom_rpm, rohm-* Bug Fixes: - Add bounds / error checking; mt6360-core - No sleeping inside critical sections; axp20x - Fix missing dependencies; ROHM_BD957XMUF - Repair error paths; qcom-pm8008" * tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits) dt-bindings: mfd: da9062: Correct file name for watchdog mfd: pm8008: Fix return value check in pm8008_probe() mfd: rohm: Use dev_err_probe() mfd: Drop obsolete dependencies on COMPILE_TEST dt-bindings: mfd: da9062: Move IRQ to optional properties mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe() mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource() mfd: rohm-bd9576: Convert to i2c's .probe_new() mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource() dt-bindings: Fix maintainer email for a few ROHM ICs mfd: palmas: Use device_get_match_data() to simplify the code Input: Add tps65219 interrupt driven powerbutton mfd: tps65219: Add driver for TI TPS65219 PMIC mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ mfd: wcd934x: Convert irq chip to config regs mfd: tps65090: Replace irqchip mask_invert with unmask_base mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base mfd: stpmic1: Fix swapped mask/unmask in irq chip mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base ... | 3 年前 | |
dt-bindings: mfd: bd71847-pmic: Remove unneeded LED header There is nothing from <dt-bindings/leds/common.h> that is needed by the binding example. Remove the unneeded inclusion. Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20230804021657.190700-1-festevam@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: bd9571mwv: Convert to json-schema Convert the ROHM BD9571MWV/BD9574MWF Power Management Integrated Circuit (PMIC) Device Tree binding documentation to json-schema. Make the "regulators" subnode optional, as not all users describe the regulators. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/76fdd209e6a2dada7ff50b8ad03eb14e7f3547a6.1635338031.git.geert+renesas@glider.be | 4 年前 | |
dt-bindings: Fix typos Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
Merge tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for {Power,Home} Keys to MediaTek MT6359 - Add support for SC2730 to Spreadtrum SPRD SC27XX SPI - Add support for additional Alder Lake-P I2C Controllers to Intel LPSS PCI Fix-ups: - Convert GPIO to GPIOD (hi655x-pmic) - Only register devices that exist (cros_ec_dev) - Remove unused code (syscon, reg-mux) - Rework .remove() API to return void (twl-core, rt4831) - Trivial - whitespace, spelling, coding style (tps65218, sprd-sc27xx-spi, google,cros-ec) - DT binding changes (samsung,exynos5433-lpass, rockchip,rk805, rockchip,rk808, rockchip,rk809, rockchip,rk817, rockchip,rk818, wlf,arizona) Bug Fixes: - Fix error handling bugs (ipaq-micro, davinci_voicecodec)" * tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: dt-bindings: cros-ec: Fix a typo in description dt-bindings: mfd: wlf,arizona: Add spi-max-frequency mfd: rt4831: Improve error reporting for problems during .remove() mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe() mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7 dt-bindings: mfd: rk808: Convert bindings to yaml mfd: twl4030: Make twl4030_exit_irq() return void mfd: twl6030: Make twl6030_exit_irq() return void dt-bindings: mfd: samsung,exynos5433-lpass: Fix 'dma-channels/requests' properties mfd: sprd: Jugle {of,spi}_device_id tables into numerical order mfd: sprd: Add SC2730 PMIC to SPI device ID table dt-bindings: Drop undocumented i.MX iomuxc-gpr bindings in examples mfd: cros_ec_dev: Only register PCHG device if present mfd: mt6397-core: Add resources for PMIC keys for MT6359 mfd: mt6359: Add missing defines necessary for mtk-pmic-keys support mfd: ipaq-micro: Fix error check return value of platform_get_irq() mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interface mfd: tps65218: Fix trivial typo in comment | 4 年前 | |
dt-bindings: update Krzysztof Kozlowski's email Krzysztof Kozlowski's @canonical.com email stopped working, so switch to generic @kernel.org account for all Devicetree bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org | 4 年前 | |
dt-bindings: update Krzysztof Kozlowski's email Krzysztof Kozlowski's @canonical.com email stopped working, so switch to generic @kernel.org account for all Devicetree bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20220330074016.12896-2-krzysztof.kozlowski@linaro.org | 4 年前 | |
dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties Mutually exclusive s5m8767,pmic-buck[234]-uses-gpio-dvs properties can be written simpler, with half of the lines of code. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230619101424.25897-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 3 年前 | |
dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220823145649.3118479-4-robh@kernel.org | 3 年前 | |
dt-bindings: move backlight bindings under leds Backlights are generally a subtype of LEDs at least from a software point of view if not always electrically. Move the bindings from the video directory to underneath the leds dir. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> | 10 年前 | |
dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation This patch adds the binding documentation for Spreadtrum SC27xx series PMIC device. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 8 年前 | |
dt-bindings: mfd: sprd: Add bindings for ums512 global registers Add bindings for Unisoc system global register which provide register map for clocks. Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Cixi Geng <cixi.geng1@unisoc.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20220909152421.278662-2-gengcixi@gmail.com | 3 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: drop redundant part of title (end, part three) The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: \(.*\) [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> # ROHM Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # MMC Acked-by: Stephen Boyd <sboyd@kernel.org> # clk Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # input Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # media Acked-by: Sebastian Reichel <sre@kernel.org> # power Acked-by: Viresh Kumar <viresh.kumar@linaro.org> # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: mfd: Convert STMPE to YAML schema This converts the STMPE MFD device tree bindings to the YAML schema. Reference the existing schema for the ADC, just define the other subnode schemas directly in the MFD schema. Add two examples so we have examples covering both the simple GPIO expander and the more complex with ADC and touchscreen. Some in-tree users do not follow the naming conventions for nodes so these DTS files need to be augmented to use proper node names like "adc", "pwm", "gpio", "keyboard-controller" etc before the bindings take effect on them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230709-stmpe-dt-bindings-v5-1-34a3d6ee1e57@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: mfd: st,stpmic1: Merge patterns for nodes Properties should be described only once, thus having separate pattern for children just to specify the $ref to regulator.yaml is not correct. It also makes impossible to finish it with additional/unevaluatedProperties:false to restrict allowed properties in regulator node. Merge the patterns, so each regulator subnode has regulator.yaml $ref, additional properties and ends with additionalProperties:false. This points to missing regulator-min/max-microvolt in LDO4 node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230726065633.74924-1-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org> | 2 年前 | |
dt-bindings: Fix typos Fix typos in Documentation/devicetree/bindings. The changes are in descriptions or comments where they shouldn't affect functionality. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 2 年前 | |
Merge tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull NFD updates from Lee Jones: "New Drivers: - Add support for the Cirrus Logic CS42L43 Audio CODEC Fix-ups: - Make use of specific printk() format tags for various optimisations - Kconfig / module modifications / tweaking - Simplify obtaining resources (memory, device data) using unified API helpers - Bunch of Device Tree additions, conversions and adaptions - Convert a bunch of Regmap configurations to use the Maple Tree cache - Ensure correct includes are present and remove some that are not required - Remove superfluous code - Reduce amount of cycles spent in critical sections - Omit the use of redundant casts and if relevant replace with better ones - Swap out raw_spin_{un}lock_irq{save,restore}() for spin_{un}lock_irq{save,restore}() Bug Fixes: - Repair theoretical deadlock situation - Fix some link-time dependencies - Use more appropriate datatype when casting" * tag 'mfd-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (70 commits) mfd: mc13xxx: Simplify device data fetching in probe() mfd: rz-mtu3: Replace raw_spin_lock->spin_lock() mfd: rz-mtu3: Reduce critical sections mfd: mxs-lradc: Fix Wvoid-pointer-to-enum-cast warning mfd: wm31x: Fix Wvoid-pointer-to-enum-cast warning mfd: wm8994: Fix Wvoid-pointer-to-enum-cast warning mfd: tc3589: Fix Wvoid-pointer-to-enum-cast warning mfd: lp87565: Fix Wvoid-pointer-to-enum-cast warning mfd: hi6421-pmic: Fix Wvoid-pointer-to-enum-cast warning mfd: max77541: Fix Wvoid-pointer-to-enum-cast warning mfd: max14577: Fix Wvoid-pointer-to-enum-cast warning mfd: stmpe: Fix Wvoid-pointer-to-enum-cast warning mfd: rn5t618: Remove redundant of_match_ptr() mfd: lochnagar-i2c: Remove redundant of_match_ptr() mfd: stpmic1: Remove redundant of_match_ptr() mfd: act8945a: Remove redundant of_match_ptr() mfd: rsmu_spi: Remove redundant of_match_ptr() mfd: altera-a10sr: Remove redundant of_match_ptr() mfd: rsmu_i2c: Remove redundant of_match_ptr() mfd: tc3589x: Remove redundant of_match_ptr() ... | 2 年前 | |
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible Add Nuvoton ma35d1 system registers compatible. Signed-off-by: Jacky Huang <ychuang3@nuvoton.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230328021912.177301-6-ychuang570808@gmail.com | 3 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: mfd: ti,am3359-tscadc: Add missing power-domains property Add optional power-domains property to avoid the following dt-schema failures: tscadc@40200000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Matt Ranostay <mranostay@ti.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20221025080014.403457-1-mranostay@ti.com | 3 年前 | |
dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example The binding for ti,am654-ehrpwm-tbclk was updated to remove the syscon compatible hint. Remove the same from the example in this binding. Signed-off-by: Andrew Davis <afd@ti.com> Link: https://lore.kernel.org/r/20230623201519.194269-1-afd@ti.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> | 3 年前 | |
dt-bindings: mfd: lp875xx: Add optional reset GPIO Document the LP8756x-Q1 and LP87524-Q1 ICs reset pin. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
dt-bindings: mfd: lp875xx: Add optional reset GPIO Document the LP8756x-Q1 and LP87524-Q1 ICs reset pin. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
dt-bindings: Use 'enum' instead of 'oneOf' plus 'const' entries 'enum' is equivalent to 'oneOf' with a list of 'const' entries, but 'enum' is more concise and yields better error messages. Cc: Maxime Ripard <mripard@kernel.org> Cc: Vignesh R <vigneshr@ti.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: dmaengine@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-phy@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-spi@vger.kernel.org Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> (mipi-ccs) Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210824202014.978922-1-robh@kernel.org | 4 年前 | |
dt-bindings: mfd: Add TI-Nspire misc registers The TI Nspire devices contain a set of registers with a seemingly miscellaneous set of functionality. This area is known simply as the "misc" region. Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230308165557.2242-2-afd@ti.com | 3 年前 | |
dt-bindings: Fix SPI and I2C bus node names in examples SPI and I2C bus node names are expected to be "spi" or "i2c", respectively, with nothing else, a unit-address, or a '-N' index. A pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these cases. Mostly scripted with the following commands: git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/' git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/' With this, a few errors in examples were exposed and fixed. Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply Acked-by: Wolfram Sang <wsa@kernel.org> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230228215433.3944508-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 3 年前 | |
dt-bindings: mfd: Add TI TPS6594 PMIC TPS6594 is a Power Management IC which provides regulators and others features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and PFSM (Pre-configurable Finite State Machine) managing the state of the device. TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. Signed-off-by: Julien Panis <jpanis@baylibre.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230511095126.105104-2-jpanis@baylibre.com | 3 年前 | |
dt-bindings: Remove leading 0x from bindings notation Improve the binding example by removing all the leading 0x to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" Converted using the following command: find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} + This is a follow up to commit 48c926cd3414 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Rob Herring <robh@kernel.org> | 8 年前 | |
dt-bindings: mfd: Add lm36274 bindings to ti-lmu Add the LM36274 backlight driver with regulator support. This is a multi-function device for backlight applications. Backlight properties will be documented in it's a supplemental bindings document. Regulator support is documented in the regulator/lm363x-regulator.txt http://www.ti.com/lit/ds/symlink/lm36274.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> | 7 年前 | |
dt-bindings: mfd: update TI tps6105x chip bindings The driver has been extended to optionally get its operational mode, regulator init data and LED naming from the devicetree. Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> | 6 年前 | |
tps6507x.txt: Remove executable permission Documention text files shouldn't be executable. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Rob Herring <robh@kernel.org> | 10 年前 | |
dt-bindings: mfd: tps65910: Improve grammar Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org> | 6 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
mfd: Replace HTTP links with HTTPS ones Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain \bxmlns\b: For each link, \bhttp://[^# \t\r\n]*(?:\w|/): If neither \bgnu\.org/license, nor \bmozilla\.org/MPL\b: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 5 年前 | |
mfd: twl4030-audio: Add DT support Support for loading the twl4030 audio module via devicetree. Sub devices for codec and vibra will be created as mfd devices once the core MFD driver is loaded when the kernel is booted with a DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> | 13 年前 | |
mfd: dt-bindings: twl4030-power: Use the standard property to mark power control ti,system-power-controller is more or less the standard way of indicating that the PMIC is the system wide power controller and hence may be used to switch off the system. Almost ALL TI PMIC drivers and many Maxim PMIC drivers follow the same style. So support 'ti,system-power-controller' in addition to the usual 'ti,use_poweroff' to indicate that the PMIC instance has control for switching off the system. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> | 11 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: mfd: Drop unneeded quotes in 'ref', 'id' and 'schema' entries Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org | 3 年前 | |
dt-bindings: remove 'interrupt-parent' from bindings 'interrupt-parent' is often documented as part of define bindings, but it is really outside the scope of a device binding. It's never required in a given node as it is often inherited from a parent node. Or it can be implicit if a parent node is an 'interrupt-controller' node. So remove it from all the binding files. Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 7 年前 | |
dt-bindings: mfd: Drop unneeded quotes in 'ref', 'id' and 'schema' entries Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org | 3 年前 | |
dt-bindings: mfd: Add bindings for AXP192 MFD device The AXP192 PMIC is similar to the AXP202/AXP209, but with different regulators, additional GPIOs, and a different IRQ register layout, so it needs a new compatible string. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230511092609.76183-2-aidanmacdonald.0x0@gmail.com Signed-off-by: Lee Jones <lee@kernel.org> | 3 年前 | |
dt-bindings: mfd: Drop unneeded quotes in 'ref', 'id' and 'schema' entries Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230322173519.3971434-1-robh@kernel.org | 3 年前 | |
dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org> | 6 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 13 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 13 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 9 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 7 年前 | ||
| 11 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 8 年前 | ||
| 8 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 8 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 10 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 9 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 12 年前 | ||
| 9 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 13 年前 | ||
| 6 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 8 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 12 年前 | ||
| 7 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 11 年前 | ||
| 7 年前 | ||
| 5 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 4 年前 | ||
| 1 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 2 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 10 年前 | ||
| 8 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 5 年前 | ||
| 5 年前 | ||
| 4 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 8 年前 | ||
| 7 年前 | ||
| 6 年前 | ||
| 10 年前 | ||
| 6 年前 | ||
| 7 年前 | ||
| 5 年前 | ||
| 13 年前 | ||
| 11 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 7 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 3 年前 | ||
| 6 年前 |