PPaolo Bonzinimeson: remove CONFIG_ALL
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
hw/cxl/device: Add a memory device (8.2.8.5) A CXL memory device (AKA Type 3) is a CXL component that contains some combination of volatile and persistent memory. It also implements the previously defined mailbox interface as well as the memory device firmware interface. Although the memory device is configured like a normal PCIe device, the memory traffic is on an entirely separate bus conceptually (using the same physical wires as PCIe, but different protocol). Once the CXL topology is fully configure and address decoders committed, the guest physical address for the memory device is part of a larger window which is owned by the platform. The creation of these windows is later in this series. The following example will create a 256M device in a 512M window: -object "memory-backend-file,id=cxl-mem1,share,mem-path=cxl-type3,size=512M" -device "cxl-type3,bus=rp0,memdev=cxl-mem1,id=cxl-pmem0" Note: Dropped PCDIMM info interfaces for now. They can be added if appropriate at a later date. Signed-off-by: Ben Widawsky <ben.widawsky@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20220429144110.25167-18-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 4 年前 | |
hw/cxl: Add tunneled command support to mailbox for switch cci. This implementation of tunneling makes the choice that our Type 3 device is a Logical Device (LD) of a Multi-Logical Device (MLD) that just happens to only have one LD for now. Tunneling is supported from a Switch Mailbox CCI (and shortly via MCTP over I2C connected to the switch MCTP CCI) via an outer level to the FM owned LD in the MLD Type 3 device. From there an inner tunnel may be used to access particular LDs. Protocol wise, the following is what happens in a real system but we don't emulate the transports - just the destinations and the payloads. ( Host -> Switch Mailbox CCI - in band FM-API mailbox command or Host -> Switch MCTP CCI - MCTP over I2C using the CXL FM-API MCTP Binding. ) then (if a tunnel command) Switch -> Type 3 FM Owned LD - MCTP over PCI VDM using the CXL FM-API binding (addressed by switch port) then (if unwrapped command also a tunnel command) Type 3 FM Owned LD to LD0 via internal transport (addressed by LD number) or (added shortly) Host to Type 3 FM Owned MCTP CCI - MCTP over I2C using the CXL FM-API MCTP Binding. then (if unwrapped comand is a tunnel comamnd) Type 3 FM Owned LD to LD0 via internal transport. (addressed by LD number) It is worth noting that the tunneling commands over PCI VDM presumably use the appropriate MCTP binding depending on opcode. This may be the CXL FMAPI binding or the CXL Memory Device Binding. Additional commands will need to be added to make this useful beyond testing the tunneling works. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20231023160806.13206-18-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 2 年前 | |
hw/cxl: Line length reductions Michael Tsirkin observed that there were some unnecessarily long lines in the CXL code in a recent review. This patch is intended to rectify that where it does not hurt readability. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Fan Ni <fan.ni@samsung.com> Message-Id: <20231023140210.3089-5-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> | 2 年前 | |
hw/mem/memory-device.c: spelling fix: ontaining Fixes: 6c1b28e9e405 "memory-device: Support empty memory devices" Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> | 2 年前 | |
meson: remove CONFIG_ALL CONFIG_ALL is tricky to use and was ported over to Meson from the recursive processing of Makefile variables. Meson sourcesets however have all_sources() and all_dependencies() methods that remove the need for it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 2 年前 | |
hw/*: Use type casting for SysBusDevice in NPCM7XX A device shouldn't access its parent object which is QOM internal. Instead it should use type cast for this purporse. This patch fixes this issue for all NPCM7XX Devices. Signed-off-by: Hao Wu <wuhaotsh@google.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20210108190945.949196-7-wuhaotsh@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
nvdimm: Reject writing label data to ROM instead of crashing QEMU Currently, when using a true R/O NVDIMM (ROM memory backend) with a label area, the VM can easily crash QEMU by trying to write to the label area, because the ROM memory is mmap'ed without PROT_WRITE. [root@vm-0 ~]# ndctl disable-region region0 disabled 1 region [root@vm-0 ~]# ndctl zero-labels nmem0 -> QEMU segfaults Let's remember whether we have a ROM memory backend and properly reject the write request: [root@vm-0 ~]# ndctl disable-region region0 disabled 1 region [root@vm-0 ~]# ndctl zero-labels nmem0 zeroed 0 nmem In comparison, on a system with a R/W NVDIMM: [root@vm-0 ~]# ndctl disable-region region0 disabled 1 region [root@vm-0 ~]# ndctl zero-labels nmem0 zeroed 1 nmem For ACPI, just return "unsupported", like if no label exists. For spapr, return "H_P2", similar to when no label area exists. Could we rely on the "unarmed" property? Maybe, but it looks cleaner to only disallow what certainly cannot work. After all "unarmed=on" primarily means: cannot accept persistent writes. In theory, there might be setups where devices with "unarmed=on" set could be used to host non-persistent data (temporary files, system RAM, ...); for example, in Linux, admins can overwrite the "readonly" setting and still write to the device -- which will work as long as we're not using ROM. Allowing writing label data in such configurations can make sense. Message-ID: <20230906120503.359863-2-david@redhat.com> Fixes: dbd730e85987 ("nvdimm: check -object memory-backend-file, readonly=on option") Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> | 2 年前 | |
virtio-balloon: optimize the virtio-balloon on the ARM platform Optimize the virtio-balloon feature on the ARM platform by adding a variable to keep track of the current hot-plugged pc-dimm size, instead of traversing the virtual machine's memory modules to count the current RAM size during the balloon inflation or deflation process. This variable can be updated only when plugging or unplugging the device, which will result in an increase of approximately 60% efficiency of balloon process on the ARM platform. We tested the total amount of time required for the balloon inflation process on ARM: inflate the balloon to 64GB of a 128GB guest under stress. Before: 102 seconds After: 42 seconds Signed-off-by: Qi Xi <xiqi2@huawei.com> Signed-off-by: Ming Yang yangming73@huawei.com Message-Id: <e13bc78f96774bfab4576814c293aa52@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> | 3 年前 | |
*: Add missing includes of qemu/error-report.h This had been pulled in via qemu/plugin.h from hw/core/cpu.h, but that will be removed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org> [AJB: add various additional cases shown by CI] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org> Reviewed-by: Emilio Cota <cota@braap.org> | 3 年前 | |
docs: fix references to docs/devel/tracing.rst Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 5 年前 | |
trace: switch position of headers to what Meson requires Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 |