| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
hw/vfio: Move the IGD quirk code to a separate file The IGD quirk code defines a separate device, the so-called "vfio-pci-igd-lpc-bridge" which shows up as a user-creatable device in all QEMU binaries that include the vfio code. This is a little bit unfortunate for two reasons: First, this device is completely useless in binaries like qemu-system-s390x. Second we also would like to disable it in downstream RHEL which currently requires some extra patches there since the device does not have a proper Kconfig-style switch yet. So it would be good if the device could be disabled more easily, thus let's move the code to a separate file instead and introduce a proper Kconfig switch for it which gets only enabled by default if we also have CONFIG_PC_PCI enabled. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 6 年前 | |
Include migration/vmstate.h less In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> | 6 年前 | |
vfio: Introduce a helper function to initialize VFIODevice Introduce a helper function to replace the common code to initialize VFIODevice in pci, platform, ap and ccw VFIO device. No functional change intended. Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
Include migration/vmstate.h less In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> | 6 年前 | |
vfio: Introduce a helper function to initialize VFIODevice Introduce a helper function to replace the common code to initialize VFIODevice in pci, platform, ap and ccw VFIO device. No functional change intended. Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
hw/vfio: fix iteration over global VFIODevice list Commit 3d779abafe ("vfio/common: Introduce a global VFIODevice list") introduced a global VFIODevice list, but forgot to update the list element field name when iterating over the new list. Change the code to use the correct list element field. Fixes: 3d779abafe ("vfio/common: Introduce a global VFIODevice list") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2061 Signed-off-by: Volker Rümelin <vr_qemu@t-online.de> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> | 2 年前 | |
vfio/container: Introduce a VFIOIOMMU QOM interface VFIOContainerBase was not introduced as an abstract QOM object because it felt unnecessary to expose all the IOMMU backends to the QEMU machine and human interface. However, we can still abstract the IOMMU backend handlers using a QOM interface class. This provides more flexibility when referencing the various implementations. Simply transform the VFIOIOMMUOps struct in an InterfaceClass and do some initial name replacements. Next changes will start converting VFIOIOMMUOps. Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
vfio/container: Rename vfio_init_container to vfio_set_iommu vfio_container_init() and vfio_init_container() names are confusing especially when we see vfio_init_container() calls vfio_container_init(). vfio_container_init() operates on base container which is consistent with all routines handling 'VFIOContainerBase *' ops. vfio_init_container() operates on legacy container and setup IOMMU context with ioctl(VFIO_SET_IOMMU). So choose to rename vfio_init_container to vfio_set_iommu to avoid the confusion. No functional change intended. Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
hw/vfio: Constify VMState Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20231221031652.119827-60-richard.henderson@linaro.org> | 2 年前 | |
vfio: Introduce a helper function to initialize VFIODevice Introduce a helper function to replace the common code to initialize VFIODevice in pci, platform, ap and ccw VFIO device. No functional change intended. Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
*: Add missing includes of qemu/error-report.h This had been pulled in via qemu/plugin.h from hw/core/cpu.h, but that will be removed. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230310195252.210956-5-richard.henderson@linaro.org> [AJB: add various additional cases shown by CI] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230315174331.2959-15-alex.bennee@linaro.org> Reviewed-by: Emilio Cota <cota@braap.org> | 3 年前 | |
vfio/iommufd: Remove the use of stat() to check file existence Using stat() before opening a file or a directory can lead to a time-of-check to time-of-use (TOCTOU) filesystem race, which is reported by coverity as a Security best practices violations. The sequence could be replaced by open and fdopendir but it doesn't add much in this case. Simply use opendir to avoid the race. Fixes: CID 1531551 Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Zhenzhong Duan <Zhenzhong.duan@intel.com> | 2 年前 | |
vfio/spapr: Only compile sPAPR IOMMU support when needed sPAPR IOMMU support is only needed for pseries machines. Compile out support when CONFIG_PSERIES is not set. This saves ~7K of text. Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
vfio/migration: Add helper function to set state or reset device There are several places where failure in setting the device state leads to a device reset, which is done by setting ERROR as the recover state. Add a helper function that sets the device state and resets the device in case of failure. This will make the code cleaner and remove duplicate comments. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> | 2 年前 | |
spapr: Remove support for NVIDIA V100 GPU with NVLink2 NVLink2 support was removed from the PPC PowerNV platform and VFIO in Linux 5.13 with commits : 562d1e207d32 ("powerpc/powernv: remove the nvlink support") b392a1989170 ("vfio/pci: remove vfio_pci_nvlink2") This was 2.5 years ago. Do the same in QEMU with a revert of commit ec132efaa81f ("spapr: Support NVIDIA V100 GPU with NVLink2"). Some adjustements are required on the NUMA part. Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-ID: <20230918091717.149950-1-clg@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> | 2 年前 | |
vfio/container: Introduce a VFIOIOMMU QOM interface VFIOContainerBase was not introduced as an abstract QOM object because it felt unnecessary to expose all the IOMMU backends to the QEMU machine and human interface. However, we can still abstract the IOMMU backend handlers using a QOM interface class. This provides more flexibility when referencing the various implementations. Simply transform the VFIOIOMMUOps struct in an InterfaceClass and do some initial name replacements. Next changes will start converting VFIOIOMMUOps. Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
vfio/pci: Introduce a vfio pci hot reset interface Legacy vfio pci and iommufd cdev have different process to hot reset vfio device, expand current code to abstract out pci_hot_reset callback for legacy vfio, this same interface will also be used by iommufd cdev vfio device. Rename vfio_pci_hot_reset to vfio_legacy_pci_hot_reset and move it into container.c. vfio_pci_[pre/post]_reset and vfio_pci_host_match are exported so they could be called in legacy and iommufd pci_hot_reset callback. Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
vfio: Introduce a helper function to initialize VFIODevice Introduce a helper function to replace the common code to initialize VFIODevice in pci, platform, ap and ccw VFIO device. No functional change intended. Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
vfio/spapr: Introduce a sPAPR VFIOIOMMU QOM interface Move vfio_spapr_container_setup() to a VFIOIOMMUClass::setup handler and convert the sPAPR VFIOIOMMUOps struct to a QOM interface. The sPAPR QOM interface inherits from the legacy QOM interface because because both have the same basic needs. The sPAPR interface is then extended with the handlers specific to the sPAPR IOMMU. This allows reuse and provides better abstraction of the backends. It will be useful to avoid compiling the sPAPR IOMMU backend on targets not supporting it. Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Tested-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
vfio/iommufd: Enable pci hot reset through iommufd cdev interface Implement the newly introduced pci_hot_reset callback named iommufd_cdev_pci_hot_reset to do iommufd specific check and reset operation. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> | 2 年前 | |
trace: switch position of headers to what Meson requires Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 |
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
| 6 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 6 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 3 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 2 年前 | ||
| 5 年前 |