SStefan Hajnoczisystem/cpus: rename qemu_mutex_lock_iothread() to bql_lock()
| 文件 | 最后提交记录 | 最后更新时间 |
|---|---|---|
meson: Introduce target-specific Kconfig Add a target-specific Kconfig. We need the definitions in Kconfig so the minikconf tool can verify they exits. However CONFIG_FOO is only enabled for target foo via the meson.build rules. Two architecture have a particularity, ARM and MIPS. As their translators have been split you can potentially build a plain 32 bit build along with a 64-bit version including the 32-bit subset. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210131111316.232778-6-f4bug@amsat.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 4 年前 | |
other architectures: spelling fixes Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> | 2 年前 | |
target/sparc: Remove sparcv7 cpu features The oldest supported cpu is the microsparc 1; all other cpus use CPU_DEFAULT_FEATURES. Remove the features that must always be present for sparcv7: FLOAT, SWAP, FLUSH, FSQRT, FMUL. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Remove NB_MMU_MODES define Signed-off-by: Anton Johansson <anjo@rev.ng> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230306175230.7110-21-anjo@rev.ng> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 3 年前 | |
target: Move ArchCPUClass definition to 'cpu.h' The OBJECT_DECLARE_CPU_TYPE() macro forward-declares each ArchCPUClass type. These forward declarations are sufficient for code in hw/ to use the QOM definitions. No need to expose these structure definitions. Keep each local to their target/ by moving them to the corresponding "cpu.h" header. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231013140116.255-13-philmd@linaro.org> | 2 年前 | |
target/sparc: Remove CC_OP leftovers All instructions have been converted to generate full condition codes explicitly. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Simplify qemu_irq_ack This is a simple cleanup, since env is passed to qemu_irq_ack it can be accessed from inside qemu_irq_ack. Just drop this parameter. Co-developed-by: Frederic Konrad <konrad.frederic@yahoo.fr> Signed-off-by: Clément Chigot <chigot@adacore.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240105102421.163554-7-chigot@adacore.com> | 2 年前 | |
target/sparc: Merge LDFSR, LDXFSR implementations Combine the helper to a single set_fsr(). Perform the mask and merge inline. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
gdbstub: move register helpers into standalone include These inline helpers are all used by target specific code so move them out of the general header so we don't needlessly pollute the rest of the API with target specific stuff. Note we have to include cpu.h in semihosting as it was relying on a side effect before. Reviewed-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230302190846.2593720-21-alex.bennee@linaro.org> Message-Id: <20230303025805.625589-21-richard.henderson@linaro.org> | 3 年前 | |
target/sparc: Implement UDIVX and SDIVX inline Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Implement UDIVX and SDIVX inline Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Implement UDIV inline Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock() The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> | 2 年前 | |
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock() The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> | 2 年前 | |
target/sparc: Avoid helper_raise_exception in helper_st_asi Always use cpu_raise_exception_ra with GETPC for unwind. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Constify VMState in machine.c Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-18-richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Remove CC_OP leftovers All instructions have been converted to generate full condition codes explicitly. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Use tlb_set_page_full Pass CPUTLBEntryFull to get_physical_address instead of a collection of pointers. Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 3 年前 | |
target/sparc: Handle FPRS correctly on big-endian hosts In CPUSparcState we define the fprs field as uint64_t. However we then refer to it in translate.c via a TCGv_i32 which we set up with tcg_global_mem_new_ptr(). This means that on a big-endian host when the guest does something to writo te the FPRS register this value ends up in the wrong half of the uint64_t, and the QEMU C code that refers to env->fprs sees the wrong value. The effect of this is that guest code that enables the FPU crashes with spurious FPU Disabled exceptions. In particular, this is why tests/avocado/machine_sparc64_sun4u.py:Sun4uMachine.test_sparc64_sun4u times out on an s390 host. There are multiple ways we could fix this; since there are actually only three bits in the FPRS register and the code in translate.c would be a bit painful to convert to dealing with a TCGv_i64, change the type of the CPU state struct field to match what translate.c is expecting. (None of the other fields referenced by the r32[] array in sparc_tcg_init() have the wrong type.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Message-Id: <20230717103544.637453-1-peter.maydell@linaro.org> | 2 年前 | |
docs: fix references to docs/devel/tracing.rst Commit e50caf4a5c ("tracing: convert documentation to rST") converted docs/devel/tracing.txt to docs/devel/tracing.rst. We still have several references to the old file, so let's fix them with the following command: sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt) Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210517151702.109066-2-sgarzare@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com> | 5 年前 | |
trace: switch position of headers to what Meson requires Meson doesn't enjoy the same flexibility we have with Make in choosing the include path. In particular the tracing headers are using $(build_root)/$(<D). In order to keep the include directives unchanged, the simplest solution is to generate headers with patterns like "trace/trace-audio.h" and place forwarding headers in the source tree such that for example "audio/trace.h" includes "trace/trace-audio.h". This patch is too ugly to be applied to the Makefiles now. It's only a way to separate the changes to the tracing header files from the Meson rewrite of the tracing logic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 5 年前 | |
target/sparc: Fix RETURN Perform window restore before pc update. Required in order to recognize any window underflow trap with the current pc. Fixes: 86b82fe021f4 ("target/sparc: Move JMPL, RETT, RETURN to decodetree") Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
target/sparc: Use tcg_gen_vec_{add,sub}* Replace the local helpers for the same integer operations. Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> | 2 年前 | |
system/cpus: rename qemu_mutex_lock_iothread() to bql_lock() The Big QEMU Lock (BQL) has many names and they are confusing. The actual QemuMutex variable is called qemu_global_mutex but it's commonly referred to as the BQL in discussions and some code comments. The locking APIs, however, are called qemu_mutex_lock_iothread() and qemu_mutex_unlock_iothread(). The "iothread" name is historic and comes from when the main thread was split into into KVM vcpu threads and the "iothread" (now called the main loop thread). I have contributed to the confusion myself by introducing a separate --object iothread, a separate concept unrelated to the BQL. The "iothread" name is no longer appropriate for the BQL. Rename the locking APIs to: - void bql_lock(void) - void bql_unlock(void) - bool bql_locked(void) There are more APIs with "iothread" in their names. Subsequent patches will rename them. There are also comments and documentation that will be updated in later patches. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Acked-by: Fabiano Rosas <farosas@suse.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Peter Xu <peterx@redhat.com> Acked-by: Eric Farman <farman@linux.ibm.com> Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com> Acked-by: Hyman Huang <yong.huang@smartx.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20240102153529.486531-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> | 2 年前 |