HHelge Dellertarget/hppa: Update SeaBIOS-hppa to version 15
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
meson: unpack edk2 firmware even if --disable-blobs The edk2 firmware blobs are needed to run bios-tables-test. Unpack them if any UEFI-enabled target is selected, so that the test can run. This is a bit more than is actually necessary, since bios-tables-test does not run for all UEFI-enabled targets, but it is the easiest way to write this logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210923105529.3845741-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
pc-bios/keymaps: Use the official xkb name for Arabic layout, not the legacy synonym The xkb official name for the Arabic keyboard layout is 'ara'. However xkb has for at least the past 15 years also permitted it to be named via the legacy synonym 'ar'. In xkeyboard-config 2.39 this synoynm was removed, which breaks compilation of QEMU: FAILED: pc-bios/keymaps/ar /home/fred/qemu-git/src/qemu/build-full/qemu-keymap -f pc-bios/keymaps/ar -l ar xkbcommon: ERROR: Couldn't find file "symbols/ar" in include paths xkbcommon: ERROR: 1 include paths searched: xkbcommon: ERROR: /usr/share/X11/xkb xkbcommon: ERROR: 3 include paths could not be added: xkbcommon: ERROR: /home/fred/.config/xkb xkbcommon: ERROR: /home/fred/.xkb xkbcommon: ERROR: /etc/xkb xkbcommon: ERROR: Abandoning symbols file "(unnamed)" xkbcommon: ERROR: Failed to compile xkb_symbols xkbcommon: ERROR: Failed to compile keymap The upstream xkeyboard-config change removing the compat mapping is: https://gitlab.freedesktop.org/xkeyboard-config/xkeyboard-config/-/commit/470ad2cd8fea84d7210377161d86b31999bb5ea6 Make QEMU always ask for the 'ara' xkb layout, which should work on both older and newer xkeyboard-config. We leave the QEMU name for this keyboard layout as 'ar'; it is not the only one where our name for it deviates from the xkb standard name. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20230620162024.1132013-1-peter.maydell@linaro.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1709 | 3 年前 | |
optionrom: Remove build-id section Our linker script for optionroms specifies only the placement of the .text section, leaving the linker free to place the remaining sections at arbitrary places in the file. Since at least binutils 2.39, the .note.gnu.build-id section is now being placed at the start of the file, which causes label addresses to be shifted. For linuxboot_dma.bin that means that the PnP header (among others) will not be found when determining the type of ROM at optionrom_setup(): (0x1c is the label _pnph, where the magic "PnP" is) $ xxd /usr/share/qemu/linuxboot_dma.bin | grep "PnP" 00000010: 0000 0000 0000 0000 0000 1c00 2450 6e50 ............$PnP $ xxd pc-bios/optionrom/linuxboot_dma.bin | grep "PnP" 00000010: 0000 0000 0000 0000 0000 4c00 2450 6e50 ............$PnP ^bad Using a freshly built linuxboot_dma.bin ROM results in a broken boot: SeaBIOS (version rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org) Booting from Hard Disk... Boot failed: could not read the boot disk Booting from Floppy... Boot failed: could not read the boot disk No bootable device. We're not using the build-id section, so pass the --build-id=none option to the linker to remove it entirely. Note: In theory, this same issue could happen with any other section. The ideal solution would be to have all unused sections discarded in the linker script. However that would be a larger change, specially for the pvh rom which uses the .bss and COMMON sections so I'm addressing only the immediate issue here. Reported-by: Vasiliy Ulyanov <vulyanov@suse.de> Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-ID: <20230926192502.15986-1-farosas@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 2 年前 | |
pc-bios/s390-ccw: Don't use __bss_start with the "larl" instruction start.S currently cannot be compiled with Clang 16 and binutils 2.40: ld: start.o(.text+0x8): misaligned symbol `__bss_start' (0xc1e5) for relocation R_390_PC32DBL According to the built-in linker script of ld, the symbol __bss_start can actually point *before* the .bss section and does not need to have any alignment, so in certain situations (like when using the internal assembler of Clang), the __bss_start symbol can indeed be unaligned and thus it is not suitable for being used with the "larl" instruction that needs an address that is at least aligned to halfwords. The problem went unnoticed so far since binutils <= 2.39 did not check the alignment, but starting with binutils 2.40, such unaligned addresses are now refused. Fix it by loading the address indirectly instead. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2216662 Reported-by: Miroslav Rezanina <mrezanin@redhat.com> Suggested-by: Andreas Krebbel <andreas.krebbel@de.ibm.com> Message-Id: <20230629104821.194859-8-thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
pc-bios/vof: Adopt meson style Make output Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20220929114231.583801-32-alex.bennee@linaro.org> | 3 年前 | |
sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM The CG3 framebuffer is a simple 8-bit framebuffer for use with operating systems such as early Solaris that do not have drivers for TCX. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com> | 12 年前 | |
Update OpenBIOS images Update OpenBIOS images to SVN r1321 built from submodule. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> | 11 年前 | |
pseries: Update SLOF firmware image It's been a while. This fixes compile warning, typos and a bug with virtio-serial being used after it was shutdown at "quiesce". The full changelog is here: Alexey Kardashevskiy (2): Remove ?PICK version: update to 20230918 Jordan Niethe (1): virtio-serial: Do not close stdout on quiesce Kautuk Consul (1): virtio-serial: Make read and write methods report failure Thomas Huth (10): lib/libnet/ipv6: Silence compiler warning from Clang Fix typos in the board-qemu folder Fix typos in the lib/libnet folder Fix typos in the remaining lib folders Fix typos in the slof folder Fix typos in the board-js2x folder Fix typos in the llfw folder Fix typos in the board-js2x folder Fix typos in the clients folder Fix remaining typos in various folders Compiled with gcc-12.1.0-nolibc Tested with (sorry, no KVM): /home/aik/b/q-slof/qemu-system-ppc64 \ -nodefaults \ -chardev stdio,id=STDIO0,signal=off,mux=on \ -device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \ -mon id=MON0,chardev=STDIO0,mode=readline \ -nographic \ -vga none \ -m 2G \ -kernel /home/aik/t/vml4150le \ -initrd /home/aik/t/le.cpio \ -machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \ -bios pc-bios/slof.bin \ -trace events=/home/aik/qemu_trace_events \ -d guest_errors \ -chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \ -mon chardev=SOCKET0,mode=control \ -name 604650,debug-threads=on [ npiggin: Also tested with KVM, including with virtio-console. ] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> | 2 年前 | |
PPC: Bamboo: recompile device tree Recent dtc doesn't compile our dts anymore. Change all hex numbers to have 0x prefixes, indicate the old version and recompile using recent dtc. This doesn't change any semantics in the device tree. Signed-off-by: Alexander Graf <agraf@suse.de> | 14 年前 | |
PPC: Bamboo: recompile device tree Recent dtc doesn't compile our dts anymore. Change all hex numbers to have 0x prefixes, indicate the old version and recompile using recent dtc. This doesn't change any semantics in the device tree. Signed-off-by: Alexander Graf <agraf@suse.de> | 14 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
ppc: Add aCube Sam460ex board Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. This is not a complete implementation yet with a lot of components still missing but enough for the U-Boot firmware to start and to boot a Linux kernel or AROS. Signed-off-by: François Revol <revol@free.fr> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | 8 年前 | |
ppc: Add aCube Sam460ex board Add emulation of aCube Sam460ex board based on AMCC 460EX embedded SoC. This is not a complete implementation yet with a lot of components still missing but enough for the U-Boot firmware to start and to boot a Linux kernel or AROS. Signed-off-by: François Revol <revol@free.fr> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | 8 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
pc-bios: add edk2 firmware binaries and variable store templates Add the files built by the last patch: (compressed) binaries, and the cumulative license text that covers them. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Philippe Mathieu-Daud� <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Philippe Mathieu-Daud� <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> | 7 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
pc-bios: add edk2 firmware binaries and variable store templates Add the files built by the last patch: (compressed) binaries, and the cumulative license text that covers them. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Philippe Mathieu-Daud� <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Philippe Mathieu-Daud� <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> | 7 年前 | |
pc-bios: refresh edk2 build artifacts for edk2-stable201905 Rebuild the pc-bios/edk2-*.fd.bz2 binaries, and regenerate pc-bios/edk2-licenses.txt, based on the edk2-stable201905 release. Cc: Philippe Mathieu-Daud� <philmd@redhat.com> Ref: https://bugs.launchpad.net/qemu/+bug/1831477 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daud� <philmd@redhat.com> Tested-by: Philippe Mathieu-Daud� <philmd@redhat.com> | 7 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
edk2: update binaries to edk2-stable202308 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
edk2: update binaries to git snapshot Resolves: #1990 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
ipxe: update binaries Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 5 年前 | |
target/hppa: Update SeaBIOS-hppa to version 15 SeaBIOS-hppa version 15: - Fix OpenBSD 7.4 boot (PDC_MEM_MAP call returned wrong values) SeaBIOS-hppa version 14 comes with those fixes: - Fix 32-bit HP-UX crash (fix in PDC_FIND_MODULE call) - Fix NetBSD boot (power button fix and add option to disable it) - Fix FPU detection on NetBSD - Add MEMORY_HPA module on B160L - Fix detection of mptsas and esp scsi controllers - Fix terminate DMA transfer in esp driver (Mark Cave-Ayland) - Allow booting from esp controller Signed-off-by: Helge Deller <deller@gmx.de> | 2 年前 | |
pc-bios: Remove execute flag from BIOS files BIOS files are not directly executable, so they don't need this flag. All other BIOS files don't use the execute flag. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> | 12 年前 | |
linuxboot: fix loading old kernels Old kernels that used high memory only allowed the initrd to be in the first 896MB of memory. If you load the initrd above, they complain that "initrd extends beyond end of memory". In order to fix this, while not breaking machines with small amounts of memory fixed by cdebec5 (linuxboot: compute initrd loading address, 2014-10-06), we need to distinguish two cases. If pc.c placed the initrd at end of memory, use the new algorithm based on the e801 memory map. If instead pc.c placed the initrd at the maximum address specified by the bzImage, leave it there. The only interesting part is that the low-memory info block is now loaded very early, in real mode, and thus the 32-bit address has to be converted into a real mode segment. The initrd address is also patched in the info block before entering real mode, it is simpler that way. This fixes booting the RHEL4.8 32-bit installation image with 1GB of RAM. Cc: qemu-stable@nongnu.org Cc: mst@redhat.com Cc: jsnow@redhat.com Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 11 年前 | |
linuxboot_dma: compile for i486 The ROM uses the cmovne instruction, which is new in Pentium Pro and does not work when running QEMU with "-cpu 486". Avoid producing that instruction. Suggested-by: Richard W.M. Jones <rjones@redhat.com> Suggested-by: Thomas Huth <thuth@redhat.com> Reported-by: Rob Landley <rob@landley.net> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 8 年前 | |
meson: compile bundled device trees If dtc is available, compile the .dts files in the pc-bios directory instead of using the precompiled binaries. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 2 年前 | |
pc-bios: Remove execute flag from BIOS files BIOS files are not directly executable, so they don't need this flag. All other BIOS files don't use the execute flag. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> | 12 年前 | |
optionrom: add a DMA-enabled multiboot ROM Add a new option rom for the multiboot loader, using DMA transfers to copy data instead of "rep insb". This significantly lowers QEMU's startup latency by a factor of about 40, for example, going from 30sec to 0.8sec when loading modules of 120MB in size. Signed-off-by: Marcus Hähnel <marcus.haehnel@kernkonzept.com> Signed-off-by: Adam Lackorzynski <adam@l4re.org> [Modified to keep the non-DMA code depending on #ifdef USE_FW_CFG_DMA; do not write below stack. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
roms: Add virtual Boot ROM for NPCM7xx SoCs This is a minimalistic boot ROM written specifically for use with QEMU. It supports loading the second-stage loader from SPI flash into RAM, SMP boot, and not much else. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-7-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 5 年前 | |
roms/openbios: update OpenBIOS images to af97fd7a built from submodule Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> | 3 年前 | |
roms/openbios: update OpenBIOS images to af97fd7a built from submodule Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> | 3 年前 | |
roms/openbios: update OpenBIOS images to af97fd7a built from submodule Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> | 3 年前 | |
roms/opensbi: Upgrade from v1.3.1 to v1.4 Upgrade OpenSBI from v1.3.1 to v1.4 and the pre-built bios images. The v1.4 release includes the following commits: 1a398d9 lib: sbi: Add Zicntr as a HART ISA extension 669089c lib: sbi: Add Zihpm as a HART ISA extension 72b9c8f lib: sbi: Alphabetically sort HART ISA extensions 5359fc6 lib: sbi: Rename hart_pmu_get_allowed_bits() function 976895c lib: sbi: Fix Priv spec version for [m|s]counteren and mcountinhibit CSRs 6053917 lib: sbi: Fix how print gets flags 35ef182 lib: sbi: print not fill '0' when left-aligned 40dac06 lib: sbi: Add '+' flags for print 458fa74 lib: sbi: Add ' ' '\'' flags for print 05cbb6e lib: sbi: implifying the parameters of printi fe08281 lib: sbi: print add 'o' type c6ee5ae lib: sbi: Fix printi 3b6fcdd lib: sbi: Simplify prints cc89fa7 lib: sbi: Fix printc ff43168 lib: sbi: Fix timing of clearing tbuf a73982d lib: sbi: Fix missing '\0' when buffer szie equal 1 ea6533a lib: utils/gpio: Fix RV32 compile error for designware GPIO driver c3b98c6 include: sbi: Add macro definitions for mseccfg CSR 1c099c4 lib: sbi: Add functions to manipulate PMP entries 6c202c5 include: sbi: Add Smepmp specific access flags for PMP entries cbcfc7b lib: sbi: Add smepmp in hart extensions d72f5f1 lib: utils: Add detection of Smepmp from ISA string in FDT 4a42a23 lib: sbi: Grant SU R/W/X permissions to whole memory f3fdd04 lib: sbi: Change the order of PMP initialization 5dd8db5 lib: sbi: Add support for Smepmp 6e44ef6 lib: sbi: Add functions to map/unmap shared memory 0ad8660 lib: sbi: Map/Unmap debug console shared memory buffers 057eb10 lib: utils/gpio: Fix RV32 compile error for designware GPIO driver 0e2111e libfdt: fix SPDX license identifiers e05a9cf lib: sbi: Update system suspend to spec 5e20d25 include: sbi: fix CSR define of mseccfg 44c5151 include: sbi_utils: Remove driver pointer from struct i2c_adapter 14a35b0 lib: utils/regmap: Add generic regmap access library 8e97275 lib: utils/regmap: Add simple FDT based regmap framework f21d8f7 lib: utils/regmap: Add simple FDT based syscon regmap driver 4a344a9 lib: utils/reset: Add syscon based reboot and poweroff c2e6027 lib: utils/reset: Remove SiFive Test reset driver f536e0b gitignore: allow gitignore to ignore most dot file c744ed7 lib: sbi_pmu: Enable noncontigous hpm event and counters 6259b2e lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation f46a564 lib: sbi: Fix typo for finding fixed event counter 94197a8 fw_base.S: Fix assembler error with clang 16+ c104c60 lib: sbi: Add support for smcntrpmf 7aabeee Makefile: Fix grep warning e7e73aa platform: generic: allwinner: correct mhpmevent count ee1f83c lib: sbi_pmu: remove mhpm_count field in hart feature a9cffd6 firmware: payload: test: Change to SBI v2.0 DBCN ecalls b20bd47 lib: sbi: improve the definition of SBI_IPI_EVENT_MAX 664692f lib: sbi_pmu: ensure update hpm counter before starting counting c9a296d platform: generic: allwinner: fix OF process for T-HEAD c9xx pmu 901d3d7 lib: sbi_pmu: keep overflow interrupt of stopped hpm counter disabled cacfba3 platform: Allow platforms to specify the size of tlb fifo 5bd9694 lib: sbi: alloc tlb fifo by sbi_malloc 130e65d lib: sbi: Implement SET_FS_DIRTY() to make sure the mstatus FS dirty is set d1e4dff lib: sbi: Introduce HART index in sbi_scratch e6125c3 lib: sbi: Remove sbi_platform_hart_index/invalid() functions 296e70d lib: sbi: Extend sbi_hartmask to support both hartid and hartindex e632cd7 lib: sbi: Use sbi_scratch_last_hartindex() in remote TLB managment 78c667b lib: sbi: Prefer hartindex over hartid in IPI framework 22d6ff8 lib: sbi: Remove sbi_scratch_last_hartid() macro 112daa2 lib: sbi: Maximize the use of HART index in sbi_domain 9560fb3 include: sbi: Remove sbi_hartmask_for_each_hart() macro b8fb96e include: sbi_domain: Fix permission test macros bff27c1 lib: sbi: Factor-out Smepmp configuration as separate function 5240d31 lib: sbi: Don't clear mseccfg.MML bit in sbi_hart_smepmp_configure() 2b51a9d lib: sbi: Fix pmp_flags for Smepmp read-only shared region 73aea28 lib: sbi: Populate M-only Smepmp entries before setting mseccfg.MML e8bc162 lib: utils/serial: Add shared regions for serial drivers b7e9d34 lib: utils/regmap: Mark syscon region as shared read-write 3669153 platform: generic: thead: fix stale TLB entries for th1520/sg2042 de525ac firmware: Remove ALIGN in .rela.dyn in linker script 2a6d725 firmware: Remove handling of R_RISCV_{32,64} 6ed125a Makefile: Add --exclude-libs ALL to avoid .dynsym e21901d doc: Fix fw_payload.md a125423 lib: utils/serial: Ensure proper allocation of PMP entries for uart8250 d36709f lib: utils: timer/ipi: Update memregion flags for PLMT and PLICSW 8197c2f lib: sbi: fix sbi_domain_get_assigned_hartmask() 9da30f6 lib: utils/fdt: simplify dt_parse_isa_extensions 942aca2 lib: utils: Simplify SET_ISA_EXT_MAP() f831b93 lib: sbi_pmu: check for index overflows d891cae gpio/starfive: redundant readl() call e8114c6 docs: platform: update platform_requirements.md 3632f2b lib: sbi: Add support for mconfigptr ec0559e lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP cbdd869 include: sbi: Change spec version to 2.0 5d0ed1b lib: sbi: simplify sanitize_domain() c1a6987 platform: generic: thead: move to thead c9xx header to vendor specific postion 8e941e7 platform: generic: thead: separate implement of T-HEAD c9xx pmu 492d9b1 platform: generic: thead: separate implement of T-HEAD c9xx errata 3e21b96 platform: generic: thead: initialize PMU by default in thead generic platform a140a4e lib: sbi: Correctly limit flushes to a single ASID/VMID 88ae718 platform: generic: thead: improve tlb flush errata 52fd64b platform: Uses hart count as the default size of tlb info 07f2ccd lib: utils/serial: Optimize semihosting_putc implementation fccdf41 firmware: fw_base.S: Fix boot hart status synchronization d1e0f7f utils/reset: Remove fdt_reset_thead 896d2c9 lib: utils/timer: Allow ACLINT MTIMER driver to setup quirks accafb1 lib: utils/timer: mtimer: add separate T-Head C9xx CLINT mtimer compatible 98bc25f lib: utils/ipi: mswi: add separate T-Head C9xx CLINT mswi compatible 5b2f55d lib: sbi: separate the swap operation of domain region 3b03cdd lib: sbi: Add regions merging when sanitizing domain region 2bfdb9e platform: generic: Add Sophgo sg2042 platform support 280f7ae include: sbi: macros for mseccfg.sseed and .useed efcac33 lib: sbi: Add Zkr in hart extensions 6e5b0cf lib: sbi: enable seed access in S-mode 6602e11 lib: sbi: change sbi_hart_features.extensions as an array 3aaed4f lib: sbi: Make console_puts/console_putc interchangeable dc0bb19 lib: utils/serial: remove semihosting_putc 16bb930 lib: sbi: Fix PMP granularity handling in sbi_hart_map_saddr() 574b9c8 lib: sbi_pmu: avoid buffer overflow 791704c lib: utils/irqchip: Avoid redundant writes to APLIC CLRIE register f520256 lib: sbi: Allow relaxed MMIO writes in device ipi_send() callback b70d628 lib: sbi: Allow relaxed MMIO writes in device ipi_clear() callback bd74931 lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme 291403f sbi: sbi_pmu: Improve sbi_pmu_init() error handling 090fa99 lib: sbi: Add XAndesPMU in hart extensions a48f2cf sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device 51ec60c platform: include: andes45: Add PMU related CSR defines effd89a platform: generic: Introduce pmu_init() platform override 1b9e743 platform: andes: Add Andes custom PMU support 2e50c24 platform: andes: Enable Andes PMU for AE350 535c661 platform: rzfive: Enable Andes PMU for RZ/Five 0b3262e lib: utils: fdt_fixup: Allow preserving PMU properties 009ae4e platform: andes: Factor out is_andes() helper 0308f93 lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable e19d419 lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table d162009 docs: pmu: Add Andes PMU node example 6b9a849 lib: sbi: Remove xchg/cmpxchg implemented via lr/sc 11bf49b lib: sbi: Fix __atomic_op_bit_ord and comments 8839869 lib: sbi: Replace __atomic_op_bit_ord with __atomic intrinsics 07419ec lib: sbi: Prevent redundant sbi_ipi_process 93da66b lib: sbi_hart: Store PMP granularity as log base 2 ee72517 lib: sbi_pmu: Add PMU snapshot definitions 11a0ba5 lib: sbi_pmu: Fix the counter info function 0696810 firmware: fix section types a25fc74 lib: sbi_hsm: Put the resume_pending hart in the interruptible hart mask 87aa306 platform: recalculate heap size to support new tlb entry number a2e254e lib: sbi: skip wait_for_coldboot when coolboot done 6112d58 lib: utils/fdt: Allow to use reg-names when parsing ACLINT 35cba92 lib: sbi_tlb: Check tlb_range_flush_limit only once per request a894187 lib: sbi_ipi: Do not ignore errors from sbi_ipi_send() 446fa65 lib: sbi_ipi: Process self-IPIs in sbi_ipi_send() 2707250 lib: sbi_ipi: Drop unnecessary ipi_process check 925ce14 lib: sbi: Simplify the initialization of root_hmask in sbi_domain_init 2c8be56 lib: sbi: Improve the code of privilege mode and extensions detection 056fe6f lib: sbi: Refactor the code for enable extensions in menvfg CSR 776770d lib: sbi: Using one array to define the name of extensions 3daac8f lib: sbi: Detect extensions from the ISA string in DT 416ceb3 lib: sbi_tlb: Reduce size of struct sbi_tlb_info 80169b2 platform: generic: Fine tune fw_platform_calculate_heap_size() cdebae2 lib: utils/irqchip: Add shared MMIO region for PLIC in root domain 3284bea lib: sbi: Allow ecall handlers to directly update register state 5a57e8c lib: sbi: Remove the SBI_ETRAP error code 2b80b92 lib: sbi: Do not enter OpenSBI with mseccfg.MML == 1 63e09ad lib: sbi: Fix shift bug in sbi_system_reset ba29293 lib: utils/timer: mtimer: only use regname for aclint bbd065d lib: sbi: Detect Zicntr extension only based on traps a2b255b include: Bump-up version to 1.4 Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20240102151153.133896-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> | 2 年前 | |
roms/opensbi: Upgrade from v1.3.1 to v1.4 Upgrade OpenSBI from v1.3.1 to v1.4 and the pre-built bios images. The v1.4 release includes the following commits: 1a398d9 lib: sbi: Add Zicntr as a HART ISA extension 669089c lib: sbi: Add Zihpm as a HART ISA extension 72b9c8f lib: sbi: Alphabetically sort HART ISA extensions 5359fc6 lib: sbi: Rename hart_pmu_get_allowed_bits() function 976895c lib: sbi: Fix Priv spec version for [m|s]counteren and mcountinhibit CSRs 6053917 lib: sbi: Fix how print gets flags 35ef182 lib: sbi: print not fill '0' when left-aligned 40dac06 lib: sbi: Add '+' flags for print 458fa74 lib: sbi: Add ' ' '\'' flags for print 05cbb6e lib: sbi: implifying the parameters of printi fe08281 lib: sbi: print add 'o' type c6ee5ae lib: sbi: Fix printi 3b6fcdd lib: sbi: Simplify prints cc89fa7 lib: sbi: Fix printc ff43168 lib: sbi: Fix timing of clearing tbuf a73982d lib: sbi: Fix missing '\0' when buffer szie equal 1 ea6533a lib: utils/gpio: Fix RV32 compile error for designware GPIO driver c3b98c6 include: sbi: Add macro definitions for mseccfg CSR 1c099c4 lib: sbi: Add functions to manipulate PMP entries 6c202c5 include: sbi: Add Smepmp specific access flags for PMP entries cbcfc7b lib: sbi: Add smepmp in hart extensions d72f5f1 lib: utils: Add detection of Smepmp from ISA string in FDT 4a42a23 lib: sbi: Grant SU R/W/X permissions to whole memory f3fdd04 lib: sbi: Change the order of PMP initialization 5dd8db5 lib: sbi: Add support for Smepmp 6e44ef6 lib: sbi: Add functions to map/unmap shared memory 0ad8660 lib: sbi: Map/Unmap debug console shared memory buffers 057eb10 lib: utils/gpio: Fix RV32 compile error for designware GPIO driver 0e2111e libfdt: fix SPDX license identifiers e05a9cf lib: sbi: Update system suspend to spec 5e20d25 include: sbi: fix CSR define of mseccfg 44c5151 include: sbi_utils: Remove driver pointer from struct i2c_adapter 14a35b0 lib: utils/regmap: Add generic regmap access library 8e97275 lib: utils/regmap: Add simple FDT based regmap framework f21d8f7 lib: utils/regmap: Add simple FDT based syscon regmap driver 4a344a9 lib: utils/reset: Add syscon based reboot and poweroff c2e6027 lib: utils/reset: Remove SiFive Test reset driver f536e0b gitignore: allow gitignore to ignore most dot file c744ed7 lib: sbi_pmu: Enable noncontigous hpm event and counters 6259b2e lib: utils/fdt: Fix fdt_parse_isa_extensions() implementation f46a564 lib: sbi: Fix typo for finding fixed event counter 94197a8 fw_base.S: Fix assembler error with clang 16+ c104c60 lib: sbi: Add support for smcntrpmf 7aabeee Makefile: Fix grep warning e7e73aa platform: generic: allwinner: correct mhpmevent count ee1f83c lib: sbi_pmu: remove mhpm_count field in hart feature a9cffd6 firmware: payload: test: Change to SBI v2.0 DBCN ecalls b20bd47 lib: sbi: improve the definition of SBI_IPI_EVENT_MAX 664692f lib: sbi_pmu: ensure update hpm counter before starting counting c9a296d platform: generic: allwinner: fix OF process for T-HEAD c9xx pmu 901d3d7 lib: sbi_pmu: keep overflow interrupt of stopped hpm counter disabled cacfba3 platform: Allow platforms to specify the size of tlb fifo 5bd9694 lib: sbi: alloc tlb fifo by sbi_malloc 130e65d lib: sbi: Implement SET_FS_DIRTY() to make sure the mstatus FS dirty is set d1e4dff lib: sbi: Introduce HART index in sbi_scratch e6125c3 lib: sbi: Remove sbi_platform_hart_index/invalid() functions 296e70d lib: sbi: Extend sbi_hartmask to support both hartid and hartindex e632cd7 lib: sbi: Use sbi_scratch_last_hartindex() in remote TLB managment 78c667b lib: sbi: Prefer hartindex over hartid in IPI framework 22d6ff8 lib: sbi: Remove sbi_scratch_last_hartid() macro 112daa2 lib: sbi: Maximize the use of HART index in sbi_domain 9560fb3 include: sbi: Remove sbi_hartmask_for_each_hart() macro b8fb96e include: sbi_domain: Fix permission test macros bff27c1 lib: sbi: Factor-out Smepmp configuration as separate function 5240d31 lib: sbi: Don't clear mseccfg.MML bit in sbi_hart_smepmp_configure() 2b51a9d lib: sbi: Fix pmp_flags for Smepmp read-only shared region 73aea28 lib: sbi: Populate M-only Smepmp entries before setting mseccfg.MML e8bc162 lib: utils/serial: Add shared regions for serial drivers b7e9d34 lib: utils/regmap: Mark syscon region as shared read-write 3669153 platform: generic: thead: fix stale TLB entries for th1520/sg2042 de525ac firmware: Remove ALIGN in .rela.dyn in linker script 2a6d725 firmware: Remove handling of R_RISCV_{32,64} 6ed125a Makefile: Add --exclude-libs ALL to avoid .dynsym e21901d doc: Fix fw_payload.md a125423 lib: utils/serial: Ensure proper allocation of PMP entries for uart8250 d36709f lib: utils: timer/ipi: Update memregion flags for PLMT and PLICSW 8197c2f lib: sbi: fix sbi_domain_get_assigned_hartmask() 9da30f6 lib: utils/fdt: simplify dt_parse_isa_extensions 942aca2 lib: utils: Simplify SET_ISA_EXT_MAP() f831b93 lib: sbi_pmu: check for index overflows d891cae gpio/starfive: redundant readl() call e8114c6 docs: platform: update platform_requirements.md 3632f2b lib: sbi: Add support for mconfigptr ec0559e lib: sbi_misaligned_ldst: Fix handling of C.SWSP and C.SDSP cbdd869 include: sbi: Change spec version to 2.0 5d0ed1b lib: sbi: simplify sanitize_domain() c1a6987 platform: generic: thead: move to thead c9xx header to vendor specific postion 8e941e7 platform: generic: thead: separate implement of T-HEAD c9xx pmu 492d9b1 platform: generic: thead: separate implement of T-HEAD c9xx errata 3e21b96 platform: generic: thead: initialize PMU by default in thead generic platform a140a4e lib: sbi: Correctly limit flushes to a single ASID/VMID 88ae718 platform: generic: thead: improve tlb flush errata 52fd64b platform: Uses hart count as the default size of tlb info 07f2ccd lib: utils/serial: Optimize semihosting_putc implementation fccdf41 firmware: fw_base.S: Fix boot hart status synchronization d1e0f7f utils/reset: Remove fdt_reset_thead 896d2c9 lib: utils/timer: Allow ACLINT MTIMER driver to setup quirks accafb1 lib: utils/timer: mtimer: add separate T-Head C9xx CLINT mtimer compatible 98bc25f lib: utils/ipi: mswi: add separate T-Head C9xx CLINT mswi compatible 5b2f55d lib: sbi: separate the swap operation of domain region 3b03cdd lib: sbi: Add regions merging when sanitizing domain region 2bfdb9e platform: generic: Add Sophgo sg2042 platform support 280f7ae include: sbi: macros for mseccfg.sseed and .useed efcac33 lib: sbi: Add Zkr in hart extensions 6e5b0cf lib: sbi: enable seed access in S-mode 6602e11 lib: sbi: change sbi_hart_features.extensions as an array 3aaed4f lib: sbi: Make console_puts/console_putc interchangeable dc0bb19 lib: utils/serial: remove semihosting_putc 16bb930 lib: sbi: Fix PMP granularity handling in sbi_hart_map_saddr() 574b9c8 lib: sbi_pmu: avoid buffer overflow 791704c lib: utils/irqchip: Avoid redundant writes to APLIC CLRIE register f520256 lib: sbi: Allow relaxed MMIO writes in device ipi_send() callback b70d628 lib: sbi: Allow relaxed MMIO writes in device ipi_clear() callback bd74931 lib: ipi: Adjust Andes PLICSW to single-bit-per-hart scheme 291403f sbi: sbi_pmu: Improve sbi_pmu_init() error handling 090fa99 lib: sbi: Add XAndesPMU in hart extensions a48f2cf sbi: sbi_pmu: Add hw_counter_filter_mode() to pmu device 51ec60c platform: include: andes45: Add PMU related CSR defines effd89a platform: generic: Introduce pmu_init() platform override 1b9e743 platform: andes: Add Andes custom PMU support 2e50c24 platform: andes: Enable Andes PMU for AE350 535c661 platform: rzfive: Enable Andes PMU for RZ/Five 0b3262e lib: utils: fdt_fixup: Allow preserving PMU properties 009ae4e platform: andes: Factor out is_andes() helper 0308f93 lib: utils: fdt_pmu: Make the fdt_pmu_evt_select table global variable e19d419 lib: utils: fdt_pmu: Do not iterate over the fdt_pmu_evt_select table d162009 docs: pmu: Add Andes PMU node example 6b9a849 lib: sbi: Remove xchg/cmpxchg implemented via lr/sc 11bf49b lib: sbi: Fix __atomic_op_bit_ord and comments 8839869 lib: sbi: Replace __atomic_op_bit_ord with __atomic intrinsics 07419ec lib: sbi: Prevent redundant sbi_ipi_process 93da66b lib: sbi_hart: Store PMP granularity as log base 2 ee72517 lib: sbi_pmu: Add PMU snapshot definitions 11a0ba5 lib: sbi_pmu: Fix the counter info function 0696810 firmware: fix section types a25fc74 lib: sbi_hsm: Put the resume_pending hart in the interruptible hart mask 87aa306 platform: recalculate heap size to support new tlb entry number a2e254e lib: sbi: skip wait_for_coldboot when coolboot done 6112d58 lib: utils/fdt: Allow to use reg-names when parsing ACLINT 35cba92 lib: sbi_tlb: Check tlb_range_flush_limit only once per request a894187 lib: sbi_ipi: Do not ignore errors from sbi_ipi_send() 446fa65 lib: sbi_ipi: Process self-IPIs in sbi_ipi_send() 2707250 lib: sbi_ipi: Drop unnecessary ipi_process check 925ce14 lib: sbi: Simplify the initialization of root_hmask in sbi_domain_init 2c8be56 lib: sbi: Improve the code of privilege mode and extensions detection 056fe6f lib: sbi: Refactor the code for enable extensions in menvfg CSR 776770d lib: sbi: Using one array to define the name of extensions 3daac8f lib: sbi: Detect extensions from the ISA string in DT 416ceb3 lib: sbi_tlb: Reduce size of struct sbi_tlb_info 80169b2 platform: generic: Fine tune fw_platform_calculate_heap_size() cdebae2 lib: utils/irqchip: Add shared MMIO region for PLIC in root domain 3284bea lib: sbi: Allow ecall handlers to directly update register state 5a57e8c lib: sbi: Remove the SBI_ETRAP error code 2b80b92 lib: sbi: Do not enter OpenSBI with mseccfg.MML == 1 63e09ad lib: sbi: Fix shift bug in sbi_system_reset ba29293 lib: utils/timer: mtimer: only use regname for aclint bbd065d lib: sbi: Detect Zicntr extension only based on traps a2b255b include: Bump-up version to 1.4 Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20240102151153.133896-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> | 2 年前 | |
pc-bios: Update the palcode-clipper image Build a new palcode image with Jason Thorpe's patches to support NetBSD. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 5 年前 | |
microblaze: petalogix-ml605: Add device-tree source Add a device-tree source for petalogix-ml605 and recompile the DTB. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> | 5 年前 | |
microblaze: petalogix-ml605: Add device-tree source Add a device-tree source for petalogix-ml605 and recompile the DTB. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> | 5 年前 | |
microblaze: petalogix-s3adsp1800: Add device-tree source Add a device-tree source for petalogix-s3adsp1800 and recompile the DTB. This also removes the unused mpmc node which causes compilation warnings. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> | 5 年前 | |
microblaze: petalogix-s3adsp1800: Add device-tree source Add a device-tree source for petalogix-s3adsp1800 and recompile the DTB. This also removes the unused mpmc node which causes compilation warnings. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> | 5 年前 | |
optionrom/pvh: load initrd from fw_cfg If we found initrd through fw_cfg, we can load it and use the first module of hvm_start_info to pass initrd address and size to the kernel. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Based-on: <1547554687-12687-1-git-send-email-liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 7 年前 | |
PXE: Refresh all PXE ROMs from the ipxe submodule Add script to make this easy to repeat later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 15 年前 | |
PXE: Refresh all PXE ROMs from the ipxe submodule Add script to make this easy to repeat later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 15 年前 | |
PXE: Refresh all PXE ROMs from the ipxe submodule Add script to make this easy to repeat later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 15 年前 | |
PXE: Refresh all PXE ROMs from the ipxe submodule Add script to make this easy to repeat later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 15 年前 | |
PXE: Refresh all PXE ROMs from the ipxe submodule Add script to make this easy to repeat later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 15 年前 | |
PXE: Refresh all PXE ROMs from the ipxe submodule Add script to make this easy to repeat later. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> | 15 年前 | |
qboot: rebuild based on latest commit df22fbb751 ("qboot: update to latest submodule") updated the qboot submodule from a5300c49 to 8ca302e8. However, qboot isn't built during the QEMU's build process but rather is included in binary form. So rebuild it here. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [Rebuilt it myself for paranoia. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 3 年前 | |
w32, w64: Add build rule for installer The new rules in Makefile allow building installers for QEMU on Windows using NSIS, a package which is also available for Linux distributions (so cross builds are possible). The rules for NSIS are in qemu.nsi which also uses two new images. Signed-off-by: Stefan Weil <sw@weilnetz.de> | 12 年前 | |
w32, w64: Add build rule for installer The new rules in Makefile allow building installers for QEMU on Windows using NSIS, a package which is also available for Linux distributions (so cross builds are possible). The rules for NSIS are in qemu.nsi which also uses two new images. Signed-off-by: Stefan Weil <sw@weilnetz.de> | 12 年前 | |
Makefile.target: set icon for binary file on Mac OS X Implements setting the icon for the binary file in Mac OS X. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> [PMM: tweaked makefile to use $@ and quiet-command] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> | 11 年前 | |
Add QEMU logo (SVG file) The "Q" of the logo is already included in pc-bios/qemu_logo_no_text.svg. This file now adds the complete logo as it was designed by Benoît Canet. Benoît licensed it under CC-BY 3.0, see http://lists.gnu.org/archive/html/qemu-devel/2012-02/msg02865.html. Unneeded borders from Benoît's original logo were removed, and metadata (license, author, date) was added in this version. Cc: Benoît Canet <benoit@irqsave.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> | 12 年前 | |
QemuMacDrivers: update qemu_vga.ndrv to 90c488d built from submodule This update to qemu_vga.ndrv includes the following changes: - Build guest resolution list from QEMU EDID data if enabled - Fixes to re-enable 256 color mode Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | 7 年前 | |
pc-bios: Update the s390 bios images with the recent changes The startup code of the bios has slightly been changed, apart from that, there should not be any functional changes this time. Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
pc-bios: Update the s390 bios images with the recent changes The startup code of the bios has slightly been changed, apart from that, there should not be any functional changes this time. Signed-off-by: Thomas Huth <thuth@redhat.com> | 3 年前 | |
ppc/pnv: Update skiboot to v7.0 This is skiboot 7.0 (commit 76b349cf7b40). Built using gcc 11.2.0 and binutils 2.38. Changes since the previous version: Christophe Lombard (15): npu2: move opal api pau: introduce support rainier: detect pau devices pau: assign bars pau: create phb pau: enabling opencapi pau: translation layer configuration pau: enable interrupt on error pau: complete phb ops pau: hmi scom dump pau: phy init pau: link training pau: update current opal call functions pau: mmio invalidates pau: Add support for OpenCAPI Persistent Memory devices. Cédric Le Goater (4): xive/p10: Fix xive_special_cache_check when DEBUG=1 xive/p10: Fix mismatch errors when DEBUG=1 interrupts: Do not advertise XICS support on P10 skiboot v6.6.6 release notes Frederic Barrat (6): phb4/5: Escalate page-level TCE kills npu3: Remove GPU support on Swift phb5: Remove obsolete capp-related properties xive/p10:: Declare xive2 DT node as an interrupt-controller skiboot v6.0.24 release notes opal-api: Drop diagnostics data type symbol for PHB5 Michael Ellerman (3): external/mambo: Print more info when the kernel is too big doc: Make it clear all existing platforms use Power9N docs: Add Swift, Mowgli & Rainier Nicholas Piggin (12): external/mambo: Updates for POWER10 configuration for DD2.0 external/mambo: Updates POWER9 SIM_CTRL1 to remove hardware atomic RC external/mambo: Add POWER10 small-core mode HBRT: fix clobbered r16 when host services handlers are called interrupts: add_opal_interrupts avoid NULL dereference on P10 mambo cpu: cpu_idle_job SMT priority fix cpu: add debug check in cpu_relax asm/head: Fix P10 HILE for little endian build phb4: annotate tbl_pest with endian types Remove support for POWER8 DD1 phb3: make endian-clean flash: AST BMC endian fixes Nick Child (1): secvar: Free md context on hash error Ryan Grimm (1): AWAN simulator support for P10 Vasant Hegde (5): ci: Bump qemu version hello_world: Add p10 mambo tests skiboot v6.7.3 release notes skiboot v6.8.1 release notes skiboot v7.0 release notes Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> | 4 年前 | |
pseries: Update SLOF firmware image It's been a while. This fixes compile warning, typos and a bug with virtio-serial being used after it was shutdown at "quiesce". The full changelog is here: Alexey Kardashevskiy (2): Remove ?PICK version: update to 20230918 Jordan Niethe (1): virtio-serial: Do not close stdout on quiesce Kautuk Consul (1): virtio-serial: Make read and write methods report failure Thomas Huth (10): lib/libnet/ipv6: Silence compiler warning from Clang Fix typos in the board-qemu folder Fix typos in the lib/libnet folder Fix typos in the remaining lib folders Fix typos in the slof folder Fix typos in the board-js2x folder Fix typos in the llfw folder Fix typos in the board-js2x folder Fix typos in the clients folder Fix remaining typos in various folders Compiled with gcc-12.1.0-nolibc Tested with (sorry, no KVM): /home/aik/b/q-slof/qemu-system-ppc64 \ -nodefaults \ -chardev stdio,id=STDIO0,signal=off,mux=on \ -device spapr-vty,id=svty0,reg=0x71000110,chardev=STDIO0 \ -mon id=MON0,chardev=STDIO0,mode=readline \ -nographic \ -vga none \ -m 2G \ -kernel /home/aik/t/vml4150le \ -initrd /home/aik/t/le.cpio \ -machine pseries,cap-cfpc=broken,cap-sbbc=broken,cap-ibs=broken,cap-ccf-assist=off \ -bios pc-bios/slof.bin \ -trace events=/home/aik/qemu_trace_events \ -d guest_errors \ -chardev socket,id=SOCKET0,server=on,wait=off,path=qemu.mon.604650 \ -mon chardev=SOCKET0,mode=control \ -name 604650,debug-threads=on [ npiggin: Also tested with KVM, including with virtio-console. ] Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> | 2 年前 | |
trivial: Make bios files and source files non-executable These files can not be executed on the host, so they should not be marked as executable. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 7 年前 | |
roms/u-boot: Bump ppce500 u-boot to v2021.07 to add eTSEC support Update the QEMU shipped u-boot.e500 image built from U-Boot mainline v2021.07 release, which added eTSEC support to the QEMU ppce500 target, via the following U-Boot series: http://patchwork.ozlabs.org/project/uboot/list/?series=233875&state=* The cross-compilation toolchain used to build the U-Boot image is: https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/10.1.0/x86_64-gcc-10.1.0-nolibc-powerpc-linux.tar.xz Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | 4 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
seabios: update binaries to 1.16.3 release Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> | 2 年前 | |
spapr: Implement Open Firmware client interface The PAPR platform describes an OS environment that's presented by a combination of a hypervisor and firmware. The features it specifies require collaboration between the firmware and the hypervisor. Since the beginning, the runtime component of the firmware (RTAS) has been implemented as a 20 byte shim which simply forwards it to a hypercall implemented in qemu. The boot time firmware component is SLOF - but a build that's specific to qemu, and has always needed to be updated in sync with it. Even though we've managed to limit the amount of runtime communication we need between qemu and SLOF, there's some, and it has become increasingly awkward to handle as we've implemented new features. This implements a boot time OF client interface (CI) which is enabled by a new "x-vof" pseries machine option (stands for "Virtual Open Firmware). When enabled, QEMU implements the custom H_OF_CLIENT hcall which implements Open Firmware Client Interface (OF CI). This allows using a smaller stateless firmware which does not have to manage the device tree. The new "vof.bin" firmware image is included with source code under pc-bios/. It also includes RTAS blob. This implements a handful of CI methods just to get -kernel/-initrd working. In particular, this implements the device tree fetching and simple memory allocator - "claim" (an OF CI memory allocator) and updates "/memory@0/available" to report the client about available memory. This implements changing some device tree properties which we know how to deal with, the rest is ignored. To allow changes, this skips fdt_pack() when x-vof=on as not packing the blob leaves some room for appending. In absence of SLOF, this assigns phandles to device tree nodes to make device tree traversing work. When x-vof=on, this adds "/chosen" every time QEMU (re)builds a tree. This adds basic instances support which are managed by a hash map ihandle -> [phandle]. Before the guest started, the used memory is: 0..e60 - the initial firmware 8000..10000 - stack 400000.. - kernel 3ea0000.. - initramdisk This OF CI does not implement "interpret". Unlike SLOF, this does not format uninitialized nvram. Instead, this includes a disk image with pre-formatted nvram. With this basic support, this can only boot into kernel directly. However this is just enough for the petitboot kernel and initradmdisk to boot from any possible source. Note this requires reasonably recent guest kernel with: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=df5be5be8735 The immediate benefit is much faster booting time which especially crucial with fully emulated early CPU bring up environments. Also this may come handy when/if GRUB-in-the-userspace sees light of the day. This separates VOF and sPAPR in a hope that VOF bits may be reused by other POWERPC boards which do not support pSeries. This assumes potential support for booting from QEMU backends such as blockdev or netdev without devices/drivers used. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20210625055155.2252896-1-aik@ozlabs.ru> Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu> [dwg: Adjusted some includes which broke compile in some more obscure compilation setups] Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | 4 年前 | |
spapr: Fix implementation of Open Firmware client interface This addresses the comments from v22. The functional changes are (the VOF ones need retesting with Pegasos2): (VOF) setprop will start failing if the machine class callback did not handle it; (VOF) unit addresses are lowered in path_offset(); (SPAPR) /chosen/bootargs is initialized from kernel_cmdline if the client did not change it. Fixes: 5c991e5d4378 ("spapr: Implement Open Firmware client interface") Cc: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Message-Id: <20210708065625.548396-1-aik@ozlabs.ru> Tested-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> | 4 年前 |
